@faicad/faijs 0.29.5 → 0.31.1

package/dist/api/primitives.js

@@ -5,17 +5,16 @@
  * dispatchPath 静态判定 brep/mesh，产物经 solid()/fromBrep() 构造器创建。
  */
 import { clampNRad } from '../mesh/types.js';
-import { cad } from '../mesh/index.js';
+// B3 correction (2026-10-06): no library-face cad aggregate — import the impl from its own module.
+import * as meshPrimitives from '../mesh/primitives.js';
 import { primitiveToBrepSolid } from '../primitives/brep-primitives.js';
-import { getCurrentStmt } from '../runtime-state.js';
+import { getCurrentStmt, getTessellation } from '../runtime-state.js';
 import { getBrepApi } from '../brep/handle-bridge.js';
 import { fromBrep } from '../shape.js';
 import { assignRoles } from '../topology/naming/roles.js';
 import { asPartName } from '../identity.js';
 import { defineOp } from '../sdk.js';
 import { assertPositiveNumber, assertNonNegativeNumber } from './assert.js';
-import { DEFAULT_LINEAR_DEFLECTION } from '../tolerance.js';
-import { mm } from '../units.js';
 // ── per-op 参数自校验（Phase 2.2；api 层被直接 import 时的防御层） ──
 /**
  * Validate box parameters (brepjs contract, §4.1 A 决策): `width`, `depth` and
@@ -94,7 +93,10 @@ function primitiveBrep(op, params) {
     // 改名/复用，StmtId 全局唯一，保证多个同类型 primitive 不撞 origin。
     const origin = String(getCurrentStmt()?.id ?? op);
     const roles = assignRoles(kernel, result.solid, op);
-    const segments = clampNRad((params.nRad ?? params.segments));
+    // Explicit segments/nRad wins ($fn override); otherwise derive from the global
+    // tessellation knob (proposal 2026-10-07) — default still 2π/64 ≈ 64 segments.
+    const rawSegments = (params.nRad ?? params.segments);
+    const segments = clampNRad(rawSegments ?? (2 * Math.PI) / getTessellation().angularDeflection);
     // P4 面级：brep 链基本体也挂契约序 faceRanges（编辑器默认 brep 链——
     // setFaceColor 必须可用）。box 的 OCCT 面枚举序（实测 0=−X,1=+Y,…）与契约
     // （+X/−X/+Y/−Y/+Z/−Z）不一致，按面法线重排 indices；cylinder/cone 的
@@ -161,7 +163,7 @@ function faceNormalAxis(mesh, triStart, triCount) {
 function brepPrimitiveMesh(kernel, solid, op, segments) {
     const angularDeflection = (2 * Math.PI) / Math.max(3, segments);
     const mesh = kernel.meshShape(solid, {
-        linearDeflection: DEFAULT_LINEAR_DEFLECTION.as(mm),
+        linearDeflection: getTessellation().linearDeflection,
         angularDeflection,
     });
     const shape = {
@@ -226,9 +228,9 @@ function brepPrimitiveMesh(kernel, solid, op, segments) {
  * @param params.segments - 细分度（影响三角化）。type:number 默认 64（= brepjs standard 等效，P0 §5.0/§5.1）
  * @example
  * const part0 = cad.box(10 * MM, 20 * MM, 30 * MM)
- * const part1 = cad.box(30 * MM, 20 * MM, 10 * MM, { centered: true, at: [1, 2, 3], segments: 64 })
+ * const part1 = cad.box(30 * MM, 20 * MM, 10 * MM, { at: [1, 2, 3], segments: 64 })
  *
- * 位置原生（§4.1/§6.2）：`box(width, depth, height)` 与 `box(10 * MM, 20 * MM, 30 * MM, {centered:true})`
+ * 位置原生（§4.1/§6.2）：`box(width, depth, height)` 与 `box(10 * MM, 20 * MM, 30 * MM, { at: [1, 2, 3] })`
  * 有量纲位必须写单位字面量（基准单位亦然，`10` 裸数字被 D8 R2 拒）。
  * 归一到同一对象（D11 位置→对象 + 尾参 options 合并）。旧 `{ size }` 对象形态已废弃（裁决 3），
  * 传入会抛 `E_ARGS_FORM`（错误提示 ≠ 兼容，§4.1）。
@@ -237,7 +239,7 @@ export const box = defineOp({
     name: 'box',
     mesh: (params) => {
         assertBoxParams(params);
-        return cad.box(params);
+        return meshPrimitives.box(params);
     },
     brep: (params) => {
         assertBoxParams(params);
@@ -279,7 +281,7 @@ export const sphere = defineOp({
     name: 'sphere',
     mesh: (params) => {
         assertSphereParams(params);
-        return cad.sphere(centerParams(params));
+        return meshPrimitives.sphere(centerParams(params));
     },
     brep: (params) => {
         assertSphereParams(params);
@@ -318,9 +320,9 @@ function centerParams(params) {
  * @param params.segments - 细分度（影响三角化）。type:number 默认 64（= brepjs standard 等效，P0 §5.0/§5.1）
  * @example
  * const c = cad.cylinder(5, 40)
- * const c = cad.cylinder(5, 40, { centered: true, at: [0, 0, 20], segments: 64 })
+ * const c = cad.cylinder(5, 40, { at: [0, 0, 20], segments: 64 })
  *
- * 位置原生（§4.1/§6.2）：`cylinder(5, 40)` 与 `cylinder(5, 40, {centered:true})`
+ * 位置原生（§4.1/§6.2）：`cylinder(5, 40)` 与 `cylinder(5, 40, { at: [0, 0, 20] })`
  * 归一到同一对象（D11 位置→装箱 + 尾参 options 合并）。旧 `{ center }` 对象形态已废弃
  * （裁决 3），传入会抛 `E_ARGS_FORM`（错误提示 ≠ 兼容，§4.3）。
   */
@@ -328,7 +330,7 @@ export const cylinder = defineOp({
     name: 'cylinder',
     mesh: (params) => {
         assertCylinderParams(params);
-        return cad.cylinder(params);
+        return meshPrimitives.cylinder(params);
     },
     brep: (params) => {
         assertCylinderParams(params);
@@ -359,8 +361,8 @@ export const cylinder = defineOp({
  * @param params.segments - 细分度（影响三角化）。type:number 默认 64（= brepjs standard 等效，P0 §5.0/§5.1）
  * @example
  * const c = cad.cone(10, 4, 30)
- * const c = cad.cone(10, 0, 30, { centered: true, at: [0, 0, 20], segments: 64 })
- * 位置原生（§4.1/§6.2）：`cone(10, 4, 30)` 与 `cone(10, 4, 30, { centered: true })`
+ * const c = cad.cone(10, 0, 30, { at: [0, 0, 20], segments: 64 })
+ * 位置原生（§4.1/§6.2）：`cone(10, 4, 30)` 与 `cone(10, 4, 30, { at: [0, 0, 20] })`
  * 归一到同一对象（D11 位置→装箱 + 尾参 options 合并）。旧 `{ center }`/`{ size }` 对象形态
  * 已废弃（裁决 3），传入会抛 E_ARGS_FORM（错误提示 ≠ 兼容）。
   */
@@ -368,7 +370,7 @@ export const cone = defineOp({
     name: 'cone',
     mesh: (params) => {
         assertConeParams(params);
-        return cad.cone(params);
+        return meshPrimitives.cone(params);
     },
     brep: (params) => {
         assertConeParams(params);
@@ -409,7 +411,7 @@ export const wedge = defineOp({
     name: 'wedge',
     mesh: (params) => {
         assertWedgeParams(params);
-        return cad.wedge(params);
+        return meshPrimitives.wedge(params);
     },
     brep: (params) => {
         assertWedgeParams(params);

package/dist/api/primitives.js.map

@@ -1 +1 @@
-{"version":3,"file":"primitives.js","sourceRoot":"","sources":["../../src/api/primitives.ts"],"names":[],"mappings":"AAAA;;;;;GAKG;AAGH,OAAO,EAAE,SAAS,EAAE,MAAM,eAAe,CAAA;AACzC,OAAO,EAAE,GAAG,EAAE,MAAM,SAAS,CAAA;AAC7B,OAAO,EAAE,oBAAoB,EAAE,MAAM,+BAA+B,CAAA;AACpE,OAAO,EAAE,cAAc,EAAE,MAAM,kBAAkB,CAAA;AACjD,OAAO,EAAE,UAAU,EAAE,MAAM,uBAAuB,CAAA;AAClD,OAAO,EAAE,QAAQ,EAAE,MAAM,UAAU,CAAA;AACnC,OAAO,EAAE,WAAW,EAAE,MAAM,0BAA0B,CAAA;AAEtD,OAAO,EAAE,UAAU,EAAE,MAAM,aAAa,CAAA;AACxC,OAAO,EAAE,QAAQ,EAAE,MAAM,QAAQ,CAAA;AACjC,OAAO,EAAE,oBAAoB,EAAE,uBAAuB,EAAE,MAAM,UAAU,CAAA;AAGxE,OAAO,EAAE,yBAAyB,EAAE,MAAM,cAAc,CAAA;AACxD,OAAO,EAAE,EAAE,EAAE,MAAM,UAAU,CAAA;AAE7B,sDAAsD;AAEtD;;;;;;GAMG;AACH,MAAM,UAAU,eAAe,CAAC,MAA+B;IAC7D,IAAI,MAAM,CAAC,IAAI,KAAK,SAAS,EAAE,CAAC;QAC9B,MAAM,IAAI,KAAK,CACb,6EAA6E;YAC7E,0EAA0E,CAC3E,CAAA;IACH,CAAC;IACD,oBAAoB,CAAC,MAAM,CAAC,KAAK,EAAE,WAAW,CAAC,CAAA;IAC/C,oBAAoB,CAAC,MAAM,CAAC,KAAK,EAAE,WAAW,CAAC,CAAA;IAC/C,oBAAoB,CAAC,MAAM,CAAC,MAAM,EAAE,YAAY,CAAC,CAAA;AACnD,CAAC;AAED;;;GAGG;AACH,MAAM,UAAU,kBAAkB,CAAC,MAA+B;IAChE,oBAAoB,CAAC,MAAM,CAAC,MAAM,EAAE,eAAe,CAAC,CAAA;AACtD,CAAC;AAED;;;;;;GAMG;AACH,MAAM,UAAU,oBAAoB,CAAC,MAA+B;IAClE,IAAI,MAAM,CAAC,MAAM,KAAK,SAAS,IAAI,MAAM,CAAC,IAAI,KAAK,SAAS,EAAE,CAAC;QAC7D,MAAM,IAAI,KAAK,CACb,yEAAyE;YACzE,8EAA8E,CAC/E,CAAA;IACH,CAAC;IACD,oBAAoB,CAAC,MAAM,CAAC,MAAM,EAAE,iBAAiB,CAAC,CAAA;IACtD,oBAAoB,CAAC,MAAM,CAAC,MAAM,EAAE,iBAAiB,CAAC,CAAA;AACxD,CAAC;AAED;;;;;;;GAOG;AACH,MAAM,UAAU,gBAAgB,CAAC,MAA+B;IAC9D,IAAI,MAAM,CAAC,MAAM,KAAK,SAAS,IAAI,MAAM,CAAC,IAAI,KAAK,SAAS,EAAE,CAAC;QAC7D,MAAM,IAAI,KAAK,CACb,qEAAqE;YACrE,uFAAuF,CACxF,CAAA;IACH,CAAC;IACD,oBAAoB,CAAC,MAAM,CAAC,YAAY,EAAE,mBAAmB,CAAC,CAAA;IAC9D,uBAAuB,CAAC,MAAM,CAAC,SAAS,EAAE,gBAAgB,CAAC,CAAA;IAC3D,oBAAoB,CAAC,MAAM,CAAC,MAAM,EAAE,aAAa,CAAC,CAAA;AACpD,CAAC;AAED;;;;GAIG;AACH,MAAM,UAAU,iBAAiB,CAAC,MAA+B;IAC/D,oBAAoB,CAAC,MAAM,CAAC,KAAK,EAAE,aAAa,CAAC,CAAA;IACjD,oBAAoB,CAAC,MAAM,CAAC,MAAM,EAAE,cAAc,CAAC,CAAA;IACnD,oBAAoB,CAAC,MAAM,CAAC,KAAK,EAAE,aAAa,CAAC,CAAA;IACjD,oBAAoB,CAAC,MAAM,CAAC,MAAM,EAAE,cAAc,CAAC,CAAA;AACrD,CAAC;AAED,oEAAoE;AACpE,SAAS,aAAa,CAAC,EAAU,EAAE,MAA+B;IAChE,MAAM,MAAM,GAAG,UAAU,EAAE,CAAA;IAC3B,MAAM,IAAI,GAAG,EAAE,KAAK,KAAK,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,CAAA;IACvC,MAAM,MAAM,GAAG,oBAAoB,CAAC,MAAM,EAAE,IAAyD,EAAE,MAAe,CAAC,CAAA;IACvH,0DAA0D;IAC1D,gCAAgC;IAChC,2DAA2D;IAC3D,iDAAiD;IACjD,MAAM,MAAM,GAAG,MAAM,CAAC,cAAc,EAAE,EAAE,EAAE,IAAI,EAAE,CAAC,CAAA;IACjD,MAAM,KAAK,GAAG,WAAW,CAAC,MAAM,EAAE,MAAM,CAAC,KAAK,EAAE,EAAE,CAAC,CAAA;IACnD,MAAM,QAAQ,GAAG,SAAS,CAAC,CAAC,MAAM,CAAC,IAAI,IAAI,MAAM,CAAC,QAAQ,CAAW,CAAC,CAAA;IACtE,iDAAiD;IACjD,wDAAwD;IACxD,wDAAwD;IACxD,0DAA0D;IAC1D,kBAAkB;IAClB,MAAM,EAAE,KAAK,EAAE,UAAU,EAAE,GAAG,iBAAiB,CAAC,MAAM,EAAE,MAAM,CAAC,KAAK,EAAE,EAAE,EAAE,QAAQ,CAAC,CAAA;IACnF,IAAI,UAAU;QAAE,KAAK,CAAC,UAAU,GAAG,UAAU,CAAA;IAC7C,OAAO,QAAQ,CACb,KAAK,EACL,EAAE,KAAK,EAAE,MAAM,CAAC,KAAK,EAAE,SAAS,EAAE,IAAI,GAAG,CAAC,CAAC,CAAC,UAAU,CAAC,MAAM,CAAC,EAAE,KAAK,CAAC,CAAC,CAAC,EAAE,CAC3E,CAAA;AACH,CAAC;AAED,qDAAqD;AACrD,SAAS,cAAc,CACrB,IAAoB,EACpB,QAAgB,EAChB,QAAgB;IAEhB,IAAI,EAAE,GAAG,CAAC,CAAA;IACV,IAAI,EAAE,GAAG,CAAC,CAAA;IACV,IAAI,EAAE,GAAG,CAAC,CAAA;IACV,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,QAAQ,EAAE,CAAC,EAAE,EAAE,CAAC;QAClC,MAAM,EAAE,GAAG,IAAI,CAAC,OAAO,CAAC,CAAC,QAAQ,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,CAAA;QAC3C,MAAM,EAAE,GAAG,IAAI,CAAC,OAAO,CAAC,CAAC,QAAQ,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAA;QAC/C,MAAM,EAAE,GAAG,IAAI,CAAC,OAAO,CAAC,CAAC,QAAQ,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAA;QAC/C,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC;QAAC,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC;QAAC,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,CAAC,CAAA;QAClH,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC;QAAC,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC;QAAC,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,CAAC,CAAA;QAClH,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC;QAAC,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC;QAAC,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,CAAC,CAAA;QAClH,MAAM,EAAE,GAAG,GAAG,GAAG,GAAG,CAAC;QAAC,MAAM,EAAE,GAAG,GAAG,GAAG,GAAG,CAAC;QAAC,MAAM,EAAE,GAAG,GAAG,GAAG,GAAG,CAAA;QAChE,MAAM,EAAE,GAAG,GAAG,GAAG,GAAG,CAAC;QAAC,MAAM,EAAE,GAAG,GAAG,GAAG,GAAG,CAAC;QAAC,MAAM,EAAE,GAAG,GAAG,GAAG,GAAG,CAAA;QAChE,MAAM,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,CAAA;QAC5B,MAAM,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,CAAA;QAC5B,MAAM,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,CAAA;QAC5B,MAAM,GAAG,GAAG,IAAI,CAAC,KAAK,CAAC,EAAE,EAAE,EAAE,EAAE,EAAE,CAAC,CAAA;QAClC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,GAAG,CAAC,IAAI,GAAG,GAAG,KAAK;YAAE,SAAQ;QAClD,EAAE,IAAI,EAAE,CAAC;QAAC,EAAE,IAAI,EAAE,CAAC;QAAC,EAAE,IAAI,EAAE,CAAA;IAC9B,CAAC;IACD,MAAM,EAAE,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,CAAC;IAAC,MAAM,EAAE,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,CAAC;IAAC,MAAM,EAAE,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,CAAA;IACzE,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,EAAE,GAAG,EAAE,GAAG,EAAE,CAAC,IAAI,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,KAAK;QAAE,OAAO,IAAI,CAAA;IACvE,IAAI,EAAE,IAAI,EAAE,IAAI,EAAE,IAAI,EAAE;QAAE,OAAO,EAAE,IAAI,EAAE,CAAC,EAAE,IAAI,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAA;IACnE,IAAI,EAAE,IAAI,EAAE,IAAI,EAAE,IAAI,EAAE;QAAE,OAAO,EAAE,IAAI,EAAE,CAAC,EAAE,IAAI,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAA;IACnE,OAAO,EAAE,IAAI,EAAE,CAAC,EAAE,IAAI,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAA;AAC3C,CAAC;AAED;;;;;;;GAOG;AACH,SAAS,iBAAiB,CACxB,MAAqB,EACrB,KAAiB,EACjB,EAAU,EACV,QAAgB;IAEhB,MAAM,iBAAiB,GAAG,CAAC,CAAC,GAAG,IAAI,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,QAAQ,CAAC,CAAA;IAC/D,MAAM,IAAI,GAAG,MAAM,CAAC,SAAS,CAAC,KAAK,EAAE;QACnC,gBAAgB,EAAE,yBAAyB,CAAC,EAAE,CAAC,EAAE,CAAC;QAClD,iBAAiB;KAClB,CAAC,CAAA;IACF,MAAM,KAAK,GAAU;QACnB,SAAS,EAAE,IAAI,YAAY,CAAC,IAAI,CAAC,SAAS,CAAC;QAC3C,OAAO,EAAE,IAAI,WAAW,CAAC,IAAI,CAAC,OAAO,CAAC;KACvC,CAAA;IACD,MAAM,EAAE,GAAG,IAAI,CAAC,UAAU,CAAA;IAC1B,IAAI,CAAC,EAAE;QAAE,OAAO,EAAE,KAAK,EAAE,CAAA;IACzB,MAAM,KAAK,GAAkD,EAAE,CAAA;IAC/D,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,EAAE,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC;QACvC,KAAK,CAAC,IAAI,CAAC,EAAE,QAAQ,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,EAAE,QAAQ,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,CAAA;IACtE,CAAC;IACD,IAAI,EAAE,KAAK,KAAK,IAAI,KAAK,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;QACvC,qDAAqD;QACrD,MAAM,UAAU,GAA8C,IAAI,KAAK,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,SAAS,CAAC,CAAA;QAC1F,KAAK,MAAM,CAAC,IAAI,KAAK,EAAE,CAAC;YACtB,MAAM,EAAE,GAAG,cAAc,CAAC,IAAI,EAAE,CAAC,CAAC,QAAQ,EAAE,CAAC,CAAC,QAAQ,CAAC,CAAA;YACvD,IAAI,CAAC,EAAE;gBAAE,OAAO,EAAE,KAAK,EAAE,CAAA;YACzB,MAAM,GAAG,GAAG,EAAE,CAAC,IAAI,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,IAAI,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,IAAI,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,IAAI,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,IAAI,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAA;YACjH,IAAI,UAAU,CAAC,GAAG,CAAC,KAAK,SAAS;gBAAE,OAAO,EAAE,KAAK,EAAE,CAAA,CAAC,cAAc;YAClE,UAAU,CAAC,GAAG,CAAC,GAAG,CAAC,CAAA;QACrB,CAAC;QACD,IAAI,UAAU,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,KAAK,SAAS,CAAC;YAAE,OAAO,EAAE,KAAK,EAAE,CAAA;QAC7D,MAAM,UAAU,GAAG,IAAI,WAAW,CAAC,IAAI,CAAC,OAAO,CAAC,MAAM,CAAC,CAAA;QACvD,MAAM,UAAU,GAAqC,EAAE,CAAA;QACvD,IAAI,MAAM,GAAG,CAAC,CAAA;QACd,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC;YAC3B,MAAM,CAAC,GAAG,UAAU,CAAC,CAAC,CAAE,CAAA;YACxB,UAAU,CAAC,IAAI,CAAC,EAAE,KAAK,EAAE,MAAM,EAAE,KAAK,EAAE,CAAC,CAAC,QAAQ,EAAE,CAAC,CAAA;YACrD,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,CAAC,CAAC,QAAQ,EAAE,CAAC,EAAE,EAAE,CAAC;gBACpC,UAAU,CAAC,CAAC,MAAM,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,IAAI,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,QAAQ,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,CAAA;gBACjE,UAAU,CAAC,CAAC,MAAM,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,GAAG,IAAI,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,QAAQ,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAA;gBACzE,UAAU,CAAC,CAAC,MAAM,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,GAAG,IAAI,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,QAAQ,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAA;YAC3E,CAAC;YACD,MAAM,IAAI,CAAC,CAAC,QAAQ,CAAA;QACtB,CAAC;QACD,OAAO,EAAE,KAAK,EAAE,EAAE,GAAG,KAAK,EAAE,OAAO,EAAE,UAAU,EAAE,EAAE,UAAU,EAAE,CAAA;IACjE,CAAC;IACD,IAAI,CAAC,EAAE,KAAK,UAAU,IAAI,EAAE,KAAK,MAAM,CAAC,IAAI,KAAK,CAAC,MAAM,IAAI,CAAC,EAAE,CAAC;QAC9D,8DAA8D;QAC9D,OAAO,EAAE,KAAK,EAAE,UAAU,EAAE,KAAK,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,EAAE,KAAK,EAAE,CAAC,CAAC,QAAQ,EAAE,KAAK,EAAE,CAAC,CAAC,QAAQ,EAAE,CAAC,CAAC,EAAE,CAAA;IAC5F,CAAC;IACD,OAAO,EAAE,KAAK,EAAE,CAAA;AAClB,CAAC;AAED;;;;;;;;;;;;;;;;;;;;;;KAsBK;AACL,MAAM,CAAC,MAAM,GAAG,GAAG,QAAQ,CAAC;IAC1B,IAAI,EAAE,KAAK;IACX,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,eAAe,CAAC,MAAM,CAAC,CAAA;QACvB,OAAO,GAAG,CAAC,GAAG,CAAC,MAAe,CAAC,CAAA;IACjC,CAAC;IACD,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,eAAe,CAAC,MAAM,CAAC,CAAA;QACvB,OAAO,aAAa,CAAC,KAAK,EAAE,MAAM,CAAC,CAAA;IACrC,CAAC;IACD,4CAA4C;IAC5C,MAAM,EAAE;QACN,KAAK,EAAE,QAAQ;QACf,KAAK,EAAE,QAAQ;QACf,MAAM,EAAE,QAAQ;QAChB,EAAE,EAAE,OAAO;QACX,QAAQ,EAAE,UAAU;QACpB,QAAQ,EAAE,SAAS;KACpB;IACD,2DAA2D;IAC3D,0CAA0C;IAC1C,OAAO,EAAE,EAAE,IAAI,EAAE,CAAC,OAAO,EAAE,OAAO,EAAE,QAAQ,CAAC,EAAE;IAC/C,SAAS,EAAE,EAAE,KAAK,EAAE,QAAQ,EAAE,KAAK,EAAE,QAAQ,EAAE,MAAM,EAAE,QAAQ,EAAE;IACjE,MAAM,EAAE,EAAE,IAAI,EAAE,WAAW,EAAE,QAAQ,EAAE,EAAE,GAAG,EAAE,UAAU,EAAE,KAAK,EAAE,CAAC,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,KAAK,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,QAAQ,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,OAAO,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,MAAM,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,MAAM,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,OAAO,EAAE,CAAC,EAAE,EAAgB;CAC/S,CAAC,CAAA;AAEF;;;;;;;;;;;;;;;;GAgBG;AACH,MAAM,CAAC,MAAM,MAAM,GAAG,QAAQ,CAAC;IAC7B,IAAI,EAAE,QAAQ;IACd,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,kBAAkB,CAAC,MAAM,CAAC,CAAA;QAC1B,OAAO,GAAG,CAAC,MAAM,CAAC,YAAY,CAAC,MAAM,CAAU,CAAC,CAAA;IAClD,CAAC;IACD,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,kBAAkB,CAAC,MAAM,CAAC,CAAA;QAC1B,OAAO,aAAa,CAAC,QAAQ,EAAE,YAAY,CAAC,MAAM,CAAC,CAAC,CAAA;IACtD,CAAC;IACD,MAAM,EAAE,EAAE,MAAM,EAAE,QAAQ,EAAE,QAAQ,EAAE,SAAS,EAAE,MAAM,EAAE,OAAO,EAAE,EAAE,EAAE,OAAO,EAAE;IAC/E,4EAA4E;IAC5E,yCAAyC;IACzC,OAAO,EAAE,EAAE,IAAI,EAAE,CAAC,QAAQ,CAAC,EAAE;IAC7B,SAAS,EAAE,EAAE,MAAM,EAAE,QAAQ,EAAE;IAC/B,MAAM,EAAE,EAAE,IAAI,EAAE,WAAW,EAAE,MAAM,EAAE,wCAAwC,EAAgB;CAC9F,CAAC,CAAA;AAEF;;;GAGG;AACH,SAAS,YAAY,CAAC,MAA+B;IACnD,IAAI,MAAM,CAAC,EAAE,KAAK,SAAS;QAAE,OAAO,EAAE,GAAG,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,EAAE,EAAE,CAAA;IACpE,OAAO,MAAM,CAAA;AACf,CAAC;AAED;;;;;;;;;;;;;;;;;;;;;;IAsBI;AACJ,MAAM,CAAC,MAAM,QAAQ,GAAG,QAAQ,CAAC;IAC/B,IAAI,EAAE,UAAU;IAChB,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,oBAAoB,CAAC,MAAM,CAAC,CAAA;QAC5B,OAAO,GAAG,CAAC,QAAQ,CAAC,MAAe,CAAC,CAAA;IACtC,CAAC;IACD,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,oBAAoB,CAAC,MAAM,CAAC,CAAA;QAC5B,OAAO,aAAa,CAAC,UAAU,EAAE,MAAM,CAAC,CAAA;IAC1C,CAAC;IACD,MAAM,EAAE,EAAE,MAAM,EAAE,QAAQ,EAAE,MAAM,EAAE,QAAQ,EAAE,EAAE,EAAE,OAAO,EAAE,QAAQ,EAAE,UAAU,EAAE,QAAQ,EAAE,SAAS,EAAE;IACtG,yEAAyE;IACzE,2BAA2B;IAC3B,OAAO,EAAE,EAAE,IAAI,EAAE,CAAC,QAAQ,EAAE,QAAQ,CAAC,EAAE;IACvC,SAAS,EAAE,EAAE,MAAM,EAAE,QAAQ,EAAE,MAAM,EAAE,QAAQ,EAAE;IACjD,MAAM,EAAE,EAAE,IAAI,EAAE,WAAW,EAAE,QAAQ,EAAE,EAAE,GAAG,EAAE,UAAU,EAAE,KAAK,EAAE,CAAC,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,KAAK,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,QAAQ,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,SAAS,EAAE,CAAC,EAAE,EAAgB;CACpM,CAAC,CAAA;AAEF;;;;;;;;;;;;;;;;;;;;;;IAsBI;AACJ,MAAM,CAAC,MAAM,IAAI,GAAG,QAAQ,CAAC;IAC3B,IAAI,EAAE,MAAM;IACZ,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,gBAAgB,CAAC,MAAM,CAAC,CAAA;QACxB,OAAO,GAAG,CAAC,IAAI,CAAC,MAAe,CAAC,CAAA;IAClC,CAAC;IACD,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,gBAAgB,CAAC,MAAM,CAAC,CAAA;QACxB,OAAO,aAAa,CAAC,MAAM,EAAE,MAAM,CAAC,CAAA;IACtC,CAAC;IACD,MAAM,EAAE;QACN,YAAY,EAAE,QAAQ;QACtB,SAAS,EAAE,QAAQ;QACnB,MAAM,EAAE,QAAQ;QAChB,EAAE,EAAE,OAAO;QACX,QAAQ,EAAE,UAAU;QACpB,QAAQ,EAAE,SAAS;KACpB;IACD,iFAAiF;IACjF,+DAA+D;IAC/D,OAAO,EAAE,EAAE,IAAI,EAAE,CAAC,cAAc,EAAE,WAAW,EAAE,QAAQ,CAAC,EAAE;IAC1D,SAAS,EAAE,EAAE,YAAY,EAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,EAAE,MAAM,EAAE,QAAQ,EAAE;IAC5E,MAAM,EAAE,EAAE,IAAI,EAAE,WAAW,EAAE,QAAQ,EAAE,EAAE,GAAG,EAAE,UAAU,EAAE,KAAK,EAAE,CAAC,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,KAAK,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,QAAQ,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,SAAS,EAAE,CAAC,EAAE,EAAgB;CACpM,CAAC,CAAA;AAEF;;;;;;;;;;;;;;;;IAgBI;AACJ,MAAM,CAAC,MAAM,KAAK,GAAG,QAAQ,CAAC;IAC5B,IAAI,EAAE,OAAO;IACb,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,iBAAiB,CAAC,MAAM,CAAC,CAAA;QACzB,OAAO,GAAG,CAAC,KAAK,CAAC,MAAe,CAAC,CAAA;IACnC,CAAC;IACD,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,iBAAiB,CAAC,MAAM,CAAC,CAAA;QACzB,OAAO,aAAa,CAAC,OAAO,EAAE,MAAM,CAAC,CAAA;IACvC,CAAC;IACD,6FAA6F;IAC7F,OAAO,EAAE,EAAE,IAAI,EAAE,CAAC,OAAO,EAAE,QAAQ,EAAE,OAAO,EAAE,QAAQ,CAAC,EAAE;IACzD,SAAS,EAAE,EAAE,KAAK,EAAE,QAAQ,EAAE,MAAM,EAAE,QAAQ,EAAE,KAAK,EAAE,OAAO,EAAE,MAAM,EAAE,QAAQ,EAAE;IAClF,MAAM,EAAE,EAAE,IAAI,EAAE,WAAW,EAAE,MAAM,EAAE,uCAAuC,EAAgB;CAC7F,CAAC,CAAA","sourcesContent":["/**\n * api primitives — 基本体创建库函数（box/sphere/cylinder/cone/wedge）\n *\n *\n * dispatchPath 静态判定 brep/mesh，产物经 solid()/fromBrep() 构造器创建。\n */\n\nimport type { Shape } from '../mesh/types'\nimport { clampNRad } from '../mesh/types'\nimport { cad } from '../mesh'\nimport { primitiveToBrepSolid } from '../primitives/brep-primitives'\nimport { getCurrentStmt } from '../runtime-state'\nimport { getBrepApi } from '../brep/handle-bridge'\nimport { fromBrep } from '../shape'\nimport { assignRoles } from '../topology/naming/roles'\nimport type { Provenance } from '../topology/naming/lineage'\nimport { asPartName } from '../identity'\nimport { defineOp } from '../sdk'\nimport { assertPositiveNumber, assertNonNegativeNumber } from './assert'\nimport type { BrepMeshResult, BrepHandle } from '../brep/engine/types'\nimport type { BrepEngineApi } from '../brep/engine/primitives'\nimport { DEFAULT_LINEAR_DEFLECTION } from '../tolerance'\nimport { mm } from '../units'\n\n// ── per-op 参数自校验（Phase 2.2；api 层被直接 import 时的防御层） ──\n\n/**\n * Validate box parameters (brepjs contract, §4.1 A 决策): `width`, `depth` and\n * `height` must be positive numbers. The legacy `{ size }` object form is\n * removed — any call still passing `size` throws an explicit `E_ARGS_FORM`\n * error pointing at the new signature (error hint ≠ compatibility).\n * @param params - the raw box operation parameters.\n */\nexport function assertBoxParams(params: Record<string, unknown>): void {\n  if (params.size !== undefined) {\n    throw new Error(\n      '[faijs/args] box: E_ARGS_FORM: the `box({ size })` object form is removed. ' +\n      'box now uses `box(width, depth, height, { at?, centered?, segments? })`.',\n    )\n  }\n  assertPositiveNumber(params.width, 'box.width')\n  assertPositiveNumber(params.depth, 'box.depth')\n  assertPositiveNumber(params.height, 'box.height')\n}\n\n/**\n * Validate sphere parameters: `radius` must be a positive number.\n * @param params - the raw sphere operation parameters.\n */\nexport function assertSphereParams(params: Record<string, unknown>): void {\n  assertPositiveNumber(params.radius, 'sphere.radius')\n}\n\n/**\n * Validate cylinder parameters (brepjs contract, §4.3 A 决策): `radius` and\n * `height` must be positive. The legacy `{ center }` object key is removed — any\n * call still passing `center` throws an explicit `E_ARGS_FORM` error pointing at\n * the new signature (error hint ≠ compatibility, 裁决 3).\n * @param params - the raw cylinder operation parameters.\n */\nexport function assertCylinderParams(params: Record<string, unknown>): void {\n  if (params.center !== undefined || params.size !== undefined) {\n    throw new Error(\n      '[faijs/args] cylinder: E_ARGS_FORM: the legacy object form is removed. ' +\n      'cylinder now uses `cylinder(radius, height, { at?, centered?, segments? })`.',\n    )\n  }\n  assertPositiveNumber(params.radius, 'cylinder.radius')\n  assertPositiveNumber(params.height, 'cylinder.height')\n}\n\n/**\n * Validate cone parameters (brepjs contract, §4.1 P 决策): `radiusBottom` and\n * `height` must be positive, `radiusTop` must be non-negative. The legacy\n * `{ center }` object key is removed — any call still passing `center` throws an\n * explicit `E_ARGS_FORM` error pointing at the new signature (error hint ≠\n * compatibility, 裁决 3).\n * @param params - the raw cone operation parameters.\n */\nexport function assertConeParams(params: Record<string, unknown>): void {\n  if (params.center !== undefined || params.size !== undefined) {\n    throw new Error(\n      '[faijs/args] cone: E_ARGS_FORM: the legacy object form is removed. ' +\n      'cone now uses `cone(bottomRadius, topRadius, height, { at?, centered?, segments? })`.',\n    )\n  }\n  assertPositiveNumber(params.radiusBottom, 'cone.radiusBottom')\n  assertNonNegativeNumber(params.radiusTop, 'cone.radiusTop')\n  assertPositiveNumber(params.height, 'cone.height')\n}\n\n/**\n * Validate wedge parameters: `width`, `height`, `angle`, and `length` must be\n * positive numbers.\n * @param params - the raw wedge operation parameters.\n */\nexport function assertWedgeParams(params: Record<string, unknown>): void {\n  assertPositiveNumber(params.width, 'wedge.width')\n  assertPositiveNumber(params.height, 'wedge.height')\n  assertPositiveNumber(params.angle, 'wedge.angle')\n  assertPositiveNumber(params.length, 'wedge.length')\n}\n\n/** BREP 路径：OCCT 精确构造 + 三角化 + fromBrep 登记（基本体无面演化；链根建 roleTable）。 */\nfunction primitiveBrep(op: string, params: Record<string, unknown>): Shape {\n  const kernel = getBrepApi()\n  const type = op === 'box' ? 'cube' : op\n  const result = primitiveToBrepSolid(kernel, type as 'cube' | 'sphere' | 'cylinder' | 'cone' | 'wedge', params as never)\n  // §3.2：链根建表——语义命名器按 op 类型给面命名（semantic 'top'/'lateral' 等，\n  // Phase 1.7 已删 'box:' 前缀与位置兜底）。\n  // Phase 1.6：origin 用链根语句的 StmtId（当前语句 id，§2.2/§4.1）——变量名会被\n  // 改名/复用，StmtId 全局唯一，保证多个同类型 primitive 不撞 origin。\n  const origin = String(getCurrentStmt()?.id ?? op)\n  const roles = assignRoles(kernel, result.solid, op)\n  const segments = clampNRad((params.nRad ?? params.segments) as number)\n  // P4 面级：brep 链基本体也挂契约序 faceRanges（编辑器默认 brep 链——\n  // setFaceColor 必须可用）。box 的 OCCT 面枚举序（实测 0=−X,1=+Y,…）与契约\n  // （+X/−X/+Y/−Y/+Z/−Z）不一致，按面法线重排 indices；cylinder/cone 的\n  // OCCT 序与契约一致（实测锁定：cylinder 0=侧面,1=顶,2=底；cone radiusTop=0\n  // 0=侧面,1=底），直接透传。\n  const { shape, faceRanges } = brepPrimitiveMesh(kernel, result.solid, op, segments)\n  if (faceRanges) shape.faceRanges = faceRanges\n  return fromBrep(\n    shape,\n    { solid: result.solid, roleTable: new Map([[asPartName(origin), roles]]) },\n  )\n}\n\n/** 面法线主轴向：用该面非退化三角形的法线和定轴与符号（OCCT 统一 outward 绕向）。 */\nfunction faceNormalAxis(\n  mesh: BrepMeshResult,\n  triStart: number,\n  triCount: number,\n): { axis: 0 | 1 | 2; sign: 1 | -1 } | null {\n  let sx = 0\n  let sy = 0\n  let sz = 0\n  for (let t = 0; t < triCount; t++) {\n    const i0 = mesh.indices[(triStart + t) * 3]\n    const i1 = mesh.indices[(triStart + t) * 3 + 1]\n    const i2 = mesh.indices[(triStart + t) * 3 + 2]\n    const p0x = mesh.positions[i0 * 3]; const p0y = mesh.positions[i0 * 3 + 1]; const p0z = mesh.positions[i0 * 3 + 2]\n    const p1x = mesh.positions[i1 * 3]; const p1y = mesh.positions[i1 * 3 + 1]; const p1z = mesh.positions[i1 * 3 + 2]\n    const p2x = mesh.positions[i2 * 3]; const p2y = mesh.positions[i2 * 3 + 1]; const p2z = mesh.positions[i2 * 3 + 2]\n    const ux = p1x - p0x; const uy = p1y - p0y; const uz = p1z - p0z\n    const vx = p2x - p0x; const vy = p2y - p0y; const vz = p2z - p0z\n    const nx = uy * vz - uz * vy\n    const ny = uz * vx - ux * vz\n    const nz = ux * vy - uy * vx\n    const len = Math.hypot(nx, ny, nz)\n    if (!Number.isFinite(len) || len < 1e-12) continue\n    sx += nx; sy += ny; sz += nz\n  }\n  const ax = Math.abs(sx); const ay = Math.abs(sy); const az = Math.abs(sz)\n  if (!Number.isFinite(ax + ay + az) || ax + ay + az < 1e-12) return null\n  if (ax >= ay && ax >= az) return { axis: 0, sign: sx > 0 ? 1 : -1 }\n  if (ay >= ax && ay >= az) return { axis: 1, sign: sy > 0 ? 1 : -1 }\n  return { axis: 2, sign: sz > 0 ? 1 : -1 }\n}\n\n/**\n * 三角化基本体并附 P4 契约序 faceRanges。\n * faceGroups 三元组 = [triStart, triCount, faceHash]，前两元是索引单位\n * （brep-ops.ts 注释）→ 三角形单位 = 索引/3。\n * - box：6 面 → 按面法线重排 indices 到契约序（0=+X,1=−X,2=+Y,3=−Y,4=+Z,5=−Z）。\n * - cylinder/cone：OCCT 枚举序与契约一致（探针实测锁定），直接透传，不重排。\n * - wedge/sphere 及其它：无契约，不挂 faceRanges（setFaceColor 抛 E_FACE_UNAVAILABLE）。\n */\nfunction brepPrimitiveMesh(\n  kernel: BrepEngineApi,\n  solid: BrepHandle,\n  op: string,\n  segments: number,\n): { shape: Shape; faceRanges?: Shape['faceRanges'] } {\n  const angularDeflection = (2 * Math.PI) / Math.max(3, segments)\n  const mesh = kernel.meshShape(solid, {\n    linearDeflection: DEFAULT_LINEAR_DEFLECTION.as(mm),\n    angularDeflection,\n  })\n  const shape: Shape = {\n    positions: new Float32Array(mesh.positions),\n    indices: new Uint32Array(mesh.indices),\n  }\n  const fg = mesh.faceGroups\n  if (!fg) return { shape }\n  const faces: Array<{ triStart: number; triCount: number }> = []\n  for (let f = 0; f < fg.length / 3; f++) {\n    faces.push({ triStart: fg[f * 3] / 3, triCount: fg[f * 3 + 1] / 3 })\n  }\n  if (op === 'box' && faces.length === 6) {\n    // 契约序重排：每面判向 → 契约 idx（+X=0,−X=1,+Y=2,−Y=3,+Z=4,−Z=5）\n    const byContract: Array<(typeof faces)[number] | undefined> = new Array(6).fill(undefined)\n    for (const f of faces) {\n      const na = faceNormalAxis(mesh, f.triStart, f.triCount)\n      if (!na) return { shape }\n      const idx = na.axis === 0 ? (na.sign > 0 ? 0 : 1) : na.axis === 1 ? (na.sign > 0 ? 2 : 3) : (na.sign > 0 ? 4 : 5)\n      if (byContract[idx] !== undefined) return { shape } // 法线判向歧义 → 不挂\n      byContract[idx] = f\n    }\n    if (byContract.some((f) => f === undefined)) return { shape }\n    const newIndices = new Uint32Array(mesh.indices.length)\n    const faceRanges: NonNullable<Shape['faceRanges']> = []\n    let outTri = 0\n    for (let c = 0; c < 6; c++) {\n      const f = byContract[c]!\n      faceRanges.push({ start: outTri, count: f.triCount })\n      for (let t = 0; t < f.triCount; t++) {\n        newIndices[(outTri + t) * 3] = mesh.indices[(f.triStart + t) * 3]\n        newIndices[(outTri + t) * 3 + 1] = mesh.indices[(f.triStart + t) * 3 + 1]\n        newIndices[(outTri + t) * 3 + 2] = mesh.indices[(f.triStart + t) * 3 + 2]\n      }\n      outTri += f.triCount\n    }\n    return { shape: { ...shape, indices: newIndices }, faceRanges }\n  }\n  if ((op === 'cylinder' || op === 'cone') && faces.length >= 2) {\n    // OCCT 枚举序 = P4a 契约序（探针实测）：0=侧面, 1=顶, 2=底（cone 无顶盖时 0=侧面,1=底）\n    return { shape, faceRanges: faces.map((f) => ({ start: f.triStart, count: f.triCount })) }\n  }\n  return { shape }\n}\n\n/**\n * 创建长方体（brepjs 契约，§4.1 A 决策）。\n * @group 创建\n * @inputs 0\n * @async false\n * @qual ok\n * @name box\n * @returns Shape 长方体几何，可作为后续 op 的输入。\n * @param params.width - X 方向边长（mm）。type:number required:true\n * @param params.depth - Y 方向边长（mm）。type:number required:true\n * @param params.height - Z 方向边长（mm）。type:number required:true\n * @param params.at - 中心点（CENTER 语义，优先于 centered）。type:[x,y,z] 可选\n * @param params.centered - 无 at 时是否居中到原点（type:boolean 默认 false，角点在原点）。\n * @param params.segments - 细分度（影响三角化）。type:number 默认 64（= brepjs standard 等效，P0 §5.0/§5.1）\n * @example\n * const part0 = cad.box(10 * MM, 20 * MM, 30 * MM)\n * const part1 = cad.box(30 * MM, 20 * MM, 10 * MM, { centered: true, at: [1, 2, 3], segments: 64 })\n *\n * 位置原生（§4.1/§6.2）：`box(width, depth, height)` 与 `box(10 * MM, 20 * MM, 30 * MM, {centered:true})`\n * 有量纲位必须写单位字面量（基准单位亦然，`10` 裸数字被 D8 R2 拒）。\n * 归一到同一对象（D11 位置→对象 + 尾参 options 合并）。旧 `{ size }` 对象形态已废弃（裁决 3），\n * 传入会抛 `E_ARGS_FORM`（错误提示 ≠ 兼容，§4.1）。\n   */\nexport const box = defineOp({\n  name: 'box',\n  mesh: (params: Record<string, unknown>) => {\n    assertBoxParams(params)\n    return cad.box(params as never)\n  },\n  brep: (params: Record<string, unknown>) => {\n    assertBoxParams(params)\n    return primitiveBrep('box', params)\n  },\n  // schema feeds codegen/UI parameter panels.\n  schema: {\n    width: 'number',\n    depth: 'number',\n    height: 'number',\n    at: 'vec3?',\n    centered: 'boolean?',\n    segments: 'number?',\n  },\n  // D11 位置→对象（§4.1/§6.2）：三个标量装箱成 { width, depth, height }，尾参\n  // options 经 dual-form-args 的尾参合并（§6.2）并入。\n  slotMap: { keys: ['width', 'depth', 'height'] },\n  paramDims: { width: 'length', depth: 'length', height: 'length' },\n  naming: { kind: 'construct', newFaces: { via: 'explicit', vocab: [{ kind: 'semantic', name: 'top' }, { kind: 'semantic', name: 'bottom' }, { kind: 'semantic', name: 'front' }, { kind: 'semantic', name: 'back' }, { kind: 'semantic', name: 'left' }, { kind: 'semantic', name: 'right' }] } } as Provenance,\n})\n\n/**\n * 创建球体。\n * @group 创建\n * @inputs 0\n * @async false\n * @qual ok\n * @name sphere\n * @returns Shape 球体几何，可作为后续 op 的输入。\n * @param params.radius - 半径（mm）。type:number required:true\n * @param params.segments - 细分度（影响面数）。type:number 默认 64（= brepjs standard 等效，P0 §5.0/§5.1）\n * @param params.center - 球心位置（at 的同义别名）。type:[x,y,z] 默认 [0,0,0]（原点）。\n * @param params.at - 球心位置（center 的同义别名，brepjs 契约；裁决 4 双形态合法）。\n * @example\n * const r = cad.sphere({ radius: 10 })\n * const r = cad.sphere(10, { at: [0, 0, 10], segments: 64 })\n * const r = cad.sphere({ radius: 10, segments: 64, center: [0,0,10] })\n */\nexport const sphere = defineOp({\n  name: 'sphere',\n  mesh: (params: Record<string, unknown>) => {\n    assertSphereParams(params)\n    return cad.sphere(centerParams(params) as never)\n  },\n  brep: (params: Record<string, unknown>) => {\n    assertSphereParams(params)\n    return primitiveBrep('sphere', centerParams(params))\n  },\n  schema: { radius: 'number', segments: 'number?', center: 'vec3?', at: 'vec3?' },\n  // D11: `sphere(10)` == `sphere({ radius: 10 })`; 尾参 options（{at, segments}）\n  // 经 dual-form-args 的尾参合并规则归一（裁决 4，§6.2）。\n  slotMap: { keys: ['radius'] },\n  paramDims: { radius: 'length' },\n  naming: { kind: 'unmodeled', reason: 'sphere face vocabulary pending Phase 3' } as Provenance,\n})\n\n/**\n * 位置归一：把 brepjs 契约的 `at`（= faijs 的 `center`，球心语义）归一为一个\n * `center` 输入，mesh/brep 两条消费路径共用（裁决 1/4，§4.2）。\n */\nfunction centerParams(params: Record<string, unknown>): Record<string, unknown> {\n  if (params.at !== undefined) return { ...params, center: params.at }\n  return params\n}\n\n/**\n * 创建圆柱体（brepjs 契约，§4.3 A 决策）。\n * 锚点：`at` 是**底面轴心**（BASE 语义，默认 [0,0,0]，底面在原点、+Z 延伸）；`centered:true`\n * 指底面落到 −h/2（无 at 时居中到原点；与 `at` 同给时以 `at` 为中心）。\n * @group 创建\n * @inputs 0\n * @async false\n * @qual ok\n * @name cylinder\n * @returns Shape 圆柱体几何，可作为后续 op 的输入。\n * @param params.radius - 底面半径（mm）。type:number required:true\n * @param params.height - 高度（mm），沿 +Z 轴。type:number required:true\n * @param params.at - 底面中心（BASE 语义）。type:[x,y,z] 可选\n * @param params.centered - 是否居中（底面 −h/2；与 at 同给时以 at 为中心）。type:boolean 默认 false\n * @param params.segments - 细分度（影响三角化）。type:number 默认 64（= brepjs standard 等效，P0 §5.0/§5.1）\n * @example\n * const c = cad.cylinder(5, 40)\n * const c = cad.cylinder(5, 40, { centered: true, at: [0, 0, 20], segments: 64 })\n *\n * 位置原生（§4.1/§6.2）：`cylinder(5, 40)` 与 `cylinder(5, 40, {centered:true})`\n * 归一到同一对象（D11 位置→装箱 + 尾参 options 合并）。旧 `{ center }` 对象形态已废弃\n * （裁决 3），传入会抛 `E_ARGS_FORM`（错误提示 ≠ 兼容，§4.3）。\n  */\nexport const cylinder = defineOp({\n  name: 'cylinder',\n  mesh: (params: Record<string, unknown>) => {\n    assertCylinderParams(params)\n    return cad.cylinder(params as never)\n  },\n  brep: (params: Record<string, unknown>) => {\n    assertCylinderParams(params)\n    return primitiveBrep('cylinder', params)\n  },\n  schema: { radius: 'number', height: 'number', at: 'vec3?', centered: 'boolean?', segments: 'number?' },\n  // D11（§4.1/§6.2）：`cylinder(5, 40)` 两个标量装箱成 { radius, height }；尾参 options\n  // 经 dual-form-args 尾参合并并入。\n  slotMap: { keys: ['radius', 'height'] },\n  paramDims: { radius: 'length', height: 'length' },\n  naming: { kind: 'construct', newFaces: { via: 'explicit', vocab: [{ kind: 'semantic', name: 'top' }, { kind: 'semantic', name: 'bottom' }, { kind: 'semantic', name: 'lateral' }] } } as Provenance,\n})\n\n/**\n * 创建圆锥体（brepjs 契约，§4.1 P 决策）。radiusTop 等于 radiusBottom 时即圆柱，0 为尖锥。\n * 锚点：`at` 是**底面轴心**（BASE 语义，默认 [0,0,0]，底面在原点、+Z 延伸）；`centered:true`\n * 指底面落到 −h/2（无 at 时居中到原点；与 `at` 同给时以 `at` 为中心）。\n * @group 创建\n * @inputs 0\n * @async false\n * @qual ok\n * @name cone\n * @returns Shape 圆锥体几何，可作为后续 op 的输入。\n * @param params.radiusBottom - 底半径（mm）。type:number required:true\n * @param params.radiusTop - 顶半径（mm），0 为尖锥，非负，等于 radiusBottom 得圆柱。type:number required:true\n * @param params.height - 高度（mm），沿 +Z 轴。type:number required:true\n * @param params.at - 底面轴心（BASE 语义）。type:[x,y,z] 可选\n * @param params.centered - 是否居中（底面 −h/2；与 at 同给时以 at 为中心）。type:boolean 默认 false\n * @param params.segments - 细分度（影响三角化）。type:number 默认 64（= brepjs standard 等效，P0 §5.0/§5.1）\n * @example\n * const c = cad.cone(10, 4, 30)\n * const c = cad.cone(10, 0, 30, { centered: true, at: [0, 0, 20], segments: 64 })\n * 位置原生（§4.1/§6.2）：`cone(10, 4, 30)` 与 `cone(10, 4, 30, { centered: true })`\n * 归一到同一对象（D11 位置→装箱 + 尾参 options 合并）。旧 `{ center }`/`{ size }` 对象形态\n * 已废弃（裁决 3），传入会抛 E_ARGS_FORM（错误提示 ≠ 兼容）。\n  */\nexport const cone = defineOp({\n  name: 'cone',\n  mesh: (params: Record<string, unknown>) => {\n    assertConeParams(params)\n    return cad.cone(params as never)\n  },\n  brep: (params: Record<string, unknown>) => {\n    assertConeParams(params)\n    return primitiveBrep('cone', params)\n  },\n  schema: {\n    radiusBottom: 'number',\n    radiusTop: 'number',\n    height: 'number',\n    at: 'vec3?',\n    centered: 'boolean?',\n    segments: 'number?',\n  },\n  // D11（§4.1/§6.2）: `cone(10, 4, 30)` 三个标量装箱成 { radiusBottom, radiusTop, height }。\n  // 尾参 options（{at, centered, segments}）经 dual-form-args 尾参合并并入。\n  slotMap: { keys: ['radiusBottom', 'radiusTop', 'height'] },\n  paramDims: { radiusBottom: 'length', radiusTop: 'length', height: 'length' },\n  naming: { kind: 'construct', newFaces: { via: 'explicit', vocab: [{ kind: 'semantic', name: 'top' }, { kind: 'semantic', name: 'bottom' }, { kind: 'semantic', name: 'lateral' }] } } as Provenance,\n})\n\n/**\n * 创建楔形体。唯一契约是 width/height/angle/length（width/height/angle 为正数，length 沿切割方向），\n * 旧文档的 size 形态已废弃，传 { size } 会抛错。\n * @group 创建\n * @inputs 0\n * @async false\n * @qual ok\n * @name wedge\n * @note 曾与 UI 面板的 `size` 形态并存并写入文档，但断言层确认唯一合法契约是 width/height/angle/length；传 `{ size }` 直接抛错。已按真源收敛。\n * @returns Shape 楔形体几何，可作为后续 op 的输入。\n * @param params.width - 底面宽度（mm）。type:number required:true\n * @param params.height - 高度（mm）。type:number required:true\n * @param params.angle - 楔形角度（度）。type:number required:true\n * @param params.length - 沿切割方向的长度（mm）。type:number required:true\n * @example\n * const w = cad.wedge({ width: 30, height: 20, angle: 45, length: 10 })\n  */\nexport const wedge = defineOp({\n  name: 'wedge',\n  mesh: (params: Record<string, unknown>) => {\n    assertWedgeParams(params)\n    return cad.wedge(params as never)\n  },\n  brep: (params: Record<string, unknown>) => {\n    assertWedgeParams(params)\n    return primitiveBrep('wedge', params)\n  },\n  // D11: `wedge(30, 20, 45, 10)` == `wedge({ width: 30, height: 20, angle: 45, length: 10 })`.\n  slotMap: { keys: ['width', 'height', 'angle', 'length'] },\n  paramDims: { width: 'length', height: 'length', angle: 'angle', length: 'length' },\n  naming: { kind: 'unmodeled', reason: 'wedge face vocabulary pending Phase 3' } as Provenance,\n})\n"]}
+{"version":3,"file":"primitives.js","sourceRoot":"","sources":["../../src/api/primitives.ts"],"names":[],"mappings":"AAAA;;;;;GAKG;AAGH,OAAO,EAAE,SAAS,EAAE,MAAM,eAAe,CAAA;AACzC,mGAAmG;AACnG,OAAO,KAAK,cAAc,MAAM,oBAAoB,CAAA;AACpD,OAAO,EAAE,oBAAoB,EAAE,MAAM,+BAA+B,CAAA;AACpE,OAAO,EAAE,cAAc,EAAE,eAAe,EAAE,MAAM,kBAAkB,CAAA;AAClE,OAAO,EAAE,UAAU,EAAE,MAAM,uBAAuB,CAAA;AAClD,OAAO,EAAE,QAAQ,EAAE,MAAM,UAAU,CAAA;AACnC,OAAO,EAAE,WAAW,EAAE,MAAM,0BAA0B,CAAA;AAEtD,OAAO,EAAE,UAAU,EAAE,MAAM,aAAa,CAAA;AACxC,OAAO,EAAE,QAAQ,EAAE,MAAM,QAAQ,CAAA;AACjC,OAAO,EAAE,oBAAoB,EAAE,uBAAuB,EAAE,MAAM,UAAU,CAAA;AAIxE,sDAAsD;AAEtD;;;;;;GAMG;AACH,MAAM,UAAU,eAAe,CAAC,MAA+B;IAC7D,IAAI,MAAM,CAAC,IAAI,KAAK,SAAS,EAAE,CAAC;QAC9B,MAAM,IAAI,KAAK,CACb,6EAA6E;YAC7E,0EAA0E,CAC3E,CAAA;IACH,CAAC;IACD,oBAAoB,CAAC,MAAM,CAAC,KAAK,EAAE,WAAW,CAAC,CAAA;IAC/C,oBAAoB,CAAC,MAAM,CAAC,KAAK,EAAE,WAAW,CAAC,CAAA;IAC/C,oBAAoB,CAAC,MAAM,CAAC,MAAM,EAAE,YAAY,CAAC,CAAA;AACnD,CAAC;AAED;;;GAGG;AACH,MAAM,UAAU,kBAAkB,CAAC,MAA+B;IAChE,oBAAoB,CAAC,MAAM,CAAC,MAAM,EAAE,eAAe,CAAC,CAAA;AACtD,CAAC;AAED;;;;;;GAMG;AACH,MAAM,UAAU,oBAAoB,CAAC,MAA+B;IAClE,IAAI,MAAM,CAAC,MAAM,KAAK,SAAS,IAAI,MAAM,CAAC,IAAI,KAAK,SAAS,EAAE,CAAC;QAC7D,MAAM,IAAI,KAAK,CACb,yEAAyE;YACzE,8EAA8E,CAC/E,CAAA;IACH,CAAC;IACD,oBAAoB,CAAC,MAAM,CAAC,MAAM,EAAE,iBAAiB,CAAC,CAAA;IACtD,oBAAoB,CAAC,MAAM,CAAC,MAAM,EAAE,iBAAiB,CAAC,CAAA;AACxD,CAAC;AAED;;;;;;;GAOG;AACH,MAAM,UAAU,gBAAgB,CAAC,MAA+B;IAC9D,IAAI,MAAM,CAAC,MAAM,KAAK,SAAS,IAAI,MAAM,CAAC,IAAI,KAAK,SAAS,EAAE,CAAC;QAC7D,MAAM,IAAI,KAAK,CACb,qEAAqE;YACrE,uFAAuF,CACxF,CAAA;IACH,CAAC;IACD,oBAAoB,CAAC,MAAM,CAAC,YAAY,EAAE,mBAAmB,CAAC,CAAA;IAC9D,uBAAuB,CAAC,MAAM,CAAC,SAAS,EAAE,gBAAgB,CAAC,CAAA;IAC3D,oBAAoB,CAAC,MAAM,CAAC,MAAM,EAAE,aAAa,CAAC,CAAA;AACpD,CAAC;AAED;;;;GAIG;AACH,MAAM,UAAU,iBAAiB,CAAC,MAA+B;IAC/D,oBAAoB,CAAC,MAAM,CAAC,KAAK,EAAE,aAAa,CAAC,CAAA;IACjD,oBAAoB,CAAC,MAAM,CAAC,MAAM,EAAE,cAAc,CAAC,CAAA;IACnD,oBAAoB,CAAC,MAAM,CAAC,KAAK,EAAE,aAAa,CAAC,CAAA;IACjD,oBAAoB,CAAC,MAAM,CAAC,MAAM,EAAE,cAAc,CAAC,CAAA;AACrD,CAAC;AAED,oEAAoE;AACpE,SAAS,aAAa,CAAC,EAAU,EAAE,MAA+B;IAChE,MAAM,MAAM,GAAG,UAAU,EAAE,CAAA;IAC3B,MAAM,IAAI,GAAG,EAAE,KAAK,KAAK,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,CAAA;IACvC,MAAM,MAAM,GAAG,oBAAoB,CAAC,MAAM,EAAE,IAAyD,EAAE,MAAe,CAAC,CAAA;IACvH,0DAA0D;IAC1D,gCAAgC;IAChC,2DAA2D;IAC3D,iDAAiD;IACjD,MAAM,MAAM,GAAG,MAAM,CAAC,cAAc,EAAE,EAAE,EAAE,IAAI,EAAE,CAAC,CAAA;IACjD,MAAM,KAAK,GAAG,WAAW,CAAC,MAAM,EAAE,MAAM,CAAC,KAAK,EAAE,EAAE,CAAC,CAAA;IACnD,+EAA+E;IAC/E,+EAA+E;IAC/E,MAAM,WAAW,GAAG,CAAC,MAAM,CAAC,IAAI,IAAI,MAAM,CAAC,QAAQ,CAAuB,CAAA;IAC1E,MAAM,QAAQ,GAAG,SAAS,CAAC,WAAW,IAAI,CAAC,CAAC,GAAG,IAAI,CAAC,EAAE,CAAC,GAAG,eAAe,EAAE,CAAC,iBAAiB,CAAC,CAAA;IAC9F,iDAAiD;IACjD,wDAAwD;IACxD,wDAAwD;IACxD,0DAA0D;IAC1D,kBAAkB;IAClB,MAAM,EAAE,KAAK,EAAE,UAAU,EAAE,GAAG,iBAAiB,CAAC,MAAM,EAAE,MAAM,CAAC,KAAK,EAAE,EAAE,EAAE,QAAQ,CAAC,CAAA;IACnF,IAAI,UAAU;QAAE,KAAK,CAAC,UAAU,GAAG,UAAU,CAAA;IAC7C,OAAO,QAAQ,CACb,KAAK,EACL,EAAE,KAAK,EAAE,MAAM,CAAC,KAAK,EAAE,SAAS,EAAE,IAAI,GAAG,CAAC,CAAC,CAAC,UAAU,CAAC,MAAM,CAAC,EAAE,KAAK,CAAC,CAAC,CAAC,EAAE,CAC3E,CAAA;AACH,CAAC;AAED,qDAAqD;AACrD,SAAS,cAAc,CACrB,IAAoB,EACpB,QAAgB,EAChB,QAAgB;IAEhB,IAAI,EAAE,GAAG,CAAC,CAAA;IACV,IAAI,EAAE,GAAG,CAAC,CAAA;IACV,IAAI,EAAE,GAAG,CAAC,CAAA;IACV,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,QAAQ,EAAE,CAAC,EAAE,EAAE,CAAC;QAClC,MAAM,EAAE,GAAG,IAAI,CAAC,OAAO,CAAC,CAAC,QAAQ,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,CAAA;QAC3C,MAAM,EAAE,GAAG,IAAI,CAAC,OAAO,CAAC,CAAC,QAAQ,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAA;QAC/C,MAAM,EAAE,GAAG,IAAI,CAAC,OAAO,CAAC,CAAC,QAAQ,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAA;QAC/C,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC;QAAC,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC;QAAC,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,CAAC,CAAA;QAClH,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC;QAAC,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC;QAAC,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,CAAC,CAAA;QAClH,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC;QAAC,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC;QAAC,MAAM,GAAG,GAAG,IAAI,CAAC,SAAS,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,CAAC,CAAA;QAClH,MAAM,EAAE,GAAG,GAAG,GAAG,GAAG,CAAC;QAAC,MAAM,EAAE,GAAG,GAAG,GAAG,GAAG,CAAC;QAAC,MAAM,EAAE,GAAG,GAAG,GAAG,GAAG,CAAA;QAChE,MAAM,EAAE,GAAG,GAAG,GAAG,GAAG,CAAC;QAAC,MAAM,EAAE,GAAG,GAAG,GAAG,GAAG,CAAC;QAAC,MAAM,EAAE,GAAG,GAAG,GAAG,GAAG,CAAA;QAChE,MAAM,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,CAAA;QAC5B,MAAM,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,CAAA;QAC5B,MAAM,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,CAAA;QAC5B,MAAM,GAAG,GAAG,IAAI,CAAC,KAAK,CAAC,EAAE,EAAE,EAAE,EAAE,EAAE,CAAC,CAAA;QAClC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,GAAG,CAAC,IAAI,GAAG,GAAG,KAAK;YAAE,SAAQ;QAClD,EAAE,IAAI,EAAE,CAAC;QAAC,EAAE,IAAI,EAAE,CAAC;QAAC,EAAE,IAAI,EAAE,CAAA;IAC9B,CAAC;IACD,MAAM,EAAE,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,CAAC;IAAC,MAAM,EAAE,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,CAAC;IAAC,MAAM,EAAE,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,CAAA;IACzE,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,EAAE,GAAG,EAAE,GAAG,EAAE,CAAC,IAAI,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,KAAK;QAAE,OAAO,IAAI,CAAA;IACvE,IAAI,EAAE,IAAI,EAAE,IAAI,EAAE,IAAI,EAAE;QAAE,OAAO,EAAE,IAAI,EAAE,CAAC,EAAE,IAAI,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAA;IACnE,IAAI,EAAE,IAAI,EAAE,IAAI,EAAE,IAAI,EAAE;QAAE,OAAO,EAAE,IAAI,EAAE,CAAC,EAAE,IAAI,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAA;IACnE,OAAO,EAAE,IAAI,EAAE,CAAC,EAAE,IAAI,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAA;AAC3C,CAAC;AAED;;;;;;;GAOG;AACH,SAAS,iBAAiB,CACxB,MAAqB,EACrB,KAAiB,EACjB,EAAU,EACV,QAAgB;IAEhB,MAAM,iBAAiB,GAAG,CAAC,CAAC,GAAG,IAAI,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,QAAQ,CAAC,CAAA;IAC/D,MAAM,IAAI,GAAG,MAAM,CAAC,SAAS,CAAC,KAAK,EAAE;QACnC,gBAAgB,EAAE,eAAe,EAAE,CAAC,gBAAgB;QACpD,iBAAiB;KAClB,CAAC,CAAA;IACF,MAAM,KAAK,GAAU;QACnB,SAAS,EAAE,IAAI,YAAY,CAAC,IAAI,CAAC,SAAS,CAAC;QAC3C,OAAO,EAAE,IAAI,WAAW,CAAC,IAAI,CAAC,OAAO,CAAC;KACvC,CAAA;IACD,MAAM,EAAE,GAAG,IAAI,CAAC,UAAU,CAAA;IAC1B,IAAI,CAAC,EAAE;QAAE,OAAO,EAAE,KAAK,EAAE,CAAA;IACzB,MAAM,KAAK,GAAkD,EAAE,CAAA;IAC/D,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,EAAE,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC;QACvC,KAAK,CAAC,IAAI,CAAC,EAAE,QAAQ,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,EAAE,QAAQ,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,CAAA;IACtE,CAAC;IACD,IAAI,EAAE,KAAK,KAAK,IAAI,KAAK,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;QACvC,qDAAqD;QACrD,MAAM,UAAU,GAA8C,IAAI,KAAK,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,SAAS,CAAC,CAAA;QAC1F,KAAK,MAAM,CAAC,IAAI,KAAK,EAAE,CAAC;YACtB,MAAM,EAAE,GAAG,cAAc,CAAC,IAAI,EAAE,CAAC,CAAC,QAAQ,EAAE,CAAC,CAAC,QAAQ,CAAC,CAAA;YACvD,IAAI,CAAC,EAAE;gBAAE,OAAO,EAAE,KAAK,EAAE,CAAA;YACzB,MAAM,GAAG,GAAG,EAAE,CAAC,IAAI,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,IAAI,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,IAAI,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,IAAI,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,IAAI,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAA;YACjH,IAAI,UAAU,CAAC,GAAG,CAAC,KAAK,SAAS;gBAAE,OAAO,EAAE,KAAK,EAAE,CAAA,CAAC,cAAc;YAClE,UAAU,CAAC,GAAG,CAAC,GAAG,CAAC,CAAA;QACrB,CAAC;QACD,IAAI,UAAU,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,KAAK,SAAS,CAAC;YAAE,OAAO,EAAE,KAAK,EAAE,CAAA;QAC7D,MAAM,UAAU,GAAG,IAAI,WAAW,CAAC,IAAI,CAAC,OAAO,CAAC,MAAM,CAAC,CAAA;QACvD,MAAM,UAAU,GAAqC,EAAE,CAAA;QACvD,IAAI,MAAM,GAAG,CAAC,CAAA;QACd,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC;YAC3B,MAAM,CAAC,GAAG,UAAU,CAAC,CAAC,CAAE,CAAA;YACxB,UAAU,CAAC,IAAI,CAAC,EAAE,KAAK,EAAE,MAAM,EAAE,KAAK,EAAE,CAAC,CAAC,QAAQ,EAAE,CAAC,CAAA;YACrD,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,CAAC,CAAC,QAAQ,EAAE,CAAC,EAAE,EAAE,CAAC;gBACpC,UAAU,CAAC,CAAC,MAAM,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,IAAI,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,QAAQ,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,CAAA;gBACjE,UAAU,CAAC,CAAC,MAAM,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,GAAG,IAAI,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,QAAQ,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAA;gBACzE,UAAU,CAAC,CAAC,MAAM,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,GAAG,IAAI,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,QAAQ,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAA;YAC3E,CAAC;YACD,MAAM,IAAI,CAAC,CAAC,QAAQ,CAAA;QACtB,CAAC;QACD,OAAO,EAAE,KAAK,EAAE,EAAE,GAAG,KAAK,EAAE,OAAO,EAAE,UAAU,EAAE,EAAE,UAAU,EAAE,CAAA;IACjE,CAAC;IACD,IAAI,CAAC,EAAE,KAAK,UAAU,IAAI,EAAE,KAAK,MAAM,CAAC,IAAI,KAAK,CAAC,MAAM,IAAI,CAAC,EAAE,CAAC;QAC9D,8DAA8D;QAC9D,OAAO,EAAE,KAAK,EAAE,UAAU,EAAE,KAAK,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,EAAE,KAAK,EAAE,CAAC,CAAC,QAAQ,EAAE,KAAK,EAAE,CAAC,CAAC,QAAQ,EAAE,CAAC,CAAC,EAAE,CAAA;IAC5F,CAAC;IACD,OAAO,EAAE,KAAK,EAAE,CAAA;AAClB,CAAC;AAED;;;;;;;;;;;;;;;;;;;;;;KAsBK;AACL,MAAM,CAAC,MAAM,GAAG,GAAG,QAAQ,CAAC;IAC1B,IAAI,EAAE,KAAK;IACX,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,eAAe,CAAC,MAAM,CAAC,CAAA;QACvB,OAAO,cAAc,CAAC,GAAG,CAAC,MAAe,CAAC,CAAA;IAC5C,CAAC;IACD,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,eAAe,CAAC,MAAM,CAAC,CAAA;QACvB,OAAO,aAAa,CAAC,KAAK,EAAE,MAAM,CAAC,CAAA;IACrC,CAAC;IACD,4CAA4C;IAC5C,MAAM,EAAE;QACN,KAAK,EAAE,QAAQ;QACf,KAAK,EAAE,QAAQ;QACf,MAAM,EAAE,QAAQ;QAChB,EAAE,EAAE,OAAO;QACX,QAAQ,EAAE,UAAU;QACpB,QAAQ,EAAE,SAAS;KACpB;IACD,2DAA2D;IAC3D,0CAA0C;IAC1C,OAAO,EAAE,EAAE,IAAI,EAAE,CAAC,OAAO,EAAE,OAAO,EAAE,QAAQ,CAAC,EAAE;IAC/C,SAAS,EAAE,EAAE,KAAK,EAAE,QAAQ,EAAE,KAAK,EAAE,QAAQ,EAAE,MAAM,EAAE,QAAQ,EAAE;IACjE,MAAM,EAAE,EAAE,IAAI,EAAE,WAAW,EAAE,QAAQ,EAAE,EAAE,GAAG,EAAE,UAAU,EAAE,KAAK,EAAE,CAAC,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,KAAK,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,QAAQ,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,OAAO,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,MAAM,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,MAAM,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,OAAO,EAAE,CAAC,EAAE,EAAgB;CAC/S,CAAC,CAAA;AAEF;;;;;;;;;;;;;;;;GAgBG;AACH,MAAM,CAAC,MAAM,MAAM,GAAG,QAAQ,CAAC;IAC7B,IAAI,EAAE,QAAQ;IACd,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,kBAAkB,CAAC,MAAM,CAAC,CAAA;QAC1B,OAAO,cAAc,CAAC,MAAM,CAAC,YAAY,CAAC,MAAM,CAAU,CAAC,CAAA;IAC7D,CAAC;IACD,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,kBAAkB,CAAC,MAAM,CAAC,CAAA;QAC1B,OAAO,aAAa,CAAC,QAAQ,EAAE,YAAY,CAAC,MAAM,CAAC,CAAC,CAAA;IACtD,CAAC;IACD,MAAM,EAAE,EAAE,MAAM,EAAE,QAAQ,EAAE,QAAQ,EAAE,SAAS,EAAE,MAAM,EAAE,OAAO,EAAE,EAAE,EAAE,OAAO,EAAE;IAC/E,4EAA4E;IAC5E,yCAAyC;IACzC,OAAO,EAAE,EAAE,IAAI,EAAE,CAAC,QAAQ,CAAC,EAAE;IAC7B,SAAS,EAAE,EAAE,MAAM,EAAE,QAAQ,EAAE;IAC/B,MAAM,EAAE,EAAE,IAAI,EAAE,WAAW,EAAE,MAAM,EAAE,wCAAwC,EAAgB;CAC9F,CAAC,CAAA;AAEF;;;GAGG;AACH,SAAS,YAAY,CAAC,MAA+B;IACnD,IAAI,MAAM,CAAC,EAAE,KAAK,SAAS;QAAE,OAAO,EAAE,GAAG,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,EAAE,EAAE,CAAA;IACpE,OAAO,MAAM,CAAA;AACf,CAAC;AAED;;;;;;;;;;;;;;;;;;;;;;IAsBI;AACJ,MAAM,CAAC,MAAM,QAAQ,GAAG,QAAQ,CAAC;IAC/B,IAAI,EAAE,UAAU;IAChB,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,oBAAoB,CAAC,MAAM,CAAC,CAAA;QAC5B,OAAO,cAAc,CAAC,QAAQ,CAAC,MAAe,CAAC,CAAA;IACjD,CAAC;IACD,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,oBAAoB,CAAC,MAAM,CAAC,CAAA;QAC5B,OAAO,aAAa,CAAC,UAAU,EAAE,MAAM,CAAC,CAAA;IAC1C,CAAC;IACD,MAAM,EAAE,EAAE,MAAM,EAAE,QAAQ,EAAE,MAAM,EAAE,QAAQ,EAAE,EAAE,EAAE,OAAO,EAAE,QAAQ,EAAE,UAAU,EAAE,QAAQ,EAAE,SAAS,EAAE;IACtG,yEAAyE;IACzE,2BAA2B;IAC3B,OAAO,EAAE,EAAE,IAAI,EAAE,CAAC,QAAQ,EAAE,QAAQ,CAAC,EAAE;IACvC,SAAS,EAAE,EAAE,MAAM,EAAE,QAAQ,EAAE,MAAM,EAAE,QAAQ,EAAE;IACjD,MAAM,EAAE,EAAE,IAAI,EAAE,WAAW,EAAE,QAAQ,EAAE,EAAE,GAAG,EAAE,UAAU,EAAE,KAAK,EAAE,CAAC,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,KAAK,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,QAAQ,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,SAAS,EAAE,CAAC,EAAE,EAAgB;CACpM,CAAC,CAAA;AAEF;;;;;;;;;;;;;;;;;;;;;;IAsBI;AACJ,MAAM,CAAC,MAAM,IAAI,GAAG,QAAQ,CAAC;IAC3B,IAAI,EAAE,MAAM;IACZ,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,gBAAgB,CAAC,MAAM,CAAC,CAAA;QACxB,OAAO,cAAc,CAAC,IAAI,CAAC,MAAe,CAAC,CAAA;IAC7C,CAAC;IACD,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,gBAAgB,CAAC,MAAM,CAAC,CAAA;QACxB,OAAO,aAAa,CAAC,MAAM,EAAE,MAAM,CAAC,CAAA;IACtC,CAAC;IACD,MAAM,EAAE;QACN,YAAY,EAAE,QAAQ;QACtB,SAAS,EAAE,QAAQ;QACnB,MAAM,EAAE,QAAQ;QAChB,EAAE,EAAE,OAAO;QACX,QAAQ,EAAE,UAAU;QACpB,QAAQ,EAAE,SAAS;KACpB;IACD,iFAAiF;IACjF,+DAA+D;IAC/D,OAAO,EAAE,EAAE,IAAI,EAAE,CAAC,cAAc,EAAE,WAAW,EAAE,QAAQ,CAAC,EAAE;IAC1D,SAAS,EAAE,EAAE,YAAY,EAAE,QAAQ,EAAE,SAAS,EAAE,QAAQ,EAAE,MAAM,EAAE,QAAQ,EAAE;IAC5E,MAAM,EAAE,EAAE,IAAI,EAAE,WAAW,EAAE,QAAQ,EAAE,EAAE,GAAG,EAAE,UAAU,EAAE,KAAK,EAAE,CAAC,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,KAAK,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,QAAQ,EAAE,EAAE,EAAE,IAAI,EAAE,UAAU,EAAE,IAAI,EAAE,SAAS,EAAE,CAAC,EAAE,EAAgB;CACpM,CAAC,CAAA;AAEF;;;;;;;;;;;;;;;;IAgBI;AACJ,MAAM,CAAC,MAAM,KAAK,GAAG,QAAQ,CAAC;IAC5B,IAAI,EAAE,OAAO;IACb,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,iBAAiB,CAAC,MAAM,CAAC,CAAA;QACzB,OAAO,cAAc,CAAC,KAAK,CAAC,MAAe,CAAC,CAAA;IAC9C,CAAC;IACD,IAAI,EAAE,CAAC,MAA+B,EAAE,EAAE;QACxC,iBAAiB,CAAC,MAAM,CAAC,CAAA;QACzB,OAAO,aAAa,CAAC,OAAO,EAAE,MAAM,CAAC,CAAA;IACvC,CAAC;IACD,6FAA6F;IAC7F,OAAO,EAAE,EAAE,IAAI,EAAE,CAAC,OAAO,EAAE,QAAQ,EAAE,OAAO,EAAE,QAAQ,CAAC,EAAE;IACzD,SAAS,EAAE,EAAE,KAAK,EAAE,QAAQ,EAAE,MAAM,EAAE,QAAQ,EAAE,KAAK,EAAE,OAAO,EAAE,MAAM,EAAE,QAAQ,EAAE;IAClF,MAAM,EAAE,EAAE,IAAI,EAAE,WAAW,EAAE,MAAM,EAAE,uCAAuC,EAAgB;CAC7F,CAAC,CAAA","sourcesContent":["/**\n * api primitives — 基本体创建库函数（box/sphere/cylinder/cone/wedge）\n *\n *\n * dispatchPath 静态判定 brep/mesh，产物经 solid()/fromBrep() 构造器创建。\n */\n\nimport type { Shape } from '../mesh/types'\nimport { clampNRad } from '../mesh/types'\n// B3 correction (2026-10-06): no library-face cad aggregate — import the impl from its own module.\nimport * as meshPrimitives from '../mesh/primitives'\nimport { primitiveToBrepSolid } from '../primitives/brep-primitives'\nimport { getCurrentStmt, getTessellation } from '../runtime-state'\nimport { getBrepApi } from '../brep/handle-bridge'\nimport { fromBrep } from '../shape'\nimport { assignRoles } from '../topology/naming/roles'\nimport type { Provenance } from '../topology/naming/lineage'\nimport { asPartName } from '../identity'\nimport { defineOp } from '../sdk'\nimport { assertPositiveNumber, assertNonNegativeNumber } from './assert'\nimport type { BrepMeshResult, BrepHandle } from '../brep/engine/types'\nimport type { BrepEngineApi } from '../brep/engine/primitives'\n\n// ── per-op 参数自校验（Phase 2.2；api 层被直接 import 时的防御层） ──\n\n/**\n * Validate box parameters (brepjs contract, §4.1 A 决策): `width`, `depth` and\n * `height` must be positive numbers. The legacy `{ size }` object form is\n * removed — any call still passing `size` throws an explicit `E_ARGS_FORM`\n * error pointing at the new signature (error hint ≠ compatibility).\n * @param params - the raw box operation parameters.\n */\nexport function assertBoxParams(params: Record<string, unknown>): void {\n  if (params.size !== undefined) {\n    throw new Error(\n      '[faijs/args] box: E_ARGS_FORM: the `box({ size })` object form is removed. ' +\n      'box now uses `box(width, depth, height, { at?, centered?, segments? })`.',\n    )\n  }\n  assertPositiveNumber(params.width, 'box.width')\n  assertPositiveNumber(params.depth, 'box.depth')\n  assertPositiveNumber(params.height, 'box.height')\n}\n\n/**\n * Validate sphere parameters: `radius` must be a positive number.\n * @param params - the raw sphere operation parameters.\n */\nexport function assertSphereParams(params: Record<string, unknown>): void {\n  assertPositiveNumber(params.radius, 'sphere.radius')\n}\n\n/**\n * Validate cylinder parameters (brepjs contract, §4.3 A 决策): `radius` and\n * `height` must be positive. The legacy `{ center }` object key is removed — any\n * call still passing `center` throws an explicit `E_ARGS_FORM` error pointing at\n * the new signature (error hint ≠ compatibility, 裁决 3).\n * @param params - the raw cylinder operation parameters.\n */\nexport function assertCylinderParams(params: Record<string, unknown>): void {\n  if (params.center !== undefined || params.size !== undefined) {\n    throw new Error(\n      '[faijs/args] cylinder: E_ARGS_FORM: the legacy object form is removed. ' +\n      'cylinder now uses `cylinder(radius, height, { at?, centered?, segments? })`.',\n    )\n  }\n  assertPositiveNumber(params.radius, 'cylinder.radius')\n  assertPositiveNumber(params.height, 'cylinder.height')\n}\n\n/**\n * Validate cone parameters (brepjs contract, §4.1 P 决策): `radiusBottom` and\n * `height` must be positive, `radiusTop` must be non-negative. The legacy\n * `{ center }` object key is removed — any call still passing `center` throws an\n * explicit `E_ARGS_FORM` error pointing at the new signature (error hint ≠\n * compatibility, 裁决 3).\n * @param params - the raw cone operation parameters.\n */\nexport function assertConeParams(params: Record<string, unknown>): void {\n  if (params.center !== undefined || params.size !== undefined) {\n    throw new Error(\n      '[faijs/args] cone: E_ARGS_FORM: the legacy object form is removed. ' +\n      'cone now uses `cone(bottomRadius, topRadius, height, { at?, centered?, segments? })`.',\n    )\n  }\n  assertPositiveNumber(params.radiusBottom, 'cone.radiusBottom')\n  assertNonNegativeNumber(params.radiusTop, 'cone.radiusTop')\n  assertPositiveNumber(params.height, 'cone.height')\n}\n\n/**\n * Validate wedge parameters: `width`, `height`, `angle`, and `length` must be\n * positive numbers.\n * @param params - the raw wedge operation parameters.\n */\nexport function assertWedgeParams(params: Record<string, unknown>): void {\n  assertPositiveNumber(params.width, 'wedge.width')\n  assertPositiveNumber(params.height, 'wedge.height')\n  assertPositiveNumber(params.angle, 'wedge.angle')\n  assertPositiveNumber(params.length, 'wedge.length')\n}\n\n/** BREP 路径：OCCT 精确构造 + 三角化 + fromBrep 登记（基本体无面演化；链根建 roleTable）。 */\nfunction primitiveBrep(op: string, params: Record<string, unknown>): Shape {\n  const kernel = getBrepApi()\n  const type = op === 'box' ? 'cube' : op\n  const result = primitiveToBrepSolid(kernel, type as 'cube' | 'sphere' | 'cylinder' | 'cone' | 'wedge', params as never)\n  // §3.2：链根建表——语义命名器按 op 类型给面命名（semantic 'top'/'lateral' 等，\n  // Phase 1.7 已删 'box:' 前缀与位置兜底）。\n  // Phase 1.6：origin 用链根语句的 StmtId（当前语句 id，§2.2/§4.1）——变量名会被\n  // 改名/复用，StmtId 全局唯一，保证多个同类型 primitive 不撞 origin。\n  const origin = String(getCurrentStmt()?.id ?? op)\n  const roles = assignRoles(kernel, result.solid, op)\n  // Explicit segments/nRad wins ($fn override); otherwise derive from the global\n  // tessellation knob (proposal 2026-10-07) — default still 2π/64 ≈ 64 segments.\n  const rawSegments = (params.nRad ?? params.segments) as number | undefined\n  const segments = clampNRad(rawSegments ?? (2 * Math.PI) / getTessellation().angularDeflection)\n  // P4 面级：brep 链基本体也挂契约序 faceRanges（编辑器默认 brep 链——\n  // setFaceColor 必须可用）。box 的 OCCT 面枚举序（实测 0=−X,1=+Y,…）与契约\n  // （+X/−X/+Y/−Y/+Z/−Z）不一致，按面法线重排 indices；cylinder/cone 的\n  // OCCT 序与契约一致（实测锁定：cylinder 0=侧面,1=顶,2=底；cone radiusTop=0\n  // 0=侧面,1=底），直接透传。\n  const { shape, faceRanges } = brepPrimitiveMesh(kernel, result.solid, op, segments)\n  if (faceRanges) shape.faceRanges = faceRanges\n  return fromBrep(\n    shape,\n    { solid: result.solid, roleTable: new Map([[asPartName(origin), roles]]) },\n  )\n}\n\n/** 面法线主轴向：用该面非退化三角形的法线和定轴与符号（OCCT 统一 outward 绕向）。 */\nfunction faceNormalAxis(\n  mesh: BrepMeshResult,\n  triStart: number,\n  triCount: number,\n): { axis: 0 | 1 | 2; sign: 1 | -1 } | null {\n  let sx = 0\n  let sy = 0\n  let sz = 0\n  for (let t = 0; t < triCount; t++) {\n    const i0 = mesh.indices[(triStart + t) * 3]\n    const i1 = mesh.indices[(triStart + t) * 3 + 1]\n    const i2 = mesh.indices[(triStart + t) * 3 + 2]\n    const p0x = mesh.positions[i0 * 3]; const p0y = mesh.positions[i0 * 3 + 1]; const p0z = mesh.positions[i0 * 3 + 2]\n    const p1x = mesh.positions[i1 * 3]; const p1y = mesh.positions[i1 * 3 + 1]; const p1z = mesh.positions[i1 * 3 + 2]\n    const p2x = mesh.positions[i2 * 3]; const p2y = mesh.positions[i2 * 3 + 1]; const p2z = mesh.positions[i2 * 3 + 2]\n    const ux = p1x - p0x; const uy = p1y - p0y; const uz = p1z - p0z\n    const vx = p2x - p0x; const vy = p2y - p0y; const vz = p2z - p0z\n    const nx = uy * vz - uz * vy\n    const ny = uz * vx - ux * vz\n    const nz = ux * vy - uy * vx\n    const len = Math.hypot(nx, ny, nz)\n    if (!Number.isFinite(len) || len < 1e-12) continue\n    sx += nx; sy += ny; sz += nz\n  }\n  const ax = Math.abs(sx); const ay = Math.abs(sy); const az = Math.abs(sz)\n  if (!Number.isFinite(ax + ay + az) || ax + ay + az < 1e-12) return null\n  if (ax >= ay && ax >= az) return { axis: 0, sign: sx > 0 ? 1 : -1 }\n  if (ay >= ax && ay >= az) return { axis: 1, sign: sy > 0 ? 1 : -1 }\n  return { axis: 2, sign: sz > 0 ? 1 : -1 }\n}\n\n/**\n * 三角化基本体并附 P4 契约序 faceRanges。\n * faceGroups 三元组 = [triStart, triCount, faceHash]，前两元是索引单位\n * （brep-ops.ts 注释）→ 三角形单位 = 索引/3。\n * - box：6 面 → 按面法线重排 indices 到契约序（0=+X,1=−X,2=+Y,3=−Y,4=+Z,5=−Z）。\n * - cylinder/cone：OCCT 枚举序与契约一致（探针实测锁定），直接透传，不重排。\n * - wedge/sphere 及其它：无契约，不挂 faceRanges（setFaceColor 抛 E_FACE_UNAVAILABLE）。\n */\nfunction brepPrimitiveMesh(\n  kernel: BrepEngineApi,\n  solid: BrepHandle,\n  op: string,\n  segments: number,\n): { shape: Shape; faceRanges?: Shape['faceRanges'] } {\n  const angularDeflection = (2 * Math.PI) / Math.max(3, segments)\n  const mesh = kernel.meshShape(solid, {\n    linearDeflection: getTessellation().linearDeflection,\n    angularDeflection,\n  })\n  const shape: Shape = {\n    positions: new Float32Array(mesh.positions),\n    indices: new Uint32Array(mesh.indices),\n  }\n  const fg = mesh.faceGroups\n  if (!fg) return { shape }\n  const faces: Array<{ triStart: number; triCount: number }> = []\n  for (let f = 0; f < fg.length / 3; f++) {\n    faces.push({ triStart: fg[f * 3] / 3, triCount: fg[f * 3 + 1] / 3 })\n  }\n  if (op === 'box' && faces.length === 6) {\n    // 契约序重排：每面判向 → 契约 idx（+X=0,−X=1,+Y=2,−Y=3,+Z=4,−Z=5）\n    const byContract: Array<(typeof faces)[number] | undefined> = new Array(6).fill(undefined)\n    for (const f of faces) {\n      const na = faceNormalAxis(mesh, f.triStart, f.triCount)\n      if (!na) return { shape }\n      const idx = na.axis === 0 ? (na.sign > 0 ? 0 : 1) : na.axis === 1 ? (na.sign > 0 ? 2 : 3) : (na.sign > 0 ? 4 : 5)\n      if (byContract[idx] !== undefined) return { shape } // 法线判向歧义 → 不挂\n      byContract[idx] = f\n    }\n    if (byContract.some((f) => f === undefined)) return { shape }\n    const newIndices = new Uint32Array(mesh.indices.length)\n    const faceRanges: NonNullable<Shape['faceRanges']> = []\n    let outTri = 0\n    for (let c = 0; c < 6; c++) {\n      const f = byContract[c]!\n      faceRanges.push({ start: outTri, count: f.triCount })\n      for (let t = 0; t < f.triCount; t++) {\n        newIndices[(outTri + t) * 3] = mesh.indices[(f.triStart + t) * 3]\n        newIndices[(outTri + t) * 3 + 1] = mesh.indices[(f.triStart + t) * 3 + 1]\n        newIndices[(outTri + t) * 3 + 2] = mesh.indices[(f.triStart + t) * 3 + 2]\n      }\n      outTri += f.triCount\n    }\n    return { shape: { ...shape, indices: newIndices }, faceRanges }\n  }\n  if ((op === 'cylinder' || op === 'cone') && faces.length >= 2) {\n    // OCCT 枚举序 = P4a 契约序（探针实测）：0=侧面, 1=顶, 2=底（cone 无顶盖时 0=侧面,1=底）\n    return { shape, faceRanges: faces.map((f) => ({ start: f.triStart, count: f.triCount })) }\n  }\n  return { shape }\n}\n\n/**\n * 创建长方体（brepjs 契约，§4.1 A 决策）。\n * @group 创建\n * @inputs 0\n * @async false\n * @qual ok\n * @name box\n * @returns Shape 长方体几何，可作为后续 op 的输入。\n * @param params.width - X 方向边长（mm）。type:number required:true\n * @param params.depth - Y 方向边长（mm）。type:number required:true\n * @param params.height - Z 方向边长（mm）。type:number required:true\n * @param params.at - 中心点（CENTER 语义，优先于 centered）。type:[x,y,z] 可选\n * @param params.centered - 无 at 时是否居中到原点（type:boolean 默认 false，角点在原点）。\n * @param params.segments - 细分度（影响三角化）。type:number 默认 64（= brepjs standard 等效，P0 §5.0/§5.1）\n * @example\n * const part0 = cad.box(10 * MM, 20 * MM, 30 * MM)\n * const part1 = cad.box(30 * MM, 20 * MM, 10 * MM, { at: [1, 2, 3], segments: 64 })\n *\n * 位置原生（§4.1/§6.2）：`box(width, depth, height)` 与 `box(10 * MM, 20 * MM, 30 * MM, { at: [1, 2, 3] })`\n * 有量纲位必须写单位字面量（基准单位亦然，`10` 裸数字被 D8 R2 拒）。\n * 归一到同一对象（D11 位置→对象 + 尾参 options 合并）。旧 `{ size }` 对象形态已废弃（裁决 3），\n * 传入会抛 `E_ARGS_FORM`（错误提示 ≠ 兼容，§4.1）。\n   */\nexport const box = defineOp({\n  name: 'box',\n  mesh: (params: Record<string, unknown>) => {\n    assertBoxParams(params)\n    return meshPrimitives.box(params as never)\n  },\n  brep: (params: Record<string, unknown>) => {\n    assertBoxParams(params)\n    return primitiveBrep('box', params)\n  },\n  // schema feeds codegen/UI parameter panels.\n  schema: {\n    width: 'number',\n    depth: 'number',\n    height: 'number',\n    at: 'vec3?',\n    centered: 'boolean?',\n    segments: 'number?',\n  },\n  // D11 位置→对象（§4.1/§6.2）：三个标量装箱成 { width, depth, height }，尾参\n  // options 经 dual-form-args 的尾参合并（§6.2）并入。\n  slotMap: { keys: ['width', 'depth', 'height'] },\n  paramDims: { width: 'length', depth: 'length', height: 'length' },\n  naming: { kind: 'construct', newFaces: { via: 'explicit', vocab: [{ kind: 'semantic', name: 'top' }, { kind: 'semantic', name: 'bottom' }, { kind: 'semantic', name: 'front' }, { kind: 'semantic', name: 'back' }, { kind: 'semantic', name: 'left' }, { kind: 'semantic', name: 'right' }] } } as Provenance,\n})\n\n/**\n * 创建球体。\n * @group 创建\n * @inputs 0\n * @async false\n * @qual ok\n * @name sphere\n * @returns Shape 球体几何，可作为后续 op 的输入。\n * @param params.radius - 半径（mm）。type:number required:true\n * @param params.segments - 细分度（影响面数）。type:number 默认 64（= brepjs standard 等效，P0 §5.0/§5.1）\n * @param params.center - 球心位置（at 的同义别名）。type:[x,y,z] 默认 [0,0,0]（原点）。\n * @param params.at - 球心位置（center 的同义别名，brepjs 契约；裁决 4 双形态合法）。\n * @example\n * const r = cad.sphere({ radius: 10 })\n * const r = cad.sphere(10, { at: [0, 0, 10], segments: 64 })\n * const r = cad.sphere({ radius: 10, segments: 64, center: [0,0,10] })\n */\nexport const sphere = defineOp({\n  name: 'sphere',\n  mesh: (params: Record<string, unknown>) => {\n    assertSphereParams(params)\n    return meshPrimitives.sphere(centerParams(params) as never)\n  },\n  brep: (params: Record<string, unknown>) => {\n    assertSphereParams(params)\n    return primitiveBrep('sphere', centerParams(params))\n  },\n  schema: { radius: 'number', segments: 'number?', center: 'vec3?', at: 'vec3?' },\n  // D11: `sphere(10)` == `sphere({ radius: 10 })`; 尾参 options（{at, segments}）\n  // 经 dual-form-args 的尾参合并规则归一（裁决 4，§6.2）。\n  slotMap: { keys: ['radius'] },\n  paramDims: { radius: 'length' },\n  naming: { kind: 'unmodeled', reason: 'sphere face vocabulary pending Phase 3' } as Provenance,\n})\n\n/**\n * 位置归一：把 brepjs 契约的 `at`（= faijs 的 `center`，球心语义）归一为一个\n * `center` 输入，mesh/brep 两条消费路径共用（裁决 1/4，§4.2）。\n */\nfunction centerParams(params: Record<string, unknown>): Record<string, unknown> {\n  if (params.at !== undefined) return { ...params, center: params.at }\n  return params\n}\n\n/**\n * 创建圆柱体（brepjs 契约，§4.3 A 决策）。\n * 锚点：`at` 是**底面轴心**（BASE 语义，默认 [0,0,0]，底面在原点、+Z 延伸）；`centered:true`\n * 指底面落到 −h/2（无 at 时居中到原点；与 `at` 同给时以 `at` 为中心）。\n * @group 创建\n * @inputs 0\n * @async false\n * @qual ok\n * @name cylinder\n * @returns Shape 圆柱体几何，可作为后续 op 的输入。\n * @param params.radius - 底面半径（mm）。type:number required:true\n * @param params.height - 高度（mm），沿 +Z 轴。type:number required:true\n * @param params.at - 底面中心（BASE 语义）。type:[x,y,z] 可选\n * @param params.centered - 是否居中（底面 −h/2；与 at 同给时以 at 为中心）。type:boolean 默认 false\n * @param params.segments - 细分度（影响三角化）。type:number 默认 64（= brepjs standard 等效，P0 §5.0/§5.1）\n * @example\n * const c = cad.cylinder(5, 40)\n * const c = cad.cylinder(5, 40, { at: [0, 0, 20], segments: 64 })\n *\n * 位置原生（§4.1/§6.2）：`cylinder(5, 40)` 与 `cylinder(5, 40, { at: [0, 0, 20] })`\n * 归一到同一对象（D11 位置→装箱 + 尾参 options 合并）。旧 `{ center }` 对象形态已废弃\n * （裁决 3），传入会抛 `E_ARGS_FORM`（错误提示 ≠ 兼容，§4.3）。\n  */\nexport const cylinder = defineOp({\n  name: 'cylinder',\n  mesh: (params: Record<string, unknown>) => {\n    assertCylinderParams(params)\n    return meshPrimitives.cylinder(params as never)\n  },\n  brep: (params: Record<string, unknown>) => {\n    assertCylinderParams(params)\n    return primitiveBrep('cylinder', params)\n  },\n  schema: { radius: 'number', height: 'number', at: 'vec3?', centered: 'boolean?', segments: 'number?' },\n  // D11（§4.1/§6.2）：`cylinder(5, 40)` 两个标量装箱成 { radius, height }；尾参 options\n  // 经 dual-form-args 尾参合并并入。\n  slotMap: { keys: ['radius', 'height'] },\n  paramDims: { radius: 'length', height: 'length' },\n  naming: { kind: 'construct', newFaces: { via: 'explicit', vocab: [{ kind: 'semantic', name: 'top' }, { kind: 'semantic', name: 'bottom' }, { kind: 'semantic', name: 'lateral' }] } } as Provenance,\n})\n\n/**\n * 创建圆锥体（brepjs 契约，§4.1 P 决策）。radiusTop 等于 radiusBottom 时即圆柱，0 为尖锥。\n * 锚点：`at` 是**底面轴心**（BASE 语义，默认 [0,0,0]，底面在原点、+Z 延伸）；`centered:true`\n * 指底面落到 −h/2（无 at 时居中到原点；与 `at` 同给时以 `at` 为中心）。\n * @group 创建\n * @inputs 0\n * @async false\n * @qual ok\n * @name cone\n * @returns Shape 圆锥体几何，可作为后续 op 的输入。\n * @param params.radiusBottom - 底半径（mm）。type:number required:true\n * @param params.radiusTop - 顶半径（mm），0 为尖锥，非负，等于 radiusBottom 得圆柱。type:number required:true\n * @param params.height - 高度（mm），沿 +Z 轴。type:number required:true\n * @param params.at - 底面轴心（BASE 语义）。type:[x,y,z] 可选\n * @param params.centered - 是否居中（底面 −h/2；与 at 同给时以 at 为中心）。type:boolean 默认 false\n * @param params.segments - 细分度（影响三角化）。type:number 默认 64（= brepjs standard 等效，P0 §5.0/§5.1）\n * @example\n * const c = cad.cone(10, 4, 30)\n * const c = cad.cone(10, 0, 30, { at: [0, 0, 20], segments: 64 })\n * 位置原生（§4.1/§6.2）：`cone(10, 4, 30)` 与 `cone(10, 4, 30, { at: [0, 0, 20] })`\n * 归一到同一对象（D11 位置→装箱 + 尾参 options 合并）。旧 `{ center }`/`{ size }` 对象形态\n * 已废弃（裁决 3），传入会抛 E_ARGS_FORM（错误提示 ≠ 兼容）。\n  */\nexport const cone = defineOp({\n  name: 'cone',\n  mesh: (params: Record<string, unknown>) => {\n    assertConeParams(params)\n    return meshPrimitives.cone(params as never)\n  },\n  brep: (params: Record<string, unknown>) => {\n    assertConeParams(params)\n    return primitiveBrep('cone', params)\n  },\n  schema: {\n    radiusBottom: 'number',\n    radiusTop: 'number',\n    height: 'number',\n    at: 'vec3?',\n    centered: 'boolean?',\n    segments: 'number?',\n  },\n  // D11（§4.1/§6.2）: `cone(10, 4, 30)` 三个标量装箱成 { radiusBottom, radiusTop, height }。\n  // 尾参 options（{at, centered, segments}）经 dual-form-args 尾参合并并入。\n  slotMap: { keys: ['radiusBottom', 'radiusTop', 'height'] },\n  paramDims: { radiusBottom: 'length', radiusTop: 'length', height: 'length' },\n  naming: { kind: 'construct', newFaces: { via: 'explicit', vocab: [{ kind: 'semantic', name: 'top' }, { kind: 'semantic', name: 'bottom' }, { kind: 'semantic', name: 'lateral' }] } } as Provenance,\n})\n\n/**\n * 创建楔形体。唯一契约是 width/height/angle/length（width/height/angle 为正数，length 沿切割方向），\n * 旧文档的 size 形态已废弃，传 { size } 会抛错。\n * @group 创建\n * @inputs 0\n * @async false\n * @qual ok\n * @name wedge\n * @note 曾与 UI 面板的 `size` 形态并存并写入文档，但断言层确认唯一合法契约是 width/height/angle/length；传 `{ size }` 直接抛错。已按真源收敛。\n * @returns Shape 楔形体几何，可作为后续 op 的输入。\n * @param params.width - 底面宽度（mm）。type:number required:true\n * @param params.height - 高度（mm）。type:number required:true\n * @param params.angle - 楔形角度（度）。type:number required:true\n * @param params.length - 沿切割方向的长度（mm）。type:number required:true\n * @example\n * const w = cad.wedge({ width: 30, height: 20, angle: 45, length: 10 })\n  */\nexport const wedge = defineOp({\n  name: 'wedge',\n  mesh: (params: Record<string, unknown>) => {\n    assertWedgeParams(params)\n    return meshPrimitives.wedge(params as never)\n  },\n  brep: (params: Record<string, unknown>) => {\n    assertWedgeParams(params)\n    return primitiveBrep('wedge', params)\n  },\n  // D11: `wedge(30, 20, 45, 10)` == `wedge({ width: 30, height: 20, angle: 45, length: 10 })`.\n  slotMap: { keys: ['width', 'height', 'angle', 'length'] },\n  paramDims: { width: 'length', height: 'length', angle: 'angle', length: 'length' },\n  naming: { kind: 'unmodeled', reason: 'wedge face vocabulary pending Phase 3' } as Provenance,\n})\n"]}

package/dist/api/profile.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"profile.d.ts","sourceRoot":"","sources":["../../src/api/profile.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;GAeG;AAEH,OAAO,KAAK,EAAE,KAAK,EAAE,MAAM,eAAe,CAAA;AAO1C,OAAO,EAAE,SAAS,EAAE,MAAM,yBAAyB,CAAA;AAQnD,2BAA2B;AAC3B,MAAM,WAAW,cAAc;IAC7B,IAAI,EAAE,MAAM,CAAA;IACZ,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;CACX;AAED,iCAAiC;AACjC,MAAM,WAAW,aAAa;IAC5B,IAAI,EAAE,KAAK,CAAA;IACX,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;IACV,MAAM,EAAE,MAAM,CAAA;IACd,cAAc;IACd,UAAU,EAAE,MAAM,CAAA;IAClB,cAAc;IACd,QAAQ,EAAE,MAAM,CAAA;IAChB,GAAG,EAAE,OAAO,CAAA;IACZ,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;CACX;AAED;;;;;;;GAOG;AACH,MAAM,WAAW,gBAAgB;IAC/B,IAAI,EAAE,QAAQ,CAAA;IACd,YAAY;IACZ,MAAM,EAAE,MAAM,CAAA;IACd,8BAA8B;IAC9B,KAAK,EAAE,MAAM,EAAE,CAAA;IACf,qCAAqC;IACrC,KAAK,EAAE,MAAM,EAAE,CAAA;IACf,aAAa;IACb,cAAc,EAAE,MAAM,EAAE,CAAA;IACxB,iBAAiB;IACjB,QAAQ,CAAC,EAAE,OAAO,CAAA;IAClB,sBAAsB;IACtB,OAAO,CAAC,EAAE,MAAM,EAAE,CAAA;IAClB,mBAAmB;IACnB,KAAK,CAAC,EAAE,MAAM,CAAA;IACd,mBAAmB;IACnB,IAAI,CAAC,EAAE,MAAM,CAAA;CACd;AAED,+BAA+B;AAC/B,MAAM,MAAM,UAAU,GAAG,cAAc,GAAG,aAAa,GAAG,gBAAgB,CAAA;AAE1E,yBAAyB;AACzB,MAAM,WAAW,WAAW;IAC1B,QAAQ,EAAE,UAAU,EAAE,CAAA;CACvB;AAED;;;;;;;;;;;GAWG;AACH,MAAM,MAAM,aAAa,GAAG,SAAS,GAAG,SAAS,EAAE,CAAA;AAEnD,0EAA0E;AAC1E,MAAM,WAAW,aAAa;IAC5B;;;OAGG;IACH,QAAQ,EAAE,WAAW,EAAE,GAAG,aAAa,CAAA;IACvC;;;OAGG;IACH,EAAE,CAAC,EAAE,MAAM,GAAG,MAAM,CAAA;CACrB;AAeD;;;;;;;;;GASG;AACH,wBAAgB,mBAAmB,CAAC,QAAQ,EAAE,OAAO,GAAG,SAAS,EAAE,CAsBlE;AAED;;;;GAIG;AACH,wBAAgB,mBAAmB,CAAC,MAAM,EAAE,MAAM,CAAC,MAAM,EAAE,OAAO,CAAC,GAAG,IAAI,CA2BzE;AAED;;;;;;;;;;;GAWG;AACH,wBAAgB,iBAAiB,CAAC,MAAM,EAAE,aAAa,GAAG,KAAK,CAiD9D;AA+ED;;;;;;;;;;;;;GAaG;AACH,eAAO,MAAM,OAAO;;CAOlB,CAAA"}
+{"version":3,"file":"profile.d.ts","sourceRoot":"","sources":["../../src/api/profile.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;GAeG;AAEH,OAAO,KAAK,EAAE,KAAK,EAAE,MAAM,eAAe,CAAA;AAO1C,OAAO,EAAE,SAAS,EAAE,MAAM,yBAAyB,CAAA;AAQnD,2BAA2B;AAC3B,MAAM,WAAW,cAAc;IAC7B,IAAI,EAAE,MAAM,CAAA;IACZ,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;CACX;AAED,iCAAiC;AACjC,MAAM,WAAW,aAAa;IAC5B,IAAI,EAAE,KAAK,CAAA;IACX,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;IACV,MAAM,EAAE,MAAM,CAAA;IACd,cAAc;IACd,UAAU,EAAE,MAAM,CAAA;IAClB,cAAc;IACd,QAAQ,EAAE,MAAM,CAAA;IAChB,GAAG,EAAE,OAAO,CAAA;IACZ,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;CACX;AAED;;;;;;;GAOG;AACH,MAAM,WAAW,gBAAgB;IAC/B,IAAI,EAAE,QAAQ,CAAA;IACd,YAAY;IACZ,MAAM,EAAE,MAAM,CAAA;IACd,8BAA8B;IAC9B,KAAK,EAAE,MAAM,EAAE,CAAA;IACf,qCAAqC;IACrC,KAAK,EAAE,MAAM,EAAE,CAAA;IACf,aAAa;IACb,cAAc,EAAE,MAAM,EAAE,CAAA;IACxB,iBAAiB;IACjB,QAAQ,CAAC,EAAE,OAAO,CAAA;IAClB,sBAAsB;IACtB,OAAO,CAAC,EAAE,MAAM,EAAE,CAAA;IAClB,mBAAmB;IACnB,KAAK,CAAC,EAAE,MAAM,CAAA;IACd,mBAAmB;IACnB,IAAI,CAAC,EAAE,MAAM,CAAA;CACd;AAED,+BAA+B;AAC/B,MAAM,MAAM,UAAU,GAAG,cAAc,GAAG,aAAa,GAAG,gBAAgB,CAAA;AAE1E,yBAAyB;AACzB,MAAM,WAAW,WAAW;IAC1B,QAAQ,EAAE,UAAU,EAAE,CAAA;CACvB;AAED;;;;;;;;;;;GAWG;AACH,MAAM,MAAM,aAAa,GAAG,SAAS,GAAG,SAAS,EAAE,CAAA;AAEnD,0EAA0E;AAC1E,MAAM,WAAW,aAAa;IAC5B;;;OAGG;IACH,QAAQ,EAAE,WAAW,EAAE,GAAG,aAAa,CAAA;IACvC;;;OAGG;IACH,EAAE,CAAC,EAAE,MAAM,GAAG,MAAM,CAAA;CACrB;AAeD;;;;;;;;;GASG;AACH,wBAAgB,mBAAmB,CAAC,QAAQ,EAAE,OAAO,GAAG,SAAS,EAAE,CAsBlE;AAED;;;;GAIG;AACH,wBAAgB,mBAAmB,CAAC,MAAM,EAAE,MAAM,CAAC,MAAM,EAAE,OAAO,CAAC,GAAG,IAAI,CA2BzE;AAED;;;;;;;;;;;GAWG;AACH,wBAAgB,iBAAiB,CAAC,MAAM,EAAE,aAAa,GAAG,KAAK,CAiD9D;AA+ED;;;;;;;;;;;;;GAaG;AACH,eAAO,MAAM,OAAO;;CAMlB,CAAA"}

package/dist/api/profile.js

@@ -248,7 +248,6 @@ function blueprintArea(entry) {
  * const w = cad.profile({ contours: [{ segments: [{ kind:'line', x1:0,y1:0,x2:10,y2:0 }, ...] }], as: 'wire' })
  */
 export const profile = defineOp({
-    capabilities: ['directEdit'],
     brep(params) {
         assertProfileParams(params);
         return buildProfileShape(params);

package/dist/api/profile.js.map

@@ -1 +1 @@
-{"version":3,"file":"profile.js","sourceRoot":"","sources":["../../src/api/profile.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;GAeG;AAIH,OAAO,EAAE,UAAU,EAAE,MAAM,uBAAuB,CAAA;AAClD,OAAO,EAAE,YAAY,EAAE,MAAM,kBAAkB,CAAA;AAC/C,OAAO,EAAE,QAAQ,EAAE,aAAa,EAAE,MAAM,UAAU,CAAA;AAClD,OAAO,EAAE,QAAQ,EAAE,MAAM,QAAQ,CAAA;AAEjC,OAAO,EAAE,SAAS,EAAE,MAAM,yBAAyB,CAAA;AACnD,OAAO,EAAE,iBAAiB,EAAE,MAAM,kCAAkC,CAAA;AACpE,OAAO,EAAE,kBAAkB,EAAE,MAAM,wBAAwB,CAAA;AAC3D,OAAO,EAAE,WAAW,EAAE,eAAe,EAAE,MAAM,uBAAuB,CAAA;AACpE,OAAO,EAAE,iBAAiB,EAAuB,MAAM,qBAAqB,CAAA;AA8F5E,cAAc;AAEd;;;;;;GAMG;AACH,SAAS,cAAc,CAAC,CAAU;IAChC,OAAO,CAAC,CAAC,CAAC,IAAI,OAAO,CAAC,KAAK,QAAQ,IAAI,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC,CAAC,IAAI,KAAK,CAAC,OAAO,CAAE,CAAe,CAAC,MAAM,CAAC,CAAA;AACpG,CAAC;AAED;;;;;;;;;GASG;AACH,MAAM,UAAU,mBAAmB,CAAC,QAAiB;IACnD,IAAI,cAAc,CAAC,QAAQ,CAAC;QAAE,OAAO,CAAC,QAAQ,CAAC,CAAA;IAC/C,IAAI,CAAC,KAAK,CAAC,OAAO,CAAC,QAAQ,CAAC,EAAE,CAAC;QAC7B,MAAM,IAAI,KAAK,CAAC,8DAA8D,CAAC,CAAA;IACjF,CAAC;IACD,IAAI,QAAQ,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;QAC1B,MAAM,IAAI,KAAK,CAAC,8DAA8D,CAAC,CAAA;IACjF,CAAC;IACD,IAAI,cAAc,CAAC,QAAQ,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC;QAChC,KAAK,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,IAAI,QAAQ,CAAC,OAAO,EAAE,EAAE,CAAC;YACxC,IAAI,CAAC,cAAc,CAAC,CAAC,CAAC,EAAE,CAAC;gBACvB,MAAM,IAAI,KAAK,CAAC,qCAAqC,CAAC,yCAAyC,CAAC,CAAA;YAClG,CAAC;QACH,CAAC;QACD,OAAO,QAAuB,CAAA;IAChC,CAAC;IACD,OAAQ,QAA0B,CAAC,GAAG,CACpC,CAAC,IAAI,EAAE,EAAE,CACP,IAAI,SAAS,CACX,CAAC,IAAI,EAAE,QAAQ,IAAI,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,iBAAiB,CAAC,CAAmB,CAAC,CAAC,CAC1E,CACJ,CAAA;AACH,CAAC;AAED;;;;GAIG;AACH,MAAM,UAAU,mBAAmB,CAAC,MAA+B;IACjE,MAAM,QAAQ,GAAG,MAAM,CAAC,QAAQ,CAAA;IAChC,IAAI,cAAc,CAAC,QAAQ,CAAC;QAAE,OAAM;IACpC,IAAI,CAAC,KAAK,CAAC,OAAO,CAAC,QAAQ,CAAC,IAAI,QAAQ,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;QACtD,MAAM,IAAI,KAAK,CAAC,8DAA8D,CAAC,CAAA;IACjF,CAAC;IACD,4EAA4E;IAC5E,+EAA+E;IAC/E,yDAAyD;IACzD,MAAM,KAAK,GAAG,QAAQ,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,cAAc,CAAC,CAAC,CAAC,CAAC,CAAA;IACpD,IAAI,KAAK,CAAC,IAAI,CAAC,OAAO,CAAC,EAAE,CAAC;QACxB,IAAI,CAAC,KAAK,CAAC,KAAK,CAAC,OAAO,CAAC,EAAE,CAAC;YAC1B,MAAM,GAAG,GAAG,KAAK,CAAC,OAAO,CAAC,KAAK,CAAC,CAAA;YAChC,MAAM,IAAI,KAAK,CACb,qCAAqC,GAAG,oCAAoC,KAAK,CAAC,OAAO,CAAC,IAAI,CAAC,qDAAqD,CACrJ,CAAA;QACH,CAAC;QACD,OAAM;IACR,CAAC;IACD,KAAK,MAAM,IAAI,IAAI,QAAQ,EAAE,CAAC;QAC5B,IAAI,CAAC,IAAI,IAAI,OAAO,IAAI,KAAK,QAAQ,IAAI,CAAC,KAAK,CAAC,OAAO,CAAE,IAAoB,CAAC,QAAQ,CAAC,EAAE,CAAC;YACxF,MAAM,IAAI,KAAK,CAAC,6DAA6D,CAAC,CAAA;QAChF,CAAC;QACD,IAAK,IAAoB,CAAC,QAAQ,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;YAChD,MAAM,IAAI,KAAK,CAAC,gEAAgE,CAAC,CAAA;QACnF,CAAC;IACH,CAAC;AACH,CAAC;AAED;;;;;;;;;;;GAWG;AACH,MAAM,UAAU,iBAAiB,CAAC,MAAqB;IACrD,MAAM,MAAM,GAAG,UAAU,EAAE,CAAA;IAC3B,MAAM,EAAE,GAAG,MAAM,CAAC,EAAE,IAAI,MAAM,CAAA;IAE9B,oDAAoD;IACpD,8CAA8C;IAC9C,sDAAsD;IACtD,qCAAqC;IACrC,EAAE;IACF,iDAAiD;IACjD,4CAA4C;IAC5C,MAAM,SAAS,GAAG,kBAAkB,CAAC,mBAAmB,CAAC,MAAM,CAAC,QAAQ,CAAC,CAAC,CAAA;IAE1E,iDAAiD;IACjD,IAAI,EAAE,KAAK,MAAM,EAAE,CAAC;QAClB,IAAI,IAAI,GAAG,SAAS,CAAC,UAAU,CAAC,CAAC,CAAE,CAAA;QACnC,KAAK,MAAM,KAAK,IAAI,SAAS,CAAC,UAAU,EAAE,CAAC;YACzC,IAAI,aAAa,CAAC,KAAK,CAAC,GAAG,aAAa,CAAC,IAAI,CAAC;gBAAE,IAAI,GAAG,KAAK,CAAA;QAC9D,CAAC;QACD,MAAM,OAAO,GAAG,IAAI,YAAY,iBAAiB,CAAC,CAAC,CAAC,IAAI,CAAC,UAAU,CAAC,CAAC,CAAE,CAAC,CAAC,CAAC,IAAI,CAAA;QAC9E,MAAM,IAAI,GAAG,eAAe,CAAC,MAAM,EAAE,OAAO,CAAC,CAAA;QAC7C,OAAO,aAAa,CAAC,YAAY,CAAC,MAAM,EAAE,IAAI,CAAC,EAAE,EAAE,KAAK,EAAE,IAAI,EAAE,CAAC,CAAA;IACnE,CAAC;IAED,sBAAsB;IACtB,MAAM,KAAK,GAA4C,EAAE,CAAA;IACzD,KAAK,MAAM,KAAK,IAAI,SAAS,CAAC,UAAU,EAAE,CAAC;QACzC,IAAI,KAAK,YAAY,iBAAiB,EAAE,CAAC;YACvC,MAAM,SAAS,GAAG,eAAe,CAAC,MAAM,EAAE,KAAK,CAAC,UAAU,CAAC,CAAC,CAAE,CAAC,CAAA;YAC/D,MAAM,IAAI,GAAG,MAAM,CAAC,QAAQ,CAAC,SAAS,CAAC,CAAA;YACvC,MAAM,KAAK,GAAG,KAAK,CAAC,UAAU,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,eAAe,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC,CAAA;YAC9E,IAAI,KAAK,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;gBACrB,MAAM,KAAK,GAAG,MAAM,CAAC,cAAc,CAAC,IAAI,EAAE,KAAK,CAAC,CAAA;gBAChD,MAAM,CAAC,OAAO,CAAC,IAAI,CAAC,CAAA;gBACpB,KAAK,CAAC,IAAI,CAAC,KAAK,CAAC,CAAA;YACnB,CAAC;iBAAM,CAAC;gBACN,KAAK,CAAC,IAAI,CAAC,IAAI,CAAC,CAAA;YAClB,CAAC;QACH,CAAC;aAAM,CAAC;YACN,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,eAAe,CAAC,MAAM,EAAE,KAAK,CAAC,CAAC,CAAC,CAAA;QAC7D,CAAC;IACH,CAAC;IAED,IAAI,KAAK,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;QACvB,MAAM,CAAC,GAAG,KAAK,CAAC,CAAC,CAAE,CAAA;QACnB,OAAO,QAAQ,CAAC,YAAY,CAAC,MAAM,EAAE,CAAC,CAAC,EAAE,EAAE,KAAK,EAAE,CAAC,EAAE,CAAC,CAAA;IACxD,CAAC;IACD,MAAM,QAAQ,GAAG,MAAM,CAAC,YAAY,CAAC,KAAc,CAAC,CAAA;IACpD,OAAO,QAAQ,CAAC,YAAY,CAAC,MAAM,EAAE,QAAQ,CAAC,EAAE,EAAE,KAAK,EAAE,QAAQ,EAAE,CAAC,CAAA;AACtE,CAAC;AAED;;;;;GAKG;AACH,SAAS,eAAe,CAAC,MAAqB,EAAE,EAAa;IAC3D,MAAM,KAAK,GAAgD,EAAE,CAAA;IAC7D,MAAM,GAAG,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAmB,EAAuC,EAAE,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,CAAA;IAC/F,KAAK,MAAM,CAAC,IAAI,EAAE,CAAC,MAAM,EAAE,CAAC;QAC1B,QAAQ,CAAC,CAAC,MAAM,EAAE,CAAC;YACjB,KAAK,MAAM;gBACT,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,YAAY,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,EAAE,EAAE,CAAC,EAAE,CAAC,CAAC,EAAE,EAAE,CAAC,EAAE,CAAC,EAAE,EAAE,EAAE,CAAC,EAAE,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,CAAA;gBACrH,MAAK;YACP,KAAK,QAAQ;gBACX,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,cAAc,CAAC,CAAC,CAAC,KAAK,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC,CAAA;gBACnD,MAAK;YACP,KAAK,QAAQ,CAAC,CAAC,CAAC;gBACd,iCAAiC;gBACjC,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,WAAW,CAAC,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,IAAI,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,IAAI,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,CAAA;gBAClI,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,WAAW,CAAC,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,IAAI,CAAC,EAAE,CAAC,CAAC,EAAE,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,IAAI,CAAC,EAAE,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,CAAA;gBAClJ,MAAK;YACP,CAAC;YACD,KAAK,SAAS,CAAC,CAAC,CAAC;gBACf,IAAI,CAAC,CAAC,KAAK,CAAC,MAAM,KAAK,QAAQ,EAAE,CAAC;oBAChC,sDAAsD;oBACtD,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,WAAW,CAAC,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,EAAE,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,CAAA;oBACpH,MAAK;gBACP,CAAC;gBACD,MAAM,CAAC,GAAG,WAAW,CAAC,CAAC,CAAC,CAAA;gBACxB,MAAM,GAAG,GAA+C,EAAE,CAAA;gBAC1D,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,IAAI,EAAE,EAAE,CAAC,EAAE,EAAE,CAAC;oBAC7B,MAAM,CAAC,GAAG,CAAC,CAAC,KAAK,GAAG,CAAC,CAAC,CAAC,CAAC,IAAI,GAAG,CAAC,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC,GAAG,EAAE,CAAA;oBACjD,GAAG,CAAC,IAAI,CAAC,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,CAAA;gBACtC,CAAC;gBACD,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,GAAG,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC,EAAE;oBAAE,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,YAAY,CAAC,GAAG,CAAC,CAAC,CAAE,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,CAAE,CAAC,CAAC,CAAA;gBAC9F,MAAK;YACP,CAAC;YACD,KAAK,SAAS,CAAC;YACf,KAAK,SAAS,CAAC,CAAC,CAAC;gBACf,MAAM,CAAC,GAAG,WAAW,CAAC,CAAC,CAAC,CAAA;gBACxB,MAAM,CAAC,GAAG,EAAE,CAAA;gBACZ,MAAM,GAAG,GAA+C,EAAE,CAAA;gBAC1D,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,IAAI,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC;oBAC5B,MAAM,CAAC,GAAG,CAAC,CAAC,KAAK,GAAG,CAAC,CAAC,CAAC,CAAC,IAAI,GAAG,CAAC,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,CAAA;oBAChD,GAAG,CAAC,IAAI,CAAC,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,CAAA;gBACtC,CAAC;gBACD,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,GAAG,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC,EAAE;oBAAE,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,YAAY,CAAC,GAAG,CAAC,CAAC,CAAE,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,CAAE,CAAC,CAAC,CAAA;gBAC9F,MAAK;YACP,CAAC;QACH,CAAC;IACH,CAAC;IACD,OAAO,MAAM,CAAC,QAAQ,CAAC,KAAK,CAAC,CAAA;AAC/B,CAAC;AAED,8DAA8D;AAC9D,SAAS,aAAa,CAAC,KAAoC;IACzD,MAAM,EAAE,GAAG,KAAK,YAAY,iBAAiB,CAAC,CAAC,CAAC,KAAK,CAAC,UAAU,CAAC,CAAC,CAAE,CAAC,CAAC,CAAC,KAAK,CAAA;IAC5E,IAAI,CAAC,GAAG,CAAC,CAAA;IACT,KAAK,MAAM,CAAC,IAAI,EAAE,CAAC,MAAM,EAAE,CAAC;QAC1B,IAAI,CAAC,CAAC,MAAM,KAAK,MAAM,EAAE,CAAC;YACxB,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,EAAE,CAAC,GAAG,CAAC,CAAA;YACtE,SAAQ;QACV,CAAC;QACD,MAAM,CAAC,GAAG,WAAW,CAAC,CAAC,CAAC,CAAA;QACxB,MAAM,QAAQ,GAAG,EAAE,CAAA;QACnB,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,QAAQ,EAAE,CAAC,EAAE,EAAE,CAAC;YAClC,MAAM,EAAE,GAAG,CAAC,CAAC,KAAK,GAAG,CAAC,CAAC,CAAC,CAAC,IAAI,GAAG,CAAC,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC,GAAG,QAAQ,CAAA;YACxD,MAAM,EAAE,GAAG,CAAC,CAAC,KAAK,GAAG,CAAC,CAAC,CAAC,CAAC,IAAI,GAAG,CAAC,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,QAAQ,CAAA;YAC9D,MAAM,CAAC,EAAE,EAAE,EAAE,CAAC,GAAG,eAAe,CAAC,CAAC,EAAE,EAAE,CAAC,CAAA;YACvC,MAAM,CAAC,EAAE,EAAE,EAAE,CAAC,GAAG,eAAe,CAAC,CAAC,EAAE,EAAE,CAAC,CAAA;YACvC,CAAC,IAAI,CAAC,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,CAAC,GAAG,CAAC,CAAA;QAC9B,CAAC;IACH,CAAC;IACD,OAAO,CAAC,CAAA;AACV,CAAC;AAED;;;;;;;;;;;;;GAaG;AACH,MAAM,CAAC,MAAM,OAAO,GAAG,QAAQ,CAAC;IAC9B,YAAY,EAAE,CAAC,YAAY,CAAC;IAC5B,IAAI,CAAC,MAA+B;QAClC,mBAAmB,CAAC,MAAM,CAAC,CAAA;QAC3B,OAAO,iBAAiB,CAAC,MAAkC,CAAC,CAAA;IAC9D,CAAC;IACD,MAAM,EAAE,EAAE,IAAI,EAAE,WAAW,EAAE,QAAQ,EAAE,EAAE,GAAG,EAAE,UAAU,EAAE,KAAK,EAAE,EAAE,EAAE,EAAgB;CACtF,CAAC,CAAA","sourcesContent":["/**\n * api profile — 从 2D 轮廓构面（creator 函数，无输入，brep-only）。\n *\n * 用途：faijs 此前没有「从 2D 轮廓构造 planar face」的能力，导致草图轮廓无法喂给\n * extrude/revolve。本 op 接收 2D 轮廓（线段 + 圆弧），在 z=0 平面用 OCCT 构面：\n *   makeLineEdge/makeArcEdge → makeWire → makeFace（+ addHolesInFace）。\n *\n * 设计：\n * - 输入：{ contours: ProfileLoop[] }，每个 loop = 有序 segments（line / arc，z=0）。\n * - 环语义：嵌套 = 孔，不相交 = 独立岛（多岛 → face 的 compound），见 buildProfileShape。\n * - 圆弧：用起点/中点/终点三点的 makeArcEdge；整圆（sweep≈2π）拆成两段弧。\n * - 输出：Shape（mesh 三角化 + 句柄登记）。brep-only（下游 extrude/revolve 亦 brep-only）。\n *\n * 坐标系：输入 2D 点即 (x, y, 0)，法向 +Z；草图在 Body 局部系内的定位由调用方（fcstd 端口）\n * 在轮廓坐标里预先变换，或由下游特征的 Placement 承担。\n */\n\nimport type { Shape } from '../mesh/types'\nimport type { BrepEngineApi } from '../brep/engine/primitives'\nimport { getBrepApi } from '../brep/handle-bridge'\nimport { solidToShape } from '../brep/brep-ops'\nimport { fromBrep, fromBrepCurve } from '../shape'\nimport { defineOp } from '../sdk'\nimport type { Provenance } from '../topology/naming/lineage'\nimport { Blueprint } from '../geometry2d/blueprint'\nimport { CompoundBlueprint } from '../geometry2d/compound-blueprint'\nimport { organiseBlueprints } from '../geometry2d/organise'\nimport { curveBounds, evaluateCurve2d } from '../geometry2d/curve2d'\nimport { profileSegToCurve, type ProfileSegLike } from '../geometry2d/adapt'\n\n// ── 参数形状（与 fcstd Contour 结构相同，避免引擎依赖端口层）──\n\n/** 直线段（2D，z=0；端点为绝对坐标）。 */\nexport interface ProfileLineSeg {\n  kind: 'line'\n  x1: number\n  y1: number\n  x2: number\n  y2: number\n}\n\n/** 圆弧段（圆心 + 半径 + 起止角，弧度；z=0）。 */\nexport interface ProfileArcSeg {\n  kind: 'arc'\n  cx: number\n  cy: number\n  radius: number\n  /** 起始角（弧度） */\n  startAngle: number\n  /** 终止角（弧度） */\n  endAngle: number\n  ccw: boolean\n  x1: number\n  y1: number\n  x2: number\n  y2: number\n}\n\n/**\n * 参数曲线段（NURBS 控制数据；`kind:'spline'` 同时承载 Bézier 与 B 样条 ——\n * Bézier 就是一条两端重节点钳制的 B 样条，两者同一份数据形态）。\n *\n * 存在的意义：源几何真是一条参数曲线时（Draft 文字轮廓的 Bézier、投影出的\n * B 样条），本段让它以曲线身份进到 wire，而不是先被采样成折线。\n * `first`/`last` 是该边在**基曲线参数轴**上的裁剪区间；省略即整条曲线。\n */\nexport interface ProfileSplineSeg {\n  kind: 'spline'\n  /** 多项式次数 */\n  degree: number\n  /** 扁平控制点 `[x, y, x, y, …]` */\n  poles: number[]\n  /** 去重后的节点值（与 `multiplicities` 平行） */\n  knots: number[]\n  /** 各节点的重数 */\n  multiplicities: number[]\n  /** 周期（闭合回绕）曲线 */\n  periodic?: boolean\n  /** 每个控制点的权；非有理曲线省略 */\n  weights?: number[]\n  /** 裁剪起点（基曲线参数轴） */\n  first?: number\n  /** 裁剪终点（基曲线参数轴） */\n  last?: number\n}\n\n/** 一条有序 2D 轮廓段（直线、圆弧或参数曲线）。 */\nexport type ProfileSeg = ProfileLineSeg | ProfileArcSeg | ProfileSplineSeg\n\n/** 单个轮廓环：有序段序列（首尾相接）。 */\nexport interface ProfileLoop {\n  segments: ProfileSeg[]\n}\n\n/**\n * A 2D contour that is already DRAWN — a pure-data `Blueprint`, or an array of\n * them (one per contour).\n *\n * Why the 2D entries accept this: a drawn contour carries no OCCT handle, and\n * without this path NO op can turn it into a Shape. Measured 2026-09-28 —\n * feeding a drawn `Blueprint` straight to `cad.extrude` fails with\n * `E_BREP_INPUT: argument carries no BREP handle`, and to `cad.sweep` with\n * `INVALID_SHAPE_ID`. The \"draw → `sketchOnPlane` → `extrude`\" pipeline\n * therefore needs this bridge; `cad.profile` takes it too, because both entries\n * share {@link toContourBlueprints} and a split acceptance rule would be a trap.\n */\nexport type DrawnContours = Blueprint | Blueprint[]\n\n/** `cad.profile` 参数：轮廓环集合。语义见 {@link buildProfileShape}（嵌套=孔，不相交=独立岛）。 */\nexport interface ProfileParams {\n  /**\n   * 轮廓来源，两种等价形态：段环数据（`{segments: […]}`）或已绘制轮廓\n   * （`Blueprint` / 其数组）。\n   */\n  contours: ProfileLoop[] | DrawnContours\n  /**\n   * 产物形态：'face'（默认）构面；'wire' 只交出不带面的最大岛外环 wire（1D 曲线），\n   * 供扫掠族（sweep/loft/…）直接作 spine。'wire' 形态丢弃孔环（扫掠脊柱为单闭合轮廓）。\n   */\n  as?: 'face' | 'wire'\n}\n\n// ── 参数自校验 ──\n\n/**\n * True when a `contours` entry is an already-drawn contour rather than a\n * `ProfileLoop` data record. Discriminated on `curves` vs `segments`, so a\n * `ProfileLoop` can never be mistaken for one.\n * @param v - the candidate value.\n * @returns true when `v` is a `Blueprint`-shaped drawn contour.\n */\nfunction isDrawnContour(v: unknown): v is Blueprint {\n  return !!v && typeof v === 'object' && !Array.isArray(v) && Array.isArray((v as Blueprint).curves)\n}\n\n/**\n * Normalize a `contours` argument to `Blueprint[]`.\n *\n * Accepts the segment-loop data form, a single drawn contour, or an array of\n * drawn contours. The two forms are never mixed — a mixed array is a caller bug\n * and is rejected rather than half-interpreted.\n *\n * @param contours - the raw `contours` argument (`ProfileLoop[]` | `Blueprint` | `Blueprint[]`).\n * @returns one `Blueprint` per contour, in input order.\n */\nexport function toContourBlueprints(contours: unknown): Blueprint[] {\n  if (isDrawnContour(contours)) return [contours]\n  if (!Array.isArray(contours)) {\n    throw new Error('E_PROFILE_NO_CONTOURS: profile requires at least one contour')\n  }\n  if (contours.length === 0) {\n    throw new Error('E_PROFILE_NO_CONTOURS: profile requires at least one contour')\n  }\n  if (isDrawnContour(contours[0])) {\n    for (const [i, c] of contours.entries()) {\n      if (!isDrawnContour(c)) {\n        throw new Error(`E_PROFILE_MIXED_CONTOURS: contour ${i} is a segment loop, not a drawn contour`)\n      }\n    }\n    return contours as Blueprint[]\n  }\n  return (contours as ProfileLoop[]).map(\n    (loop) =>\n      new Blueprint(\n        (loop?.segments ?? []).map((s) => profileSegToCurve(s as ProfileSegLike)),\n      ),\n  )\n}\n\n/**\n * Validate profile parameters: `contours` must be a non-empty contour set —\n * either segment loops (each with at least one segment) or drawn contours.\n * @param params the raw profile operation parameters.\n */\nexport function assertProfileParams(params: Record<string, unknown>): void {\n  const contours = params.contours\n  if (isDrawnContour(contours)) return\n  if (!Array.isArray(contours) || contours.length === 0) {\n    throw new Error('E_PROFILE_NO_CONTOURS: profile requires at least one contour')\n  }\n  // Discriminate the whole array at once so a mixed set names the real defect\n  // (E_PROFILE_MIXED_CONTOURS) instead of falling into the loop-shape branch and\n  // reporting a drawn contour as a malformed segment loop.\n  const drawn = contours.map((c) => isDrawnContour(c))\n  if (drawn.some(Boolean)) {\n    if (!drawn.every(Boolean)) {\n      const bad = drawn.indexOf(false)\n      throw new Error(\n        `E_PROFILE_MIXED_CONTOURS: contour ${bad} is a segment loop while contour ${drawn.indexOf(true)} is a drawn contour — the two forms cannot be mixed`,\n      )\n    }\n    return\n  }\n  for (const loop of contours) {\n    if (!loop || typeof loop !== 'object' || !Array.isArray((loop as ProfileLoop).segments)) {\n      throw new Error('E_PROFILE_BAD_LOOP: each contour must have a segments array')\n    }\n    if ((loop as ProfileLoop).segments.length === 0) {\n      throw new Error('E_PROFILE_EMPTY_LOOP: a contour must have at least one segment')\n    }\n  }\n}\n\n/**\n * BREP 路径：2D 轮廓集合 → planar face 集合。\n *\n * GOTCHA（2026-09-26，Beds part16/39）：环语义是「**嵌套 = 孔，不相交 = 独立岛**」\n * （与 FreeCAD 草图一致），不是「面积最大者当外环、其余全当孔」。旧实现把双岛轮廓的\n * 第二个岛判成「洞外面」→ `addHolesInFace` 收到与外环不相交的 wire → 构面退化\n * （7 面、volume 0）。多岛产物 = compound（每岛一面、各带自己的孔），下游\n * `cad.extrude` 对 compound 输入逐面挤出（kernel MakePrism 收复合形状）。\n *\n * @param params - 轮廓来源（段环数据或已绘制轮廓）与产物形态。\n * @returns Shape（单岛为 face；多岛为 face 的 compound；`as:'wire'` 为 1D 曲线）。\n */\nexport function buildProfileShape(params: ProfileParams): Shape {\n  const kernel = getBrepApi()\n  const as = params.as ?? 'face'\n\n  // F2（2026-09-27）：环分类统一到纯 2D 管线 `organiseBlueprints`\n  // （geometry2d/，brepjs 移植）。「嵌套=孔，不相交=独立岛」语义与既有\n  // `profile-multi-island.test.ts` 断言一致；多岛 → 多个顶层，岛+孔 →\n  // CompoundBlueprint（[0]=外环，[1..]=孔）。\n  //\n  // 2026-09-28：段环数据与「已绘制轮廓」（`Blueprint`）在此归一 —— 两条\n  // 来源只差一次 `toContourBlueprints`，下游分类/构面完全共享。\n  const organised = organiseBlueprints(toContourBlueprints(params.contours))\n\n  // 'wire' 形态：只挑面积最大的岛的外环 wire（1D 曲线），供扫掠族作 spine。\n  if (as === 'wire') {\n    let best = organised.blueprints[0]!\n    for (const entry of organised.blueprints) {\n      if (blueprintArea(entry) > blueprintArea(best)) best = entry\n    }\n    const outerBp = best instanceof CompoundBlueprint ? best.blueprints[0]! : best\n    const wire = blueprintToWire(kernel, outerBp)\n    return fromBrepCurve(solidToShape(kernel, wire), { solid: wire })\n  }\n\n  // 每岛一面（岛的外环 + 直接子环为孔）\n  const faces: ReturnType<BrepEngineApi['makeFace']>[] = []\n  for (const entry of organised.blueprints) {\n    if (entry instanceof CompoundBlueprint) {\n      const outerWire = blueprintToWire(kernel, entry.blueprints[0]!)\n      const face = kernel.makeFace(outerWire)\n      const holes = entry.blueprints.slice(1).map((h) => blueprintToWire(kernel, h))\n      if (holes.length > 0) {\n        const faced = kernel.addHolesInFace(face, holes)\n        kernel.release(face)\n        faces.push(faced)\n      } else {\n        faces.push(face)\n      }\n    } else {\n      faces.push(kernel.makeFace(blueprintToWire(kernel, entry)))\n    }\n  }\n\n  if (faces.length === 1) {\n    const f = faces[0]!\n    return fromBrep(solidToShape(kernel, f), { solid: f })\n  }\n  const compound = kernel.makeCompound(faces as never)\n  return fromBrep(solidToShape(kernel, compound), { solid: compound })\n}\n\n/**\n * Convert a pure-2D Blueprint to a 3D wire (z=0) for planar face construction.\n * @param kernel - the BREP engine handle-bridge.\n * @param bp - the blueprint whose ordered curves become wire edges.\n * @returns the wire handle.\n */\nfunction blueprintToWire(kernel: BrepEngineApi, bp: Blueprint): ReturnType<BrepEngineApi['makeWire']> {\n  const edges: ReturnType<BrepEngineApi['makeLineEdge']>[] = []\n  const pt3 = ([x, y]: [number, number]): { x: number; y: number; z: number } => ({ x, y, z: 0 })\n  for (const c of bp.curves) {\n    switch (c.kind2d) {\n      case 'line':\n        edges.push(kernel.makeLineEdge({ x: c.ox, y: c.oy, z: 0 }, { x: c.ox + c.dx * c.len, y: c.oy + c.dy * c.len, z: 0 }))\n        break\n      case 'bezier':\n        edges.push(kernel.makeBezierEdge(c.poles.map(pt3)))\n        break\n      case 'circle': {\n        // 完整圆：拆两段半圆 makeArcEdge（避免三点退化）。\n        edges.push(kernel.makeArcEdge(pt3(evaluateCurve2d(c, 0)), pt3(evaluateCurve2d(c, Math.PI / 2)), pt3(evaluateCurve2d(c, Math.PI))))\n        edges.push(kernel.makeArcEdge(pt3(evaluateCurve2d(c, Math.PI)), pt3(evaluateCurve2d(c, (3 * Math.PI) / 2)), pt3(evaluateCurve2d(c, 2 * Math.PI))))\n        break\n      }\n      case 'trimmed': {\n        if (c.basis.kind2d === 'circle') {\n          // 圆弧：以 start/mid/end 三点构真实 makeArcEdge（保留光滑柱面，勿拆成折线段）\n          edges.push(kernel.makeArcEdge(pt3(evaluateCurve2d(c, 0)), pt3(evaluateCurve2d(c, 0.5)), pt3(evaluateCurve2d(c, 1))))\n          break\n        }\n        const b = curveBounds(c)\n        const pts: Array<{ x: number; y: number; z: number }> = []\n        for (let k = 0; k <= 32; k++) {\n          const t = b.first + ((b.last - b.first) * k) / 32\n          pts.push(pt3(evaluateCurve2d(c, t)))\n        }\n        for (let k = 0; k < pts.length - 1; k++) edges.push(kernel.makeLineEdge(pts[k]!, pts[k + 1]!))\n        break\n      }\n      case 'ellipse':\n      case 'bspline': {\n        const b = curveBounds(c)\n        const n = 32\n        const pts: Array<{ x: number; y: number; z: number }> = []\n        for (let k = 0; k <= n; k++) {\n          const t = b.first + ((b.last - b.first) * k) / n\n          pts.push(pt3(evaluateCurve2d(c, t)))\n        }\n        for (let k = 0; k < pts.length - 1; k++) edges.push(kernel.makeLineEdge(pts[k]!, pts[k + 1]!))\n        break\n      }\n    }\n  }\n  return kernel.makeWire(edges)\n}\n\n/** 顶层 Blueprint/CompoundBlueprint 的近似有符号面积（用于 wire 最大岛选择）。 */\nfunction blueprintArea(entry: Blueprint | CompoundBlueprint): number {\n  const bp = entry instanceof CompoundBlueprint ? entry.blueprints[0]! : entry\n  let a = 0\n  for (const c of bp.curves) {\n    if (c.kind2d === 'line') {\n      a += (c.ox * (c.oy + c.dy * c.len) - (c.ox + c.dx * c.len) * c.oy) / 2\n      continue\n    }\n    const b = curveBounds(c)\n    const nSamples = 32\n    for (let k = 0; k < nSamples; k++) {\n      const t0 = b.first + ((b.last - b.first) * k) / nSamples\n      const t1 = b.first + ((b.last - b.first) * (k + 1)) / nSamples\n      const [x0, y0] = evaluateCurve2d(c, t0)\n      const [x1, y1] = evaluateCurve2d(c, t1)\n      a += (x0 * y1 - x1 * y0) / 2\n    }\n  }\n  return a\n}\n\n/**\n * 从 2D 轮廓构造平面（creator，无输入）。仅 BREP 可用。\n * @group 创建\n * @inputs 0\n * @async false\n * @qual ok\n * @name profile\n * @returns Shape 平面几何（mesh 三角化 + BREP 句柄）；`as:'wire'` 时返回 1D 曲线（kind:'curve'）。\n * @param params.contours - 有序 2D 轮廓（线段/圆弧；外环 + 孔），或已绘制轮廓（单个 Blueprint 或其数组）。type:ProfileLoop[]|Blueprint|Blueprint[] required:true\n * @param params.as - 产物形态：'face'（默认）构面；'wire' 只交外环 wire（1D 曲线）。type:'face'|'wire' required:false\n * @example\n * const f = cad.profile({ contours: [{ segments: [{ kind:'line', x1:0,y1:0,x2:10,y2:0 }, ...] }] })\n * const w = cad.profile({ contours: [{ segments: [{ kind:'line', x1:0,y1:0,x2:10,y2:0 }, ...] }], as: 'wire' })\n */\nexport const profile = defineOp({\n  capabilities: ['directEdit'],\n  brep(params: Record<string, unknown>) {\n    assertProfileParams(params)\n    return buildProfileShape(params as unknown as ProfileParams)\n  },\n  naming: { kind: 'construct', newFaces: { via: 'explicit', vocab: [] } } as Provenance,\n})"]}
+{"version":3,"file":"profile.js","sourceRoot":"","sources":["../../src/api/profile.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;GAeG;AAIH,OAAO,EAAE,UAAU,EAAE,MAAM,uBAAuB,CAAA;AAClD,OAAO,EAAE,YAAY,EAAE,MAAM,kBAAkB,CAAA;AAC/C,OAAO,EAAE,QAAQ,EAAE,aAAa,EAAE,MAAM,UAAU,CAAA;AAClD,OAAO,EAAE,QAAQ,EAAE,MAAM,QAAQ,CAAA;AAEjC,OAAO,EAAE,SAAS,EAAE,MAAM,yBAAyB,CAAA;AACnD,OAAO,EAAE,iBAAiB,EAAE,MAAM,kCAAkC,CAAA;AACpE,OAAO,EAAE,kBAAkB,EAAE,MAAM,wBAAwB,CAAA;AAC3D,OAAO,EAAE,WAAW,EAAE,eAAe,EAAE,MAAM,uBAAuB,CAAA;AACpE,OAAO,EAAE,iBAAiB,EAAuB,MAAM,qBAAqB,CAAA;AA8F5E,cAAc;AAEd;;;;;;GAMG;AACH,SAAS,cAAc,CAAC,CAAU;IAChC,OAAO,CAAC,CAAC,CAAC,IAAI,OAAO,CAAC,KAAK,QAAQ,IAAI,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC,CAAC,IAAI,KAAK,CAAC,OAAO,CAAE,CAAe,CAAC,MAAM,CAAC,CAAA;AACpG,CAAC;AAED;;;;;;;;;GASG;AACH,MAAM,UAAU,mBAAmB,CAAC,QAAiB;IACnD,IAAI,cAAc,CAAC,QAAQ,CAAC;QAAE,OAAO,CAAC,QAAQ,CAAC,CAAA;IAC/C,IAAI,CAAC,KAAK,CAAC,OAAO,CAAC,QAAQ,CAAC,EAAE,CAAC;QAC7B,MAAM,IAAI,KAAK,CAAC,8DAA8D,CAAC,CAAA;IACjF,CAAC;IACD,IAAI,QAAQ,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;QAC1B,MAAM,IAAI,KAAK,CAAC,8DAA8D,CAAC,CAAA;IACjF,CAAC;IACD,IAAI,cAAc,CAAC,QAAQ,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC;QAChC,KAAK,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,IAAI,QAAQ,CAAC,OAAO,EAAE,EAAE,CAAC;YACxC,IAAI,CAAC,cAAc,CAAC,CAAC,CAAC,EAAE,CAAC;gBACvB,MAAM,IAAI,KAAK,CAAC,qCAAqC,CAAC,yCAAyC,CAAC,CAAA;YAClG,CAAC;QACH,CAAC;QACD,OAAO,QAAuB,CAAA;IAChC,CAAC;IACD,OAAQ,QAA0B,CAAC,GAAG,CACpC,CAAC,IAAI,EAAE,EAAE,CACP,IAAI,SAAS,CACX,CAAC,IAAI,EAAE,QAAQ,IAAI,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,iBAAiB,CAAC,CAAmB,CAAC,CAAC,CAC1E,CACJ,CAAA;AACH,CAAC;AAED;;;;GAIG;AACH,MAAM,UAAU,mBAAmB,CAAC,MAA+B;IACjE,MAAM,QAAQ,GAAG,MAAM,CAAC,QAAQ,CAAA;IAChC,IAAI,cAAc,CAAC,QAAQ,CAAC;QAAE,OAAM;IACpC,IAAI,CAAC,KAAK,CAAC,OAAO,CAAC,QAAQ,CAAC,IAAI,QAAQ,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;QACtD,MAAM,IAAI,KAAK,CAAC,8DAA8D,CAAC,CAAA;IACjF,CAAC;IACD,4EAA4E;IAC5E,+EAA+E;IAC/E,yDAAyD;IACzD,MAAM,KAAK,GAAG,QAAQ,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,cAAc,CAAC,CAAC,CAAC,CAAC,CAAA;IACpD,IAAI,KAAK,CAAC,IAAI,CAAC,OAAO,CAAC,EAAE,CAAC;QACxB,IAAI,CAAC,KAAK,CAAC,KAAK,CAAC,OAAO,CAAC,EAAE,CAAC;YAC1B,MAAM,GAAG,GAAG,KAAK,CAAC,OAAO,CAAC,KAAK,CAAC,CAAA;YAChC,MAAM,IAAI,KAAK,CACb,qCAAqC,GAAG,oCAAoC,KAAK,CAAC,OAAO,CAAC,IAAI,CAAC,qDAAqD,CACrJ,CAAA;QACH,CAAC;QACD,OAAM;IACR,CAAC;IACD,KAAK,MAAM,IAAI,IAAI,QAAQ,EAAE,CAAC;QAC5B,IAAI,CAAC,IAAI,IAAI,OAAO,IAAI,KAAK,QAAQ,IAAI,CAAC,KAAK,CAAC,OAAO,CAAE,IAAoB,CAAC,QAAQ,CAAC,EAAE,CAAC;YACxF,MAAM,IAAI,KAAK,CAAC,6DAA6D,CAAC,CAAA;QAChF,CAAC;QACD,IAAK,IAAoB,CAAC,QAAQ,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;YAChD,MAAM,IAAI,KAAK,CAAC,gEAAgE,CAAC,CAAA;QACnF,CAAC;IACH,CAAC;AACH,CAAC;AAED;;;;;;;;;;;GAWG;AACH,MAAM,UAAU,iBAAiB,CAAC,MAAqB;IACrD,MAAM,MAAM,GAAG,UAAU,EAAE,CAAA;IAC3B,MAAM,EAAE,GAAG,MAAM,CAAC,EAAE,IAAI,MAAM,CAAA;IAE9B,oDAAoD;IACpD,8CAA8C;IAC9C,sDAAsD;IACtD,qCAAqC;IACrC,EAAE;IACF,iDAAiD;IACjD,4CAA4C;IAC5C,MAAM,SAAS,GAAG,kBAAkB,CAAC,mBAAmB,CAAC,MAAM,CAAC,QAAQ,CAAC,CAAC,CAAA;IAE1E,iDAAiD;IACjD,IAAI,EAAE,KAAK,MAAM,EAAE,CAAC;QAClB,IAAI,IAAI,GAAG,SAAS,CAAC,UAAU,CAAC,CAAC,CAAE,CAAA;QACnC,KAAK,MAAM,KAAK,IAAI,SAAS,CAAC,UAAU,EAAE,CAAC;YACzC,IAAI,aAAa,CAAC,KAAK,CAAC,GAAG,aAAa,CAAC,IAAI,CAAC;gBAAE,IAAI,GAAG,KAAK,CAAA;QAC9D,CAAC;QACD,MAAM,OAAO,GAAG,IAAI,YAAY,iBAAiB,CAAC,CAAC,CAAC,IAAI,CAAC,UAAU,CAAC,CAAC,CAAE,CAAC,CAAC,CAAC,IAAI,CAAA;QAC9E,MAAM,IAAI,GAAG,eAAe,CAAC,MAAM,EAAE,OAAO,CAAC,CAAA;QAC7C,OAAO,aAAa,CAAC,YAAY,CAAC,MAAM,EAAE,IAAI,CAAC,EAAE,EAAE,KAAK,EAAE,IAAI,EAAE,CAAC,CAAA;IACnE,CAAC;IAED,sBAAsB;IACtB,MAAM,KAAK,GAA4C,EAAE,CAAA;IACzD,KAAK,MAAM,KAAK,IAAI,SAAS,CAAC,UAAU,EAAE,CAAC;QACzC,IAAI,KAAK,YAAY,iBAAiB,EAAE,CAAC;YACvC,MAAM,SAAS,GAAG,eAAe,CAAC,MAAM,EAAE,KAAK,CAAC,UAAU,CAAC,CAAC,CAAE,CAAC,CAAA;YAC/D,MAAM,IAAI,GAAG,MAAM,CAAC,QAAQ,CAAC,SAAS,CAAC,CAAA;YACvC,MAAM,KAAK,GAAG,KAAK,CAAC,UAAU,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,eAAe,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC,CAAA;YAC9E,IAAI,KAAK,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;gBACrB,MAAM,KAAK,GAAG,MAAM,CAAC,cAAc,CAAC,IAAI,EAAE,KAAK,CAAC,CAAA;gBAChD,MAAM,CAAC,OAAO,CAAC,IAAI,CAAC,CAAA;gBACpB,KAAK,CAAC,IAAI,CAAC,KAAK,CAAC,CAAA;YACnB,CAAC;iBAAM,CAAC;gBACN,KAAK,CAAC,IAAI,CAAC,IAAI,CAAC,CAAA;YAClB,CAAC;QACH,CAAC;aAAM,CAAC;YACN,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,eAAe,CAAC,MAAM,EAAE,KAAK,CAAC,CAAC,CAAC,CAAA;QAC7D,CAAC;IACH,CAAC;IAED,IAAI,KAAK,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;QACvB,MAAM,CAAC,GAAG,KAAK,CAAC,CAAC,CAAE,CAAA;QACnB,OAAO,QAAQ,CAAC,YAAY,CAAC,MAAM,EAAE,CAAC,CAAC,EAAE,EAAE,KAAK,EAAE,CAAC,EAAE,CAAC,CAAA;IACxD,CAAC;IACD,MAAM,QAAQ,GAAG,MAAM,CAAC,YAAY,CAAC,KAAc,CAAC,CAAA;IACpD,OAAO,QAAQ,CAAC,YAAY,CAAC,MAAM,EAAE,QAAQ,CAAC,EAAE,EAAE,KAAK,EAAE,QAAQ,EAAE,CAAC,CAAA;AACtE,CAAC;AAED;;;;;GAKG;AACH,SAAS,eAAe,CAAC,MAAqB,EAAE,EAAa;IAC3D,MAAM,KAAK,GAAgD,EAAE,CAAA;IAC7D,MAAM,GAAG,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAmB,EAAuC,EAAE,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,CAAA;IAC/F,KAAK,MAAM,CAAC,IAAI,EAAE,CAAC,MAAM,EAAE,CAAC;QAC1B,QAAQ,CAAC,CAAC,MAAM,EAAE,CAAC;YACjB,KAAK,MAAM;gBACT,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,YAAY,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,EAAE,EAAE,CAAC,EAAE,CAAC,CAAC,EAAE,EAAE,CAAC,EAAE,CAAC,EAAE,EAAE,EAAE,CAAC,EAAE,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,CAAA;gBACrH,MAAK;YACP,KAAK,QAAQ;gBACX,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,cAAc,CAAC,CAAC,CAAC,KAAK,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC,CAAA;gBACnD,MAAK;YACP,KAAK,QAAQ,CAAC,CAAC,CAAC;gBACd,iCAAiC;gBACjC,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,WAAW,CAAC,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,IAAI,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,IAAI,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,CAAA;gBAClI,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,WAAW,CAAC,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,IAAI,CAAC,EAAE,CAAC,CAAC,EAAE,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,IAAI,CAAC,EAAE,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,CAAA;gBAClJ,MAAK;YACP,CAAC;YACD,KAAK,SAAS,CAAC,CAAC,CAAC;gBACf,IAAI,CAAC,CAAC,KAAK,CAAC,MAAM,KAAK,QAAQ,EAAE,CAAC;oBAChC,sDAAsD;oBACtD,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,WAAW,CAAC,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,EAAE,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,CAAA;oBACpH,MAAK;gBACP,CAAC;gBACD,MAAM,CAAC,GAAG,WAAW,CAAC,CAAC,CAAC,CAAA;gBACxB,MAAM,GAAG,GAA+C,EAAE,CAAA;gBAC1D,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,IAAI,EAAE,EAAE,CAAC,EAAE,EAAE,CAAC;oBAC7B,MAAM,CAAC,GAAG,CAAC,CAAC,KAAK,GAAG,CAAC,CAAC,CAAC,CAAC,IAAI,GAAG,CAAC,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC,GAAG,EAAE,CAAA;oBACjD,GAAG,CAAC,IAAI,CAAC,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,CAAA;gBACtC,CAAC;gBACD,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,GAAG,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC,EAAE;oBAAE,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,YAAY,CAAC,GAAG,CAAC,CAAC,CAAE,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,CAAE,CAAC,CAAC,CAAA;gBAC9F,MAAK;YACP,CAAC;YACD,KAAK,SAAS,CAAC;YACf,KAAK,SAAS,CAAC,CAAC,CAAC;gBACf,MAAM,CAAC,GAAG,WAAW,CAAC,CAAC,CAAC,CAAA;gBACxB,MAAM,CAAC,GAAG,EAAE,CAAA;gBACZ,MAAM,GAAG,GAA+C,EAAE,CAAA;gBAC1D,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,IAAI,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC;oBAC5B,MAAM,CAAC,GAAG,CAAC,CAAC,KAAK,GAAG,CAAC,CAAC,CAAC,CAAC,IAAI,GAAG,CAAC,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,CAAA;oBAChD,GAAG,CAAC,IAAI,CAAC,GAAG,CAAC,eAAe,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,CAAA;gBACtC,CAAC;gBACD,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,GAAG,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC,EAAE;oBAAE,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,YAAY,CAAC,GAAG,CAAC,CAAC,CAAE,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,CAAE,CAAC,CAAC,CAAA;gBAC9F,MAAK;YACP,CAAC;QACH,CAAC;IACH,CAAC;IACD,OAAO,MAAM,CAAC,QAAQ,CAAC,KAAK,CAAC,CAAA;AAC/B,CAAC;AAED,8DAA8D;AAC9D,SAAS,aAAa,CAAC,KAAoC;IACzD,MAAM,EAAE,GAAG,KAAK,YAAY,iBAAiB,CAAC,CAAC,CAAC,KAAK,CAAC,UAAU,CAAC,CAAC,CAAE,CAAC,CAAC,CAAC,KAAK,CAAA;IAC5E,IAAI,CAAC,GAAG,CAAC,CAAA;IACT,KAAK,MAAM,CAAC,IAAI,EAAE,CAAC,MAAM,EAAE,CAAC;QAC1B,IAAI,CAAC,CAAC,MAAM,KAAK,MAAM,EAAE,CAAC;YACxB,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,EAAE,CAAC,GAAG,CAAC,CAAA;YACtE,SAAQ;QACV,CAAC;QACD,MAAM,CAAC,GAAG,WAAW,CAAC,CAAC,CAAC,CAAA;QACxB,MAAM,QAAQ,GAAG,EAAE,CAAA;QACnB,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,QAAQ,EAAE,CAAC,EAAE,EAAE,CAAC;YAClC,MAAM,EAAE,GAAG,CAAC,CAAC,KAAK,GAAG,CAAC,CAAC,CAAC,CAAC,IAAI,GAAG,CAAC,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC,GAAG,QAAQ,CAAA;YACxD,MAAM,EAAE,GAAG,CAAC,CAAC,KAAK,GAAG,CAAC,CAAC,CAAC,CAAC,IAAI,GAAG,CAAC,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,QAAQ,CAAA;YAC9D,MAAM,CAAC,EAAE,EAAE,EAAE,CAAC,GAAG,eAAe,CAAC,CAAC,EAAE,EAAE,CAAC,CAAA;YACvC,MAAM,CAAC,EAAE,EAAE,EAAE,CAAC,GAAG,eAAe,CAAC,CAAC,EAAE,EAAE,CAAC,CAAA;YACvC,CAAC,IAAI,CAAC,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,CAAC,GAAG,CAAC,CAAA;QAC9B,CAAC;IACH,CAAC;IACD,OAAO,CAAC,CAAA;AACV,CAAC;AAED;;;;;;;;;;;;;GAaG;AACH,MAAM,CAAC,MAAM,OAAO,GAAG,QAAQ,CAAC;IAC9B,IAAI,CAAC,MAA+B;QAClC,mBAAmB,CAAC,MAAM,CAAC,CAAA;QAC3B,OAAO,iBAAiB,CAAC,MAAkC,CAAC,CAAA;IAC9D,CAAC;IACD,MAAM,EAAE,EAAE,IAAI,EAAE,WAAW,EAAE,QAAQ,EAAE,EAAE,GAAG,EAAE,UAAU,EAAE,KAAK,EAAE,EAAE,EAAE,EAAgB;CACtF,CAAC,CAAA","sourcesContent":["/**\n * api profile — 从 2D 轮廓构面（creator 函数，无输入，brep-only）。\n *\n * 用途：faijs 此前没有「从 2D 轮廓构造 planar face」的能力，导致草图轮廓无法喂给\n * extrude/revolve。本 op 接收 2D 轮廓（线段 + 圆弧），在 z=0 平面用 OCCT 构面：\n *   makeLineEdge/makeArcEdge → makeWire → makeFace（+ addHolesInFace）。\n *\n * 设计：\n * - 输入：{ contours: ProfileLoop[] }，每个 loop = 有序 segments（line / arc，z=0）。\n * - 环语义：嵌套 = 孔，不相交 = 独立岛（多岛 → face 的 compound），见 buildProfileShape。\n * - 圆弧：用起点/中点/终点三点的 makeArcEdge；整圆（sweep≈2π）拆成两段弧。\n * - 输出：Shape（mesh 三角化 + 句柄登记）。brep-only（下游 extrude/revolve 亦 brep-only）。\n *\n * 坐标系：输入 2D 点即 (x, y, 0)，法向 +Z；草图在 Body 局部系内的定位由调用方（fcstd 端口）\n * 在轮廓坐标里预先变换，或由下游特征的 Placement 承担。\n */\n\nimport type { Shape } from '../mesh/types'\nimport type { BrepEngineApi } from '../brep/engine/primitives'\nimport { getBrepApi } from '../brep/handle-bridge'\nimport { solidToShape } from '../brep/brep-ops'\nimport { fromBrep, fromBrepCurve } from '../shape'\nimport { defineOp } from '../sdk'\nimport type { Provenance } from '../topology/naming/lineage'\nimport { Blueprint } from '../geometry2d/blueprint'\nimport { CompoundBlueprint } from '../geometry2d/compound-blueprint'\nimport { organiseBlueprints } from '../geometry2d/organise'\nimport { curveBounds, evaluateCurve2d } from '../geometry2d/curve2d'\nimport { profileSegToCurve, type ProfileSegLike } from '../geometry2d/adapt'\n\n// ── 参数形状（与 fcstd Contour 结构相同，避免引擎依赖端口层）──\n\n/** 直线段（2D，z=0；端点为绝对坐标）。 */\nexport interface ProfileLineSeg {\n  kind: 'line'\n  x1: number\n  y1: number\n  x2: number\n  y2: number\n}\n\n/** 圆弧段（圆心 + 半径 + 起止角，弧度；z=0）。 */\nexport interface ProfileArcSeg {\n  kind: 'arc'\n  cx: number\n  cy: number\n  radius: number\n  /** 起始角（弧度） */\n  startAngle: number\n  /** 终止角（弧度） */\n  endAngle: number\n  ccw: boolean\n  x1: number\n  y1: number\n  x2: number\n  y2: number\n}\n\n/**\n * 参数曲线段（NURBS 控制数据；`kind:'spline'` 同时承载 Bézier 与 B 样条 ——\n * Bézier 就是一条两端重节点钳制的 B 样条，两者同一份数据形态）。\n *\n * 存在的意义：源几何真是一条参数曲线时（Draft 文字轮廓的 Bézier、投影出的\n * B 样条），本段让它以曲线身份进到 wire，而不是先被采样成折线。\n * `first`/`last` 是该边在**基曲线参数轴**上的裁剪区间；省略即整条曲线。\n */\nexport interface ProfileSplineSeg {\n  kind: 'spline'\n  /** 多项式次数 */\n  degree: number\n  /** 扁平控制点 `[x, y, x, y, …]` */\n  poles: number[]\n  /** 去重后的节点值（与 `multiplicities` 平行） */\n  knots: number[]\n  /** 各节点的重数 */\n  multiplicities: number[]\n  /** 周期（闭合回绕）曲线 */\n  periodic?: boolean\n  /** 每个控制点的权；非有理曲线省略 */\n  weights?: number[]\n  /** 裁剪起点（基曲线参数轴） */\n  first?: number\n  /** 裁剪终点（基曲线参数轴） */\n  last?: number\n}\n\n/** 一条有序 2D 轮廓段（直线、圆弧或参数曲线）。 */\nexport type ProfileSeg = ProfileLineSeg | ProfileArcSeg | ProfileSplineSeg\n\n/** 单个轮廓环：有序段序列（首尾相接）。 */\nexport interface ProfileLoop {\n  segments: ProfileSeg[]\n}\n\n/**\n * A 2D contour that is already DRAWN — a pure-data `Blueprint`, or an array of\n * them (one per contour).\n *\n * Why the 2D entries accept this: a drawn contour carries no OCCT handle, and\n * without this path NO op can turn it into a Shape. Measured 2026-09-28 —\n * feeding a drawn `Blueprint` straight to `cad.extrude` fails with\n * `E_BREP_INPUT: argument carries no BREP handle`, and to `cad.sweep` with\n * `INVALID_SHAPE_ID`. The \"draw → `sketchOnPlane` → `extrude`\" pipeline\n * therefore needs this bridge; `cad.profile` takes it too, because both entries\n * share {@link toContourBlueprints} and a split acceptance rule would be a trap.\n */\nexport type DrawnContours = Blueprint | Blueprint[]\n\n/** `cad.profile` 参数：轮廓环集合。语义见 {@link buildProfileShape}（嵌套=孔，不相交=独立岛）。 */\nexport interface ProfileParams {\n  /**\n   * 轮廓来源，两种等价形态：段环数据（`{segments: […]}`）或已绘制轮廓\n   * （`Blueprint` / 其数组）。\n   */\n  contours: ProfileLoop[] | DrawnContours\n  /**\n   * 产物形态：'face'（默认）构面；'wire' 只交出不带面的最大岛外环 wire（1D 曲线），\n   * 供扫掠族（sweep/loft/…）直接作 spine。'wire' 形态丢弃孔环（扫掠脊柱为单闭合轮廓）。\n   */\n  as?: 'face' | 'wire'\n}\n\n// ── 参数自校验 ──\n\n/**\n * True when a `contours` entry is an already-drawn contour rather than a\n * `ProfileLoop` data record. Discriminated on `curves` vs `segments`, so a\n * `ProfileLoop` can never be mistaken for one.\n * @param v - the candidate value.\n * @returns true when `v` is a `Blueprint`-shaped drawn contour.\n */\nfunction isDrawnContour(v: unknown): v is Blueprint {\n  return !!v && typeof v === 'object' && !Array.isArray(v) && Array.isArray((v as Blueprint).curves)\n}\n\n/**\n * Normalize a `contours` argument to `Blueprint[]`.\n *\n * Accepts the segment-loop data form, a single drawn contour, or an array of\n * drawn contours. The two forms are never mixed — a mixed array is a caller bug\n * and is rejected rather than half-interpreted.\n *\n * @param contours - the raw `contours` argument (`ProfileLoop[]` | `Blueprint` | `Blueprint[]`).\n * @returns one `Blueprint` per contour, in input order.\n */\nexport function toContourBlueprints(contours: unknown): Blueprint[] {\n  if (isDrawnContour(contours)) return [contours]\n  if (!Array.isArray(contours)) {\n    throw new Error('E_PROFILE_NO_CONTOURS: profile requires at least one contour')\n  }\n  if (contours.length === 0) {\n    throw new Error('E_PROFILE_NO_CONTOURS: profile requires at least one contour')\n  }\n  if (isDrawnContour(contours[0])) {\n    for (const [i, c] of contours.entries()) {\n      if (!isDrawnContour(c)) {\n        throw new Error(`E_PROFILE_MIXED_CONTOURS: contour ${i} is a segment loop, not a drawn contour`)\n      }\n    }\n    return contours as Blueprint[]\n  }\n  return (contours as ProfileLoop[]).map(\n    (loop) =>\n      new Blueprint(\n        (loop?.segments ?? []).map((s) => profileSegToCurve(s as ProfileSegLike)),\n      ),\n  )\n}\n\n/**\n * Validate profile parameters: `contours` must be a non-empty contour set —\n * either segment loops (each with at least one segment) or drawn contours.\n * @param params the raw profile operation parameters.\n */\nexport function assertProfileParams(params: Record<string, unknown>): void {\n  const contours = params.contours\n  if (isDrawnContour(contours)) return\n  if (!Array.isArray(contours) || contours.length === 0) {\n    throw new Error('E_PROFILE_NO_CONTOURS: profile requires at least one contour')\n  }\n  // Discriminate the whole array at once so a mixed set names the real defect\n  // (E_PROFILE_MIXED_CONTOURS) instead of falling into the loop-shape branch and\n  // reporting a drawn contour as a malformed segment loop.\n  const drawn = contours.map((c) => isDrawnContour(c))\n  if (drawn.some(Boolean)) {\n    if (!drawn.every(Boolean)) {\n      const bad = drawn.indexOf(false)\n      throw new Error(\n        `E_PROFILE_MIXED_CONTOURS: contour ${bad} is a segment loop while contour ${drawn.indexOf(true)} is a drawn contour — the two forms cannot be mixed`,\n      )\n    }\n    return\n  }\n  for (const loop of contours) {\n    if (!loop || typeof loop !== 'object' || !Array.isArray((loop as ProfileLoop).segments)) {\n      throw new Error('E_PROFILE_BAD_LOOP: each contour must have a segments array')\n    }\n    if ((loop as ProfileLoop).segments.length === 0) {\n      throw new Error('E_PROFILE_EMPTY_LOOP: a contour must have at least one segment')\n    }\n  }\n}\n\n/**\n * BREP 路径：2D 轮廓集合 → planar face 集合。\n *\n * GOTCHA（2026-09-26，Beds part16/39）：环语义是「**嵌套 = 孔，不相交 = 独立岛**」\n * （与 FreeCAD 草图一致），不是「面积最大者当外环、其余全当孔」。旧实现把双岛轮廓的\n * 第二个岛判成「洞外面」→ `addHolesInFace` 收到与外环不相交的 wire → 构面退化\n * （7 面、volume 0）。多岛产物 = compound（每岛一面、各带自己的孔），下游\n * `cad.extrude` 对 compound 输入逐面挤出（kernel MakePrism 收复合形状）。\n *\n * @param params - 轮廓来源（段环数据或已绘制轮廓）与产物形态。\n * @returns Shape（单岛为 face；多岛为 face 的 compound；`as:'wire'` 为 1D 曲线）。\n */\nexport function buildProfileShape(params: ProfileParams): Shape {\n  const kernel = getBrepApi()\n  const as = params.as ?? 'face'\n\n  // F2（2026-09-27）：环分类统一到纯 2D 管线 `organiseBlueprints`\n  // （geometry2d/，brepjs 移植）。「嵌套=孔，不相交=独立岛」语义与既有\n  // `profile-multi-island.test.ts` 断言一致；多岛 → 多个顶层，岛+孔 →\n  // CompoundBlueprint（[0]=外环，[1..]=孔）。\n  //\n  // 2026-09-28：段环数据与「已绘制轮廓」（`Blueprint`）在此归一 —— 两条\n  // 来源只差一次 `toContourBlueprints`，下游分类/构面完全共享。\n  const organised = organiseBlueprints(toContourBlueprints(params.contours))\n\n  // 'wire' 形态：只挑面积最大的岛的外环 wire（1D 曲线），供扫掠族作 spine。\n  if (as === 'wire') {\n    let best = organised.blueprints[0]!\n    for (const entry of organised.blueprints) {\n      if (blueprintArea(entry) > blueprintArea(best)) best = entry\n    }\n    const outerBp = best instanceof CompoundBlueprint ? best.blueprints[0]! : best\n    const wire = blueprintToWire(kernel, outerBp)\n    return fromBrepCurve(solidToShape(kernel, wire), { solid: wire })\n  }\n\n  // 每岛一面（岛的外环 + 直接子环为孔）\n  const faces: ReturnType<BrepEngineApi['makeFace']>[] = []\n  for (const entry of organised.blueprints) {\n    if (entry instanceof CompoundBlueprint) {\n      const outerWire = blueprintToWire(kernel, entry.blueprints[0]!)\n      const face = kernel.makeFace(outerWire)\n      const holes = entry.blueprints.slice(1).map((h) => blueprintToWire(kernel, h))\n      if (holes.length > 0) {\n        const faced = kernel.addHolesInFace(face, holes)\n        kernel.release(face)\n        faces.push(faced)\n      } else {\n        faces.push(face)\n      }\n    } else {\n      faces.push(kernel.makeFace(blueprintToWire(kernel, entry)))\n    }\n  }\n\n  if (faces.length === 1) {\n    const f = faces[0]!\n    return fromBrep(solidToShape(kernel, f), { solid: f })\n  }\n  const compound = kernel.makeCompound(faces as never)\n  return fromBrep(solidToShape(kernel, compound), { solid: compound })\n}\n\n/**\n * Convert a pure-2D Blueprint to a 3D wire (z=0) for planar face construction.\n * @param kernel - the BREP engine handle-bridge.\n * @param bp - the blueprint whose ordered curves become wire edges.\n * @returns the wire handle.\n */\nfunction blueprintToWire(kernel: BrepEngineApi, bp: Blueprint): ReturnType<BrepEngineApi['makeWire']> {\n  const edges: ReturnType<BrepEngineApi['makeLineEdge']>[] = []\n  const pt3 = ([x, y]: [number, number]): { x: number; y: number; z: number } => ({ x, y, z: 0 })\n  for (const c of bp.curves) {\n    switch (c.kind2d) {\n      case 'line':\n        edges.push(kernel.makeLineEdge({ x: c.ox, y: c.oy, z: 0 }, { x: c.ox + c.dx * c.len, y: c.oy + c.dy * c.len, z: 0 }))\n        break\n      case 'bezier':\n        edges.push(kernel.makeBezierEdge(c.poles.map(pt3)))\n        break\n      case 'circle': {\n        // 完整圆：拆两段半圆 makeArcEdge（避免三点退化）。\n        edges.push(kernel.makeArcEdge(pt3(evaluateCurve2d(c, 0)), pt3(evaluateCurve2d(c, Math.PI / 2)), pt3(evaluateCurve2d(c, Math.PI))))\n        edges.push(kernel.makeArcEdge(pt3(evaluateCurve2d(c, Math.PI)), pt3(evaluateCurve2d(c, (3 * Math.PI) / 2)), pt3(evaluateCurve2d(c, 2 * Math.PI))))\n        break\n      }\n      case 'trimmed': {\n        if (c.basis.kind2d === 'circle') {\n          // 圆弧：以 start/mid/end 三点构真实 makeArcEdge（保留光滑柱面，勿拆成折线段）\n          edges.push(kernel.makeArcEdge(pt3(evaluateCurve2d(c, 0)), pt3(evaluateCurve2d(c, 0.5)), pt3(evaluateCurve2d(c, 1))))\n          break\n        }\n        const b = curveBounds(c)\n        const pts: Array<{ x: number; y: number; z: number }> = []\n        for (let k = 0; k <= 32; k++) {\n          const t = b.first + ((b.last - b.first) * k) / 32\n          pts.push(pt3(evaluateCurve2d(c, t)))\n        }\n        for (let k = 0; k < pts.length - 1; k++) edges.push(kernel.makeLineEdge(pts[k]!, pts[k + 1]!))\n        break\n      }\n      case 'ellipse':\n      case 'bspline': {\n        const b = curveBounds(c)\n        const n = 32\n        const pts: Array<{ x: number; y: number; z: number }> = []\n        for (let k = 0; k <= n; k++) {\n          const t = b.first + ((b.last - b.first) * k) / n\n          pts.push(pt3(evaluateCurve2d(c, t)))\n        }\n        for (let k = 0; k < pts.length - 1; k++) edges.push(kernel.makeLineEdge(pts[k]!, pts[k + 1]!))\n        break\n      }\n    }\n  }\n  return kernel.makeWire(edges)\n}\n\n/** 顶层 Blueprint/CompoundBlueprint 的近似有符号面积（用于 wire 最大岛选择）。 */\nfunction blueprintArea(entry: Blueprint | CompoundBlueprint): number {\n  const bp = entry instanceof CompoundBlueprint ? entry.blueprints[0]! : entry\n  let a = 0\n  for (const c of bp.curves) {\n    if (c.kind2d === 'line') {\n      a += (c.ox * (c.oy + c.dy * c.len) - (c.ox + c.dx * c.len) * c.oy) / 2\n      continue\n    }\n    const b = curveBounds(c)\n    const nSamples = 32\n    for (let k = 0; k < nSamples; k++) {\n      const t0 = b.first + ((b.last - b.first) * k) / nSamples\n      const t1 = b.first + ((b.last - b.first) * (k + 1)) / nSamples\n      const [x0, y0] = evaluateCurve2d(c, t0)\n      const [x1, y1] = evaluateCurve2d(c, t1)\n      a += (x0 * y1 - x1 * y0) / 2\n    }\n  }\n  return a\n}\n\n/**\n * 从 2D 轮廓构造平面（creator，无输入）。仅 BREP 可用。\n * @group 创建\n * @inputs 0\n * @async false\n * @qual ok\n * @name profile\n * @returns Shape 平面几何（mesh 三角化 + BREP 句柄）；`as:'wire'` 时返回 1D 曲线（kind:'curve'）。\n * @param params.contours - 有序 2D 轮廓（线段/圆弧；外环 + 孔），或已绘制轮廓（单个 Blueprint 或其数组）。type:ProfileLoop[]|Blueprint|Blueprint[] required:true\n * @param params.as - 产物形态：'face'（默认）构面；'wire' 只交外环 wire（1D 曲线）。type:'face'|'wire' required:false\n * @example\n * const f = cad.profile({ contours: [{ segments: [{ kind:'line', x1:0,y1:0,x2:10,y2:0 }, ...] }] })\n * const w = cad.profile({ contours: [{ segments: [{ kind:'line', x1:0,y1:0,x2:10,y2:0 }, ...] }], as: 'wire' })\n */\nexport const profile = defineOp({\n  brep(params: Record<string, unknown>) {\n    assertProfileParams(params)\n    return buildProfileShape(params as unknown as ProfileParams)\n  },\n  naming: { kind: 'construct', newFaces: { via: 'explicit', vocab: [] } } as Provenance,\n})"]}

package/dist/api/punch-hole.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"punch-hole.d.ts","sourceRoot":"","sources":["../../src/api/punch-hole.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;GAqBG;AACH,OAAO,KAAK,EAAE,KAAK,EAAE,MAAM,eAAe,CAAA;AAC1C,OAAO,KAAK,EAAE,aAAa,EAAE,MAAM,2BAA2B,CAAA;AAC9D,OAAO,KAAK,EAAE,UAAU,EAAE,MAAM,sBAAsB,CAAA;AAQtD,OAAO,EAAqB,KAAK,YAAY,EAAE,MAAM,kBAAkB,CAAA;AAIvE,OAAO,EAAuB,KAAK,WAAW,EAAE,MAAM,WAAW,CAAA;AAEjE,sCAAsC;AACtC,MAAM,WAAW,eAAe;IAC9B,8FAA8F;IAC9F,QAAQ,EAAE,WAAW,EAAE,CAAA;IACvB,qDAAqD;IACrD,EAAE,EAAE,KAAK,CAAA;IACT,yEAAyE;IACzE,IAAI,EAAE,YAAY,CAAA;IAClB,gFAAgF;IAChF,MAAM,CAAC,EAAE,MAAM,GAAG,IAAI,CAAA;IACtB,sGAAsG;IACtG,UAAU,CAAC,EAAE,MAAM,CAAA;IACnB,oEAAoE;IACpE,SAAS,CAAC,EAAE,UAAU,GAAG,QAAQ,GAAG,QAAQ,CAAA;CAC7C;AAuED;;;;;;;GAOG;AACH,wBAAgB,YAAY,CAAC,MAAM,EAAE,aAAa,EAAE,KAAK,EAAE,UAAU,EAAE,MAAM,EAAE,eAAe,GAAG,UAAU,CA+F1G;AAED;;;;;GAKG;AACH,wBAAgB,cAAc,CAAC,MAAM,EAAE,aAAa,EAAE,MAAM,EAAE,eAAe,GAAG,KAAK,CAOpF;AAED;;;;;;;;;;;;;;GAcG;AACH,eAAO,MAAM,SAAS;;CAQpB,CAAA"}
+{"version":3,"file":"punch-hole.d.ts","sourceRoot":"","sources":["../../src/api/punch-hole.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;GAqBG;AACH,OAAO,KAAK,EAAE,KAAK,EAAE,MAAM,eAAe,CAAA;AAC1C,OAAO,KAAK,EAAE,aAAa,EAAE,MAAM,2BAA2B,CAAA;AAC9D,OAAO,KAAK,EAAE,UAAU,EAAE,MAAM,sBAAsB,CAAA;AAQtD,OAAO,EAAqB,KAAK,YAAY,EAAE,MAAM,kBAAkB,CAAA;AAIvE,OAAO,EAAuB,KAAK,WAAW,EAAE,MAAM,WAAW,CAAA;AAEjE,sCAAsC;AACtC,MAAM,WAAW,eAAe;IAC9B,8FAA8F;IAC9F,QAAQ,EAAE,WAAW,EAAE,CAAA;IACvB,qDAAqD;IACrD,EAAE,EAAE,KAAK,CAAA;IACT,yEAAyE;IACzE,IAAI,EAAE,YAAY,CAAA;IAClB,gFAAgF;IAChF,MAAM,CAAC,EAAE,MAAM,GAAG,IAAI,CAAA;IACtB,sGAAsG;IACtG,UAAU,CAAC,EAAE,MAAM,CAAA;IACnB,oEAAoE;IACpE,SAAS,CAAC,EAAE,UAAU,GAAG,QAAQ,GAAG,QAAQ,CAAA;CAC7C;AAuED;;;;;;;GAOG;AACH,wBAAgB,YAAY,CAAC,MAAM,EAAE,aAAa,EAAE,KAAK,EAAE,UAAU,EAAE,MAAM,EAAE,eAAe,GAAG,UAAU,CA+F1G;AAED;;;;;GAKG;AACH,wBAAgB,cAAc,CAAC,MAAM,EAAE,aAAa,EAAE,MAAM,EAAE,eAAe,GAAG,KAAK,CAOpF;AAED;;;;;;;;;;;;;;GAcG;AACH,eAAO,MAAM,SAAS;;CAOpB,CAAA"}

package/dist/api/punch-hole.js

@@ -196,7 +196,6 @@ export function buildPunchHole(kernel, params) {
  * @param params.scaleMode - UV mapping: 'original' | 'bounds' | 'native'.type:string required:false
  */
 export const punchHole = defineOp({
-    capabilities: ['directEdit'],
     engines: ['occt'],
     brep(params) {
         assertProfileParams(params);

package/dist/api/punch-hole.js.map

@@ -1 +1 @@
-{"version":3,"file":"punch-hole.js","sourceRoot":"","sources":["../../src/api/punch-hole.ts"],"names":[],"mappings":"AAyBA,OAAO,EAAE,UAAU,EAAE,MAAM,uBAAuB,CAAA;AAClD,OAAO,EAAE,YAAY,EAAE,MAAM,kBAAkB,CAAA;AAC/C,OAAO,EAAE,QAAQ,EAAE,MAAM,EAAE,MAAM,UAAU,CAAA;AAC3C,OAAO,EAAE,aAAa,EAAE,MAAM,2BAA2B,CAAA;AACzD,OAAO,EAAE,QAAQ,EAAE,MAAM,QAAQ,CAAA;AAEjC,OAAO,EAAE,YAAY,EAAE,MAAM,oBAAoB,CAAA;AACjD,OAAO,EAAE,iBAAiB,EAAqB,MAAM,kBAAkB,CAAA;AACvE,OAAO,EAAE,SAAS,EAAE,cAAc,EAAc,MAAM,iCAAiC,CAAA;AACvF,OAAO,EAAE,eAAe,EAAE,MAAM,uBAAuB,CAAA;AACvD,OAAO,EAAE,iBAAiB,EAAE,MAAM,qBAAqB,CAAA;AACvD,OAAO,EAAE,mBAAmB,EAAoB,MAAM,WAAW,CAAA;AAkBjE,oFAAoF;AACpF,MAAM,cAAc,GAAG,EAAE,CAAA;AAEzB;;;;;;;GAOG;AACH,SAAS,UAAU,CAAC,MAAqB,EAAE,KAAiB,EAAE,MAAiC;IAC7F,IAAI,MAAM,KAAK,IAAI,IAAI,MAAM,KAAK,SAAS;QAAE,OAAO,MAAM,CAAA;IAC1D,MAAM,GAAG,GAAG,MAAM,CAAC,cAAc,CAAC,KAAK,CAAC,CAAA;IACxC,MAAM,IAAI,GAAG,IAAI,CAAC,KAAK,CAAC,GAAG,CAAC,IAAI,GAAG,GAAG,CAAC,IAAI,EAAE,GAAG,CAAC,IAAI,GAAG,GAAG,CAAC,IAAI,EAAE,GAAG,CAAC,IAAI,GAAG,GAAG,CAAC,IAAI,CAAC,CAAA;IACtF,OAAO,IAAI,GAAG,cAAc,CAAA;AAC9B,CAAC;AAED;;;;;;;;;;;;;;;GAeG;AACH,SAAS,cAAc,CACrB,MAAqB,EACrB,IAAgB,EAChB,EAAS,EACT,MAA2C,EAC3C,CAAsC,EACtC,OAAoB;IAEpB,MAAM,GAAG,GAA0C,EAAE,CAAA;IACrD,4DAA4D;IAC5D,MAAM,IAAI,GAAG,CAAC,CAAsC,EAAE,EAAE;QACtD,MAAM,IAAI,GAAG,GAAG,CAAC,GAAG,CAAC,MAAM,GAAG,CAAC,CAAC,CAAA;QAChC,IAAI,IAAI,IAAI,IAAI,CAAC,GAAG,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,IAAI,IAAI,IAAI,CAAC,GAAG,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,IAAI,IAAI,IAAI,CAAC,GAAG,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,IAAI;YAAE,OAAM;QACnH,GAAG,CAAC,IAAI,CAAC,CAAC,CAAC,CAAA;IACb,CAAC,CAAA;IACD,KAAK,MAAM,GAAG,IAAI,OAAO,CAAC,QAAQ,EAAE,CAAC;QACnC,MAAM,CAAC,GAAG,iBAAiB,CAAC,GAAY,CAAC,CAAA;QACzC,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,IAAI,EAAE,EAAE,CAAC,EAAE,EAAE,CAAC;YAC7B,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,eAAe,CAAC,CAAC,EAAE,CAAC,GAAG,EAAE,CAAC,CAAA;YACzC,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,EAAE,CAAC,CAAC,CAAA;YACvB,MAAM,GAAG,GAAG,MAAM,CAAC,cAAc,CAAC,IAAI,EAAE,CAAC,EAAE,CAAC,CAAC,CAAA;YAC7C,mFAAmF;YACnF,MAAM,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,GAAG,MAAM,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,GAAG,MAAM,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,GAAG,MAAM,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAA;YACxF,IAAI,CAAC,EAAE,CAAC,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,CAAA;QACtE,CAAC;IACH,CAAC;IACD,4DAA4D;IAC5D,IAAI,GAAG,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QACnB,MAAM,CAAC,GAAG,GAAG,CAAC,CAAC,CAAE,CAAA;QACjB,MAAM,CAAC,GAAG,GAAG,CAAC,GAAG,CAAC,MAAM,GAAG,CAAC,CAAE,CAAA;QAC9B,IAAI,IAAI,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,IAAI,IAAI,IAAI,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,IAAI,IAAI,IAAI,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,IAAI;YAAE,GAAG,CAAC,GAAG,EAAE,CAAA;IACvG,CAAC;IACD,OAAO,GAAG,CAAA;AACZ,CAAC;AAED;;;;;;;GAOG;AACH,MAAM,UAAU,YAAY,CAAC,MAAqB,EAAE,KAAiB,EAAE,MAAuB;IAC5F,MAAM,IAAI,GAAG,iBAAiB,CAAC,MAAM,EAAE,MAAM,CAAC,EAAE,EAAE,MAAM,CAAC,IAAI,CAAC,CAAA;IAC9D,MAAM,IAAI,GAAG,MAAM,CAAC,SAAS,IAAI,UAAU,CAAA;IAC3C,MAAM,KAAK,GAAG,UAAU,CAAC,MAAM,EAAE,KAAK,EAAE,MAAM,CAAC,MAAM,IAAI,IAAI,CAAC,CAAA;IAE9D,MAAM,KAAK,GAAG,MAAM,CAAC,UAAU,IAAI,CAAC,CAAA;IACpC,MAAM,QAAQ,GAAG,CAAC,KAAK,GAAG,IAAI,CAAC,EAAE,CAAC,GAAG,GAAG,CAAA;IAExC,wDAAwD;IACxD,MAAM,EAAE,GAAG,MAAM,CAAC,aAAa,CAAC,IAAI,EAAE,CAAC,EAAE,CAAC,CAAC,CAAA;IAC3C,MAAM,IAAI,GAAG,IAAI,CAAC,KAAK,CAAC,EAAE,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAA;IAC9C,MAAM,CAAC,GAAG,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,IAAI,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,IAAI,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,IAAI,EAAE,CAAA;IAE5D,iDAAiD;IACjD,MAAM,EAAE,GAAG,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC,CAAA;IAChC,MAAM,IAAI,GAAG,CAAC,EAAE,CAAC,IAAI,GAAG,EAAE,CAAC,IAAI,CAAC,GAAG,CAAC,CAAA;IACpC,MAAM,IAAI,GAAG,CAAC,EAAE,CAAC,IAAI,GAAG,EAAE,CAAC,IAAI,CAAC,GAAG,CAAC,CAAA;IACpC,MAAM,MAAM,GAAG,MAAM,CAAC,cAAc,CAAC,IAAI,EAAE,IAAI,EAAE,IAAI,CAAC,CAAA;IAEtD,MAAM,MAAM,GAAG,EAAE,CAAA;IACjB,IAAI,MAAM,GAAG,KAAK,CAAA;IAClB,KAAK,MAAM,OAAO,IAAI,MAAM,CAAC,QAAQ,EAAE,CAAC;QACtC,MAAM,MAAM,GAAG,OAAO,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,iBAAiB,CAAC,CAAU,CAAC,CAAC,CAAA;QACzE,MAAM,EAAE,GAAG,SAAS,CAAC,IAAI,EAAE,cAAc,CAAC,MAAM,CAAC,EAAE,MAAM,CAAC,CAAA;QAC1D,MAAM,KAAK,GAAG,cAAc,CAAC,MAAM,EAAE,IAAI,EAAE,EAAE,EAAE,MAAM,EAAE,CAAC,EAAE,OAAO,CAAC,CAAA;QAClE,IAAI,KAAK,CAAC,MAAM,GAAG,CAAC;YAAE,MAAM,IAAI,KAAK,CAAC,iEAAiE,CAAC,CAAA;QAExG,gCAAgC;QAChC,MAAM,UAAU,GAAG,EAAkB,CAAA;QACrC,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,KAAK,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;YACtC,MAAM,CAAC,GAAG,KAAK,CAAC,CAAC,CAAE,CAAA;YACnB,MAAM,CAAC,GAAG,KAAK,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,KAAK,CAAC,MAAM,CAAE,CAAA;YACxC,UAAU,CAAC,IAAI,CAAC,MAAM,CAAC,YAAY,CAAC,CAAC,EAAE,CAAC,CAAU,CAAC,CAAA;QACrD,CAAC;QAED,IAAI,KAAiB,CAAA;QACrB,IAAI,KAAK,KAAK,CAAC,EAAE,CAAC;YAChB,4EAA4E;YAC5E,2EAA2E;YAC3E,6EAA6E;YAC7E,6EAA6E;YAC7E,MAAM,KAAK,GAAG,KAAK,GAAG,IAAI,CAAC,GAAG,CAAC,QAAQ,CAAC,CAAA;YACxC,4EAA4E;YAC5E,0EAA0E;YAC1E,0EAA0E;YAC1E,4EAA4E;YAC5E,4EAA4E;YAC5E,0BAA0B;YAC1B,MAAM,EAAE,GAAG,KAAK,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,KAAK,CAAC,MAAM,CAAA;YAC5D,MAAM,EAAE,GAAG,KAAK,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,KAAK,CAAC,MAAM,CAAA;YAC5D,MAAM,EAAE,GAAG,KAAK,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,KAAK,CAAC,MAAM,CAAA;YAC5D,IAAI,OAAO,GAAG,CAAC,CAAA;YACf,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,KAAK,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;gBACtC,MAAM,CAAC,GAAG,KAAK,CAAC,CAAC,CAAE,CAAA;gBACnB,MAAM,CAAC,GAAG,KAAK,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,KAAK,CAAC,MAAM,CAAE,CAAA;gBACxC,wDAAwD;gBACxD,MAAM,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,GAAG,EAAE,CAAA;gBAC/B,MAAM,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,GAAG,EAAE,CAAA;gBAC/B,MAAM,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,GAAG,EAAE,CAAA;gBAC/B,OAAO,IAAI,IAAI,CAAC,KAAK,CAAC,EAAE,EAAE,EAAE,EAAE,EAAE,CAAC,CAAA;YACnC,CAAC;YACD,MAAM,IAAI,GAAG,OAAO,GAAG,KAAK,CAAC,MAAM,CAAA;YACnC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC,IAAI,IAAI,IAAI,IAAI,IAAI,KAAK,IAAI,IAAI,GAAG,KAAK,EAAE,CAAC;gBACpE,MAAM,IAAI,KAAK,CACb,wCAAwC,KAAK,WAAW,KAAK,CAAC,OAAO,CAAC,CAAC,CAAC,yBAAyB,IAAI,CAAC,OAAO,CAAC,CAAC,CAAC,aAAa,KAAK,EAAE,CACrI,CAAA;YACH,CAAC;YACD,MAAM,CAAC,GAAG,CAAC,GAAG,KAAK,GAAG,IAAI,CAAA;YAC1B,MAAM,SAAS,GAAG,KAAK,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC;gBAClC,CAAC,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,KAAK;gBACpC,CAAC,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,KAAK;gBACpC,CAAC,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,KAAK;aACrC,CAAC,CAAC,CAAA;YACH,MAAM,QAAQ,GAAG,SAAS,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE;gBACtC,MAAM,CAAC,GAAG,SAAS,CAAC,CAAC,CAAE,CAAA;gBACvB,MAAM,CAAC,GAAG,SAAS,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,SAAS,CAAC,MAAM,CAAE,CAAA;gBAChD,OAAO,MAAM,CAAC,YAAY,CAAC,CAAC,EAAE,CAAC,CAAU,CAAA;YAC3C,CAAC,CAAiB,CAAA;YAClB,MAAM,CAAC,GAAG,aAAa,EAAE,CAAA;YACzB,KAAK,GAAG,CAAC,CAAC,IAAI,CACZ,CAAC,MAAM,CAAC,QAAQ,CAAC,UAAU,CAAC,EAAE,MAAM,CAAC,QAAQ,CAAC,QAAQ,CAAC,CAAuB,EAC9E,IAAI,EACJ,IAAI,CACoB,CAAA;QAC5B,CAAC;aAAM,CAAC;YACN,MAAM,SAAS,GAAG,MAAM,CAAC,QAAQ,CAAC,MAAM,CAAC,QAAQ,CAAC,UAAU,CAAC,CAAC,CAAA;YAC9D,KAAK,GAAG,MAAM,CAAC,OAAO,CAAC,SAAS,EAAE,CAAC,CAAC,CAAC,CAAC,GAAG,KAAK,EAAE,CAAC,CAAC,CAAC,CAAC,GAAG,KAAK,EAAE,CAAC,CAAC,CAAC,CAAC,GAAG,KAAK,CAAC,CAAA;QAC7E,CAAC;QACD,IAAI,CAAC;YACH,MAAM,GAAG,MAAM,CAAC,GAAG,CAAC,MAAM,EAAE,KAAK,CAAC,CAAA;QACpC,CAAC;gBAAS,CAAC;YACT,MAAM,CAAC,OAAO,CAAC,KAAK,CAAC,CAAA;QACvB,CAAC;IACH,CAAC;IACD,OAAO,MAAM,CAAA;AACf,CAAC;AAED;;;;;GAKG;AACH,MAAM,UAAU,cAAc,CAAC,MAAqB,EAAE,MAAuB;IAC3E,MAAM,KAAK,GAAG,MAAM,CAAC,MAAM,CAAC,EAAE,CAA2B,CAAA;IACzD,IAAI,CAAC,KAAK,EAAE,CAAC;QACX,MAAM,IAAI,YAAY,CAAC,yBAAyB,EAAE,MAAM,EAAE,0CAA0C,CAAC,CAAA;IACvG,CAAC;IACD,MAAM,KAAK,GAAG,YAAY,CAAC,MAAM,EAAE,KAAK,EAAE,MAAM,CAAC,CAAA;IACjD,OAAO,QAAQ,CAAC,YAAY,CAAC,MAAM,EAAE,KAAK,CAAC,EAAE,EAAE,KAAK,EAAE,KAAK,EAAE,CAAC,CAAA;AAChE,CAAC;AAED;;;;;;;;;;;;;;GAcG;AACH,MAAM,CAAC,MAAM,SAAS,GAAG,QAAQ,CAAC;IAChC,YAAY,EAAE,CAAC,YAAY,CAAC;IAC5B,OAAO,EAAE,CAAC,MAAM,CAAC;IACjB,IAAI,CAAC,MAA+B;QAClC,mBAAmB,CAAC,MAAM,CAAC,CAAA;QAC3B,OAAO,cAAc,CAAC,UAAU,EAAE,EAAE,MAAoC,CAAC,CAAA;IAC3E,CAAC;IACD,MAAM,EAAE,EAAE,IAAI,EAAE,WAAW,EAAE,QAAQ,EAAE,EAAE,GAAG,EAAE,UAAU,EAAE,KAAK,EAAE,EAAE,EAAE,EAAgB;CACtF,CAAC,CAAA","sourcesContent":["/**\n * @platform occt — 本文件 import occt-kernel（getOcctKernel：draft-angle punch\n * 的 frustum loft 走原生 occt `loft`，适配器层无此能力）。\n *\n * `cad.punchHole`: cut a face-placed 2D profile out of a solid (E4 pocket/through\n * hole with optional taper).\n *\n * The hole profile is a set of closed 2D contours placed on a target face of the\n * solid (the same placement step as `cad.sketchOnFace`). Each placed contour is\n * extruded from the face *into* the part along the face inward normal, and the\n * resulting prism is the \"punch\" tool; a Boolean `cut` removes it from the host —\n * a profile-based pocket (`height` given) or through-hole (`height: null`).\n *\n * v1 scope: the punch is a straight linear prism, or — when `draftAngle > 0` — a\n * **tapered frustum** whose walls recede by `draftAngle` over the punch depth\n * (built as an occt `loft` between a mouth wire in the host plane and an inset\n * end wire at depth `depth·tan(draftAngle)`). The op is a composition over the\n * E3 on-surface placement + `kernel.extrude`/occt `loft` + `kernel.cut` and\n * declares `engines: ['occt']` (surface sampling + Boolean cut + draft loft need\n * the BREP platform).\n * @module\n */\nimport type { Shape } from '../mesh/types'\nimport type { BrepEngineApi } from '../brep/engine/primitives'\nimport type { BrepHandle } from '../brep/engine/types'\nimport { getBrepApi } from '../brep/handle-bridge'\nimport { solidToShape } from '../brep/brep-ops'\nimport { fromBrep, brepOf } from '../shape'\nimport { getOcctKernel } from '../occt-kernel/occtKernel'\nimport { defineOp } from '../sdk'\nimport type { Provenance } from '../topology/naming/lineage'\nimport { TopoRefError } from '../topology/naming'\nimport { resolveFaceHandle, type FaceSelector } from './sketch-on-face'\nimport { makeUvMap, curves2dBounds, type UvMap } from '../geometry2d/bridge/on-surface'\nimport { evaluateCurve2d } from '../geometry2d/curve2d'\nimport { profileSegToCurve } from '../geometry2d/adapt'\nimport { assertProfileParams, type ProfileLoop } from './profile'\n\n/** Parameters for `cad.punchHole`. */\nexport interface PunchHoleParams {\n  /** Ordered 2D closed contour(s) describing the hole profile (same shape as `cad.profile`). */\n  contours: ProfileLoop[]\n  /** The target solid on which the hole is punched. */\n  on: Shape\n  /** The host face: a 1-based ordinal or a `cad.faceRef(on, n)` result. */\n  face: FaceSelector\n  /** Removal depth along the face inward normal. `null`/absent = through hole. */\n  height?: number | null\n  /** Taper on the hole walls (degrees; default 0 = straight wall). Built as a frustum via occt loft. */\n  draftAngle?: number\n  /** UV mapping mode for contour placement (default `'original'`). */\n  scaleMode?: 'original' | 'bounds' | 'native'\n}\n\n/** Extra length past the host extent so a through-hole clears the opposite side. */\nconst THROUGH_MARGIN = 10\n\n/**\n * Depth of the punch extrusion: the explicit `height`, or the host's bounding-box\n * diagonal (+ margin) for a through hole.\n * @param kernel - the BREP engine surface.\n * @param solid - the host solid handle.\n * @param height - the blind depth, or null for through.\n * @returns the positive extrude length.\n */\nfunction punchDepth(kernel: BrepEngineApi, solid: BrepHandle, height: number | null | undefined): number {\n  if (height !== null && height !== undefined) return height\n  const box = kernel.getBoundingBox(solid)\n  const diag = Math.hypot(box.xmax - box.xmin, box.ymax - box.ymin, box.zmax - box.zmin)\n  return diag + THROUGH_MARGIN\n}\n\n/**\n * Map a contour's sampled 2D points onto the host face's UV space, evaluate the\n * surface there, and return a clean, coplanar polygon (sample points projected\n * onto the host's plane through its normal). Rebuilding a straight-edged planar\n * face is deliberate: extruding the on-surface bridge's wire-derived face (a\n * near-coplanar shell, z varies by ~1e-7) collapses its OCCT volume to ~0 — see\n * GOTCHA `punch-hole` (E4).\n * @param kernel - the BREP engine surface.\n * @param host - the host face handle.\n * @param mode - the face scale mode.\n * @param uv - the UV mapping for this contour.\n * @param anchor - an in-plane point of the host face (for the projection plane).\n * @param n - the host face outward normal (unit).\n * @param contour - the 2D contour to punch.\n * @returns a flat polygon of 3D points (each approximately in the host plane).\n */\nfunction buildPolygon3d(\n  kernel: BrepEngineApi,\n  host: BrepHandle,\n  uv: UvMap,\n  anchor: { x: number; y: number; z: number },\n  n: { x: number; y: number; z: number },\n  contour: ProfileLoop,\n): { x: number; y: number; z: number }[] {\n  const pts: { x: number; y: number; z: number }[] = []\n  // Dedupe consecutive coincident samples across the contour.\n  const push = (p: { x: number; y: number; z: number }) => {\n    const last = pts[pts.length - 1]\n    if (last && Math.abs(last.x - p.x) < 1e-7 && Math.abs(last.y - p.y) < 1e-7 && Math.abs(last.z - p.z) < 1e-7) return\n    pts.push(p)\n  }\n  for (const seg of contour.segments) {\n    const c = profileSegToCurve(seg as never)\n    for (let k = 0; k <= 12; k++) {\n      const [x, y] = evaluateCurve2d(c, k / 12)\n      const [u, v] = uv(x, y)\n      const raw = kernel.pointOnSurface(host, u, v)\n      // Project onto the host face plane (through `anchor` + `n`) for exact coplanarity.\n      const d = (raw.x - anchor.x) * n.x + (raw.y - anchor.y) * n.y + (raw.z - anchor.z) * n.z\n      push({ x: raw.x - n.x * d, y: raw.y - n.y * d, z: raw.z - n.z * d })\n    }\n  }\n  // Close the loop: drop a trailing point equal to the first.\n  if (pts.length > 1) {\n    const a = pts[0]!\n    const b = pts[pts.length - 1]!\n    if (Math.abs(a.x - b.x) < 1e-7 && Math.abs(a.y - b.y) < 1e-7 && Math.abs(a.z - b.z) < 1e-7) pts.pop()\n  }\n  return pts\n}\n\n/**\n * Build and cut the punch solid for every placed profile on the host face and\n * Boolean-cut it from `solid`, returning the holed solid handle.\n * @param kernel - the BREP engine surface.\n * @param solid - the host solid handle.\n * @param params - the punch parameters.\n * @returns the holed solid handle.\n */\nexport function punchSolidOf(kernel: BrepEngineApi, solid: BrepHandle, params: PunchHoleParams): BrepHandle {\n  const host = resolveFaceHandle(kernel, params.on, params.face)\n  const mode = params.scaleMode ?? 'original'\n  const depth = punchDepth(kernel, solid, params.height ?? null)\n\n  const draft = params.draftAngle ?? 0\n  const draftRad = (draft * Math.PI) / 180\n\n  // Punch inward = opposite the host face outward normal.\n  const n0 = kernel.surfaceNormal(host, 0, 0)\n  const nlen = Math.hypot(n0.x, n0.y, n0.z) || 1\n  const n = { x: n0.x / nlen, y: n0.y / nlen, z: n0.z / nlen }\n\n  // In-plane anchor via the host face's UV center.\n  const ub = kernel.uvBounds(host)\n  const uMid = (ub.uMin + ub.uMax) / 2\n  const vMid = (ub.vMin + ub.vMax) / 2\n  const anchor = kernel.pointOnSurface(host, uMid, vMid)\n\n  const bounds = ub\n  let result = solid\n  for (const contour of params.contours) {\n    const curves = contour.segments.map((s) => profileSegToCurve(s as never))\n    const uv = makeUvMap(mode, curves2dBounds(curves), bounds)\n    const mouth = buildPolygon3d(kernel, host, uv, anchor, n, contour)\n    if (mouth.length < 3) throw new Error('punchHole: contour is degenerate (fewer than 3 distinct points)')\n\n    // Mouth wire on the host plane.\n    const mouthEdges = [] as BrepHandle[]\n    for (let i = 0; i < mouth.length; i++) {\n      const a = mouth[i]!\n      const b = mouth[(i + 1) % mouth.length]!\n      mouthEdges.push(kernel.makeLineEdge(a, b) as never)\n    }\n\n    let punch: BrepHandle\n    if (draft !== 0) {\n      // Drafted hole = a tapered frustum: the mouth wire at the host plane and an\n      // end wire (recessed by `depth*tan(draftAngle)` toward the contour centre)\n      // at the punch depth, lofted together via occt. Verified: occt `loft` of two\n      // parallel-planar rect wires reproduces the analytic frustum volume exactly.\n      const inset = depth * Math.tan(draftRad)\n      // Uniform wall recess: each wall recedes by `inset` = depth·tan(draftAngle)\n      // measured *perpendicular* to that wall. For a homothetic scale about the\n      // centroid by factor s, the perpendicular recess of an edge at distance h\n      // from the centroid is h·(1−s); so choose s = 1 − inset/h̄ with h̄ the mean\n      // centroid→edge distance (h̄ = the half-side for a square/rect ⇒ walls land\n      // at exactly draftAngle).\n      const cx = mouth.reduce((s, p) => s + p.x, 0) / mouth.length\n      const cy = mouth.reduce((s, p) => s + p.y, 0) / mouth.length\n      const cz = mouth.reduce((s, p) => s + p.z, 0) / mouth.length\n      let edgeSum = 0\n      for (let i = 0; i < mouth.length; i++) {\n        const a = mouth[i]!\n        const b = mouth[(i + 1) % mouth.length]!\n        // centroid → edge midpoint projection in the host plane\n        const mx = (a.x + b.x) / 2 - cx\n        const my = (a.y + b.y) / 2 - cy\n        const mz = (a.z + b.z) / 2 - cz\n        edgeSum += Math.hypot(mx, my, mz)\n      }\n      const hBar = edgeSum / mouth.length\n      if (!Number.isFinite(hBar) || hBar <= 1e-9 || inset >= hBar * 0.999) {\n        throw new Error(\n          `E_PUNCH_DRAFT_OVER_TAPER: draftAngle ${draft}° inset ${inset.toFixed(3)} must be < half-width ${hBar.toFixed(3)} at depth ${depth}`,\n        )\n      }\n      const s = 1 - inset / hBar\n      const endPoints = mouth.map((p) => ({\n        x: cx + (p.x - cx) * s - n.x * depth,\n        y: cy + (p.y - cy) * s - n.y * depth,\n        z: cz + (p.z - cz) * s - n.z * depth,\n      }))\n      const endEdges = endPoints.map((p, i) => {\n        const a = endPoints[i]!\n        const b = endPoints[(i + 1) % endPoints.length]!\n        return kernel.makeLineEdge(a, b) as never\n      }) as BrepHandle[]\n      const k = getOcctKernel()\n      punch = k.loft(\n        [kernel.makeWire(mouthEdges), kernel.makeWire(endEdges)] as unknown as never[],\n        true,\n        true,\n      ) as unknown as BrepHandle\n    } else {\n      const prismFace = kernel.makeFace(kernel.makeWire(mouthEdges))\n      punch = kernel.extrude(prismFace, -n.x * depth, -n.y * depth, -n.z * depth)\n    }\n    try {\n      result = kernel.cut(result, punch)\n    } finally {\n      kernel.release(punch)\n    }\n  }\n  return result\n}\n\n/**\n * Build a Shape: the host solid with the profile(s) punched out of `params.on`.\n * @param kernel - the BREP engine surface.\n * @param params - the punch parameters.\n * @returns the holed Shape.\n */\nexport function buildPunchHole(kernel: BrepEngineApi, params: PunchHoleParams): Shape {\n  const solid = brepOf(params.on) as BrepHandle | undefined\n  if (!solid) {\n    throw new TopoRefError('E_TOPO_MESH_UNSUPPORTED', 'face', 'punchHole: target `on` has no BREP solid')\n  }\n  const holed = punchSolidOf(kernel, solid, params)\n  return fromBrep(solidToShape(kernel, holed), { solid: holed })\n}\n\n/**\n * `cad.punchHole`: cut a face-placed 2D profile out of a solid.\n * @group 创建\n * @inputs 1\n * @async false\n * @qual ok\n * @name punchHole\n * @returns Shape with the profile punched out of `on`.\n * @param params.contours - ordered 2D closed contours (the hole profile).type:any[] required:true\n * @param params.on - the target solid to punch.type:Shape required:true\n * @param params.face - host face: 1-based ordinal or `cad.faceRef(on, n)`.type:any required:true\n * @param params.height - blind depth along the face inward normal (null/absent = through).type:number|object required:false\n * @param params.draftAngle - wall taper in degrees (default 0 = straight; built as an occt loft frustum).type:number required:false\n * @param params.scaleMode - UV mapping: 'original' | 'bounds' | 'native'.type:string required:false\n */\nexport const punchHole = defineOp({\n  capabilities: ['directEdit'],\n  engines: ['occt'],\n  brep(params: Record<string, unknown>) {\n    assertProfileParams(params)\n    return buildPunchHole(getBrepApi(), params as unknown as PunchHoleParams)\n  },\n  naming: { kind: 'construct', newFaces: { via: 'explicit', vocab: [] } } as Provenance,\n})"]}
+{"version":3,"file":"punch-hole.js","sourceRoot":"","sources":["../../src/api/punch-hole.ts"],"names":[],"mappings":"AAyBA,OAAO,EAAE,UAAU,EAAE,MAAM,uBAAuB,CAAA;AAClD,OAAO,EAAE,YAAY,EAAE,MAAM,kBAAkB,CAAA;AAC/C,OAAO,EAAE,QAAQ,EAAE,MAAM,EAAE,MAAM,UAAU,CAAA;AAC3C,OAAO,EAAE,aAAa,EAAE,MAAM,2BAA2B,CAAA;AACzD,OAAO,EAAE,QAAQ,EAAE,MAAM,QAAQ,CAAA;AAEjC,OAAO,EAAE,YAAY,EAAE,MAAM,oBAAoB,CAAA;AACjD,OAAO,EAAE,iBAAiB,EAAqB,MAAM,kBAAkB,CAAA;AACvE,OAAO,EAAE,SAAS,EAAE,cAAc,EAAc,MAAM,iCAAiC,CAAA;AACvF,OAAO,EAAE,eAAe,EAAE,MAAM,uBAAuB,CAAA;AACvD,OAAO,EAAE,iBAAiB,EAAE,MAAM,qBAAqB,CAAA;AACvD,OAAO,EAAE,mBAAmB,EAAoB,MAAM,WAAW,CAAA;AAkBjE,oFAAoF;AACpF,MAAM,cAAc,GAAG,EAAE,CAAA;AAEzB;;;;;;;GAOG;AACH,SAAS,UAAU,CAAC,MAAqB,EAAE,KAAiB,EAAE,MAAiC;IAC7F,IAAI,MAAM,KAAK,IAAI,IAAI,MAAM,KAAK,SAAS;QAAE,OAAO,MAAM,CAAA;IAC1D,MAAM,GAAG,GAAG,MAAM,CAAC,cAAc,CAAC,KAAK,CAAC,CAAA;IACxC,MAAM,IAAI,GAAG,IAAI,CAAC,KAAK,CAAC,GAAG,CAAC,IAAI,GAAG,GAAG,CAAC,IAAI,EAAE,GAAG,CAAC,IAAI,GAAG,GAAG,CAAC,IAAI,EAAE,GAAG,CAAC,IAAI,GAAG,GAAG,CAAC,IAAI,CAAC,CAAA;IACtF,OAAO,IAAI,GAAG,cAAc,CAAA;AAC9B,CAAC;AAED;;;;;;;;;;;;;;;GAeG;AACH,SAAS,cAAc,CACrB,MAAqB,EACrB,IAAgB,EAChB,EAAS,EACT,MAA2C,EAC3C,CAAsC,EACtC,OAAoB;IAEpB,MAAM,GAAG,GAA0C,EAAE,CAAA;IACrD,4DAA4D;IAC5D,MAAM,IAAI,GAAG,CAAC,CAAsC,EAAE,EAAE;QACtD,MAAM,IAAI,GAAG,GAAG,CAAC,GAAG,CAAC,MAAM,GAAG,CAAC,CAAC,CAAA;QAChC,IAAI,IAAI,IAAI,IAAI,CAAC,GAAG,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,IAAI,IAAI,IAAI,CAAC,GAAG,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,IAAI,IAAI,IAAI,CAAC,GAAG,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,IAAI;YAAE,OAAM;QACnH,GAAG,CAAC,IAAI,CAAC,CAAC,CAAC,CAAA;IACb,CAAC,CAAA;IACD,KAAK,MAAM,GAAG,IAAI,OAAO,CAAC,QAAQ,EAAE,CAAC;QACnC,MAAM,CAAC,GAAG,iBAAiB,CAAC,GAAY,CAAC,CAAA;QACzC,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,IAAI,EAAE,EAAE,CAAC,EAAE,EAAE,CAAC;YAC7B,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,eAAe,CAAC,CAAC,EAAE,CAAC,GAAG,EAAE,CAAC,CAAA;YACzC,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,EAAE,CAAC,CAAC,CAAA;YACvB,MAAM,GAAG,GAAG,MAAM,CAAC,cAAc,CAAC,IAAI,EAAE,CAAC,EAAE,CAAC,CAAC,CAAA;YAC7C,mFAAmF;YACnF,MAAM,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,GAAG,MAAM,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,GAAG,MAAM,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,GAAG,MAAM,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAA;YACxF,IAAI,CAAC,EAAE,CAAC,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,CAAA;QACtE,CAAC;IACH,CAAC;IACD,4DAA4D;IAC5D,IAAI,GAAG,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QACnB,MAAM,CAAC,GAAG,GAAG,CAAC,CAAC,CAAE,CAAA;QACjB,MAAM,CAAC,GAAG,GAAG,CAAC,GAAG,CAAC,MAAM,GAAG,CAAC,CAAE,CAAA;QAC9B,IAAI,IAAI,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,IAAI,IAAI,IAAI,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,IAAI,IAAI,IAAI,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,IAAI;YAAE,GAAG,CAAC,GAAG,EAAE,CAAA;IACvG,CAAC;IACD,OAAO,GAAG,CAAA;AACZ,CAAC;AAED;;;;;;;GAOG;AACH,MAAM,UAAU,YAAY,CAAC,MAAqB,EAAE,KAAiB,EAAE,MAAuB;IAC5F,MAAM,IAAI,GAAG,iBAAiB,CAAC,MAAM,EAAE,MAAM,CAAC,EAAE,EAAE,MAAM,CAAC,IAAI,CAAC,CAAA;IAC9D,MAAM,IAAI,GAAG,MAAM,CAAC,SAAS,IAAI,UAAU,CAAA;IAC3C,MAAM,KAAK,GAAG,UAAU,CAAC,MAAM,EAAE,KAAK,EAAE,MAAM,CAAC,MAAM,IAAI,IAAI,CAAC,CAAA;IAE9D,MAAM,KAAK,GAAG,MAAM,CAAC,UAAU,IAAI,CAAC,CAAA;IACpC,MAAM,QAAQ,GAAG,CAAC,KAAK,GAAG,IAAI,CAAC,EAAE,CAAC,GAAG,GAAG,CAAA;IAExC,wDAAwD;IACxD,MAAM,EAAE,GAAG,MAAM,CAAC,aAAa,CAAC,IAAI,EAAE,CAAC,EAAE,CAAC,CAAC,CAAA;IAC3C,MAAM,IAAI,GAAG,IAAI,CAAC,KAAK,CAAC,EAAE,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAA;IAC9C,MAAM,CAAC,GAAG,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,IAAI,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,IAAI,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,IAAI,EAAE,CAAA;IAE5D,iDAAiD;IACjD,MAAM,EAAE,GAAG,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC,CAAA;IAChC,MAAM,IAAI,GAAG,CAAC,EAAE,CAAC,IAAI,GAAG,EAAE,CAAC,IAAI,CAAC,GAAG,CAAC,CAAA;IACpC,MAAM,IAAI,GAAG,CAAC,EAAE,CAAC,IAAI,GAAG,EAAE,CAAC,IAAI,CAAC,GAAG,CAAC,CAAA;IACpC,MAAM,MAAM,GAAG,MAAM,CAAC,cAAc,CAAC,IAAI,EAAE,IAAI,EAAE,IAAI,CAAC,CAAA;IAEtD,MAAM,MAAM,GAAG,EAAE,CAAA;IACjB,IAAI,MAAM,GAAG,KAAK,CAAA;IAClB,KAAK,MAAM,OAAO,IAAI,MAAM,CAAC,QAAQ,EAAE,CAAC;QACtC,MAAM,MAAM,GAAG,OAAO,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,iBAAiB,CAAC,CAAU,CAAC,CAAC,CAAA;QACzE,MAAM,EAAE,GAAG,SAAS,CAAC,IAAI,EAAE,cAAc,CAAC,MAAM,CAAC,EAAE,MAAM,CAAC,CAAA;QAC1D,MAAM,KAAK,GAAG,cAAc,CAAC,MAAM,EAAE,IAAI,EAAE,EAAE,EAAE,MAAM,EAAE,CAAC,EAAE,OAAO,CAAC,CAAA;QAClE,IAAI,KAAK,CAAC,MAAM,GAAG,CAAC;YAAE,MAAM,IAAI,KAAK,CAAC,iEAAiE,CAAC,CAAA;QAExG,gCAAgC;QAChC,MAAM,UAAU,GAAG,EAAkB,CAAA;QACrC,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,KAAK,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;YACtC,MAAM,CAAC,GAAG,KAAK,CAAC,CAAC,CAAE,CAAA;YACnB,MAAM,CAAC,GAAG,KAAK,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,KAAK,CAAC,MAAM,CAAE,CAAA;YACxC,UAAU,CAAC,IAAI,CAAC,MAAM,CAAC,YAAY,CAAC,CAAC,EAAE,CAAC,CAAU,CAAC,CAAA;QACrD,CAAC;QAED,IAAI,KAAiB,CAAA;QACrB,IAAI,KAAK,KAAK,CAAC,EAAE,CAAC;YAChB,4EAA4E;YAC5E,2EAA2E;YAC3E,6EAA6E;YAC7E,6EAA6E;YAC7E,MAAM,KAAK,GAAG,KAAK,GAAG,IAAI,CAAC,GAAG,CAAC,QAAQ,CAAC,CAAA;YACxC,4EAA4E;YAC5E,0EAA0E;YAC1E,0EAA0E;YAC1E,4EAA4E;YAC5E,4EAA4E;YAC5E,0BAA0B;YAC1B,MAAM,EAAE,GAAG,KAAK,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,KAAK,CAAC,MAAM,CAAA;YAC5D,MAAM,EAAE,GAAG,KAAK,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,KAAK,CAAC,MAAM,CAAA;YAC5D,MAAM,EAAE,GAAG,KAAK,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,KAAK,CAAC,MAAM,CAAA;YAC5D,IAAI,OAAO,GAAG,CAAC,CAAA;YACf,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,KAAK,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;gBACtC,MAAM,CAAC,GAAG,KAAK,CAAC,CAAC,CAAE,CAAA;gBACnB,MAAM,CAAC,GAAG,KAAK,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,KAAK,CAAC,MAAM,CAAE,CAAA;gBACxC,wDAAwD;gBACxD,MAAM,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,GAAG,EAAE,CAAA;gBAC/B,MAAM,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,GAAG,EAAE,CAAA;gBAC/B,MAAM,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,GAAG,EAAE,CAAA;gBAC/B,OAAO,IAAI,IAAI,CAAC,KAAK,CAAC,EAAE,EAAE,EAAE,EAAE,EAAE,CAAC,CAAA;YACnC,CAAC;YACD,MAAM,IAAI,GAAG,OAAO,GAAG,KAAK,CAAC,MAAM,CAAA;YACnC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC,IAAI,IAAI,IAAI,IAAI,IAAI,KAAK,IAAI,IAAI,GAAG,KAAK,EAAE,CAAC;gBACpE,MAAM,IAAI,KAAK,CACb,wCAAwC,KAAK,WAAW,KAAK,CAAC,OAAO,CAAC,CAAC,CAAC,yBAAyB,IAAI,CAAC,OAAO,CAAC,CAAC,CAAC,aAAa,KAAK,EAAE,CACrI,CAAA;YACH,CAAC;YACD,MAAM,CAAC,GAAG,CAAC,GAAG,KAAK,GAAG,IAAI,CAAA;YAC1B,MAAM,SAAS,GAAG,KAAK,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC;gBAClC,CAAC,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,KAAK;gBACpC,CAAC,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,KAAK;gBACpC,CAAC,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC,GAAG,KAAK;aACrC,CAAC,CAAC,CAAA;YACH,MAAM,QAAQ,GAAG,SAAS,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE;gBACtC,MAAM,CAAC,GAAG,SAAS,CAAC,CAAC,CAAE,CAAA;gBACvB,MAAM,CAAC,GAAG,SAAS,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,SAAS,CAAC,MAAM,CAAE,CAAA;gBAChD,OAAO,MAAM,CAAC,YAAY,CAAC,CAAC,EAAE,CAAC,CAAU,CAAA;YAC3C,CAAC,CAAiB,CAAA;YAClB,MAAM,CAAC,GAAG,aAAa,EAAE,CAAA;YACzB,KAAK,GAAG,CAAC,CAAC,IAAI,CACZ,CAAC,MAAM,CAAC,QAAQ,CAAC,UAAU,CAAC,EAAE,MAAM,CAAC,QAAQ,CAAC,QAAQ,CAAC,CAAuB,EAC9E,IAAI,EACJ,IAAI,CACoB,CAAA;QAC5B,CAAC;aAAM,CAAC;YACN,MAAM,SAAS,GAAG,MAAM,CAAC,QAAQ,CAAC,MAAM,CAAC,QAAQ,CAAC,UAAU,CAAC,CAAC,CAAA;YAC9D,KAAK,GAAG,MAAM,CAAC,OAAO,CAAC,SAAS,EAAE,CAAC,CAAC,CAAC,CAAC,GAAG,KAAK,EAAE,CAAC,CAAC,CAAC,CAAC,GAAG,KAAK,EAAE,CAAC,CAAC,CAAC,CAAC,GAAG,KAAK,CAAC,CAAA;QAC7E,CAAC;QACD,IAAI,CAAC;YACH,MAAM,GAAG,MAAM,CAAC,GAAG,CAAC,MAAM,EAAE,KAAK,CAAC,CAAA;QACpC,CAAC;gBAAS,CAAC;YACT,MAAM,CAAC,OAAO,CAAC,KAAK,CAAC,CAAA;QACvB,CAAC;IACH,CAAC;IACD,OAAO,MAAM,CAAA;AACf,CAAC;AAED;;;;;GAKG;AACH,MAAM,UAAU,cAAc,CAAC,MAAqB,EAAE,MAAuB;IAC3E,MAAM,KAAK,GAAG,MAAM,CAAC,MAAM,CAAC,EAAE,CAA2B,CAAA;IACzD,IAAI,CAAC,KAAK,EAAE,CAAC;QACX,MAAM,IAAI,YAAY,CAAC,yBAAyB,EAAE,MAAM,EAAE,0CAA0C,CAAC,CAAA;IACvG,CAAC;IACD,MAAM,KAAK,GAAG,YAAY,CAAC,MAAM,EAAE,KAAK,EAAE,MAAM,CAAC,CAAA;IACjD,OAAO,QAAQ,CAAC,YAAY,CAAC,MAAM,EAAE,KAAK,CAAC,EAAE,EAAE,KAAK,EAAE,KAAK,EAAE,CAAC,CAAA;AAChE,CAAC;AAED;;;;;;;;;;;;;;GAcG;AACH,MAAM,CAAC,MAAM,SAAS,GAAG,QAAQ,CAAC;IAChC,OAAO,EAAE,CAAC,MAAM,CAAC;IACjB,IAAI,CAAC,MAA+B;QAClC,mBAAmB,CAAC,MAAM,CAAC,CAAA;QAC3B,OAAO,cAAc,CAAC,UAAU,EAAE,EAAE,MAAoC,CAAC,CAAA;IAC3E,CAAC;IACD,MAAM,EAAE,EAAE,IAAI,EAAE,WAAW,EAAE,QAAQ,EAAE,EAAE,GAAG,EAAE,UAAU,EAAE,KAAK,EAAE,EAAE,EAAE,EAAgB;CACtF,CAAC,CAAA","sourcesContent":["/**\n * @platform occt — 本文件 import occt-kernel（getOcctKernel：draft-angle punch\n * 的 frustum loft 走原生 occt `loft`，适配器层无此能力）。\n *\n * `cad.punchHole`: cut a face-placed 2D profile out of a solid (E4 pocket/through\n * hole with optional taper).\n *\n * The hole profile is a set of closed 2D contours placed on a target face of the\n * solid (the same placement step as `cad.sketchOnFace`). Each placed contour is\n * extruded from the face *into* the part along the face inward normal, and the\n * resulting prism is the \"punch\" tool; a Boolean `cut` removes it from the host —\n * a profile-based pocket (`height` given) or through-hole (`height: null`).\n *\n * v1 scope: the punch is a straight linear prism, or — when `draftAngle > 0` — a\n * **tapered frustum** whose walls recede by `draftAngle` over the punch depth\n * (built as an occt `loft` between a mouth wire in the host plane and an inset\n * end wire at depth `depth·tan(draftAngle)`). The op is a composition over the\n * E3 on-surface placement + `kernel.extrude`/occt `loft` + `kernel.cut` and\n * declares `engines: ['occt']` (surface sampling + Boolean cut + draft loft need\n * the BREP platform).\n * @module\n */\nimport type { Shape } from '../mesh/types'\nimport type { BrepEngineApi } from '../brep/engine/primitives'\nimport type { BrepHandle } from '../brep/engine/types'\nimport { getBrepApi } from '../brep/handle-bridge'\nimport { solidToShape } from '../brep/brep-ops'\nimport { fromBrep, brepOf } from '../shape'\nimport { getOcctKernel } from '../occt-kernel/occtKernel'\nimport { defineOp } from '../sdk'\nimport type { Provenance } from '../topology/naming/lineage'\nimport { TopoRefError } from '../topology/naming'\nimport { resolveFaceHandle, type FaceSelector } from './sketch-on-face'\nimport { makeUvMap, curves2dBounds, type UvMap } from '../geometry2d/bridge/on-surface'\nimport { evaluateCurve2d } from '../geometry2d/curve2d'\nimport { profileSegToCurve } from '../geometry2d/adapt'\nimport { assertProfileParams, type ProfileLoop } from './profile'\n\n/** Parameters for `cad.punchHole`. */\nexport interface PunchHoleParams {\n  /** Ordered 2D closed contour(s) describing the hole profile (same shape as `cad.profile`). */\n  contours: ProfileLoop[]\n  /** The target solid on which the hole is punched. */\n  on: Shape\n  /** The host face: a 1-based ordinal or a `cad.faceRef(on, n)` result. */\n  face: FaceSelector\n  /** Removal depth along the face inward normal. `null`/absent = through hole. */\n  height?: number | null\n  /** Taper on the hole walls (degrees; default 0 = straight wall). Built as a frustum via occt loft. */\n  draftAngle?: number\n  /** UV mapping mode for contour placement (default `'original'`). */\n  scaleMode?: 'original' | 'bounds' | 'native'\n}\n\n/** Extra length past the host extent so a through-hole clears the opposite side. */\nconst THROUGH_MARGIN = 10\n\n/**\n * Depth of the punch extrusion: the explicit `height`, or the host's bounding-box\n * diagonal (+ margin) for a through hole.\n * @param kernel - the BREP engine surface.\n * @param solid - the host solid handle.\n * @param height - the blind depth, or null for through.\n * @returns the positive extrude length.\n */\nfunction punchDepth(kernel: BrepEngineApi, solid: BrepHandle, height: number | null | undefined): number {\n  if (height !== null && height !== undefined) return height\n  const box = kernel.getBoundingBox(solid)\n  const diag = Math.hypot(box.xmax - box.xmin, box.ymax - box.ymin, box.zmax - box.zmin)\n  return diag + THROUGH_MARGIN\n}\n\n/**\n * Map a contour's sampled 2D points onto the host face's UV space, evaluate the\n * surface there, and return a clean, coplanar polygon (sample points projected\n * onto the host's plane through its normal). Rebuilding a straight-edged planar\n * face is deliberate: extruding the on-surface bridge's wire-derived face (a\n * near-coplanar shell, z varies by ~1e-7) collapses its OCCT volume to ~0 — see\n * GOTCHA `punch-hole` (E4).\n * @param kernel - the BREP engine surface.\n * @param host - the host face handle.\n * @param mode - the face scale mode.\n * @param uv - the UV mapping for this contour.\n * @param anchor - an in-plane point of the host face (for the projection plane).\n * @param n - the host face outward normal (unit).\n * @param contour - the 2D contour to punch.\n * @returns a flat polygon of 3D points (each approximately in the host plane).\n */\nfunction buildPolygon3d(\n  kernel: BrepEngineApi,\n  host: BrepHandle,\n  uv: UvMap,\n  anchor: { x: number; y: number; z: number },\n  n: { x: number; y: number; z: number },\n  contour: ProfileLoop,\n): { x: number; y: number; z: number }[] {\n  const pts: { x: number; y: number; z: number }[] = []\n  // Dedupe consecutive coincident samples across the contour.\n  const push = (p: { x: number; y: number; z: number }) => {\n    const last = pts[pts.length - 1]\n    if (last && Math.abs(last.x - p.x) < 1e-7 && Math.abs(last.y - p.y) < 1e-7 && Math.abs(last.z - p.z) < 1e-7) return\n    pts.push(p)\n  }\n  for (const seg of contour.segments) {\n    const c = profileSegToCurve(seg as never)\n    for (let k = 0; k <= 12; k++) {\n      const [x, y] = evaluateCurve2d(c, k / 12)\n      const [u, v] = uv(x, y)\n      const raw = kernel.pointOnSurface(host, u, v)\n      // Project onto the host face plane (through `anchor` + `n`) for exact coplanarity.\n      const d = (raw.x - anchor.x) * n.x + (raw.y - anchor.y) * n.y + (raw.z - anchor.z) * n.z\n      push({ x: raw.x - n.x * d, y: raw.y - n.y * d, z: raw.z - n.z * d })\n    }\n  }\n  // Close the loop: drop a trailing point equal to the first.\n  if (pts.length > 1) {\n    const a = pts[0]!\n    const b = pts[pts.length - 1]!\n    if (Math.abs(a.x - b.x) < 1e-7 && Math.abs(a.y - b.y) < 1e-7 && Math.abs(a.z - b.z) < 1e-7) pts.pop()\n  }\n  return pts\n}\n\n/**\n * Build and cut the punch solid for every placed profile on the host face and\n * Boolean-cut it from `solid`, returning the holed solid handle.\n * @param kernel - the BREP engine surface.\n * @param solid - the host solid handle.\n * @param params - the punch parameters.\n * @returns the holed solid handle.\n */\nexport function punchSolidOf(kernel: BrepEngineApi, solid: BrepHandle, params: PunchHoleParams): BrepHandle {\n  const host = resolveFaceHandle(kernel, params.on, params.face)\n  const mode = params.scaleMode ?? 'original'\n  const depth = punchDepth(kernel, solid, params.height ?? null)\n\n  const draft = params.draftAngle ?? 0\n  const draftRad = (draft * Math.PI) / 180\n\n  // Punch inward = opposite the host face outward normal.\n  const n0 = kernel.surfaceNormal(host, 0, 0)\n  const nlen = Math.hypot(n0.x, n0.y, n0.z) || 1\n  const n = { x: n0.x / nlen, y: n0.y / nlen, z: n0.z / nlen }\n\n  // In-plane anchor via the host face's UV center.\n  const ub = kernel.uvBounds(host)\n  const uMid = (ub.uMin + ub.uMax) / 2\n  const vMid = (ub.vMin + ub.vMax) / 2\n  const anchor = kernel.pointOnSurface(host, uMid, vMid)\n\n  const bounds = ub\n  let result = solid\n  for (const contour of params.contours) {\n    const curves = contour.segments.map((s) => profileSegToCurve(s as never))\n    const uv = makeUvMap(mode, curves2dBounds(curves), bounds)\n    const mouth = buildPolygon3d(kernel, host, uv, anchor, n, contour)\n    if (mouth.length < 3) throw new Error('punchHole: contour is degenerate (fewer than 3 distinct points)')\n\n    // Mouth wire on the host plane.\n    const mouthEdges = [] as BrepHandle[]\n    for (let i = 0; i < mouth.length; i++) {\n      const a = mouth[i]!\n      const b = mouth[(i + 1) % mouth.length]!\n      mouthEdges.push(kernel.makeLineEdge(a, b) as never)\n    }\n\n    let punch: BrepHandle\n    if (draft !== 0) {\n      // Drafted hole = a tapered frustum: the mouth wire at the host plane and an\n      // end wire (recessed by `depth*tan(draftAngle)` toward the contour centre)\n      // at the punch depth, lofted together via occt. Verified: occt `loft` of two\n      // parallel-planar rect wires reproduces the analytic frustum volume exactly.\n      const inset = depth * Math.tan(draftRad)\n      // Uniform wall recess: each wall recedes by `inset` = depth·tan(draftAngle)\n      // measured *perpendicular* to that wall. For a homothetic scale about the\n      // centroid by factor s, the perpendicular recess of an edge at distance h\n      // from the centroid is h·(1−s); so choose s = 1 − inset/h̄ with h̄ the mean\n      // centroid→edge distance (h̄ = the half-side for a square/rect ⇒ walls land\n      // at exactly draftAngle).\n      const cx = mouth.reduce((s, p) => s + p.x, 0) / mouth.length\n      const cy = mouth.reduce((s, p) => s + p.y, 0) / mouth.length\n      const cz = mouth.reduce((s, p) => s + p.z, 0) / mouth.length\n      let edgeSum = 0\n      for (let i = 0; i < mouth.length; i++) {\n        const a = mouth[i]!\n        const b = mouth[(i + 1) % mouth.length]!\n        // centroid → edge midpoint projection in the host plane\n        const mx = (a.x + b.x) / 2 - cx\n        const my = (a.y + b.y) / 2 - cy\n        const mz = (a.z + b.z) / 2 - cz\n        edgeSum += Math.hypot(mx, my, mz)\n      }\n      const hBar = edgeSum / mouth.length\n      if (!Number.isFinite(hBar) || hBar <= 1e-9 || inset >= hBar * 0.999) {\n        throw new Error(\n          `E_PUNCH_DRAFT_OVER_TAPER: draftAngle ${draft}° inset ${inset.toFixed(3)} must be < half-width ${hBar.toFixed(3)} at depth ${depth}`,\n        )\n      }\n      const s = 1 - inset / hBar\n      const endPoints = mouth.map((p) => ({\n        x: cx + (p.x - cx) * s - n.x * depth,\n        y: cy + (p.y - cy) * s - n.y * depth,\n        z: cz + (p.z - cz) * s - n.z * depth,\n      }))\n      const endEdges = endPoints.map((p, i) => {\n        const a = endPoints[i]!\n        const b = endPoints[(i + 1) % endPoints.length]!\n        return kernel.makeLineEdge(a, b) as never\n      }) as BrepHandle[]\n      const k = getOcctKernel()\n      punch = k.loft(\n        [kernel.makeWire(mouthEdges), kernel.makeWire(endEdges)] as unknown as never[],\n        true,\n        true,\n      ) as unknown as BrepHandle\n    } else {\n      const prismFace = kernel.makeFace(kernel.makeWire(mouthEdges))\n      punch = kernel.extrude(prismFace, -n.x * depth, -n.y * depth, -n.z * depth)\n    }\n    try {\n      result = kernel.cut(result, punch)\n    } finally {\n      kernel.release(punch)\n    }\n  }\n  return result\n}\n\n/**\n * Build a Shape: the host solid with the profile(s) punched out of `params.on`.\n * @param kernel - the BREP engine surface.\n * @param params - the punch parameters.\n * @returns the holed Shape.\n */\nexport function buildPunchHole(kernel: BrepEngineApi, params: PunchHoleParams): Shape {\n  const solid = brepOf(params.on) as BrepHandle | undefined\n  if (!solid) {\n    throw new TopoRefError('E_TOPO_MESH_UNSUPPORTED', 'face', 'punchHole: target `on` has no BREP solid')\n  }\n  const holed = punchSolidOf(kernel, solid, params)\n  return fromBrep(solidToShape(kernel, holed), { solid: holed })\n}\n\n/**\n * `cad.punchHole`: cut a face-placed 2D profile out of a solid.\n * @group 创建\n * @inputs 1\n * @async false\n * @qual ok\n * @name punchHole\n * @returns Shape with the profile punched out of `on`.\n * @param params.contours - ordered 2D closed contours (the hole profile).type:any[] required:true\n * @param params.on - the target solid to punch.type:Shape required:true\n * @param params.face - host face: 1-based ordinal or `cad.faceRef(on, n)`.type:any required:true\n * @param params.height - blind depth along the face inward normal (null/absent = through).type:number|object required:false\n * @param params.draftAngle - wall taper in degrees (default 0 = straight; built as an occt loft frustum).type:number required:false\n * @param params.scaleMode - UV mapping: 'original' | 'bounds' | 'native'.type:string required:false\n */\nexport const punchHole = defineOp({\n  engines: ['occt'],\n  brep(params: Record<string, unknown>) {\n    assertProfileParams(params)\n    return buildPunchHole(getBrepApi(), params as unknown as PunchHoleParams)\n  },\n  naming: { kind: 'construct', newFaces: { via: 'explicit', vocab: [] } } as Provenance,\n})"]}

package/dist/api/replicate.d.ts

@@ -18,21 +18,19 @@
  *   also build `replica[*]/<inner>` role tables (same treatment as linearPattern,
  *   via the shared buildReplicaRoleTable helper).
  * - Single-copy ops (mirror / clone / transformCopy): thin overrides that keep
- *   the input and delegate to the generated compatOp (borrow/adopt/capabilities/
- *   naming preserved).
+ *   the input and delegate to the generated compatOp (adopt/engines/naming
+ *   preserved).
  *
  * The generated files stay untouched; overrides win via api-namespace spread
  * (same precedent as cut / split / linearPattern).
  *
  * 平台分层（narrowing plan Phase 5，D11）：
- * - mirrorJoin / mirror：平台 op（依赖 occt-only `mirrorWithHistory`）→
- *   `engines: ['occt']`，不声明 capabilities（能力由平台身份本身界定）。
- * - circularPattern / gridPattern / rectangularPattern / clone：中立 op（实现
- *   只用 L1 核心面）→ capabilities 收窄到真实 L1 名（删除 isNull/iterShapes/
- *   section/translateWithHistory 等 occt-only 虚名，capability-map 实证实现不依赖）。
+ * - mirrorJoin / mirror / circularPattern / gridPattern / rectangularPattern /
+ *   clone：中立 op（实现只用 L1 核心面）→ 无 engines、无能力声明；
+ *   面演化轨由 `hasNativeHistory` 在 mirrorBrep 内部按引擎事实静态分叉。
  */
 import type { Shape, Vec3 } from '../mesh/types.js';
-/** 镜像面参数（与 vendored MirrorOptions 同形；G5 去 brepjs 依赖后本地自持）。 */
+/** 镜像面参数（与旧 MirrorOptions 同形；G5 去外部依赖后本地自持）。 */
 interface MirrorOptions {
     /** 镜像面法向。默认 [0,0,1]。 */
     normal?: readonly [number, number, number] | {

package/dist/api/replicate.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"replicate.d.ts","sourceRoot":"","sources":["../../src/api/replicate.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GAgCG;AAEH,OAAO,KAAK,EAAE,KAAK,EAAE,IAAI,EAAE,MAAM,eAAe,CAAA;AAuBhD,8DAA8D;AAC9D,UAAU,aAAa;IACrB,wBAAwB;IACxB,MAAM,CAAC,EAAE,SAAS,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,GAAG;QAAE,CAAC,EAAE,MAAM,CAAC;QAAC,CAAC,EAAE,MAAM,CAAC;QAAC,CAAC,EAAE,MAAM,CAAA;KAAE,CAAA;IAChF,wBAAwB;IACxB,EAAE,CAAC,EAAE,SAAS,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,GAAG;QAAE,CAAC,EAAE,MAAM,CAAC;QAAC,CAAC,EAAE,MAAM,CAAC;QAAC,CAAC,EAAE,MAAM,CAAA;KAAE,CAAA;CAC7E;AAmED;;;;;;;;;;;;;;;;GAgBG;AACH,eAAO,MAAM,eAAe;;CAmD1B,CAAA;AAIF;;;;;;;;;;;;;;;;;;GAkBG;AACH,eAAO,MAAM,WAAW;;CAyFtB,CAAA;AAIF,UAAU,yBAAyB;IACjC,IAAI,EAAE,IAAI,CAAA;IACV,MAAM,EAAE,MAAM,CAAA;IACd,QAAQ,EAAE,MAAM,CAAA;IAChB,IAAI,EAAE,IAAI,CAAA;IACV,MAAM,EAAE,MAAM,CAAA;IACd,QAAQ,EAAE,MAAM,CAAA;CACjB;AAED;;;;;;;;;;;;;GAaG;AACH,eAAO,MAAM,kBAAkB;;CA8E7B,CAAA;AAIF,UAAU,iBAAiB;IACzB,MAAM,CAAC,EAAE,IAAI,CAAA;IACb,EAAE,CAAC,EAAE,IAAI,CAAA;CACV;AAED;;;;;;;;;;;;;GAaG;AACH,eAAO,MAAM,UAAU;;CAkDrB,CAAA;AAIF;;;;;;;;;;;;;GAaG;AACH,eAAO,MAAM,MAAM;;CAwBjB,CAAA;AAEF;;;;;;;;;;;;GAYG;AACH,eAAO,MAAM,KAAK;;CAmBhB,CAAA"}
+{"version":3,"file":"replicate.d.ts","sourceRoot":"","sources":["../../src/api/replicate.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GA8BG;AAEH,OAAO,KAAK,EAAE,KAAK,EAAE,IAAI,EAAE,MAAM,eAAe,CAAA;AAuBhD,gDAAgD;AAChD,UAAU,aAAa;IACrB,wBAAwB;IACxB,MAAM,CAAC,EAAE,SAAS,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,GAAG;QAAE,CAAC,EAAE,MAAM,CAAC;QAAC,CAAC,EAAE,MAAM,CAAC;QAAC,CAAC,EAAE,MAAM,CAAA;KAAE,CAAA;IAChF,wBAAwB;IACxB,EAAE,CAAC,EAAE,SAAS,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,GAAG;QAAE,CAAC,EAAE,MAAM,CAAC;QAAC,CAAC,EAAE,MAAM,CAAC;QAAC,CAAC,EAAE,MAAM,CAAA;KAAE,CAAA;CAC7E;AAmED;;;;;;;;;;;;;;;;GAgBG;AACH,eAAO,MAAM,eAAe;;CAwC1B,CAAA;AAIF;;;;;;;;;;;;;;;;;;GAkBG;AACH,eAAO,MAAM,WAAW;;CA+EtB,CAAA;AAGF,UAAU,yBAAyB;IACjC,IAAI,EAAE,IAAI,CAAA;IACV,MAAM,EAAE,MAAM,CAAA;IACd,QAAQ,EAAE,MAAM,CAAA;IAChB,IAAI,EAAE,IAAI,CAAA;IACV,MAAM,EAAE,MAAM,CAAA;IACd,QAAQ,EAAE,MAAM,CAAA;CACjB;AAED;;;;;;;;;;;;;GAaG;AACH,eAAO,MAAM,kBAAkB;;CAmE7B,CAAA;AAIF,UAAU,iBAAiB;IACzB,MAAM,CAAC,EAAE,IAAI,CAAA;IACb,EAAE,CAAC,EAAE,IAAI,CAAA;CACV;AAED;;;;;;;;;;;;;GAaG;AACH,eAAO,MAAM,UAAU;;CAgDrB,CAAA;AAIF;;;;;;;;;;;;;GAaG;AACH,eAAO,MAAM,MAAM;;CAsBjB,CAAA;AAEF;;;;;;;;;;;;GAYG;AACH,eAAO,MAAM,KAAK;;CAmBhB,CAAA"}