@cesium/engine 2.0.0 → 2.1.0

package/Source/Scene/Globe.js

@@ -78,7 +78,7 @@ function Globe(ellipsoid) {
   /**
    * Determines if the globe will be shown.
    *
-   * @type {Boolean}
+   * @type {boolean}
    * @default true
    */
   this.show = true;
@@ -92,7 +92,7 @@ function Globe(ellipsoid) {
    * The maximum screen-space error used to drive level-of-detail refinement.  Higher
    * values will provide better performance but lower visual quality.
    *
-   * @type {Number}
+   * @type {number}
    * @default 2
    */
   this.maximumScreenSpaceError = 2;
@@ -103,7 +103,7 @@ function Globe(ellipsoid) {
    * this frame.  A larger number will consume more memory but will show detail faster
    * when, for example, zooming out and then back in.
    *
-   * @type {Number}
+   * @type {number}
    * @default 100
    */
   this.tileCacheSize = 100;
@@ -116,7 +116,7 @@ function Globe(ellipsoid) {
    * tile level to be loaded successively, significantly increasing load time. Setting it to a large
    * number (e.g. 1000) will minimize the number of tiles that are loaded but tend to make
    * detail appear all at once after a long wait.
-   * @type {Number}
+   * @type {number}
    * @default 20
    */
   this.loadingDescendantLimit = 20;
@@ -125,7 +125,7 @@ function Globe(ellipsoid) {
    * Gets or sets a value indicating whether the ancestors of rendered tiles should be preloaded.
    * Setting this to true optimizes the zoom-out experience and provides more detail in
    * newly-exposed areas when panning. The down side is that it requires loading more tiles.
-   * @type {Boolean}
+   * @type {boolean}
    * @default true
    */
   this.preloadAncestors = true;
@@ -135,7 +135,7 @@ function Globe(ellipsoid) {
    * Setting this to true causes tiles with the same parent as a rendered tile to be loaded, even
    * if they are culled. Setting this to true may provide a better panning experience at the
    * cost of loading more tiles.
-   * @type {Boolean}
+   * @type {boolean}
    * @default false
    */
   this.preloadSiblings = false;
@@ -153,7 +153,7 @@ function Globe(ellipsoid) {
   /**
    * Enable lighting the globe with the scene's light source.
    *
-   * @type {Boolean}
+   * @type {boolean}
    * @default false
    */
   this.enableLighting = false;
@@ -163,7 +163,7 @@ function Globe(ellipsoid) {
    * This number is multiplied by the result of <code>czm_getLambertDiffuse</code> in GlobeFS.glsl.
    * This only takes effect when <code>enableLighting</code> is <code>true</code>.
    *
-   * @type {Number}
+   * @type {number}
    * @default 0.9
    */
   this.lambertDiffuseMultiplier = 0.9;
@@ -172,7 +172,7 @@ function Globe(ellipsoid) {
    * Enable dynamic lighting effects on atmosphere and fog. This only takes effect
    * when <code>enableLighting</code> is <code>true</code>.
    *
-   * @type {Boolean}
+   * @type {boolean}
    * @default true
    */
   this.dynamicAtmosphereLighting = true;
@@ -182,7 +182,7 @@ function Globe(ellipsoid) {
    * light direction. This only takes effect when <code>enableLighting</code> and
    * <code>dynamicAtmosphereLighting</code> are <code>true</code>.
    *
-   * @type {Boolean}
+   * @type {boolean}
    * @default false
    */
   this.dynamicAtmosphereLightingFromSun = false;
@@ -190,7 +190,7 @@ function Globe(ellipsoid) {
   /**
    * Enable the ground atmosphere, which is drawn over the globe when viewed from a distance between <code>lightingFadeInDistance</code> and <code>lightingFadeOutDistance</code>.
    *
-   * @type {Boolean}
+   * @type {boolean}
    * @default true
    */
   this.showGroundAtmosphere = true;
@@ -198,7 +198,7 @@ function Globe(ellipsoid) {
   /**
    * The intensity of the light that is used for computing the ground atmosphere color.
    *
-   * @type {Number}
+   * @type {number}
    * @default 10.0
    */
   this.atmosphereLightIntensity = 10.0;
@@ -222,7 +222,7 @@ function Globe(ellipsoid) {
   /**
    * The Rayleigh scale height used in the atmospheric scattering equations for the ground atmosphere, in meters.
    *
-   * @type {Number}
+   * @type {number}
    * @default 10000.0
    */
   this.atmosphereRayleighScaleHeight = 10000.0;
@@ -230,7 +230,7 @@ function Globe(ellipsoid) {
   /**
    * The Mie scale height used in the atmospheric scattering equations for the ground atmosphere, in meters.
    *
-   * @type {Number}
+   * @type {number}
    * @default 3200.0
    */
   this.atmosphereMieScaleHeight = 3200.0;
@@ -240,7 +240,7 @@ function Globe(ellipsoid) {
    * <p>
    * Valid values are between -1.0 and 1.0.
    * </p>
-   * @type {Number}
+   * @type {number}
    * @default 0.9
    */
   this.atmosphereMieAnisotropy = 0.9;
@@ -249,7 +249,7 @@ function Globe(ellipsoid) {
    * The distance where everything becomes lit. This only takes effect
    * when <code>enableLighting</code> or <code>showGroundAtmosphere</code> is <code>true</code>.
    *
-   * @type {Number}
+   * @type {number}
    * @default 10000000.0
    */
   this.lightingFadeOutDistance = 1.0e7;
@@ -258,7 +258,7 @@ function Globe(ellipsoid) {
    * The distance where lighting resumes. This only takes effect
    * when <code>enableLighting</code> or <code>showGroundAtmosphere</code> is <code>true</code>.
    *
-   * @type {Number}
+   * @type {number}
    * @default 20000000.0
    */
   this.lightingFadeInDistance = 2.0e7;
@@ -268,7 +268,7 @@ function Globe(ellipsoid) {
    * This only takes effect when <code>showGroundAtmosphere</code>, <code>enableLighting</code>, and
    * <code>dynamicAtmosphereLighting</code> are <code>true</code>.
    *
-   * @type {Number}
+   * @type {number}
    * @default 10000000.0
    */
   this.nightFadeOutDistance = 1.0e7;
@@ -278,7 +278,7 @@ function Globe(ellipsoid) {
    * This only takes effect when <code>showGroundAtmosphere</code>, <code>enableLighting</code>, and
    * <code>dynamicAtmosphereLighting</code> are <code>true</code>.
    *
-   * @type {Number}
+   * @type {number}
    * @default 50000000.0
    */
   this.nightFadeInDistance = 5.0e7;
@@ -288,7 +288,7 @@ function Globe(ellipsoid) {
    * covered by water; otherwise, false.  This property is ignored if the
    * <code>terrainProvider</code> does not provide a water mask.
    *
-   * @type {Boolean}
+   * @type {boolean}
    * @default true
    */
   this.showWaterEffect = true;
@@ -300,7 +300,7 @@ function Globe(ellipsoid) {
    * testing primitives against terrain is that slight numerical noise or terrain level-of-detail
    * switched can sometimes make a primitive that should be on the surface disappear underneath it.
    *
-   * @type {Boolean}
+   * @type {boolean}
    * @default false
    *
    */
@@ -319,7 +319,7 @@ function Globe(ellipsoid) {
   /**
    * The hue shift to apply to the atmosphere. Defaults to 0.0 (no shift).
    * A hue shift of 1.0 indicates a complete rotation of the hues available.
-   * @type {Number}
+   * @type {number}
    * @default 0.0
    */
   this.atmosphereHueShift = 0.0;
@@ -327,7 +327,7 @@ function Globe(ellipsoid) {
   /**
    * The saturation shift to apply to the atmosphere. Defaults to 0.0 (no shift).
    * A saturation shift of -1.0 is monochrome.
-   * @type {Number}
+   * @type {number}
    * @default 0.0
    */
   this.atmosphereSaturationShift = 0.0;
@@ -335,7 +335,7 @@ function Globe(ellipsoid) {
   /**
    * The brightness shift to apply to the atmosphere. Defaults to 0.0 (no shift).
    * A brightness shift of -1.0 is complete darkness, which will let space show through.
-   * @type {Number}
+   * @type {number}
    * @default 0.0
    */
   this.atmosphereBrightnessShift = 0.0;
@@ -345,7 +345,7 @@ function Globe(ellipsoid) {
    * A value of <code>2.0</code> scales the terrain by 2x.
    * A value of <code>0.0</code> makes the terrain completely flat.
    * Note that terrain exaggeration will not modify any other primitive as they are positioned relative to the ellipsoid.
-   * @type {Number}
+   * @type {number}
    * @default 1.0
    */
   this.terrainExaggeration = 1.0;
@@ -355,7 +355,7 @@ function Globe(ellipsoid) {
    * Terrain that is above this height will scale upwards and terrain that is below this height will scale downwards.
    * Note that terrain exaggeration will not modify any other primitive as they are positioned relative to the ellipsoid.
    * If {@link Globe#terrainExaggeration} is <code>1.0</code> this value will have no effect.
-   * @type {Number}
+   * @type {number}
    * @default 0.0
    */
   this.terrainExaggerationRelativeHeight = 0.0;
@@ -364,7 +364,7 @@ function Globe(ellipsoid) {
    * Whether to show terrain skirts. Terrain skirts are geometry extending downwards from a tile's edges used to hide seams between neighboring tiles.
    * Skirts are always hidden when the camera is underground or translucency is enabled.
    *
-   * @type {Boolean}
+   * @type {boolean}
    * @default true
    */
   this.showSkirts = true;
@@ -372,7 +372,7 @@ function Globe(ellipsoid) {
   /**
    * Whether to cull back-facing terrain. Back faces are not culled when the camera is underground or translucency is enabled.
    *
-   * @type {Boolean}
+   * @type {boolean}
    * @default true
    */
   this.backFaceCulling = true;
@@ -384,7 +384,7 @@ function Globe(ellipsoid) {
    * Determines the darkness of the vertex shadow.
    * This only takes effect when <code>enableLighting</code> is <code>true</code>.
    *
-   * @type {Number}
+   * @type {number}
    * @default 0.3
    */
   this.vertexShadowDarkness = 0.3;
@@ -427,7 +427,7 @@ Object.defineProperties(Globe.prototype, {
    * Returns <code>true</code> when the tile load queue is empty, <code>false</code> otherwise.  When the load queue is empty,
    * all terrain and imagery for the current view have been loaded.
    * @memberof Globe.prototype
-   * @type {Boolean}
+   * @type {boolean}
    * @readonly
    */
   tilesLoaded: {
@@ -493,7 +493,7 @@ Object.defineProperties(Globe.prototype, {
    * The normal map to use for rendering waves in the ocean.  Setting this property will
    * only have an effect if the configured terrain provider includes a water mask.
    * @memberof Globe.prototype
-   * @type {String}
+   * @type {string}
    * @default buildModuleUrl('Assets/Textures/waterNormalsSmall.jpg')
    */
   oceanNormalMapUrl: {
@@ -699,7 +699,7 @@ const scratchSphereIntersectionResult = {
  *
  * @param {Ray} ray The ray to test for intersection.
  * @param {Scene} scene The scene.
- * @param {Boolean} [cullBackFaces=true] Set to true to not pick back faces.
+ * @param {boolean} [cullBackFaces=true] Set to true to not pick back faces.
  * @param {Cartesian3} [result] The object onto which to store the result.
  * @returns {Cartesian3|undefined} The intersection or <code>undefined</code> if none was found.  The returned position is in projected coordinates for 2D and Columbus View.
  *
@@ -837,7 +837,7 @@ function tileIfContainsCartographic(tile, cartographic) {
  * Get the height of the surface at a given cartographic.
  *
  * @param {Cartographic} cartographic The cartographic for which to find the height.
- * @returns {Number|undefined} The height of the cartographic or undefined if it could not be found.
+ * @returns {number|undefined} The height of the cartographic or undefined if it could not be found.
  */
 Globe.prototype.getHeight = function (cartographic) {
   //>>includeStart('debug', pragmas.debug);
@@ -1097,7 +1097,7 @@ Globe.prototype.endFrame = function (frameState) {
  * If this object was destroyed, it should not be used; calling any function other than
  * <code>isDestroyed</code> will result in a {@link DeveloperError} exception.
  *
- * @returns {Boolean} True if this object was destroyed; otherwise, false.
+ * @returns {boolean} True if this object was destroyed; otherwise, false.
  *
  * @see Globe#destroy
  */

package/Source/Scene/GlobeSurfaceTile.js

@@ -79,7 +79,7 @@ Object.defineProperties(GlobeSurfaceTile.prototype, {
    * unloaded while it is needed for rendering, regardless of the value of this
    * property.
    * @memberof GlobeSurfaceTile.prototype
-   * @type {Boolean}
+   * @type {boolean}
    */
   eligibleForUnloading: {
     get: function () {

package/Source/Scene/GlobeSurfaceTileProvider.js

@@ -232,7 +232,7 @@ Object.defineProperties(GlobeSurfaceTileProvider.prototype, {
   /**
    * Gets a value indicating whether or not the provider is ready for use.
    * @memberof GlobeSurfaceTileProvider.prototype
-   * @type {Boolean}
+   * @type {boolean}
    */
   ready: {
     get: function () {
@@ -565,8 +565,8 @@ GlobeSurfaceTileProvider.prototype.cancelReprojections = function () {
  * Gets the maximum geometric error allowed in a tile at a given level, in meters.  This function should not be
  * called before {@link GlobeSurfaceTileProvider#ready} returns true.
  *
- * @param {Number} level The tile level for which to get the maximum geometric error.
- * @returns {Number} The maximum geometric error in meters.
+ * @param {number} level The tile level for which to get the maximum geometric error.
+ * @returns {number} The maximum geometric error in meters.
  */
 GlobeSurfaceTileProvider.prototype.getLevelMaximumGeometricError = function (
   level
@@ -993,7 +993,7 @@ const tileDirectionScratch = new Cartesian3();
  * Determines the priority for loading this tile. Lower priority values load sooner.
  * @param {QuadtreeTile} tile The tile.
  * @param {FrameState} frameState The frame state.
- * @returns {Number} The load priority value.
+ * @returns {number} The load priority value.
  */
 GlobeSurfaceTileProvider.prototype.computeTileLoadPriority = function (
   tile,
@@ -1142,7 +1142,7 @@ function computeOccludeePoint(
  * @param {QuadtreeTile} tile The tile instance.
  * @param {FrameState} frameState The state information of the current rendering frame.
  *
- * @returns {Number} The distance from the camera to the closest point on the tile, in meters.
+ * @returns {number} The distance from the camera to the closest point on the tile, in meters.
  */
 GlobeSurfaceTileProvider.prototype.computeDistanceToTile = function (
   tile,
@@ -1357,7 +1357,7 @@ function updateTileBoundingRegion(tile, tileProvider, frameState) {
  * If this object was destroyed, it should not be used; calling any function other than
  * <code>isDestroyed</code> will result in a {@link DeveloperError} exception.
  *
- * @returns {Boolean} True if this object was destroyed; otherwise, false.
+ * @returns {boolean} True if this object was destroyed; otherwise, false.
  *
  * @see GlobeSurfaceTileProvider#destroy
  */

package/Source/Scene/GlobeTranslucency.js

@@ -34,7 +34,7 @@ Object.defineProperties(GlobeTranslucency.prototype, {
    *
    * @memberof GlobeTranslucency.prototype
    *
-   * @type {Boolean}
+   * @type {boolean}
    * @default false
    *
    * @see GlobeTranslucency#frontFaceAlpha
@@ -61,7 +61,7 @@ Object.defineProperties(GlobeTranslucency.prototype, {
    *
    * @memberof GlobeTranslucency.prototype
    *
-   * @type {Number}
+   * @type {number}
    * @default 1.0
    *
    * @see GlobeTranslucency#enabled
@@ -141,7 +141,7 @@ Object.defineProperties(GlobeTranslucency.prototype, {
    *
    * @memberof GlobeTranslucency.prototype
    *
-   * @type {Number}
+   * @type {number}
    * @default 1.0
    *
    * @see GlobeTranslucency#enabled

package/Source/Scene/GltfBufferViewLoader.js

@@ -16,13 +16,13 @@ import ResourceLoaderState from "./ResourceLoaderState.js";
  * @constructor
  * @augments ResourceLoader
  *
- * @param {Object} options Object with the following properties:
+ * @param {object} options Object with the following properties:
  * @param {ResourceCache} options.resourceCache The {@link ResourceCache} (to avoid circular dependencies).
- * @param {Object} options.gltf The glTF JSON.
- * @param {Number} options.bufferViewId The buffer view ID.
+ * @param {object} options.gltf The glTF JSON.
+ * @param {number} options.bufferViewId The buffer view ID.
  * @param {Resource} options.gltfResource The {@link Resource} containing the glTF.
  * @param {Resource} options.baseResource The {@link Resource} that paths in the glTF JSON are relative to.
- * @param {String} [options.cacheKey] The cache key of the resource.
+ * @param {string} [options.cacheKey] The cache key of the resource.
  *
  * @private
  */
@@ -101,7 +101,7 @@ Object.defineProperties(GltfBufferViewLoader.prototype, {
    *
    * @memberof GltfBufferViewLoader.prototype
    *
-   * @type {Promise.<GltfBufferViewLoader>|undefined}
+   * @type {Promise<GltfBufferViewLoader>|undefined}
    * @readonly
    * @private
    */
@@ -115,7 +115,7 @@ Object.defineProperties(GltfBufferViewLoader.prototype, {
    *
    * @memberof GltfBufferViewLoader.prototype
    *
-   * @type {String}
+   * @type {string}
    * @readonly
    * @private
    */
@@ -142,7 +142,7 @@ Object.defineProperties(GltfBufferViewLoader.prototype, {
 
 /**
  * Loads the resource.
- * @returns {Promise.<GltfBufferViewLoader>} A promise which resolves to the loader when the resource loading is completed.
+ * @returns {Promise<GltfBufferViewLoader>} A promise which resolves to the loader when the resource loading is completed.
  * @private
  */
 GltfBufferViewLoader.prototype.load = function () {

package/Source/Scene/GltfDracoLoader.js

@@ -15,13 +15,13 @@ import ResourceLoaderState from "./ResourceLoaderState.js";
  * @constructor
  * @augments ResourceLoader
  *
- * @param {Object} options Object with the following properties:
+ * @param {object} options Object with the following properties:
  * @param {ResourceCache} options.resourceCache The {@link ResourceCache} (to avoid circular dependencies).
- * @param {Object} options.gltf The glTF JSON.
- * @param {Object} options.draco The Draco extension object.
+ * @param {object} options.gltf The glTF JSON.
+ * @param {object} options.draco The Draco extension object.
  * @param {Resource} options.gltfResource The {@link Resource} containing the glTF.
  * @param {Resource} options.baseResource The {@link Resource} that paths in the glTF JSON are relative to.
- * @param {String} [options.cacheKey] The cache key of the resource.
+ * @param {string} [options.cacheKey] The cache key of the resource.
  *
  * @private
  */
@@ -68,7 +68,7 @@ Object.defineProperties(GltfDracoLoader.prototype, {
    *
    * @memberof GltfDracoLoader.prototype
    *
-   * @type {Promise.<GltfDracoLoader>}
+   * @type {Promise<GltfDracoLoader>}
    * @readonly
    * @private
    */
@@ -82,7 +82,7 @@ Object.defineProperties(GltfDracoLoader.prototype, {
    *
    * @memberof GltfDracoLoader.prototype
    *
-   * @type {String}
+   * @type {string}
    * @readonly
    * @private
    */
@@ -96,7 +96,7 @@ Object.defineProperties(GltfDracoLoader.prototype, {
    *
    * @memberof GltfDracoLoader.prototype
    *
-   * @type {Object}
+   * @type {object}
    * @readonly
    * @private
    */
@@ -109,7 +109,7 @@ Object.defineProperties(GltfDracoLoader.prototype, {
 
 /**
  * Loads the resource.
- * @returns {Promise.<GltfDracoLoader>} A promise which resolves to the loader when the resource loading is completed.
+ * @returns {Promise<GltfDracoLoader>} A promise which resolves to the loader when the resource loading is completed.
  * @private
  */
 GltfDracoLoader.prototype.load = function () {

package/Source/Scene/GltfImageLoader.js

@@ -17,13 +17,13 @@ import ResourceLoaderState from "./ResourceLoaderState.js";
  * @constructor
  * @augments ResourceLoader
  *
- * @param {Object} options Object with the following properties:
+ * @param {object} options Object with the following properties:
  * @param {ResourceCache} options.resourceCache The {@link ResourceCache} (to avoid circular dependencies).
- * @param {Object} options.gltf The glTF JSON.
- * @param {Number} options.imageId The image ID.
+ * @param {object} options.gltf The glTF JSON.
+ * @param {number} options.imageId The image ID.
  * @param {Resource} options.gltfResource The {@link Resource} containing the glTF.
  * @param {Resource} options.baseResource The {@link Resource} that paths in the glTF JSON are relative to.
- * @param {String} [options.cacheKey] The cache key of the resource.
+ * @param {string} [options.cacheKey] The cache key of the resource.
  *
  * @private
  */
@@ -73,7 +73,7 @@ Object.defineProperties(GltfImageLoader.prototype, {
    *
    * @memberof GltfImageLoader.prototype
    *
-   * @type {Promise.<GltfImageLoader>|undefined}
+   * @type {Promise<GltfImageLoader>|undefined}
    * @readonly
    * @private
    */
@@ -87,7 +87,7 @@ Object.defineProperties(GltfImageLoader.prototype, {
    *
    * @memberof GltfImageLoader.prototype
    *
-   * @type {String}
+   * @type {string}
    * @readonly
    * @private
    */
@@ -128,7 +128,7 @@ Object.defineProperties(GltfImageLoader.prototype, {
 
 /**
  * Loads the resource.
- * @returns {Promise.<GltfImageLoader>} A promise which resolves to the loader when the resource loading is completed.
+ * @returns {Promise<GltfImageLoader>} A promise which resolves to the loader when the resource loading is completed.
  * @private
  */
 GltfImageLoader.prototype.load = function () {

package/Source/Scene/GltfIndexBufferLoader.js

@@ -21,17 +21,17 @@ import ResourceLoaderState from "./ResourceLoaderState.js";
  * @constructor
  * @augments ResourceLoader
  *
- * @param {Object} options Object with the following properties:
+ * @param {object} options Object with the following properties:
  * @param {ResourceCache} options.resourceCache The {@link ResourceCache} (to avoid circular dependencies).
- * @param {Object} options.gltf The glTF JSON.
- * @param {Number} options.accessorId The accessor ID corresponding to the index buffer.
+ * @param {object} options.gltf The glTF JSON.
+ * @param {number} options.accessorId The accessor ID corresponding to the index buffer.
  * @param {Resource} options.gltfResource The {@link Resource} containing the glTF.
  * @param {Resource} options.baseResource The {@link Resource} that paths in the glTF JSON are relative to.
- * @param {Object} [options.draco] The Draco extension object.
- * @param {String} [options.cacheKey] The cache key of the resource.
- * @param {Boolean} [options.asynchronous=true] Determines if WebGL resource creation will be spread out over several frames or block until all WebGL resources are created.
- * @param {Boolean} [options.loadBuffer=false] Load the index buffer as a GPU index buffer.
- * @param {Boolean} [options.loadTypedArray=false] Load the index buffer as a typed array.
+ * @param {object} [options.draco] The Draco extension object.
+ * @param {string} [options.cacheKey] The cache key of the resource.
+ * @param {boolean} [options.asynchronous=true] Determines if WebGL resource creation will be spread out over several frames or block until all WebGL resources are created.
+ * @param {boolean} [options.loadBuffer=false] Load the index buffer as a GPU index buffer.
+ * @param {boolean} [options.loadTypedArray=false] Load the index buffer as a typed array.
  * @private
  */
 function GltfIndexBufferLoader(options) {
@@ -93,7 +93,7 @@ Object.defineProperties(GltfIndexBufferLoader.prototype, {
    *
    * @memberof GltfIndexBufferLoader.prototype
    *
-   * @type {Promise.<GltfIndexBufferLoader>|undefined}
+   * @type {Promise<GltfIndexBufferLoader>|undefined}
    * @readonly
    * @private
    */
@@ -107,7 +107,7 @@ Object.defineProperties(GltfIndexBufferLoader.prototype, {
    *
    * @memberof GltfIndexBufferLoader.prototype
    *
-   * @type {String}
+   * @type {string}
    * @readonly
    * @private
    */
@@ -165,7 +165,7 @@ const scratchIndexBufferJob = new CreateIndexBufferJob();
 
 /**
  * Loads the resource.
- * @returns {Promise.<GltfIndexBufferLoader>} A promise which resolves to the loader when the resource loading is completed.
+ * @returns {Promise<GltfIndexBufferLoader>} A promise which resolves to the loader when the resource loading is completed.
  * @private
  */
 GltfIndexBufferLoader.prototype.load = function () {

package/Source/Scene/GltfJsonLoader.js

@@ -25,13 +25,13 @@ import ResourceLoaderState from "./ResourceLoaderState.js";
  * @constructor
  * @augments ResourceLoader
  *
- * @param {Object} options Object with the following properties:
+ * @param {object} options Object with the following properties:
  * @param {ResourceCache} options.resourceCache The {@link ResourceCache} (to avoid circular dependencies).
  * @param {Resource} options.gltfResource The {@link Resource} containing the glTF.
  * @param {Resource} options.baseResource The {@link Resource} that paths in the glTF JSON are relative to.
  * @param {Uint8Array} [options.typedArray] The typed array containing the glTF contents.
- * @param {Object} [options.gltfJson] The parsed glTF JSON contents.
- * @param {String} [options.cacheKey] The cache key of the resource.
+ * @param {object} [options.gltfJson] The parsed glTF JSON contents.
+ * @param {string} [options.cacheKey] The cache key of the resource.
  *
  * @private
  */
@@ -73,7 +73,7 @@ Object.defineProperties(GltfJsonLoader.prototype, {
    *
    * @memberof GltfJsonLoader.prototype
    *
-   * @type {Promise.<GltfJsonLoader>|undefined}
+   * @type {Promise<GltfJsonLoader>|undefined}
    * @readonly
    * @private
    */
@@ -87,7 +87,7 @@ Object.defineProperties(GltfJsonLoader.prototype, {
    *
    * @memberof GltfJsonLoader.prototype
    *
-   * @type {String}
+   * @type {string}
    * @readonly
    * @private
    */
@@ -101,7 +101,7 @@ Object.defineProperties(GltfJsonLoader.prototype, {
    *
    * @memberof GltfJsonLoader.prototype
    *
-   * @type {Object}
+   * @type {object}
    * @readonly
    * @private
    */
@@ -114,7 +114,7 @@ Object.defineProperties(GltfJsonLoader.prototype, {
 
 /**
  * Loads the resource.
- * @returns {Promise.<GltfJsonLoader>} A promise which resolves to the loader when the resource loading is completed.
+ * @returns {Promise<GltfJsonLoader>} A promise which resolves to the loader when the resource loading is completed.
  * @private
  */
 GltfJsonLoader.prototype.load = function () {