@faicad/faijs 0.31.1 → 0.32.3

package/dist/vendored/brepjs/topology/curveBuilders.js

@@ -1,125 +0,0 @@
-/**
- * Curve construction helpers — lines, arcs, circles, ellipses, splines, and wire assembly.
- */
-import { getKernel } from '../kernel/index.js';
-import { ok, err } from '../core/result.js';
-import { validationError, kernelError } from '../core/errors.js';
-import { createEdge, createWire } from '../core/shapeTypes.js';
-/** Create a straight edge between two 3D points. */
-export function makeLine(v1, v2) {
-    return createEdge(getKernel().makeLineEdge([...v1], [...v2]));
-}
-/** Create a circular edge with the given radius, center, and normal. */
-export function makeCircle(radius, center = [0, 0, 0], normal = [0, 0, 1]) {
-    return createEdge(getKernel().makeCircleEdge([...center], [...normal], radius));
-}
-/**
- * Create an elliptical edge with the given radii.
- *
- * @param xDir - Optional direction for the major axis.
- * @returns An error if `minorRadius` exceeds `majorRadius`.
- */
-export function makeEllipse(majorRadius, minorRadius, center = [0, 0, 0], normal = [0, 0, 1], xDir) {
-    if (minorRadius > majorRadius) {
-        return err(validationError('ELLIPSE_RADII', 'The minor radius must be smaller than the major one'));
-    }
-    return ok(createEdge(getKernel().makeEllipseEdge([...center], [...normal], majorRadius, minorRadius, xDir ? [...xDir] : undefined)));
-}
-/**
- * Create a helical wire with the given pitch, height, and radius.
- *
- * @param pitch - Vertical distance per full turn.
- * @param lefthand - Wind the helix in the left-hand direction.
- */
-export function makeHelix(pitch, height, radius, center = [0, 0, 0], dir = [0, 0, 1], lefthand = false) {
-    return createWire(getKernel().makeHelixWire(pitch, height, radius, [...center], [...dir], lefthand));
-}
-/**
- * Create a circular arc edge passing through three points.
- *
- * @param v1 - Start point.
- * @param v2 - Mid point (on the arc).
- * @param v3 - End point.
- */
-export function makeThreePointArc(v1, v2, v3) {
-    return createEdge(getKernel().makeArcEdge([...v1], [...v2], [...v3]));
-}
-/**
- * Create an elliptical arc edge between two angles.
- *
- * @param startAngle - Start angle in radians.
- * @param endAngle - End angle in radians.
- * @param xDir - Optional direction for the major axis.
- * @returns An error if `minorRadius` exceeds `majorRadius`.
- */
-export function makeEllipseArc(majorRadius, minorRadius, startAngle, endAngle, center = [0, 0, 0], normal = [0, 0, 1], xDir) {
-    if (minorRadius > majorRadius) {
-        return err(validationError('ELLIPSE_RADII', 'The minor radius must be smaller than the major one'));
-    }
-    return ok(createEdge(getKernel().makeEllipseArc([...center], [...normal], majorRadius, minorRadius, startAngle, endAngle, xDir ? [...xDir] : undefined)));
-}
-/**
- * Create a B-spline edge that approximates a set of 3D points.
- *
- * @returns An error if the kernel approximation algorithm fails.
- */
-export function makeBSplineApproximation(points, { tolerance = 1e-3, smoothing = null, degMax = 6, degMin = 1 } = {}) {
-    try {
-        const mutablePoints = points.map((p) => [...p]);
-        return ok(createEdge(getKernel().approximatePoints(mutablePoints, { tolerance, degMin, degMax, smoothing })));
-    }
-    catch (e) {
-        return err(kernelError('BSPLINE_FAILED', 'B-spline approximation failed', e));
-    }
-}
-/**
- * Create a B-spline edge that passes exactly through every input point. Use
- * over {@link makeBSplineApproximation} when downstream wire assembly needs
- * precise endpoint coincidence with neighbouring edges.
- */
-export function makeBSplineInterpolation(points, { periodic = false, tolerance = 1e-7 } = {}) {
-    try {
-        const mutablePoints = points.map((p) => [...p]);
-        return ok(createEdge(getKernel().interpolatePoints(mutablePoints, { periodic, tolerance })));
-    }
-    catch (e) {
-        return err(kernelError('BSPLINE_INTERP_FAILED', 'B-spline interpolation failed', e));
-    }
-}
-/**
- * Create a Bezier curve edge from control points.
- *
- * @param points - Two or more control points defining the curve.
- * @returns Ok with the edge, or Err if fewer than 2 points are provided.
- */
-export function makeBezierCurve(points) {
-    if (points.length < 2) {
-        return err(validationError('BEZIER_MIN_POINTS', `Need at least 2 points for a Bezier curve, got ${points.length}`, undefined, {
-            pointCount: points.length,
-        }));
-    }
-    const mutablePoints = points.map((p) => [...p]);
-    return ok(createEdge(getKernel().makeBezierEdge(mutablePoints)));
-}
-/**
- * Create a circular arc edge tangent to a direction at the start point.
- *
- * @param startTgt - Tangent direction at the start point.
- */
-export function makeTangentArc(startPoint, startTgt, endPoint) {
-    return createEdge(getKernel().makeTangentArc([...startPoint], [...startTgt], [...endPoint]));
-}
-/**
- * Assemble edges and/or wires into a single connected wire.
- *
- * @returns An error if the edges cannot form a valid wire (e.g. disconnected).
- */
-export function assembleWire(listOfEdges) {
-    try {
-        return ok(createWire(getKernel().makeWireFromMixed(listOfEdges.map((e) => e.wrapped))));
-    }
-    catch (e) {
-        return err(kernelError('WIRE_BUILD_FAILED', `Failed to build the wire: ${e instanceof Error ? e.message : 'unknown error'}`));
-    }
-}
-//# sourceMappingURL=curveBuilders.js.map

package/dist/vendored/brepjs/topology/curveBuilders.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"curveBuilders.js","sourceRoot":"","sources":["../../../../src/vendored/brepjs/topology/curveBuilders.ts"],"names":[],"mappings":"AAAA;;GAEG;AAEH,OAAO,EAAE,SAAS,EAAE,MAAM,oBAAoB,CAAC;AAE/C,OAAO,EAAe,EAAE,EAAE,GAAG,EAAE,MAAM,mBAAmB,CAAC;AACzD,OAAO,EAAE,eAAe,EAAE,WAAW,EAAE,MAAM,mBAAmB,CAAC;AAEjE,OAAO,EAAE,UAAU,EAAE,UAAU,EAAE,MAAM,uBAAuB,CAAC;AAE/D,oDAAoD;AACpD,MAAM,UAAU,QAAQ,CAAC,EAAQ,EAAE,EAAQ;IACzC,OAAO,UAAU,CAAC,SAAS,EAAE,CAAC,YAAY,CAAC,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,CAAC;AAChE,CAAC;AAED,wEAAwE;AACxE,MAAM,UAAU,UAAU,CACxB,MAAc,EACd,SAAe,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,EACxB,SAAe,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC;IAExB,OAAO,UAAU,CAAC,SAAS,EAAE,CAAC,cAAc,CAAC,CAAC,GAAG,MAAM,CAAC,EAAE,CAAC,GAAG,MAAM,CAAC,EAAE,MAAM,CAAC,CAAC,CAAC;AAClF,CAAC;AAED;;;;;GAKG;AACH,MAAM,UAAU,WAAW,CACzB,WAAmB,EACnB,WAAmB,EACnB,SAAe,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,EACxB,SAAe,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,EACxB,IAAW;IAEX,IAAI,WAAW,GAAG,WAAW,EAAE,CAAC;QAC9B,OAAO,GAAG,CACR,eAAe,CAAC,eAAe,EAAE,qDAAqD,CAAC,CACxF,CAAC;IACJ,CAAC;IAED,OAAO,EAAE,CACP,UAAU,CACR,SAAS,EAAE,CAAC,eAAe,CACzB,CAAC,GAAG,MAAM,CAAC,EACX,CAAC,GAAG,MAAM,CAAC,EACX,WAAW,EACX,WAAW,EACX,IAAI,CAAC,CAAC,CAAC,CAAC,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC,SAAS,CAC7B,CACF,CACF,CAAC;AACJ,CAAC;AAED;;;;;GAKG;AACH,MAAM,UAAU,SAAS,CACvB,KAAa,EACb,MAAc,EACd,MAAc,EACd,SAAe,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,EACxB,MAAY,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,EACrB,QAAQ,GAAG,KAAK;IAEhB,OAAO,UAAU,CACf,SAAS,EAAE,CAAC,aAAa,CAAC,KAAK,EAAE,MAAM,EAAE,MAAM,EAAE,CAAC,GAAG,MAAM,CAAC,EAAE,CAAC,GAAG,GAAG,CAAC,EAAE,QAAQ,CAAC,CAClF,CAAC;AACJ,CAAC;AAED;;;;;;GAMG;AACH,MAAM,UAAU,iBAAiB,CAAC,EAAQ,EAAE,EAAQ,EAAE,EAAQ;IAC5D,OAAO,UAAU,CAAC,SAAS,EAAE,CAAC,WAAW,CAAC,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,CAAC;AACxE,CAAC;AAED;;;;;;;GAOG;AACH,MAAM,UAAU,cAAc,CAC5B,WAAmB,EACnB,WAAmB,EACnB,UAAkB,EAClB,QAAgB,EAChB,SAAe,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,EACxB,SAAe,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,EACxB,IAAW;IAEX,IAAI,WAAW,GAAG,WAAW,EAAE,CAAC;QAC9B,OAAO,GAAG,CACR,eAAe,CAAC,eAAe,EAAE,qDAAqD,CAAC,CACxF,CAAC;IACJ,CAAC;IAED,OAAO,EAAE,CACP,UAAU,CACR,SAAS,EAAE,CAAC,cAAc,CACxB,CAAC,GAAG,MAAM,CAAC,EACX,CAAC,GAAG,MAAM,CAAC,EACX,WAAW,EACX,WAAW,EACX,UAAU,EACV,QAAQ,EACR,IAAI,CAAC,CAAC,CAAC,CAAC,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC,SAAS,CAC7B,CACF,CACF,CAAC;AACJ,CAAC;AAcD;;;;GAIG;AACH,MAAM,UAAU,wBAAwB,CACtC,MAAc,EACd,EAAE,SAAS,GAAG,IAAI,EAAE,SAAS,GAAG,IAAI,EAAE,MAAM,GAAG,CAAC,EAAE,MAAM,GAAG,CAAC,KAAkC,EAAE;IAEhG,IAAI,CAAC;QACH,MAAM,aAAa,GAA+B,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC;QAC5E,OAAO,EAAE,CACP,UAAU,CACR,SAAS,EAAE,CAAC,iBAAiB,CAAC,aAAa,EAAE,EAAE,SAAS,EAAE,MAAM,EAAE,MAAM,EAAE,SAAS,EAAE,CAAC,CACvF,CACF,CAAC;IACJ,CAAC;IAAC,OAAO,CAAC,EAAE,CAAC;QACX,OAAO,GAAG,CAAC,WAAW,CAAC,gBAAgB,EAAE,+BAA+B,EAAE,CAAC,CAAC,CAAC,CAAC;IAChF,CAAC;AACH,CAAC;AASD;;;;GAIG;AACH,MAAM,UAAU,wBAAwB,CACtC,MAAc,EACd,EAAE,QAAQ,GAAG,KAAK,EAAE,SAAS,GAAG,IAAI,KAAkC,EAAE;IAExE,IAAI,CAAC;QACH,MAAM,aAAa,GAA+B,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC;QAC5E,OAAO,EAAE,CAAC,UAAU,CAAC,SAAS,EAAE,CAAC,iBAAiB,CAAC,aAAa,EAAE,EAAE,QAAQ,EAAE,SAAS,EAAE,CAAC,CAAC,CAAC,CAAC;IAC/F,CAAC;IAAC,OAAO,CAAC,EAAE,CAAC;QACX,OAAO,GAAG,CAAC,WAAW,CAAC,uBAAuB,EAAE,+BAA+B,EAAE,CAAC,CAAC,CAAC,CAAC;IACvF,CAAC;AACH,CAAC;AAED;;;;;GAKG;AACH,MAAM,UAAU,eAAe,CAAC,MAAc;IAC5C,IAAI,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QACtB,OAAO,GAAG,CACR,eAAe,CACb,mBAAmB,EACnB,kDAAkD,MAAM,CAAC,MAAM,EAAE,EACjE,SAAS,EACT;YACE,UAAU,EAAE,MAAM,CAAC,MAAM;SAC1B,CACF,CACF,CAAC;IACJ,CAAC;IACD,MAAM,aAAa,GAA+B,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC;IAC5E,OAAO,EAAE,CAAC,UAAU,CAAC,SAAS,EAAE,CAAC,cAAc,CAAC,aAAa,CAAC,CAAC,CAAC,CAAC;AACnE,CAAC;AAED;;;;GAIG;AACH,MAAM,UAAU,cAAc,CAAC,UAAgB,EAAE,QAAc,EAAE,QAAc;IAC7E,OAAO,UAAU,CAAC,SAAS,EAAE,CAAC,cAAc,CAAC,CAAC,GAAG,UAAU,CAAC,EAAE,CAAC,GAAG,QAAQ,CAAC,EAAE,CAAC,GAAG,QAAQ,CAAC,CAAC,CAAC,CAAC;AAC/F,CAAC;AAED;;;;GAIG;AACH,MAAM,UAAU,YAAY,CAAC,WAA4B;IACvD,IAAI,CAAC;QACH,OAAO,EAAE,CAAC,UAAU,CAAC,SAAS,EAAE,CAAC,iBAAiB,CAAC,WAAW,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,CAAC;IAC1F,CAAC;IAAC,OAAO,CAAC,EAAE,CAAC;QACX,OAAO,GAAG,CACR,WAAW,CACT,mBAAmB,EACnB,6BAA6B,CAAC,YAAY,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,eAAe,EAAE,CAChF,CACF,CAAC;IACJ,CAAC;AACH,CAAC","sourcesContent":["/**\n * Curve construction helpers — lines, arcs, circles, ellipses, splines, and wire assembly.\n */\n\nimport { getKernel } from '../kernel/index.js';\nimport type { Vec3 } from '../core/types.js';\nimport { type Result, ok, err } from '../core/result.js';\nimport { validationError, kernelError } from '../core/errors.js';\nimport type { Edge, Wire } from '../core/shapeTypes.js';\nimport { createEdge, createWire } from '../core/shapeTypes.js';\n\n/** Create a straight edge between two 3D points. */\nexport function makeLine(v1: Vec3, v2: Vec3): Edge {\n  return createEdge(getKernel().makeLineEdge([...v1], [...v2]));\n}\n\n/** Create a circular edge with the given radius, center, and normal. */\nexport function makeCircle(\n  radius: number,\n  center: Vec3 = [0, 0, 0],\n  normal: Vec3 = [0, 0, 1]\n): Edge {\n  return createEdge(getKernel().makeCircleEdge([...center], [...normal], radius));\n}\n\n/**\n * Create an elliptical edge with the given radii.\n *\n * @param xDir - Optional direction for the major axis.\n * @returns An error if `minorRadius` exceeds `majorRadius`.\n */\nexport function makeEllipse(\n  majorRadius: number,\n  minorRadius: number,\n  center: Vec3 = [0, 0, 0],\n  normal: Vec3 = [0, 0, 1],\n  xDir?: Vec3\n): Result<Edge> {\n  if (minorRadius > majorRadius) {\n    return err(\n      validationError('ELLIPSE_RADII', 'The minor radius must be smaller than the major one')\n    );\n  }\n\n  return ok(\n    createEdge(\n      getKernel().makeEllipseEdge(\n        [...center],\n        [...normal],\n        majorRadius,\n        minorRadius,\n        xDir ? [...xDir] : undefined\n      )\n    )\n  );\n}\n\n/**\n * Create a helical wire with the given pitch, height, and radius.\n *\n * @param pitch - Vertical distance per full turn.\n * @param lefthand - Wind the helix in the left-hand direction.\n */\nexport function makeHelix(\n  pitch: number,\n  height: number,\n  radius: number,\n  center: Vec3 = [0, 0, 0],\n  dir: Vec3 = [0, 0, 1],\n  lefthand = false\n): Wire {\n  return createWire(\n    getKernel().makeHelixWire(pitch, height, radius, [...center], [...dir], lefthand)\n  );\n}\n\n/**\n * Create a circular arc edge passing through three points.\n *\n * @param v1 - Start point.\n * @param v2 - Mid point (on the arc).\n * @param v3 - End point.\n */\nexport function makeThreePointArc(v1: Vec3, v2: Vec3, v3: Vec3): Edge {\n  return createEdge(getKernel().makeArcEdge([...v1], [...v2], [...v3]));\n}\n\n/**\n * Create an elliptical arc edge between two angles.\n *\n * @param startAngle - Start angle in radians.\n * @param endAngle - End angle in radians.\n * @param xDir - Optional direction for the major axis.\n * @returns An error if `minorRadius` exceeds `majorRadius`.\n */\nexport function makeEllipseArc(\n  majorRadius: number,\n  minorRadius: number,\n  startAngle: number,\n  endAngle: number,\n  center: Vec3 = [0, 0, 0],\n  normal: Vec3 = [0, 0, 1],\n  xDir?: Vec3\n): Result<Edge> {\n  if (minorRadius > majorRadius) {\n    return err(\n      validationError('ELLIPSE_RADII', 'The minor radius must be smaller than the major one')\n    );\n  }\n\n  return ok(\n    createEdge(\n      getKernel().makeEllipseArc(\n        [...center],\n        [...normal],\n        majorRadius,\n        minorRadius,\n        startAngle,\n        endAngle,\n        xDir ? [...xDir] : undefined\n      )\n    )\n  );\n}\n\n/** Configuration for {@link makeBSplineApproximation}. */\nexport interface BSplineApproximationOptions {\n  /** Maximum allowed distance between the curve and the input points. */\n  tolerance?: number;\n  /** Maximum B-spline degree. */\n  degMax?: number;\n  /** Minimum B-spline degree. */\n  degMin?: number;\n  /** Optional `[weight1, weight2, weight3]` smoothing weights, or `null` to disable. */\n  smoothing?: null | [number, number, number];\n}\n\n/**\n * Create a B-spline edge that approximates a set of 3D points.\n *\n * @returns An error if the kernel approximation algorithm fails.\n */\nexport function makeBSplineApproximation(\n  points: Vec3[],\n  { tolerance = 1e-3, smoothing = null, degMax = 6, degMin = 1 }: BSplineApproximationOptions = {}\n): Result<Edge> {\n  try {\n    const mutablePoints: [number, number, number][] = points.map((p) => [...p]);\n    return ok(\n      createEdge(\n        getKernel().approximatePoints(mutablePoints, { tolerance, degMin, degMax, smoothing })\n      )\n    );\n  } catch (e) {\n    return err(kernelError('BSPLINE_FAILED', 'B-spline approximation failed', e));\n  }\n}\n\nexport interface BSplineInterpolationOptions {\n  /** Treat the curve as periodic (closed loop). */\n  periodic?: boolean;\n  /** Vertex-coincidence tolerance. */\n  tolerance?: number;\n}\n\n/**\n * Create a B-spline edge that passes exactly through every input point. Use\n * over {@link makeBSplineApproximation} when downstream wire assembly needs\n * precise endpoint coincidence with neighbouring edges.\n */\nexport function makeBSplineInterpolation(\n  points: Vec3[],\n  { periodic = false, tolerance = 1e-7 }: BSplineInterpolationOptions = {}\n): Result<Edge> {\n  try {\n    const mutablePoints: [number, number, number][] = points.map((p) => [...p]);\n    return ok(createEdge(getKernel().interpolatePoints(mutablePoints, { periodic, tolerance })));\n  } catch (e) {\n    return err(kernelError('BSPLINE_INTERP_FAILED', 'B-spline interpolation failed', e));\n  }\n}\n\n/**\n * Create a Bezier curve edge from control points.\n *\n * @param points - Two or more control points defining the curve.\n * @returns Ok with the edge, or Err if fewer than 2 points are provided.\n */\nexport function makeBezierCurve(points: Vec3[]): Result<Edge> {\n  if (points.length < 2) {\n    return err(\n      validationError(\n        'BEZIER_MIN_POINTS',\n        `Need at least 2 points for a Bezier curve, got ${points.length}`,\n        undefined,\n        {\n          pointCount: points.length,\n        }\n      )\n    );\n  }\n  const mutablePoints: [number, number, number][] = points.map((p) => [...p]);\n  return ok(createEdge(getKernel().makeBezierEdge(mutablePoints)));\n}\n\n/**\n * Create a circular arc edge tangent to a direction at the start point.\n *\n * @param startTgt - Tangent direction at the start point.\n */\nexport function makeTangentArc(startPoint: Vec3, startTgt: Vec3, endPoint: Vec3): Edge {\n  return createEdge(getKernel().makeTangentArc([...startPoint], [...startTgt], [...endPoint]));\n}\n\n/**\n * Assemble edges and/or wires into a single connected wire.\n *\n * @returns An error if the edges cannot form a valid wire (e.g. disconnected).\n */\nexport function assembleWire(listOfEdges: (Edge | Wire)[]): Result<Wire> {\n  try {\n    return ok(createWire(getKernel().makeWireFromMixed(listOfEdges.map((e) => e.wrapped))));\n  } catch (e) {\n    return err(\n      kernelError(\n        'WIRE_BUILD_FAILED',\n        `Failed to build the wire: ${e instanceof Error ? e.message : 'unknown error'}`\n      )\n    );\n  }\n}\n"]}

package/dist/vendored/brepjs/topology/curveFns.d.ts

@@ -1,96 +0,0 @@
-/**
- * Curve and 1D shape functions — functional replacements for _1DShape/Curve methods.
- * All functions accept branded Edge or Wire handles and return plain values.
- */
-import type { Vec3 } from '../core/types.js';
-import type { Dimension, Edge, Wire } from '../core/shapeTypes.js';
-import type { CurveType } from '../core/typeDiscriminants.js';
-import { type Result } from '../core/result.js';
-/**
- * Get the geometric curve type of an edge or wire (LINE, CIRCLE, BSPLINE, etc.).
- */
-export declare function getCurveType(shape: Edge<Dimension> | Wire<Dimension>): CurveType;
-/** Get the start point of a curve. */
-export declare function curveStartPoint(shape: Edge<Dimension> | Wire<Dimension>): Vec3;
-/** Get the end point of a curve. */
-export declare function curveEndPoint(shape: Edge<Dimension> | Wire<Dimension>): Vec3;
-/**
- * Get a point at a normalized parameter position on the curve.
- * @param shape - Edge or wire to evaluate.
- * @param position - Normalized parameter (0 = start, 0.5 = midpoint, 1 = end).
- */
-export declare function curvePointAt(shape: Edge<Dimension> | Wire<Dimension>, position?: number): Vec3;
-/**
- * Get the tangent vector at a normalized parameter position on the curve.
- * @param shape - Edge or wire to evaluate.
- * @param position - Normalized parameter (0 = start, 0.5 = midpoint, 1 = end).
- */
-export declare function curveTangentAt(shape: Edge<Dimension> | Wire<Dimension>, position?: number): Vec3;
-/** Get the arc length of an edge or wire. */
-export declare function curveLength(shape: Edge<Dimension> | Wire<Dimension>): number;
-/**
- * Axis of a circular edge: the circle's center plus the unit normal of its
- * plane. Returns null for non-circular curves.
- *
- * Derived kernel-agnostically from three sampled points (the circumcenter of a
- * triangle determines the unique circle through its vertices), so it works for
- * full circles and arcs alike without an analytic circle accessor.
- */
-export declare function curveAxis(shape: Edge<Dimension> | Wire<Dimension>): {
-    origin: Vec3;
-    direction: Vec3;
-} | null;
-/** Check if the curve is closed. */
-export declare function curveIsClosed(shape: Edge<Dimension> | Wire<Dimension>): boolean;
-/** Check if the curve is periodic. */
-export declare function curveIsPeriodic(shape: Edge<Dimension> | Wire<Dimension>): boolean;
-/** Get the period of a periodic curve. */
-export declare function curvePeriod(shape: Edge<Dimension> | Wire<Dimension>): number;
-/** Get the topological orientation of an edge or wire. */
-export declare function getOrientation(shape: Edge<Dimension> | Wire<Dimension>): 'forward' | 'backward';
-/** Flip the orientation of an edge or wire. Returns a new shape with the same dimension. */
-export declare function flipOrientation<D extends Dimension>(shape: Edge<D> | Wire<D>): Edge<D> | Wire<D>;
-/** Options for BSpline interpolation through points. */
-export interface InterpolateCurveOptions {
-    /** If true, create a periodic (closed) BSpline. */
-    periodic?: boolean;
-    /** Fitting tolerance (default varies by kernel). */
-    tolerance?: number;
-}
-/** Options for BSpline approximation through points. */
-export interface ApproximateCurveOptions {
-    /** Maximum deviation from the input points. */
-    tolerance?: number;
-    /** Minimum BSpline degree. */
-    degMin?: number;
-    /** Maximum BSpline degree. */
-    degMax?: number;
-    /** Smoothing weights `[weight1, weight2, weight3]` or null to disable. */
-    smoothing?: [number, number, number] | null;
-}
-/**
- * Interpolate a smooth BSpline curve that passes exactly through the given points.
- *
- * @param points - At least 2 points defining the curve path.
- * @param options - Interpolation options.
- * @returns An Edge representing the interpolated curve.
- */
-export declare function interpolateCurve(points: Vec3[], options?: InterpolateCurveOptions): Result<Edge>;
-/**
- * Approximate a BSpline curve that passes near the given points.
- *
- * @param points - At least 2 points defining the curve path.
- * @param options - Approximation options.
- * @returns An Edge representing the approximated curve.
- */
-export declare function approximateCurve(points: Vec3[], options?: ApproximateCurveOptions): Result<Edge>;
-/**
- * Offset a wire in 2D. Returns a new wire. Does NOT dispose the input.
- *
- * @param wire - The wire to offset.
- * @param offset - Offset distance (positive = outward, negative = inward).
- * @param kind - Join type for offset corners ('arc', 'intersection', or 'tangent').
- * @returns Ok with the offset wire, or Err if the operation fails.
- */
-export declare function offsetWire2D(wire: Wire<Dimension>, offset: number, kind?: 'arc' | 'intersection' | 'tangent' | 'chamfer'): Result<Wire>;
-//# sourceMappingURL=curveFns.d.ts.map

package/dist/vendored/brepjs/topology/curveFns.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"curveFns.d.ts","sourceRoot":"","sources":["../../../../src/vendored/brepjs/topology/curveFns.ts"],"names":[],"mappings":"AAAA;;;GAGG;AAGH,OAAO,KAAK,EAAE,IAAI,EAAE,MAAM,kBAAkB,CAAC;AAC7C,OAAO,KAAK,EAAE,SAAS,EAAE,IAAI,EAAE,IAAI,EAAE,MAAM,uBAAuB,CAAC;AAEnE,OAAO,KAAK,EAAE,SAAS,EAAE,MAAM,8BAA8B,CAAC;AAC9D,OAAO,EAAE,KAAK,MAAM,EAAW,MAAM,mBAAmB,CAAC;AAQzD;;GAEG;AACH,wBAAgB,YAAY,CAAC,KAAK,EAAE,IAAI,CAAC,SAAS,CAAC,GAAG,IAAI,CAAC,SAAS,CAAC,GAAG,SAAS,CAEhF;AAED,sCAAsC;AACtC,wBAAgB,eAAe,CAAC,KAAK,EAAE,IAAI,CAAC,SAAS,CAAC,GAAG,IAAI,CAAC,SAAS,CAAC,GAAG,IAAI,CAG9E;AAED,oCAAoC;AACpC,wBAAgB,aAAa,CAAC,KAAK,EAAE,IAAI,CAAC,SAAS,CAAC,GAAG,IAAI,CAAC,SAAS,CAAC,GAAG,IAAI,CAG5E;AAED;;;;GAIG;AACH,wBAAgB,YAAY,CAAC,KAAK,EAAE,IAAI,CAAC,SAAS,CAAC,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,QAAQ,SAAM,GAAG,IAAI,CAI3F;AAED;;;;GAIG;AACH,wBAAgB,cAAc,CAAC,KAAK,EAAE,IAAI,CAAC,SAAS,CAAC,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,QAAQ,SAAM,GAAG,IAAI,CAI7F;AAED,6CAA6C;AAC7C,wBAAgB,WAAW,CAAC,KAAK,EAAE,IAAI,CAAC,SAAS,CAAC,GAAG,IAAI,CAAC,SAAS,CAAC,GAAG,MAAM,CAE5E;AAED;;;;;;;GAOG;AACH,wBAAgB,SAAS,CAAC,KAAK,EAAE,IAAI,CAAC,SAAS,CAAC,GAAG,IAAI,CAAC,SAAS,CAAC,GAAG;IACnE,MAAM,EAAE,IAAI,CAAC;IACb,SAAS,EAAE,IAAI,CAAC;CACjB,GAAG,IAAI,CAoCP;AAED,oCAAoC;AACpC,wBAAgB,aAAa,CAAC,KAAK,EAAE,IAAI,CAAC,SAAS,CAAC,GAAG,IAAI,CAAC,SAAS,CAAC,GAAG,OAAO,CAE/E;AAED,sCAAsC;AACtC,wBAAgB,eAAe,CAAC,KAAK,EAAE,IAAI,CAAC,SAAS,CAAC,GAAG,IAAI,CAAC,SAAS,CAAC,GAAG,OAAO,CAEjF;AAED,0CAA0C;AAC1C,wBAAgB,WAAW,CAAC,KAAK,EAAE,IAAI,CAAC,SAAS,CAAC,GAAG,IAAI,CAAC,SAAS,CAAC,GAAG,MAAM,CAE5E;AAED,0DAA0D;AAC1D,wBAAgB,cAAc,CAAC,KAAK,EAAE,IAAI,CAAC,SAAS,CAAC,GAAG,IAAI,CAAC,SAAS,CAAC,GAAG,SAAS,GAAG,UAAU,CAG/F;AAED,4FAA4F;AAC5F,wBAAgB,eAAe,CAAC,CAAC,SAAS,SAAS,EAAE,KAAK,EAAE,IAAI,CAAC,CAAC,CAAC,GAAG,IAAI,CAAC,CAAC,CAAC,GAAG,IAAI,CAAC,CAAC,CAAC,GAAG,IAAI,CAAC,CAAC,CAAC,CAEhG;AAMD,wDAAwD;AACxD,MAAM,WAAW,uBAAuB;IACtC,mDAAmD;IACnD,QAAQ,CAAC,EAAE,OAAO,CAAC;IACnB,oDAAoD;IACpD,SAAS,CAAC,EAAE,MAAM,CAAC;CACpB;AAED,wDAAwD;AACxD,MAAM,WAAW,uBAAuB;IACtC,+CAA+C;IAC/C,SAAS,CAAC,EAAE,MAAM,CAAC;IACnB,8BAA8B;IAC9B,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,8BAA8B;IAC9B,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,0EAA0E;IAC1E,SAAS,CAAC,EAAE,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,GAAG,IAAI,CAAC;CAC7C;AAED;;;;;;GAMG;AACH,wBAAgB,gBAAgB,CAC9B,MAAM,EAAE,IAAI,EAAE,EACd,OAAO,GAAE,uBAA4B,GACpC,MAAM,CAAC,IAAI,CAAC,CAqBd;AAED;;;;;;GAMG;AACH,wBAAgB,gBAAgB,CAC9B,MAAM,EAAE,IAAI,EAAE,EACd,OAAO,GAAE,uBAA4B,GACpC,MAAM,CAAC,IAAI,CAAC,CAqBd;AAMD;;;;;;;GAOG;AACH,wBAAgB,YAAY,CAC1B,IAAI,EAAE,IAAI,CAAC,SAAS,CAAC,EACrB,MAAM,EAAE,MAAM,EACd,IAAI,GAAE,KAAK,GAAG,cAAc,GAAG,SAAS,GAAG,SAAiB,GAC3D,MAAM,CAAC,IAAI,CAAC,CAed"}

package/dist/vendored/brepjs/topology/curveFns.js

@@ -1,191 +0,0 @@
-/**
- * Curve and 1D shape functions — functional replacements for _1DShape/Curve methods.
- * All functions accept branded Edge or Wire handles and return plain values.
- */
-import { getKernel } from '../kernel/index.js';
-import { castResultShape, disposeResultShape } from '../core/shapeTypes.js';
-import { ok, err } from '../core/result.js';
-import { typeCastError } from '../core/errors.js';
-import { isWire as isWireGuard, isEdge } from '../core/shapeTypes.js';
-// ---------------------------------------------------------------------------
-// Curve properties
-// ---------------------------------------------------------------------------
-/**
- * Get the geometric curve type of an edge or wire (LINE, CIRCLE, BSPLINE, etc.).
- */
-export function getCurveType(shape) {
-    return getKernel().curveType(shape.wrapped);
-}
-/** Get the start point of a curve. */
-export function curveStartPoint(shape) {
-    const [first] = getKernel().curveParameters(shape.wrapped);
-    return getKernel().curvePointAtParam(shape.wrapped, first);
-}
-/** Get the end point of a curve. */
-export function curveEndPoint(shape) {
-    const [, last] = getKernel().curveParameters(shape.wrapped);
-    return getKernel().curvePointAtParam(shape.wrapped, last);
-}
-/**
- * Get a point at a normalized parameter position on the curve.
- * @param shape - Edge or wire to evaluate.
- * @param position - Normalized parameter (0 = start, 0.5 = midpoint, 1 = end).
- */
-export function curvePointAt(shape, position = 0.5) {
-    const [first, last] = getKernel().curveParameters(shape.wrapped);
-    const param = first + (last - first) * position;
-    return getKernel().curvePointAtParam(shape.wrapped, param);
-}
-/**
- * Get the tangent vector at a normalized parameter position on the curve.
- * @param shape - Edge or wire to evaluate.
- * @param position - Normalized parameter (0 = start, 0.5 = midpoint, 1 = end).
- */
-export function curveTangentAt(shape, position = 0.5) {
-    const [first, last] = getKernel().curveParameters(shape.wrapped);
-    const param = first + (last - first) * position;
-    return getKernel().curveTangent(shape.wrapped, param).tangent;
-}
-/** Get the arc length of an edge or wire. */
-export function curveLength(shape) {
-    return getKernel().length(shape.wrapped);
-}
-/**
- * Axis of a circular edge: the circle's center plus the unit normal of its
- * plane. Returns null for non-circular curves.
- *
- * Derived kernel-agnostically from three sampled points (the circumcenter of a
- * triangle determines the unique circle through its vertices), so it works for
- * full circles and arcs alike without an analytic circle accessor.
- */
-export function curveAxis(shape) {
-    if (getCurveType(shape) !== 'CIRCLE')
-        return null;
-    const a = curvePointAt(shape, 0);
-    const b = curvePointAt(shape, 1 / 3);
-    const c = curvePointAt(shape, 2 / 3);
-    const ab = [b[0] - a[0], b[1] - a[1], b[2] - a[2]];
-    const ac = [c[0] - a[0], c[1] - a[1], c[2] - a[2]];
-    const m = [
-        ab[1] * ac[2] - ab[2] * ac[1],
-        ab[2] * ac[0] - ab[0] * ac[2],
-        ab[0] * ac[1] - ab[1] * ac[0],
-    ];
-    const mLenSq = m[0] * m[0] + m[1] * m[1] + m[2] * m[2];
-    if (mLenSq < 1e-18)
-        return null; // collinear samples; not a resolvable circle
-    const abSq = ab[0] * ab[0] + ab[1] * ab[1] + ab[2] * ab[2];
-    const acSq = ac[0] * ac[0] + ac[1] * ac[1] + ac[2] * ac[2];
-    // d = |ab|²·ac − |ac|²·ab, then center = a + (d × m) / (2|m|²).
-    const d = [
-        abSq * ac[0] - acSq * ab[0],
-        abSq * ac[1] - acSq * ab[1],
-        abSq * ac[2] - acSq * ab[2],
-    ];
-    const dxm = [
-        d[1] * m[2] - d[2] * m[1],
-        d[2] * m[0] - d[0] * m[2],
-        d[0] * m[1] - d[1] * m[0],
-    ];
-    const inv = 1 / (2 * mLenSq);
-    const origin = [a[0] + dxm[0] * inv, a[1] + dxm[1] * inv, a[2] + dxm[2] * inv];
-    const mLen = Math.sqrt(mLenSq);
-    const direction = [m[0] / mLen, m[1] / mLen, m[2] / mLen];
-    return { origin, direction };
-}
-/** Check if the curve is closed. */
-export function curveIsClosed(shape) {
-    return getKernel().curveIsClosed(shape.wrapped);
-}
-/** Check if the curve is periodic. */
-export function curveIsPeriodic(shape) {
-    return getKernel().curveIsPeriodic(shape.wrapped);
-}
-/** Get the period of a periodic curve. */
-export function curvePeriod(shape) {
-    return getKernel().curvePeriod(shape.wrapped);
-}
-/** Get the topological orientation of an edge or wire. */
-export function getOrientation(shape) {
-    const orient = getKernel().shapeOrientation(shape.wrapped);
-    return orient === 'forward' ? 'forward' : 'backward';
-}
-/** Flip the orientation of an edge or wire. Returns a new shape with the same dimension. */
-export function flipOrientation(shape) {
-    return castResultShape(getKernel().reverseShape(shape.wrapped));
-}
-/**
- * Interpolate a smooth BSpline curve that passes exactly through the given points.
- *
- * @param points - At least 2 points defining the curve path.
- * @param options - Interpolation options.
- * @returns An Edge representing the interpolated curve.
- */
-export function interpolateCurve(points, options = {}) {
-    if (points.length < 2) {
-        return err(typeCastError('INTERPOLATE_MIN_POINTS', 'Interpolation requires at least 2 points'));
-    }
-    try {
-        const result = getKernel().interpolatePoints(points, options);
-        const cast = castResultShape(result);
-        if (!isEdge(cast)) {
-            disposeResultShape(cast);
-            return err(typeCastError('INTERPOLATE_NOT_EDGE', 'Interpolation did not produce an edge'));
-        }
-        return ok(cast);
-    }
-    catch (e) {
-        return err(typeCastError('INTERPOLATE_FAILED', `Interpolation failed: ${e instanceof Error ? e.message : String(e)}`));
-    }
-}
-/**
- * Approximate a BSpline curve that passes near the given points.
- *
- * @param points - At least 2 points defining the curve path.
- * @param options - Approximation options.
- * @returns An Edge representing the approximated curve.
- */
-export function approximateCurve(points, options = {}) {
-    if (points.length < 2) {
-        return err(typeCastError('APPROXIMATE_MIN_POINTS', 'Approximation requires at least 2 points'));
-    }
-    try {
-        const result = getKernel().approximatePoints(points, options);
-        const cast = castResultShape(result);
-        if (!isEdge(cast)) {
-            disposeResultShape(cast);
-            return err(typeCastError('APPROXIMATE_NOT_EDGE', 'Approximation did not produce an edge'));
-        }
-        return ok(cast);
-    }
-    catch (e) {
-        return err(typeCastError('APPROXIMATE_FAILED', `Approximation failed: ${e instanceof Error ? e.message : String(e)}`));
-    }
-}
-// ---------------------------------------------------------------------------
-// 2D wire offset
-// ---------------------------------------------------------------------------
-/**
- * Offset a wire in 2D. Returns a new wire. Does NOT dispose the input.
- *
- * @param wire - The wire to offset.
- * @param offset - Offset distance (positive = outward, negative = inward).
- * @param kind - Join type for offset corners ('arc', 'intersection', or 'tangent').
- * @returns Ok with the offset wire, or Err if the operation fails.
- */
-export function offsetWire2D(wire, offset, kind = 'arc') {
-    const joinMap = {
-        arc: 'arc',
-        intersection: 'intersection',
-        tangent: 'tangent',
-        chamfer: 'intersection', // sharp/miter corners
-    };
-    const resultShape = getKernel().offsetWire2D(wire.wrapped, offset, joinMap[kind]);
-    const wrapped = castResultShape(resultShape);
-    if (!isWireGuard(wrapped)) {
-        disposeResultShape(wrapped);
-        return err(typeCastError('OFFSET_NOT_WIRE', 'Offset did not produce a Wire'));
-    }
-    return ok(wrapped);
-}
-//# sourceMappingURL=curveFns.js.map

package/dist/vendored/brepjs/topology/curveFns.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"curveFns.js","sourceRoot":"","sources":["../../../../src/vendored/brepjs/topology/curveFns.ts"],"names":[],"mappings":"AAAA;;;GAGG;AAEH,OAAO,EAAE,SAAS,EAAE,MAAM,oBAAoB,CAAC;AAG/C,OAAO,EAAE,eAAe,EAAE,kBAAkB,EAAE,MAAM,uBAAuB,CAAC;AAE5E,OAAO,EAAe,EAAE,EAAE,GAAG,EAAE,MAAM,mBAAmB,CAAC;AACzD,OAAO,EAAE,aAAa,EAAE,MAAM,mBAAmB,CAAC;AAClD,OAAO,EAAE,MAAM,IAAI,WAAW,EAAE,MAAM,EAAE,MAAM,uBAAuB,CAAC;AAEtE,8EAA8E;AAC9E,mBAAmB;AACnB,8EAA8E;AAE9E;;GAEG;AACH,MAAM,UAAU,YAAY,CAAC,KAAwC;IACnE,OAAO,SAAS,EAAE,CAAC,SAAS,CAAC,KAAK,CAAC,OAAO,CAAc,CAAC;AAC3D,CAAC;AAED,sCAAsC;AACtC,MAAM,UAAU,eAAe,CAAC,KAAwC;IACtE,MAAM,CAAC,KAAK,CAAC,GAAG,SAAS,EAAE,CAAC,eAAe,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC;IAC3D,OAAO,SAAS,EAAE,CAAC,iBAAiB,CAAC,KAAK,CAAC,OAAO,EAAE,KAAK,CAAC,CAAC;AAC7D,CAAC;AAED,oCAAoC;AACpC,MAAM,UAAU,aAAa,CAAC,KAAwC;IACpE,MAAM,CAAC,EAAE,IAAI,CAAC,GAAG,SAAS,EAAE,CAAC,eAAe,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC;IAC5D,OAAO,SAAS,EAAE,CAAC,iBAAiB,CAAC,KAAK,CAAC,OAAO,EAAE,IAAI,CAAC,CAAC;AAC5D,CAAC;AAED;;;;GAIG;AACH,MAAM,UAAU,YAAY,CAAC,KAAwC,EAAE,QAAQ,GAAG,GAAG;IACnF,MAAM,CAAC,KAAK,EAAE,IAAI,CAAC,GAAG,SAAS,EAAE,CAAC,eAAe,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC;IACjE,MAAM,KAAK,GAAG,KAAK,GAAG,CAAC,IAAI,GAAG,KAAK,CAAC,GAAG,QAAQ,CAAC;IAChD,OAAO,SAAS,EAAE,CAAC,iBAAiB,CAAC,KAAK,CAAC,OAAO,EAAE,KAAK,CAAC,CAAC;AAC7D,CAAC;AAED;;;;GAIG;AACH,MAAM,UAAU,cAAc,CAAC,KAAwC,EAAE,QAAQ,GAAG,GAAG;IACrF,MAAM,CAAC,KAAK,EAAE,IAAI,CAAC,GAAG,SAAS,EAAE,CAAC,eAAe,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC;IACjE,MAAM,KAAK,GAAG,KAAK,GAAG,CAAC,IAAI,GAAG,KAAK,CAAC,GAAG,QAAQ,CAAC;IAChD,OAAO,SAAS,EAAE,CAAC,YAAY,CAAC,KAAK,CAAC,OAAO,EAAE,KAAK,CAAC,CAAC,OAAO,CAAC;AAChE,CAAC;AAED,6CAA6C;AAC7C,MAAM,UAAU,WAAW,CAAC,KAAwC;IAClE,OAAO,SAAS,EAAE,CAAC,MAAM,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC;AAC3C,CAAC;AAED;;;;;;;GAOG;AACH,MAAM,UAAU,SAAS,CAAC,KAAwC;IAIhE,IAAI,YAAY,CAAC,KAAK,CAAC,KAAK,QAAQ;QAAE,OAAO,IAAI,CAAC;IAElD,MAAM,CAAC,GAAG,YAAY,CAAC,KAAK,EAAE,CAAC,CAAC,CAAC;IACjC,MAAM,CAAC,GAAG,YAAY,CAAC,KAAK,EAAE,CAAC,GAAG,CAAC,CAAC,CAAC;IACrC,MAAM,CAAC,GAAG,YAAY,CAAC,KAAK,EAAE,CAAC,GAAG,CAAC,CAAC,CAAC;IAErC,MAAM,EAAE,GAAS,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IACzD,MAAM,EAAE,GAAS,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IACzD,MAAM,CAAC,GAAS;QACd,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC;QAC7B,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC;QAC7B,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC;KAC9B,CAAC;IACF,MAAM,MAAM,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC;IACvD,IAAI,MAAM,GAAG,KAAK;QAAE,OAAO,IAAI,CAAC,CAAC,6CAA6C;IAE9E,MAAM,IAAI,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,CAAC;IAC3D,MAAM,IAAI,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,CAAC;IAC3D,gEAAgE;IAChE,MAAM,CAAC,GAAS;QACd,IAAI,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,IAAI,GAAG,EAAE,CAAC,CAAC,CAAC;QAC3B,IAAI,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,IAAI,GAAG,EAAE,CAAC,CAAC,CAAC;QAC3B,IAAI,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,IAAI,GAAG,EAAE,CAAC,CAAC,CAAC;KAC5B,CAAC;IACF,MAAM,GAAG,GAAS;QAChB,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC;QACzB,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC;QACzB,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC;KAC1B,CAAC;IACF,MAAM,GAAG,GAAG,CAAC,GAAG,CAAC,CAAC,GAAG,MAAM,CAAC,CAAC;IAC7B,MAAM,MAAM,GAAS,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,GAAG,CAAC,CAAC,CAAC,GAAG,GAAG,EAAE,CAAC,CAAC,CAAC,CAAC,GAAG,GAAG,CAAC,CAAC,CAAC,GAAG,GAAG,EAAE,CAAC,CAAC,CAAC,CAAC,GAAG,GAAG,CAAC,CAAC,CAAC,GAAG,GAAG,CAAC,CAAC;IAErF,MAAM,IAAI,GAAG,IAAI,CAAC,IAAI,CAAC,MAAM,CAAC,CAAC;IAC/B,MAAM,SAAS,GAAS,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,IAAI,EAAE,CAAC,CAAC,CAAC,CAAC,GAAG,IAAI,EAAE,CAAC,CAAC,CAAC,CAAC,GAAG,IAAI,CAAC,CAAC;IAChE,OAAO,EAAE,MAAM,EAAE,SAAS,EAAE,CAAC;AAC/B,CAAC;AAED,oCAAoC;AACpC,MAAM,UAAU,aAAa,CAAC,KAAwC;IACpE,OAAO,SAAS,EAAE,CAAC,aAAa,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC;AAClD,CAAC;AAED,sCAAsC;AACtC,MAAM,UAAU,eAAe,CAAC,KAAwC;IACtE,OAAO,SAAS,EAAE,CAAC,eAAe,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC;AACpD,CAAC;AAED,0CAA0C;AAC1C,MAAM,UAAU,WAAW,CAAC,KAAwC;IAClE,OAAO,SAAS,EAAE,CAAC,WAAW,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC;AAChD,CAAC;AAED,0DAA0D;AAC1D,MAAM,UAAU,cAAc,CAAC,KAAwC;IACrE,MAAM,MAAM,GAAG,SAAS,EAAE,CAAC,gBAAgB,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC;IAC3D,OAAO,MAAM,KAAK,SAAS,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,UAAU,CAAC;AACvD,CAAC;AAED,4FAA4F;AAC5F,MAAM,UAAU,eAAe,CAAsB,KAAwB;IAC3E,OAAO,eAAe,CAAI,SAAS,EAAE,CAAC,YAAY,CAAC,KAAK,CAAC,OAAO,CAAC,CAAsB,CAAC;AAC1F,CAAC;AA0BD;;;;;;GAMG;AACH,MAAM,UAAU,gBAAgB,CAC9B,MAAc,EACd,UAAmC,EAAE;IAErC,IAAI,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QACtB,OAAO,GAAG,CAAC,aAAa,CAAC,wBAAwB,EAAE,0CAA0C,CAAC,CAAC,CAAC;IAClG,CAAC;IAED,IAAI,CAAC;QACH,MAAM,MAAM,GAAG,SAAS,EAAE,CAAC,iBAAiB,CAAC,MAAoC,EAAE,OAAO,CAAC,CAAC;QAC5F,MAAM,IAAI,GAAG,eAAe,CAAC,MAAM,CAAC,CAAC;QACrC,IAAI,CAAC,MAAM,CAAC,IAAI,CAAC,EAAE,CAAC;YAClB,kBAAkB,CAAC,IAAI,CAAC,CAAC;YACzB,OAAO,GAAG,CAAC,aAAa,CAAC,sBAAsB,EAAE,uCAAuC,CAAC,CAAC,CAAC;QAC7F,CAAC;QACD,OAAO,EAAE,CAAC,IAAI,CAAC,CAAC;IAClB,CAAC;IAAC,OAAO,CAAC,EAAE,CAAC;QACX,OAAO,GAAG,CACR,aAAa,CACX,oBAAoB,EACpB,yBAAyB,CAAC,YAAY,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,CACtE,CACF,CAAC;IACJ,CAAC;AACH,CAAC;AAED;;;;;;GAMG;AACH,MAAM,UAAU,gBAAgB,CAC9B,MAAc,EACd,UAAmC,EAAE;IAErC,IAAI,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QACtB,OAAO,GAAG,CAAC,aAAa,CAAC,wBAAwB,EAAE,0CAA0C,CAAC,CAAC,CAAC;IAClG,CAAC;IAED,IAAI,CAAC;QACH,MAAM,MAAM,GAAG,SAAS,EAAE,CAAC,iBAAiB,CAAC,MAAoC,EAAE,OAAO,CAAC,CAAC;QAC5F,MAAM,IAAI,GAAG,eAAe,CAAC,MAAM,CAAC,CAAC;QACrC,IAAI,CAAC,MAAM,CAAC,IAAI,CAAC,EAAE,CAAC;YAClB,kBAAkB,CAAC,IAAI,CAAC,CAAC;YACzB,OAAO,GAAG,CAAC,aAAa,CAAC,sBAAsB,EAAE,uCAAuC,CAAC,CAAC,CAAC;QAC7F,CAAC;QACD,OAAO,EAAE,CAAC,IAAI,CAAC,CAAC;IAClB,CAAC;IAAC,OAAO,CAAC,EAAE,CAAC;QACX,OAAO,GAAG,CACR,aAAa,CACX,oBAAoB,EACpB,yBAAyB,CAAC,YAAY,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,CACtE,CACF,CAAC;IACJ,CAAC;AACH,CAAC;AAED,8EAA8E;AAC9E,iBAAiB;AACjB,8EAA8E;AAE9E;;;;;;;GAOG;AACH,MAAM,UAAU,YAAY,CAC1B,IAAqB,EACrB,MAAc,EACd,OAAuD,KAAK;IAE5D,MAAM,OAAO,GAAuD;QAClE,GAAG,EAAE,KAAK;QACV,YAAY,EAAE,cAAc;QAC5B,OAAO,EAAE,SAAS;QAClB,OAAO,EAAE,cAAc,EAAE,sBAAsB;KAChD,CAAC;IACF,MAAM,WAAW,GAAG,SAAS,EAAE,CAAC,YAAY,CAAC,IAAI,CAAC,OAAO,EAAE,MAAM,EAAE,OAAO,CAAC,IAAI,CAAC,CAAC,CAAC;IAClF,MAAM,OAAO,GAAG,eAAe,CAAC,WAAW,CAAC,CAAC;IAE7C,IAAI,CAAC,WAAW,CAAC,OAAO,CAAC,EAAE,CAAC;QAC1B,kBAAkB,CAAC,OAAO,CAAC,CAAC;QAC5B,OAAO,GAAG,CAAC,aAAa,CAAC,iBAAiB,EAAE,+BAA+B,CAAC,CAAC,CAAC;IAChF,CAAC;IACD,OAAO,EAAE,CAAC,OAAO,CAAC,CAAC;AACrB,CAAC","sourcesContent":["/**\n * Curve and 1D shape functions — functional replacements for _1DShape/Curve methods.\n * All functions accept branded Edge or Wire handles and return plain values.\n */\n\nimport { getKernel } from '../kernel/index.js';\nimport type { Vec3 } from '../core/types.js';\nimport type { Dimension, Edge, Wire } from '../core/shapeTypes.js';\nimport { castResultShape, disposeResultShape } from '../core/shapeTypes.js';\nimport type { CurveType } from '../core/typeDiscriminants.js';\nimport { type Result, ok, err } from '../core/result.js';\nimport { typeCastError } from '../core/errors.js';\nimport { isWire as isWireGuard, isEdge } from '../core/shapeTypes.js';\n\n// ---------------------------------------------------------------------------\n// Curve properties\n// ---------------------------------------------------------------------------\n\n/**\n * Get the geometric curve type of an edge or wire (LINE, CIRCLE, BSPLINE, etc.).\n */\nexport function getCurveType(shape: Edge<Dimension> | Wire<Dimension>): CurveType {\n  return getKernel().curveType(shape.wrapped) as CurveType;\n}\n\n/** Get the start point of a curve. */\nexport function curveStartPoint(shape: Edge<Dimension> | Wire<Dimension>): Vec3 {\n  const [first] = getKernel().curveParameters(shape.wrapped);\n  return getKernel().curvePointAtParam(shape.wrapped, first);\n}\n\n/** Get the end point of a curve. */\nexport function curveEndPoint(shape: Edge<Dimension> | Wire<Dimension>): Vec3 {\n  const [, last] = getKernel().curveParameters(shape.wrapped);\n  return getKernel().curvePointAtParam(shape.wrapped, last);\n}\n\n/**\n * Get a point at a normalized parameter position on the curve.\n * @param shape - Edge or wire to evaluate.\n * @param position - Normalized parameter (0 = start, 0.5 = midpoint, 1 = end).\n */\nexport function curvePointAt(shape: Edge<Dimension> | Wire<Dimension>, position = 0.5): Vec3 {\n  const [first, last] = getKernel().curveParameters(shape.wrapped);\n  const param = first + (last - first) * position;\n  return getKernel().curvePointAtParam(shape.wrapped, param);\n}\n\n/**\n * Get the tangent vector at a normalized parameter position on the curve.\n * @param shape - Edge or wire to evaluate.\n * @param position - Normalized parameter (0 = start, 0.5 = midpoint, 1 = end).\n */\nexport function curveTangentAt(shape: Edge<Dimension> | Wire<Dimension>, position = 0.5): Vec3 {\n  const [first, last] = getKernel().curveParameters(shape.wrapped);\n  const param = first + (last - first) * position;\n  return getKernel().curveTangent(shape.wrapped, param).tangent;\n}\n\n/** Get the arc length of an edge or wire. */\nexport function curveLength(shape: Edge<Dimension> | Wire<Dimension>): number {\n  return getKernel().length(shape.wrapped);\n}\n\n/**\n * Axis of a circular edge: the circle's center plus the unit normal of its\n * plane. Returns null for non-circular curves.\n *\n * Derived kernel-agnostically from three sampled points (the circumcenter of a\n * triangle determines the unique circle through its vertices), so it works for\n * full circles and arcs alike without an analytic circle accessor.\n */\nexport function curveAxis(shape: Edge<Dimension> | Wire<Dimension>): {\n  origin: Vec3;\n  direction: Vec3;\n} | null {\n  if (getCurveType(shape) !== 'CIRCLE') return null;\n\n  const a = curvePointAt(shape, 0);\n  const b = curvePointAt(shape, 1 / 3);\n  const c = curvePointAt(shape, 2 / 3);\n\n  const ab: Vec3 = [b[0] - a[0], b[1] - a[1], b[2] - a[2]];\n  const ac: Vec3 = [c[0] - a[0], c[1] - a[1], c[2] - a[2]];\n  const m: Vec3 = [\n    ab[1] * ac[2] - ab[2] * ac[1],\n    ab[2] * ac[0] - ab[0] * ac[2],\n    ab[0] * ac[1] - ab[1] * ac[0],\n  ];\n  const mLenSq = m[0] * m[0] + m[1] * m[1] + m[2] * m[2];\n  if (mLenSq < 1e-18) return null; // collinear samples; not a resolvable circle\n\n  const abSq = ab[0] * ab[0] + ab[1] * ab[1] + ab[2] * ab[2];\n  const acSq = ac[0] * ac[0] + ac[1] * ac[1] + ac[2] * ac[2];\n  // d = |ab|²·ac − |ac|²·ab, then center = a + (d × m) / (2|m|²).\n  const d: Vec3 = [\n    abSq * ac[0] - acSq * ab[0],\n    abSq * ac[1] - acSq * ab[1],\n    abSq * ac[2] - acSq * ab[2],\n  ];\n  const dxm: Vec3 = [\n    d[1] * m[2] - d[2] * m[1],\n    d[2] * m[0] - d[0] * m[2],\n    d[0] * m[1] - d[1] * m[0],\n  ];\n  const inv = 1 / (2 * mLenSq);\n  const origin: Vec3 = [a[0] + dxm[0] * inv, a[1] + dxm[1] * inv, a[2] + dxm[2] * inv];\n\n  const mLen = Math.sqrt(mLenSq);\n  const direction: Vec3 = [m[0] / mLen, m[1] / mLen, m[2] / mLen];\n  return { origin, direction };\n}\n\n/** Check if the curve is closed. */\nexport function curveIsClosed(shape: Edge<Dimension> | Wire<Dimension>): boolean {\n  return getKernel().curveIsClosed(shape.wrapped);\n}\n\n/** Check if the curve is periodic. */\nexport function curveIsPeriodic(shape: Edge<Dimension> | Wire<Dimension>): boolean {\n  return getKernel().curveIsPeriodic(shape.wrapped);\n}\n\n/** Get the period of a periodic curve. */\nexport function curvePeriod(shape: Edge<Dimension> | Wire<Dimension>): number {\n  return getKernel().curvePeriod(shape.wrapped);\n}\n\n/** Get the topological orientation of an edge or wire. */\nexport function getOrientation(shape: Edge<Dimension> | Wire<Dimension>): 'forward' | 'backward' {\n  const orient = getKernel().shapeOrientation(shape.wrapped);\n  return orient === 'forward' ? 'forward' : 'backward';\n}\n\n/** Flip the orientation of an edge or wire. Returns a new shape with the same dimension. */\nexport function flipOrientation<D extends Dimension>(shape: Edge<D> | Wire<D>): Edge<D> | Wire<D> {\n  return castResultShape<D>(getKernel().reverseShape(shape.wrapped)) as Edge<D> | Wire<D>;\n}\n\n// ---------------------------------------------------------------------------\n// BSpline from points\n// ---------------------------------------------------------------------------\n\n/** Options for BSpline interpolation through points. */\nexport interface InterpolateCurveOptions {\n  /** If true, create a periodic (closed) BSpline. */\n  periodic?: boolean;\n  /** Fitting tolerance (default varies by kernel). */\n  tolerance?: number;\n}\n\n/** Options for BSpline approximation through points. */\nexport interface ApproximateCurveOptions {\n  /** Maximum deviation from the input points. */\n  tolerance?: number;\n  /** Minimum BSpline degree. */\n  degMin?: number;\n  /** Maximum BSpline degree. */\n  degMax?: number;\n  /** Smoothing weights `[weight1, weight2, weight3]` or null to disable. */\n  smoothing?: [number, number, number] | null;\n}\n\n/**\n * Interpolate a smooth BSpline curve that passes exactly through the given points.\n *\n * @param points - At least 2 points defining the curve path.\n * @param options - Interpolation options.\n * @returns An Edge representing the interpolated curve.\n */\nexport function interpolateCurve(\n  points: Vec3[],\n  options: InterpolateCurveOptions = {}\n): Result<Edge> {\n  if (points.length < 2) {\n    return err(typeCastError('INTERPOLATE_MIN_POINTS', 'Interpolation requires at least 2 points'));\n  }\n\n  try {\n    const result = getKernel().interpolatePoints(points as [number, number, number][], options);\n    const cast = castResultShape(result);\n    if (!isEdge(cast)) {\n      disposeResultShape(cast);\n      return err(typeCastError('INTERPOLATE_NOT_EDGE', 'Interpolation did not produce an edge'));\n    }\n    return ok(cast);\n  } catch (e) {\n    return err(\n      typeCastError(\n        'INTERPOLATE_FAILED',\n        `Interpolation failed: ${e instanceof Error ? e.message : String(e)}`\n      )\n    );\n  }\n}\n\n/**\n * Approximate a BSpline curve that passes near the given points.\n *\n * @param points - At least 2 points defining the curve path.\n * @param options - Approximation options.\n * @returns An Edge representing the approximated curve.\n */\nexport function approximateCurve(\n  points: Vec3[],\n  options: ApproximateCurveOptions = {}\n): Result<Edge> {\n  if (points.length < 2) {\n    return err(typeCastError('APPROXIMATE_MIN_POINTS', 'Approximation requires at least 2 points'));\n  }\n\n  try {\n    const result = getKernel().approximatePoints(points as [number, number, number][], options);\n    const cast = castResultShape(result);\n    if (!isEdge(cast)) {\n      disposeResultShape(cast);\n      return err(typeCastError('APPROXIMATE_NOT_EDGE', 'Approximation did not produce an edge'));\n    }\n    return ok(cast);\n  } catch (e) {\n    return err(\n      typeCastError(\n        'APPROXIMATE_FAILED',\n        `Approximation failed: ${e instanceof Error ? e.message : String(e)}`\n      )\n    );\n  }\n}\n\n// ---------------------------------------------------------------------------\n// 2D wire offset\n// ---------------------------------------------------------------------------\n\n/**\n * Offset a wire in 2D. Returns a new wire. Does NOT dispose the input.\n *\n * @param wire - The wire to offset.\n * @param offset - Offset distance (positive = outward, negative = inward).\n * @param kind - Join type for offset corners ('arc', 'intersection', or 'tangent').\n * @returns Ok with the offset wire, or Err if the operation fails.\n */\nexport function offsetWire2D(\n  wire: Wire<Dimension>,\n  offset: number,\n  kind: 'arc' | 'intersection' | 'tangent' | 'chamfer' = 'arc'\n): Result<Wire> {\n  const joinMap: Record<string, 'arc' | 'intersection' | 'tangent'> = {\n    arc: 'arc',\n    intersection: 'intersection',\n    tangent: 'tangent',\n    chamfer: 'intersection', // sharp/miter corners\n  };\n  const resultShape = getKernel().offsetWire2D(wire.wrapped, offset, joinMap[kind]);\n  const wrapped = castResultShape(resultShape);\n\n  if (!isWireGuard(wrapped)) {\n    disposeResultShape(wrapped);\n    return err(typeCastError('OFFSET_NOT_WIRE', 'Offset did not produce a Wire'));\n  }\n  return ok(wrapped);\n}\n"]}

package/dist/vendored/brepjs/topology/evolutionFns.d.ts

@@ -1,78 +0,0 @@
-/**
- * Evolution-tracking variants of boolean and modifier operations.
- *
- * These functions mirror the standard fuse/cut/intersect/fillet/chamfer/shell
- * operations but additionally return the ShapeEvolution data, enabling
- * persistent face selections, constraint tracking, and custom face-level logic.
- */
-import type { Edge, Face, Shape3D } from '../core/shapeTypes.js';
-import type { ValidSolid } from '../core/validityTypes.js';
-import { type Result } from '../core/result.js';
-import type { BooleanOptions, ShapeEvolution } from '../kernel/types.js';
-/** Result of an operation with face evolution tracking. */
-export interface EvolutionResult<T> {
-    readonly shape: T;
-    readonly evolution: ShapeEvolution;
-}
-/**
- * Fuse two 3D shapes together (boolean union), returning both the result
- * shape and the face evolution data.
- *
- * @param a - The first operand.
- * @param b - The second operand.
- * @param options - Boolean operation options.
- * @returns Ok with the fused shape and evolution, or Err on failure.
- */
-export declare function fuseWithEvolution(a: ValidSolid, b: ValidSolid, options?: BooleanOptions): Result<EvolutionResult<ValidSolid>>;
-export declare function fuseWithEvolution(a: Shape3D, b: Shape3D, options?: BooleanOptions): Result<EvolutionResult<Shape3D>>;
-/**
- * Cut a tool shape from a base shape (boolean subtraction), returning both
- * the result shape and the face evolution data.
- *
- * @param base - The shape to cut from.
- * @param tool - The shape to subtract.
- * @param options - Boolean operation options.
- * @returns Ok with the cut shape and evolution, or Err on failure.
- */
-export declare function cutWithEvolution(base: ValidSolid, tool: ValidSolid, options?: BooleanOptions): Result<EvolutionResult<ValidSolid>>;
-export declare function cutWithEvolution(base: Shape3D, tool: Shape3D, options?: BooleanOptions): Result<EvolutionResult<Shape3D>>;
-/**
- * Compute the intersection of two shapes (boolean common), returning both
- * the result shape and the face evolution data.
- *
- * @param a - The first operand.
- * @param b - The second operand.
- * @param options - Boolean operation options.
- * @returns Ok with the intersection and evolution, or Err on failure.
- */
-export declare function intersectWithEvolution(a: ValidSolid, b: ValidSolid, options?: BooleanOptions): Result<EvolutionResult<ValidSolid>>;
-export declare function intersectWithEvolution(a: Shape3D, b: Shape3D, options?: BooleanOptions): Result<EvolutionResult<Shape3D>>;
-/**
- * Apply a fillet (rounded edge) to selected edges, returning both
- * the result shape and the face evolution data.
- *
- * @param shape - The shape to modify.
- * @param edges - Edges to fillet. Pass `undefined` to fillet all edges.
- * @param radius - Constant radius, variable radius `[r1, r2]`, or per-edge callback.
- */
-export declare function filletWithEvolution(shape: ValidSolid, edges: ReadonlyArray<Edge> | undefined, radius: number | [number, number] | ((edge: Edge) => number | [number, number] | null)): Result<EvolutionResult<ValidSolid>>;
-/**
- * Apply a chamfer (beveled edge) to selected edges, returning both
- * the result shape and the face evolution data.
- *
- * @param shape - The shape to modify.
- * @param edges - Edges to chamfer. Pass `undefined` to chamfer all edges.
- * @param distance - Symmetric distance, asymmetric `[d1, d2]`, or per-edge callback.
- */
-export declare function chamferWithEvolution(shape: ValidSolid, edges: ReadonlyArray<Edge> | undefined, distance: number | [number, number] | ((edge: Edge) => number | [number, number] | null)): Result<EvolutionResult<ValidSolid>>;
-/**
- * Create a hollow shell by removing faces and offsetting remaining walls,
- * returning both the result shape and the face evolution data.
- *
- * @param shape - The solid to hollow out.
- * @param faces - Faces to remove.
- * @param thickness - Wall thickness.
- * @param tolerance - Shell operation tolerance (default 1e-3).
- */
-export declare function shellWithEvolution(shape: ValidSolid, faces: ReadonlyArray<Face>, thickness: number, tolerance?: number): Result<EvolutionResult<Shape3D>>;
-//# sourceMappingURL=evolutionFns.d.ts.map

package/dist/vendored/brepjs/topology/evolutionFns.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"evolutionFns.d.ts","sourceRoot":"","sources":["../../../../src/vendored/brepjs/topology/evolutionFns.ts"],"names":[],"mappings":"AAAA;;;;;;GAMG;AAGH,OAAO,KAAK,EAAE,IAAI,EAAE,IAAI,EAAE,OAAO,EAAE,MAAM,uBAAuB,CAAC;AACjE,OAAO,KAAK,EAAE,UAAU,EAAE,MAAM,0BAA0B,CAAC;AAU3D,OAAO,EAAE,KAAK,MAAM,EAAkB,MAAM,mBAAmB,CAAC;AAEhE,OAAO,KAAK,EAAE,cAAc,EAAe,cAAc,EAAc,MAAM,oBAAoB,CAAC;AAQlG,2DAA2D;AAC3D,MAAM,WAAW,eAAe,CAAC,CAAC;IAChC,QAAQ,CAAC,KAAK,EAAE,CAAC,CAAC;IAClB,QAAQ,CAAC,SAAS,EAAE,cAAc,CAAC;CACpC;AAkFD;;;;;;;;GAQG;AACH,wBAAgB,iBAAiB,CAC/B,CAAC,EAAE,UAAU,EACb,CAAC,EAAE,UAAU,EACb,OAAO,CAAC,EAAE,cAAc,GACvB,MAAM,CAAC,eAAe,CAAC,UAAU,CAAC,CAAC,CAAC;AACvC,wBAAgB,iBAAiB,CAC/B,CAAC,EAAE,OAAO,EACV,CAAC,EAAE,OAAO,EACV,OAAO,CAAC,EAAE,cAAc,GACvB,MAAM,CAAC,eAAe,CAAC,OAAO,CAAC,CAAC,CAAC;AAgCpC;;;;;;;;GAQG;AACH,wBAAgB,gBAAgB,CAC9B,IAAI,EAAE,UAAU,EAChB,IAAI,EAAE,UAAU,EAChB,OAAO,CAAC,EAAE,cAAc,GACvB,MAAM,CAAC,eAAe,CAAC,UAAU,CAAC,CAAC,CAAC;AACvC,wBAAgB,gBAAgB,CAC9B,IAAI,EAAE,OAAO,EACb,IAAI,EAAE,OAAO,EACb,OAAO,CAAC,EAAE,cAAc,GACvB,MAAM,CAAC,eAAe,CAAC,OAAO,CAAC,CAAC,CAAC;AAgCpC;;;;;;;;GAQG;AACH,wBAAgB,sBAAsB,CACpC,CAAC,EAAE,UAAU,EACb,CAAC,EAAE,UAAU,EACb,OAAO,CAAC,EAAE,cAAc,GACvB,MAAM,CAAC,eAAe,CAAC,UAAU,CAAC,CAAC,CAAC;AACvC,wBAAgB,sBAAsB,CACpC,CAAC,EAAE,OAAO,EACV,CAAC,EAAE,OAAO,EACV,OAAO,CAAC,EAAE,cAAc,GACvB,MAAM,CAAC,eAAe,CAAC,OAAO,CAAC,CAAC,CAAC;AAoCpC;;;;;;;GAOG;AAEH,wBAAgB,mBAAmB,CACjC,KAAK,EAAE,UAAU,EACjB,KAAK,EAAE,aAAa,CAAC,IAAI,CAAC,GAAG,SAAS,EACtC,MAAM,EAAE,MAAM,GAAG,CAAC,MAAM,EAAE,MAAM,CAAC,GAAG,CAAC,CAAC,IAAI,EAAE,IAAI,KAAK,MAAM,GAAG,CAAC,MAAM,EAAE,MAAM,CAAC,GAAG,IAAI,CAAC,GACrF,MAAM,CAAC,eAAe,CAAC,UAAU,CAAC,CAAC,CAwFrC;AAED;;;;;;;GAOG;AAEH,wBAAgB,oBAAoB,CAClC,KAAK,EAAE,UAAU,EACjB,KAAK,EAAE,aAAa,CAAC,IAAI,CAAC,GAAG,SAAS,EACtC,QAAQ,EAAE,MAAM,GAAG,CAAC,MAAM,EAAE,MAAM,CAAC,GAAG,CAAC,CAAC,IAAI,EAAE,IAAI,KAAK,MAAM,GAAG,CAAC,MAAM,EAAE,MAAM,CAAC,GAAG,IAAI,CAAC,GACvF,MAAM,CAAC,eAAe,CAAC,UAAU,CAAC,CAAC,CA6ErC;AAED;;;;;;;;GAQG;AACH,wBAAgB,kBAAkB,CAChC,KAAK,EAAE,UAAU,EACjB,KAAK,EAAE,aAAa,CAAC,IAAI,CAAC,EAC1B,SAAS,EAAE,MAAM,EACjB,SAAS,SAAO,GACf,MAAM,CAAC,eAAe,CAAC,OAAO,CAAC,CAAC,CAqClC"}