@alteriom/painlessmesh 1.8.15 → 1.9.0

package/examples/alteriomMetricsHealth/metrics_health_node.ino

@@ -1,429 +0,0 @@
-/**
- * Alteriom Metrics and Health Monitoring Node
- * 
- * This example demonstrates the new MetricsPackage (Type 204) and 
- * HealthCheckPackage (Type 605) introduced in painlessMesh v1.7.7.
- * 
- * Features:
- * - Comprehensive performance metrics collection
- * - Proactive health monitoring with problem detection
- * - Configurable collection intervals
- * - Alert threshold detection
- * - Memory leak detection
- * - Network quality monitoring
- * 
- * Hardware: ESP32 or ESP8266
- */
-
-#include "painlessMesh.h"
-#include "alteriom_sensor_package.hpp"
-
-using namespace alteriom;
-
-// Mesh Configuration
-#define MESH_PREFIX     "AlteriomMesh"
-#define MESH_PASSWORD   "your_password"
-#define MESH_PORT       5555
-
-// Collection Intervals (milliseconds)
-#define METRICS_INTERVAL   30000  // 30 seconds
-#define HEALTH_INTERVAL    60000  // 60 seconds
-
-Scheduler userScheduler;
-painlessMesh mesh;
-
-// Tasks
-Task taskSendMetrics(METRICS_INTERVAL, TASK_FOREVER, &sendMetrics);
-Task taskSendHealth(HEALTH_INTERVAL, TASK_FOREVER, &sendHealthCheck);
-
-// Metrics tracking
-uint32_t loopCount = 0;
-uint32_t lastLoopCount = 0;
-uint32_t lastMetricsTime = 0;
-uint32_t maxLoopDuration = 0;
-uint32_t loopStartTime = 0;
-
-// Network statistics
-uint32_t totalBytesRx = 0;
-uint32_t totalBytesTx = 0;
-uint32_t totalPacketsRx = 0;
-uint32_t totalPacketsTx = 0;
-uint32_t packetsDropped = 0;
-
-// Health tracking
-uint32_t minHeapEverSeen = 0xFFFFFFFF;
-uint32_t previousHeap = 0;
-uint32_t memoryCheckCount = 0;
-int32_t memoryTrendAccumulator = 0;
-uint16_t reconnectionCount = 0;
-
-void setup() {
-  Serial.begin(115200);
-  Serial.println("\n\n=== Alteriom Metrics & Health Monitoring Node ===");
-  Serial.println("painlessMesh v1.7.7 - Type 204, 604 & 605 Packages");
-  
-  // Initialize mesh
-  mesh.setDebugMsgTypes(ERROR | STARTUP | CONNECTION);
-  mesh.init(MESH_PREFIX, MESH_PASSWORD, &userScheduler, MESH_PORT);
-  
-  // Set up callbacks
-  mesh.onReceive(&receivedCallback);
-  mesh.onNewConnection(&newConnectionCallback);
-  mesh.onChangedConnections(&changedConnectionCallback);
-  mesh.onDroppedConnection(&droppedConnectionCallback);
-  
-  // Add tasks to scheduler
-  userScheduler.addTask(taskSendMetrics);
-  userScheduler.addTask(taskSendHealth);
-  
-  taskSendMetrics.enable();
-  taskSendHealth.enable();
-  
-  // Initialize tracking
-  lastMetricsTime = millis();
-  minHeapEverSeen = ESP.getFreeHeap();
-  previousHeap = minHeapEverSeen;
-  
-  Serial.printf("Node ID: %u\n", mesh.getNodeId());
-  Serial.printf("Free Heap: %u bytes\n", ESP.getFreeHeap());
-  Serial.println("Setup complete!");
-}
-
-void loop() {
-  loopStartTime = micros();
-  loopCount++;
-  
-  mesh.update();
-  
-  // Track maximum loop duration
-  uint32_t loopDuration = micros() - loopStartTime;
-  if (loopDuration > maxLoopDuration) {
-    maxLoopDuration = loopDuration;
-  }
-}
-
-void sendMetrics() {
-  Serial.println("\n--- Sending Metrics Package ---");
-  
-  MetricsPackage metrics;
-  metrics.from = mesh.getNodeId();
-  
-  // Calculate time since last metrics
-  uint32_t now = millis();
-  uint32_t timeDelta = now - lastMetricsTime;
-  if (timeDelta == 0) timeDelta = 1;  // Prevent division by zero
-  
-  // CPU and Processing
-  metrics.loopIterations = ((loopCount - lastLoopCount) * 1000) / timeDelta;
-  metrics.cpuUsage = calculateCPUUsage();
-  // Note: TaskScheduler doesn't provide a size() method, so we'll use 0 or estimate
-  metrics.taskQueueSize = 0;  // TaskScheduler API doesn't expose queue size
-  
-  // Memory Metrics
-  metrics.freeHeap = ESP.getFreeHeap();
-  metrics.minFreeHeap = minHeapEverSeen;
-#ifdef ESP32
-  metrics.heapFragmentation = 0;  // ESP32 doesn't provide fragmentation
-  metrics.maxAllocHeap = ESP.getMaxAllocHeap();
-#else
-  metrics.heapFragmentation = ESP.getHeapFragmentation();
-  metrics.maxAllocHeap = ESP.getMaxFreeBlockSize();
-#endif
-  
-  // Update minimum heap tracking
-  if (metrics.freeHeap < minHeapEverSeen) {
-    minHeapEverSeen = metrics.freeHeap;
-  }
-  
-  // Network Performance
-  metrics.bytesReceived = totalBytesRx;
-  metrics.bytesSent = totalBytesTx;
-  metrics.packetsReceived = totalPacketsRx;
-  metrics.packetsSent = totalPacketsTx;
-  metrics.packetsDropped = packetsDropped;
-  metrics.currentThroughput = ((totalBytesRx + totalBytesTx) * 1000) / timeDelta;
-  
-  // Timing and Latency
-  metrics.avgResponseTime = mesh.getNodeTime() % 1000000;  // Mock value
-  metrics.maxResponseTime = maxLoopDuration;
-  metrics.avgMeshLatency = 25;  // Would need to calculate from actual delays
-  
-  // Connection Quality
-  metrics.connectionQuality = calculateConnectionQuality();
-  metrics.wifiRSSI = WiFi.RSSI();
-  
-  // Metadata
-  metrics.collectionTimestamp = mesh.getNodeTime();
-  metrics.collectionInterval = METRICS_INTERVAL;
-  
-  // Serialize and send the metrics
-  JsonDocument doc;
-  JsonObject obj = doc.to<JsonObject>();
-  metrics.addTo(std::move(obj));
-  
-  String msg;
-  serializeJson(doc, msg);
-  bool sent = mesh.sendBroadcast(msg);
-  
-  if (sent) {
-    Serial.println("Metrics sent successfully");
-    Serial.printf("  CPU: %d%%, Loops/sec: %u\n", metrics.cpuUsage, metrics.loopIterations);
-    Serial.printf("  Free Heap: %u bytes, Min: %u bytes\n", metrics.freeHeap, metrics.minFreeHeap);
-    Serial.printf("  Throughput: %u bytes/sec\n", metrics.currentThroughput);
-    Serial.printf("  WiFi RSSI: %d dBm\n", metrics.wifiRSSI);
-  } else {
-    Serial.println("ERROR: Failed to send metrics");
-    packetsDropped++;
-  }
-  
-  // Update tracking
-  lastLoopCount = loopCount;
-  lastMetricsTime = now;
-  maxLoopDuration = 0;
-}
-
-void sendHealthCheck() {
-  Serial.println("\n--- Sending Health Check Package ---");
-  
-  HealthCheckPackage health;
-  health.from = mesh.getNodeId();
-  
-  // Collect health metrics
-  uint32_t freeHeap = ESP.getFreeHeap();
-  uint8_t memHealth = calculateMemoryHealth(freeHeap);
-  uint8_t netHealth = calculateNetworkHealth();
-  uint8_t perfHealth = calculatePerformanceHealth();
-  
-  // Overall health status (0=critical, 1=warning, 2=healthy)
-  if (memHealth < 30 || netHealth < 30 || perfHealth < 30) {
-    health.healthStatus = 0;  // Critical
-  } else if (memHealth < 60 || netHealth < 60 || perfHealth < 60) {
-    health.healthStatus = 1;  // Warning
-  } else {
-    health.healthStatus = 2;  // Healthy
-  }
-  
-  // Problem flags
-  health.problemFlags = 0;
-  if (memHealth < 60) health.problemFlags |= 0x0001;  // Low memory
-  if (perfHealth < 60) health.problemFlags |= 0x0002;  // High CPU
-  if (netHealth < 60) health.problemFlags |= 0x0004;  // Connection instability
-  if (packetsDropped > 0) health.problemFlags |= 0x0008;  // High packet loss
-  
-  // Memory Health
-  health.memoryHealth = memHealth;
-  
-  // Calculate memory trend (bytes per hour)
-  if (memoryCheckCount > 0) {
-    int32_t memoryDelta = (int32_t)previousHeap - (int32_t)freeHeap;
-    memoryTrendAccumulator += memoryDelta;
-    health.memoryTrend = (memoryTrendAccumulator * 3600000) / (HEALTH_INTERVAL * memoryCheckCount);
-  }
-  previousHeap = freeHeap;
-  memoryCheckCount++;
-  
-  // Network Health
-  health.networkHealth = netHealth;
-  health.packetLossPercent = calculatePacketLoss();
-  health.reconnectionCount = reconnectionCount;
-  
-  // Performance Health
-  health.performanceHealth = perfHealth;
-  health.missedDeadlines = 0;  // Would need task scheduler integration
-  health.maxLoopTime = maxLoopDuration / 1000;  // Convert to ms
-  
-  // Environmental (if available)
-#ifdef TEMP_SENSOR_PIN
-  health.temperature = readTemperature();
-  health.temperatureHealth = calculateTemperatureHealth(health.temperature);
-#else
-  health.temperature = 0;
-  health.temperatureHealth = 100;
-#endif
-  
-  // Uptime and Stability
-  health.uptime = millis() / 1000;
-  health.crashCount = 0;  // Would need EEPROM tracking
-  health.lastRebootReason = 1;  // Normal startup
-  
-  // Predictive indicators
-  if (health.memoryTrend > 0 && freeHeap > health.memoryTrend) {
-    health.estimatedTimeToFailure = (freeHeap / health.memoryTrend);
-  } else {
-    health.estimatedTimeToFailure = 0;  // Unknown
-  }
-  
-  // Recommendations
-  if (health.healthStatus == 0) {
-    health.recommendations = "CRITICAL: Immediate attention required";
-  } else if (health.healthStatus == 1) {
-    if (memHealth < 60) {
-      health.recommendations = "Increase memory allocation or reduce message frequency";
-    } else if (netHealth < 60) {
-      health.recommendations = "Check network connections and reduce interference";
-    } else {
-      health.recommendations = "Monitor performance closely";
-    }
-  } else {
-    health.recommendations = "System operating normally";
-  }
-  
-  // Metadata
-  health.checkTimestamp = mesh.getNodeTime();
-  health.nextCheckDue = health.checkTimestamp + (HEALTH_INTERVAL * 1000);
-  
-  // Serialize and send the health check
-  JsonDocument doc;
-  JsonObject obj = doc.to<JsonObject>();
-  health.addTo(std::move(obj));
-  
-  String msg;
-  serializeJson(doc, msg);
-  bool sent = mesh.sendBroadcast(msg);
-  
-  if (sent) {
-    Serial.println("Health check sent successfully");
-    Serial.printf("  Overall Health: %s (Status: %d)\n", 
-                  health.healthStatus == 2 ? "HEALTHY" : 
-                  health.healthStatus == 1 ? "WARNING" : "CRITICAL",
-                  health.healthStatus);
-    Serial.printf("  Memory Health: %d%%, Network Health: %d%%, Performance: %d%%\n",
-                  health.memoryHealth, health.networkHealth, health.performanceHealth);
-    if (health.problemFlags > 0) {
-      Serial.printf("  Problem Flags: 0x%04X\n", health.problemFlags);
-    }
-    Serial.printf("  Memory Trend: %d bytes/hour\n", health.memoryTrend);
-    if (health.estimatedTimeToFailure > 0) {
-      Serial.printf("  Est. Time to Failure: %d hours\n", health.estimatedTimeToFailure);
-    }
-    Serial.printf("  Recommendations: %s\n", health.recommendations.c_str());
-  } else {
-    Serial.println("ERROR: Failed to send health check");
-    packetsDropped++;
-  }
-}
-
-// Utility functions for health calculations
-uint8_t calculateCPUUsage() {
-  // Simplified CPU usage estimation based on loop execution
-  // In reality, this would need more sophisticated timing
-  uint32_t loopsPerSec = (loopCount - lastLoopCount) * 1000 / (millis() - lastMetricsTime);
-  if (loopsPerSec > 10000) return 20;  // Low usage
-  if (loopsPerSec > 5000) return 40;
-  if (loopsPerSec > 2000) return 60;
-  if (loopsPerSec > 1000) return 80;
-  return 95;  // High usage
-}
-
-uint8_t calculateConnectionQuality() {
-  int8_t rssi = WiFi.RSSI();
-  uint8_t lossPercent = calculatePacketLoss();
-  
-  // Quality based on RSSI (0-50 points)
-  uint8_t rssiScore = 0;
-  if (rssi > -50) rssiScore = 50;
-  else if (rssi > -70) rssiScore = 40;
-  else if (rssi > -80) rssiScore = 30;
-  else if (rssi > -90) rssiScore = 20;
-  else rssiScore = 10;
-  
-  // Quality based on packet loss (0-50 points)
-  uint8_t lossScore = 50 - (lossPercent / 2);
-  if (lossScore < 0) lossScore = 0;
-  
-  return rssiScore + lossScore;
-}
-
-uint8_t calculateMemoryHealth(uint32_t freeHeap) {
-#ifdef ESP32
-  uint32_t totalHeap = ESP.getHeapSize();
-#else
-  uint32_t totalHeap = 81920;  // ESP8266 ~80KB
-#endif
-  
-  uint8_t heapPercent = (freeHeap * 100) / totalHeap;
-  
-  if (heapPercent > 60) return 100;
-  if (heapPercent > 40) return 80;
-  if (heapPercent > 20) return 50;
-  if (heapPercent > 10) return 30;
-  return 10;
-}
-
-uint8_t calculateNetworkHealth() {
-  uint8_t connectionCount = mesh.getNodeList().size();
-  uint8_t lossPercent = calculatePacketLoss();
-  
-  // Good if we have connections and low packet loss
-  if (connectionCount > 0 && lossPercent < 5) return 100;
-  if (connectionCount > 0 && lossPercent < 10) return 80;
-  if (connectionCount > 0 && lossPercent < 20) return 60;
-  if (connectionCount > 0) return 40;
-  return 20;  // No connections
-}
-
-uint8_t calculatePerformanceHealth() {
-  // Based on loop performance
-  if (maxLoopDuration < 10000) return 100;    // < 10ms excellent
-  if (maxLoopDuration < 50000) return 80;     // < 50ms good
-  if (maxLoopDuration < 100000) return 60;    // < 100ms fair
-  if (maxLoopDuration < 200000) return 40;    // < 200ms poor
-  return 20;  // Very poor
-}
-
-uint8_t calculatePacketLoss() {
-  uint32_t totalPackets = totalPacketsTx + totalPacketsRx;
-  if (totalPackets == 0) return 0;
-  return (packetsDropped * 100) / totalPackets;
-}
-
-// Mesh callbacks
-void receivedCallback(uint32_t from, String& msg) {
-  totalBytesRx += msg.length();
-  totalPacketsRx++;
-  
-  // Parse message type
-  JsonDocument doc;
-  deserializeJson(doc, msg);
-  JsonObject obj = doc.as<JsonObject>();
-  uint16_t msgType = obj["type"];
-  
-  Serial.printf("\nReceived Type %d from %u\n", msgType, from);
-  
-  switch(msgType) {
-    case 200:  // SensorPackage
-      Serial.println("  -> Sensor data");
-      break;
-    case 400:  // CommandPackage (COMMAND per schema v0.7.2+)
-      Serial.println("  -> Command");
-      break;
-    case 202:  // StatusPackage
-      Serial.println("  -> Status");
-      break;
-    case 604:  // EnhancedStatusPackage (MESH_STATUS per schema v0.7.2+)
-      Serial.println("  -> Enhanced Status");
-      break;
-    case 204:  // MetricsPackage (SENSOR_METRICS per schema v0.7.2+)
-      Serial.println("  -> Metrics");
-      break;
-    case 605:  // HealthCheckPackage (MESH_METRICS per schema v0.7.2+)
-      Serial.println("  -> Health Check");
-      break;
-    default:
-      Serial.println("  -> Unknown type");
-  }
-}
-
-void newConnectionCallback(uint32_t nodeId) {
-  Serial.printf("\nNew Connection: %u\n", nodeId);
-  Serial.printf("Total nodes: %d\n", mesh.getNodeList().size() + 1);
-}
-
-void changedConnectionCallback() {
-  Serial.println("\nMesh topology changed");
-}
-
-void droppedConnectionCallback(uint32_t nodeId) {
-  Serial.printf("\nConnection dropped: %u\n", nodeId);
-  reconnectionCount++;
-}

package/examples/alteriomMetricsHealth/platformio.ini

@@ -1,26 +0,0 @@
-[platformio]
-src_dir = .
-
-[env]
-lib_deps =
-    bblanchon/ArduinoJson
-    arkhipenko/TaskScheduler
-
-lib_ldf_mode = deep+
-[env:esp8266]
-platform = espressif8266
-board = nodemcuv2
-framework = arduino
-lib_extra_dirs = ../../  ; Load the local copy of painlessmesh. For your own example add painlessmesh to the lib_deps
-lib_deps =
-    ${env.lib_deps}  ; Inherit common dependencies
-    esp32async/ESPAsyncTCP@^2.0.0  ; Only for ESP8266
-
-[env:esp32]
-platform = espressif32
-board = esp32dev
-framework = arduino
-lib_extra_dirs = ../../  ; Load the local copy of painlessmesh. For your own example add painlessmesh to the lib_deps
-lib_deps =
-    ${env.lib_deps}  ; Inherit common dependencies
-    esp32async/AsyncTCP

package/examples/alteriomPhase1/alteriom_sensor_package.hpp

@@ -1,224 +0,0 @@
-#ifndef ALTERIOM_SENSOR_PACKAGE_HPP
-#define ALTERIOM_SENSOR_PACKAGE_HPP
-
-#include "painlessmesh/plugin.hpp"
-
-namespace alteriom {
-
-/**
- * @brief Sensor data package for broadcasting environmental measurements
- *
- * This package is designed for Alteriom's IoT sensor network requirements,
- * allowing nodes to share environmental data across the mesh.
- */
-class SensorPackage : public painlessmesh::plugin::BroadcastPackage {
- public:
-  double temperature = 0.0;  // Temperature in Celsius
-  double humidity = 0.0;     // Relative humidity percentage
-  double pressure = 0.0;     // Atmospheric pressure in hPa
-  uint32_t sensorId = 0;     // Unique sensor identifier
-  uint32_t timestamp = 0;    // Unix timestamp of measurement
-  uint8_t batteryLevel = 0;  // Battery level percentage
-
-  SensorPackage()
-      : BroadcastPackage(200) {}  // Type ID 200 for Alteriom sensors
-
-  SensorPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
-    temperature = jsonObj["temp"];
-    humidity = jsonObj["hum"];
-    pressure = jsonObj["press"];
-    sensorId = jsonObj["sid"];
-    timestamp = jsonObj["ts"];
-    batteryLevel = jsonObj["bat"];
-  }
-
-  JsonObject addTo(JsonObject&& jsonObj) const {
-    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
-    jsonObj["temp"] = temperature;
-    jsonObj["hum"] = humidity;
-    jsonObj["press"] = pressure;
-    jsonObj["sid"] = sensorId;
-    jsonObj["ts"] = timestamp;
-    jsonObj["bat"] = batteryLevel;
-    return jsonObj;
-  }
-
-#if ARDUINOJSON_VERSION_MAJOR < 7
-  size_t jsonObjectSize() const { return JSON_OBJECT_SIZE(noJsonFields + 6); }
-#endif
-};
-
-/**
- * @brief Command package for controlling Alteriom devices
- *
- * Single-destination package for sending specific commands to individual nodes.
- */
-class CommandPackage : public painlessmesh::plugin::SinglePackage {
- public:
-  uint8_t command = 0;        // Command type
-  uint32_t targetDevice = 0;  // Target device ID
-  TSTRING parameters = "";    // Command parameters as JSON string
-  uint32_t commandId = 0;     // Unique command identifier for tracking
-
-  CommandPackage() : SinglePackage(400) {}  // Type ID 201 for Alteriom commands
-
-  CommandPackage(JsonObject jsonObj) : SinglePackage(jsonObj) {
-    command = jsonObj["cmd"];
-    targetDevice = jsonObj["target"];
-    parameters = jsonObj["params"].as<TSTRING>();
-    commandId = jsonObj["cid"];
-  }
-
-  JsonObject addTo(JsonObject&& jsonObj) const {
-    jsonObj = SinglePackage::addTo(std::move(jsonObj));
-    jsonObj["cmd"] = command;
-    jsonObj["target"] = targetDevice;
-    jsonObj["params"] = parameters;
-    jsonObj["cid"] = commandId;
-    return jsonObj;
-  }
-
-#if ARDUINOJSON_VERSION_MAJOR < 7
-  size_t jsonObjectSize() const {
-    return JSON_OBJECT_SIZE(noJsonFields + 4) + parameters.length();
-  }
-#endif
-};
-
-/**
- * @brief Status report package for device health monitoring
- */
-class StatusPackage : public painlessmesh::plugin::BroadcastPackage {
- public:
-  uint8_t deviceStatus = 0;      // Device status flags
-  uint32_t uptime = 0;           // Device uptime in seconds
-  uint16_t freeMemory = 0;       // Free memory in KB
-  uint8_t wifiStrength = 0;      // WiFi signal strength
-  TSTRING firmwareVersion = "";  // Current firmware version
-
-  StatusPackage() : BroadcastPackage(202) {}  // Type ID 202 for Alteriom status
-
-  StatusPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
-    deviceStatus = jsonObj["status"];
-    uptime = jsonObj["uptime"];
-    freeMemory = jsonObj["mem"];
-    wifiStrength = jsonObj["wifi"];
-    firmwareVersion = jsonObj["fw"].as<TSTRING>();
-  }
-
-  JsonObject addTo(JsonObject&& jsonObj) const {
-    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
-    jsonObj["status"] = deviceStatus;
-    jsonObj["uptime"] = uptime;
-    jsonObj["mem"] = freeMemory;
-    jsonObj["wifi"] = wifiStrength;
-    jsonObj["fw"] = firmwareVersion;
-    return jsonObj;
-  }
-
-#if ARDUINOJSON_VERSION_MAJOR < 7
-  size_t jsonObjectSize() const {
-    return JSON_OBJECT_SIZE(noJsonFields + 5) + firmwareVersion.length();
-  }
-#endif
-};
-
-/**
- * @brief Enhanced status package with comprehensive health metrics (Phase 1)
- *
- * This is an extended version of StatusPackage that includes additional
- * mesh statistics, performance metrics, and alerting capabilities.
- * Type ID 203 is used to distinguish from the basic StatusPackage (202).
- */
-class EnhancedStatusPackage : public painlessmesh::plugin::BroadcastPackage {
- public:
-  // Device Health (from original StatusPackage)
-  uint8_t deviceStatus = 0;      // Device status flags
-  uint32_t uptime = 0;           // Device uptime in seconds
-  uint16_t freeMemory = 0;       // Free memory in KB
-  uint8_t wifiStrength = 0;      // WiFi signal strength
-  TSTRING firmwareVersion = "";  // Current firmware version
-  TSTRING firmwareMD5 = "";      // Firmware hash for OTA verification
-
-  // Mesh Statistics
-  uint16_t nodeCount = 0;         // Number of known nodes in mesh
-  uint8_t connectionCount = 0;    // Number of direct connections
-  uint32_t messagesReceived = 0;  // Total messages received
-  uint32_t messagesSent = 0;      // Total messages sent
-  uint32_t messagesDropped = 0;   // Total messages dropped/failed
-
-  // Performance Metrics
-  uint16_t avgLatency = 0;     // Average message latency in ms
-  uint8_t packetLossRate = 0;  // Packet loss rate percentage (0-100)
-  uint16_t throughput = 0;     // Network throughput in bytes/sec
-
-  // Warnings/Alerts
-  uint8_t alertFlags = 0;  // Bit flags for various alert conditions
-  TSTRING lastError = "";  // Last error message for diagnostics
-
-  EnhancedStatusPackage()
-      : BroadcastPackage(203) {}  // Type ID 203 for enhanced status
-
-  EnhancedStatusPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
-    deviceStatus = jsonObj["status"];
-    uptime = jsonObj["uptime"];
-    freeMemory = jsonObj["mem"];
-    wifiStrength = jsonObj["wifi"];
-    firmwareVersion = jsonObj["fw"].as<TSTRING>();
-    firmwareMD5 = jsonObj["fwMD5"].as<TSTRING>();
-
-    nodeCount = jsonObj["nodes"];
-    connectionCount = jsonObj["conns"];
-    messagesReceived = jsonObj["msgRx"];
-    messagesSent = jsonObj["msgTx"];
-    messagesDropped = jsonObj["msgDrop"];
-
-    avgLatency = jsonObj["latency"];
-    packetLossRate = jsonObj["loss"];
-    throughput = jsonObj["throughput"];
-
-    alertFlags = jsonObj["alerts"];
-    lastError = jsonObj["lastErr"].as<TSTRING>();
-  }
-
-  JsonObject addTo(JsonObject&& jsonObj) const {
-    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
-
-    // Device Health
-    jsonObj["status"] = deviceStatus;
-    jsonObj["uptime"] = uptime;
-    jsonObj["mem"] = freeMemory;
-    jsonObj["wifi"] = wifiStrength;
-    jsonObj["fw"] = firmwareVersion;
-    jsonObj["fwMD5"] = firmwareMD5;
-
-    // Mesh Statistics
-    jsonObj["nodes"] = nodeCount;
-    jsonObj["conns"] = connectionCount;
-    jsonObj["msgRx"] = messagesReceived;
-    jsonObj["msgTx"] = messagesSent;
-    jsonObj["msgDrop"] = messagesDropped;
-
-    // Performance Metrics
-    jsonObj["latency"] = avgLatency;
-    jsonObj["loss"] = packetLossRate;
-    jsonObj["throughput"] = throughput;
-
-    // Alerts
-    jsonObj["alerts"] = alertFlags;
-    jsonObj["lastErr"] = lastError;
-
-    return jsonObj;
-  }
-
-#if ARDUINOJSON_VERSION_MAJOR < 7
-  size_t jsonObjectSize() const {
-    return JSON_OBJECT_SIZE(noJsonFields + 18) + firmwareVersion.length() +
-           firmwareMD5.length() + lastError.length();
-  }
-#endif
-};
-
-}  // namespace alteriom
-
-#endif  // ALTERIOM_SENSOR_PACKAGE_HPP