@faicad/faijs 0.29.5 → 0.31.1

package/dist/mesh/io.js

@@ -6,19 +6,32 @@
  * 坐标永远以 faijs 基准长度单位（mm）存储 — Shape 不贴 unit 标签（D3）。
  *
  * 单位换算边界（unit-system §5.2）：
- * - STL 无单位元数据 → 由 `opts.unit` 显式声明，缺省 mm，不做启发式猜测。
+ * - 本模块只处理 **mesh 格式（STL/3MF）**，坐标可直接折算 → `opts.unit` 提供即
+ *   **强制设置模型的源单位**（直接指定，覆盖/忽略模型内部记录的单位——STL 无
+ *   内部单位、3MF `<model unit>` 声明被覆盖），按 `unitScale(unit)` 折算坐标。
+ *   它**只可能来自调用方的显式知识**（脚本作者手写 `cad.load({ file, unit })`、
+ *   或宿主让用户选定单位后传入）；调用方不知道单位时**必须省略**——省略时：
+ *   STL 走 faijs 启发式（`guessStlUnit`，unified 方案 §6.1/§8 —— 3d_editor
+ *   迁移回归的单位断言依赖此行为）、3MF 走文件 `<model unit>`（无声明 →
+ *   millimeter）。猜测/折算收敛在 faijs 内（红线 R0：宿主不自实现单位换算），
+ *   G0 = 折算后坐标，渲染 = 拓扑 = G0。
+ * - **STEP/.brep 不经过本模块**（走 BREP 链，load op 内 OCCT 读取）：OCCT 按
+ *   文件内部单位声明折算（SI_UNIT），**不支持强制设置单位**——load op 对
+ *   BREP 路径 + 用户显式 unit 直接**明确报错**（不缩放、不 workaround）。
  * - 3MF `<model unit>` 由解析器读取并换算（micron/mm/cm/inch/foot/meter）。
  *
  * 返回契约（unit-system §10.6）：`importFile` 返回 `{ shape, unit }` — `unit`
- * 是文件**自己声明的单位**（3MF `<model unit>`、STEP 单位实体），无声明格式
- * （STL）为 null（此时 `opts.unit` 决定刻度）。坐标恒为基准值 — `unit` 只作
- * 元数据（sourceUnit 记录、导出目标判定），绝不参与几何缩放（读入折算已由
- * 内核/解析器完成，二次缩放 = 双重换算）。
+ * 是文件源单位（必然有值；faijs 是单一真源）：3MF 取 opts.unit（强制）或文件
+ * 声明（无声明 → millimeter），STL 取 opts.unit 或 guessStlUnit 启发式猜测。
+ * 坐标恒为基准值 — `unit` 只作元数据（sourceUnit 记录、导出目标判定），绝不
+ * 参与几何缩放（读入折算已由解析器完成，二次缩放 = 双重换算）。
  */
 import { geoToManifoldMesh } from '../boolean/geo-convert.js';
 import { parseStl } from './stl-loader.js';
 import { parseThreemf } from './threemf-loader.js';
-import { mm } from '../units.js';
+import { parseBambu3mfFromEntries } from './threemf-bambu.js';
+import { unitScale } from '../units.js';
+import { guessStlUnit } from './stl-unit.js';
 /** SI prefixes that may precede .METRE. in a STEP SI_UNIT, → faijs UnitName. */
 const SI_PREFIX_TO_UNIT = {
     '.MILLI.': 'mm',
@@ -92,68 +105,224 @@ export function detectStepUnit(stepText) {
  * @param buffer - the raw file bytes to parse (already decompressed; stpz
  *   unzipping is the caller's job — faijs never unzips implicitly).
  * @param format - format identifier such as 'stl', '3mf'/'threemf' or 'step'
- *   (defaults to 'stl').
- * @param opts - optional settings; `unit` declares the source unit for
- *   formats without unit metadata (e.g. STL). Defaults to mm.
- * @returns the shape with base-unit coordinates plus the file's own declared
- *   unit (`unit`, metadata only; null when the format has no declaration).
+ *   (defaults to 'stl'). **仅 mesh 格式（STL/3MF）走本模块**；STEP/BREP 走
+ *   BREP 链（load op 内 OCCT 读取，不支持强制设置单位）。
+ * @param opts - optional settings; `unit` (a UnitName string) **force-sets the
+ *   model's source unit** (STL/3MF): it is NOT a default, it directly specifies
+ *   the unit and overrides/ignores any unit recorded inside the model (3MF
+ *   `<model unit>`; STL has none), geometry scaled by `unitScale(unit)`. Only
+ *   provide it when the caller actually knows the unit (author-written
+ *   `cad.load({ file, unit })`, or a host unit picker). When the caller does
+ *   NOT know the unit, it MUST omit `unit` — STL then guesses via
+ *   `guessStlUnit` (the only allowed guessing path), 3MF uses the file
+ *   declaration (none → millimeter). A wrong explicit unit scales geometry
+ *   wrongly and is never re-guessed.
+ * @returns the shape with base-unit coordinates plus the file's source unit
+ *   (`unit`, metadata only; always present — faijs is the single source of truth).
  */
 export async function importFile(buffer, format, opts) {
     const fmt = (format ?? 'stl').toLowerCase();
     if (fmt === '3mf' || fmt === 'threemf') {
-        const archive = await parseThreemf(buffer);
-        // §5.4 单零件收敛：只取**第一个**对象实例（declaration order — `<build><item>`
-        // 序，见 threemf-loader）构造成单一 part；多对象文件记 multiPartCount 供上层
-        // 登记"多零件降级"警告。坐标已在 parseThreemf 里折算为 faijs 基准单位。
-        const first = archive.objects[0];
-        if (!first) {
+        const archive = await parseThreemf(buffer, opts);
+        // P0（方案 §5.4）：不再折叠——返回全部 `<build><item>` 对象（declaration order，
+        // 坐标已在 parseThreemf 里折算为 faijs 基准单位）。`shape` 保留为 parts[0]
+        // （单零件兼容，过渡期）。
+        if (archive.objects.length === 0) {
             throw new Error('[mesh/io] 3MF contains no objects');
         }
-        const multiPartCount = archive.objects.length > 1 ? archive.objects.length : undefined;
-        const shape = {
-            positions: first.positions,
-            indices: first.indices,
-            // P2（方案 §5 3MF 行）：对象级 baseColor → appearance.color（sRGB 原值，
-            // 宽容兼容：无 baseColor 不带 appearance）。colorgroup（vertexColors）与
-            // 逐三角形材质属 Phase 2（materialGroups / vertexColors），P2 不映射。
-            ...(first.baseColor ? { appearance: { color: [first.baseColor[0], first.baseColor[1], first.baseColor[2]] } } : {}),
-            // P4（方案 §5 3MF 行）：逐三角形 basematerials（p1=p2=p3）→ materialGroups
-            // （三角形区间 + appearance.color）；无则不带。vertexColors（colorgroup）
-            // 由上层（编辑器导入路径）消费，io 单零件收敛不展开为材质分组。
-            ...(first.materialGroups && first.materialGroups.length > 0
-                ? {
-                    materialGroups: first.materialGroups.map((g) => ({
-                        start: g.start,
-                        count: g.count,
-                        appearance: { color: [g.color[0], g.color[1], g.color[2]] },
-                    })),
+        // Bambu 元数据（盘号/挤出机/视图变换）：有 Bambu 配置才产生内容，普通 3MF 返回空表。
+        // P4：根 model XML 直传（3MF `<build>` 在 resources 前；id 两套编号经父
+        // object components 关联——leafParts 表承载）。
+        const bambu = parseBambu3mfFromEntries(archive.extraEntries, archive.modelXml);
+        const parts = archive.objects.map(threemfObjectToShape);
+        const multiPartCount = parts.length > 1 ? parts.length : undefined;
+        const importModel = {
+            format: '3mf',
+            unit: archive.unit,
+            parts: archive.objects.map((obj, i) => {
+                const part = {
+                    index: i,
+                    name: obj.name ?? `imported:${i}`,
+                };
+                if (obj.baseColor)
+                    part.color = [obj.baseColor[0], obj.baseColor[1], obj.baseColor[2]];
+                if (obj.meta)
+                    part.meta = obj.meta;
+                // Bambu 身份：3MF `<object id>`（叶子实例）与 Bambu objects 表（键为
+                // model_settings 父对象 id）是两套编号——经父 object components 关联
+                // （ThreemfObject.parentObjectId/componentIndex → bambu.leafParts）。
+                const bm = obj.parentObjectId !== undefined
+                    ? bambu.leafParts.get(`${obj.parentObjectId}:${obj.componentIndex ?? 1}`)
+                    : undefined;
+                if (bm) {
+                    part.objectId = bm.objectId;
+                    if (bm.plateId > 0)
+                        part.plateId = bm.plateId;
+                    // Bambu extruder 1-based（默认 1）：显式登记文件声明值
+                    part.extruder = bm.extruder;
+                    part.partId = bm.partId;
                 }
-                : {}),
-            // 零件级元数据（方案 §5.1 3MF 行）：对象 name/partnumber/metadatagroup → meta。
-            ...(first.meta ? { meta: first.meta } : {}),
+                return part;
+            }),
+            ...(archive.fileMeta ? { fileMeta: archive.fileMeta } : {}),
         };
+        const bambuViews = buildBambuViews(bambu);
+        if (bambuViews)
+            importModel.bambuViews = bambuViews;
+        // 装配层级重建（方案 §2.1 / 第 5 步）：含 `<components>` 时还原 CompoundShape，
+        // 叶节点携带相对父 transform；单零件平铺导入不挂载。
+        const assembly = archive.hierarchy && archive.localGeomById
+            ? buildAssemblyFromArchive(archive.hierarchy, archive.localGeomById)
+            : undefined;
         return {
-            shape,
+            shape: parts[0],
+            parts,
             unit: archive.unit,
             multiPartCount,
+            importModel,
             // 整体级元数据（`<model><metadata>`）随导入结果上抛（方案 §5.1）。
             ...(archive.fileMeta ? { fileMeta: archive.fileMeta } : {}),
+            ...(assembly ? { assembly } : {}),
         };
     }
     if (fmt === 'stl') {
-        const scale = (opts?.unit ?? mm).as(mm);
         const geo = parseStl(buffer);
+        // STL 无单位声明：opts.unit 显式声明优先；未声明时做启发式猜测
+        // （guessStlUnit —— 历史 host 行为，unified §6.1/§8 迁移基线）。猜测与
+        // 折算都在 faijs 内完成（红线 R0），G0 即基准值，宿主不再二次换算。
+        // unit 字段回传源单位（声明值或猜测值），供宿主记录 sourceUnit 元数据。
+        let scale = 1;
+        let sourceUnit = 'mm';
+        const declared = opts?.unit;
+        if (declared) {
+            sourceUnit = declared;
+            scale = unitScale(declared);
+        }
+        else {
+            geo.computeBoundingBox();
+            const bb = geo.boundingBox;
+            if (bb) {
+                sourceUnit = guessStlUnit({
+                    min: [bb.min.x, bb.min.y, bb.min.z],
+                    max: [bb.max.x, bb.max.y, bb.max.z],
+                });
+                scale = unitScale(sourceUnit);
+            }
+        }
         if (scale !== 1) {
             const attr = geo.getAttribute('position');
             const arr = attr.array;
             for (let i = 0; i < arr.length; i++)
                 arr[i] *= scale;
         }
-        return { shape: geoToManifoldMesh(geo), unit: null };
+        const shape = geoToManifoldMesh(geo);
+        return { shape, parts: [shape], unit: sourceUnit };
     }
     // STEP goes through the BREP chain (loadBrep → OCCT, which normalizes to the
     // base unit on read). The mesh io path has no kernel-independent STEP parser
     // and must not fake one — a missing path is an error, not a fallback.
     throw new Error(`[mesh/io] unsupported format: ${fmt}`);
 }
+/** 单个 3MF `<build><item>` 对象 → Shape（P0：逐对象构造，替换原"只取第一个"收敛）。 */
+function threemfObjectToShape(obj) {
+    return {
+        positions: obj.positions,
+        indices: obj.indices,
+        // P2（方案 §5 3MF 行）：对象级 baseColor → appearance.color（sRGB 原值，
+        // 宽容兼容：无 baseColor 不带 appearance）。colorgroup（vertexColors）与
+        // 逐三角形材质属 Phase 2（materialGroups / vertexColors），P2 不映射。
+        ...(obj.baseColor ? { appearance: { color: [obj.baseColor[0], obj.baseColor[1], obj.baseColor[2]] } } : {}),
+        // P4（方案 §5 3MF 行）：逐三角形 basematerials（p1=p2=p3）→ materialGroups
+        // （三角形区间 + appearance.color）；无则不带。vertexColors（colorgroup）
+        // 由上层（编辑器导入路径）消费，io 单零件收敛不展开为材质分组。
+        ...(obj.materialGroups && obj.materialGroups.length > 0
+            ? {
+                materialGroups: obj.materialGroups.map((g) => ({
+                    start: g.start,
+                    count: g.count,
+                    appearance: { color: [g.color[0], g.color[1], g.color[2]] },
+                })),
+            }
+            : {}),
+        // 零件级元数据（方案 §5.1 3MF 行）：对象 name/partnumber/metadatagroup → meta。
+        ...(obj.meta ? { meta: obj.meta } : {}),
+    };
+}
+/**
+ * 由 3MF 装配层级重建 `CompoundShape`（方案 §2.1 / 第 5 步「导入归一」）。
+ *
+ * 见 `ThreemfArchive.hierarchy` / `localGeomById`：节点带**相对父**位姿（行主序 3×4，
+ * 平移在末列，与写出器 `transformToMatrix12` 同源）；几何来自 `localGeomById` 的**未烘焙**
+ * 局部网格。叶节点的最终 `Shape.transform` 即该相对位姿（写回 `Shape.transform`，供
+ * 后续导出按 3MF `<component transform>` 原样还原——D1 往返）。容器节点落为
+ * `CompoundShape`（不含 `transform` / `meta`，与 `shape.ts` 的 `CompoundShape` 形态一致）。
+ *
+ * 注：`shape.ts` 的 `CompoundShape.children` 当前声明为 `Shape[]`（非递归），故嵌套装配
+ * 在类型层面暂不表达；运行时子节点可为子 `CompoundShape`（由 `isCompoundLike` 结构判定消费）。
+ * 把 `CompoundShape` 改为递归类型是独立的后续重构（会波及 faijs-extra / cad-runtime），本步
+ * 以最小改动桥接——见下方 `children` 处的收窄断言。
+ *
+ * 仅在存在真实装配（多 item 或任一 item 带 components）时返回非空；单零件平铺导入返回
+ * `undefined`（由调用方决定是否挂载到 `result.assembly`，避免改变单零件结果形状）。
+ */
+function buildAssemblyFromArchive(hierarchy, localGeomById) {
+    const hasHierarchy = hierarchy.length > 1 || hierarchy.some((n) => (n.children?.length ?? 0) > 0);
+    if (!hasHierarchy)
+        return undefined;
+    const buildNode = (node) => {
+        const obj = localGeomById.get(node.objectId);
+        if (node.children && node.children.length > 0) {
+            // 收窄断言：共享 CompoundShape 非递归声明，运行时子节点可含子 CompoundShape。
+            return { kind: 'compound', children: node.children.map(buildNode) };
+        }
+        // 叶节点：局部几何 + 相对父位姿。
+        if (!obj || !obj.positions || !obj.indices) {
+            return { kind: 'compound', children: [] };
+        }
+        const leaf = threemfObjectToShape(obj);
+        if (node.transform) {
+            ;
+            leaf.transform = { matrix: Array.from(node.transform) };
+        }
+        return leaf;
+    };
+    return hierarchy.length === 1
+        ? buildNode(hierarchy[0])
+        : { kind: 'compound', children: hierarchy.map(buildNode) };
+}
+/** Bambu 显示视图数据 → ImportModel.bambuViews（无任何 Bambu 结构时省略）。 */
+function buildBambuViews(bambu) {
+    const plates = [...bambu.plates.keys()].sort((a, b) => a - b);
+    if (plates.length === 0 && !bambu.assembleTransforms && !bambu.importTransforms)
+        return undefined;
+    const views = { plates };
+    if (bambu.assembleTransforms) {
+        views.assembleTransforms = Object.fromEntries([...bambu.assembleTransforms].map(([k, v]) => [k, { transform: v.transform, offset: v.offset }]));
+    }
+    if (bambu.importTransforms) {
+        views.importTransforms = Object.fromEntries([...bambu.importTransforms].map(([k, v]) => [k, { matrix: v.matrix, sourceOffset: v.sourceOffset }]));
+    }
+    // P4：完整消费面随结果回传——宿主重建 Bambu3mfMetadata 不再回读 archive。
+    if (bambu.buildItems) {
+        views.buildItems = bambu.buildItems.map((b) => ({
+            objectId: b.objectId,
+            transform: b.transform ?? null,
+        }));
+    }
+    if (bambu.filamentColors.length > 0)
+        views.filamentColors = bambu.filamentColors;
+    if (bambu.filamentTypes.length > 0)
+        views.filamentTypes = bambu.filamentTypes;
+    if (bambu.parts.length > 0) {
+        views.parts = bambu.parts.map((p) => ({
+            partIndex: p.partIndex,
+            objectId: p.objectId,
+            partId: p.partId,
+            name: p.name,
+            extruder: p.extruder,
+            plateId: p.plateId,
+        }));
+    }
+    return views;
+}
 //# sourceMappingURL=io.js.map

package/dist/mesh/io.js.map

@@ -1 +1 @@
-{"version":3,"file":"io.js","sourceRoot":"","sources":["../../src/mesh/io.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;GAgBG;AAGH,OAAO,EAAE,iBAAiB,EAAE,MAAM,wBAAwB,CAAA;AAC1D,OAAO,EAAE,QAAQ,EAAE,MAAM,cAAc,CAAA;AACvC,OAAO,EAAE,YAAY,EAAE,MAAM,kBAAkB,CAAA;AAC/C,OAAO,EAAE,EAAE,EAAsC,MAAM,UAAU,CAAA;AA2BjE,gFAAgF;AAChF,MAAM,iBAAiB,GAA6B;IAClD,SAAS,EAAE,IAAI;IACf,SAAS,EAAE,IAAI;IACf,GAAG,EAAE,GAAG;CACT,CAAA;AAED,+EAA+E;AAC/E,MAAM,uBAAuB,GAA6B;IACxD,OAAO,EAAE,GAAG;IACZ,OAAO,EAAE,GAAG;IACZ,YAAY,EAAE,IAAI;IAClB,YAAY,EAAE,IAAI;IAClB,YAAY,EAAE,IAAI;IAClB,YAAY,EAAE,IAAI;IAClB,YAAY,EAAE,QAAQ;IACtB,YAAY,EAAE,QAAQ;IACtB,MAAM,EAAE,MAAM;IACd,MAAM,EAAE,MAAM;CACf,CAAA;AAED;;;;;GAKG;AACH,MAAM,CAAC,MAAM,qBAAqB,GAAG,GAAG,GAAG,IAAI,CAAA;AAE/C;;;;;;;;;;;;;;;;;;GAkBG;AACH,MAAM,UAAU,cAAc,CAAC,QAAgB;IAC7C,MAAM,IAAI,GAAG,QAAQ,CAAC,KAAK,CAAC,CAAC,EAAE,qBAAqB,CAAC,CAAA;IAErD,uEAAuE;IACvE,MAAM,IAAI,GAAG,IAAI,CAAC,KAAK,CAAC,yCAAyC,CAAC,CAAA;IAClE,IAAI,IAAI,EAAE,CAAC;QACT,MAAM,MAAM,GAAG,uBAAuB,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,WAAW,EAAE,CAAC,CAAA;QAC7D,IAAI,MAAM;YAAE,OAAO,MAAM,CAAA;IAC3B,CAAC;IAED,4EAA4E;IAC5E,uDAAuD;IACvD,MAAM,EAAE,GAAG,IAAI,CAAC,KAAK,CAAC,+CAA+C,CAAC,CAAA;IACtE,IAAI,EAAE,EAAE,CAAC;QACP,MAAM,MAAM,GAAG,EAAE,CAAC,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC,WAAW,EAAE,CAAA;QACzC,IAAI,MAAM,KAAK,SAAS;YAAE,OAAO,QAAQ,CAAA;QACzC,MAAM,MAAM,GAAG,iBAAiB,CAAC,MAAM,CAAC,CAAA;QACxC,IAAI,MAAM;YAAE,OAAO,MAAM,CAAA;IAC3B,CAAC;IAED,OAAO,IAAI,CAAA;AACb,CAAC;AAED;;;;;;;;;;;GAWG;AACH,MAAM,CAAC,KAAK,UAAU,UAAU,CAC9B,MAAmB,EACnB,MAAe,EACf,IAAgC;IAEhC,MAAM,GAAG,GAAG,CAAC,MAAM,IAAI,KAAK,CAAC,CAAC,WAAW,EAAE,CAAA;IAE3C,IAAI,GAAG,KAAK,KAAK,IAAI,GAAG,KAAK,SAAS,EAAE,CAAC;QACvC,MAAM,OAAO,GAAG,MAAM,YAAY,CAAC,MAAM,CAAC,CAAA;QAC1C,+DAA+D;QAC/D,0DAA0D;QAC1D,iDAAiD;QACjD,MAAM,KAAK,GAAG,OAAO,CAAC,OAAO,CAAC,CAAC,CAAC,CAAA;QAChC,IAAI,CAAC,KAAK,EAAE,CAAC;YACX,MAAM,IAAI,KAAK,CAAC,mCAAmC,CAAC,CAAA;QACtD,CAAC;QACD,MAAM,cAAc,GAAG,OAAO,CAAC,OAAO,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC,CAAC,OAAO,CAAC,OAAO,CAAC,MAAM,CAAC,CAAC,CAAC,SAAS,CAAA;QACtF,MAAM,KAAK,GAAU;YACnB,SAAS,EAAE,KAAK,CAAC,SAAyB;YAC1C,OAAO,EAAE,KAAK,CAAC,OAAsB;YACrC,4DAA4D;YAC5D,4DAA4D;YAC5D,yDAAyD;YACzD,GAAG,CAAC,KAAK,CAAC,SAAS,CAAC,CAAC,CAAC,EAAE,UAAU,EAAE,EAAE,KAAK,EAAE,CAAC,KAAK,CAAC,SAAS,CAAC,CAAC,CAAC,EAAE,KAAK,CAAC,SAAS,CAAC,CAAC,CAAC,EAAE,KAAK,CAAC,SAAS,CAAC,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC;YACnH,+DAA+D;YAC/D,2DAA2D;YAC3D,mCAAmC;YACnC,GAAG,CAAC,KAAK,CAAC,cAAc,IAAI,KAAK,CAAC,cAAc,CAAC,MAAM,GAAG,CAAC;gBACzD,CAAC,CAAC;oBACE,cAAc,EAAE,KAAK,CAAC,cAAc,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC;wBAC/C,KAAK,EAAE,CAAC,CAAC,KAAK;wBACd,KAAK,EAAE,CAAC,CAAC,KAAK;wBACd,UAAU,EAAE,EAAE,KAAK,EAAE,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,EAAmB;qBAC7E,CAAC,CAAC;iBACJ;gBACH,CAAC,CAAC,EAAE,CAAC;YACP,iEAAiE;YACjE,GAAG,CAAC,KAAK,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,IAAI,EAAE,KAAK,CAAC,IAAI,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC;SAC5C,CAAA;QACD,OAAO;YACL,KAAK;YACL,IAAI,EAAE,OAAO,CAAC,IAAI;YAClB,cAAc;YACd,+CAA+C;YAC/C,GAAG,CAAC,OAAO,CAAC,QAAQ,CAAC,CAAC,CAAC,EAAE,QAAQ,EAAE,OAAO,CAAC,QAAQ,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC;SAC5D,CAAA;IACH,CAAC;IAED,IAAI,GAAG,KAAK,KAAK,EAAE,CAAC;QAClB,MAAM,KAAK,GAAG,CAAC,IAAI,EAAE,IAAI,IAAI,EAAE,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAA;QACvC,MAAM,GAAG,GAAG,QAAQ,CAAC,MAAM,CAAC,CAAA;QAC5B,IAAI,KAAK,KAAK,CAAC,EAAE,CAAC;YAChB,MAAM,IAAI,GAAG,GAAG,CAAC,YAAY,CAAC,UAAU,CAA0B,CAAA;YAClE,MAAM,GAAG,GAAG,IAAI,CAAC,KAAqB,CAAA;YACtC,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,GAAG,CAAC,MAAM,EAAE,CAAC,EAAE;gBAAE,GAAG,CAAC,CAAC,CAAC,IAAI,KAAK,CAAA;QACtD,CAAC;QACD,OAAO,EAAE,KAAK,EAAE,iBAAiB,CAAC,GAAG,CAAC,EAAE,IAAI,EAAE,IAAI,EAAE,CAAA;IACtD,CAAC;IAED,6EAA6E;IAC7E,6EAA6E;IAC7E,sEAAsE;IACtE,MAAM,IAAI,KAAK,CAAC,iCAAiC,GAAG,EAAE,CAAC,CAAA;AACzD,CAAC","sourcesContent":["/**\n * mesh IO API — headless 文件加载\n *\n * STL 由 core 自持的 `mesh/stl-loader.ts` 解析（零 three addons）；3MF 由\n * `mesh/threemf-loader.ts` 解析（ZIP 解压 + XML，单位换算到 mm 基准）。\n * 坐标永远以 faijs 基准长度单位（mm）存储 — Shape 不贴 unit 标签（D3）。\n *\n * 单位换算边界（unit-system §5.2）：\n * - STL 无单位元数据 → 由 `opts.unit` 显式声明，缺省 mm，不做启发式猜测。\n * - 3MF `<model unit>` 由解析器读取并换算（micron/mm/cm/inch/foot/meter）。\n *\n * 返回契约（unit-system §10.6）：`importFile` 返回 `{ shape, unit }` — `unit`\n * 是文件**自己声明的单位**（3MF `<model unit>`、STEP 单位实体），无声明格式\n * （STL）为 null（此时 `opts.unit` 决定刻度）。坐标恒为基准值 — `unit` 只作\n * 元数据（sourceUnit 记录、导出目标判定），绝不参与几何缩放（读入折算已由\n * 内核/解析器完成，二次缩放 = 双重换算）。\n */\n\nimport * as THREE from 'three'\nimport { geoToManifoldMesh } from '../boolean/geo-convert'\nimport { parseStl } from './stl-loader'\nimport { parseThreemf } from './threemf-loader'\nimport { mm, type UnitName, type ValueWithUnits } from '../units'\nimport type { Shape } from './types'\nimport type { PbrAppearance } from '../api/appearance'\nimport type { FileMeta } from '../api/meta'\n\n/** Result of a unit-aware file import. */\nexport interface ImportFileResult {\n  shape: Shape\n  /**\n   * The unit the file itself declares (3MF `<model unit>`, STEP unit entities).\n   * null for declaration-less formats (STL) — the caller's opts.unit decided.\n   */\n  unit: UnitName | null\n  /**\n   * Total parts the single file declared (e.g. 3MF `<build>` object count),\n   * present only when > 1. Single-part mesh (STL, single-object 3MF) omits it.\n   * When set, `shape` is only the FIRST part's geometry (feijs `load` op is\n   * single-part; the file was downgraded to its first part — §5.4).\n   */\n  multiPartCount?: number\n  /**\n   * 整体级元数据（文件级；方案 §5.1 3MF `<model><metadata>`）。STL/STEP 视实现\n   * 是否解析；无声明则省略。仅随导入结果上抛，不挂 Shape。\n   */\n  fileMeta?: FileMeta\n}\n\n/** SI prefixes that may precede .METRE. in a STEP SI_UNIT, → faijs UnitName. */\nconst SI_PREFIX_TO_UNIT: Record<string, UnitName> = {\n  '.MILLI.': 'mm',\n  '.CENTI.': 'cm',\n  '$': 'm',\n}\n\n/** CONVERSION_BASED_UNIT names (uppercased) found in real-world STEP files. */\nconst CONVERSION_NAME_TO_UNIT: Record<string, UnitName> = {\n  'METRE': 'm',\n  'METER': 'm',\n  'MILLIMETRE': 'mm',\n  'MILLIMETER': 'mm',\n  'CENTIMETRE': 'cm',\n  'CENTIMETER': 'cm',\n  'MICROMETRE': 'micron',\n  'MICROMETER': 'micron',\n  'INCH': 'inch',\n  'FOOT': 'foot',\n}\n\n/**\n * Bounded scan window for `detectStepUnit`. Unit entities sit at the front of\n * the DATA section (right after the product/context blocks); 256 KiB covers\n * every real-world header+context preamble observed so far. Recomputable\n * constant — raise if a fixture ever misses.\n */\nexport const STEP_UNIT_SCAN_PREFIX = 256 * 1024\n\n/**\n * Parse the declared length unit from STEP text (unit-system §10.4).\n *\n * Unit entities live in the DATA section (not HEADER — ISO 10303-21 reserves\n * HEADER for FILE_DESCRIPTION/FILE_NAME/FILE_SCHEMA), near its start. We scan\n * a bounded prefix; the justification is \"unit entities sit at the front of\n * the DATA section\", not \"top of file\".\n *\n * Recognized forms, both attached to a LENGTH_UNIT():\n * - `SI_UNIT(<prefix>, .METRE.)` — prefix `.MILLI.`/`.CENTI.`/`.MICRO.` or `$`.\n * - `CONVERSION_BASED_UNIT('<NAME>', #n)` — inch/foot/etc.\n *\n * Metadata only — NEVER used to scale geometry (OCCT already normalizes on\n * read; re-scaling = double conversion).\n *\n * @param stepText - the full STEP file text to scan (only a bounded prefix is read).\n * @returns the faijs UnitName, or null when no length-unit declaration is found\n *   (STEP permits omitting it; caller falls back to the base unit).\n */\nexport function detectStepUnit(stepText: string): UnitName | null {\n  const head = stepText.slice(0, STEP_UNIT_SCAN_PREFIX)\n\n  // 1) CONVERSION_BASED_UNIT('<NAME>', #n) — non-SI units (inch/foot/…).\n  const conv = head.match(/CONVERSION_BASED_UNIT\\s*\\(\\s*'([^']+)'/i)\n  if (conv) {\n    const mapped = CONVERSION_NAME_TO_UNIT[conv[1].toUpperCase()]\n    if (mapped) return mapped\n  }\n\n  // 2) SI_UNIT(<prefix>, .METRE.) — the .METRE. guard excludes angle entities\n  //    (they carry .RADIAN./.STERADIAN., never .METRE.).\n  const si = head.match(/SI_UNIT\\s*\\(\\s*([^)]*?)\\s*,\\s*\\.METRE\\.\\s*\\)/i)\n  if (si) {\n    const prefix = si[1].trim().toUpperCase()\n    if (prefix === '.MICRO.') return 'micron'\n    const mapped = SI_PREFIX_TO_UNIT[prefix]\n    if (mapped) return mapped\n  }\n\n  return null\n}\n\n/**\n * Load geometry from raw file bytes (headless variant).\n *\n * @param buffer - the raw file bytes to parse (already decompressed; stpz\n *   unzipping is the caller's job — faijs never unzips implicitly).\n * @param format - format identifier such as 'stl', '3mf'/'threemf' or 'step'\n *   (defaults to 'stl').\n * @param opts - optional settings; `unit` declares the source unit for\n *   formats without unit metadata (e.g. STL). Defaults to mm.\n * @returns the shape with base-unit coordinates plus the file's own declared\n *   unit (`unit`, metadata only; null when the format has no declaration).\n */\nexport async function importFile(\n  buffer: ArrayBuffer,\n  format?: string,\n  opts?: { unit?: ValueWithUnits },\n): Promise<ImportFileResult> {\n  const fmt = (format ?? 'stl').toLowerCase()\n\n  if (fmt === '3mf' || fmt === 'threemf') {\n    const archive = await parseThreemf(buffer)\n    // §5.4 单零件收敛：只取**第一个**对象实例（declaration order — `<build><item>`\n    // 序，见 threemf-loader）构造成单一 part；多对象文件记 multiPartCount 供上层\n    // 登记\"多零件降级\"警告。坐标已在 parseThreemf 里折算为 faijs 基准单位。\n    const first = archive.objects[0]\n    if (!first) {\n      throw new Error('[mesh/io] 3MF contains no objects')\n    }\n    const multiPartCount = archive.objects.length > 1 ? archive.objects.length : undefined\n    const shape: Shape = {\n      positions: first.positions as Float32Array,\n      indices: first.indices as Uint32Array,\n      // P2（方案 §5 3MF 行）：对象级 baseColor → appearance.color（sRGB 原值，\n      // 宽容兼容：无 baseColor 不带 appearance）。colorgroup（vertexColors）与\n      // 逐三角形材质属 Phase 2（materialGroups / vertexColors），P2 不映射。\n      ...(first.baseColor ? { appearance: { color: [first.baseColor[0], first.baseColor[1], first.baseColor[2]] } } : {}),\n      // P4（方案 §5 3MF 行）：逐三角形 basematerials（p1=p2=p3）→ materialGroups\n      // （三角形区间 + appearance.color）；无则不带。vertexColors（colorgroup）\n      // 由上层（编辑器导入路径）消费，io 单零件收敛不展开为材质分组。\n      ...(first.materialGroups && first.materialGroups.length > 0\n        ? {\n            materialGroups: first.materialGroups.map((g) => ({\n              start: g.start,\n              count: g.count,\n              appearance: { color: [g.color[0], g.color[1], g.color[2]] } as PbrAppearance,\n            })),\n          }\n        : {}),\n      // 零件级元数据（方案 §5.1 3MF 行）：对象 name/partnumber/metadatagroup → meta。\n      ...(first.meta ? { meta: first.meta } : {}),\n    }\n    return {\n      shape,\n      unit: archive.unit,\n      multiPartCount,\n      // 整体级元数据（`<model><metadata>`）随导入结果上抛（方案 §5.1）。\n      ...(archive.fileMeta ? { fileMeta: archive.fileMeta } : {}),\n    }\n  }\n\n  if (fmt === 'stl') {\n    const scale = (opts?.unit ?? mm).as(mm)\n    const geo = parseStl(buffer)\n    if (scale !== 1) {\n      const attr = geo.getAttribute('position') as THREE.BufferAttribute\n      const arr = attr.array as Float32Array\n      for (let i = 0; i < arr.length; i++) arr[i] *= scale\n    }\n    return { shape: geoToManifoldMesh(geo), unit: null }\n  }\n\n  // STEP goes through the BREP chain (loadBrep → OCCT, which normalizes to the\n  // base unit on read). The mesh io path has no kernel-independent STEP parser\n  // and must not fake one — a missing path is an error, not a fallback.\n  throw new Error(`[mesh/io] unsupported format: ${fmt}`)\n}\n"]}
+{"version":3,"file":"io.js","sourceRoot":"","sources":["../../src/mesh/io.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;GA2BG;AAGH,OAAO,EAAE,iBAAiB,EAAE,MAAM,wBAAwB,CAAA;AAC1D,OAAO,EAAE,QAAQ,EAAE,MAAM,cAAc,CAAA;AACvC,OAAO,EAAE,YAAY,EAAwC,MAAM,kBAAkB,CAAA;AACrF,OAAO,EAAE,wBAAwB,EAAE,MAAM,iBAAiB,CAAA;AAC1D,OAAO,EAAE,SAAS,EAAiB,MAAM,UAAU,CAAA;AACnD,OAAO,EAAE,YAAY,EAAE,MAAM,YAAY,CAAA;AAoDzC,gFAAgF;AAChF,MAAM,iBAAiB,GAA6B;IAClD,SAAS,EAAE,IAAI;IACf,SAAS,EAAE,IAAI;IACf,GAAG,EAAE,GAAG;CACT,CAAA;AAED,+EAA+E;AAC/E,MAAM,uBAAuB,GAA6B;IACxD,OAAO,EAAE,GAAG;IACZ,OAAO,EAAE,GAAG;IACZ,YAAY,EAAE,IAAI;IAClB,YAAY,EAAE,IAAI;IAClB,YAAY,EAAE,IAAI;IAClB,YAAY,EAAE,IAAI;IAClB,YAAY,EAAE,QAAQ;IACtB,YAAY,EAAE,QAAQ;IACtB,MAAM,EAAE,MAAM;IACd,MAAM,EAAE,MAAM;CACf,CAAA;AAED;;;;;GAKG;AACH,MAAM,CAAC,MAAM,qBAAqB,GAAG,GAAG,GAAG,IAAI,CAAA;AAE/C;;;;;;;;;;;;;;;;;;GAkBG;AACH,MAAM,UAAU,cAAc,CAAC,QAAgB;IAC7C,MAAM,IAAI,GAAG,QAAQ,CAAC,KAAK,CAAC,CAAC,EAAE,qBAAqB,CAAC,CAAA;IAErD,uEAAuE;IACvE,MAAM,IAAI,GAAG,IAAI,CAAC,KAAK,CAAC,yCAAyC,CAAC,CAAA;IAClE,IAAI,IAAI,EAAE,CAAC;QACT,MAAM,MAAM,GAAG,uBAAuB,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,WAAW,EAAE,CAAC,CAAA;QAC7D,IAAI,MAAM;YAAE,OAAO,MAAM,CAAA;IAC3B,CAAC;IAED,4EAA4E;IAC5E,uDAAuD;IACvD,MAAM,EAAE,GAAG,IAAI,CAAC,KAAK,CAAC,+CAA+C,CAAC,CAAA;IACtE,IAAI,EAAE,EAAE,CAAC;QACP,MAAM,MAAM,GAAG,EAAE,CAAC,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC,WAAW,EAAE,CAAA;QACzC,IAAI,MAAM,KAAK,SAAS;YAAE,OAAO,QAAQ,CAAA;QACzC,MAAM,MAAM,GAAG,iBAAiB,CAAC,MAAM,CAAC,CAAA;QACxC,IAAI,MAAM;YAAE,OAAO,MAAM,CAAA;IAC3B,CAAC;IAED,OAAO,IAAI,CAAA;AACb,CAAC;AAED;;;;;;;;;;;;;;;;;;;;GAoBG;AACH,MAAM,CAAC,KAAK,UAAU,UAAU,CAC9B,MAAmB,EACnB,MAAe,EACf,IAA0B;IAE1B,MAAM,GAAG,GAAG,CAAC,MAAM,IAAI,KAAK,CAAC,CAAC,WAAW,EAAE,CAAA;IAE3C,IAAI,GAAG,KAAK,KAAK,IAAI,GAAG,KAAK,SAAS,EAAE,CAAC;QACvC,MAAM,OAAO,GAAG,MAAM,YAAY,CAAC,MAAM,EAAE,IAAI,CAAC,CAAA;QAChD,+DAA+D;QAC/D,0DAA0D;QAC1D,eAAe;QACf,IAAI,OAAO,CAAC,OAAO,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;YACjC,MAAM,IAAI,KAAK,CAAC,mCAAmC,CAAC,CAAA;QACtD,CAAC;QACD,sDAAsD;QACtD,0DAA0D;QAC1D,wCAAwC;QACxC,MAAM,KAAK,GAAG,wBAAwB,CAAC,OAAO,CAAC,YAAY,EAAE,OAAO,CAAC,QAAQ,CAAC,CAAA;QAC9E,MAAM,KAAK,GAAG,OAAO,CAAC,OAAO,CAAC,GAAG,CAAC,oBAAoB,CAAC,CAAA;QACvD,MAAM,cAAc,GAAG,KAAK,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC,CAAC,SAAS,CAAA;QAClE,MAAM,WAAW,GAAgB;YAC/B,MAAM,EAAE,KAAK;YACb,IAAI,EAAE,OAAO,CAAC,IAAI;YAClB,KAAK,EAAE,OAAO,CAAC,OAAO,CAAC,GAAG,CAAC,CAAC,GAAG,EAAE,CAAC,EAAE,EAAE;gBACpC,MAAM,IAAI,GAAiC;oBACzC,KAAK,EAAE,CAAC;oBACR,IAAI,EAAE,GAAG,CAAC,IAAI,IAAI,YAAY,CAAC,EAAE;iBAClC,CAAA;gBACD,IAAI,GAAG,CAAC,SAAS;oBAAE,IAAI,CAAC,KAAK,GAAG,CAAC,GAAG,CAAC,SAAS,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,SAAS,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,SAAS,CAAC,CAAC,CAAC,CAAC,CAAA;gBACtF,IAAI,GAAG,CAAC,IAAI;oBAAE,IAAI,CAAC,IAAI,GAAG,GAAG,CAAC,IAAI,CAAA;gBAClC,uDAAuD;gBACvD,uDAAuD;gBACvD,mEAAmE;gBACnE,MAAM,EAAE,GAAG,GAAG,CAAC,cAAc,KAAK,SAAS;oBACzC,CAAC,CAAC,KAAK,CAAC,SAAS,CAAC,GAAG,CAAC,GAAG,GAAG,CAAC,cAAc,IAAI,GAAG,CAAC,cAAc,IAAI,CAAC,EAAE,CAAC;oBACzE,CAAC,CAAC,SAAS,CAAA;gBACb,IAAI,EAAE,EAAE,CAAC;oBACP,IAAI,CAAC,QAAQ,GAAG,EAAE,CAAC,QAAQ,CAAA;oBAC3B,IAAI,EAAE,CAAC,OAAO,GAAG,CAAC;wBAAE,IAAI,CAAC,OAAO,GAAG,EAAE,CAAC,OAAO,CAAA;oBAC7C,yCAAyC;oBACzC,IAAI,CAAC,QAAQ,GAAG,EAAE,CAAC,QAAQ,CAAA;oBAC3B,IAAI,CAAC,MAAM,GAAG,EAAE,CAAC,MAAM,CAAA;gBACzB,CAAC;gBACD,OAAO,IAAI,CAAA;YACb,CAAC,CAAC;YACF,GAAG,CAAC,OAAO,CAAC,QAAQ,CAAC,CAAC,CAAC,EAAE,QAAQ,EAAE,OAAO,CAAC,QAAQ,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC;SAC5D,CAAA;QACD,MAAM,UAAU,GAAG,eAAe,CAAC,KAAK,CAAC,CAAA;QACzC,IAAI,UAAU;YAAE,WAAW,CAAC,UAAU,GAAG,UAAU,CAAA;QACnD,8DAA8D;QAC9D,iCAAiC;QACjC,MAAM,QAAQ,GAAG,OAAO,CAAC,SAAS,IAAI,OAAO,CAAC,aAAa;YACzD,CAAC,CAAC,wBAAwB,CAAC,OAAO,CAAC,SAAS,EAAE,OAAO,CAAC,aAAa,CAAC;YACpE,CAAC,CAAC,SAAS,CAAA;QACb,OAAO;YACL,KAAK,EAAE,KAAK,CAAC,CAAC,CAAC;YACf,KAAK;YACL,IAAI,EAAE,OAAO,CAAC,IAAI;YAClB,cAAc;YACd,WAAW;YACX,+CAA+C;YAC/C,GAAG,CAAC,OAAO,CAAC,QAAQ,CAAC,CAAC,CAAC,EAAE,QAAQ,EAAE,OAAO,CAAC,QAAQ,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC;YAC3D,GAAG,CAAC,QAAQ,CAAC,CAAC,CAAC,EAAE,QAAQ,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC;SAClC,CAAA;IACH,CAAC;IAED,IAAI,GAAG,KAAK,KAAK,EAAE,CAAC;QAClB,MAAM,GAAG,GAAG,QAAQ,CAAC,MAAM,CAAC,CAAA;QAC5B,wCAAwC;QACxC,wDAAwD;QACxD,0CAA0C;QAC1C,8CAA8C;QAC9C,IAAI,KAAK,GAAG,CAAC,CAAA;QACb,IAAI,UAAU,GAAa,IAAI,CAAA;QAC/B,MAAM,QAAQ,GAAG,IAAI,EAAE,IAAI,CAAA;QAC3B,IAAI,QAAQ,EAAE,CAAC;YACb,UAAU,GAAG,QAAQ,CAAA;YACrB,KAAK,GAAG,SAAS,CAAC,QAAQ,CAAC,CAAA;QAC7B,CAAC;aAAM,CAAC;YACN,GAAG,CAAC,kBAAkB,EAAE,CAAA;YACxB,MAAM,EAAE,GAAG,GAAG,CAAC,WAAW,CAAA;YAC1B,IAAI,EAAE,EAAE,CAAC;gBACP,UAAU,GAAG,YAAY,CAAC;oBACxB,GAAG,EAAE,CAAC,EAAE,CAAC,GAAG,CAAC,CAAC,EAAE,EAAE,CAAC,GAAG,CAAC,CAAC,EAAE,EAAE,CAAC,GAAG,CAAC,CAAC,CAAC;oBACnC,GAAG,EAAE,CAAC,EAAE,CAAC,GAAG,CAAC,CAAC,EAAE,EAAE,CAAC,GAAG,CAAC,CAAC,EAAE,EAAE,CAAC,GAAG,CAAC,CAAC,CAAC;iBACpC,CAAC,CAAA;gBACF,KAAK,GAAG,SAAS,CAAC,UAAU,CAAC,CAAA;YAC/B,CAAC;QACH,CAAC;QACD,IAAI,KAAK,KAAK,CAAC,EAAE,CAAC;YAChB,MAAM,IAAI,GAAG,GAAG,CAAC,YAAY,CAAC,UAAU,CAA0B,CAAA;YAClE,MAAM,GAAG,GAAG,IAAI,CAAC,KAAqB,CAAA;YACtC,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,GAAG,CAAC,MAAM,EAAE,CAAC,EAAE;gBAAE,GAAG,CAAC,CAAC,CAAC,IAAI,KAAK,CAAA;QACtD,CAAC;QACD,MAAM,KAAK,GAAG,iBAAiB,CAAC,GAAG,CAAC,CAAA;QACpC,OAAO,EAAE,KAAK,EAAE,KAAK,EAAE,CAAC,KAAK,CAAC,EAAE,IAAI,EAAE,UAAU,EAAE,CAAA;IACpD,CAAC;IAED,6EAA6E;IAC7E,6EAA6E;IAC7E,sEAAsE;IACtE,MAAM,IAAI,KAAK,CAAC,iCAAiC,GAAG,EAAE,CAAC,CAAA;AACzD,CAAC;AAED,gEAAgE;AAChE,SAAS,oBAAoB,CAAC,GAAkB;IAC9C,OAAO;QACL,SAAS,EAAE,GAAG,CAAC,SAAyB;QACxC,OAAO,EAAE,GAAG,CAAC,OAAsB;QACnC,4DAA4D;QAC5D,4DAA4D;QAC5D,yDAAyD;QACzD,GAAG,CAAC,GAAG,CAAC,SAAS,CAAC,CAAC,CAAC,EAAE,UAAU,EAAE,EAAE,KAAK,EAAE,CAAC,GAAG,CAAC,SAAS,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,SAAS,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,SAAS,CAAC,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC;QAC3G,+DAA+D;QAC/D,2DAA2D;QAC3D,mCAAmC;QACnC,GAAG,CAAC,GAAG,CAAC,cAAc,IAAI,GAAG,CAAC,cAAc,CAAC,MAAM,GAAG,CAAC;YACrD,CAAC,CAAC;gBACE,cAAc,EAAE,GAAG,CAAC,cAAc,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC;oBAC7C,KAAK,EAAE,CAAC,CAAC,KAAK;oBACd,KAAK,EAAE,CAAC,CAAC,KAAK;oBACd,UAAU,EAAE,EAAE,KAAK,EAAE,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,EAAmB;iBAC7E,CAAC,CAAC;aACJ;YACH,CAAC,CAAC,EAAE,CAAC;QACP,iEAAiE;QACjE,GAAG,CAAC,GAAG,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,IAAI,EAAE,GAAG,CAAC,IAAI,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC;KACxC,CAAA;AACH,CAAC;AAED;;;;;;;;;;;;;;;;GAgBG;AACH,SAAS,wBAAwB,CAC/B,SAAwB,EACxB,aAAyC;IAEzC,MAAM,YAAY,GAAG,SAAS,CAAC,MAAM,GAAG,CAAC,IAAI,SAAS,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC,QAAQ,EAAE,MAAM,IAAI,CAAC,CAAC,GAAG,CAAC,CAAC,CAAA;IACjG,IAAI,CAAC,YAAY;QAAE,OAAO,SAAS,CAAA;IAEnC,MAAM,SAAS,GAAG,CAAC,IAAiB,EAAyB,EAAE;QAC7D,MAAM,GAAG,GAAG,aAAa,CAAC,GAAG,CAAC,IAAI,CAAC,QAAQ,CAAC,CAAA;QAC5C,IAAI,IAAI,CAAC,QAAQ,IAAI,IAAI,CAAC,QAAQ,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;YAC9C,uDAAuD;YACvD,OAAO,EAAE,IAAI,EAAE,UAAU,EAAE,QAAQ,EAAE,IAAI,CAAC,QAAQ,CAAC,GAAG,CAAC,SAAS,CAAY,EAAE,CAAA;QAChF,CAAC;QACD,oBAAoB;QACpB,IAAI,CAAC,GAAG,IAAI,CAAC,GAAG,CAAC,SAAS,IAAI,CAAC,GAAG,CAAC,OAAO,EAAE,CAAC;YAC3C,OAAO,EAAE,IAAI,EAAE,UAAU,EAAE,QAAQ,EAAE,EAAE,EAAE,CAAA;QAC3C,CAAC;QACD,MAAM,IAAI,GAAG,oBAAoB,CAAC,GAAG,CAAC,CAAA;QACtC,IAAI,IAAI,CAAC,SAAS,EAAE,CAAC;YACnB,CAAC;YAAC,IAAwC,CAAC,SAAS,GAAG,EAAE,MAAM,EAAE,KAAK,CAAC,IAAI,CAAC,IAAI,CAAC,SAAS,CAAC,EAAE,CAAA;QAC/F,CAAC;QACD,OAAO,IAAI,CAAA;IACb,CAAC,CAAA;IAED,OAAO,SAAS,CAAC,MAAM,KAAK,CAAC;QAC3B,CAAC,CAAC,SAAS,CAAC,SAAS,CAAC,CAAC,CAAC,CAAC;QACzB,CAAC,CAAC,EAAE,IAAI,EAAE,UAAU,EAAE,QAAQ,EAAE,SAAS,CAAC,GAAG,CAAC,SAAS,CAAY,EAAE,CAAA;AACzE,CAAC;AAED,8DAA8D;AAC9D,SAAS,eAAe,CACtB,KAAiD;IAEjD,MAAM,MAAM,GAAG,CAAC,GAAG,KAAK,CAAC,MAAM,CAAC,IAAI,EAAE,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAA;IAC7D,IAAI,MAAM,CAAC,MAAM,KAAK,CAAC,IAAI,CAAC,KAAK,CAAC,kBAAkB,IAAI,CAAC,KAAK,CAAC,gBAAgB;QAAE,OAAO,SAAS,CAAA;IACjG,MAAM,KAAK,GAA2C,EAAE,MAAM,EAAE,CAAA;IAChE,IAAI,KAAK,CAAC,kBAAkB,EAAE,CAAC;QAC7B,KAAK,CAAC,kBAAkB,GAAG,MAAM,CAAC,WAAW,CAC3C,CAAC,GAAG,KAAK,CAAC,kBAAkB,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,EAAE,EAAE,SAAS,EAAE,CAAC,CAAC,SAAS,EAAE,MAAM,EAAE,CAAC,CAAC,MAAM,EAAE,CAAC,CAAC,CACjG,CAAA;IACH,CAAC;IACD,IAAI,KAAK,CAAC,gBAAgB,EAAE,CAAC;QAC3B,KAAK,CAAC,gBAAgB,GAAG,MAAM,CAAC,WAAW,CACzC,CAAC,GAAG,KAAK,CAAC,gBAAgB,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,EAAE,EAAE,MAAM,EAAE,CAAC,CAAC,MAAM,EAAE,YAAY,EAAE,CAAC,CAAC,YAAY,EAAE,CAAC,CAAC,CACrG,CAAA;IACH,CAAC;IACD,qDAAqD;IACrD,IAAI,KAAK,CAAC,UAAU,EAAE,CAAC;QACrB,KAAK,CAAC,UAAU,GAAG,KAAK,CAAC,UAAU,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC;YAC9C,QAAQ,EAAE,CAAC,CAAC,QAAQ;YACpB,SAAS,EAAE,CAAC,CAAC,SAAS,IAAI,IAAI;SAC/B,CAAC,CAAC,CAAA;IACL,CAAC;IACD,IAAI,KAAK,CAAC,cAAc,CAAC,MAAM,GAAG,CAAC;QAAE,KAAK,CAAC,cAAc,GAAG,KAAK,CAAC,cAAc,CAAA;IAChF,IAAI,KAAK,CAAC,aAAa,CAAC,MAAM,GAAG,CAAC;QAAE,KAAK,CAAC,aAAa,GAAG,KAAK,CAAC,aAAa,CAAA;IAC7E,IAAI,KAAK,CAAC,KAAK,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QAC3B,KAAK,CAAC,KAAK,GAAG,KAAK,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC;YACpC,SAAS,EAAE,CAAC,CAAC,SAAS;YACtB,QAAQ,EAAE,CAAC,CAAC,QAAQ;YACpB,MAAM,EAAE,CAAC,CAAC,MAAM;YAChB,IAAI,EAAE,CAAC,CAAC,IAAI;YACZ,QAAQ,EAAE,CAAC,CAAC,QAAQ;YACpB,OAAO,EAAE,CAAC,CAAC,OAAO;SACnB,CAAC,CAAC,CAAA;IACL,CAAC;IACD,OAAO,KAAK,CAAA;AACd,CAAC","sourcesContent":["/**\n * mesh IO API — headless 文件加载\n *\n * STL 由 core 自持的 `mesh/stl-loader.ts` 解析（零 three addons）；3MF 由\n * `mesh/threemf-loader.ts` 解析（ZIP 解压 + XML，单位换算到 mm 基准）。\n * 坐标永远以 faijs 基准长度单位（mm）存储 — Shape 不贴 unit 标签（D3）。\n *\n * 单位换算边界（unit-system §5.2）：\n * - 本模块只处理 **mesh 格式（STL/3MF）**，坐标可直接折算 → `opts.unit` 提供即\n *   **强制设置模型的源单位**（直接指定，覆盖/忽略模型内部记录的单位——STL 无\n *   内部单位、3MF `<model unit>` 声明被覆盖），按 `unitScale(unit)` 折算坐标。\n *   它**只可能来自调用方的显式知识**（脚本作者手写 `cad.load({ file, unit })`、\n *   或宿主让用户选定单位后传入）；调用方不知道单位时**必须省略**——省略时：\n *   STL 走 faijs 启发式（`guessStlUnit`，unified 方案 §6.1/§8 —— 3d_editor\n *   迁移回归的单位断言依赖此行为）、3MF 走文件 `<model unit>`（无声明 →\n *   millimeter）。猜测/折算收敛在 faijs 内（红线 R0：宿主不自实现单位换算），\n *   G0 = 折算后坐标，渲染 = 拓扑 = G0。\n * - **STEP/.brep 不经过本模块**（走 BREP 链，load op 内 OCCT 读取）：OCCT 按\n *   文件内部单位声明折算（SI_UNIT），**不支持强制设置单位**——load op 对\n *   BREP 路径 + 用户显式 unit 直接**明确报错**（不缩放、不 workaround）。\n * - 3MF `<model unit>` 由解析器读取并换算（micron/mm/cm/inch/foot/meter）。\n *\n * 返回契约（unit-system §10.6）：`importFile` 返回 `{ shape, unit }` — `unit`\n * 是文件源单位（必然有值；faijs 是单一真源）：3MF 取 opts.unit（强制）或文件\n * 声明（无声明 → millimeter），STL 取 opts.unit 或 guessStlUnit 启发式猜测。\n * 坐标恒为基准值 — `unit` 只作元数据（sourceUnit 记录、导出目标判定），绝不\n * 参与几何缩放（读入折算已由解析器完成，二次缩放 = 双重换算）。\n */\n\nimport * as THREE from 'three'\nimport { geoToManifoldMesh } from '../boolean/geo-convert'\nimport { parseStl } from './stl-loader'\nimport { parseThreemf, type ThreemfObject, type ThreemfNode } from './threemf-loader'\nimport { parseBambu3mfFromEntries } from './threemf-bambu'\nimport { unitScale, type UnitName } from '../units'\nimport { guessStlUnit } from './stl-unit'\nimport type { Shape } from './types'\nimport type { CompoundShape } from '../shape'\nimport type { PbrAppearance } from '../api/appearance'\nimport type { FileMeta } from '../api/meta'\nimport type { ImportModel } from './import-model'\n\n/** Result of a unit-aware file import. */\nexport interface ImportFileResult {\n  shape: Shape\n  /**\n   * All parts the file declared, in declaration order (3MF `<build><item>` 序 /\n   * STL 单零件)。`shape` is `parts[0]`（单零件兼容，过渡期）。\n   * P0（2026-10-06-step-3mf-multipart-import-plan.md §5.4）：多对象 3MF 不再折叠。\n   */\n  parts: Shape[]\n  /**\n   * The file's source unit (always present; faijs is the single source of truth).\n   * 3MF: opts.unit (forced) if provided, else the file's declared unit\n   * (无声明 → millimeter). STL: opts.unit (forced) if provided, else the\n   * guessStlUnit heuristic result. STEP/BREP 不经过本模块（OCCT 链不支持\n   * 强制设置单位，load op 报错）。\n   * Metadata only — coordinates are already in the faijs base unit (mm).\n   */\n  unit: UnitName\n  /**\n   * Total parts the single file declared (e.g. 3MF `<build>` object count),\n   * present only when > 1. Single-part mesh (STL, single-object 3MF) omits it.\n   * 保留为 `parts.length`（>1 时）；多零件不再折叠后该字段仅供旧宿主判断。\n   */\n  multiPartCount?: number\n  /**\n   * 整体级元数据（文件级；方案 §5.1 3MF `<model><metadata>`）。STL/STEP 视实现\n   * 是否解析；无声明则省略。仅随导入结果上抛，不挂 Shape。\n   */\n  fileMeta?: FileMeta\n  /**\n   * 本次导入的结构数据（P0 §5.1）：零件身份表 + Bambu 视图（3MF 分支填充）。\n   * 单/多零件均登记（单零件 parts 长度 1）。\n   */\n  importModel?: ImportModel\n  /**\n   * 装配层级（方案 2026-10-08 §2.1 / 第 5 步「导入归一」）：当 3MF 含 `<components>`\n   * 装配结构时，按层级重建为 `CompoundShape`，每个子节点携带相对父的 `transform`\n   * （来自 3MF `<component transform>` / build `<item transform>`，行主序 3×4，平移在\n   * 末列，与写出器同源）。仅当存在真实装配（多 item 或任一 item 带 components）时存在；\n   * 单零件平铺导入不走它（`shape` / `parts` 已覆盖）。viewer 用 `parts`（已烘焙实例），\n   * 往返/层级消费者用 `assembly`（局部几何 + 节点 transform）。\n   */\n  assembly?: Shape | CompoundShape\n}\n\n/** SI prefixes that may precede .METRE. in a STEP SI_UNIT, → faijs UnitName. */\nconst SI_PREFIX_TO_UNIT: Record<string, UnitName> = {\n  '.MILLI.': 'mm',\n  '.CENTI.': 'cm',\n  '$': 'm',\n}\n\n/** CONVERSION_BASED_UNIT names (uppercased) found in real-world STEP files. */\nconst CONVERSION_NAME_TO_UNIT: Record<string, UnitName> = {\n  'METRE': 'm',\n  'METER': 'm',\n  'MILLIMETRE': 'mm',\n  'MILLIMETER': 'mm',\n  'CENTIMETRE': 'cm',\n  'CENTIMETER': 'cm',\n  'MICROMETRE': 'micron',\n  'MICROMETER': 'micron',\n  'INCH': 'inch',\n  'FOOT': 'foot',\n}\n\n/**\n * Bounded scan window for `detectStepUnit`. Unit entities sit at the front of\n * the DATA section (right after the product/context blocks); 256 KiB covers\n * every real-world header+context preamble observed so far. Recomputable\n * constant — raise if a fixture ever misses.\n */\nexport const STEP_UNIT_SCAN_PREFIX = 256 * 1024\n\n/**\n * Parse the declared length unit from STEP text (unit-system §10.4).\n *\n * Unit entities live in the DATA section (not HEADER — ISO 10303-21 reserves\n * HEADER for FILE_DESCRIPTION/FILE_NAME/FILE_SCHEMA), near its start. We scan\n * a bounded prefix; the justification is \"unit entities sit at the front of\n * the DATA section\", not \"top of file\".\n *\n * Recognized forms, both attached to a LENGTH_UNIT():\n * - `SI_UNIT(<prefix>, .METRE.)` — prefix `.MILLI.`/`.CENTI.`/`.MICRO.` or `$`.\n * - `CONVERSION_BASED_UNIT('<NAME>', #n)` — inch/foot/etc.\n *\n * Metadata only — NEVER used to scale geometry (OCCT already normalizes on\n * read; re-scaling = double conversion).\n *\n * @param stepText - the full STEP file text to scan (only a bounded prefix is read).\n * @returns the faijs UnitName, or null when no length-unit declaration is found\n *   (STEP permits omitting it; caller falls back to the base unit).\n */\nexport function detectStepUnit(stepText: string): UnitName | null {\n  const head = stepText.slice(0, STEP_UNIT_SCAN_PREFIX)\n\n  // 1) CONVERSION_BASED_UNIT('<NAME>', #n) — non-SI units (inch/foot/…).\n  const conv = head.match(/CONVERSION_BASED_UNIT\\s*\\(\\s*'([^']+)'/i)\n  if (conv) {\n    const mapped = CONVERSION_NAME_TO_UNIT[conv[1].toUpperCase()]\n    if (mapped) return mapped\n  }\n\n  // 2) SI_UNIT(<prefix>, .METRE.) — the .METRE. guard excludes angle entities\n  //    (they carry .RADIAN./.STERADIAN., never .METRE.).\n  const si = head.match(/SI_UNIT\\s*\\(\\s*([^)]*?)\\s*,\\s*\\.METRE\\.\\s*\\)/i)\n  if (si) {\n    const prefix = si[1].trim().toUpperCase()\n    if (prefix === '.MICRO.') return 'micron'\n    const mapped = SI_PREFIX_TO_UNIT[prefix]\n    if (mapped) return mapped\n  }\n\n  return null\n}\n\n/**\n * Load geometry from raw file bytes (headless variant).\n *\n * @param buffer - the raw file bytes to parse (already decompressed; stpz\n *   unzipping is the caller's job — faijs never unzips implicitly).\n * @param format - format identifier such as 'stl', '3mf'/'threemf' or 'step'\n *   (defaults to 'stl'). **仅 mesh 格式（STL/3MF）走本模块**；STEP/BREP 走\n *   BREP 链（load op 内 OCCT 读取，不支持强制设置单位）。\n * @param opts - optional settings; `unit` (a UnitName string) **force-sets the\n *   model's source unit** (STL/3MF): it is NOT a default, it directly specifies\n *   the unit and overrides/ignores any unit recorded inside the model (3MF\n *   `<model unit>`; STL has none), geometry scaled by `unitScale(unit)`. Only\n *   provide it when the caller actually knows the unit (author-written\n *   `cad.load({ file, unit })`, or a host unit picker). When the caller does\n *   NOT know the unit, it MUST omit `unit` — STL then guesses via\n *   `guessStlUnit` (the only allowed guessing path), 3MF uses the file\n *   declaration (none → millimeter). A wrong explicit unit scales geometry\n *   wrongly and is never re-guessed.\n * @returns the shape with base-unit coordinates plus the file's source unit\n *   (`unit`, metadata only; always present — faijs is the single source of truth).\n */\nexport async function importFile(\n  buffer: ArrayBuffer,\n  format?: string,\n  opts?: { unit?: UnitName },\n): Promise<ImportFileResult> {\n  const fmt = (format ?? 'stl').toLowerCase()\n\n  if (fmt === '3mf' || fmt === 'threemf') {\n    const archive = await parseThreemf(buffer, opts)\n    // P0（方案 §5.4）：不再折叠——返回全部 `<build><item>` 对象（declaration order，\n    // 坐标已在 parseThreemf 里折算为 faijs 基准单位）。`shape` 保留为 parts[0]\n    // （单零件兼容，过渡期）。\n    if (archive.objects.length === 0) {\n      throw new Error('[mesh/io] 3MF contains no objects')\n    }\n    // Bambu 元数据（盘号/挤出机/视图变换）：有 Bambu 配置才产生内容，普通 3MF 返回空表。\n    // P4：根 model XML 直传（3MF `<build>` 在 resources 前；id 两套编号经父\n    // object components 关联——leafParts 表承载）。\n    const bambu = parseBambu3mfFromEntries(archive.extraEntries, archive.modelXml)\n    const parts = archive.objects.map(threemfObjectToShape)\n    const multiPartCount = parts.length > 1 ? parts.length : undefined\n    const importModel: ImportModel = {\n      format: '3mf',\n      unit: archive.unit,\n      parts: archive.objects.map((obj, i) => {\n        const part: ImportModel['parts'][number] = {\n          index: i,\n          name: obj.name ?? `imported:${i}`,\n        }\n        if (obj.baseColor) part.color = [obj.baseColor[0], obj.baseColor[1], obj.baseColor[2]]\n        if (obj.meta) part.meta = obj.meta\n        // Bambu 身份：3MF `<object id>`（叶子实例）与 Bambu objects 表（键为\n        // model_settings 父对象 id）是两套编号——经父 object components 关联\n        // （ThreemfObject.parentObjectId/componentIndex → bambu.leafParts）。\n        const bm = obj.parentObjectId !== undefined\n          ? bambu.leafParts.get(`${obj.parentObjectId}:${obj.componentIndex ?? 1}`)\n          : undefined\n        if (bm) {\n          part.objectId = bm.objectId\n          if (bm.plateId > 0) part.plateId = bm.plateId\n          // Bambu extruder 1-based（默认 1）：显式登记文件声明值\n          part.extruder = bm.extruder\n          part.partId = bm.partId\n        }\n        return part\n      }),\n      ...(archive.fileMeta ? { fileMeta: archive.fileMeta } : {}),\n    }\n    const bambuViews = buildBambuViews(bambu)\n    if (bambuViews) importModel.bambuViews = bambuViews\n    // 装配层级重建（方案 §2.1 / 第 5 步）：含 `<components>` 时还原 CompoundShape，\n    // 叶节点携带相对父 transform；单零件平铺导入不挂载。\n    const assembly = archive.hierarchy && archive.localGeomById\n      ? buildAssemblyFromArchive(archive.hierarchy, archive.localGeomById)\n      : undefined\n    return {\n      shape: parts[0],\n      parts,\n      unit: archive.unit,\n      multiPartCount,\n      importModel,\n      // 整体级元数据（`<model><metadata>`）随导入结果上抛（方案 §5.1）。\n      ...(archive.fileMeta ? { fileMeta: archive.fileMeta } : {}),\n      ...(assembly ? { assembly } : {}),\n    }\n  }\n\n  if (fmt === 'stl') {\n    const geo = parseStl(buffer)\n    // STL 无单位声明：opts.unit 显式声明优先；未声明时做启发式猜测\n    // （guessStlUnit —— 历史 host 行为，unified §6.1/§8 迁移基线）。猜测与\n    // 折算都在 faijs 内完成（红线 R0），G0 即基准值，宿主不再二次换算。\n    // unit 字段回传源单位（声明值或猜测值），供宿主记录 sourceUnit 元数据。\n    let scale = 1\n    let sourceUnit: UnitName = 'mm'\n    const declared = opts?.unit\n    if (declared) {\n      sourceUnit = declared\n      scale = unitScale(declared)\n    } else {\n      geo.computeBoundingBox()\n      const bb = geo.boundingBox\n      if (bb) {\n        sourceUnit = guessStlUnit({\n          min: [bb.min.x, bb.min.y, bb.min.z],\n          max: [bb.max.x, bb.max.y, bb.max.z],\n        })\n        scale = unitScale(sourceUnit)\n      }\n    }\n    if (scale !== 1) {\n      const attr = geo.getAttribute('position') as THREE.BufferAttribute\n      const arr = attr.array as Float32Array\n      for (let i = 0; i < arr.length; i++) arr[i] *= scale\n    }\n    const shape = geoToManifoldMesh(geo)\n    return { shape, parts: [shape], unit: sourceUnit }\n  }\n\n  // STEP goes through the BREP chain (loadBrep → OCCT, which normalizes to the\n  // base unit on read). The mesh io path has no kernel-independent STEP parser\n  // and must not fake one — a missing path is an error, not a fallback.\n  throw new Error(`[mesh/io] unsupported format: ${fmt}`)\n}\n\n/** 单个 3MF `<build><item>` 对象 → Shape（P0：逐对象构造，替换原\"只取第一个\"收敛）。 */\nfunction threemfObjectToShape(obj: ThreemfObject): Shape {\n  return {\n    positions: obj.positions as Float32Array,\n    indices: obj.indices as Uint32Array,\n    // P2（方案 §5 3MF 行）：对象级 baseColor → appearance.color（sRGB 原值，\n    // 宽容兼容：无 baseColor 不带 appearance）。colorgroup（vertexColors）与\n    // 逐三角形材质属 Phase 2（materialGroups / vertexColors），P2 不映射。\n    ...(obj.baseColor ? { appearance: { color: [obj.baseColor[0], obj.baseColor[1], obj.baseColor[2]] } } : {}),\n    // P4（方案 §5 3MF 行）：逐三角形 basematerials（p1=p2=p3）→ materialGroups\n    // （三角形区间 + appearance.color）；无则不带。vertexColors（colorgroup）\n    // 由上层（编辑器导入路径）消费，io 单零件收敛不展开为材质分组。\n    ...(obj.materialGroups && obj.materialGroups.length > 0\n      ? {\n          materialGroups: obj.materialGroups.map((g) => ({\n            start: g.start,\n            count: g.count,\n            appearance: { color: [g.color[0], g.color[1], g.color[2]] } as PbrAppearance,\n          })),\n        }\n      : {}),\n    // 零件级元数据（方案 §5.1 3MF 行）：对象 name/partnumber/metadatagroup → meta。\n    ...(obj.meta ? { meta: obj.meta } : {}),\n  }\n}\n\n/**\n * 由 3MF 装配层级重建 `CompoundShape`（方案 §2.1 / 第 5 步「导入归一」）。\n *\n * 见 `ThreemfArchive.hierarchy` / `localGeomById`：节点带**相对父**位姿（行主序 3×4，\n * 平移在末列，与写出器 `transformToMatrix12` 同源）；几何来自 `localGeomById` 的**未烘焙**\n * 局部网格。叶节点的最终 `Shape.transform` 即该相对位姿（写回 `Shape.transform`，供\n * 后续导出按 3MF `<component transform>` 原样还原——D1 往返）。容器节点落为\n * `CompoundShape`（不含 `transform` / `meta`，与 `shape.ts` 的 `CompoundShape` 形态一致）。\n *\n * 注：`shape.ts` 的 `CompoundShape.children` 当前声明为 `Shape[]`（非递归），故嵌套装配\n * 在类型层面暂不表达；运行时子节点可为子 `CompoundShape`（由 `isCompoundLike` 结构判定消费）。\n * 把 `CompoundShape` 改为递归类型是独立的后续重构（会波及 faijs-extra / cad-runtime），本步\n * 以最小改动桥接——见下方 `children` 处的收窄断言。\n *\n * 仅在存在真实装配（多 item 或任一 item 带 components）时返回非空；单零件平铺导入返回\n * `undefined`（由调用方决定是否挂载到 `result.assembly`，避免改变单零件结果形状）。\n */\nfunction buildAssemblyFromArchive(\n  hierarchy: ThreemfNode[],\n  localGeomById: Map<number, ThreemfObject>,\n): Shape | CompoundShape | undefined {\n  const hasHierarchy = hierarchy.length > 1 || hierarchy.some((n) => (n.children?.length ?? 0) > 0)\n  if (!hasHierarchy) return undefined\n\n  const buildNode = (node: ThreemfNode): Shape | CompoundShape => {\n    const obj = localGeomById.get(node.objectId)\n    if (node.children && node.children.length > 0) {\n      // 收窄断言：共享 CompoundShape 非递归声明，运行时子节点可含子 CompoundShape。\n      return { kind: 'compound', children: node.children.map(buildNode) as Shape[] }\n    }\n    // 叶节点：局部几何 + 相对父位姿。\n    if (!obj || !obj.positions || !obj.indices) {\n      return { kind: 'compound', children: [] }\n    }\n    const leaf = threemfObjectToShape(obj)\n    if (node.transform) {\n      ;(leaf as Shape & { transform?: unknown }).transform = { matrix: Array.from(node.transform) }\n    }\n    return leaf\n  }\n\n  return hierarchy.length === 1\n    ? buildNode(hierarchy[0])\n    : { kind: 'compound', children: hierarchy.map(buildNode) as Shape[] }\n}\n\n/** Bambu 显示视图数据 → ImportModel.bambuViews（无任何 Bambu 结构时省略）。 */\nfunction buildBambuViews(\n  bambu: import('./threemf-bambu').Bambu3mfMetadata,\n): ImportModel['bambuViews'] | undefined {\n  const plates = [...bambu.plates.keys()].sort((a, b) => a - b)\n  if (plates.length === 0 && !bambu.assembleTransforms && !bambu.importTransforms) return undefined\n  const views: NonNullable<ImportModel['bambuViews']> = { plates }\n  if (bambu.assembleTransforms) {\n    views.assembleTransforms = Object.fromEntries(\n      [...bambu.assembleTransforms].map(([k, v]) => [k, { transform: v.transform, offset: v.offset }]),\n    )\n  }\n  if (bambu.importTransforms) {\n    views.importTransforms = Object.fromEntries(\n      [...bambu.importTransforms].map(([k, v]) => [k, { matrix: v.matrix, sourceOffset: v.sourceOffset }]),\n    )\n  }\n  // P4：完整消费面随结果回传——宿主重建 Bambu3mfMetadata 不再回读 archive。\n  if (bambu.buildItems) {\n    views.buildItems = bambu.buildItems.map((b) => ({\n      objectId: b.objectId,\n      transform: b.transform ?? null,\n    }))\n  }\n  if (bambu.filamentColors.length > 0) views.filamentColors = bambu.filamentColors\n  if (bambu.filamentTypes.length > 0) views.filamentTypes = bambu.filamentTypes\n  if (bambu.parts.length > 0) {\n    views.parts = bambu.parts.map((p) => ({\n      partIndex: p.partIndex,\n      objectId: p.objectId,\n      partId: p.partId,\n      name: p.name,\n      extruder: p.extruder,\n      plateId: p.plateId,\n    }))\n  }\n  return views\n}\n"]}

package/dist/mesh/primitives.js

@@ -44,7 +44,7 @@ export function box(params) {
     // pre-rotation sizes must be (width, height, depth) — 裁决 7 xyz contract.
     const geo = new THREE.BoxGeometry(width, height, depth);
     geo.applyMatrix4(new THREE.Matrix4().makeRotationX(Math.PI / 2));
-    // brepjs box semantics: corner at origin by default; centered at origin when
+    // 原 brepjs box semantics: corner at origin by default; centered at origin when
     // `centered` (no `at`); `at` (CENTER semantics) takes precedence.
     const at = params.at;
     let tx = 0;

package/dist/mesh/primitives.js.map

@@ -1 +1 @@
-{"version":3,"file":"primitives.js","sourceRoot":"","sources":["../../src/mesh/primitives.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;GAaG;AAEH,OAAO,KAAK,KAAK,MAAM,OAAO,CAAA;AAC9B,OAAO,EAAE,gBAAgB,EAAE,MAAM,+BAA+B,CAAA;AAChE,OAAO,EAAE,iBAAiB,EAAE,MAAM,wBAAwB,CAAA;AAE1D,OAAO,EAAE,SAAS,EAAE,MAAM,SAAS,CAAA;AAEnC,aAAa;AAEb,kEAAkE;AAClE,SAAS,UAAU,CAAC,GAAyB,EAAE,UAAgC;IAC7E,MAAM,KAAK,GAAG,iBAAiB,CAAC,GAAG,CAAU,CAAA;IAC7C,IAAI,UAAU,KAAK,SAAS;QAAE,KAAK,CAAC,UAAU,GAAG,UAAU,CAAA;IAC3D,OAAO,KAAK,CAAA;AACd,CAAC;AAED,eAAe;AAEf;;;;;;;;;;;GAWG;AACH,MAAM,UAAU,GAAG,CAAC,MAAiB;IACnC,MAAM,EAAE,KAAK,EAAE,KAAK,EAAE,MAAM,EAAE,GAAG,MAAM,CAAA;IACvC,6EAA6E;IAC7E,yEAAyE;IACzE,yEAAyE;IACzE,MAAM,GAAG,GAAG,IAAI,KAAK,CAAC,WAAW,CAAC,KAAK,EAAE,MAAM,EAAE,KAAK,CAAC,CAAA;IACvD,GAAG,CAAC,YAAY,CAAC,IAAI,KAAK,CAAC,OAAO,EAAE,CAAC,aAAa,CAAC,IAAI,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAA;IAChE,6EAA6E;IAC7E,kEAAkE;IAClE,MAAM,EAAE,GAAG,MAAM,CAAC,EAAE,CAAA;IACpB,IAAI,EAAE,GAAG,CAAC,CAAA;IACV,IAAI,EAAE,GAAG,CAAC,CAAA;IACV,IAAI,EAAE,GAAG,CAAC,CAAA;IACV,IAAI,EAAE,KAAK,SAAS,EAAE,CAAC;QACrB,CAAC;QAAA,CAAC,EAAE,EAAE,EAAE,EAAE,EAAE,CAAC,GAAG,EAAE,CAAA;IACpB,CAAC;SAAM,IAAI,CAAC,MAAM,CAAC,QAAQ,EAAE,CAAC;QAC5B,EAAE,GAAG,KAAK,GAAG,CAAC,CAAA;QACd,EAAE,GAAG,KAAK,GAAG,CAAC,CAAA;QACd,EAAE,GAAG,MAAM,GAAG,CAAC,CAAA;IACjB,CAAC;IACD,IAAI,EAAE,KAAK,CAAC,IAAI,EAAE,KAAK,CAAC,IAAI,EAAE,KAAK,CAAC;QAAE,GAAG,CAAC,SAAS,CAAC,EAAE,EAAE,EAAE,EAAE,EAAE,CAAC,CAAA;IAC/D,+CAA+C;IAC/C,gEAAgE;IAChE,yEAAyE;IACzE,MAAM,UAAU,GAAwB;QACtC,EAAE,KAAK,EAAE,CAAC,EAAE,KAAK,EAAE,CAAC,EAAE;QACtB,EAAE,KAAK,EAAE,CAAC,EAAE,KAAK,EAAE,CAAC,EAAE;QACtB,EAAE,KAAK,EAAE,CAAC,EAAE,KAAK,EAAE,CAAC,EAAE;QACtB,EAAE,KAAK,EAAE,CAAC,EAAE,KAAK,EAAE,CAAC,EAAE;QACtB,EAAE,KAAK,EAAE,CAAC,EAAE,KAAK,EAAE,CAAC,EAAE;QACtB,EAAE,KAAK,EAAE,EAAE,EAAE,KAAK,EAAE,CAAC,EAAE;KACxB,CAAA;IACD,OAAO,UAAU,CAAC,GAAG,EAAE,UAAU,CAAC,CAAA;AACpC,CAAC;AAED;;;;;GAKG;AACH,MAAM,UAAU,MAAM,CAAC,MAAoB;IACzC,MAAM,IAAI,GAAG,SAAS,CAAC,MAAM,CAAC,IAAI,IAAI,MAAM,CAAC,QAAQ,CAAC,CAAA;IACtD,MAAM,GAAG,GAAG,gBAAgB,CAAC,QAAQ,EAAE,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,IAAI,CAAC,CAAA;IAC/D,IAAI,MAAM,CAAC,MAAM,EAAE,CAAC;QAClB,GAAG,CAAC,SAAS,CAAC,MAAM,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,MAAM,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,MAAM,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAA;IACrE,CAAC;IACD,OAAO,UAAU,CAAC,GAAG,CAAC,CAAA;AACxB,CAAC;AAED;;;;;;;;;;GAUG;AACH,MAAM,UAAU,QAAQ,CAAC,MAAsB;IAC7C,MAAM,IAAI,GAAG,SAAS,CAAC,MAAM,CAAC,IAAI,IAAI,MAAM,CAAC,QAAQ,CAAC,CAAA;IACtD,MAAM,GAAG,GAAG,IAAI,KAAK,CAAC,gBAAgB,CAAC,MAAM,CAAC,MAAM,EAAE,MAAM,CAAC,MAAM,EAAE,MAAM,CAAC,MAAM,EAAE,IAAI,CAAC,CAAA;IACzF,GAAG,CAAC,YAAY,CAAC,IAAI,KAAK,CAAC,OAAO,EAAE,CAAC,aAAa,CAAC,IAAI,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAA;IAChE,2DAA2D;IAC3D,6EAA6E;IAC7E,MAAM,KAAK,GAAG,MAAM,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAA;IACjC,MAAM,KAAK,GAAG,MAAM,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAA;IACjC,MAAM,KAAK,GAAG,CAAC,MAAM,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,MAAM,CAAC,QAAQ,KAAK,IAAI,CAAC,CAAC,CAAC,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAA;IACxF,GAAG,CAAC,SAAS,CAAC,KAAK,EAAE,KAAK,EAAE,KAAK,GAAG,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,CAAA;IACtD,kEAAkE;IAClE,wCAAwC;IACxC,MAAM,UAAU,GAAwB;QACtC,EAAE,KAAK,EAAE,CAAC,EAAE,KAAK,EAAE,CAAC,GAAG,IAAI,EAAE;QAC7B,EAAE,KAAK,EAAE,CAAC,GAAG,IAAI,EAAE,KAAK,EAAE,IAAI,EAAE;QAChC,EAAE,KAAK,EAAE,CAAC,GAAG,IAAI,EAAE,KAAK,EAAE,IAAI,EAAE;KACjC,CAAA;IACD,OAAO,UAAU,CAAC,GAAG,EAAE,UAAU,CAAC,CAAA;AACpC,CAAC;AAED;;;;;;;;;;;GAWG;AACH,MAAM,UAAU,IAAI,CAAC,MAAkB;IACrC,MAAM,IAAI,GAAG,SAAS,CAAC,MAAM,CAAC,IAAI,IAAI,MAAM,CAAC,QAAQ,CAAC,CAAA;IACtD,MAAM,GAAG,GAAG,IAAI,KAAK,CAAC,YAAY,CAChC,IAAI,CAAC,GAAG,CAAC,MAAM,CAAC,YAAY,EAAE,MAAM,CAAC,SAAS,CAAC,EAC/C,MAAM,CAAC,MAAM,EACb,IAAI,CACL,CAAA;IACD,GAAG,CAAC,YAAY,CAAC,IAAI,KAAK,CAAC,OAAO,EAAE,CAAC,aAAa,CAAC,IAAI,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAA;IAChE,6DAA6D;IAC7D,mEAAmE;IACnE,IAAI,SAA+B,CAAA;IACnC,IAAI,MAAM,CAAC,SAAS,KAAK,CAAC,EAAE,CAAC;QAC3B,SAAS,GAAG,GAAG,CAAA;IACjB,CAAC;SAAM,CAAC;QACN,MAAM,IAAI,GAAG,IAAI,KAAK,CAAC,gBAAgB,CACrC,MAAM,CAAC,SAAS,EAChB,MAAM,CAAC,YAAY,EACnB,MAAM,CAAC,MAAM,EACb,IAAI,CACL,CAAA;QACD,IAAI,CAAC,YAAY,CAAC,IAAI,KAAK,CAAC,OAAO,EAAE,CAAC,aAAa,CAAC,IAAI,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAA;QACjE,SAAS,GAAG,IAAI,CAAA;IAClB,CAAC;IACD,2DAA2D;IAC3D,8EAA8E;IAC9E,MAAM,KAAK,GAAG,MAAM,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAA;IACjC,MAAM,KAAK,GAAG,MAAM,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAA;IACjC,MAAM,KAAK,GAAG,CAAC,MAAM,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,MAAM,CAAC,QAAQ,KAAK,IAAI,CAAC,CAAC,CAAC,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAA;IACxF,SAAS,CAAC,SAAS,CAAC,KAAK,EAAE,KAAK,EAAE,KAAK,GAAG,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,CAAA;IAC5D,0DAA0D;IAC1D,wDAAwD;IACxD,gDAAgD;IAChD,2BAA2B;IAC3B,MAAM,UAAU,GACd,MAAM,CAAC,SAAS,KAAK,CAAC;QACpB,CAAC,CAAC;YACE,EAAE,KAAK,EAAE,CAAC,EAAE,KAAK,EAAE,IAAI,EAAE;YACzB,EAAE,KAAK,EAAE,IAAI,EAAE,KAAK,EAAE,IAAI,EAAE;SAC7B;QACH,CAAC,CAAC;YACE,EAAE,KAAK,EAAE,CAAC,EAAE,KAAK,EAAE,CAAC,GAAG,IAAI,EAAE;YAC7B,EAAE,KAAK,EAAE,CAAC,GAAG,IAAI,EAAE,KAAK,EAAE,IAAI,EAAE;YAChC,EAAE,KAAK,EAAE,CAAC,GAAG,IAAI,EAAE,KAAK,EAAE,IAAI,EAAE;SACjC,CAAA;IACP,OAAO,UAAU,CAAC,SAAS,EAAE,UAAU,CAAC,CAAA;AAC1C,CAAC;AAED;;;;;GAKG;AACH,MAAM,UAAU,KAAK,CAAC,MAAmB;IACvC,MAAM,KAAK,GAAG,MAAM,CAAC,KAAK,CAAA;IAC1B,MAAM,MAAM,GAAG,MAAM,CAAC,MAAM,CAAA;IAC5B,MAAM,KAAK,GAAG,MAAM,CAAC,KAAK,CAAA;IAC1B,MAAM,MAAM,GAAG,MAAM,CAAC,MAAM,CAAA;IAE5B,MAAM,QAAQ,GAAG,CAAC,KAAK,GAAG,IAAI,CAAC,EAAE,CAAC,GAAG,GAAG,CAAA;IACxC,MAAM,WAAW,GAAG,MAAM,GAAG,CAAC,CAAA;IAC9B,MAAM,EAAE,GAAG,KAAK,GAAG,CAAC,CAAA;IACpB,MAAM,YAAY,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,EAAE,GAAG,MAAM,GAAG,IAAI,CAAC,GAAG,CAAC,QAAQ,CAAC,CAAC,CAAA;IAClE,8CAA8C;IAC9C,gDAAgD;IAChD,MAAM,UAAU,GAAG,YAAY,IAAI,KAAK,CAAA;IAExC,MAAM,SAAS,GAAG,UAAU;QAC1B,CAAC,CAAC,IAAI,YAAY,CAAC;YACf,CAAC,WAAW,EAAE,CAAC,EAAE,EAAE,CAAC;YACpB,CAAC,WAAW,EAAG,EAAE,EAAE,CAAC;YACpB,CAAC,WAAW,EAAI,CAAC,EAAE,MAAM;YACxB,WAAW,EAAE,CAAC,EAAE,EAAE,CAAC;YACnB,WAAW,EAAG,EAAE,EAAE,CAAC;YACnB,WAAW,EAAI,CAAC,EAAE,MAAM;SAC1B,CAAC;QACJ,CAAC,CAAC,IAAI,YAAY,CAAC;YACf,CAAC,WAAW,EAAE,CAAC,EAAE,EAAE,CAAC;YACpB,CAAC,WAAW,EAAG,EAAE,EAAE,CAAC;YACpB,CAAC,WAAW,EAAG,YAAY,EAAE,MAAM;YACnC,CAAC,WAAW,EAAE,CAAC,YAAY,EAAE,MAAM;YAClC,WAAW,EAAE,CAAC,EAAE,EAAE,CAAC;YACnB,WAAW,EAAG,EAAE,EAAE,CAAC;YACnB,WAAW,EAAG,YAAY,EAAE,MAAM;YAClC,WAAW,EAAE,CAAC,YAAY,EAAE,MAAM;SACpC,CAAC,CAAA;IAEN,MAAM,OAAO,GAAG,UAAU;QACxB,CAAC,CAAC,IAAI,WAAW,CAAC;YACd,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;YACjB,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;YACjB,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;YACjB,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;SAClB,CAAC;QACJ,CAAC,CAAC,IAAI,WAAW,CAAC;YACd,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;YACjB,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;YACjB,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;YACjB,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;YACjB,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;YACjB,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;SAClB,CAAC,CAAA;IAEN,MAAM,GAAG,GAAG,IAAI,KAAK,CAAC,cAAc,EAAE,CAAA;IACtC,GAAG,CAAC,YAAY,CAAC,UAAU,EAAE,IAAI,KAAK,CAAC,eAAe,CAAC,SAAS,EAAE,CAAC,CAAC,CAAC,CAAA;IACrE,GAAG,CAAC,QAAQ,CAAC,IAAI,KAAK,CAAC,eAAe,CAAC,OAAO,EAAE,CAAC,CAAC,CAAC,CAAA;IAEnD,IAAI,MAAM,CAAC,MAAM,EAAE,CAAC;QAClB,GAAG,CAAC,SAAS,CAAC,MAAM,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,MAAM,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,MAAM,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAA;IACrE,CAAC;IACD,OAAO,UAAU,CAAC,GAAG,CAAC,CAAA;AACxB,CAAC;AAED;;;;;GAKG;AACH,MAAM,CAAC,KAAK,UAAU,KAAK,CAAC,MAQ3B;IACC,MAAM,EAAE,SAAS,EAAE,GAAG,MAAM,MAAM,CAAC,2BAA2B,CAAC,CAAA;IAC/D,MAAM,GAAG,GAAG,SAAS,CAAC;QACpB,MAAM,EAAE,MAAM,CAAC,MAAM;QACrB,OAAO,EAAE,MAAM,CAAC,OAAO;QACvB,MAAM,EAAE,MAAM,CAAC,MAAM;QACrB,WAAW,EAAE,MAAM,CAAC,WAAW,IAAI,CAAC;QACpC,MAAM,EAAE,MAAM,CAAC,MAAM;QACrB,IAAI,EAAE,MAAM,CAAC,IAAI;QACjB,IAAI,EAAE,SAAS,CAAC,MAAM,CAAC,IAAI,CAAC;KAC7B,CAAC,CAAA;IACF,OAAO,UAAU,CAAC,GAAG,CAAC,CAAA;AACxB,CAAC;AAED;;;;;;GAMG;AACH,MAAM,CAAC,KAAK,UAAU,GAAG,CAAC,MAAiB;IACzC,MAAM,EAAE,MAAM,EAAE,GAAG,MAAM,MAAM,CAAC,mBAAmB,CAAC,CAAA;IACpD,MAAM,GAAG,GAAG,MAAM,CAAC,GAAG,IAAI,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,EAAE,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,EAAE,EAAE,EAAE,EAAE,CAAC,CAAC,CAAA;IACzD,MAAM,MAAM,GAAqD;QAC/D,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;QAC/B,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;KAChC,CAAA;IACD,MAAM,IAAI,GAAG,MAAM,MAAM,CACvB,MAAM,CAAC,IAAI,EACX,MAAM,CAAC,MAAM,IAAI,EAAE,EACnB,MAAM,EACN,MAAM,CAAC,UAAU,IAAI,GAAG,CACzB,CAAA;IACD,OAAO,EAAE,SAAS,EAAE,IAAI,CAAC,SAAS,EAAE,OAAO,EAAE,IAAI,CAAC,OAAO,EAAE,CAAA;AAC7D,CAAC","sourcesContent":["/**\n * mesh 基本体 API — 从现有纯函数提取的统一接口\n *\n * 提取来源（§5.7）：\n * - box/sphere/cylinder/cone/wedge ← engine/primitives/mesh-primitives.ts (makePrimitiveGeo)\n * - screw ← engine/primitives/screw/screw.ts (makeScrew)\n *\n * `text` / `svgExtrude`（three 的 Shape / ExtrudeGeometry / SVGLoader 链）已随\n * B 组迁到 `@faicad/faijs-extra` 的 `mesh/primitives.ts`，core 的 mesh 面不再\n * 承载 three 的非基础几何生成链。\n *\n * 所有函数返回 Shape (ManifoldMeshData)：THREE.BufferGeometry → geoToManifoldMesh 转换。\n * 坐标系：Z-up、毫米。\n */\n\nimport * as THREE from 'three'\nimport { makePrimitiveGeo } from '../primitives/mesh-primitives'\nimport { geoToManifoldMesh } from '../boolean/csg-backend'\nimport type { Shape, BoxParams, SphereParams, CylinderParams, ConeParams, WedgeParams, SdfParams } from './types'\nimport { clampNRad } from './types'\n\n// ── 内部工具 ──\n\n/** THREE.BufferGeometry → Shape (ManifoldMeshData)；可选携带面结构元数据。 */\nfunction geoToShape(geo: THREE.BufferGeometry, faceRanges?: Shape['faceRanges']): Shape {\n  const shape = geoToManifoldMesh(geo) as Shape\n  if (faceRanges !== undefined) shape.faceRanges = faceRanges\n  return shape\n}\n\n// ── 创建 API ──\n\n/**\n * Create a box solid (brepjs contract, §4.1 A 决策).\n *\n * `box(width, depth, height)` — X=width, Y=depth, Z=height — places the\n * min-corner at the origin by default (`centered:false`). `centered: true`\n * centers the box at the origin; `at` is CENTER semantics and takes precedence\n * over `centered`. The `segments` option is consumed by the tessellation\n * caller (this mesh builder keeps it via clampNRad when present).\n *\n * @param params - box parameters (width/depth/height, optional at/centered/segments).\n * @returns the box shape.\n */\nexport function box(params: BoxParams): Shape {\n  const { width, depth, height } = params\n  // THREE.BoxGeometry(a, b, c) is Y-up (X=a, Y=b, Z=c); after the +90° rotateX\n  // the dims map to X=a, Y=c, Z=b. To reach X=width, Y=depth, Z=height the\n  // pre-rotation sizes must be (width, height, depth) — 裁决 7 xyz contract.\n  const geo = new THREE.BoxGeometry(width, height, depth)\n  geo.applyMatrix4(new THREE.Matrix4().makeRotationX(Math.PI / 2))\n  // brepjs box semantics: corner at origin by default; centered at origin when\n  // `centered` (no `at`); `at` (CENTER semantics) takes precedence.\n  const at = params.at\n  let tx = 0\n  let ty = 0\n  let tz = 0\n  if (at !== undefined) {\n    ;[tx, ty, tz] = at\n  } else if (!params.centered) {\n    tx = width / 2\n    ty = depth / 2\n    tz = height / 2\n  }\n  if (tx !== 0 || ty !== 0 || tz !== 0) geo.translate(tx, ty, tz)\n  // 面结构（P4 面级）：BoxGeometry 12 三角形 = 6 面 × 2，顺序固定\n  // (+X, −X, +Y, −Y, +Z, −Z)；geoToManifoldMesh 焊接顶点保三角形序，故面序契约成立。\n  // 面序号契约（setFaceColor 的 faceIds 即此序号）：0=+X, 1=−X, 2=+Y, 3=−Y, 4=+Z, 5=−Z。\n  const faceRanges: Shape['faceRanges'] = [\n    { start: 0, count: 2 },\n    { start: 2, count: 2 },\n    { start: 4, count: 2 },\n    { start: 6, count: 2 },\n    { start: 8, count: 2 },\n    { start: 10, count: 2 },\n  ]\n  return geoToShape(geo, faceRanges)\n}\n\n/**\n * Create a sphere centered at the origin (or the optional `center`).\n *\n * @param params - sphere parameters (radius, optional segments, optional center).\n * @returns the sphere shape.\n */\nexport function sphere(params: SphereParams): Shape {\n  const segs = clampNRad(params.nRad ?? params.segments)\n  const geo = makePrimitiveGeo('sphere', params.radius * 2, segs)\n  if (params.center) {\n    geo.translate(params.center[0], params.center[1], params.center[2])\n  }\n  return geoToShape(geo)\n}\n\n/**\n * Create a cylinder along +Z (`cylinder(radius, height, { at?, centered?,\n * segments? })` brepjs 契约，§4.3 A 决策；与 brep 路径逐点对齐）。\n *\n * 锚点：`at` 是**底面轴心**（BASE）语义（默认 [0,0,0]，底面在原点、+Z 延伸）；\n * `centered:true` 指底面落到 −h/2（无 at 时居中到原点）——与 `at` 同给时以\n * `at` 为中心。`segments` 经 clampNRad 消费（P0 §5）。\n *\n * @param params - cylinder parameters (radius, height, optional at/centered/segments).\n * @returns the cylinder shape.\n */\nexport function cylinder(params: CylinderParams): Shape {\n  const segs = clampNRad(params.nRad ?? params.segments)\n  const geo = new THREE.CylinderGeometry(params.radius, params.radius, params.height, segs)\n  geo.applyMatrix4(new THREE.Matrix4().makeRotationX(Math.PI / 2))\n  // geometry（rotateX 后）沿 z ∈ [-h/2, +h/2]（three 默认 Y-up 居中）：\n  // 目标底面中心 in baseZ = (at?.[2] ?? 0) - (centered ? h/2 : 0) → 平移到 baseZ + h/2。\n  const baseX = params.at?.[0] ?? 0\n  const baseY = params.at?.[1] ?? 0\n  const baseZ = (params.at?.[2] ?? 0) - (params.centered === true ? params.height / 2 : 0)\n  geo.translate(baseX, baseY, baseZ + params.height / 2)\n  // 面结构（P4 面级）：CylinderGeometry 三角形布局稳定——侧面 2*segs（tri 0..2segs-1）、\n  // 顶盖 segs、底盖 segs。面序号契约：0=侧面, 1=顶, 2=底。\n  const faceRanges: Shape['faceRanges'] = [\n    { start: 0, count: 2 * segs },\n    { start: 2 * segs, count: segs },\n    { start: 3 * segs, count: segs },\n  ]\n  return geoToShape(geo, faceRanges)\n}\n\n/**\n * Create a cone, or a frustum when the top and bottom radii differ\n * (`cone(bottomRadius, topRadius, height, { at?, centered?, segments? })` brepjs\n * 契约，§4.1 P 决策；与 brep 路径逐点对齐）。\n *\n * 锚点：`at` 是**底面轴心**（BASE）语义（默认 [0,0,0]，底面在原点、+Z 延伸）；\n * `centered:true` 指底面落到 −h/2（无 at 时居中到原点）——与 `at` 同给时以\n * `at` 为中心。`segments` 经 clampNRad 消费（P0 §5）。\n *\n * @param params - cone parameters (radiusBottom, radiusTop, height, optional at/centered/segments).\n * @returns the cone shape.\n */\nexport function cone(params: ConeParams): Shape {\n  const segs = clampNRad(params.nRad ?? params.segments)\n  const geo = new THREE.ConeGeometry(\n    Math.max(params.radiusBottom, params.radiusTop),\n    params.height,\n    segs,\n  )\n  geo.applyMatrix4(new THREE.Matrix4().makeRotationX(Math.PI / 2))\n  // radiusTop === 0 → 尖锥（ConeGeometry 顶点在顶）；其余（含 radiusTop ===\n  // radiusBottom 的等径圆柱/圆台）用 CylinderGeometry（radiusTop/bottom 各就各位）。\n  let resultGeo: THREE.BufferGeometry\n  if (params.radiusTop === 0) {\n    resultGeo = geo\n  } else {\n    const geo2 = new THREE.CylinderGeometry(\n      params.radiusTop,\n      params.radiusBottom,\n      params.height,\n      segs,\n    )\n    geo2.applyMatrix4(new THREE.Matrix4().makeRotationX(Math.PI / 2))\n    resultGeo = geo2\n  }\n  // geometry（rotateX 后）沿 z ∈ [-h/2, +h/2]（three 默认 Y-up 居中）：\n  // 目标底面中心 in baseZ = (at?.[2] ?? 0) - (centered ? h/2 : 0) → 平坦平移 baseZ + h/2。\n  const baseX = params.at?.[0] ?? 0\n  const baseY = params.at?.[1] ?? 0\n  const baseZ = (params.at?.[2] ?? 0) - (params.centered === true ? params.height / 2 : 0)\n  resultGeo.translate(baseX, baseY, baseZ + params.height / 2)\n  // 面结构（P4 面级）：radiusTop=0 的 ConeGeometry 只有 2 面——侧面（segs 个\n  // 三角扇）+ 底盖（segs 个）；radiusTop>0 的圆台 CylinderGeometry 3 面\n  // （侧面 2*segs、顶、底，同 cylinder 布局）。面序号契约：0=侧面, 1=底\n  // （尖锥）；0=侧面, 1=顶, 2=底（圆台）。\n  const faceRanges: Shape['faceRanges'] =\n    params.radiusTop === 0\n      ? [\n          { start: 0, count: segs },\n          { start: segs, count: segs },\n        ]\n      : [\n          { start: 0, count: 2 * segs },\n          { start: 2 * segs, count: segs },\n          { start: 3 * segs, count: segs },\n        ]\n  return geoToShape(resultGeo, faceRanges)\n}\n\n/**\n * Create a wedge (ramp) solid, fully parameterized and Z-up.\n *\n * @param params - wedge parameters (width, height, angle, length, optional center).\n * @returns the wedge shape.\n */\nexport function wedge(params: WedgeParams): Shape {\n  const width = params.width\n  const height = params.height\n  const angle = params.angle\n  const length = params.length\n\n  const angleRad = (angle * Math.PI) / 180\n  const halfExtrude = length / 2\n  const hw = width / 2\n  const halfTopWidth = Math.max(0, hw - height / Math.tan(angleRad))\n  // 顶边塌缩（斜坡已在宽度内到顶）→ 三角棱柱（与 brep wedge 的退化处理一致，\n  // 保证 mesh/brep 同参数 bbox 一致；零面积三角形会破坏 manifold）。\n  const degenerate = halfTopWidth <= 1e-12\n\n  const positions = degenerate\n    ? new Float32Array([\n        -halfExtrude, -hw, 0,\n        -halfExtrude,  hw, 0,\n        -halfExtrude,   0, height,\n         halfExtrude, -hw, 0,\n         halfExtrude,  hw, 0,\n         halfExtrude,   0, height,\n      ])\n    : new Float32Array([\n        -halfExtrude, -hw, 0,\n        -halfExtrude,  hw, 0,\n        -halfExtrude,  halfTopWidth, height,\n        -halfExtrude, -halfTopWidth, height,\n         halfExtrude, -hw, 0,\n         halfExtrude,  hw, 0,\n         halfExtrude,  halfTopWidth, height,\n         halfExtrude, -halfTopWidth, height,\n      ])\n\n  const indices = degenerate\n    ? new Uint32Array([\n        0, 1, 2,  3, 5, 4,\n        0, 3, 4,  0, 4, 1,\n        0, 2, 5,  0, 5, 3,\n        1, 4, 5,  1, 5, 2,\n      ])\n    : new Uint32Array([\n        0, 1, 2,  0, 2, 3,\n        4, 6, 5,  4, 7, 6,\n        0, 4, 5,  0, 5, 1,\n        3, 2, 6,  3, 6, 7,\n        0, 3, 7,  0, 7, 4,\n        1, 5, 6,  1, 6, 2,\n      ])\n\n  const geo = new THREE.BufferGeometry()\n  geo.setAttribute('position', new THREE.BufferAttribute(positions, 3))\n  geo.setIndex(new THREE.BufferAttribute(indices, 1))\n\n  if (params.center) {\n    geo.translate(params.center[0], params.center[1], params.center[2])\n  }\n  return geoToShape(geo)\n}\n\n/**\n * Create a screw (threaded) geometry.\n *\n * @param params - screw parameters (system, specIdx, thread, length, head, optional pitchCustom and nRad).\n * @returns the screw shape.\n */\nexport async function screw(params: {\n  system: 'metric' | 'imperial'\n  specIdx: number\n  thread: 'coarse' | 'fine' | 'custom' | 'none'\n  pitchCustom?: number\n  length: number\n  head: 'hex' | 'chc' | 'none'\n  nRad?: number\n}): Promise<Shape> {\n  const { makeScrew } = await import('../primitives/screw/screw')\n  const geo = makeScrew({\n    system: params.system,\n    specIdx: params.specIdx,\n    thread: params.thread,\n    pitchCustom: params.pitchCustom ?? 0,\n    length: params.length,\n    head: params.head,\n    nRad: clampNRad(params.nRad),\n  })\n  return geoToShape(geo)\n}\n\n/**\n * Create a mesh from SDF (signed distance field) code, sampling the field with\n * marching cubes.\n *\n * @param params - SDF parameters (code, optional bounds, params, resolution).\n * @returns the sampled shape.\n */\nexport async function sdf(params: SdfParams): Promise<Shape> {\n  const { runSdf } = await import('../sdf/sdf-runner')\n  const box = params.box ?? [[-10, -10, -10], [10, 10, 10]]\n  const bounds: [number, number, number, number, number, number] = [\n    box[0][0], box[0][1], box[0][2],\n    box[1][0], box[1][1], box[1][2],\n  ]\n  const mesh = await runSdf(\n    params.code,\n    params.params ?? {},\n    bounds,\n    params.resolution ?? 1.0,\n  )\n  return { positions: mesh.positions, indices: mesh.indices }\n}\n"]}
+{"version":3,"file":"primitives.js","sourceRoot":"","sources":["../../src/mesh/primitives.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;GAaG;AAEH,OAAO,KAAK,KAAK,MAAM,OAAO,CAAA;AAC9B,OAAO,EAAE,gBAAgB,EAAE,MAAM,+BAA+B,CAAA;AAChE,OAAO,EAAE,iBAAiB,EAAE,MAAM,wBAAwB,CAAA;AAE1D,OAAO,EAAE,SAAS,EAAE,MAAM,SAAS,CAAA;AAEnC,aAAa;AAEb,kEAAkE;AAClE,SAAS,UAAU,CAAC,GAAyB,EAAE,UAAgC;IAC7E,MAAM,KAAK,GAAG,iBAAiB,CAAC,GAAG,CAAU,CAAA;IAC7C,IAAI,UAAU,KAAK,SAAS;QAAE,KAAK,CAAC,UAAU,GAAG,UAAU,CAAA;IAC3D,OAAO,KAAK,CAAA;AACd,CAAC;AAED,eAAe;AAEf;;;;;;;;;;;GAWG;AACH,MAAM,UAAU,GAAG,CAAC,MAAiB;IACnC,MAAM,EAAE,KAAK,EAAE,KAAK,EAAE,MAAM,EAAE,GAAG,MAAM,CAAA;IACvC,6EAA6E;IAC7E,yEAAyE;IACzE,yEAAyE;IACzE,MAAM,GAAG,GAAG,IAAI,KAAK,CAAC,WAAW,CAAC,KAAK,EAAE,MAAM,EAAE,KAAK,CAAC,CAAA;IACvD,GAAG,CAAC,YAAY,CAAC,IAAI,KAAK,CAAC,OAAO,EAAE,CAAC,aAAa,CAAC,IAAI,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAA;IAChE,+EAA+E;IAC/E,kEAAkE;IAClE,MAAM,EAAE,GAAG,MAAM,CAAC,EAAE,CAAA;IACpB,IAAI,EAAE,GAAG,CAAC,CAAA;IACV,IAAI,EAAE,GAAG,CAAC,CAAA;IACV,IAAI,EAAE,GAAG,CAAC,CAAA;IACV,IAAI,EAAE,KAAK,SAAS,EAAE,CAAC;QACrB,CAAC;QAAA,CAAC,EAAE,EAAE,EAAE,EAAE,EAAE,CAAC,GAAG,EAAE,CAAA;IACpB,CAAC;SAAM,IAAI,CAAC,MAAM,CAAC,QAAQ,EAAE,CAAC;QAC5B,EAAE,GAAG,KAAK,GAAG,CAAC,CAAA;QACd,EAAE,GAAG,KAAK,GAAG,CAAC,CAAA;QACd,EAAE,GAAG,MAAM,GAAG,CAAC,CAAA;IACjB,CAAC;IACD,IAAI,EAAE,KAAK,CAAC,IAAI,EAAE,KAAK,CAAC,IAAI,EAAE,KAAK,CAAC;QAAE,GAAG,CAAC,SAAS,CAAC,EAAE,EAAE,EAAE,EAAE,EAAE,CAAC,CAAA;IAC/D,+CAA+C;IAC/C,gEAAgE;IAChE,yEAAyE;IACzE,MAAM,UAAU,GAAwB;QACtC,EAAE,KAAK,EAAE,CAAC,EAAE,KAAK,EAAE,CAAC,EAAE;QACtB,EAAE,KAAK,EAAE,CAAC,EAAE,KAAK,EAAE,CAAC,EAAE;QACtB,EAAE,KAAK,EAAE,CAAC,EAAE,KAAK,EAAE,CAAC,EAAE;QACtB,EAAE,KAAK,EAAE,CAAC,EAAE,KAAK,EAAE,CAAC,EAAE;QACtB,EAAE,KAAK,EAAE,CAAC,EAAE,KAAK,EAAE,CAAC,EAAE;QACtB,EAAE,KAAK,EAAE,EAAE,EAAE,KAAK,EAAE,CAAC,EAAE;KACxB,CAAA;IACD,OAAO,UAAU,CAAC,GAAG,EAAE,UAAU,CAAC,CAAA;AACpC,CAAC;AAED;;;;;GAKG;AACH,MAAM,UAAU,MAAM,CAAC,MAAoB;IACzC,MAAM,IAAI,GAAG,SAAS,CAAC,MAAM,CAAC,IAAI,IAAI,MAAM,CAAC,QAAQ,CAAC,CAAA;IACtD,MAAM,GAAG,GAAG,gBAAgB,CAAC,QAAQ,EAAE,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,IAAI,CAAC,CAAA;IAC/D,IAAI,MAAM,CAAC,MAAM,EAAE,CAAC;QAClB,GAAG,CAAC,SAAS,CAAC,MAAM,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,MAAM,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,MAAM,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAA;IACrE,CAAC;IACD,OAAO,UAAU,CAAC,GAAG,CAAC,CAAA;AACxB,CAAC;AAED;;;;;;;;;;GAUG;AACH,MAAM,UAAU,QAAQ,CAAC,MAAsB;IAC7C,MAAM,IAAI,GAAG,SAAS,CAAC,MAAM,CAAC,IAAI,IAAI,MAAM,CAAC,QAAQ,CAAC,CAAA;IACtD,MAAM,GAAG,GAAG,IAAI,KAAK,CAAC,gBAAgB,CAAC,MAAM,CAAC,MAAM,EAAE,MAAM,CAAC,MAAM,EAAE,MAAM,CAAC,MAAM,EAAE,IAAI,CAAC,CAAA;IACzF,GAAG,CAAC,YAAY,CAAC,IAAI,KAAK,CAAC,OAAO,EAAE,CAAC,aAAa,CAAC,IAAI,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAA;IAChE,2DAA2D;IAC3D,6EAA6E;IAC7E,MAAM,KAAK,GAAG,MAAM,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAA;IACjC,MAAM,KAAK,GAAG,MAAM,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAA;IACjC,MAAM,KAAK,GAAG,CAAC,MAAM,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,MAAM,CAAC,QAAQ,KAAK,IAAI,CAAC,CAAC,CAAC,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAA;IACxF,GAAG,CAAC,SAAS,CAAC,KAAK,EAAE,KAAK,EAAE,KAAK,GAAG,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,CAAA;IACtD,kEAAkE;IAClE,wCAAwC;IACxC,MAAM,UAAU,GAAwB;QACtC,EAAE,KAAK,EAAE,CAAC,EAAE,KAAK,EAAE,CAAC,GAAG,IAAI,EAAE;QAC7B,EAAE,KAAK,EAAE,CAAC,GAAG,IAAI,EAAE,KAAK,EAAE,IAAI,EAAE;QAChC,EAAE,KAAK,EAAE,CAAC,GAAG,IAAI,EAAE,KAAK,EAAE,IAAI,EAAE;KACjC,CAAA;IACD,OAAO,UAAU,CAAC,GAAG,EAAE,UAAU,CAAC,CAAA;AACpC,CAAC;AAED;;;;;;;;;;;GAWG;AACH,MAAM,UAAU,IAAI,CAAC,MAAkB;IACrC,MAAM,IAAI,GAAG,SAAS,CAAC,MAAM,CAAC,IAAI,IAAI,MAAM,CAAC,QAAQ,CAAC,CAAA;IACtD,MAAM,GAAG,GAAG,IAAI,KAAK,CAAC,YAAY,CAChC,IAAI,CAAC,GAAG,CAAC,MAAM,CAAC,YAAY,EAAE,MAAM,CAAC,SAAS,CAAC,EAC/C,MAAM,CAAC,MAAM,EACb,IAAI,CACL,CAAA;IACD,GAAG,CAAC,YAAY,CAAC,IAAI,KAAK,CAAC,OAAO,EAAE,CAAC,aAAa,CAAC,IAAI,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAA;IAChE,6DAA6D;IAC7D,mEAAmE;IACnE,IAAI,SAA+B,CAAA;IACnC,IAAI,MAAM,CAAC,SAAS,KAAK,CAAC,EAAE,CAAC;QAC3B,SAAS,GAAG,GAAG,CAAA;IACjB,CAAC;SAAM,CAAC;QACN,MAAM,IAAI,GAAG,IAAI,KAAK,CAAC,gBAAgB,CACrC,MAAM,CAAC,SAAS,EAChB,MAAM,CAAC,YAAY,EACnB,MAAM,CAAC,MAAM,EACb,IAAI,CACL,CAAA;QACD,IAAI,CAAC,YAAY,CAAC,IAAI,KAAK,CAAC,OAAO,EAAE,CAAC,aAAa,CAAC,IAAI,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAA;QACjE,SAAS,GAAG,IAAI,CAAA;IAClB,CAAC;IACD,2DAA2D;IAC3D,8EAA8E;IAC9E,MAAM,KAAK,GAAG,MAAM,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAA;IACjC,MAAM,KAAK,GAAG,MAAM,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAA;IACjC,MAAM,KAAK,GAAG,CAAC,MAAM,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,MAAM,CAAC,QAAQ,KAAK,IAAI,CAAC,CAAC,CAAC,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAA;IACxF,SAAS,CAAC,SAAS,CAAC,KAAK,EAAE,KAAK,EAAE,KAAK,GAAG,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,CAAA;IAC5D,0DAA0D;IAC1D,wDAAwD;IACxD,gDAAgD;IAChD,2BAA2B;IAC3B,MAAM,UAAU,GACd,MAAM,CAAC,SAAS,KAAK,CAAC;QACpB,CAAC,CAAC;YACE,EAAE,KAAK,EAAE,CAAC,EAAE,KAAK,EAAE,IAAI,EAAE;YACzB,EAAE,KAAK,EAAE,IAAI,EAAE,KAAK,EAAE,IAAI,EAAE;SAC7B;QACH,CAAC,CAAC;YACE,EAAE,KAAK,EAAE,CAAC,EAAE,KAAK,EAAE,CAAC,GAAG,IAAI,EAAE;YAC7B,EAAE,KAAK,EAAE,CAAC,GAAG,IAAI,EAAE,KAAK,EAAE,IAAI,EAAE;YAChC,EAAE,KAAK,EAAE,CAAC,GAAG,IAAI,EAAE,KAAK,EAAE,IAAI,EAAE;SACjC,CAAA;IACP,OAAO,UAAU,CAAC,SAAS,EAAE,UAAU,CAAC,CAAA;AAC1C,CAAC;AAED;;;;;GAKG;AACH,MAAM,UAAU,KAAK,CAAC,MAAmB;IACvC,MAAM,KAAK,GAAG,MAAM,CAAC,KAAK,CAAA;IAC1B,MAAM,MAAM,GAAG,MAAM,CAAC,MAAM,CAAA;IAC5B,MAAM,KAAK,GAAG,MAAM,CAAC,KAAK,CAAA;IAC1B,MAAM,MAAM,GAAG,MAAM,CAAC,MAAM,CAAA;IAE5B,MAAM,QAAQ,GAAG,CAAC,KAAK,GAAG,IAAI,CAAC,EAAE,CAAC,GAAG,GAAG,CAAA;IACxC,MAAM,WAAW,GAAG,MAAM,GAAG,CAAC,CAAA;IAC9B,MAAM,EAAE,GAAG,KAAK,GAAG,CAAC,CAAA;IACpB,MAAM,YAAY,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,EAAE,GAAG,MAAM,GAAG,IAAI,CAAC,GAAG,CAAC,QAAQ,CAAC,CAAC,CAAA;IAClE,8CAA8C;IAC9C,gDAAgD;IAChD,MAAM,UAAU,GAAG,YAAY,IAAI,KAAK,CAAA;IAExC,MAAM,SAAS,GAAG,UAAU;QAC1B,CAAC,CAAC,IAAI,YAAY,CAAC;YACf,CAAC,WAAW,EAAE,CAAC,EAAE,EAAE,CAAC;YACpB,CAAC,WAAW,EAAG,EAAE,EAAE,CAAC;YACpB,CAAC,WAAW,EAAI,CAAC,EAAE,MAAM;YACxB,WAAW,EAAE,CAAC,EAAE,EAAE,CAAC;YACnB,WAAW,EAAG,EAAE,EAAE,CAAC;YACnB,WAAW,EAAI,CAAC,EAAE,MAAM;SAC1B,CAAC;QACJ,CAAC,CAAC,IAAI,YAAY,CAAC;YACf,CAAC,WAAW,EAAE,CAAC,EAAE,EAAE,CAAC;YACpB,CAAC,WAAW,EAAG,EAAE,EAAE,CAAC;YACpB,CAAC,WAAW,EAAG,YAAY,EAAE,MAAM;YACnC,CAAC,WAAW,EAAE,CAAC,YAAY,EAAE,MAAM;YAClC,WAAW,EAAE,CAAC,EAAE,EAAE,CAAC;YACnB,WAAW,EAAG,EAAE,EAAE,CAAC;YACnB,WAAW,EAAG,YAAY,EAAE,MAAM;YAClC,WAAW,EAAE,CAAC,YAAY,EAAE,MAAM;SACpC,CAAC,CAAA;IAEN,MAAM,OAAO,GAAG,UAAU;QACxB,CAAC,CAAC,IAAI,WAAW,CAAC;YACd,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;YACjB,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;YACjB,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;YACjB,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;SAClB,CAAC;QACJ,CAAC,CAAC,IAAI,WAAW,CAAC;YACd,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;YACjB,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;YACjB,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;YACjB,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;YACjB,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;YACjB,CAAC,EAAE,CAAC,EAAE,CAAC,EAAG,CAAC,EAAE,CAAC,EAAE,CAAC;SAClB,CAAC,CAAA;IAEN,MAAM,GAAG,GAAG,IAAI,KAAK,CAAC,cAAc,EAAE,CAAA;IACtC,GAAG,CAAC,YAAY,CAAC,UAAU,EAAE,IAAI,KAAK,CAAC,eAAe,CAAC,SAAS,EAAE,CAAC,CAAC,CAAC,CAAA;IACrE,GAAG,CAAC,QAAQ,CAAC,IAAI,KAAK,CAAC,eAAe,CAAC,OAAO,EAAE,CAAC,CAAC,CAAC,CAAA;IAEnD,IAAI,MAAM,CAAC,MAAM,EAAE,CAAC;QAClB,GAAG,CAAC,SAAS,CAAC,MAAM,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,MAAM,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,MAAM,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAA;IACrE,CAAC;IACD,OAAO,UAAU,CAAC,GAAG,CAAC,CAAA;AACxB,CAAC;AAED;;;;;GAKG;AACH,MAAM,CAAC,KAAK,UAAU,KAAK,CAAC,MAQ3B;IACC,MAAM,EAAE,SAAS,EAAE,GAAG,MAAM,MAAM,CAAC,2BAA2B,CAAC,CAAA;IAC/D,MAAM,GAAG,GAAG,SAAS,CAAC;QACpB,MAAM,EAAE,MAAM,CAAC,MAAM;QACrB,OAAO,EAAE,MAAM,CAAC,OAAO;QACvB,MAAM,EAAE,MAAM,CAAC,MAAM;QACrB,WAAW,EAAE,MAAM,CAAC,WAAW,IAAI,CAAC;QACpC,MAAM,EAAE,MAAM,CAAC,MAAM;QACrB,IAAI,EAAE,MAAM,CAAC,IAAI;QACjB,IAAI,EAAE,SAAS,CAAC,MAAM,CAAC,IAAI,CAAC;KAC7B,CAAC,CAAA;IACF,OAAO,UAAU,CAAC,GAAG,CAAC,CAAA;AACxB,CAAC;AAED;;;;;;GAMG;AACH,MAAM,CAAC,KAAK,UAAU,GAAG,CAAC,MAAiB;IACzC,MAAM,EAAE,MAAM,EAAE,GAAG,MAAM,MAAM,CAAC,mBAAmB,CAAC,CAAA;IACpD,MAAM,GAAG,GAAG,MAAM,CAAC,GAAG,IAAI,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,EAAE,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,EAAE,EAAE,EAAE,EAAE,CAAC,CAAC,CAAA;IACzD,MAAM,MAAM,GAAqD;QAC/D,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;QAC/B,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;KAChC,CAAA;IACD,MAAM,IAAI,GAAG,MAAM,MAAM,CACvB,MAAM,CAAC,IAAI,EACX,MAAM,CAAC,MAAM,IAAI,EAAE,EACnB,MAAM,EACN,MAAM,CAAC,UAAU,IAAI,GAAG,CACzB,CAAA;IACD,OAAO,EAAE,SAAS,EAAE,IAAI,CAAC,SAAS,EAAE,OAAO,EAAE,IAAI,CAAC,OAAO,EAAE,CAAA;AAC7D,CAAC","sourcesContent":["/**\n * mesh 基本体 API — 从现有纯函数提取的统一接口\n *\n * 提取来源（§5.7）：\n * - box/sphere/cylinder/cone/wedge ← engine/primitives/mesh-primitives.ts (makePrimitiveGeo)\n * - screw ← engine/primitives/screw/screw.ts (makeScrew)\n *\n * `text` / `svgExtrude`（three 的 Shape / ExtrudeGeometry / SVGLoader 链）已随\n * B 组迁到 `@faicad/faijs-extra` 的 `mesh/primitives.ts`，core 的 mesh 面不再\n * 承载 three 的非基础几何生成链。\n *\n * 所有函数返回 Shape (ManifoldMeshData)：THREE.BufferGeometry → geoToManifoldMesh 转换。\n * 坐标系：Z-up、毫米。\n */\n\nimport * as THREE from 'three'\nimport { makePrimitiveGeo } from '../primitives/mesh-primitives'\nimport { geoToManifoldMesh } from '../boolean/csg-backend'\nimport type { Shape, BoxParams, SphereParams, CylinderParams, ConeParams, WedgeParams, SdfParams } from './types'\nimport { clampNRad } from './types'\n\n// ── 内部工具 ──\n\n/** THREE.BufferGeometry → Shape (ManifoldMeshData)；可选携带面结构元数据。 */\nfunction geoToShape(geo: THREE.BufferGeometry, faceRanges?: Shape['faceRanges']): Shape {\n  const shape = geoToManifoldMesh(geo) as Shape\n  if (faceRanges !== undefined) shape.faceRanges = faceRanges\n  return shape\n}\n\n// ── 创建 API ──\n\n/**\n * Create a box solid (brepjs contract, §4.1 A 决策).\n *\n * `box(width, depth, height)` — X=width, Y=depth, Z=height — places the\n * min-corner at the origin by default (`centered:false`). `centered: true`\n * centers the box at the origin; `at` is CENTER semantics and takes precedence\n * over `centered`. The `segments` option is consumed by the tessellation\n * caller (this mesh builder keeps it via clampNRad when present).\n *\n * @param params - box parameters (width/depth/height, optional at/centered/segments).\n * @returns the box shape.\n */\nexport function box(params: BoxParams): Shape {\n  const { width, depth, height } = params\n  // THREE.BoxGeometry(a, b, c) is Y-up (X=a, Y=b, Z=c); after the +90° rotateX\n  // the dims map to X=a, Y=c, Z=b. To reach X=width, Y=depth, Z=height the\n  // pre-rotation sizes must be (width, height, depth) — 裁决 7 xyz contract.\n  const geo = new THREE.BoxGeometry(width, height, depth)\n  geo.applyMatrix4(new THREE.Matrix4().makeRotationX(Math.PI / 2))\n  // 原 brepjs box semantics: corner at origin by default; centered at origin when\n  // `centered` (no `at`); `at` (CENTER semantics) takes precedence.\n  const at = params.at\n  let tx = 0\n  let ty = 0\n  let tz = 0\n  if (at !== undefined) {\n    ;[tx, ty, tz] = at\n  } else if (!params.centered) {\n    tx = width / 2\n    ty = depth / 2\n    tz = height / 2\n  }\n  if (tx !== 0 || ty !== 0 || tz !== 0) geo.translate(tx, ty, tz)\n  // 面结构（P4 面级）：BoxGeometry 12 三角形 = 6 面 × 2，顺序固定\n  // (+X, −X, +Y, −Y, +Z, −Z)；geoToManifoldMesh 焊接顶点保三角形序，故面序契约成立。\n  // 面序号契约（setFaceColor 的 faceIds 即此序号）：0=+X, 1=−X, 2=+Y, 3=−Y, 4=+Z, 5=−Z。\n  const faceRanges: Shape['faceRanges'] = [\n    { start: 0, count: 2 },\n    { start: 2, count: 2 },\n    { start: 4, count: 2 },\n    { start: 6, count: 2 },\n    { start: 8, count: 2 },\n    { start: 10, count: 2 },\n  ]\n  return geoToShape(geo, faceRanges)\n}\n\n/**\n * Create a sphere centered at the origin (or the optional `center`).\n *\n * @param params - sphere parameters (radius, optional segments, optional center).\n * @returns the sphere shape.\n */\nexport function sphere(params: SphereParams): Shape {\n  const segs = clampNRad(params.nRad ?? params.segments)\n  const geo = makePrimitiveGeo('sphere', params.radius * 2, segs)\n  if (params.center) {\n    geo.translate(params.center[0], params.center[1], params.center[2])\n  }\n  return geoToShape(geo)\n}\n\n/**\n * Create a cylinder along +Z (`cylinder(radius, height, { at?, centered?,\n * segments? })` brepjs 契约，§4.3 A 决策；与 brep 路径逐点对齐）。\n *\n * 锚点：`at` 是**底面轴心**（BASE）语义（默认 [0,0,0]，底面在原点、+Z 延伸）；\n * `centered:true` 指底面落到 −h/2（无 at 时居中到原点）——与 `at` 同给时以\n * `at` 为中心。`segments` 经 clampNRad 消费（P0 §5）。\n *\n * @param params - cylinder parameters (radius, height, optional at/centered/segments).\n * @returns the cylinder shape.\n */\nexport function cylinder(params: CylinderParams): Shape {\n  const segs = clampNRad(params.nRad ?? params.segments)\n  const geo = new THREE.CylinderGeometry(params.radius, params.radius, params.height, segs)\n  geo.applyMatrix4(new THREE.Matrix4().makeRotationX(Math.PI / 2))\n  // geometry（rotateX 后）沿 z ∈ [-h/2, +h/2]（three 默认 Y-up 居中）：\n  // 目标底面中心 in baseZ = (at?.[2] ?? 0) - (centered ? h/2 : 0) → 平移到 baseZ + h/2。\n  const baseX = params.at?.[0] ?? 0\n  const baseY = params.at?.[1] ?? 0\n  const baseZ = (params.at?.[2] ?? 0) - (params.centered === true ? params.height / 2 : 0)\n  geo.translate(baseX, baseY, baseZ + params.height / 2)\n  // 面结构（P4 面级）：CylinderGeometry 三角形布局稳定——侧面 2*segs（tri 0..2segs-1）、\n  // 顶盖 segs、底盖 segs。面序号契约：0=侧面, 1=顶, 2=底。\n  const faceRanges: Shape['faceRanges'] = [\n    { start: 0, count: 2 * segs },\n    { start: 2 * segs, count: segs },\n    { start: 3 * segs, count: segs },\n  ]\n  return geoToShape(geo, faceRanges)\n}\n\n/**\n * Create a cone, or a frustum when the top and bottom radii differ\n * (`cone(bottomRadius, topRadius, height, { at?, centered?, segments? })` brepjs\n * 契约，§4.1 P 决策；与 brep 路径逐点对齐）。\n *\n * 锚点：`at` 是**底面轴心**（BASE）语义（默认 [0,0,0]，底面在原点、+Z 延伸）；\n * `centered:true` 指底面落到 −h/2（无 at 时居中到原点）——与 `at` 同给时以\n * `at` 为中心。`segments` 经 clampNRad 消费（P0 §5）。\n *\n * @param params - cone parameters (radiusBottom, radiusTop, height, optional at/centered/segments).\n * @returns the cone shape.\n */\nexport function cone(params: ConeParams): Shape {\n  const segs = clampNRad(params.nRad ?? params.segments)\n  const geo = new THREE.ConeGeometry(\n    Math.max(params.radiusBottom, params.radiusTop),\n    params.height,\n    segs,\n  )\n  geo.applyMatrix4(new THREE.Matrix4().makeRotationX(Math.PI / 2))\n  // radiusTop === 0 → 尖锥（ConeGeometry 顶点在顶）；其余（含 radiusTop ===\n  // radiusBottom 的等径圆柱/圆台）用 CylinderGeometry（radiusTop/bottom 各就各位）。\n  let resultGeo: THREE.BufferGeometry\n  if (params.radiusTop === 0) {\n    resultGeo = geo\n  } else {\n    const geo2 = new THREE.CylinderGeometry(\n      params.radiusTop,\n      params.radiusBottom,\n      params.height,\n      segs,\n    )\n    geo2.applyMatrix4(new THREE.Matrix4().makeRotationX(Math.PI / 2))\n    resultGeo = geo2\n  }\n  // geometry（rotateX 后）沿 z ∈ [-h/2, +h/2]（three 默认 Y-up 居中）：\n  // 目标底面中心 in baseZ = (at?.[2] ?? 0) - (centered ? h/2 : 0) → 平坦平移 baseZ + h/2。\n  const baseX = params.at?.[0] ?? 0\n  const baseY = params.at?.[1] ?? 0\n  const baseZ = (params.at?.[2] ?? 0) - (params.centered === true ? params.height / 2 : 0)\n  resultGeo.translate(baseX, baseY, baseZ + params.height / 2)\n  // 面结构（P4 面级）：radiusTop=0 的 ConeGeometry 只有 2 面——侧面（segs 个\n  // 三角扇）+ 底盖（segs 个）；radiusTop>0 的圆台 CylinderGeometry 3 面\n  // （侧面 2*segs、顶、底，同 cylinder 布局）。面序号契约：0=侧面, 1=底\n  // （尖锥）；0=侧面, 1=顶, 2=底（圆台）。\n  const faceRanges: Shape['faceRanges'] =\n    params.radiusTop === 0\n      ? [\n          { start: 0, count: segs },\n          { start: segs, count: segs },\n        ]\n      : [\n          { start: 0, count: 2 * segs },\n          { start: 2 * segs, count: segs },\n          { start: 3 * segs, count: segs },\n        ]\n  return geoToShape(resultGeo, faceRanges)\n}\n\n/**\n * Create a wedge (ramp) solid, fully parameterized and Z-up.\n *\n * @param params - wedge parameters (width, height, angle, length, optional center).\n * @returns the wedge shape.\n */\nexport function wedge(params: WedgeParams): Shape {\n  const width = params.width\n  const height = params.height\n  const angle = params.angle\n  const length = params.length\n\n  const angleRad = (angle * Math.PI) / 180\n  const halfExtrude = length / 2\n  const hw = width / 2\n  const halfTopWidth = Math.max(0, hw - height / Math.tan(angleRad))\n  // 顶边塌缩（斜坡已在宽度内到顶）→ 三角棱柱（与 brep wedge 的退化处理一致，\n  // 保证 mesh/brep 同参数 bbox 一致；零面积三角形会破坏 manifold）。\n  const degenerate = halfTopWidth <= 1e-12\n\n  const positions = degenerate\n    ? new Float32Array([\n        -halfExtrude, -hw, 0,\n        -halfExtrude,  hw, 0,\n        -halfExtrude,   0, height,\n         halfExtrude, -hw, 0,\n         halfExtrude,  hw, 0,\n         halfExtrude,   0, height,\n      ])\n    : new Float32Array([\n        -halfExtrude, -hw, 0,\n        -halfExtrude,  hw, 0,\n        -halfExtrude,  halfTopWidth, height,\n        -halfExtrude, -halfTopWidth, height,\n         halfExtrude, -hw, 0,\n         halfExtrude,  hw, 0,\n         halfExtrude,  halfTopWidth, height,\n         halfExtrude, -halfTopWidth, height,\n      ])\n\n  const indices = degenerate\n    ? new Uint32Array([\n        0, 1, 2,  3, 5, 4,\n        0, 3, 4,  0, 4, 1,\n        0, 2, 5,  0, 5, 3,\n        1, 4, 5,  1, 5, 2,\n      ])\n    : new Uint32Array([\n        0, 1, 2,  0, 2, 3,\n        4, 6, 5,  4, 7, 6,\n        0, 4, 5,  0, 5, 1,\n        3, 2, 6,  3, 6, 7,\n        0, 3, 7,  0, 7, 4,\n        1, 5, 6,  1, 6, 2,\n      ])\n\n  const geo = new THREE.BufferGeometry()\n  geo.setAttribute('position', new THREE.BufferAttribute(positions, 3))\n  geo.setIndex(new THREE.BufferAttribute(indices, 1))\n\n  if (params.center) {\n    geo.translate(params.center[0], params.center[1], params.center[2])\n  }\n  return geoToShape(geo)\n}\n\n/**\n * Create a screw (threaded) geometry.\n *\n * @param params - screw parameters (system, specIdx, thread, length, head, optional pitchCustom and nRad).\n * @returns the screw shape.\n */\nexport async function screw(params: {\n  system: 'metric' | 'imperial'\n  specIdx: number\n  thread: 'coarse' | 'fine' | 'custom' | 'none'\n  pitchCustom?: number\n  length: number\n  head: 'hex' | 'chc' | 'none'\n  nRad?: number\n}): Promise<Shape> {\n  const { makeScrew } = await import('../primitives/screw/screw')\n  const geo = makeScrew({\n    system: params.system,\n    specIdx: params.specIdx,\n    thread: params.thread,\n    pitchCustom: params.pitchCustom ?? 0,\n    length: params.length,\n    head: params.head,\n    nRad: clampNRad(params.nRad),\n  })\n  return geoToShape(geo)\n}\n\n/**\n * Create a mesh from SDF (signed distance field) code, sampling the field with\n * marching cubes.\n *\n * @param params - SDF parameters (code, optional bounds, params, resolution).\n * @returns the sampled shape.\n */\nexport async function sdf(params: SdfParams): Promise<Shape> {\n  const { runSdf } = await import('../sdf/sdf-runner')\n  const box = params.box ?? [[-10, -10, -10], [10, 10, 10]]\n  const bounds: [number, number, number, number, number, number] = [\n    box[0][0], box[0][1], box[0][2],\n    box[1][0], box[1][1], box[1][2],\n  ]\n  const mesh = await runSdf(\n    params.code,\n    params.params ?? {},\n    bounds,\n    params.resolution ?? 1.0,\n  )\n  return { positions: mesh.positions, indices: mesh.indices }\n}\n"]}

package/dist/mesh/threemf-bambu.d.ts

@@ -89,7 +89,15 @@ export interface Bambu3mfMetadata {
     filamentColors: string[];
     filamentTypes: string[];
     objects: Map<string, BambuObjectMeta>;
+    /** 打印单元表（序 = build items × 父对象 components = 叶子实例序）。 */
     parts: BambuPartMeta[];
+    /**
+     * P4：叶子实例（3MF `<object id>`，含子文件内局部 id）→ Bambu 身份。
+     * 键 = `${父objectId}:${componentIndex}`（ThreemfObject.parentObjectId/
+     * componentIndex 同源）；3MF object id 与 model_settings id 两套编号，
+     * 必须经父对象 components 关联。
+     */
+    leafParts: Map<string, BambuPartMeta>;
     plates: Map<number, BambuPlateInfo>;
     modelMeta?: BambuModelMeta;
     metadataEntries: Array<{
@@ -130,9 +138,12 @@ export declare function extractThumbnailBytes(entries: Map<string, Uint8Array>):
  *
  * @param extraEntries - the 3MF entry table excluding the geometry model shared
  *   with `parseThreemf` (project_settings / model_settings configs + thumbnails).
+ * @param modelXml - P4：根 model 文档（3D/3dmodel.model）XML；3MF 标准把
+ *   `<build>` 放在 `<resources>` 前，必须全量解析。缺省时回退到
+ *   extraEntries 里查找（兼容旧调用方）。
  * @returns the resolved `Bambu3mfMetadata`.
  */
-export declare function parseBambu3mfFromEntries(extraEntries: Map<string, Uint8Array>): Bambu3mfMetadata;
+export declare function parseBambu3mfFromEntries(extraEntries: Map<string, Uint8Array>, modelXml?: string): Bambu3mfMetadata;
 /** Parse Bambu metadata from a `ThreemfArchive`'s `extraEntries`.
  *
  * @param archive - a `ThreemfArchive` produced by `parseThreemf`.

package/dist/mesh/threemf-bambu.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"threemf-bambu.d.ts","sourceRoot":"","sources":["../../src/mesh/threemf-bambu.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;GAoBG;AACH,OAAO,KAAK,EAAE,cAAc,EAAE,MAAM,kBAAkB,CAAA;AAItD;;;;;GAKG;AACH,wBAAgB,cAAc,CAAC,IAAI,EAAE,MAAM,GAAG,MAAM,CASnD;AAED,qEAAqE;AACrE,MAAM,WAAW,eAAe;IAC9B,QAAQ,EAAE,MAAM,CAAA;IAChB,IAAI,EAAE,MAAM,CAAA;IACZ,QAAQ,EAAE,MAAM,CAAA;IAChB,OAAO,EAAE,MAAM,CAAA;CAChB;AAED,0EAA0E;AAC1E,MAAM,WAAW,aAAa;IAC5B,SAAS,EAAE,MAAM,CAAA;IACjB,QAAQ,EAAE,MAAM,CAAA;IAChB,MAAM,EAAE,MAAM,CAAA;IACd,IAAI,EAAE,MAAM,CAAA;IACZ,QAAQ,EAAE,MAAM,CAAA;IAChB,OAAO,EAAE,MAAM,CAAA;CAChB;AAED,uDAAuD;AACvD,MAAM,WAAW,cAAc;IAC7B,KAAK,EAAE,MAAM,CAAA;IACb,KAAK,EAAE,MAAM,CAAA;IACb,MAAM,EAAE,MAAM,CAAA;CACf;AAED,wEAAwE;AACxE,MAAM,WAAW,cAAc;IAC7B,OAAO,EAAE,MAAM,CAAA;IACf,SAAS,EAAE,MAAM,CAAA;IACjB,IAAI,CAAC,EAAE,cAAc,CAAA;CACtB;AAED,6EAA6E;AAC7E,MAAM,WAAW,cAAc;IAC7B,KAAK,CAAC,EAAE,MAAM,CAAA;IACd,QAAQ,CAAC,EAAE,MAAM,CAAA;IACjB,WAAW,CAAC,EAAE,MAAM,CAAA;IACpB,OAAO,CAAC,EAAE,MAAM,CAAA;CACjB;AAED,2EAA2E;AAC3E,MAAM,WAAW,SAAS;IACxB,QAAQ,EAAE,MAAM,CAAA;IAChB,SAAS,EAAE,MAAM,EAAE,GAAG,IAAI,CAAA;CAC3B;AAED,uEAAuE;AACvE,MAAM,WAAW,qBAAqB;IACpC,QAAQ,EAAE,MAAM,CAAA;IAChB,qEAAqE;IACrE,SAAS,EAAE,MAAM,EAAE,CAAA;IACnB,qDAAqD;IACrD,MAAM,EAAE,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,CAAA;CACjC;AAED,sEAAsE;AACtE,MAAM,WAAW,mBAAmB;IAClC,QAAQ,EAAE,MAAM,CAAA;IAChB,MAAM,EAAE,MAAM,CAAA;IACd,uCAAuC;IACvC,MAAM,EAAE,MAAM,EAAE,CAAA;IAChB,4CAA4C;IAC5C,YAAY,EAAE,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,CAAA;CACvC;AAED,4EAA4E;AAC5E,MAAM,WAAW,gBAAgB;IAC/B,cAAc,EAAE,MAAM,EAAE,CAAA;IACxB,aAAa,EAAE,MAAM,EAAE,CAAA;IACvB,OAAO,EAAE,GAAG,CAAC,MAAM,EAAE,eAAe,CAAC,CAAA;IACrC,KAAK,EAAE,aAAa,EAAE,CAAA;IACtB,MAAM,EAAE,GAAG,CAAC,MAAM,EAAE,cAAc,CAAC,CAAA;IACnC,SAAS,CAAC,EAAE,cAAc,CAAA;IAC1B,eAAe,EAAE,KAAK,CAAC;QAAE,IAAI,EAAE,MAAM,CAAC;QAAC,KAAK,EAAE,MAAM,CAAA;KAAE,CAAC,CAAA;IACvD,yDAAyD;IACzD,cAAc,CAAC,EAAE,UAAU,CAAA;IAC3B,kBAAkB,CAAC,EAAE,GAAG,CAAC,MAAM,EAAE,qBAAqB,CAAC,CAAA;IACvD,gBAAgB,CAAC,EAAE,GAAG,CAAC,MAAM,EAAE,mBAAmB,CAAC,CAAA;IACnD,UAAU,CAAC,EAAE,SAAS,EAAE,CAAA;CACzB;AAED;;;;GAIG;AACH,wBAAgB,aAAa,CAAC,GAAG,EAAE,MAAM,GAAG,SAAS,EAAE,CAWtD;AAED;;;;GAIG;AACH,wBAAgB,cAAc,CAAC,GAAG,EAAE,MAAM,GAAG;IAC3C,SAAS,EAAE,cAAc,GAAG,SAAS,CAAA;IACrC,eAAe,EAAE,KAAK,CAAC;QAAE,IAAI,EAAE,MAAM,CAAC;QAAC,KAAK,EAAE,MAAM,CAAA;KAAE,CAAC,CAAA;CACxD,CAeA;AAUD;;;;GAIG;AACH,wBAAgB,qBAAqB,CACnC,OAAO,EAAE,GAAG,CAAC,MAAM,EAAE,UAAU,CAAC,GAC/B,UAAU,GAAG,SAAS,CASxB;AAED;;;;;GAKG;AACH,wBAAgB,wBAAwB,CACtC,YAAY,EAAE,GAAG,CAAC,MAAM,EAAE,UAAU,CAAC,GACpC,gBAAgB,CAsOlB;AAED;;;;GAIG;AACH,wBAAgB,wBAAwB,CAAC,OAAO,EAAE,cAAc,GAAG,gBAAgB,CAElF"}
+{"version":3,"file":"threemf-bambu.d.ts","sourceRoot":"","sources":["../../src/mesh/threemf-bambu.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;GAoBG;AACH,OAAO,KAAK,EAAE,cAAc,EAAE,MAAM,kBAAkB,CAAA;AAItD;;;;;GAKG;AACH,wBAAgB,cAAc,CAAC,IAAI,EAAE,MAAM,GAAG,MAAM,CASnD;AAED,qEAAqE;AACrE,MAAM,WAAW,eAAe;IAC9B,QAAQ,EAAE,MAAM,CAAA;IAChB,IAAI,EAAE,MAAM,CAAA;IACZ,QAAQ,EAAE,MAAM,CAAA;IAChB,OAAO,EAAE,MAAM,CAAA;CAChB;AAED,0EAA0E;AAC1E,MAAM,WAAW,aAAa;IAC5B,SAAS,EAAE,MAAM,CAAA;IACjB,QAAQ,EAAE,MAAM,CAAA;IAChB,MAAM,EAAE,MAAM,CAAA;IACd,IAAI,EAAE,MAAM,CAAA;IACZ,QAAQ,EAAE,MAAM,CAAA;IAChB,OAAO,EAAE,MAAM,CAAA;CAChB;AAED,uDAAuD;AACvD,MAAM,WAAW,cAAc;IAC7B,KAAK,EAAE,MAAM,CAAA;IACb,KAAK,EAAE,MAAM,CAAA;IACb,MAAM,EAAE,MAAM,CAAA;CACf;AAED,wEAAwE;AACxE,MAAM,WAAW,cAAc;IAC7B,OAAO,EAAE,MAAM,CAAA;IACf,SAAS,EAAE,MAAM,CAAA;IACjB,IAAI,CAAC,EAAE,cAAc,CAAA;CACtB;AAED,6EAA6E;AAC7E,MAAM,WAAW,cAAc;IAC7B,KAAK,CAAC,EAAE,MAAM,CAAA;IACd,QAAQ,CAAC,EAAE,MAAM,CAAA;IACjB,WAAW,CAAC,EAAE,MAAM,CAAA;IACpB,OAAO,CAAC,EAAE,MAAM,CAAA;CACjB;AAED,2EAA2E;AAC3E,MAAM,WAAW,SAAS;IACxB,QAAQ,EAAE,MAAM,CAAA;IAChB,SAAS,EAAE,MAAM,EAAE,GAAG,IAAI,CAAA;CAC3B;AAED,uEAAuE;AACvE,MAAM,WAAW,qBAAqB;IACpC,QAAQ,EAAE,MAAM,CAAA;IAChB,qEAAqE;IACrE,SAAS,EAAE,MAAM,EAAE,CAAA;IACnB,qDAAqD;IACrD,MAAM,EAAE,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,CAAA;CACjC;AAED,sEAAsE;AACtE,MAAM,WAAW,mBAAmB;IAClC,QAAQ,EAAE,MAAM,CAAA;IAChB,MAAM,EAAE,MAAM,CAAA;IACd,uCAAuC;IACvC,MAAM,EAAE,MAAM,EAAE,CAAA;IAChB,4CAA4C;IAC5C,YAAY,EAAE,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,CAAA;CACvC;AAED,4EAA4E;AAC5E,MAAM,WAAW,gBAAgB;IAC/B,cAAc,EAAE,MAAM,EAAE,CAAA;IACxB,aAAa,EAAE,MAAM,EAAE,CAAA;IACvB,OAAO,EAAE,GAAG,CAAC,MAAM,EAAE,eAAe,CAAC,CAAA;IACrC,uDAAuD;IACvD,KAAK,EAAE,aAAa,EAAE,CAAA;IACtB;;;;;OAKG;IACH,SAAS,EAAE,GAAG,CAAC,MAAM,EAAE,aAAa,CAAC,CAAA;IACrC,MAAM,EAAE,GAAG,CAAC,MAAM,EAAE,cAAc,CAAC,CAAA;IACnC,SAAS,CAAC,EAAE,cAAc,CAAA;IAC1B,eAAe,EAAE,KAAK,CAAC;QAAE,IAAI,EAAE,MAAM,CAAC;QAAC,KAAK,EAAE,MAAM,CAAA;KAAE,CAAC,CAAA;IACvD,yDAAyD;IACzD,cAAc,CAAC,EAAE,UAAU,CAAA;IAC3B,kBAAkB,CAAC,EAAE,GAAG,CAAC,MAAM,EAAE,qBAAqB,CAAC,CAAA;IACvD,gBAAgB,CAAC,EAAE,GAAG,CAAC,MAAM,EAAE,mBAAmB,CAAC,CAAA;IACnD,UAAU,CAAC,EAAE,SAAS,EAAE,CAAA;CACzB;AAED;;;;GAIG;AACH,wBAAgB,aAAa,CAAC,GAAG,EAAE,MAAM,GAAG,SAAS,EAAE,CAWtD;AAED;;;;GAIG;AACH,wBAAgB,cAAc,CAAC,GAAG,EAAE,MAAM,GAAG;IAC3C,SAAS,EAAE,cAAc,GAAG,SAAS,CAAA;IACrC,eAAe,EAAE,KAAK,CAAC;QAAE,IAAI,EAAE,MAAM,CAAC;QAAC,KAAK,EAAE,MAAM,CAAA;KAAE,CAAC,CAAA;CACxD,CAeA;AAUD;;;;GAIG;AACH,wBAAgB,qBAAqB,CACnC,OAAO,EAAE,GAAG,CAAC,MAAM,EAAE,UAAU,CAAC,GAC/B,UAAU,GAAG,SAAS,CASxB;AAED;;;;;;;;GAQG;AACH,wBAAgB,wBAAwB,CACtC,YAAY,EAAE,GAAG,CAAC,MAAM,EAAE,UAAU,CAAC,EACrC,QAAQ,CAAC,EAAE,MAAM,GAChB,gBAAgB,CAoRlB;AAED;;;;GAIG;AACH,wBAAgB,wBAAwB,CAAC,OAAO,EAAE,cAAc,GAAG,gBAAgB,CAElF"}