@alteriom/painlessmesh 1.8.15 → 1.9.0

package/examples/alteriomPhase1/phase1_features.ino

@@ -1,242 +0,0 @@
-/**
- * Phase 1 OTA Features Example - Compressed OTA & Enhanced Status
- *
- * This example demonstrates the Phase 1 enhancements to painlessMesh:
- * - Option 1E: Compressed OTA Transfer for 40-60% bandwidth reduction
- * - Option 2A: Enhanced StatusPackage with comprehensive metrics
- *
- * Features:
- * - Compressed firmware updates reduce network bandwidth
- * - Enhanced status reporting with mesh statistics and performance metrics
- * - Backward compatible with existing nodes
- */
-
-#include "alteriom_sensor_package.hpp"
-#include "painlessMesh.h"
-
-#define MESH_PREFIX "AlteriomPhase1Mesh"
-#define MESH_PASSWORD "phase1Features"
-#define MESH_PORT 5555
-
-#define STATUS_INTERVAL 30000  // Send enhanced status every 30 seconds
-
-Scheduler userScheduler;
-painlessMesh mesh;
-
-// Task declarations
-Task statusTask(STATUS_INTERVAL, TASK_FOREVER, &sendEnhancedStatus);
-
-// Metrics tracking
-unsigned long lastRebootTime = 0;
-uint32_t totalMessagesReceived = 0;
-uint32_t totalMessagesSent = 0;
-
-void setup() {
-  Serial.begin(115200);
-  
-  lastRebootTime = millis();
-  
-  mesh.setDebugMsgTypes(ERROR | STARTUP | CONNECTION);
-  mesh.init(MESH_PREFIX, MESH_PASSWORD, &userScheduler, MESH_PORT);
-  
-  mesh.onReceive(&receivedCallback);
-  mesh.onNewConnection(&newConnectionCallback);
-  mesh.onChangedConnections(&changedConnectionCallback);
-  
-  // Add the enhanced status reporting task
-  userScheduler.addTask(statusTask);
-  statusTask.enable();
-  
-  Serial.println("Phase 1 Features Example Started");
-  Serial.println("- Compressed OTA enabled");
-  Serial.println("- Enhanced Status reporting active");
-}
-
-void loop() {
-  mesh.update();
-}
-
-/**
- * Send Enhanced Status Package with comprehensive metrics
- */
-void sendEnhancedStatus() {
-  alteriom::EnhancedStatusPackage status;
-  
-  // Device Health
-  status.deviceStatus = 0x01;  // 0x01 = Online and healthy
-  status.uptime = (millis() - lastRebootTime) / 1000;  // Uptime in seconds
-  
-#ifdef ESP32
-  status.freeMemory = ESP.getFreeHeap() / 1024;  // Free heap in KB
-  status.firmwareVersion = "1.0.0-phase1";
-  status.wifiStrength = constrain(map(WiFi.RSSI(), -100, -50, 0, 100), 0, 100);
-#elif defined(ESP8266)
-  status.freeMemory = ESP.getFreeHeap() / 1024;
-  status.firmwareVersion = "1.0.0-phase1";
-  status.wifiStrength = constrain(map(WiFi.RSSI(), -100, -50, 0, 100), 0, 100);
-#else
-  status.freeMemory = 128;  // Default for testing
-  status.firmwareVersion = "1.0.0-test";
-  status.wifiStrength = 75;
-#endif
-  
-  // For demonstration, use a placeholder MD5
-  status.firmwareMD5 = "abc123def456";
-  
-  // Mesh Statistics
-  auto nodeList = mesh.getNodeList();
-  status.nodeCount = nodeList.size();
-  status.connectionCount = nodeList.size();  // Use node count as connection count
-  status.messagesReceived = totalMessagesReceived;
-  status.messagesSent = totalMessagesSent;
-  status.messagesDropped = 0;  // Would need tracking in real implementation
-  
-  // Performance Metrics
-  // In a real implementation, these would be calculated from actual metrics
-  status.avgLatency = 50;      // Average message latency in ms
-  status.packetLossRate = 1;   // 1% packet loss
-  status.throughput = 512;     // Bytes per second
-  
-  // Alerts - check for various conditions
-  status.alertFlags = 0;
-  if (status.freeMemory < 32) {
-    status.alertFlags |= 0x01;  // Low memory alert
-  }
-  if (status.wifiStrength < 30) {
-    status.alertFlags |= 0x02;  // Weak signal alert
-  }
-  if (status.connectionCount == 0 && status.nodeCount == 0) {
-    status.alertFlags |= 0x04;  // Isolated node alert
-  }
-  
-  status.lastError = (status.alertFlags == 0) ? "" : "See alert flags";
-  
-  // Convert to JSON and send
-  String msg;
-  JsonDocument doc;  // ArduinoJson v7 uses automatic sizing
-  JsonObject obj = doc.to<JsonObject>();
-  status.addTo(std::move(obj));
-  serializeJson(doc, msg);
-  
-  mesh.sendBroadcast(msg);
-  totalMessagesSent++;
-  
-  Serial.printf("Enhanced Status sent - Nodes: %d, Mem: %dKB, Uptime: %ds\n",
-                status.nodeCount, status.freeMemory, status.uptime);
-}
-
-/**
- * Callback when messages are received
- */
-void receivedCallback(uint32_t from, String& msg) {
-  totalMessagesReceived++;
-  
-  // Parse the message to identify the type
-  JsonDocument doc;  // ArduinoJson v7 uses automatic sizing
-  DeserializationError error = deserializeJson(doc, msg);
-  
-  if (error) {
-    Serial.printf("JSON parse error from %u: %s\n", from, error.c_str());
-    return;
-  }
-  
-  JsonObject obj = doc.as<JsonObject>();
-  int msgType = obj["type"];
-  
-  switch (msgType) {
-    case 203: {  // Enhanced Status Package
-      alteriom::EnhancedStatusPackage status(obj);
-      
-      Serial.printf("Enhanced Status from %u: v%s, Nodes: %d, Mem: %dKB, Msgs: %d/%d\n",
-                    from, 
-                    status.firmwareVersion.c_str(),
-                    status.nodeCount,
-                    status.freeMemory,
-                    status.messagesReceived,
-                    status.messagesSent);
-      
-      if (status.alertFlags != 0) {
-        Serial.printf("  ALERTS (0x%02X): %s\n", status.alertFlags, status.lastError.c_str());
-      }
-      break;
-    }
-    
-    case 202: {  // Basic Status Package (backward compatible)
-      alteriom::StatusPackage status(obj);
-      Serial.printf("Basic Status from %u: v%s, Mem: %dKB\n",
-                    from, status.firmwareVersion.c_str(), status.freeMemory);
-      break;
-    }
-    
-    default:
-      Serial.printf("Message type %d from %u (not a status package)\n", msgType, from);
-      break;
-  }
-}
-
-void newConnectionCallback(uint32_t nodeId) {
-  Serial.printf("New Connection: %u\n", nodeId);
-  Serial.printf("Total nodes in mesh: %d\n", mesh.getNodeList().size());
-}
-
-void changedConnectionCallback() {
-  Serial.printf("Connections changed. Nodes: %d\n", mesh.getNodeList().size());
-}
-
-/**
- * Example: How to use Compressed OTA (sender side)
- * 
- * This function shows how to enable compressed OTA transfers.
- * In a real implementation, this would be called from an OTA sender node.
- */
-void setupCompressedOTA() {
-  #ifdef PAINLESSMESH_ENABLE_OTA
-  
-  // Example firmware info
-  String firmwareMD5 = "abc123def456789";  // MD5 of firmware
-  size_t numParts = 100;                   // Number of firmware chunks
-  
-  // Offer OTA update with compression enabled
-  // Parameters: role, hardware, md5, numParts, forced, broadcasted, compressed
-  auto otaTask = mesh.offerOTA(
-    "sensor",      // Role this firmware is for
-    "ESP32",       // Hardware type
-    firmwareMD5,   // MD5 hash of firmware
-    numParts,      // Number of data chunks
-    false,         // Not forced (only update if different)
-    false,         // Not using broadcast mode (yet - Phase 2)
-    true           // COMPRESSED! 40-60% bandwidth savings
-  );
-  
-  Serial.println("Compressed OTA announced!");
-  Serial.println("Expected bandwidth savings: 40-60%");
-  Serial.println("Nodes will receive and decompress firmware automatically");
-  
-  #else
-  Serial.println("OTA not enabled. Define PAINLESSMESH_ENABLE_OTA");
-  #endif
-}
-
-/**
- * Benefits of Phase 1 Features:
- * 
- * 1. Compressed OTA (Option 1E):
- *    - 40-60% reduction in network bandwidth
- *    - Faster firmware distribution across mesh
- *    - Lower energy consumption
- *    - Backward compatible with uncompressed OTA
- *    - Works with all future OTA options (broadcast, progressive, etc.)
- * 
- * 2. Enhanced Status Package (Option 2A):
- *    - Comprehensive device health monitoring
- *    - Mesh network statistics (nodes, connections, messages)
- *    - Performance metrics (latency, packet loss, throughput)
- *    - Alert system for proactive issue detection
- *    - Standardized format across all Alteriom nodes
- *    - Easy integration with monitoring dashboards
- * 
- * Next Steps (Phase 2):
- *    - Broadcast OTA for even faster updates in large meshes
- *    - MQTT bridge for cloud monitoring integration
- *    - Professional monitoring tools (Grafana, InfluxDB)
- */

package/examples/alteriomPhase1/platformio.ini

@@ -1,26 +0,0 @@
-[platformio]
-src_dir = .
-
-[env]
-lib_deps =
-    bblanchon/ArduinoJson
-    arkhipenko/TaskScheduler
-
-lib_ldf_mode = deep+
-[env:esp8266]
-platform = espressif8266
-board = nodemcuv2
-framework = arduino
-lib_extra_dirs = ../../  ; Load the local copy of painlessmesh. For your own example add painlessmesh to the lib_deps
-lib_deps =
-    ${env.lib_deps}  ; Inherit common dependencies
-    esp32async/ESPAsyncTCP@^2.0.0  ; Only for ESP8266
-
-[env:esp32]
-platform = espressif32
-board = esp32dev
-framework = arduino
-lib_extra_dirs = ../../  ; Load the local copy of painlessmesh. For your own example add painlessmesh to the lib_deps
-lib_deps =
-    ${env.lib_deps}  ; Inherit common dependencies
-    esp32async/AsyncTCP

package/examples/alteriomPhase2/alteriom_sensor_package.hpp

@@ -1,224 +0,0 @@
-#ifndef ALTERIOM_SENSOR_PACKAGE_HPP
-#define ALTERIOM_SENSOR_PACKAGE_HPP
-
-#include "painlessmesh/plugin.hpp"
-
-namespace alteriom {
-
-/**
- * @brief Sensor data package for broadcasting environmental measurements
- *
- * This package is designed for Alteriom's IoT sensor network requirements,
- * allowing nodes to share environmental data across the mesh.
- */
-class SensorPackage : public painlessmesh::plugin::BroadcastPackage {
- public:
-  double temperature = 0.0;  // Temperature in Celsius
-  double humidity = 0.0;     // Relative humidity percentage
-  double pressure = 0.0;     // Atmospheric pressure in hPa
-  uint32_t sensorId = 0;     // Unique sensor identifier
-  uint32_t timestamp = 0;    // Unix timestamp of measurement
-  uint8_t batteryLevel = 0;  // Battery level percentage
-
-  SensorPackage()
-      : BroadcastPackage(200) {}  // Type ID 200 for Alteriom sensors
-
-  SensorPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
-    temperature = jsonObj["temp"];
-    humidity = jsonObj["hum"];
-    pressure = jsonObj["press"];
-    sensorId = jsonObj["sid"];
-    timestamp = jsonObj["ts"];
-    batteryLevel = jsonObj["bat"];
-  }
-
-  JsonObject addTo(JsonObject&& jsonObj) const {
-    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
-    jsonObj["temp"] = temperature;
-    jsonObj["hum"] = humidity;
-    jsonObj["press"] = pressure;
-    jsonObj["sid"] = sensorId;
-    jsonObj["ts"] = timestamp;
-    jsonObj["bat"] = batteryLevel;
-    return jsonObj;
-  }
-
-#if ARDUINOJSON_VERSION_MAJOR < 7
-  size_t jsonObjectSize() const { return JSON_OBJECT_SIZE(noJsonFields + 6); }
-#endif
-};
-
-/**
- * @brief Command package for controlling Alteriom devices
- *
- * Single-destination package for sending specific commands to individual nodes.
- */
-class CommandPackage : public painlessmesh::plugin::SinglePackage {
- public:
-  uint8_t command = 0;        // Command type
-  uint32_t targetDevice = 0;  // Target device ID
-  TSTRING parameters = "";    // Command parameters as JSON string
-  uint32_t commandId = 0;     // Unique command identifier for tracking
-
-  CommandPackage() : SinglePackage(400) {}  // Type ID 201 for Alteriom commands
-
-  CommandPackage(JsonObject jsonObj) : SinglePackage(jsonObj) {
-    command = jsonObj["cmd"];
-    targetDevice = jsonObj["target"];
-    parameters = jsonObj["params"].as<TSTRING>();
-    commandId = jsonObj["cid"];
-  }
-
-  JsonObject addTo(JsonObject&& jsonObj) const {
-    jsonObj = SinglePackage::addTo(std::move(jsonObj));
-    jsonObj["cmd"] = command;
-    jsonObj["target"] = targetDevice;
-    jsonObj["params"] = parameters;
-    jsonObj["cid"] = commandId;
-    return jsonObj;
-  }
-
-#if ARDUINOJSON_VERSION_MAJOR < 7
-  size_t jsonObjectSize() const {
-    return JSON_OBJECT_SIZE(noJsonFields + 4) + parameters.length();
-  }
-#endif
-};
-
-/**
- * @brief Status report package for device health monitoring
- */
-class StatusPackage : public painlessmesh::plugin::BroadcastPackage {
- public:
-  uint8_t deviceStatus = 0;      // Device status flags
-  uint32_t uptime = 0;           // Device uptime in seconds
-  uint16_t freeMemory = 0;       // Free memory in KB
-  uint8_t wifiStrength = 0;      // WiFi signal strength
-  TSTRING firmwareVersion = "";  // Current firmware version
-
-  StatusPackage() : BroadcastPackage(202) {}  // Type ID 202 for Alteriom status
-
-  StatusPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
-    deviceStatus = jsonObj["status"];
-    uptime = jsonObj["uptime"];
-    freeMemory = jsonObj["mem"];
-    wifiStrength = jsonObj["wifi"];
-    firmwareVersion = jsonObj["fw"].as<TSTRING>();
-  }
-
-  JsonObject addTo(JsonObject&& jsonObj) const {
-    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
-    jsonObj["status"] = deviceStatus;
-    jsonObj["uptime"] = uptime;
-    jsonObj["mem"] = freeMemory;
-    jsonObj["wifi"] = wifiStrength;
-    jsonObj["fw"] = firmwareVersion;
-    return jsonObj;
-  }
-
-#if ARDUINOJSON_VERSION_MAJOR < 7
-  size_t jsonObjectSize() const {
-    return JSON_OBJECT_SIZE(noJsonFields + 5) + firmwareVersion.length();
-  }
-#endif
-};
-
-/**
- * @brief Enhanced status package with comprehensive health metrics (Phase 1)
- *
- * This is an extended version of StatusPackage that includes additional
- * mesh statistics, performance metrics, and alerting capabilities.
- * Type ID 203 is used to distinguish from the basic StatusPackage (202).
- */
-class EnhancedStatusPackage : public painlessmesh::plugin::BroadcastPackage {
- public:
-  // Device Health (from original StatusPackage)
-  uint8_t deviceStatus = 0;      // Device status flags
-  uint32_t uptime = 0;           // Device uptime in seconds
-  uint16_t freeMemory = 0;       // Free memory in KB
-  uint8_t wifiStrength = 0;      // WiFi signal strength
-  TSTRING firmwareVersion = "";  // Current firmware version
-  TSTRING firmwareMD5 = "";      // Firmware hash for OTA verification
-
-  // Mesh Statistics
-  uint16_t nodeCount = 0;         // Number of known nodes in mesh
-  uint8_t connectionCount = 0;    // Number of direct connections
-  uint32_t messagesReceived = 0;  // Total messages received
-  uint32_t messagesSent = 0;      // Total messages sent
-  uint32_t messagesDropped = 0;   // Total messages dropped/failed
-
-  // Performance Metrics
-  uint16_t avgLatency = 0;     // Average message latency in ms
-  uint8_t packetLossRate = 0;  // Packet loss rate percentage (0-100)
-  uint16_t throughput = 0;     // Network throughput in bytes/sec
-
-  // Warnings/Alerts
-  uint8_t alertFlags = 0;  // Bit flags for various alert conditions
-  TSTRING lastError = "";  // Last error message for diagnostics
-
-  EnhancedStatusPackage()
-      : BroadcastPackage(203) {}  // Type ID 203 for enhanced status
-
-  EnhancedStatusPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
-    deviceStatus = jsonObj["status"];
-    uptime = jsonObj["uptime"];
-    freeMemory = jsonObj["mem"];
-    wifiStrength = jsonObj["wifi"];
-    firmwareVersion = jsonObj["fw"].as<TSTRING>();
-    firmwareMD5 = jsonObj["fwMD5"].as<TSTRING>();
-
-    nodeCount = jsonObj["nodes"];
-    connectionCount = jsonObj["conns"];
-    messagesReceived = jsonObj["msgRx"];
-    messagesSent = jsonObj["msgTx"];
-    messagesDropped = jsonObj["msgDrop"];
-
-    avgLatency = jsonObj["latency"];
-    packetLossRate = jsonObj["loss"];
-    throughput = jsonObj["throughput"];
-
-    alertFlags = jsonObj["alerts"];
-    lastError = jsonObj["lastErr"].as<TSTRING>();
-  }
-
-  JsonObject addTo(JsonObject&& jsonObj) const {
-    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
-
-    // Device Health
-    jsonObj["status"] = deviceStatus;
-    jsonObj["uptime"] = uptime;
-    jsonObj["mem"] = freeMemory;
-    jsonObj["wifi"] = wifiStrength;
-    jsonObj["fw"] = firmwareVersion;
-    jsonObj["fwMD5"] = firmwareMD5;
-
-    // Mesh Statistics
-    jsonObj["nodes"] = nodeCount;
-    jsonObj["conns"] = connectionCount;
-    jsonObj["msgRx"] = messagesReceived;
-    jsonObj["msgTx"] = messagesSent;
-    jsonObj["msgDrop"] = messagesDropped;
-
-    // Performance Metrics
-    jsonObj["latency"] = avgLatency;
-    jsonObj["loss"] = packetLossRate;
-    jsonObj["throughput"] = throughput;
-
-    // Alerts
-    jsonObj["alerts"] = alertFlags;
-    jsonObj["lastErr"] = lastError;
-
-    return jsonObj;
-  }
-
-#if ARDUINOJSON_VERSION_MAJOR < 7
-  size_t jsonObjectSize() const {
-    return JSON_OBJECT_SIZE(noJsonFields + 18) + firmwareVersion.length() +
-           firmwareMD5.length() + lastError.length();
-  }
-#endif
-};
-
-}  // namespace alteriom
-
-#endif  // ALTERIOM_SENSOR_PACKAGE_HPP

package/examples/alteriomPhase2/phase2_features.ino

@@ -1,186 +0,0 @@
-//************************************************************
-// Phase 2 Features Example
-//
-// This example demonstrates the two major Phase 2 features:
-// 1. Broadcast OTA (Option 1A) - True mesh-wide firmware distribution
-// 2. MQTT Status Bridge (Option 2E) - Professional monitoring
-//
-// Phase 2 builds on Phase 1's foundation:
-// - Phase 1: Compressed OTA + Enhanced Status
-// - Phase 2: Broadcast OTA + MQTT Status Bridge
-//
-// Broadcast OTA Benefits:
-// - Dramatically reduces network traffic (1 broadcast vs N unicasts)
-// - Faster distribution to large meshes (parallel vs sequential)
-// - Scales to 50+ nodes efficiently
-// - Backward compatible with Phase 1
-//
-// MQTT Status Bridge Benefits:
-// - Professional monitoring tools (Grafana, InfluxDB, Prometheus)
-// - Cloud integration via MQTT
-// - Real-time mesh visibility
-// - Automated alerting
-//************************************************************
-
-#include "painlessMesh.h"
-
-// Mesh configuration
-#define   MESH_PREFIX     "AlteriomMesh"
-#define   MESH_PASSWORD   "meshPassword123"
-#define   MESH_PORT       5555
-
-// OTA configuration
-#define   OTA_PART_SIZE   1024  // Chunk size for OTA transfers
-
-Scheduler userScheduler;
-painlessMesh mesh;
-
-// Prototypes
-void sendBroadcastOTA();
-void receivedCallback(uint32_t from, String& msg);
-void newConnectionCallback(uint32_t nodeId);
-void changedConnectionCallback();
-
-void setup() {
-  Serial.begin(115200);
-  Serial.println("\n\n=== Phase 2 Features Demo ===\n");
-  
-  mesh.setDebugMsgTypes(ERROR | STARTUP | CONNECTION);
-  mesh.init(MESH_PREFIX, MESH_PASSWORD, &userScheduler, MESH_PORT);
-  mesh.onReceive(&receivedCallback);
-  mesh.onNewConnection(&newConnectionCallback);
-  mesh.onChangedConnections(&changedConnectionCallback);
-  
-  Serial.println("Mesh initialized");
-  Serial.println("Phase 2 features:");
-  Serial.println("  1. Broadcast OTA - scales to 50+ nodes");
-  Serial.println("  2. MQTT Status Bridge - professional monitoring");
-  Serial.println();
-}
-
-void loop() {
-  mesh.update();
-}
-
-/**
- * Phase 2 Feature 1: Broadcast OTA
- * 
- * True mesh-wide broadcast distribution where firmware chunks
- * are broadcast to all nodes simultaneously, dramatically reducing
- * network traffic and improving update speed.
- * 
- * Key differences from Phase 1:
- * - Phase 1: Each node requests chunks individually (N unicasts)
- * - Phase 2: Root broadcasts chunks once to all nodes (1 broadcast)
- * 
- * Memory impact: +2-5KB per node for chunk tracking
- */
-void sendBroadcastOTA() {
-  #ifdef PAINLESSMESH_ENABLE_OTA
-  
-  Serial.println("\n=== Phase 2: Broadcast OTA ===");
-  
-  // Example firmware info
-  String firmwareMD5 = "phase2_broadcast_example_md5";
-  size_t numParts = 150;  // Number of firmware chunks
-  
-  // Phase 2: Enable both compression (Phase 1) AND broadcast (Phase 2)
-  // This is the most efficient combination for large meshes
-  auto otaTask = mesh.offerOTA(
-    "sensor",      // Role this firmware is for
-    "ESP32",       // Hardware type (ESP32 or ESP8266)
-    firmwareMD5,   // MD5 hash of firmware
-    numParts,      // Number of data chunks
-    false,         // Not forced (only update if different MD5)
-    true,          // *** BROADCAST MODE (Phase 2 feature) ***
-    true           // Compressed (Phase 1 feature for additional savings)
-  );
-  
-  Serial.println("Broadcast OTA announced!");
-  Serial.println();
-  Serial.println("Phase 2 Broadcast Mode:");
-  Serial.println("  - Root node broadcasts each chunk ONCE");
-  Serial.println("  - All nodes receive chunks simultaneously");
-  Serial.println("  - Dramatically reduced network traffic");
-  Serial.println("  - Scales efficiently to 50+ nodes");
-  Serial.println();
-  Serial.println("Combined with Phase 1 Compression:");
-  Serial.println("  - 40-60% bandwidth reduction per chunk");
-  Serial.println("  - Faster distribution across large meshes");
-  Serial.println("  - Lower energy consumption");
-  Serial.println();
-  Serial.println("Expected performance for 50-node mesh:");
-  Serial.println("  - Without broadcast: 50 unicast transmissions per chunk");
-  Serial.println("  - With broadcast: 1 broadcast per chunk");
-  Serial.println("  - Network load reduction: ~98%");
-  Serial.println();
-  Serial.println("Architecture:");
-  Serial.println("  Root Node:");
-  Serial.println("    ├─> Broadcast: Announce(firmware_info)");
-  Serial.println("    ├─> Broadcast: Data(chunk_0)");
-  Serial.println("    ├─> Broadcast: Data(chunk_1)");
-  Serial.println("    └─> ... continues for all chunks");
-  Serial.println("  ");
-  Serial.println("  All Nodes:");
-  Serial.println("    ├─> Listen for broadcast announcements");
-  Serial.println("    ├─> Receive and cache chunks as they arrive");
-  Serial.println("    ├─> Assemble firmware from cached chunks");
-  Serial.println("    └─> Reboot into new firmware when complete");
-  
-  #else
-  Serial.println("OTA not enabled. Define PAINLESSMESH_ENABLE_OTA");
-  #endif
-}
-
-/**
- * Callback when messages are received
- */
-void receivedCallback(uint32_t from, String& msg) {
-  Serial.printf("Received from %u: %s\n", from, msg.c_str());
-}
-
-void newConnectionCallback(uint32_t nodeId) {
-  Serial.printf("New connection: %u\n", nodeId);
-  Serial.printf("Total nodes in mesh: %d\n", mesh.getNodeList().size() + 1);
-}
-
-void changedConnectionCallback() {
-  Serial.println("Connections changed");
-  Serial.printf("Total nodes: %d\n", mesh.getNodeList().size() + 1);
-}
-
-/**
- * Phase 2 Benefits Summary:
- * 
- * 1. Broadcast OTA (Option 1A):
- *    - Scales to 50-100 node meshes
- *    - ~98% reduction in network traffic vs unicast
- *    - Parallel distribution to all nodes
- *    - Maintains backward compatibility
- *    - Memory overhead: +2-5KB per node
- * 
- * 2. MQTT Status Bridge (Option 2E):
- *    - Professional monitoring tools integration
- *    - Real-time mesh visibility via MQTT topics
- *    - Grafana/InfluxDB dashboards
- *    - Prometheus metrics collection
- *    - Home Assistant automation
- *    - Cloud-ready architecture
- *    - Configurable publish intervals
- *    - Multiple topic streams (nodes, topology, metrics, alerts)
- * 
- * When to use Phase 2:
- * - Meshes with 10+ nodes (broadcast efficiency kicks in)
- * - Production deployments requiring monitoring
- * - Systems needing cloud integration
- * - Enterprise environments with existing monitoring tools
- * - Large-scale deployments (50+ nodes)
- * 
- * Migration from Phase 1:
- * - Broadcast OTA: Just set broadcasted=true in offerOTA()
- * - MQTT Bridge: Include mqtt_status_bridge.hpp and configure
- * - Both features are fully backward compatible
- * - Can be deployed incrementally
- * 
- * Next: Phase 3 features (progressive rollout + telemetry streams)
- */