@funnycode/myclaude 0.1.55 → 0.1.60

package/seed/marketplaces/ecc/skills/homelab-vlan-segmentation/SKILL.md

@@ -1,311 +1,311 @@
----
-name: homelab-vlan-segmentation
-description: Segmenting home networks into VLANs for IoT, guest, trusted, and server traffic using UniFi, pfSense/OPNsense, and MikroTik — including switch trunk config, firewall rules, and wireless SSID mapping.
-origin: community
----
-
-# Homelab VLAN Segmentation
-
-How to split a home network into isolated VLANs so IoT devices, guests, and your main
-PCs cannot talk to each other. The most impactful security upgrade for a home network.
-
-All firewall rules shown here add isolation between segments — they do not remove
-existing protections. Apply changes in a maintenance window and verify connectivity
-between segments after each step before moving on.
-
-## When to Use
-
-- Setting up VLANs on a home network for the first time
-- Isolating IoT devices (smart bulbs, cameras, TVs) from trusted devices
-- Creating a guest Wi-Fi network that cannot reach home devices
-- Explaining how VLANs work to someone unfamiliar with the concept
-- Configuring trunk ports, access ports, and SSID-to-VLAN mapping
-- Troubleshooting inter-VLAN routing or firewall rule issues on pfSense/OPNsense/UniFi
-
-## How It Works
-
-```
-Without VLANs — flat network:
-  All devices on 192.168.1.0/24
-  Smart TV (potential malware) → can reach your NAS, PCs, everything
-
-With VLANs:
-  VLAN 10 — Trusted    192.168.10.0/24  (PCs, phones, laptops)
-  VLAN 20 — IoT        192.168.20.0/24  (smart TV, bulbs, cameras)
-  VLAN 30 — Servers    192.168.30.0/24  (NAS, Pi, VMs)
-  VLAN 40 — Guest      192.168.40.0/24  (visitor Wi-Fi)
-  VLAN 99 — Management 192.168.99.0/24  (switch/AP web UIs)
-
-  Smart TV → blocked from reaching 192.168.10.0/24 and 192.168.30.0/24
-  Guests → internet only, cannot see any home devices
-```
-
-## VLAN Design Template
-
-```
-VLAN  Name        Subnet              Gateway         Purpose
-10    trusted     192.168.10.0/24     192.168.10.1    PCs, phones, laptops
-20    iot         192.168.20.0/24     192.168.20.1    Smart home devices
-30    servers     192.168.30.0/24     192.168.30.1    NAS, Pi, self-hosted
-40    guest       192.168.40.0/24     192.168.40.1    Visitor Wi-Fi
-99    management  192.168.99.0/24     192.168.99.1    Network gear web UIs
-```
-
-## Examples
-
-**Typical homelab with UniFi AP and managed switch:**
-
-```
-Scenario: 3-bedroom house, UniFi Dream Machine + UniFi 8-port switch + 2 APs
-
-VLAN 10 — Trusted    192.168.10.0/24   MacBook, iPhones, iPad
-VLAN 20 — IoT        192.168.20.0/24   Nest thermostat, Philips Hue, Ring doorbell, smart TVs
-VLAN 30 — Servers    192.168.30.0/24   Synology NAS (192.168.30.10), Pi-hole (192.168.30.2)
-VLAN 40 — Guest      192.168.40.0/24   Visitor Wi-Fi — internet only
-
-SSID → VLAN mapping:
-  "Home"      → VLAN 10 (WPA2, strong password, trusted devices only)
-  "IoT"       → VLAN 20 (WPA2, separate password, printed on router for setup)
-  "Guest"     → VLAN 40 (WPA2, simple password you can share freely)
-
-Switch port behavior:
-  Port 1  → trunk to router (tagged VLANs 10,20,30,40,99)
-  Port 2  → trunk to APs (tagged VLANs 10,20,40; AP handles per-SSID tagging)
-  Port 3  → access VLAN 30 (NAS — untagged, no VLAN awareness needed)
-  Port 4  → access VLAN 30 (Pi-hole — untagged)
-  Port 5–8 → access VLAN 10 (wired workstations)
-
-Firewall rules applied (all rules add isolation, none remove existing protections):
-  IoT → Trusted: BLOCK
-  IoT → Servers: BLOCK except 192.168.30.2:53 (Pi-hole DNS allowed)
-  IoT → Internet: ALLOW
-  Guest → Local networks: BLOCK
-  Guest → Internet: ALLOW
-  Trusted → everywhere: ALLOW
-```
-
-## UniFi Configuration
-
-### Create Networks in UniFi Controller
-
-```
-Settings → Networks → Create New Network
-
-For each VLAN:
-  Name: IoT
-  Purpose: Corporate  (gives DHCP + routing)
-  VLAN ID: 20
-  Network: 192.168.20.0/24
-  Gateway IP: 192.168.20.1
-  DHCP: Enable
-  DHCP Range: 192.168.20.100 – 192.168.20.254
-```
-
-### Map SSIDs to VLANs (UniFi)
-
-```
-Settings → WiFi → Create New WiFi
-
-  Name: IoT-Network
-  Password: <separate password>
-  Network: IoT  ← select your VLAN here
-  # All devices connecting to this SSID land in VLAN 20
-
-  Name: Guest
-  Password: <guest password>
-  Network: Guest
-  Guest Policy: Enable  ← isolates guests from each other too
-```
-
-### UniFi Firewall Rules (Traffic Rules)
-
-```
-Settings → Traffic & Security → Traffic Rules
-
-# Block IoT from reaching Trusted VLAN
-  Action: Block
-  Category: Local Network
-  Source: IoT (192.168.20.0/24)
-  Destination: Trusted (192.168.10.0/24)
-
-# Allow IoT to reach internet only
-  Action: Allow
-  Source: IoT
-  Destination: Internet
-
-# Block Guest from all local networks
-  Action: Block
-  Source: Guest
-  Destination: Local Networks
-```
-
-## pfSense / OPNsense Configuration
-
-### Create VLANs
-
-```
-Interfaces → Assignments → VLANs → Add
-
-  Parent Interface: em1  (your LAN NIC)
-  VLAN Tag: 20
-  Description: IoT
-
-# Repeat for each VLAN, then assign each VLAN to an interface:
-Interfaces → Assignments → Add
-  Select the VLAN you created → click Add
-  Enable the interface, set IP to gateway address (192.168.20.1/24)
-```
-
-### DHCP for Each VLAN
-
-```
-Services → DHCP Server → Select your VLAN interface
-
-  Enable DHCP
-  Range: 192.168.20.100 to 192.168.20.254
-  DNS Servers: 192.168.30.2  ← Pi-hole IP if you have one
-```
-
-### Firewall Rules (pfSense/OPNsense)
-
-```
-# Rules are processed top-to-bottom, first match wins.
-
-# On the IoT interface (VLAN 20):
-  Rule 1: Allow IoT → Pi-hole DNS  ← MUST come before the RFC1918 block rule
-    Protocol: UDP/TCP
-    Source: IoT net
-    Destination: 192.168.30.2 port 53
-    Action: Allow
-
-  Rule 2: Block IoT → RFC1918 (all private IP ranges)
-    Protocol: any
-    Source: IoT net
-    Destination: RFC1918  (192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12)
-    Action: Block
-
-  Rule 3: Allow IoT → internet
-    Protocol: any
-    Source: IoT net
-    Destination: any
-    Action: Allow
-
-# On the Trusted interface (VLAN 10):
-  Allow all (trusted devices can reach everything)
-    Source: Trusted net
-    Destination: any
-    Action: Allow
-
-# Additional exceptions for IoT devices that need specific local services:
-  Insert before Rule 2 (the RFC1918 block):
-    Protocol: TCP
-    Source: IoT net
-    Destination: 192.168.30.x port 8123  ← Home Assistant
-    Action: Allow
-```
-
-## MikroTik Configuration
-
-```
-# Step 1: Create a bridge with VLAN filtering enabled
-/interface bridge
-add name=bridge vlan-filtering=yes
-
-# Step 2: Add physical ports to the bridge
-# Trunk port to router/uplink (tagged for all VLANs)
-/interface bridge port
-add bridge=bridge interface=ether1 frame-types=admit-only-vlan-tagged
-
-# Access port for trusted devices (untagged VLAN 10)
-/interface bridge port
-add bridge=bridge interface=ether2 pvid=10 frame-types=admit-only-untagged-and-priority-tagged
-
-# Access port for IoT devices (untagged VLAN 20)
-/interface bridge port
-add bridge=bridge interface=ether3 pvid=20 frame-types=admit-only-untagged-and-priority-tagged
-
-# Step 3: Define which VLANs are allowed on which ports
-/interface bridge vlan
-add bridge=bridge tagged=ether1 untagged=ether2 vlan-ids=10
-add bridge=bridge tagged=ether1 untagged=ether3 vlan-ids=20
-
-# Step 4: Create VLAN interfaces on the bridge (gateway IPs)
-/interface vlan
-add interface=bridge name=vlan10 vlan-id=10
-add interface=bridge name=vlan20 vlan-id=20
-
-# Step 5: Assign gateway IPs
-/ip address
-add interface=vlan10 address=192.168.10.1/24
-add interface=vlan20 address=192.168.20.1/24
-
-# Step 6: DHCP pools and servers
-/ip pool
-add name=pool-trusted ranges=192.168.10.100-192.168.10.254
-add name=pool-iot ranges=192.168.20.100-192.168.20.254
-
-/ip dhcp-server
-add interface=vlan10 address-pool=pool-trusted name=dhcp-trusted
-add interface=vlan20 address-pool=pool-iot name=dhcp-iot
-
-/ip dhcp-server network
-add address=192.168.10.0/24 gateway=192.168.10.1
-add address=192.168.20.0/24 gateway=192.168.20.1
-
-# Step 7: Firewall — block IoT from reaching trusted VLAN
-/ip firewall filter
-add chain=forward src-address=192.168.20.0/24 dst-address=192.168.10.0/24 \
-    action=drop comment="Block IoT to Trusted"
-```
-
-## Switch Trunk vs Access Ports
-
-```
-# Trunk port: carries multiple VLANs (tagged) — connects switch-to-switch, switch-to-router, switch-to-AP
-# Access port: carries one VLAN (untagged) — connects to end devices (PC, camera, NAS)
-
-# A managed switch port connected to your router should be a trunk:
-  Allowed VLANs: 10, 20, 30, 40, 99
-
-# A port connecting to a PC should be an access port:
-  VLAN: 10 (trusted)
-  No tagging — the PC does not know or care about VLANs
-
-# A port connecting to an AP must be a trunk:
-  The AP tags traffic from each SSID with the right VLAN ID
-  Allowed VLANs: 10, 20, 40  (whichever SSIDs the AP serves)
-```
-
-## Anti-Patterns
-
-```
-# BAD: Creating VLANs without adding firewall rules
-# VLANs without firewall rules do not provide security — inter-VLAN routing is open by default
-# GOOD: Add explicit block rules immediately after creating VLANs
-
-# BAD: Putting the Pi-hole in the IoT VLAN
-# IoT devices can reach it but trusted devices cannot (without extra rules)
-# GOOD: Pi-hole in the Servers VLAN with a rule allowing all VLANs to reach port 53
-
-# BAD: Native VLAN equals management VLAN
-# Untagged traffic landing in your management VLAN enables VLAN hopping attacks
-# GOOD: Use a dedicated unused VLAN as native (e.g. VLAN 999), keep management traffic tagged
-
-# BAD: Same Wi-Fi password for IoT SSID and trusted SSID
-# Anyone who learns the password can connect IoT devices to the wrong segment
-```
-
-## Best Practices
-
-- Start with 4 VLANs: Trusted, IoT, Servers, Guest — add more as needed
-- Put Pi-hole in the Servers VLAN (192.168.30.x)
-- Add a firewall rule allowing DNS (port 53) from all VLANs to the Pi-hole IP — before any RFC1918 block rule
-- Test isolation after every rule change: from the IoT VLAN, try to ping a trusted device — it should fail
-- Use a management VLAN for switch and AP web UIs and restrict access to the Trusted VLAN only
-- Document your VLAN design in a table (VLAN ID, name, subnet, purpose)
-
-## Related Skills
-
-- homelab-network-setup
-- homelab-pihole-dns
-- homelab-wireguard-vpn
+---
+name: homelab-vlan-segmentation
+description: Segmenting home networks into VLANs for IoT, guest, trusted, and server traffic using UniFi, pfSense/OPNsense, and MikroTik — including switch trunk config, firewall rules, and wireless SSID mapping.
+origin: community
+---
+
+# Homelab VLAN Segmentation
+
+How to split a home network into isolated VLANs so IoT devices, guests, and your main
+PCs cannot talk to each other. The most impactful security upgrade for a home network.
+
+All firewall rules shown here add isolation between segments — they do not remove
+existing protections. Apply changes in a maintenance window and verify connectivity
+between segments after each step before moving on.
+
+## When to Use
+
+- Setting up VLANs on a home network for the first time
+- Isolating IoT devices (smart bulbs, cameras, TVs) from trusted devices
+- Creating a guest Wi-Fi network that cannot reach home devices
+- Explaining how VLANs work to someone unfamiliar with the concept
+- Configuring trunk ports, access ports, and SSID-to-VLAN mapping
+- Troubleshooting inter-VLAN routing or firewall rule issues on pfSense/OPNsense/UniFi
+
+## How It Works
+
+```
+Without VLANs — flat network:
+  All devices on 192.168.1.0/24
+  Smart TV (potential malware) → can reach your NAS, PCs, everything
+
+With VLANs:
+  VLAN 10 — Trusted    192.168.10.0/24  (PCs, phones, laptops)
+  VLAN 20 — IoT        192.168.20.0/24  (smart TV, bulbs, cameras)
+  VLAN 30 — Servers    192.168.30.0/24  (NAS, Pi, VMs)
+  VLAN 40 — Guest      192.168.40.0/24  (visitor Wi-Fi)
+  VLAN 99 — Management 192.168.99.0/24  (switch/AP web UIs)
+
+  Smart TV → blocked from reaching 192.168.10.0/24 and 192.168.30.0/24
+  Guests → internet only, cannot see any home devices
+```
+
+## VLAN Design Template
+
+```
+VLAN  Name        Subnet              Gateway         Purpose
+10    trusted     192.168.10.0/24     192.168.10.1    PCs, phones, laptops
+20    iot         192.168.20.0/24     192.168.20.1    Smart home devices
+30    servers     192.168.30.0/24     192.168.30.1    NAS, Pi, self-hosted
+40    guest       192.168.40.0/24     192.168.40.1    Visitor Wi-Fi
+99    management  192.168.99.0/24     192.168.99.1    Network gear web UIs
+```
+
+## Examples
+
+**Typical homelab with UniFi AP and managed switch:**
+
+```
+Scenario: 3-bedroom house, UniFi Dream Machine + UniFi 8-port switch + 2 APs
+
+VLAN 10 — Trusted    192.168.10.0/24   MacBook, iPhones, iPad
+VLAN 20 — IoT        192.168.20.0/24   Nest thermostat, Philips Hue, Ring doorbell, smart TVs
+VLAN 30 — Servers    192.168.30.0/24   Synology NAS (192.168.30.10), Pi-hole (192.168.30.2)
+VLAN 40 — Guest      192.168.40.0/24   Visitor Wi-Fi — internet only
+
+SSID → VLAN mapping:
+  "Home"      → VLAN 10 (WPA2, strong password, trusted devices only)
+  "IoT"       → VLAN 20 (WPA2, separate password, printed on router for setup)
+  "Guest"     → VLAN 40 (WPA2, simple password you can share freely)
+
+Switch port behavior:
+  Port 1  → trunk to router (tagged VLANs 10,20,30,40,99)
+  Port 2  → trunk to APs (tagged VLANs 10,20,40; AP handles per-SSID tagging)
+  Port 3  → access VLAN 30 (NAS — untagged, no VLAN awareness needed)
+  Port 4  → access VLAN 30 (Pi-hole — untagged)
+  Port 5–8 → access VLAN 10 (wired workstations)
+
+Firewall rules applied (all rules add isolation, none remove existing protections):
+  IoT → Trusted: BLOCK
+  IoT → Servers: BLOCK except 192.168.30.2:53 (Pi-hole DNS allowed)
+  IoT → Internet: ALLOW
+  Guest → Local networks: BLOCK
+  Guest → Internet: ALLOW
+  Trusted → everywhere: ALLOW
+```
+
+## UniFi Configuration
+
+### Create Networks in UniFi Controller
+
+```
+Settings → Networks → Create New Network
+
+For each VLAN:
+  Name: IoT
+  Purpose: Corporate  (gives DHCP + routing)
+  VLAN ID: 20
+  Network: 192.168.20.0/24
+  Gateway IP: 192.168.20.1
+  DHCP: Enable
+  DHCP Range: 192.168.20.100 – 192.168.20.254
+```
+
+### Map SSIDs to VLANs (UniFi)
+
+```
+Settings → WiFi → Create New WiFi
+
+  Name: IoT-Network
+  Password: <separate password>
+  Network: IoT  ← select your VLAN here
+  # All devices connecting to this SSID land in VLAN 20
+
+  Name: Guest
+  Password: <guest password>
+  Network: Guest
+  Guest Policy: Enable  ← isolates guests from each other too
+```
+
+### UniFi Firewall Rules (Traffic Rules)
+
+```
+Settings → Traffic & Security → Traffic Rules
+
+# Block IoT from reaching Trusted VLAN
+  Action: Block
+  Category: Local Network
+  Source: IoT (192.168.20.0/24)
+  Destination: Trusted (192.168.10.0/24)
+
+# Allow IoT to reach internet only
+  Action: Allow
+  Source: IoT
+  Destination: Internet
+
+# Block Guest from all local networks
+  Action: Block
+  Source: Guest
+  Destination: Local Networks
+```
+
+## pfSense / OPNsense Configuration
+
+### Create VLANs
+
+```
+Interfaces → Assignments → VLANs → Add
+
+  Parent Interface: em1  (your LAN NIC)
+  VLAN Tag: 20
+  Description: IoT
+
+# Repeat for each VLAN, then assign each VLAN to an interface:
+Interfaces → Assignments → Add
+  Select the VLAN you created → click Add
+  Enable the interface, set IP to gateway address (192.168.20.1/24)
+```
+
+### DHCP for Each VLAN
+
+```
+Services → DHCP Server → Select your VLAN interface
+
+  Enable DHCP
+  Range: 192.168.20.100 to 192.168.20.254
+  DNS Servers: 192.168.30.2  ← Pi-hole IP if you have one
+```
+
+### Firewall Rules (pfSense/OPNsense)
+
+```
+# Rules are processed top-to-bottom, first match wins.
+
+# On the IoT interface (VLAN 20):
+  Rule 1: Allow IoT → Pi-hole DNS  ← MUST come before the RFC1918 block rule
+    Protocol: UDP/TCP
+    Source: IoT net
+    Destination: 192.168.30.2 port 53
+    Action: Allow
+
+  Rule 2: Block IoT → RFC1918 (all private IP ranges)
+    Protocol: any
+    Source: IoT net
+    Destination: RFC1918  (192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12)
+    Action: Block
+
+  Rule 3: Allow IoT → internet
+    Protocol: any
+    Source: IoT net
+    Destination: any
+    Action: Allow
+
+# On the Trusted interface (VLAN 10):
+  Allow all (trusted devices can reach everything)
+    Source: Trusted net
+    Destination: any
+    Action: Allow
+
+# Additional exceptions for IoT devices that need specific local services:
+  Insert before Rule 2 (the RFC1918 block):
+    Protocol: TCP
+    Source: IoT net
+    Destination: 192.168.30.x port 8123  ← Home Assistant
+    Action: Allow
+```
+
+## MikroTik Configuration
+
+```
+# Step 1: Create a bridge with VLAN filtering enabled
+/interface bridge
+add name=bridge vlan-filtering=yes
+
+# Step 2: Add physical ports to the bridge
+# Trunk port to router/uplink (tagged for all VLANs)
+/interface bridge port
+add bridge=bridge interface=ether1 frame-types=admit-only-vlan-tagged
+
+# Access port for trusted devices (untagged VLAN 10)
+/interface bridge port
+add bridge=bridge interface=ether2 pvid=10 frame-types=admit-only-untagged-and-priority-tagged
+
+# Access port for IoT devices (untagged VLAN 20)
+/interface bridge port
+add bridge=bridge interface=ether3 pvid=20 frame-types=admit-only-untagged-and-priority-tagged
+
+# Step 3: Define which VLANs are allowed on which ports
+/interface bridge vlan
+add bridge=bridge tagged=ether1 untagged=ether2 vlan-ids=10
+add bridge=bridge tagged=ether1 untagged=ether3 vlan-ids=20
+
+# Step 4: Create VLAN interfaces on the bridge (gateway IPs)
+/interface vlan
+add interface=bridge name=vlan10 vlan-id=10
+add interface=bridge name=vlan20 vlan-id=20
+
+# Step 5: Assign gateway IPs
+/ip address
+add interface=vlan10 address=192.168.10.1/24
+add interface=vlan20 address=192.168.20.1/24
+
+# Step 6: DHCP pools and servers
+/ip pool
+add name=pool-trusted ranges=192.168.10.100-192.168.10.254
+add name=pool-iot ranges=192.168.20.100-192.168.20.254
+
+/ip dhcp-server
+add interface=vlan10 address-pool=pool-trusted name=dhcp-trusted
+add interface=vlan20 address-pool=pool-iot name=dhcp-iot
+
+/ip dhcp-server network
+add address=192.168.10.0/24 gateway=192.168.10.1
+add address=192.168.20.0/24 gateway=192.168.20.1
+
+# Step 7: Firewall — block IoT from reaching trusted VLAN
+/ip firewall filter
+add chain=forward src-address=192.168.20.0/24 dst-address=192.168.10.0/24 \
+    action=drop comment="Block IoT to Trusted"
+```
+
+## Switch Trunk vs Access Ports
+
+```
+# Trunk port: carries multiple VLANs (tagged) — connects switch-to-switch, switch-to-router, switch-to-AP
+# Access port: carries one VLAN (untagged) — connects to end devices (PC, camera, NAS)
+
+# A managed switch port connected to your router should be a trunk:
+  Allowed VLANs: 10, 20, 30, 40, 99
+
+# A port connecting to a PC should be an access port:
+  VLAN: 10 (trusted)
+  No tagging — the PC does not know or care about VLANs
+
+# A port connecting to an AP must be a trunk:
+  The AP tags traffic from each SSID with the right VLAN ID
+  Allowed VLANs: 10, 20, 40  (whichever SSIDs the AP serves)
+```
+
+## Anti-Patterns
+
+```
+# BAD: Creating VLANs without adding firewall rules
+# VLANs without firewall rules do not provide security — inter-VLAN routing is open by default
+# GOOD: Add explicit block rules immediately after creating VLANs
+
+# BAD: Putting the Pi-hole in the IoT VLAN
+# IoT devices can reach it but trusted devices cannot (without extra rules)
+# GOOD: Pi-hole in the Servers VLAN with a rule allowing all VLANs to reach port 53
+
+# BAD: Native VLAN equals management VLAN
+# Untagged traffic landing in your management VLAN enables VLAN hopping attacks
+# GOOD: Use a dedicated unused VLAN as native (e.g. VLAN 999), keep management traffic tagged
+
+# BAD: Same Wi-Fi password for IoT SSID and trusted SSID
+# Anyone who learns the password can connect IoT devices to the wrong segment
+```
+
+## Best Practices
+
+- Start with 4 VLANs: Trusted, IoT, Servers, Guest — add more as needed
+- Put Pi-hole in the Servers VLAN (192.168.30.x)
+- Add a firewall rule allowing DNS (port 53) from all VLANs to the Pi-hole IP — before any RFC1918 block rule
+- Test isolation after every rule change: from the IoT VLAN, try to ping a trusted device — it should fail
+- Use a management VLAN for switch and AP web UIs and restrict access to the Trusted VLAN only
+- Document your VLAN design in a table (VLAN ID, name, subnet, purpose)
+
+## Related Skills
+
+- homelab-network-setup
+- homelab-pihole-dns
+- homelab-wireguard-vpn