@faicad/faijs 0.13.0

package/dist/vendored/brepjs/operations/sweepFns.js

@@ -0,0 +1,438 @@
+/**
+ * Sweep operations — generic sweep, support extrude, complex extrude,
+ * twist extrude, multi-section sweep, and guided sweep.
+ *
+ * Consolidated from extrudeFns, multiSweepFns, and guidedSweepFns.
+ */
+var __addDisposableResource = (this && this.__addDisposableResource) || function (env, value, async) {
+    if (value !== null && value !== void 0) {
+        if (typeof value !== "object" && typeof value !== "function") throw new TypeError("Object expected.");
+        var dispose, inner;
+        if (async) {
+            if (!Symbol.asyncDispose) throw new TypeError("Symbol.asyncDispose is not defined.");
+            dispose = value[Symbol.asyncDispose];
+        }
+        if (dispose === void 0) {
+            if (!Symbol.dispose) throw new TypeError("Symbol.dispose is not defined.");
+            dispose = value[Symbol.dispose];
+            if (async) inner = dispose;
+        }
+        if (typeof dispose !== "function") throw new TypeError("Object not disposable.");
+        if (inner) dispose = function() { try { inner.call(this); } catch (e) { return Promise.reject(e); } };
+        env.stack.push({ value: value, dispose: dispose, async: async });
+    }
+    else if (async) {
+        env.stack.push({ async: true });
+    }
+    return value;
+};
+var __disposeResources = (this && this.__disposeResources) || (function (SuppressedError) {
+    return function (env) {
+        function fail(e) {
+            env.error = env.hasError ? new SuppressedError(e, env.error, "An error was suppressed during disposal.") : e;
+            env.hasError = true;
+        }
+        var r, s = 0;
+        function next() {
+            while (r = env.stack.pop()) {
+                try {
+                    if (!r.async && s === 1) return s = 0, env.stack.push(r), Promise.resolve().then(next);
+                    if (r.dispose) {
+                        var result = r.dispose.call(r.value);
+                        if (r.async) return s |= 2, Promise.resolve(result).then(next, function(e) { fail(e); return next(); });
+                    }
+                    else s |= 1;
+                }
+                catch (e) {
+                    fail(e);
+                }
+            }
+            if (s === 1) return env.hasError ? Promise.reject(env.error) : Promise.resolve();
+            if (env.hasError) throw env.error;
+        }
+        return next();
+    };
+})(typeof SuppressedError === "function" ? SuppressedError : function (error, suppressed, message) {
+    var e = new Error(message);
+    return e.name = "SuppressedError", e.error = error, e.suppressed = suppressed, e;
+});
+import { getKernel } from '../kernel/index.js';
+import { vecAdd, vecLength } from '../core/vecOps.js';
+import { castResultShape, disposeResultShape, isShape3D, isWire as isWireGuard, } from '../core/shapeTypes.js';
+import { ok, err, isErr } from '../core/result.js';
+import { validationError, kernelError, typeCastError, BrepErrorCode, } from '../core/errors.js';
+import { buildLawFromProfile } from './extrudeUtils.js';
+// ---------------------------------------------------------------------------
+// Internal: spine construction
+// ---------------------------------------------------------------------------
+/** Build a wire spine from start to end point (line segment). */
+function makeSpineWire(start, end) {
+    const kernel = getKernel();
+    const edge = kernel.makeLineEdge([...start], [...end]);
+    const wire = kernel.makeWire([edge]);
+    // The edge is consumed into the wire (shared refcounted TShape); `.delete()` is
+    // a no-op on arena kernels, so release its slot through kernel.dispose.
+    kernel.dispose(edge);
+    return castResultShape(wire);
+}
+/** Build a helix wire for twist extrusion. */
+function makeHelixWire(pitch, height, radius, center, dir, leftHanded = false) {
+    const kernel = getKernel();
+    return castResultShape(kernel.makeHelixWire(pitch, height, radius, [...center], [...dir], leftHanded));
+}
+// ---------------------------------------------------------------------------
+// Generic sweep
+// ---------------------------------------------------------------------------
+/** Cast a shell-mode sweep result `[shell, startWire, endWire]`, releasing all three on any reject. */
+function castSweepShellTuple(result) {
+    const shape = castResultShape(result.shape);
+    const startWire = castResultShape(result.firstShape);
+    const endWire = castResultShape(result.lastShape);
+    const disposeAll = () => {
+        disposeResultShape(shape);
+        disposeResultShape(startWire);
+        disposeResultShape(endWire);
+    };
+    if (!isShape3D(shape)) {
+        disposeAll();
+        return err(typeCastError('SWEEP_NOT_3D', 'Sweep did not produce a 3D shape'));
+    }
+    if (!isWireGuard(startWire)) {
+        disposeAll();
+        return err(typeCastError('SWEEP_START_NOT_WIRE', 'Sweep did not produce a start Wire'));
+    }
+    if (!isWireGuard(endWire)) {
+        disposeAll();
+        return err(typeCastError('SWEEP_END_NOT_WIRE', 'Sweep did not produce an end Wire'));
+    }
+    return ok([shape, startWire, endWire]);
+}
+/**
+ * Sweep a wire profile along a spine wire to create a 3D shape.
+ *
+ * Supports Frenet framing, auxiliary spine twist, scaling laws, contact
+ * detection, and configurable corner transition modes.
+ *
+ * @param wire - The profile wire to sweep (must be closed for solid output).
+ * @param spine - The path wire to sweep along.
+ * @param config - Sweep configuration (frenet, transition mode, scaling law, etc.).
+ * @param shellMode - When `true`, return `[shell, startWire, endWire]` instead of a solid.
+ * @returns `Result` containing either a solid or a `[Shape3D, Wire, Wire]` tuple in shell mode.
+ */
+export function sweep(wire, spine, config = {}, shellMode = false) {
+    // Fast path: simple pipe mode (BRepOffsetAPI_MakePipe)
+    if (config.mode === 'simple' && !shellMode) {
+        const kernel = getKernel();
+        const resultOc = kernel.simplePipe(wire.wrapped, spine.wrapped);
+        const shape = castResultShape(resultOc);
+        if (!isShape3D(shape)) {
+            disposeResultShape(shape);
+            return err(typeCastError('SWEEP_NOT_3D', 'Simple pipe did not produce a 3D shape'));
+        }
+        return ok(shape);
+    }
+    const { frenet = false, auxiliarySpine, law = null, transitionMode = 'right', withContact, support, forceProfileSpineOthogonality, tolerance, boundTolerance, angularTolerance, maxDegree, maxSegments, } = config;
+    const kernel = getKernel();
+    const withCorrection = transitionMode === 'round' ? true : !!forceProfileSpineOthogonality;
+    const result = kernel.sweepPipeShell(wire.wrapped, spine.wrapped, {
+        transitionMode,
+        contact: !!withContact,
+        correction: withCorrection,
+        frenet,
+        shellMode,
+        ...(auxiliarySpine?.wrapped ? { auxiliary: auxiliarySpine.wrapped } : {}),
+        ...(law !== null ? { law } : {}),
+        ...(support !== null ? { support } : {}),
+        tolerance,
+        boundTolerance,
+        angularTolerance,
+        maxDegree,
+        maxSegments,
+    });
+    if (shellMode && typeof result === 'object' && 'firstShape' in result) {
+        return castSweepShellTuple(result);
+    }
+    const shape = castResultShape(result);
+    if (!isShape3D(shape)) {
+        disposeResultShape(shape);
+        return err(typeCastError('SWEEP_NOT_3D', 'Sweep did not produce a 3D shape'));
+    }
+    return ok(shape);
+}
+// ---------------------------------------------------------------------------
+// Complex extrusions
+// ---------------------------------------------------------------------------
+/**
+ * Extrude a wire along a normal constrained to a support surface.
+ *
+ * Constructs a linear spine from `center` to `center + normal` and sweeps
+ * the profile wire along it, constrained by the support surface geometry.
+ *
+ * @param wire - The profile wire to sweep (must be closed).
+ * @param center - Start point of the extrusion spine.
+ * @param normal - Direction and length of the extrusion.
+ * @param support - kernel support surface that constrains the sweep.
+ * @returns `Result` containing the swept 3D shape.
+ */
+export function supportExtrude(wire, center, normal, support) {
+    const endPoint = vecAdd(center, normal);
+    const spine = makeSpineWire(center, endPoint);
+    return sweep(wire, spine, { support });
+}
+/**
+ * Extrude a wire along a normal with optional profile scaling.
+ *
+ * Builds a linear spine from `center` to `center + normal` and sweeps the
+ * profile wire. When `profileShape` is provided, a scaling law (s-curve or
+ * linear) modulates the cross-section size along the path.
+ *
+ * @param wire - The profile wire to sweep (must be closed).
+ * @param center - Start point of the extrusion spine.
+ * @param normal - Direction and length of the extrusion. Must be non-zero.
+ * @param profileShape - Optional scaling profile applied along the extrusion.
+ * @param shellMode - When `true`, return `[shell, startWire, endWire]` instead of a solid.
+ * @returns `Result` containing the extruded shape or a shell tuple.
+ */
+export function complexExtrude(wire, center, normal, profileShape, shellMode = false) {
+    const env_1 = { stack: [], error: void 0, hasError: false };
+    try {
+        const extrusionLength = vecLength(normal);
+        if (extrusionLength < 1e-10) {
+            return err(validationError('ZERO_LENGTH_EXTRUSION', 'Extrusion vector cannot have zero length'));
+        }
+        const endPoint = vecAdd(center, normal);
+        // sweep is immutable and does not consume the spine — dispose it on every exit.
+        const spine = __addDisposableResource(env_1, makeSpineWire(center, endPoint), false);
+        let law = null;
+        if (profileShape) {
+            const lawResult = buildLawFromProfile(extrusionLength, profileShape);
+            if (isErr(lawResult))
+                return lawResult;
+            law = lawResult.value;
+        }
+        return sweep(wire, spine, { law }, shellMode);
+    }
+    catch (e_1) {
+        env_1.error = e_1;
+        env_1.hasError = true;
+    }
+    finally {
+        __disposeResources(env_1);
+    }
+}
+/**
+ * Extrude a wire along a normal with helical twist and optional profile scaling.
+ *
+ * Constructs a helical auxiliary spine that rotates the profile by
+ * `angleDegrees` over the extrusion length. Combines twist with optional
+ * s-curve or linear scaling when `profileShape` is provided.
+ *
+ * @param wire - The profile wire to sweep (must be closed).
+ * @param angleDegrees - Total twist rotation in degrees. Must be non-zero.
+ * @param center - Start point of the extrusion spine.
+ * @param normal - Direction and length of the extrusion. Must be non-zero.
+ * @param profileShape - Optional scaling profile applied along the extrusion.
+ * @param shellMode - When `true`, return `[shell, startWire, endWire]` instead of a solid.
+ * @returns `Result` containing the twisted extruded shape or a shell tuple.
+ */
+export function twistExtrude(wire, angleDegrees, center, normal, profileShape, shellMode = false) {
+    const env_2 = { stack: [], error: void 0, hasError: false };
+    try {
+        if (Math.abs(angleDegrees) < 1e-10) {
+            return err(validationError('ZERO_TWIST_ANGLE', 'Twist angle cannot be zero'));
+        }
+        const extrusionLength = vecLength(normal);
+        if (extrusionLength < 1e-10) {
+            return err(validationError('ZERO_LENGTH_EXTRUSION', 'Extrusion vector cannot have zero length'));
+        }
+        const endPoint = vecAdd(center, normal);
+        // sweep is immutable and consumes neither spine — dispose both on every exit.
+        const spine = __addDisposableResource(env_2, makeSpineWire(center, endPoint), false);
+        const leftHanded = angleDegrees < 0;
+        const pitch = (360.0 / Math.abs(angleDegrees)) * extrusionLength;
+        const auxiliarySpine = __addDisposableResource(env_2, makeHelixWire(pitch, extrusionLength, 1, center, normal, leftHanded), false);
+        let law = null;
+        if (profileShape) {
+            const lawResult = buildLawFromProfile(extrusionLength, profileShape);
+            if (isErr(lawResult))
+                return lawResult;
+            law = lawResult.value;
+        }
+        return sweep(wire, spine, { auxiliarySpine, law }, shellMode);
+    }
+    catch (e_2) {
+        env_2.error = e_2;
+        env_2.hasError = true;
+    }
+    finally {
+        __disposeResources(env_2);
+    }
+}
+// ---------------------------------------------------------------------------
+// Multi-section sweep — helpers
+// ---------------------------------------------------------------------------
+/** Validate that explicit section locations are in [0,1] and strictly increasing. */
+function validateSectionLocations(sections) {
+    const explicitLocations = sections.map((s) => s.location);
+    for (let i = 0; i < explicitLocations.length; i++) {
+        const loc = explicitLocations[i];
+        if (loc !== undefined && (loc < 0 || loc > 1)) {
+            return validationError(BrepErrorCode.MULTI_SWEEP_FAILED, `Section ${i} location ${loc} is out of range [0, 1]`);
+        }
+    }
+    const definedLocs = explicitLocations.filter((l) => l !== undefined);
+    for (let i = 1; i < definedLocs.length; i++) {
+        if ((definedLocs[i] ?? 0) <= (definedLocs[i - 1] ?? 0)) {
+            return validationError(BrepErrorCode.MULTI_SWEEP_FAILED, 'Section locations must be strictly increasing');
+        }
+    }
+    return undefined;
+}
+/** Compute spine parameters for each section given the spine's parameter range. */
+function computeSectionParams(sections, spine, kernel) {
+    const [uFirst, uLast] = kernel.curveParameters(spine.wrapped);
+    const uRange = uLast - uFirst;
+    // Build params: explicit locations override, gaps are linearly interpolated
+    // between the nearest explicit neighbors (or 0/1 at boundaries).
+    const params = new Array(sections.length);
+    // First pass: resolve explicit locations
+    for (let i = 0; i < sections.length; i++) {
+        const loc = sections[i]?.location;
+        params[i] = loc !== undefined ? uFirst + loc * uRange : Number.NaN;
+    }
+    // Second pass: interpolate gaps between explicit anchors
+    let prevIdx = -1;
+    let prevVal = uFirst; // implicit 0.0 at start
+    for (let i = 0; i <= sections.length; i++) {
+        const isEnd = i === sections.length;
+        const isExplicit = !isEnd && !Number.isNaN(params[i] ?? Number.NaN);
+        if (isExplicit || isEnd) {
+            const nextVal = isEnd ? uLast : (params[i] ?? uLast);
+            // Fill gap between prevIdx+1 and i-1
+            const gapCount = i - prevIdx - 1;
+            for (let g = 1; g <= gapCount; g++) {
+                params[prevIdx + g] = prevVal + (g / (gapCount + 1)) * (nextVal - prevVal);
+            }
+            if (!isEnd) {
+                prevIdx = i;
+                prevVal = params[i] ?? uFirst;
+            }
+        }
+    }
+    // Validate: final params must be strictly increasing
+    for (let i = 1; i < params.length; i++) {
+        if ((params[i] ?? 0) <= (params[i - 1] ?? 0)) {
+            return err(validationError(BrepErrorCode.MULTI_SWEEP_FAILED, `Computed section parameters are not strictly increasing at index ${i} ` +
+                `(${params[i - 1]?.toFixed(4)} >= ${params[i]?.toFixed(4)})`));
+        }
+    }
+    return ok(params);
+}
+// ---------------------------------------------------------------------------
+// Multi-section sweep
+// ---------------------------------------------------------------------------
+/**
+ * Sweep multiple profile sections along a spine wire.
+ *
+ * Each section wire is positioned at a point along the spine (either at an
+ * explicit `location` parameter or auto-distributed evenly). The profiles
+ * are then lofted using `BRepOffsetAPI_ThruSections`.
+ *
+ * @param sections - At least 2 section configs with profile wires.
+ * @param spine - The path wire to sweep along.
+ * @param options - Sweep configuration.
+ * @returns Result containing the swept Solid or Shell.
+ */
+export function multiSectionSweep(sections, spine, options) {
+    if (sections.length < 2) {
+        return err(validationError(BrepErrorCode.MULTI_SWEEP_INSUFFICIENT_SECTIONS, `Multi-section sweep requires at least 2 sections, got ${sections.length}`));
+    }
+    const { solid = true, ruled = false, tolerance = 1e-6 } = options ?? {};
+    // Validate locations before touching the kernel — returns clean Result errors
+    const locationErr = validateSectionLocations(sections);
+    if (locationErr)
+        return err(locationErr);
+    try {
+        const kernel = getKernel();
+        const paramsResult = computeSectionParams(sections, spine, kernel);
+        if (isErr(paramsResult))
+            return paramsResult;
+        const params = paramsResult.value;
+        // Position each profile wire along the spine and loft. positionOnCurve and
+        // downcast each allocate a fresh arena slot per section that loftAdvanced only
+        // consumes (never frees) — track and release them once the loft is built.
+        const positioned = [];
+        const positionedWires = [];
+        try {
+            for (let i = 0; i < sections.length; i++) {
+                const param = params[i];
+                const section = sections[i];
+                if (param === undefined || section === undefined)
+                    continue;
+                const p = kernel.positionOnCurve(section.wire.wrapped, spine.wrapped, param);
+                positioned.push(p);
+                positionedWires.push(kernel.downcast(p, 'wire'));
+            }
+            const loftResult = kernel.loftAdvanced(positionedWires, { solid, ruled, tolerance });
+            const result = castResultShape(loftResult);
+            if (!isShape3D(result)) {
+                disposeResultShape(result);
+                return err(typeCastError('MULTI_SWEEP_NOT_3D', 'Multi-section sweep did not produce a 3D shape'));
+            }
+            return ok(result);
+        }
+        finally {
+            // The loft result shares these wires' refcounted TShapes and survives.
+            // release() is idempotent, so an aliased downcast (occt-wasm) is safe.
+            for (const w of positionedWires)
+                kernel.dispose(w);
+            for (const p of positioned)
+                kernel.dispose(p);
+        }
+    }
+    catch (e) {
+        const raw = e instanceof Error ? e.message : String(e);
+        return err(kernelError(BrepErrorCode.MULTI_SWEEP_FAILED, `Multi-section sweep failed: ${raw}`, e, undefined, 'Common causes: profile too large for path curvature, self-intersecting result, or discontinuous path. Try simplifying the profile or path.'));
+    }
+}
+// ---------------------------------------------------------------------------
+// Guided sweep
+// ---------------------------------------------------------------------------
+/**
+ * Sweep a profile wire along a spine, using guide wires to control shape evolution.
+ *
+ * The first guide wire is used as an auxiliary spine via `SetMode_5`, which
+ * controls how the profile orientation evolves along the path.
+ *
+ * @param profile - The cross-section wire to sweep.
+ * @param spine - The path wire to sweep along.
+ * @param guides - Guide wires controlling profile evolution. First guide is used as auxiliary spine.
+ * @param options - Sweep configuration.
+ * @returns Result containing the swept Solid or Shell.
+ */
+export function guidedSweep(profile, spine, guides, options = {}) {
+    const { transition = 'transformed', solid = true, tolerance } = options;
+    try {
+        const kernel = getKernel();
+        const shellMode = !solid;
+        const auxiliary = guides.length > 0 ? guides[0]?.wrapped : undefined;
+        const sweepResult = kernel.sweepPipeShell(profile.wrapped, spine.wrapped, {
+            transitionMode: transition,
+            ...(auxiliary ? { auxiliary } : {}),
+            shellMode,
+            ...(tolerance !== undefined ? { tolerance, boundTolerance: tolerance } : {}),
+        });
+        const ocShape = typeof sweepResult === 'object' && 'shape' in sweepResult ? sweepResult.shape : sweepResult;
+        const result = castResultShape(ocShape);
+        if (!isShape3D(result)) {
+            disposeResultShape(result);
+            return err(typeCastError('GUIDED_SWEEP_NOT_3D', 'Guided sweep did not produce a 3D shape'));
+        }
+        return ok(result);
+    }
+    catch (e) {
+        const raw = e instanceof Error ? e.message : String(e);
+        return err(kernelError(BrepErrorCode.GUIDED_SWEEP_FAILED, `Guided sweep failed: ${raw}`, e, undefined, 'Common causes: profile too large for path curvature, self-intersecting result, or discontinuous path. Try simplifying the profile or path.'));
+    }
+}
+//# sourceMappingURL=sweepFns.js.map

package/dist/vendored/brepjs/operations/sweepFns.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"sweepFns.js","sourceRoot":"","sources":["../../../../src/vendored/brepjs/operations/sweepFns.ts"],"names":[],"mappings":"AAAA;;;;;GAKG;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAEH,OAAO,EAAE,SAAS,EAAE,MAAM,oBAAoB,CAAC;AAG/C,OAAO,EAAE,MAAM,EAAE,SAAS,EAAE,MAAM,mBAAmB,CAAC;AAEtD,OAAO,EACL,eAAe,EACf,kBAAkB,EAClB,SAAS,EACT,MAAM,IAAI,WAAW,GACtB,MAAM,uBAAuB,CAAC;AAC/B,OAAO,EAAe,EAAE,EAAE,GAAG,EAAE,KAAK,EAAE,MAAM,mBAAmB,CAAC;AAChE,OAAO,EAEL,eAAe,EACf,WAAW,EACX,aAAa,EACb,aAAa,GACd,MAAM,mBAAmB,CAAC;AAC3B,OAAO,EAAE,mBAAmB,EAA4C,MAAM,mBAAmB,CAAC;AAiClG,8EAA8E;AAC9E,+BAA+B;AAC/B,8EAA8E;AAE9E,iEAAiE;AACjE,SAAS,aAAa,CAAC,KAAW,EAAE,GAAS;IAC3C,MAAM,MAAM,GAAG,SAAS,EAAE,CAAC;IAC3B,MAAM,IAAI,GAAG,MAAM,CAAC,YAAY,CAAC,CAAC,GAAG,KAAK,CAAC,EAAE,CAAC,GAAG,GAAG,CAAC,CAAC,CAAC;IACvD,MAAM,IAAI,GAAG,MAAM,CAAC,QAAQ,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC;IACrC,gFAAgF;IAChF,wEAAwE;IACxE,MAAM,CAAC,OAAO,CAAC,IAAI,CAAC,CAAC;IACrB,OAAO,eAAe,CAAC,IAAI,CAAS,CAAC;AACvC,CAAC;AAED,8CAA8C;AAC9C,SAAS,aAAa,CACpB,KAAa,EACb,MAAc,EACd,MAAc,EACd,MAAY,EACZ,GAAS,EACT,UAAU,GAAG,KAAK;IAElB,MAAM,MAAM,GAAG,SAAS,EAAE,CAAC;IAC3B,OAAO,eAAe,CACpB,MAAM,CAAC,aAAa,CAAC,KAAK,EAAE,MAAM,EAAE,MAAM,EAAE,CAAC,GAAG,MAAM,CAAC,EAAE,CAAC,GAAG,GAAG,CAAC,EAAE,UAAU,CAAC,CACvE,CAAC;AACZ,CAAC;AAED,8EAA8E;AAC9E,gBAAgB;AAChB,8EAA8E;AAE9E,uGAAuG;AACvG,SAAS,mBAAmB,CAAC,MAI5B;IACC,MAAM,KAAK,GAAG,eAAe,CAAC,MAAM,CAAC,KAAK,CAAC,CAAC;IAC5C,MAAM,SAAS,GAAG,eAAe,CAAC,MAAM,CAAC,UAAU,CAAC,CAAC;IACrD,MAAM,OAAO,GAAG,eAAe,CAAC,MAAM,CAAC,SAAS,CAAC,CAAC;IAClD,MAAM,UAAU,GAAG,GAAS,EAAE;QAC5B,kBAAkB,CAAC,KAAK,CAAC,CAAC;QAC1B,kBAAkB,CAAC,SAAS,CAAC,CAAC;QAC9B,kBAAkB,CAAC,OAAO,CAAC,CAAC;IAC9B,CAAC,CAAC;IACF,IAAI,CAAC,SAAS,CAAC,KAAK,CAAC,EAAE,CAAC;QACtB,UAAU,EAAE,CAAC;QACb,OAAO,GAAG,CAAC,aAAa,CAAC,cAAc,EAAE,kCAAkC,CAAC,CAAC,CAAC;IAChF,CAAC;IACD,IAAI,CAAC,WAAW,CAAC,SAAS,CAAC,EAAE,CAAC;QAC5B,UAAU,EAAE,CAAC;QACb,OAAO,GAAG,CAAC,aAAa,CAAC,sBAAsB,EAAE,oCAAoC,CAAC,CAAC,CAAC;IAC1F,CAAC;IACD,IAAI,CAAC,WAAW,CAAC,OAAO,CAAC,EAAE,CAAC;QAC1B,UAAU,EAAE,CAAC;QACb,OAAO,GAAG,CAAC,aAAa,CAAC,oBAAoB,EAAE,mCAAmC,CAAC,CAAC,CAAC;IACvF,CAAC;IACD,OAAO,EAAE,CAAC,CAAC,KAAK,EAAE,SAAS,EAAE,OAAO,CAA0B,CAAC,CAAC;AAClE,CAAC;AAED;;;;;;;;;;;GAWG;AACH,MAAM,UAAU,KAAK,CACnB,IAA2B,EAC3B,KAAsB,EACtB,SAAuB,EAAE,EACzB,SAAS,GAAG,KAAK;IAEjB,uDAAuD;IACvD,IAAI,MAAM,CAAC,IAAI,KAAK,QAAQ,IAAI,CAAC,SAAS,EAAE,CAAC;QAC3C,MAAM,MAAM,GAAG,SAAS,EAAE,CAAC;QAC3B,MAAM,QAAQ,GAAG,MAAM,CAAC,UAAU,CAAC,IAAI,CAAC,OAAO,EAAE,KAAK,CAAC,OAAO,CAAC,CAAC;QAChE,MAAM,KAAK,GAAG,eAAe,CAAC,QAAQ,CAAC,CAAC;QACxC,IAAI,CAAC,SAAS,CAAC,KAAK,CAAC,EAAE,CAAC;YACtB,kBAAkB,CAAC,KAAK,CAAC,CAAC;YAC1B,OAAO,GAAG,CAAC,aAAa,CAAC,cAAc,EAAE,wCAAwC,CAAC,CAAC,CAAC;QACtF,CAAC;QACD,OAAO,EAAE,CAAC,KAAK,CAAC,CAAC;IACnB,CAAC;IAED,MAAM,EACJ,MAAM,GAAG,KAAK,EACd,cAAc,EACd,GAAG,GAAG,IAAI,EACV,cAAc,GAAG,OAAO,EACxB,WAAW,EACX,OAAO,EACP,6BAA6B,EAC7B,SAAS,EACT,cAAc,EACd,gBAAgB,EAChB,SAAS,EACT,WAAW,GACZ,GAAG,MAAM,CAAC;IAEX,MAAM,MAAM,GAAG,SAAS,EAAE,CAAC;IAC3B,MAAM,cAAc,GAAG,cAAc,KAAK,OAAO,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC,6BAA6B,CAAC;IAE3F,MAAM,MAAM,GAAG,MAAM,CAAC,cAAc,CAAC,IAAI,CAAC,OAAO,EAAE,KAAK,CAAC,OAAO,EAAE;QAChE,cAAc;QACd,OAAO,EAAE,CAAC,CAAC,WAAW;QACtB,UAAU,EAAE,cAAc;QAC1B,MAAM;QACN,SAAS;QACT,GAAG,CAAC,cAAc,EAAE,OAAO,CAAC,CAAC,CAAC,EAAE,SAAS,EAAE,cAAc,CAAC,OAAO,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC;QACzE,GAAG,CAAC,GAAG,KAAK,IAAI,CAAC,CAAC,CAAC,EAAE,GAAG,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC;QAChC,GAAG,CAAC,OAAO,KAAK,IAAI,CAAC,CAAC,CAAC,EAAE,OAAO,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC;QACxC,SAAS;QACT,cAAc;QACd,gBAAgB;QAChB,SAAS;QACT,WAAW;KACZ,CAAC,CAAC;IAEH,IAAI,SAAS,IAAI,OAAO,MAAM,KAAK,QAAQ,IAAI,YAAY,IAAI,MAAM,EAAE,CAAC;QACtE,OAAO,mBAAmB,CAAC,MAAM,CAAC,CAAC;IACrC,CAAC;IAED,MAAM,KAAK,GAAG,eAAe,CAAC,MAAM,CAAC,CAAC;IACtC,IAAI,CAAC,SAAS,CAAC,KAAK,CAAC,EAAE,CAAC;QACtB,kBAAkB,CAAC,KAAK,CAAC,CAAC;QAC1B,OAAO,GAAG,CAAC,aAAa,CAAC,cAAc,EAAE,kCAAkC,CAAC,CAAC,CAAC;IAChF,CAAC;IACD,OAAO,EAAE,CAAC,KAAK,CAAC,CAAC;AACnB,CAAC;AAED,8EAA8E;AAC9E,qBAAqB;AACrB,8EAA8E;AAE9E;;;;;;;;;;;GAWG;AACH,MAAM,UAAU,cAAc,CAC5B,IAA2B,EAC3B,MAAY,EACZ,MAAY,EACZ,OAAmB;IAEnB,MAAM,QAAQ,GAAG,MAAM,CAAC,MAAM,EAAE,MAAM,CAAC,CAAC;IACxC,MAAM,KAAK,GAAG,aAAa,CAAC,MAAM,EAAE,QAAQ,CAAC,CAAC;IAC9C,OAAO,KAAK,CAAC,IAAI,EAAE,KAAK,EAAE,EAAE,OAAO,EAAE,CAAoB,CAAC;AAC5D,CAAC;AAED;;;;;;;;;;;;;GAaG;AACH,MAAM,UAAU,cAAc,CAC5B,IAA2B,EAC3B,MAAY,EACZ,MAAY,EACZ,YAA+B,EAC/B,SAAS,GAAG,KAAK;;;QAEjB,MAAM,eAAe,GAAG,SAAS,CAAC,MAAM,CAAC,CAAC;QAC1C,IAAI,eAAe,GAAG,KAAK,EAAE,CAAC;YAC5B,OAAO,GAAG,CACR,eAAe,CAAC,uBAAuB,EAAE,0CAA0C,CAAC,CACrF,CAAC;QACJ,CAAC;QACD,MAAM,QAAQ,GAAG,MAAM,CAAC,MAAM,EAAE,MAAM,CAAC,CAAC;QACxC,gFAAgF;QAChF,MAAM,KAAK,kCAAG,aAAa,CAAC,MAAM,EAAE,QAAQ,CAAC,QAAA,CAAC;QAC9C,IAAI,GAAG,GAAG,IAAI,CAAC;QACf,IAAI,YAAY,EAAE,CAAC;YACjB,MAAM,SAAS,GAAG,mBAAmB,CAAC,eAAe,EAAE,YAAY,CAAC,CAAC;YACrE,IAAI,KAAK,CAAC,SAAS,CAAC;gBAAE,OAAO,SAAS,CAAC;YACvC,GAAG,GAAG,SAAS,CAAC,KAAK,CAAC;QACxB,CAAC;QACD,OAAO,KAAK,CAAC,IAAI,EAAE,KAAK,EAAE,EAAE,GAAG,EAAE,EAAE,SAAS,CAAC,CAAC;;;;;;;;;CAC/C;AAED;;;;;;;;;;;;;;GAcG;AACH,MAAM,UAAU,YAAY,CAC1B,IAA2B,EAC3B,YAAoB,EACpB,MAAY,EACZ,MAAY,EACZ,YAA+B,EAC/B,SAAS,GAAG,KAAK;;;QAEjB,IAAI,IAAI,CAAC,GAAG,CAAC,YAAY,CAAC,GAAG,KAAK,EAAE,CAAC;YACnC,OAAO,GAAG,CAAC,eAAe,CAAC,kBAAkB,EAAE,4BAA4B,CAAC,CAAC,CAAC;QAChF,CAAC;QACD,MAAM,eAAe,GAAG,SAAS,CAAC,MAAM,CAAC,CAAC;QAC1C,IAAI,eAAe,GAAG,KAAK,EAAE,CAAC;YAC5B,OAAO,GAAG,CACR,eAAe,CAAC,uBAAuB,EAAE,0CAA0C,CAAC,CACrF,CAAC;QACJ,CAAC;QAED,MAAM,QAAQ,GAAG,MAAM,CAAC,MAAM,EAAE,MAAM,CAAC,CAAC;QACxC,8EAA8E;QAC9E,MAAM,KAAK,kCAAG,aAAa,CAAC,MAAM,EAAE,QAAQ,CAAC,QAAA,CAAC;QAE9C,MAAM,UAAU,GAAG,YAAY,GAAG,CAAC,CAAC;QACpC,MAAM,KAAK,GAAG,CAAC,KAAK,GAAG,IAAI,CAAC,GAAG,CAAC,YAAY,CAAC,CAAC,GAAG,eAAe,CAAC;QACjE,MAAM,cAAc,kCAAG,aAAa,CAAC,KAAK,EAAE,eAAe,EAAE,CAAC,EAAE,MAAM,EAAE,MAAM,EAAE,UAAU,CAAC,QAAA,CAAC;QAE5F,IAAI,GAAG,GAAG,IAAI,CAAC;QACf,IAAI,YAAY,EAAE,CAAC;YACjB,MAAM,SAAS,GAAG,mBAAmB,CAAC,eAAe,EAAE,YAAY,CAAC,CAAC;YACrE,IAAI,KAAK,CAAC,SAAS,CAAC;gBAAE,OAAO,SAAS,CAAC;YACvC,GAAG,GAAG,SAAS,CAAC,KAAK,CAAC;QACxB,CAAC;QACD,OAAO,KAAK,CAAC,IAAI,EAAE,KAAK,EAAE,EAAE,cAAc,EAAE,GAAG,EAAE,EAAE,SAAS,CAAC,CAAC;;;;;;;;;CAC/D;AAED,8EAA8E;AAC9E,gCAAgC;AAChC,8EAA8E;AAE9E,qFAAqF;AACrF,SAAS,wBAAwB,CAC/B,QAA2C;IAE3C,MAAM,iBAAiB,GAAG,QAAQ,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,QAAQ,CAAC,CAAC;IAC1D,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,iBAAiB,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;QAClD,MAAM,GAAG,GAAG,iBAAiB,CAAC,CAAC,CAAC,CAAC;QACjC,IAAI,GAAG,KAAK,SAAS,IAAI,CAAC,GAAG,GAAG,CAAC,IAAI,GAAG,GAAG,CAAC,CAAC,EAAE,CAAC;YAC9C,OAAO,eAAe,CACpB,aAAa,CAAC,kBAAkB,EAChC,WAAW,CAAC,aAAa,GAAG,yBAAyB,CACtD,CAAC;QACJ,CAAC;IACH,CAAC;IACD,MAAM,WAAW,GAAG,iBAAiB,CAAC,MAAM,CAAC,CAAC,CAAC,EAAe,EAAE,CAAC,CAAC,KAAK,SAAS,CAAC,CAAC;IAClF,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,WAAW,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;QAC5C,IAAI,CAAC,WAAW,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,IAAI,CAAC,WAAW,CAAC,CAAC,GAAG,CAAC,CAAC,IAAI,CAAC,CAAC,EAAE,CAAC;YACvD,OAAO,eAAe,CACpB,aAAa,CAAC,kBAAkB,EAChC,+CAA+C,CAChD,CAAC;QACJ,CAAC;IACH,CAAC;IACD,OAAO,SAAS,CAAC;AACnB,CAAC;AAED,mFAAmF;AACnF,SAAS,oBAAoB,CAC3B,QAA2C,EAC3C,KAAsB,EACtB,MAAoC;IAEpC,MAAM,CAAC,MAAM,EAAE,KAAK,CAAC,GAAG,MAAM,CAAC,eAAe,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC;IAC9D,MAAM,MAAM,GAAG,KAAK,GAAG,MAAM,CAAC;IAE9B,4EAA4E;IAC5E,iEAAiE;IACjE,MAAM,MAAM,GAAa,IAAI,KAAK,CAAC,QAAQ,CAAC,MAAM,CAAC,CAAC;IACpD,yCAAyC;IACzC,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,QAAQ,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;QACzC,MAAM,GAAG,GAAG,QAAQ,CAAC,CAAC,CAAC,EAAE,QAAQ,CAAC;QAClC,MAAM,CAAC,CAAC,CAAC,GAAG,GAAG,KAAK,SAAS,CAAC,CAAC,CAAC,MAAM,GAAG,GAAG,GAAG,MAAM,CAAC,CAAC,CAAC,MAAM,CAAC,GAAG,CAAC;IACrE,CAAC;IACD,yDAAyD;IACzD,IAAI,OAAO,GAAG,CAAC,CAAC,CAAC;IACjB,IAAI,OAAO,GAAG,MAAM,CAAC,CAAC,wBAAwB;IAC9C,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,IAAI,QAAQ,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;QAC1C,MAAM,KAAK,GAAG,CAAC,KAAK,QAAQ,CAAC,MAAM,CAAC;QACpC,MAAM,UAAU,GAAG,CAAC,KAAK,IAAI,CAAC,MAAM,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC,CAAC,IAAI,MAAM,CAAC,GAAG,CAAC,CAAC;QACpE,IAAI,UAAU,IAAI,KAAK,EAAE,CAAC;YACxB,MAAM,OAAO,GAAG,KAAK,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,IAAI,KAAK,CAAC,CAAC;YACrD,qCAAqC;YACrC,MAAM,QAAQ,GAAG,CAAC,GAAG,OAAO,GAAG,CAAC,CAAC;YACjC,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,IAAI,QAAQ,EAAE,CAAC,EAAE,EAAE,CAAC;gBACnC,MAAM,CAAC,OAAO,GAAG,CAAC,CAAC,GAAG,OAAO,GAAG,CAAC,CAAC,GAAG,CAAC,QAAQ,GAAG,CAAC,CAAC,CAAC,GAAG,CAAC,OAAO,GAAG,OAAO,CAAC,CAAC;YAC7E,CAAC;YACD,IAAI,CAAC,KAAK,EAAE,CAAC;gBACX,OAAO,GAAG,CAAC,CAAC;gBACZ,OAAO,GAAG,MAAM,CAAC,CAAC,CAAC,IAAI,MAAM,CAAC;YAChC,CAAC;QACH,CAAC;IACH,CAAC;IAED,qDAAqD;IACrD,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,MAAM,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;QACvC,IAAI,CAAC,MAAM,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,IAAI,CAAC,MAAM,CAAC,CAAC,GAAG,CAAC,CAAC,IAAI,CAAC,CAAC,EAAE,CAAC;YAC7C,OAAO,GAAG,CACR,eAAe,CACb,aAAa,CAAC,kBAAkB,EAChC,oEAAoE,CAAC,GAAG;gBACtE,IAAI,MAAM,CAAC,CAAC,GAAG,CAAC,CAAC,EAAE,OAAO,CAAC,CAAC,CAAC,OAAO,MAAM,CAAC,CAAC,CAAC,EAAE,OAAO,CAAC,CAAC,CAAC,GAAG,CAC/D,CACF,CAAC;QACJ,CAAC;IACH,CAAC;IAED,OAAO,EAAE,CAAC,MAAM,CAAC,CAAC;AACpB,CAAC;AAED,8EAA8E;AAC9E,sBAAsB;AACtB,8EAA8E;AAE9E;;;;;;;;;;;GAWG;AACH,MAAM,UAAU,iBAAiB,CAC/B,QAA2C,EAC3C,KAAsB,EACtB,OAA2B;IAE3B,IAAI,QAAQ,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QACxB,OAAO,GAAG,CACR,eAAe,CACb,aAAa,CAAC,iCAAiC,EAC/C,yDAAyD,QAAQ,CAAC,MAAM,EAAE,CAC3E,CACF,CAAC;IACJ,CAAC;IAED,MAAM,EAAE,KAAK,GAAG,IAAI,EAAE,KAAK,GAAG,KAAK,EAAE,SAAS,GAAG,IAAI,EAAE,GAAG,OAAO,IAAI,EAAE,CAAC;IAExE,8EAA8E;IAC9E,MAAM,WAAW,GAAG,wBAAwB,CAAC,QAAQ,CAAC,CAAC;IACvD,IAAI,WAAW;QAAE,OAAO,GAAG,CAAC,WAAW,CAAC,CAAC;IAEzC,IAAI,CAAC;QACH,MAAM,MAAM,GAAG,SAAS,EAAE,CAAC;QAC3B,MAAM,YAAY,GAAG,oBAAoB,CAAC,QAAQ,EAAE,KAAK,EAAE,MAAM,CAAC,CAAC;QACnE,IAAI,KAAK,CAAC,YAAY,CAAC;YAAE,OAAO,YAAY,CAAC;QAC7C,MAAM,MAAM,GAAG,YAAY,CAAC,KAAK,CAAC;QAElC,2EAA2E;QAC3E,+EAA+E;QAC/E,0EAA0E;QAC1E,MAAM,UAAU,GAAkB,EAAE,CAAC;QACrC,MAAM,eAAe,GAAkB,EAAE,CAAC;QAC1C,IAAI,CAAC;YACH,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,QAAQ,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;gBACzC,MAAM,KAAK,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC;gBACxB,MAAM,OAAO,GAAG,QAAQ,CAAC,CAAC,CAAC,CAAC;gBAC5B,IAAI,KAAK,KAAK,SAAS,IAAI,OAAO,KAAK,SAAS;oBAAE,SAAS;gBAE3D,MAAM,CAAC,GAAG,MAAM,CAAC,eAAe,CAAC,OAAO,CAAC,IAAI,CAAC,OAAO,EAAE,KAAK,CAAC,OAAO,EAAE,KAAK,CAAC,CAAC;gBAC7E,UAAU,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC;gBACnB,eAAe,CAAC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,CAAC,EAAE,MAAM,CAAC,CAAC,CAAC;YACnD,CAAC;YAED,MAAM,UAAU,GAAG,MAAM,CAAC,YAAY,CAAC,eAAe,EAAE,EAAE,KAAK,EAAE,KAAK,EAAE,SAAS,EAAE,CAAC,CAAC;YAErF,MAAM,MAAM,GAAG,eAAe,CAAC,UAAU,CAAC,CAAC;YAC3C,IAAI,CAAC,SAAS,CAAC,MAAM,CAAC,EAAE,CAAC;gBACvB,kBAAkB,CAAC,MAAM,CAAC,CAAC;gBAC3B,OAAO,GAAG,CACR,aAAa,CAAC,oBAAoB,EAAE,gDAAgD,CAAC,CACtF,CAAC;YACJ,CAAC;YACD,OAAO,EAAE,CAAC,MAAuB,CAAC,CAAC;QACrC,CAAC;gBAAS,CAAC;YACT,uEAAuE;YACvE,uEAAuE;YACvE,KAAK,MAAM,CAAC,IAAI,eAAe;gBAAE,MAAM,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC;YACnD,KAAK,MAAM,CAAC,IAAI,UAAU;gBAAE,MAAM,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC;QAChD,CAAC;IACH,CAAC;IAAC,OAAO,CAAU,EAAE,CAAC;QACpB,MAAM,GAAG,GAAG,CAAC,YAAY,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC;QACvD,OAAO,GAAG,CACR,WAAW,CACT,aAAa,CAAC,kBAAkB,EAChC,+BAA+B,GAAG,EAAE,EACpC,CAAC,EACD,SAAS,EACT,4IAA4I,CAC7I,CACF,CAAC;IACJ,CAAC;AACH,CAAC;AAED,8EAA8E;AAC9E,eAAe;AACf,8EAA8E;AAE9E;;;;;;;;;;;GAWG;AACH,MAAM,UAAU,WAAW,CACzB,OAAwB,EACxB,KAAsB,EACtB,MAAsC,EACtC,UAA8B,EAAE;IAEhC,MAAM,EAAE,UAAU,GAAG,aAAa,EAAE,KAAK,GAAG,IAAI,EAAE,SAAS,EAAE,GAAG,OAAO,CAAC;IAExE,IAAI,CAAC;QACH,MAAM,MAAM,GAAG,SAAS,EAAE,CAAC;QAC3B,MAAM,SAAS,GAAG,CAAC,KAAK,CAAC;QAEzB,MAAM,SAAS,GAAG,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,OAAO,CAAC,CAAC,CAAC,SAAS,CAAC;QACrE,MAAM,WAAW,GAAG,MAAM,CAAC,cAAc,CAAC,OAAO,CAAC,OAAO,EAAE,KAAK,CAAC,OAAO,EAAE;YACxE,cAAc,EAAE,UAAU;YAC1B,GAAG,CAAC,SAAS,CAAC,CAAC,CAAC,EAAE,SAAS,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC;YACnC,SAAS;YACT,GAAG,CAAC,SAAS,KAAK,SAAS,CAAC,CAAC,CAAC,EAAE,SAAS,EAAE,cAAc,EAAE,SAAS,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC;SAC7E,CAAC,CAAC;QAEH,MAAM,OAAO,GACX,OAAO,WAAW,KAAK,QAAQ,IAAI,OAAO,IAAI,WAAW,CAAC,CAAC,CAAC,WAAW,CAAC,KAAK,CAAC,CAAC,CAAC,WAAW,CAAC;QAE9F,MAAM,MAAM,GAAG,eAAe,CAAC,OAAO,CAAC,CAAC;QACxC,IAAI,CAAC,SAAS,CAAC,MAAM,CAAC,EAAE,CAAC;YACvB,kBAAkB,CAAC,MAAM,CAAC,CAAC;YAC3B,OAAO,GAAG,CAAC,aAAa,CAAC,qBAAqB,EAAE,yCAAyC,CAAC,CAAC,CAAC;QAC9F,CAAC;QACD,OAAO,EAAE,CAAC,MAAuB,CAAC,CAAC;IACrC,CAAC;IAAC,OAAO,CAAU,EAAE,CAAC;QACpB,MAAM,GAAG,GAAG,CAAC,YAAY,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC;QACvD,OAAO,GAAG,CACR,WAAW,CACT,aAAa,CAAC,mBAAmB,EACjC,wBAAwB,GAAG,EAAE,EAC7B,CAAC,EACD,SAAS,EACT,4IAA4I,CAC7I,CACF,CAAC;IACJ,CAAC;AACH,CAAC","sourcesContent":["/**\n * Sweep operations — generic sweep, support extrude, complex extrude,\n * twist extrude, multi-section sweep, and guided sweep.\n *\n * Consolidated from extrudeFns, multiSweepFns, and guidedSweepFns.\n */\n\nimport { getKernel } from '../kernel/index.js';\nimport type { KernelShape, KernelType } from '../kernel/types.js';\nimport type { Vec3 } from '../core/types.js';\nimport { vecAdd, vecLength } from '../core/vecOps.js';\nimport type { ClosedWire, Dimension, Wire, Shell, Solid, Shape3D } from '../core/shapeTypes.js';\nimport {\n  castResultShape,\n  disposeResultShape,\n  isShape3D,\n  isWire as isWireGuard,\n} from '../core/shapeTypes.js';\nimport { type Result, ok, err, isErr } from '../core/result.js';\nimport {\n  type BrepError,\n  validationError,\n  kernelError,\n  typeCastError,\n  BrepErrorCode,\n} from '../core/errors.js';\nimport { buildLawFromProfile, type ExtrusionProfile, type SweepOptions } from './extrudeUtils.js';\n\n// Re-export types from consolidated modules\nexport type { ExtrusionProfile, SweepOptions } from './extrudeUtils.js';\n\n/** Configuration for a single sweep section (profile wire + optional location). */\nexport interface SweepSectionConfig {\n  /** The profile wire for this section. */\n  wire: Wire<Dimension>;\n  /** Location along the spine as a parameter in [0.0, 1.0]. Auto-distributed if omitted. */\n  location?: number;\n}\n\n/** Options for the multi-section sweep operation. */\nexport interface MultiSweepOptions {\n  /** Produce a solid (true) or shell (false). Defaults to true. */\n  solid?: boolean;\n  /** Use ruled (straight) interpolation between sections. Defaults to false. */\n  ruled?: boolean;\n  /** Tolerance for the loft builder. Defaults to 1e-6. */\n  tolerance?: number;\n}\n\n/** Options for guide curve sweep. */\nexport interface GuidedSweepOptions {\n  /** Transition mode at spine vertices. Defaults to 'transformed'. */\n  transition?: 'transformed' | 'round' | 'right';\n  /** Produce a solid (true) or shell (false). Defaults to true. */\n  solid?: boolean;\n  /** Builder tolerance. When set, passed to SetTolerance. */\n  tolerance?: number;\n}\n\n// ---------------------------------------------------------------------------\n// Internal: spine construction\n// ---------------------------------------------------------------------------\n\n/** Build a wire spine from start to end point (line segment). */\nfunction makeSpineWire(start: Vec3, end: Vec3): Wire {\n  const kernel = getKernel();\n  const edge = kernel.makeLineEdge([...start], [...end]);\n  const wire = kernel.makeWire([edge]);\n  // The edge is consumed into the wire (shared refcounted TShape); `.delete()` is\n  // a no-op on arena kernels, so release its slot through kernel.dispose.\n  kernel.dispose(edge);\n  return castResultShape(wire) as Wire;\n}\n\n/** Build a helix wire for twist extrusion. */\nfunction makeHelixWire(\n  pitch: number,\n  height: number,\n  radius: number,\n  center: Vec3,\n  dir: Vec3,\n  leftHanded = false\n): Wire {\n  const kernel = getKernel();\n  return castResultShape(\n    kernel.makeHelixWire(pitch, height, radius, [...center], [...dir], leftHanded)\n  ) as Wire;\n}\n\n// ---------------------------------------------------------------------------\n// Generic sweep\n// ---------------------------------------------------------------------------\n\n/** Cast a shell-mode sweep result `[shell, startWire, endWire]`, releasing all three on any reject. */\nfunction castSweepShellTuple(result: {\n  shape: KernelShape;\n  firstShape: KernelShape;\n  lastShape: KernelShape;\n}): Result<[Shape3D, Wire, Wire]> {\n  const shape = castResultShape(result.shape);\n  const startWire = castResultShape(result.firstShape);\n  const endWire = castResultShape(result.lastShape);\n  const disposeAll = (): void => {\n    disposeResultShape(shape);\n    disposeResultShape(startWire);\n    disposeResultShape(endWire);\n  };\n  if (!isShape3D(shape)) {\n    disposeAll();\n    return err(typeCastError('SWEEP_NOT_3D', 'Sweep did not produce a 3D shape'));\n  }\n  if (!isWireGuard(startWire)) {\n    disposeAll();\n    return err(typeCastError('SWEEP_START_NOT_WIRE', 'Sweep did not produce a start Wire'));\n  }\n  if (!isWireGuard(endWire)) {\n    disposeAll();\n    return err(typeCastError('SWEEP_END_NOT_WIRE', 'Sweep did not produce an end Wire'));\n  }\n  return ok([shape, startWire, endWire] as [Shape3D, Wire, Wire]);\n}\n\n/**\n * Sweep a wire profile along a spine wire to create a 3D shape.\n *\n * Supports Frenet framing, auxiliary spine twist, scaling laws, contact\n * detection, and configurable corner transition modes.\n *\n * @param wire - The profile wire to sweep (must be closed for solid output).\n * @param spine - The path wire to sweep along.\n * @param config - Sweep configuration (frenet, transition mode, scaling law, etc.).\n * @param shellMode - When `true`, return `[shell, startWire, endWire]` instead of a solid.\n * @returns `Result` containing either a solid or a `[Shape3D, Wire, Wire]` tuple in shell mode.\n */\nexport function sweep(\n  wire: ClosedWire<Dimension>,\n  spine: Wire<Dimension>,\n  config: SweepOptions = {},\n  shellMode = false\n): Result<Shape3D | [Shape3D, Wire, Wire]> {\n  // Fast path: simple pipe mode (BRepOffsetAPI_MakePipe)\n  if (config.mode === 'simple' && !shellMode) {\n    const kernel = getKernel();\n    const resultOc = kernel.simplePipe(wire.wrapped, spine.wrapped);\n    const shape = castResultShape(resultOc);\n    if (!isShape3D(shape)) {\n      disposeResultShape(shape);\n      return err(typeCastError('SWEEP_NOT_3D', 'Simple pipe did not produce a 3D shape'));\n    }\n    return ok(shape);\n  }\n\n  const {\n    frenet = false,\n    auxiliarySpine,\n    law = null,\n    transitionMode = 'right',\n    withContact,\n    support,\n    forceProfileSpineOthogonality,\n    tolerance,\n    boundTolerance,\n    angularTolerance,\n    maxDegree,\n    maxSegments,\n  } = config;\n\n  const kernel = getKernel();\n  const withCorrection = transitionMode === 'round' ? true : !!forceProfileSpineOthogonality;\n\n  const result = kernel.sweepPipeShell(wire.wrapped, spine.wrapped, {\n    transitionMode,\n    contact: !!withContact,\n    correction: withCorrection,\n    frenet,\n    shellMode,\n    ...(auxiliarySpine?.wrapped ? { auxiliary: auxiliarySpine.wrapped } : {}),\n    ...(law !== null ? { law } : {}),\n    ...(support !== null ? { support } : {}),\n    tolerance,\n    boundTolerance,\n    angularTolerance,\n    maxDegree,\n    maxSegments,\n  });\n\n  if (shellMode && typeof result === 'object' && 'firstShape' in result) {\n    return castSweepShellTuple(result);\n  }\n\n  const shape = castResultShape(result);\n  if (!isShape3D(shape)) {\n    disposeResultShape(shape);\n    return err(typeCastError('SWEEP_NOT_3D', 'Sweep did not produce a 3D shape'));\n  }\n  return ok(shape);\n}\n\n// ---------------------------------------------------------------------------\n// Complex extrusions\n// ---------------------------------------------------------------------------\n\n/**\n * Extrude a wire along a normal constrained to a support surface.\n *\n * Constructs a linear spine from `center` to `center + normal` and sweeps\n * the profile wire along it, constrained by the support surface geometry.\n *\n * @param wire - The profile wire to sweep (must be closed).\n * @param center - Start point of the extrusion spine.\n * @param normal - Direction and length of the extrusion.\n * @param support - kernel support surface that constrains the sweep.\n * @returns `Result` containing the swept 3D shape.\n */\nexport function supportExtrude(\n  wire: ClosedWire<Dimension>,\n  center: Vec3,\n  normal: Vec3,\n  support: KernelType\n): Result<Shape3D> {\n  const endPoint = vecAdd(center, normal);\n  const spine = makeSpineWire(center, endPoint);\n  return sweep(wire, spine, { support }) as Result<Shape3D>;\n}\n\n/**\n * Extrude a wire along a normal with optional profile scaling.\n *\n * Builds a linear spine from `center` to `center + normal` and sweeps the\n * profile wire. When `profileShape` is provided, a scaling law (s-curve or\n * linear) modulates the cross-section size along the path.\n *\n * @param wire - The profile wire to sweep (must be closed).\n * @param center - Start point of the extrusion spine.\n * @param normal - Direction and length of the extrusion. Must be non-zero.\n * @param profileShape - Optional scaling profile applied along the extrusion.\n * @param shellMode - When `true`, return `[shell, startWire, endWire]` instead of a solid.\n * @returns `Result` containing the extruded shape or a shell tuple.\n */\nexport function complexExtrude(\n  wire: ClosedWire<Dimension>,\n  center: Vec3,\n  normal: Vec3,\n  profileShape?: ExtrusionProfile,\n  shellMode = false\n): Result<Shape3D | [Shape3D, Wire, Wire]> {\n  const extrusionLength = vecLength(normal);\n  if (extrusionLength < 1e-10) {\n    return err(\n      validationError('ZERO_LENGTH_EXTRUSION', 'Extrusion vector cannot have zero length')\n    );\n  }\n  const endPoint = vecAdd(center, normal);\n  // sweep is immutable and does not consume the spine — dispose it on every exit.\n  using spine = makeSpineWire(center, endPoint);\n  let law = null;\n  if (profileShape) {\n    const lawResult = buildLawFromProfile(extrusionLength, profileShape);\n    if (isErr(lawResult)) return lawResult;\n    law = lawResult.value;\n  }\n  return sweep(wire, spine, { law }, shellMode);\n}\n\n/**\n * Extrude a wire along a normal with helical twist and optional profile scaling.\n *\n * Constructs a helical auxiliary spine that rotates the profile by\n * `angleDegrees` over the extrusion length. Combines twist with optional\n * s-curve or linear scaling when `profileShape` is provided.\n *\n * @param wire - The profile wire to sweep (must be closed).\n * @param angleDegrees - Total twist rotation in degrees. Must be non-zero.\n * @param center - Start point of the extrusion spine.\n * @param normal - Direction and length of the extrusion. Must be non-zero.\n * @param profileShape - Optional scaling profile applied along the extrusion.\n * @param shellMode - When `true`, return `[shell, startWire, endWire]` instead of a solid.\n * @returns `Result` containing the twisted extruded shape or a shell tuple.\n */\nexport function twistExtrude(\n  wire: ClosedWire<Dimension>,\n  angleDegrees: number,\n  center: Vec3,\n  normal: Vec3,\n  profileShape?: ExtrusionProfile,\n  shellMode = false\n): Result<Shape3D | [Shape3D, Wire, Wire]> {\n  if (Math.abs(angleDegrees) < 1e-10) {\n    return err(validationError('ZERO_TWIST_ANGLE', 'Twist angle cannot be zero'));\n  }\n  const extrusionLength = vecLength(normal);\n  if (extrusionLength < 1e-10) {\n    return err(\n      validationError('ZERO_LENGTH_EXTRUSION', 'Extrusion vector cannot have zero length')\n    );\n  }\n\n  const endPoint = vecAdd(center, normal);\n  // sweep is immutable and consumes neither spine — dispose both on every exit.\n  using spine = makeSpineWire(center, endPoint);\n\n  const leftHanded = angleDegrees < 0;\n  const pitch = (360.0 / Math.abs(angleDegrees)) * extrusionLength;\n  using auxiliarySpine = makeHelixWire(pitch, extrusionLength, 1, center, normal, leftHanded);\n\n  let law = null;\n  if (profileShape) {\n    const lawResult = buildLawFromProfile(extrusionLength, profileShape);\n    if (isErr(lawResult)) return lawResult;\n    law = lawResult.value;\n  }\n  return sweep(wire, spine, { auxiliarySpine, law }, shellMode);\n}\n\n// ---------------------------------------------------------------------------\n// Multi-section sweep — helpers\n// ---------------------------------------------------------------------------\n\n/** Validate that explicit section locations are in [0,1] and strictly increasing. */\nfunction validateSectionLocations(\n  sections: ReadonlyArray<SweepSectionConfig>\n): BrepError | undefined {\n  const explicitLocations = sections.map((s) => s.location);\n  for (let i = 0; i < explicitLocations.length; i++) {\n    const loc = explicitLocations[i];\n    if (loc !== undefined && (loc < 0 || loc > 1)) {\n      return validationError(\n        BrepErrorCode.MULTI_SWEEP_FAILED,\n        `Section ${i} location ${loc} is out of range [0, 1]`\n      );\n    }\n  }\n  const definedLocs = explicitLocations.filter((l): l is number => l !== undefined);\n  for (let i = 1; i < definedLocs.length; i++) {\n    if ((definedLocs[i] ?? 0) <= (definedLocs[i - 1] ?? 0)) {\n      return validationError(\n        BrepErrorCode.MULTI_SWEEP_FAILED,\n        'Section locations must be strictly increasing'\n      );\n    }\n  }\n  return undefined;\n}\n\n/** Compute spine parameters for each section given the spine's parameter range. */\nfunction computeSectionParams(\n  sections: ReadonlyArray<SweepSectionConfig>,\n  spine: Wire<Dimension>,\n  kernel: ReturnType<typeof getKernel>\n): Result<number[]> {\n  const [uFirst, uLast] = kernel.curveParameters(spine.wrapped);\n  const uRange = uLast - uFirst;\n\n  // Build params: explicit locations override, gaps are linearly interpolated\n  // between the nearest explicit neighbors (or 0/1 at boundaries).\n  const params: number[] = new Array(sections.length);\n  // First pass: resolve explicit locations\n  for (let i = 0; i < sections.length; i++) {\n    const loc = sections[i]?.location;\n    params[i] = loc !== undefined ? uFirst + loc * uRange : Number.NaN;\n  }\n  // Second pass: interpolate gaps between explicit anchors\n  let prevIdx = -1;\n  let prevVal = uFirst; // implicit 0.0 at start\n  for (let i = 0; i <= sections.length; i++) {\n    const isEnd = i === sections.length;\n    const isExplicit = !isEnd && !Number.isNaN(params[i] ?? Number.NaN);\n    if (isExplicit || isEnd) {\n      const nextVal = isEnd ? uLast : (params[i] ?? uLast);\n      // Fill gap between prevIdx+1 and i-1\n      const gapCount = i - prevIdx - 1;\n      for (let g = 1; g <= gapCount; g++) {\n        params[prevIdx + g] = prevVal + (g / (gapCount + 1)) * (nextVal - prevVal);\n      }\n      if (!isEnd) {\n        prevIdx = i;\n        prevVal = params[i] ?? uFirst;\n      }\n    }\n  }\n\n  // Validate: final params must be strictly increasing\n  for (let i = 1; i < params.length; i++) {\n    if ((params[i] ?? 0) <= (params[i - 1] ?? 0)) {\n      return err(\n        validationError(\n          BrepErrorCode.MULTI_SWEEP_FAILED,\n          `Computed section parameters are not strictly increasing at index ${i} ` +\n            `(${params[i - 1]?.toFixed(4)} >= ${params[i]?.toFixed(4)})`\n        )\n      );\n    }\n  }\n\n  return ok(params);\n}\n\n// ---------------------------------------------------------------------------\n// Multi-section sweep\n// ---------------------------------------------------------------------------\n\n/**\n * Sweep multiple profile sections along a spine wire.\n *\n * Each section wire is positioned at a point along the spine (either at an\n * explicit `location` parameter or auto-distributed evenly). The profiles\n * are then lofted using `BRepOffsetAPI_ThruSections`.\n *\n * @param sections - At least 2 section configs with profile wires.\n * @param spine - The path wire to sweep along.\n * @param options - Sweep configuration.\n * @returns Result containing the swept Solid or Shell.\n */\nexport function multiSectionSweep(\n  sections: ReadonlyArray<SweepSectionConfig>,\n  spine: Wire<Dimension>,\n  options?: MultiSweepOptions\n): Result<Solid | Shell> {\n  if (sections.length < 2) {\n    return err(\n      validationError(\n        BrepErrorCode.MULTI_SWEEP_INSUFFICIENT_SECTIONS,\n        `Multi-section sweep requires at least 2 sections, got ${sections.length}`\n      )\n    );\n  }\n\n  const { solid = true, ruled = false, tolerance = 1e-6 } = options ?? {};\n\n  // Validate locations before touching the kernel — returns clean Result errors\n  const locationErr = validateSectionLocations(sections);\n  if (locationErr) return err(locationErr);\n\n  try {\n    const kernel = getKernel();\n    const paramsResult = computeSectionParams(sections, spine, kernel);\n    if (isErr(paramsResult)) return paramsResult;\n    const params = paramsResult.value;\n\n    // Position each profile wire along the spine and loft. positionOnCurve and\n    // downcast each allocate a fresh arena slot per section that loftAdvanced only\n    // consumes (never frees) — track and release them once the loft is built.\n    const positioned: KernelShape[] = [];\n    const positionedWires: KernelShape[] = [];\n    try {\n      for (let i = 0; i < sections.length; i++) {\n        const param = params[i];\n        const section = sections[i];\n        if (param === undefined || section === undefined) continue;\n\n        const p = kernel.positionOnCurve(section.wire.wrapped, spine.wrapped, param);\n        positioned.push(p);\n        positionedWires.push(kernel.downcast(p, 'wire'));\n      }\n\n      const loftResult = kernel.loftAdvanced(positionedWires, { solid, ruled, tolerance });\n\n      const result = castResultShape(loftResult);\n      if (!isShape3D(result)) {\n        disposeResultShape(result);\n        return err(\n          typeCastError('MULTI_SWEEP_NOT_3D', 'Multi-section sweep did not produce a 3D shape')\n        );\n      }\n      return ok(result as Solid | Shell);\n    } finally {\n      // The loft result shares these wires' refcounted TShapes and survives.\n      // release() is idempotent, so an aliased downcast (occt-wasm) is safe.\n      for (const w of positionedWires) kernel.dispose(w);\n      for (const p of positioned) kernel.dispose(p);\n    }\n  } catch (e: unknown) {\n    const raw = e instanceof Error ? e.message : String(e);\n    return err(\n      kernelError(\n        BrepErrorCode.MULTI_SWEEP_FAILED,\n        `Multi-section sweep failed: ${raw}`,\n        e,\n        undefined,\n        'Common causes: profile too large for path curvature, self-intersecting result, or discontinuous path. Try simplifying the profile or path.'\n      )\n    );\n  }\n}\n\n// ---------------------------------------------------------------------------\n// Guided sweep\n// ---------------------------------------------------------------------------\n\n/**\n * Sweep a profile wire along a spine, using guide wires to control shape evolution.\n *\n * The first guide wire is used as an auxiliary spine via `SetMode_5`, which\n * controls how the profile orientation evolves along the path.\n *\n * @param profile - The cross-section wire to sweep.\n * @param spine - The path wire to sweep along.\n * @param guides - Guide wires controlling profile evolution. First guide is used as auxiliary spine.\n * @param options - Sweep configuration.\n * @returns Result containing the swept Solid or Shell.\n */\nexport function guidedSweep(\n  profile: Wire<Dimension>,\n  spine: Wire<Dimension>,\n  guides: ReadonlyArray<Wire<Dimension>>,\n  options: GuidedSweepOptions = {}\n): Result<Solid | Shell> {\n  const { transition = 'transformed', solid = true, tolerance } = options;\n\n  try {\n    const kernel = getKernel();\n    const shellMode = !solid;\n\n    const auxiliary = guides.length > 0 ? guides[0]?.wrapped : undefined;\n    const sweepResult = kernel.sweepPipeShell(profile.wrapped, spine.wrapped, {\n      transitionMode: transition,\n      ...(auxiliary ? { auxiliary } : {}),\n      shellMode,\n      ...(tolerance !== undefined ? { tolerance, boundTolerance: tolerance } : {}),\n    });\n\n    const ocShape =\n      typeof sweepResult === 'object' && 'shape' in sweepResult ? sweepResult.shape : sweepResult;\n\n    const result = castResultShape(ocShape);\n    if (!isShape3D(result)) {\n      disposeResultShape(result);\n      return err(typeCastError('GUIDED_SWEEP_NOT_3D', 'Guided sweep did not produce a 3D shape'));\n    }\n    return ok(result as Solid | Shell);\n  } catch (e: unknown) {\n    const raw = e instanceof Error ? e.message : String(e);\n    return err(\n      kernelError(\n        BrepErrorCode.GUIDED_SWEEP_FAILED,\n        `Guided sweep failed: ${raw}`,\n        e,\n        undefined,\n        'Common causes: profile too large for path curvature, self-intersecting result, or discontinuous path. Try simplifying the profile or path.'\n      )\n    );\n  }\n}\n"]}

package/dist/vendored/brepjs/operations/threadFns.d.ts

@@ -0,0 +1,57 @@
+/**
+ * Functional thread operation — builds a helical screw thread.
+ *
+ * occt-wasm's `BRepOffsetAPI_MakePipeShell` (the `sweep` path) cannot reliably
+ * sweep a profile along a helix, so the thread is built the way the OCCT bottle
+ * tutorial does it: by lofting (`BRepOffsetAPI_ThruSections`) through a series of
+ * tooth cross-sections rotated around the axis. The result is the helical thread
+ * *ridge* — fuse it to a core cylinder for an external thread, or cut it from a
+ * bore (with `inward: true`) for an internal thread.
+ */
+import type { Shape3D } from '../core/shapeTypes.js';
+import { type Result } from '../core/result.js';
+/** Configuration for {@link thread}. Units are mm; angles derive from pitch. */
+export interface ThreadOptions {
+    /** Core radius (external) or nominal hole radius (internal), at the thread root. */
+    radius: number;
+    /** Axial distance per full turn. */
+    pitch: number;
+    /** Total thread length along the axis. Turn count = `height / pitch`. */
+    height: number;
+    /** Radial thread height (crest minus root). Defaults to `0.6 * pitch` (≈ISO 60° V). */
+    depth?: number;
+    /** Axial half-width of the tooth at the root. Defaults to `0.42 * pitch`. */
+    toothHalfWidth?: number;
+    /**
+     * Axial half-width of a flat crest, giving a trapezoidal tooth instead of a
+     * pointed V. `0` (default) is a sharp V (ISO/UN). Use a positive value for a
+     * power-screw profile: `≈0.18 * pitch` ≈ Acme/trapezoidal, up near
+     * `toothHalfWidth` ≈ square thread. Must be `< toothHalfWidth`.
+     */
+    crest?: number;
+    /** Loft sections per turn — higher is smoother but slower. Defaults to `20`. */
+    sectionsPerTurn?: number;
+    /** Left-handed thread. Defaults to `false` (right-handed). */
+    lefthand?: boolean;
+    /** Point the tooth toward the axis (for an internal thread to `cut` from a bore). */
+    inward?: boolean;
+}
+/**
+ * Build a helical screw-thread ridge by lofting rotated tooth sections.
+ *
+ * @param options - {@link ThreadOptions}.
+ * @returns `Result` with the thread-ridge solid, or an error.
+ *
+ * @example External thread (Ø12 rod, 2.5 mm pitch):
+ * ```ts
+ * const ridge = thread({ radius: 6, pitch: 2.5, height: 7.5 });
+ * const rod = fuse(cylinder(6.15, 7.5), unwrap(ridge));
+ * ```
+ * @example Internal thread (tapped Ø6 hole):
+ * ```ts
+ * const ridge = thread({ radius: 3, pitch: 1, height: 6, inward: true });
+ * const nut = cut(boredBlock, unwrap(ridge));
+ * ```
+ */
+export declare function thread(options: ThreadOptions): Result<Shape3D>;
+//# sourceMappingURL=threadFns.d.ts.map

package/dist/vendored/brepjs/operations/threadFns.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"threadFns.d.ts","sourceRoot":"","sources":["../../../../src/vendored/brepjs/operations/threadFns.ts"],"names":[],"mappings":"AAAA;;;;;;;;;GASG;AAGH,OAAO,KAAK,EAAmB,OAAO,EAAE,MAAM,uBAAuB,CAAC;AACtE,OAAO,EAAE,KAAK,MAAM,EAAa,MAAM,mBAAmB,CAAC;AAM3D,gFAAgF;AAChF,MAAM,WAAW,aAAa;IAC5B,oFAAoF;IACpF,MAAM,EAAE,MAAM,CAAC;IACf,oCAAoC;IACpC,KAAK,EAAE,MAAM,CAAC;IACd,yEAAyE;IACzE,MAAM,EAAE,MAAM,CAAC;IACf,uFAAuF;IACvF,KAAK,CAAC,EAAE,MAAM,CAAC;IACf,6EAA6E;IAC7E,cAAc,CAAC,EAAE,MAAM,CAAC;IACxB;;;;;OAKG;IACH,KAAK,CAAC,EAAE,MAAM,CAAC;IACf,gFAAgF;IAChF,eAAe,CAAC,EAAE,MAAM,CAAC;IACzB,8DAA8D;IAC9D,QAAQ,CAAC,EAAE,OAAO,CAAC;IACnB,qFAAqF;IACrF,MAAM,CAAC,EAAE,OAAO,CAAC;CAClB;AAED;;;;;;;;;;;;;;;;GAgBG;AACH,wBAAgB,MAAM,CAAC,OAAO,EAAE,aAAa,GAAG,MAAM,CAAC,OAAO,CAAC,CA8D9D"}