@faicad/faijs 0.29.5 → 0.31.1

package/dist/api/generated/operations.d.ts

@@ -1,8 +1,8 @@
 /**
  * extrude — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * extrude(face: Shape, height: number|Vec3) → Shape｜extrude(face: Shape, params: { length? | upTo, normal?, mode?, baseFeature?, offset? }) → Shape
- * 桥接：defineOp({ brep: __own_extrudeBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_extrudeBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export declare const extrude: ((...args: unknown[]) => Promise<import("..").Shape>) & {
     __faijs__dualOp?: import("../../define-op.js").DualOpMeta;
@@ -10,8 +10,8 @@ export declare const extrude: ((...args: unknown[]) => Promise<import("..").Shap
 /**
  * revolve — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * revolve(face: Shape, options?: RevolveOptions): Shape
- * 桥接：defineOp({ brep: __own_revolveBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_revolveBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export declare const revolve: ((...args: unknown[]) => Promise<import("..").Shape>) & {
     __faijs__dualOp?: import("../../define-op.js").DualOpMeta;
@@ -19,8 +19,8 @@ export declare const revolve: ((...args: unknown[]) => Promise<import("..").Shap
 /**
  * sweep — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * sweep(wire: Shape, spine: Shape, config?: SweepOptions, shellMode?: boolean): Shape
- * 桥接：defineOp({ brep: __own_sweepBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_sweepBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export declare const sweep: ((...args: unknown[]) => Promise<import("..").Shape>) & {
     __faijs__dualOp?: import("../../define-op.js").DualOpMeta;
@@ -28,8 +28,8 @@ export declare const sweep: ((...args: unknown[]) => Promise<import("..").Shape>
 /**
  * complexExtrude — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * complexExtrude(wire: Shape, center: Vec3, normal: Vec3, profile?: ExtrusionProfile): Shape
- * 桥接：defineOp({ brep: __own_complexExtrudeBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_complexExtrudeBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export declare const complexExtrude: ((...args: unknown[]) => Promise<import("..").Shape>) & {
     __faijs__dualOp?: import("../../define-op.js").DualOpMeta;
@@ -37,8 +37,8 @@ export declare const complexExtrude: ((...args: unknown[]) => Promise<import("..
 /**
  * twistExtrude — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * twistExtrude(wire: Shape, angleDegrees: number, center: Vec3, normal: Vec3): Shape
- * 桥接：defineOp({ brep: __own_twistExtrudeBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_twistExtrudeBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export declare const twistExtrude: ((...args: unknown[]) => Promise<import("..").Shape>) & {
     __faijs__dualOp?: import("../../define-op.js").DualOpMeta;
@@ -46,8 +46,8 @@ export declare const twistExtrude: ((...args: unknown[]) => Promise<import("..")
 /**
  * linearPattern — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * linearPattern(shape: Shape, direction: Vec3, count: number, spacing: number): Shape
- * 桥接：defineOp({ brep: __own_linearPatternBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_linearPatternBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export declare const linearPattern: ((...args: unknown[]) => Promise<import("..").Shape>) & {
     __faijs__dualOp?: import("../../define-op.js").DualOpMeta;
@@ -55,8 +55,8 @@ export declare const linearPattern: ((...args: unknown[]) => Promise<import(".."
 /**
  * circularPattern — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * circularPattern(shape: Shape, axis: Vec3, count: number, fullAngle?: number, center?: Vec3): Shape
- * 桥接：defineOp({ brep: __own_circularPatternBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_circularPatternBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export declare const circularPattern: ((...args: unknown[]) => Promise<import("..").Shape>) & {
     __faijs__dualOp?: import("../../define-op.js").DualOpMeta;
@@ -64,8 +64,8 @@ export declare const circularPattern: ((...args: unknown[]) => Promise<import(".
 /**
  * gridPattern — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * gridPattern(shape: Shape, directionX: Vec3, directionY: Vec3, countX: number, countY: number, spacingX: number, spacingY: number): Shape
- * 桥接：defineOp({ brep: __own_gridPatternBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_gridPatternBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export declare const gridPattern: ((...args: unknown[]) => Promise<import("..").Shape>) & {
     __faijs__dualOp?: import("../../define-op.js").DualOpMeta;
@@ -73,8 +73,8 @@ export declare const gridPattern: ((...args: unknown[]) => Promise<import("..").
 /**
  * roof — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * roof(wire: Shape, options?: RoofOptions): Shape
- * 桥接：defineOp({ brep: __own_roofBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_roofBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export declare const roof: ((...args: unknown[]) => Promise<import("..").Shape>) & {
     __faijs__dualOp?: import("../../define-op.js").DualOpMeta;
@@ -82,8 +82,8 @@ export declare const roof: ((...args: unknown[]) => Promise<import("..").Shape>)
 /**
  * drill — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * drill(shape: Shape, options: DrillOptions): Shape
- * 桥接：defineOp({ brep: __own_drillBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_drillBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export declare const drill: ((...args: unknown[]) => Promise<import("..").Shape>) & {
     __faijs__dualOp?: import("../../define-op.js").DualOpMeta;
@@ -91,8 +91,8 @@ export declare const drill: ((...args: unknown[]) => Promise<import("..").Shape>
 /**
  * pocket — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * pocket(shape: Shape, options: PocketOptions): Shape
- * 桥接：defineOp({ brep: __own_pocketBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_pocketBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export declare const pocket: ((...args: unknown[]) => Promise<import("..").Shape>) & {
     __faijs__dualOp?: import("../../define-op.js").DualOpMeta;
@@ -100,8 +100,8 @@ export declare const pocket: ((...args: unknown[]) => Promise<import("..").Shape
 /**
  * boss — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * boss(shape: Shape, options: BossOptions): Shape
- * 桥接：defineOp({ brep: __own_bossBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_bossBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export declare const boss: ((...args: unknown[]) => Promise<import("..").Shape>) & {
     __faijs__dualOp?: import("../../define-op.js").DualOpMeta;
@@ -109,8 +109,8 @@ export declare const boss: ((...args: unknown[]) => Promise<import("..").Shape>)
 /**
  * mirrorJoin — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * mirrorJoin(shape: Shape, options?: MirrorJoinOptions): Shape
- * 桥接：defineOp({ brep: __own_mirrorJoinBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_mirrorJoinBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export declare const mirrorJoin: ((...args: unknown[]) => Promise<import("..").Shape>) & {
     __faijs__dualOp?: import("../../define-op.js").DualOpMeta;
@@ -118,8 +118,8 @@ export declare const mirrorJoin: ((...args: unknown[]) => Promise<import("..").S
 /**
  * rectangularPattern — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * rectangularPattern(shape: Shape, options: RectangularPatternOptions): Shape
- * 桥接：defineOp({ brep: __own_rectangularPatternBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_rectangularPatternBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export declare const rectangularPattern: ((...args: unknown[]) => Promise<import("..").Shape>) & {
     __faijs__dualOp?: import("../../define-op.js").DualOpMeta;
@@ -127,8 +127,8 @@ export declare const rectangularPattern: ((...args: unknown[]) => Promise<import
 /**
  * thread — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * thread(options: ThreadOptions): Shape
- * 桥接：defineOp({ brep: __own_threadBrepOp })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_threadBrepOp })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export declare const thread: ((...args: unknown[]) => Promise<import("..").Shape>) & {
     __faijs__dualOp?: import("../../define-op.js").DualOpMeta;
@@ -136,8 +136,8 @@ export declare const thread: ((...args: unknown[]) => Promise<import("..").Shape
 /**
  * convexHull — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * convexHull(points: Vec3[]): Shape
- * 桥接：defineOp({ brep: __own_convexHullBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_convexHullBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export declare const convexHull: ((...args: unknown[]) => Promise<import("..").Shape>) & {
     __faijs__dualOp?: import("../../define-op.js").DualOpMeta;

package/dist/api/generated/operations.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"operations.d.ts","sourceRoot":"","sources":["../../../src/api/generated/operations.ts"],"names":[],"mappings":"AAuBA;;;;;GAKG;AACH,eAAO,MAAM,OAAO;;CAGlB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,OAAO;;CAGlB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,KAAK;;CAGhB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,cAAc;;CAGzB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,YAAY;;CAGvB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,aAAa;;CAGxB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,eAAe;;CAG1B,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,WAAW;;CAGtB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,IAAI;;CAGf,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,KAAK;;CAGhB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,MAAM;;CAGjB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,IAAI;;CAGf,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,UAAU;;CAGrB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,kBAAkB;;CAG7B,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,MAAM;;CAGjB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,UAAU;;CAGrB,CAAA"}
+{"version":3,"file":"operations.d.ts","sourceRoot":"","sources":["../../../src/api/generated/operations.ts"],"names":[],"mappings":"AA2BA;;;;;GAKG;AACH,eAAO,MAAM,OAAO;;CAGlB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,OAAO;;CAGlB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,KAAK;;CAGhB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,cAAc;;CAGzB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,YAAY;;CAGvB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,aAAa;;CAGxB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,eAAe;;CAG1B,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,WAAW;;CAGtB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,IAAI;;CAGf,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,KAAK;;CAGhB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,MAAM;;CAGjB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,IAAI;;CAGf,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,UAAU;;CAGrB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,kBAAkB;;CAG7B,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,MAAM;;CAGjB,CAAA;AAEF;;;;;GAKG;AACH,eAAO,MAAM,UAAU;;CAGrB,CAAA"}

package/dist/api/generated/operations.js

@@ -2,29 +2,33 @@
  * generated/operations.ts — 生成文件，勿手改。
  * 由 packages/core/scripts/gen-l3-surface.ts 依据 api/surface/arg-spec.ts 生成（E5/P14 分片）。
  * operations 模块：16 个投影符号；另有 106 个 skip 登记。
+ * A6（2026-10-06）口径指认：本文件是 brepjs 投影面的**增量**清单；脚本面全集的
+ * 权威来源是 generated/script-face.ts + gen-symbol-table 产物
+ * lang/symbol-table.generated.ts（cad 脚本面 95 op）。两个清单回答不同问题，
+ * 互不为超集——禁止用本文件的名字反推脚本面能力。
  */
 import { defineOp } from '../../define-op.js';
-import { extrudeBrep as __own_extrudeBrep } from '../brep-mirror/sweepFns.js';
-import { revolveBrep as __own_revolveBrep } from '../brep-mirror/sweepFns.js';
-import { sweepBrep as __own_sweepBrep } from '../brep-mirror/sweepFns.js';
-import { complexExtrudeBrep as __own_complexExtrudeBrep } from '../brep-mirror/sweepFns.js';
-import { twistExtrudeBrep as __own_twistExtrudeBrep } from '../brep-mirror/sweepFns.js';
-import { linearPatternBrep as __own_linearPatternBrep } from '../brep-mirror/patternFns.js';
-import { circularPatternBrep as __own_circularPatternBrep } from '../brep-mirror/patternFns.js';
-import { gridPatternBrep as __own_gridPatternBrep } from '../brep-mirror/patternFns.js';
-import { roofBrep as __own_roofBrep } from '../brep-mirror/roofFns.js';
-import { drillBrep as __own_drillBrep } from '../brep-mirror/compoundFns.js';
-import { pocketBrep as __own_pocketBrep } from '../brep-mirror/compoundFns.js';
-import { bossBrep as __own_bossBrep } from '../brep-mirror/compoundFns.js';
-import { mirrorJoinBrep as __own_mirrorJoinBrep } from '../brep-mirror/compoundFns.js';
-import { rectangularPatternBrep as __own_rectangularPatternBrep } from '../brep-mirror/patternFns.js';
-import { threadBrepOp as __own_threadBrepOp } from '../brep-mirror/threadFns.js';
-import { convexHullBrep as __own_convexHullBrep } from '../brep-mirror/hullFns.js';
+import { extrudeBrep as __own_extrudeBrep } from '../brep-operations/sweepFns.js';
+import { revolveBrep as __own_revolveBrep } from '../brep-operations/sweepFns.js';
+import { sweepBrep as __own_sweepBrep } from '../brep-operations/sweepFns.js';
+import { complexExtrudeBrep as __own_complexExtrudeBrep } from '../brep-operations/sweepFns.js';
+import { twistExtrudeBrep as __own_twistExtrudeBrep } from '../brep-operations/sweepFns.js';
+import { linearPatternBrep as __own_linearPatternBrep } from '../brep-operations/patternFns.js';
+import { circularPatternBrep as __own_circularPatternBrep } from '../brep-operations/patternFns.js';
+import { gridPatternBrep as __own_gridPatternBrep } from '../brep-operations/patternFns.js';
+import { roofBrep as __own_roofBrep } from '../brep-operations/roofFns.js';
+import { drillBrep as __own_drillBrep } from '../brep-operations/compoundFns.js';
+import { pocketBrep as __own_pocketBrep } from '../brep-operations/compoundFns.js';
+import { bossBrep as __own_bossBrep } from '../brep-operations/compoundFns.js';
+import { mirrorJoinBrep as __own_mirrorJoinBrep } from '../brep-operations/compoundFns.js';
+import { rectangularPatternBrep as __own_rectangularPatternBrep } from '../brep-operations/patternFns.js';
+import { threadBrepOp as __own_threadBrepOp } from '../brep-operations/threadFns.js';
+import { convexHullBrep as __own_convexHullBrep } from '../brep-operations/hullFns.js';
 /**
  * extrude — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * extrude(face: Shape, height: number|Vec3) → Shape｜extrude(face: Shape, params: { length? | upTo, normal?, mode?, baseFeature?, offset? }) → Shape
- * 桥接：defineOp({ brep: __own_extrudeBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_extrudeBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export const extrude = defineOp({
     brep: __own_extrudeBrep,
@@ -33,8 +37,8 @@ export const extrude = defineOp({
 /**
  * revolve — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * revolve(face: Shape, options?: RevolveOptions): Shape
- * 桥接：defineOp({ brep: __own_revolveBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_revolveBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export const revolve = defineOp({
     brep: __own_revolveBrep,
@@ -43,8 +47,8 @@ export const revolve = defineOp({
 /**
  * sweep — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * sweep(wire: Shape, spine: Shape, config?: SweepOptions, shellMode?: boolean): Shape
- * 桥接：defineOp({ brep: __own_sweepBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_sweepBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export const sweep = defineOp({
     brep: __own_sweepBrep,
@@ -53,8 +57,8 @@ export const sweep = defineOp({
 /**
  * complexExtrude — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * complexExtrude(wire: Shape, center: Vec3, normal: Vec3, profile?: ExtrusionProfile): Shape
- * 桥接：defineOp({ brep: __own_complexExtrudeBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_complexExtrudeBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export const complexExtrude = defineOp({
     brep: __own_complexExtrudeBrep,
@@ -63,8 +67,8 @@ export const complexExtrude = defineOp({
 /**
  * twistExtrude — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * twistExtrude(wire: Shape, angleDegrees: number, center: Vec3, normal: Vec3): Shape
- * 桥接：defineOp({ brep: __own_twistExtrudeBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_twistExtrudeBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export const twistExtrude = defineOp({
     brep: __own_twistExtrudeBrep,
@@ -73,8 +77,8 @@ export const twistExtrude = defineOp({
 /**
  * linearPattern — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * linearPattern(shape: Shape, direction: Vec3, count: number, spacing: number): Shape
- * 桥接：defineOp({ brep: __own_linearPatternBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_linearPatternBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export const linearPattern = defineOp({
     brep: __own_linearPatternBrep,
@@ -83,8 +87,8 @@ export const linearPattern = defineOp({
 /**
  * circularPattern — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * circularPattern(shape: Shape, axis: Vec3, count: number, fullAngle?: number, center?: Vec3): Shape
- * 桥接：defineOp({ brep: __own_circularPatternBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_circularPatternBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export const circularPattern = defineOp({
     brep: __own_circularPatternBrep,
@@ -93,8 +97,8 @@ export const circularPattern = defineOp({
 /**
  * gridPattern — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * gridPattern(shape: Shape, directionX: Vec3, directionY: Vec3, countX: number, countY: number, spacingX: number, spacingY: number): Shape
- * 桥接：defineOp({ brep: __own_gridPatternBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_gridPatternBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export const gridPattern = defineOp({
     brep: __own_gridPatternBrep,
@@ -103,58 +107,58 @@ export const gridPattern = defineOp({
 /**
  * roof — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * roof(wire: Shape, options?: RoofOptions): Shape
- * 桥接：defineOp({ brep: __own_roofBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_roofBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export const roof = defineOp({
     brep: __own_roofBrep,
-    name: 'roof', naming: { "kind": "kernel", "newFaces": { "via": "byAdjacency" } }, capabilities: ["buildTriFace", "dispose", "fixShape", "isValid", "sew", "sewAndSolidify"],
+    name: 'roof', naming: { "kind": "kernel", "newFaces": { "via": "byAdjacency" } }, engines: ["occt"],
 });
 /**
  * drill — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * drill(shape: Shape, options: DrillOptions): Shape
- * 桥接：defineOp({ brep: __own_drillBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_drillBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export const drill = defineOp({
     brep: __own_drillBrep,
-    name: 'drill', naming: { "kind": "kernel", "newFaces": { "via": "byAdjacency" } }, capabilities: ["makeCylinder", "located", "getBoundingBox", "cut"],
+    name: 'drill', naming: { "kind": "kernel", "newFaces": { "via": "byAdjacency" } },
 });
 /**
  * pocket — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * pocket(shape: Shape, options: PocketOptions): Shape
- * 桥接：defineOp({ brep: __own_pocketBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_pocketBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export const pocket = defineOp({
     brep: __own_pocketBrep,
-    name: 'pocket', naming: { "kind": "kernel", "newFaces": { "via": "byAdjacency" } }, capabilities: ["getSubShapes", "surfaceCenterOfMass", "uvBounds", "surfaceNormal", "makeFace", "translate", "extrude", "cut"],
+    name: 'pocket', naming: { "kind": "kernel", "newFaces": { "via": "byAdjacency" } },
 });
 /**
  * boss — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * boss(shape: Shape, options: BossOptions): Shape
- * 桥接：defineOp({ brep: __own_bossBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_bossBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export const boss = defineOp({
     brep: __own_bossBrep,
-    name: 'boss', naming: { "kind": "kernel", "newFaces": { "via": "byAdjacency" } }, capabilities: ["getSubShapes", "surfaceCenterOfMass", "uvBounds", "surfaceNormal", "makeFace", "translate", "extrude", "fuse"],
+    name: 'boss', naming: { "kind": "kernel", "newFaces": { "via": "byAdjacency" } },
 });
 /**
  * mirrorJoin — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * mirrorJoin(shape: Shape, options?: MirrorJoinOptions): Shape
- * 桥接：defineOp({ brep: __own_mirrorJoinBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_mirrorJoinBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export const mirrorJoin = defineOp({
     brep: __own_mirrorJoinBrep,
-    name: 'mirrorJoin', naming: { "kind": "replicate", "k": 2 }, capabilities: ["mirror", "fuse"],
+    name: 'mirrorJoin', naming: { "kind": "replicate", "k": 2 },
 });
 /**
  * rectangularPattern — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * rectangularPattern(shape: Shape, options: RectangularPatternOptions): Shape
- * 桥接：defineOp({ brep: __own_rectangularPatternBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_rectangularPatternBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export const rectangularPattern = defineOp({
     brep: __own_rectangularPatternBrep,
@@ -163,8 +167,8 @@ export const rectangularPattern = defineOp({
 /**
  * thread — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * thread(options: ThreadOptions): Shape
- * 桥接：defineOp({ brep: __own_threadBrepOp })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_threadBrepOp })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export const thread = defineOp({
     brep: __own_threadBrepOp,
@@ -173,11 +177,11 @@ export const thread = defineOp({
 /**
  * convexHull — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。
  * convexHull(points: Vec3[]): Shape
- * 桥接：defineOp({ brep: __own_convexHullBrep })——core 直连 occt 引擎（§5.4 selfhost），
- * D11 归一在自有实现内部完成（api/brep-mirror/）。
+ * 桥接：defineOp({ brep: __own_convexHullBrep })——core 直连 occt 引擎（§5.4），
+ * D11 归一在自有实现内部完成（api/brep-operations/）。
  */
 export const convexHull = defineOp({
     brep: __own_convexHullBrep,
-    name: 'convexHull', naming: { "kind": "unmodeled", "reason": "construct vocabulary pending Phase 3" }, capabilities: ["hullFromPoints"],
+    name: 'convexHull', naming: { "kind": "unmodeled", "reason": "construct vocabulary pending Phase 3" },
 });
 //# sourceMappingURL=operations.js.map

package/dist/api/generated/operations.js.map

@@ -1 +1 @@
-{"version":3,"file":"operations.js","sourceRoot":"","sources":["../../../src/api/generated/operations.ts"],"names":[],"mappings":"AAAA;;;;GAIG;AACH,OAAO,EAAE,QAAQ,EAAE,MAAM,iBAAiB,CAAA;AAC1C,OAAO,EAAE,WAAW,IAAI,iBAAiB,EAAE,MAAM,yBAAyB,CAAA;AAC1E,OAAO,EAAE,WAAW,IAAI,iBAAiB,EAAE,MAAM,yBAAyB,CAAA;AAC1E,OAAO,EAAE,SAAS,IAAI,eAAe,EAAE,MAAM,yBAAyB,CAAA;AACtE,OAAO,EAAE,kBAAkB,IAAI,wBAAwB,EAAE,MAAM,yBAAyB,CAAA;AACxF,OAAO,EAAE,gBAAgB,IAAI,sBAAsB,EAAE,MAAM,yBAAyB,CAAA;AACpF,OAAO,EAAE,iBAAiB,IAAI,uBAAuB,EAAE,MAAM,2BAA2B,CAAA;AACxF,OAAO,EAAE,mBAAmB,IAAI,yBAAyB,EAAE,MAAM,2BAA2B,CAAA;AAC5F,OAAO,EAAE,eAAe,IAAI,qBAAqB,EAAE,MAAM,2BAA2B,CAAA;AACpF,OAAO,EAAE,QAAQ,IAAI,cAAc,EAAE,MAAM,wBAAwB,CAAA;AACnE,OAAO,EAAE,SAAS,IAAI,eAAe,EAAE,MAAM,4BAA4B,CAAA;AACzE,OAAO,EAAE,UAAU,IAAI,gBAAgB,EAAE,MAAM,4BAA4B,CAAA;AAC3E,OAAO,EAAE,QAAQ,IAAI,cAAc,EAAE,MAAM,4BAA4B,CAAA;AACvE,OAAO,EAAE,cAAc,IAAI,oBAAoB,EAAE,MAAM,4BAA4B,CAAA;AACnF,OAAO,EAAE,sBAAsB,IAAI,4BAA4B,EAAE,MAAM,2BAA2B,CAAA;AAClG,OAAO,EAAE,YAAY,IAAI,kBAAkB,EAAE,MAAM,0BAA0B,CAAA;AAC7E,OAAO,EAAE,cAAc,IAAI,oBAAoB,EAAE,MAAM,wBAAwB,CAAA;AAE/E;;;;;GAKG;AACH,MAAM,CAAC,MAAM,OAAO,GAAG,QAAQ,CAAC;IAC9B,IAAI,EAAE,iBAAiB;IACvB,IAAI,EAAE,SAAS,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,WAAW,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,UAAU,EAAC,OAAO,EAAC,CAAC,EAAC,MAAM,EAAC,UAAU,EAAC,MAAM,EAAC,KAAK,EAAC,EAAC,EAAC,MAAM,EAAC,UAAU,EAAC,MAAM,EAAC,QAAQ,EAAC,CAAC,EAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CAC9K,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,OAAO,GAAG,QAAQ,CAAC;IAC9B,IAAI,EAAE,iBAAiB;IACvB,IAAI,EAAE,SAAS,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,WAAW,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,UAAU,EAAC,OAAO,EAAC,CAAC,EAAC,MAAM,EAAC,UAAU,EAAC,MAAM,EAAC,KAAK,EAAC,EAAC,EAAC,MAAM,EAAC,UAAU,EAAC,MAAM,EAAC,QAAQ,EAAC,EAAC,EAAC,MAAM,EAAC,MAAM,EAAC,OAAO,EAAC,CAAC,EAAC,CAAC,EAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CACxM,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,KAAK,GAAG,QAAQ,CAAC;IAC5B,IAAI,EAAE,eAAe;IACrB,IAAI,EAAE,OAAO,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,QAAQ,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,aAAa,EAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CAC7F,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,cAAc,GAAG,QAAQ,CAAC;IACrC,IAAI,EAAE,wBAAwB;IAC9B,IAAI,EAAE,gBAAgB,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,QAAQ,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,aAAa,EAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CACtG,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,YAAY,GAAG,QAAQ,CAAC;IACnC,IAAI,EAAE,sBAAsB;IAC5B,IAAI,EAAE,cAAc,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,QAAQ,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,aAAa,EAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CACpG,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,aAAa,GAAG,QAAQ,CAAC;IACpC,IAAI,EAAE,uBAAuB;IAC7B,IAAI,EAAE,eAAe,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,WAAW,EAAC,GAAG,EAAC,CAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CAC7E,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,eAAe,GAAG,QAAQ,CAAC;IACtC,IAAI,EAAE,yBAAyB;IAC/B,IAAI,EAAE,iBAAiB,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,WAAW,EAAC,GAAG,EAAC,CAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CAC/E,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,WAAW,GAAG,QAAQ,CAAC;IAClC,IAAI,EAAE,qBAAqB;IAC3B,IAAI,EAAE,aAAa,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,WAAW,EAAC,GAAG,EAAC,CAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CAC3E,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,IAAI,GAAG,QAAQ,CAAC;IAC3B,IAAI,EAAE,cAAc;IACpB,IAAI,EAAE,MAAM,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,QAAQ,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,aAAa,EAAC,EAAC,EAAE,YAAY,EAAE,CAAC,cAAc,EAAC,SAAS,EAAC,UAAU,EAAC,SAAS,EAAC,KAAK,EAAC,gBAAgB,CAAC;CAC/J,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,KAAK,GAAG,QAAQ,CAAC;IAC5B,IAAI,EAAE,eAAe;IACrB,IAAI,EAAE,OAAO,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,QAAQ,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,aAAa,EAAC,EAAC,EAAE,YAAY,EAAE,CAAC,cAAc,EAAC,SAAS,EAAC,gBAAgB,EAAC,KAAK,CAAC;CAC3I,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,MAAM,GAAG,QAAQ,CAAC;IAC7B,IAAI,EAAE,gBAAgB;IACtB,IAAI,EAAE,QAAQ,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,QAAQ,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,aAAa,EAAC,EAAC,EAAE,YAAY,EAAE,CAAC,cAAc,EAAC,qBAAqB,EAAC,UAAU,EAAC,eAAe,EAAC,UAAU,EAAC,WAAW,EAAC,SAAS,EAAC,KAAK,CAAC;CACnM,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,IAAI,GAAG,QAAQ,CAAC;IAC3B,IAAI,EAAE,cAAc;IACpB,IAAI,EAAE,MAAM,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,QAAQ,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,aAAa,EAAC,EAAC,EAAE,YAAY,EAAE,CAAC,cAAc,EAAC,qBAAqB,EAAC,UAAU,EAAC,eAAe,EAAC,UAAU,EAAC,WAAW,EAAC,SAAS,EAAC,MAAM,CAAC;CAClM,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,UAAU,GAAG,QAAQ,CAAC;IACjC,IAAI,EAAE,oBAAoB;IAC1B,IAAI,EAAE,YAAY,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,WAAW,EAAC,GAAG,EAAC,CAAC,EAAC,EAAE,YAAY,EAAE,CAAC,QAAQ,EAAC,MAAM,CAAC;CACxF,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,kBAAkB,GAAG,QAAQ,CAAC;IACzC,IAAI,EAAE,4BAA4B;IAClC,IAAI,EAAE,oBAAoB,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,WAAW,EAAC,GAAG,EAAC,CAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CAClF,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,MAAM,GAAG,QAAQ,CAAC;IAC7B,IAAI,EAAE,kBAAkB;IACxB,IAAI,EAAE,QAAQ,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,QAAQ,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,aAAa,EAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CAC9F,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,UAAU,GAAG,QAAQ,CAAC;IACjC,IAAI,EAAE,oBAAoB;IAC1B,IAAI,EAAE,YAAY,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,WAAW,EAAC,QAAQ,EAAC,sCAAsC,EAAC,EAAE,YAAY,EAAE,CAAC,gBAAgB,CAAC;CACnI,CAAC,CAAA","sourcesContent":["/**\n * generated/operations.ts — 生成文件，勿手改。\n * 由 packages/core/scripts/gen-l3-surface.ts 依据 api/surface/arg-spec.ts 生成（E5/P14 分片）。\n * operations 模块：16 个投影符号；另有 106 个 skip 登记。\n */\nimport { defineOp } from '../../define-op'\nimport { extrudeBrep as __own_extrudeBrep } from '../brep-mirror/sweepFns'\nimport { revolveBrep as __own_revolveBrep } from '../brep-mirror/sweepFns'\nimport { sweepBrep as __own_sweepBrep } from '../brep-mirror/sweepFns'\nimport { complexExtrudeBrep as __own_complexExtrudeBrep } from '../brep-mirror/sweepFns'\nimport { twistExtrudeBrep as __own_twistExtrudeBrep } from '../brep-mirror/sweepFns'\nimport { linearPatternBrep as __own_linearPatternBrep } from '../brep-mirror/patternFns'\nimport { circularPatternBrep as __own_circularPatternBrep } from '../brep-mirror/patternFns'\nimport { gridPatternBrep as __own_gridPatternBrep } from '../brep-mirror/patternFns'\nimport { roofBrep as __own_roofBrep } from '../brep-mirror/roofFns'\nimport { drillBrep as __own_drillBrep } from '../brep-mirror/compoundFns'\nimport { pocketBrep as __own_pocketBrep } from '../brep-mirror/compoundFns'\nimport { bossBrep as __own_bossBrep } from '../brep-mirror/compoundFns'\nimport { mirrorJoinBrep as __own_mirrorJoinBrep } from '../brep-mirror/compoundFns'\nimport { rectangularPatternBrep as __own_rectangularPatternBrep } from '../brep-mirror/patternFns'\nimport { threadBrepOp as __own_threadBrepOp } from '../brep-mirror/threadFns'\nimport { convexHullBrep as __own_convexHullBrep } from '../brep-mirror/hullFns'\n\n/**\n * extrude — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * extrude(face: Shape, height: number|Vec3) → Shape｜extrude(face: Shape, params: { length? | upTo, normal?, mode?, baseFeature?, offset? }) → Shape\n * 桥接：defineOp({ brep: __own_extrudeBrep })——core 直连 occt 引擎（§5.4 selfhost），\n * D11 归一在自有实现内部完成（api/brep-mirror/）。\n */\nexport const extrude = defineOp({\n  brep: __own_extrudeBrep,\n  name: 'extrude', naming: {\"kind\":\"construct\",\"newFaces\":{\"via\":\"explicit\",\"vocab\":[{\"kind\":\"semantic\",\"name\":\"top\"},{\"kind\":\"semantic\",\"name\":\"bottom\"}]}}, engines: [\"occt\"],\n})\n\n/**\n * revolve — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * revolve(face: Shape, options?: RevolveOptions): Shape\n * 桥接：defineOp({ brep: __own_revolveBrep })——core 直连 occt 引擎（§5.4 selfhost），\n * D11 归一在自有实现内部完成（api/brep-mirror/）。\n */\nexport const revolve = defineOp({\n  brep: __own_revolveBrep,\n  name: 'revolve', naming: {\"kind\":\"construct\",\"newFaces\":{\"via\":\"explicit\",\"vocab\":[{\"kind\":\"semantic\",\"name\":\"top\"},{\"kind\":\"semantic\",\"name\":\"bottom\"},{\"kind\":\"wall\",\"index\":0}]}}, engines: [\"occt\"],\n})\n\n/**\n * sweep — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * sweep(wire: Shape, spine: Shape, config?: SweepOptions, shellMode?: boolean): Shape\n * 桥接：defineOp({ brep: __own_sweepBrep })——core 直连 occt 引擎（§5.4 selfhost），\n * D11 归一在自有实现内部完成（api/brep-mirror/）。\n */\nexport const sweep = defineOp({\n  brep: __own_sweepBrep,\n  name: 'sweep', naming: {\"kind\":\"kernel\",\"newFaces\":{\"via\":\"byAdjacency\"}}, engines: [\"occt\"],\n})\n\n/**\n * complexExtrude — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * complexExtrude(wire: Shape, center: Vec3, normal: Vec3, profile?: ExtrusionProfile): Shape\n * 桥接：defineOp({ brep: __own_complexExtrudeBrep })——core 直连 occt 引擎（§5.4 selfhost），\n * D11 归一在自有实现内部完成（api/brep-mirror/）。\n */\nexport const complexExtrude = defineOp({\n  brep: __own_complexExtrudeBrep,\n  name: 'complexExtrude', naming: {\"kind\":\"kernel\",\"newFaces\":{\"via\":\"byAdjacency\"}}, engines: [\"occt\"],\n})\n\n/**\n * twistExtrude — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * twistExtrude(wire: Shape, angleDegrees: number, center: Vec3, normal: Vec3): Shape\n * 桥接：defineOp({ brep: __own_twistExtrudeBrep })——core 直连 occt 引擎（§5.4 selfhost），\n * D11 归一在自有实现内部完成（api/brep-mirror/）。\n */\nexport const twistExtrude = defineOp({\n  brep: __own_twistExtrudeBrep,\n  name: 'twistExtrude', naming: {\"kind\":\"kernel\",\"newFaces\":{\"via\":\"byAdjacency\"}}, engines: [\"occt\"],\n})\n\n/**\n * linearPattern — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * linearPattern(shape: Shape, direction: Vec3, count: number, spacing: number): Shape\n * 桥接：defineOp({ brep: __own_linearPatternBrep })——core 直连 occt 引擎（§5.4 selfhost），\n * D11 归一在自有实现内部完成（api/brep-mirror/）。\n */\nexport const linearPattern = defineOp({\n  brep: __own_linearPatternBrep,\n  name: 'linearPattern', naming: {\"kind\":\"replicate\",\"k\":0}, engines: [\"occt\"],\n})\n\n/**\n * circularPattern — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * circularPattern(shape: Shape, axis: Vec3, count: number, fullAngle?: number, center?: Vec3): Shape\n * 桥接：defineOp({ brep: __own_circularPatternBrep })——core 直连 occt 引擎（§5.4 selfhost），\n * D11 归一在自有实现内部完成（api/brep-mirror/）。\n */\nexport const circularPattern = defineOp({\n  brep: __own_circularPatternBrep,\n  name: 'circularPattern', naming: {\"kind\":\"replicate\",\"k\":0}, engines: [\"occt\"],\n})\n\n/**\n * gridPattern — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * gridPattern(shape: Shape, directionX: Vec3, directionY: Vec3, countX: number, countY: number, spacingX: number, spacingY: number): Shape\n * 桥接：defineOp({ brep: __own_gridPatternBrep })——core 直连 occt 引擎（§5.4 selfhost），\n * D11 归一在自有实现内部完成（api/brep-mirror/）。\n */\nexport const gridPattern = defineOp({\n  brep: __own_gridPatternBrep,\n  name: 'gridPattern', naming: {\"kind\":\"replicate\",\"k\":0}, engines: [\"occt\"],\n})\n\n/**\n * roof — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * roof(wire: Shape, options?: RoofOptions): Shape\n * 桥接：defineOp({ brep: __own_roofBrep })——core 直连 occt 引擎（§5.4 selfhost），\n * D11 归一在自有实现内部完成（api/brep-mirror/）。\n */\nexport const roof = defineOp({\n  brep: __own_roofBrep,\n  name: 'roof', naming: {\"kind\":\"kernel\",\"newFaces\":{\"via\":\"byAdjacency\"}}, capabilities: [\"buildTriFace\",\"dispose\",\"fixShape\",\"isValid\",\"sew\",\"sewAndSolidify\"],\n})\n\n/**\n * drill — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * drill(shape: Shape, options: DrillOptions): Shape\n * 桥接：defineOp({ brep: __own_drillBrep })——core 直连 occt 引擎（§5.4 selfhost），\n * D11 归一在自有实现内部完成（api/brep-mirror/）。\n */\nexport const drill = defineOp({\n  brep: __own_drillBrep,\n  name: 'drill', naming: {\"kind\":\"kernel\",\"newFaces\":{\"via\":\"byAdjacency\"}}, capabilities: [\"makeCylinder\",\"located\",\"getBoundingBox\",\"cut\"],\n})\n\n/**\n * pocket — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * pocket(shape: Shape, options: PocketOptions): Shape\n * 桥接：defineOp({ brep: __own_pocketBrep })——core 直连 occt 引擎（§5.4 selfhost），\n * D11 归一在自有实现内部完成（api/brep-mirror/）。\n */\nexport const pocket = defineOp({\n  brep: __own_pocketBrep,\n  name: 'pocket', naming: {\"kind\":\"kernel\",\"newFaces\":{\"via\":\"byAdjacency\"}}, capabilities: [\"getSubShapes\",\"surfaceCenterOfMass\",\"uvBounds\",\"surfaceNormal\",\"makeFace\",\"translate\",\"extrude\",\"cut\"],\n})\n\n/**\n * boss — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * boss(shape: Shape, options: BossOptions): Shape\n * 桥接：defineOp({ brep: __own_bossBrep })——core 直连 occt 引擎（§5.4 selfhost），\n * D11 归一在自有实现内部完成（api/brep-mirror/）。\n */\nexport const boss = defineOp({\n  brep: __own_bossBrep,\n  name: 'boss', naming: {\"kind\":\"kernel\",\"newFaces\":{\"via\":\"byAdjacency\"}}, capabilities: [\"getSubShapes\",\"surfaceCenterOfMass\",\"uvBounds\",\"surfaceNormal\",\"makeFace\",\"translate\",\"extrude\",\"fuse\"],\n})\n\n/**\n * mirrorJoin — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * mirrorJoin(shape: Shape, options?: MirrorJoinOptions): Shape\n * 桥接：defineOp({ brep: __own_mirrorJoinBrep })——core 直连 occt 引擎（§5.4 selfhost），\n * D11 归一在自有实现内部完成（api/brep-mirror/）。\n */\nexport const mirrorJoin = defineOp({\n  brep: __own_mirrorJoinBrep,\n  name: 'mirrorJoin', naming: {\"kind\":\"replicate\",\"k\":2}, capabilities: [\"mirror\",\"fuse\"],\n})\n\n/**\n * rectangularPattern — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * rectangularPattern(shape: Shape, options: RectangularPatternOptions): Shape\n * 桥接：defineOp({ brep: __own_rectangularPatternBrep })——core 直连 occt 引擎（§5.4 selfhost），\n * D11 归一在自有实现内部完成（api/brep-mirror/）。\n */\nexport const rectangularPattern = defineOp({\n  brep: __own_rectangularPatternBrep,\n  name: 'rectangularPattern', naming: {\"kind\":\"replicate\",\"k\":0}, engines: [\"occt\"],\n})\n\n/**\n * thread — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * thread(options: ThreadOptions): Shape\n * 桥接：defineOp({ brep: __own_threadBrepOp })——core 直连 occt 引擎（§5.4 selfhost），\n * D11 归一在自有实现内部完成（api/brep-mirror/）。\n */\nexport const thread = defineOp({\n  brep: __own_threadBrepOp,\n  name: 'thread', naming: {\"kind\":\"kernel\",\"newFaces\":{\"via\":\"byAdjacency\"}}, engines: [\"occt\"],\n})\n\n/**\n * convexHull — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * convexHull(points: Vec3[]): Shape\n * 桥接：defineOp({ brep: __own_convexHullBrep })——core 直连 occt 引擎（§5.4 selfhost），\n * D11 归一在自有实现内部完成（api/brep-mirror/）。\n */\nexport const convexHull = defineOp({\n  brep: __own_convexHullBrep,\n  name: 'convexHull', naming: {\"kind\":\"unmodeled\",\"reason\":\"construct vocabulary pending Phase 3\"}, capabilities: [\"hullFromPoints\"],\n})\n"]}
+{"version":3,"file":"operations.js","sourceRoot":"","sources":["../../../src/api/generated/operations.ts"],"names":[],"mappings":"AAAA;;;;;;;;GAQG;AACH,OAAO,EAAE,QAAQ,EAAE,MAAM,iBAAiB,CAAA;AAC1C,OAAO,EAAE,WAAW,IAAI,iBAAiB,EAAE,MAAM,6BAA6B,CAAA;AAC9E,OAAO,EAAE,WAAW,IAAI,iBAAiB,EAAE,MAAM,6BAA6B,CAAA;AAC9E,OAAO,EAAE,SAAS,IAAI,eAAe,EAAE,MAAM,6BAA6B,CAAA;AAC1E,OAAO,EAAE,kBAAkB,IAAI,wBAAwB,EAAE,MAAM,6BAA6B,CAAA;AAC5F,OAAO,EAAE,gBAAgB,IAAI,sBAAsB,EAAE,MAAM,6BAA6B,CAAA;AACxF,OAAO,EAAE,iBAAiB,IAAI,uBAAuB,EAAE,MAAM,+BAA+B,CAAA;AAC5F,OAAO,EAAE,mBAAmB,IAAI,yBAAyB,EAAE,MAAM,+BAA+B,CAAA;AAChG,OAAO,EAAE,eAAe,IAAI,qBAAqB,EAAE,MAAM,+BAA+B,CAAA;AACxF,OAAO,EAAE,QAAQ,IAAI,cAAc,EAAE,MAAM,4BAA4B,CAAA;AACvE,OAAO,EAAE,SAAS,IAAI,eAAe,EAAE,MAAM,gCAAgC,CAAA;AAC7E,OAAO,EAAE,UAAU,IAAI,gBAAgB,EAAE,MAAM,gCAAgC,CAAA;AAC/E,OAAO,EAAE,QAAQ,IAAI,cAAc,EAAE,MAAM,gCAAgC,CAAA;AAC3E,OAAO,EAAE,cAAc,IAAI,oBAAoB,EAAE,MAAM,gCAAgC,CAAA;AACvF,OAAO,EAAE,sBAAsB,IAAI,4BAA4B,EAAE,MAAM,+BAA+B,CAAA;AACtG,OAAO,EAAE,YAAY,IAAI,kBAAkB,EAAE,MAAM,8BAA8B,CAAA;AACjF,OAAO,EAAE,cAAc,IAAI,oBAAoB,EAAE,MAAM,4BAA4B,CAAA;AAEnF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,OAAO,GAAG,QAAQ,CAAC;IAC9B,IAAI,EAAE,iBAAiB;IACvB,IAAI,EAAE,SAAS,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,WAAW,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,UAAU,EAAC,OAAO,EAAC,CAAC,EAAC,MAAM,EAAC,UAAU,EAAC,MAAM,EAAC,KAAK,EAAC,EAAC,EAAC,MAAM,EAAC,UAAU,EAAC,MAAM,EAAC,QAAQ,EAAC,CAAC,EAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CAC9K,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,OAAO,GAAG,QAAQ,CAAC;IAC9B,IAAI,EAAE,iBAAiB;IACvB,IAAI,EAAE,SAAS,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,WAAW,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,UAAU,EAAC,OAAO,EAAC,CAAC,EAAC,MAAM,EAAC,UAAU,EAAC,MAAM,EAAC,KAAK,EAAC,EAAC,EAAC,MAAM,EAAC,UAAU,EAAC,MAAM,EAAC,QAAQ,EAAC,EAAC,EAAC,MAAM,EAAC,MAAM,EAAC,OAAO,EAAC,CAAC,EAAC,CAAC,EAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CACxM,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,KAAK,GAAG,QAAQ,CAAC;IAC5B,IAAI,EAAE,eAAe;IACrB,IAAI,EAAE,OAAO,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,QAAQ,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,aAAa,EAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CAC7F,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,cAAc,GAAG,QAAQ,CAAC;IACrC,IAAI,EAAE,wBAAwB;IAC9B,IAAI,EAAE,gBAAgB,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,QAAQ,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,aAAa,EAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CACtG,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,YAAY,GAAG,QAAQ,CAAC;IACnC,IAAI,EAAE,sBAAsB;IAC5B,IAAI,EAAE,cAAc,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,QAAQ,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,aAAa,EAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CACpG,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,aAAa,GAAG,QAAQ,CAAC;IACpC,IAAI,EAAE,uBAAuB;IAC7B,IAAI,EAAE,eAAe,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,WAAW,EAAC,GAAG,EAAC,CAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CAC7E,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,eAAe,GAAG,QAAQ,CAAC;IACtC,IAAI,EAAE,yBAAyB;IAC/B,IAAI,EAAE,iBAAiB,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,WAAW,EAAC,GAAG,EAAC,CAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CAC/E,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,WAAW,GAAG,QAAQ,CAAC;IAClC,IAAI,EAAE,qBAAqB;IAC3B,IAAI,EAAE,aAAa,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,WAAW,EAAC,GAAG,EAAC,CAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CAC3E,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,IAAI,GAAG,QAAQ,CAAC;IAC3B,IAAI,EAAE,cAAc;IACpB,IAAI,EAAE,MAAM,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,QAAQ,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,aAAa,EAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CAC5F,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,KAAK,GAAG,QAAQ,CAAC;IAC5B,IAAI,EAAE,eAAe;IACrB,IAAI,EAAE,OAAO,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,QAAQ,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,aAAa,EAAC,EAAC;CAC1E,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,MAAM,GAAG,QAAQ,CAAC;IAC7B,IAAI,EAAE,gBAAgB;IACtB,IAAI,EAAE,QAAQ,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,QAAQ,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,aAAa,EAAC,EAAC;CAC3E,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,IAAI,GAAG,QAAQ,CAAC;IAC3B,IAAI,EAAE,cAAc;IACpB,IAAI,EAAE,MAAM,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,QAAQ,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,aAAa,EAAC,EAAC;CACzE,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,UAAU,GAAG,QAAQ,CAAC;IACjC,IAAI,EAAE,oBAAoB;IAC1B,IAAI,EAAE,YAAY,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,WAAW,EAAC,GAAG,EAAC,CAAC,EAAC;CACvD,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,kBAAkB,GAAG,QAAQ,CAAC;IACzC,IAAI,EAAE,4BAA4B;IAClC,IAAI,EAAE,oBAAoB,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,WAAW,EAAC,GAAG,EAAC,CAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CAClF,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,MAAM,GAAG,QAAQ,CAAC;IAC7B,IAAI,EAAE,kBAAkB;IACxB,IAAI,EAAE,QAAQ,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,QAAQ,EAAC,UAAU,EAAC,EAAC,KAAK,EAAC,aAAa,EAAC,EAAC,EAAE,OAAO,EAAE,CAAC,MAAM,CAAC;CAC9F,CAAC,CAAA;AAEF;;;;;GAKG;AACH,MAAM,CAAC,MAAM,UAAU,GAAG,QAAQ,CAAC;IACjC,IAAI,EAAE,oBAAoB;IAC1B,IAAI,EAAE,YAAY,EAAE,MAAM,EAAE,EAAC,MAAM,EAAC,WAAW,EAAC,QAAQ,EAAC,sCAAsC,EAAC;CACjG,CAAC,CAAA","sourcesContent":["/**\n * generated/operations.ts — 生成文件，勿手改。\n * 由 packages/core/scripts/gen-l3-surface.ts 依据 api/surface/arg-spec.ts 生成（E5/P14 分片）。\n * operations 模块：16 个投影符号；另有 106 个 skip 登记。\n * A6（2026-10-06）口径指认：本文件是 brepjs 投影面的**增量**清单；脚本面全集的\n * 权威来源是 generated/script-face.ts + gen-symbol-table 产物\n * lang/symbol-table.generated.ts（cad 脚本面 95 op）。两个清单回答不同问题，\n * 互不为超集——禁止用本文件的名字反推脚本面能力。\n */\nimport { defineOp } from '../../define-op'\nimport { extrudeBrep as __own_extrudeBrep } from '../brep-operations/sweepFns'\nimport { revolveBrep as __own_revolveBrep } from '../brep-operations/sweepFns'\nimport { sweepBrep as __own_sweepBrep } from '../brep-operations/sweepFns'\nimport { complexExtrudeBrep as __own_complexExtrudeBrep } from '../brep-operations/sweepFns'\nimport { twistExtrudeBrep as __own_twistExtrudeBrep } from '../brep-operations/sweepFns'\nimport { linearPatternBrep as __own_linearPatternBrep } from '../brep-operations/patternFns'\nimport { circularPatternBrep as __own_circularPatternBrep } from '../brep-operations/patternFns'\nimport { gridPatternBrep as __own_gridPatternBrep } from '../brep-operations/patternFns'\nimport { roofBrep as __own_roofBrep } from '../brep-operations/roofFns'\nimport { drillBrep as __own_drillBrep } from '../brep-operations/compoundFns'\nimport { pocketBrep as __own_pocketBrep } from '../brep-operations/compoundFns'\nimport { bossBrep as __own_bossBrep } from '../brep-operations/compoundFns'\nimport { mirrorJoinBrep as __own_mirrorJoinBrep } from '../brep-operations/compoundFns'\nimport { rectangularPatternBrep as __own_rectangularPatternBrep } from '../brep-operations/patternFns'\nimport { threadBrepOp as __own_threadBrepOp } from '../brep-operations/threadFns'\nimport { convexHullBrep as __own_convexHullBrep } from '../brep-operations/hullFns'\n\n/**\n * extrude — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * extrude(face: Shape, height: number|Vec3) → Shape｜extrude(face: Shape, params: { length? | upTo, normal?, mode?, baseFeature?, offset? }) → Shape\n * 桥接：defineOp({ brep: __own_extrudeBrep })——core 直连 occt 引擎（§5.4），\n * D11 归一在自有实现内部完成（api/brep-operations/）。\n */\nexport const extrude = defineOp({\n  brep: __own_extrudeBrep,\n  name: 'extrude', naming: {\"kind\":\"construct\",\"newFaces\":{\"via\":\"explicit\",\"vocab\":[{\"kind\":\"semantic\",\"name\":\"top\"},{\"kind\":\"semantic\",\"name\":\"bottom\"}]}}, engines: [\"occt\"],\n})\n\n/**\n * revolve — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * revolve(face: Shape, options?: RevolveOptions): Shape\n * 桥接：defineOp({ brep: __own_revolveBrep })——core 直连 occt 引擎（§5.4），\n * D11 归一在自有实现内部完成（api/brep-operations/）。\n */\nexport const revolve = defineOp({\n  brep: __own_revolveBrep,\n  name: 'revolve', naming: {\"kind\":\"construct\",\"newFaces\":{\"via\":\"explicit\",\"vocab\":[{\"kind\":\"semantic\",\"name\":\"top\"},{\"kind\":\"semantic\",\"name\":\"bottom\"},{\"kind\":\"wall\",\"index\":0}]}}, engines: [\"occt\"],\n})\n\n/**\n * sweep — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * sweep(wire: Shape, spine: Shape, config?: SweepOptions, shellMode?: boolean): Shape\n * 桥接：defineOp({ brep: __own_sweepBrep })——core 直连 occt 引擎（§5.4），\n * D11 归一在自有实现内部完成（api/brep-operations/）。\n */\nexport const sweep = defineOp({\n  brep: __own_sweepBrep,\n  name: 'sweep', naming: {\"kind\":\"kernel\",\"newFaces\":{\"via\":\"byAdjacency\"}}, engines: [\"occt\"],\n})\n\n/**\n * complexExtrude — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * complexExtrude(wire: Shape, center: Vec3, normal: Vec3, profile?: ExtrusionProfile): Shape\n * 桥接：defineOp({ brep: __own_complexExtrudeBrep })——core 直连 occt 引擎（§5.4），\n * D11 归一在自有实现内部完成（api/brep-operations/）。\n */\nexport const complexExtrude = defineOp({\n  brep: __own_complexExtrudeBrep,\n  name: 'complexExtrude', naming: {\"kind\":\"kernel\",\"newFaces\":{\"via\":\"byAdjacency\"}}, engines: [\"occt\"],\n})\n\n/**\n * twistExtrude — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * twistExtrude(wire: Shape, angleDegrees: number, center: Vec3, normal: Vec3): Shape\n * 桥接：defineOp({ brep: __own_twistExtrudeBrep })——core 直连 occt 引擎（§5.4），\n * D11 归一在自有实现内部完成（api/brep-operations/）。\n */\nexport const twistExtrude = defineOp({\n  brep: __own_twistExtrudeBrep,\n  name: 'twistExtrude', naming: {\"kind\":\"kernel\",\"newFaces\":{\"via\":\"byAdjacency\"}}, engines: [\"occt\"],\n})\n\n/**\n * linearPattern — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * linearPattern(shape: Shape, direction: Vec3, count: number, spacing: number): Shape\n * 桥接：defineOp({ brep: __own_linearPatternBrep })——core 直连 occt 引擎（§5.4），\n * D11 归一在自有实现内部完成（api/brep-operations/）。\n */\nexport const linearPattern = defineOp({\n  brep: __own_linearPatternBrep,\n  name: 'linearPattern', naming: {\"kind\":\"replicate\",\"k\":0}, engines: [\"occt\"],\n})\n\n/**\n * circularPattern — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * circularPattern(shape: Shape, axis: Vec3, count: number, fullAngle?: number, center?: Vec3): Shape\n * 桥接：defineOp({ brep: __own_circularPatternBrep })——core 直连 occt 引擎（§5.4），\n * D11 归一在自有实现内部完成（api/brep-operations/）。\n */\nexport const circularPattern = defineOp({\n  brep: __own_circularPatternBrep,\n  name: 'circularPattern', naming: {\"kind\":\"replicate\",\"k\":0}, engines: [\"occt\"],\n})\n\n/**\n * gridPattern — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * gridPattern(shape: Shape, directionX: Vec3, directionY: Vec3, countX: number, countY: number, spacingX: number, spacingY: number): Shape\n * 桥接：defineOp({ brep: __own_gridPatternBrep })——core 直连 occt 引擎（§5.4），\n * D11 归一在自有实现内部完成（api/brep-operations/）。\n */\nexport const gridPattern = defineOp({\n  brep: __own_gridPatternBrep,\n  name: 'gridPattern', naming: {\"kind\":\"replicate\",\"k\":0}, engines: [\"occt\"],\n})\n\n/**\n * roof — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * roof(wire: Shape, options?: RoofOptions): Shape\n * 桥接：defineOp({ brep: __own_roofBrep })——core 直连 occt 引擎（§5.4），\n * D11 归一在自有实现内部完成（api/brep-operations/）。\n */\nexport const roof = defineOp({\n  brep: __own_roofBrep,\n  name: 'roof', naming: {\"kind\":\"kernel\",\"newFaces\":{\"via\":\"byAdjacency\"}}, engines: [\"occt\"],\n})\n\n/**\n * drill — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * drill(shape: Shape, options: DrillOptions): Shape\n * 桥接：defineOp({ brep: __own_drillBrep })——core 直连 occt 引擎（§5.4），\n * D11 归一在自有实现内部完成（api/brep-operations/）。\n */\nexport const drill = defineOp({\n  brep: __own_drillBrep,\n  name: 'drill', naming: {\"kind\":\"kernel\",\"newFaces\":{\"via\":\"byAdjacency\"}},\n})\n\n/**\n * pocket — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * pocket(shape: Shape, options: PocketOptions): Shape\n * 桥接：defineOp({ brep: __own_pocketBrep })——core 直连 occt 引擎（§5.4），\n * D11 归一在自有实现内部完成（api/brep-operations/）。\n */\nexport const pocket = defineOp({\n  brep: __own_pocketBrep,\n  name: 'pocket', naming: {\"kind\":\"kernel\",\"newFaces\":{\"via\":\"byAdjacency\"}},\n})\n\n/**\n * boss — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * boss(shape: Shape, options: BossOptions): Shape\n * 桥接：defineOp({ brep: __own_bossBrep })——core 直连 occt 引擎（§5.4），\n * D11 归一在自有实现内部完成（api/brep-operations/）。\n */\nexport const boss = defineOp({\n  brep: __own_bossBrep,\n  name: 'boss', naming: {\"kind\":\"kernel\",\"newFaces\":{\"via\":\"byAdjacency\"}},\n})\n\n/**\n * mirrorJoin — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * mirrorJoin(shape: Shape, options?: MirrorJoinOptions): Shape\n * 桥接：defineOp({ brep: __own_mirrorJoinBrep })——core 直连 occt 引擎（§5.4），\n * D11 归一在自有实现内部完成（api/brep-operations/）。\n */\nexport const mirrorJoin = defineOp({\n  brep: __own_mirrorJoinBrep,\n  name: 'mirrorJoin', naming: {\"kind\":\"replicate\",\"k\":2},\n})\n\n/**\n * rectangularPattern — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * rectangularPattern(shape: Shape, options: RectangularPatternOptions): Shape\n * 桥接：defineOp({ brep: __own_rectangularPatternBrep })——core 直连 occt 引擎（§5.4），\n * D11 归一在自有实现内部完成（api/brep-operations/）。\n */\nexport const rectangularPattern = defineOp({\n  brep: __own_rectangularPatternBrep,\n  name: 'rectangularPattern', naming: {\"kind\":\"replicate\",\"k\":0}, engines: [\"occt\"],\n})\n\n/**\n * thread — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * thread(options: ThreadOptions): Shape\n * 桥接：defineOp({ brep: __own_threadBrepOp })——core 直连 occt 引擎（§5.4），\n * D11 归一在自有实现内部完成（api/brep-operations/）。\n */\nexport const thread = defineOp({\n  brep: __own_threadBrepOp,\n  name: 'thread', naming: {\"kind\":\"kernel\",\"newFaces\":{\"via\":\"byAdjacency\"}}, engines: [\"occt\"],\n})\n\n/**\n * convexHull — core 自有实现（生成文件，禁手改；来源 api/surface/arg-spec.ts）。\n * convexHull(points: Vec3[]): Shape\n * 桥接：defineOp({ brep: __own_convexHullBrep })——core 直连 occt 引擎（§5.4），\n * D11 归一在自有实现内部完成（api/brep-operations/）。\n */\nexport const convexHull = defineOp({\n  brep: __own_convexHullBrep,\n  name: 'convexHull', naming: {\"kind\":\"unmodeled\",\"reason\":\"construct vocabulary pending Phase 3\"},\n})\n"]}

package/dist/api/generated/projection.d.ts

@@ -2,5 +2,9 @@
  * generated/projection.ts — 生成文件，勿手改。
  * 由 packages/core/scripts/gen-l3-surface.ts 依据 api/surface/arg-spec.ts 生成（E5/P14 分片）。
  * projection 模块：0 个投影符号；另有 9 个 skip 登记。
+ * A6（2026-10-06）口径指认：本文件是 brepjs 投影面的**增量**清单；脚本面全集的
+ * 权威来源是 generated/script-face.ts + gen-symbol-table 产物
+ * lang/symbol-table.generated.ts（cad 脚本面 95 op）。两个清单回答不同问题，
+ * 互不为超集——禁止用本文件的名字反推脚本面能力。
  */
 //# sourceMappingURL=projection.d.ts.map

package/dist/api/generated/projection.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"projection.d.ts","sourceRoot":"","sources":["../../../src/api/generated/projection.ts"],"names":[],"mappings":"AAAA;;;;GAIG"}
+{"version":3,"file":"projection.d.ts","sourceRoot":"","sources":["../../../src/api/generated/projection.ts"],"names":[],"mappings":"AAAA;;;;;;;;GAQG"}

package/dist/api/generated/projection.js

@@ -3,5 +3,9 @@
  * generated/projection.ts — 生成文件，勿手改。
  * 由 packages/core/scripts/gen-l3-surface.ts 依据 api/surface/arg-spec.ts 生成（E5/P14 分片）。
  * projection 模块：0 个投影符号；另有 9 个 skip 登记。
+ * A6（2026-10-06）口径指认：本文件是 brepjs 投影面的**增量**清单；脚本面全集的
+ * 权威来源是 generated/script-face.ts + gen-symbol-table 产物
+ * lang/symbol-table.generated.ts（cad 脚本面 95 op）。两个清单回答不同问题，
+ * 互不为超集——禁止用本文件的名字反推脚本面能力。
  */
 //# sourceMappingURL=projection.js.map

package/dist/api/generated/projection.js.map

@@ -1 +1 @@
-{"version":3,"file":"projection.js","sourceRoot":"","sources":["../../../src/api/generated/projection.ts"],"names":[],"mappings":";AAAA;;;;GAIG","sourcesContent":["/**\n * generated/projection.ts — 生成文件，勿手改。\n * 由 packages/core/scripts/gen-l3-surface.ts 依据 api/surface/arg-spec.ts 生成（E5/P14 分片）。\n * projection 模块：0 个投影符号；另有 9 个 skip 登记。\n */\n"]}
+{"version":3,"file":"projection.js","sourceRoot":"","sources":["../../../src/api/generated/projection.ts"],"names":[],"mappings":";AAAA;;;;;;;;GAQG","sourcesContent":["/**\n * generated/projection.ts — 生成文件，勿手改。\n * 由 packages/core/scripts/gen-l3-surface.ts 依据 api/surface/arg-spec.ts 生成（E5/P14 分片）。\n * projection 模块：0 个投影符号；另有 9 个 skip 登记。\n * A6（2026-10-06）口径指认：本文件是 brepjs 投影面的**增量**清单；脚本面全集的\n * 权威来源是 generated/script-face.ts + gen-symbol-table 产物\n * lang/symbol-table.generated.ts（cad 脚本面 95 op）。两个清单回答不同问题，\n * 互不为超集——禁止用本文件的名字反推脚本面能力。\n */\n"]}

package/dist/api/generated/query.d.ts

@@ -2,5 +2,9 @@
  * generated/query.ts — 生成文件，勿手改。
  * 由 packages/core/scripts/gen-l3-surface.ts 依据 api/surface/arg-spec.ts 生成（E5/P14 分片）。
  * query 模块：0 个投影符号；另有 14 个 skip 登记。
+ * A6（2026-10-06）口径指认：本文件是 brepjs 投影面的**增量**清单；脚本面全集的
+ * 权威来源是 generated/script-face.ts + gen-symbol-table 产物
+ * lang/symbol-table.generated.ts（cad 脚本面 95 op）。两个清单回答不同问题，
+ * 互不为超集——禁止用本文件的名字反推脚本面能力。
  */
 //# sourceMappingURL=query.d.ts.map

package/dist/api/generated/query.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"query.d.ts","sourceRoot":"","sources":["../../../src/api/generated/query.ts"],"names":[],"mappings":"AAAA;;;;GAIG"}
+{"version":3,"file":"query.d.ts","sourceRoot":"","sources":["../../../src/api/generated/query.ts"],"names":[],"mappings":"AAAA;;;;;;;;GAQG"}

package/dist/api/generated/query.js

@@ -3,5 +3,9 @@
  * generated/query.ts — 生成文件，勿手改。
  * 由 packages/core/scripts/gen-l3-surface.ts 依据 api/surface/arg-spec.ts 生成（E5/P14 分片）。
  * query 模块：0 个投影符号；另有 14 个 skip 登记。
+ * A6（2026-10-06）口径指认：本文件是 brepjs 投影面的**增量**清单；脚本面全集的
+ * 权威来源是 generated/script-face.ts + gen-symbol-table 产物
+ * lang/symbol-table.generated.ts（cad 脚本面 95 op）。两个清单回答不同问题，
+ * 互不为超集——禁止用本文件的名字反推脚本面能力。
  */
 //# sourceMappingURL=query.js.map

package/dist/api/generated/query.js.map

@@ -1 +1 @@
-{"version":3,"file":"query.js","sourceRoot":"","sources":["../../../src/api/generated/query.ts"],"names":[],"mappings":";AAAA;;;;GAIG","sourcesContent":["/**\n * generated/query.ts — 生成文件，勿手改。\n * 由 packages/core/scripts/gen-l3-surface.ts 依据 api/surface/arg-spec.ts 生成（E5/P14 分片）。\n * query 模块：0 个投影符号；另有 14 个 skip 登记。\n */\n"]}
+{"version":3,"file":"query.js","sourceRoot":"","sources":["../../../src/api/generated/query.ts"],"names":[],"mappings":";AAAA;;;;;;;;GAQG","sourcesContent":["/**\n * generated/query.ts — 生成文件，勿手改。\n * 由 packages/core/scripts/gen-l3-surface.ts 依据 api/surface/arg-spec.ts 生成（E5/P14 分片）。\n * query 模块：0 个投影符号；另有 14 个 skip 登记。\n * A6（2026-10-06）口径指认：本文件是 brepjs 投影面的**增量**清单；脚本面全集的\n * 权威来源是 generated/script-face.ts + gen-symbol-table 产物\n * lang/symbol-table.generated.ts（cad 脚本面 95 op）。两个清单回答不同问题，\n * 互不为超集——禁止用本文件的名字反推脚本面能力。\n */\n"]}

package/dist/api/generated/script-face-manifest.d.ts

@@ -1,7 +1,7 @@
 /**
  * generated/script-face-manifest.ts — 生成文件，禁手改。
  * 由 packages/core/scripts/gen-l3-surface.ts 依据 api/surface/arg-spec.ts 生成。
- * cad 脚本面新增 op 清单（P23 B1 三源一致：导出面 ≡ cad 面 ≡ check() 符号表）。
+ * cad 脚本面新增 op 清单（P23 B1 双源一致：cad 面 ≡ check() 符号表）。
  */
 /** 一条 cad 脚本面新增 op。 */
 export interface ScriptFaceOp {

package/dist/api/generated/script-face-manifest.js

@@ -1,7 +1,7 @@
 /**
  * generated/script-face-manifest.ts — 生成文件，禁手改。
  * 由 packages/core/scripts/gen-l3-surface.ts 依据 api/surface/arg-spec.ts 生成。
- * cad 脚本面新增 op 清单（P23 B1 三源一致：导出面 ≡ cad 面 ≡ check() 符号表）。
+ * cad 脚本面新增 op 清单（P23 B1 双源一致：cad 面 ≡ check() 符号表）。
  */
 /** Cad script-face op manifest (B1: single source for cad namespace, check() symbol table). */
 export const SCRIPT_FACE_OPS = [
@@ -20,7 +20,7 @@ export const SCRIPT_FACE_OPS = [
     { name: 'linearPattern', module: 'operations', engines: ["occt"] },
     { name: 'circularPattern', module: 'operations', engines: ["occt"] },
     { name: 'gridPattern', module: 'operations', engines: ["occt"] },
-    { name: 'roof', module: 'operations' },
+    { name: 'roof', module: 'operations', engines: ["occt"] },
     { name: 'drill', module: 'operations' },
     { name: 'pocket', module: 'operations' },
     { name: 'boss', module: 'operations' },
@@ -34,7 +34,7 @@ export const SCRIPT_FACE_OPS = [
     { name: 'mirror', module: 'topology' },
     { name: 'clone', module: 'topology' },
     { name: 'applyMatrix', module: 'topology' },
-    { name: 'locate', module: 'topology' },
+    { name: 'locate', module: 'topology', engines: ["occt"] },
     { name: 'split', module: 'topology', engines: ["occt"] },
     { name: 'offset', module: 'topology', engines: ["occt"] },
     { name: 'heal', module: 'topology', engines: ["occt"] },