@alteriom/painlessmesh 1.8.15 → 1.9.0

package/examples/multi_bridge/secondary_bridge.ino

@@ -1,123 +0,0 @@
-//************************************************************
-// Multi-Bridge Example: Secondary Bridge Node
-//
-// This example demonstrates a secondary bridge (priority 5) in a
-// multi-bridge deployment. This provides hot standby redundancy
-// and can handle load if the primary bridge is busy.
-//
-// Features demonstrated:
-// - Secondary bridge with medium priority
-// - Hot standby mode (always ready)
-// - Automatic failover if primary fails
-// - Load balancing support
-//************************************************************
-
-#include "painlessMesh.h"
-
-#define MESH_PREFIX     "MultiBridgeMesh"
-#define MESH_PASSWORD   "meshpassword"
-#define MESH_PORT       5555
-
-// Secondary router connection (backup Internet or different ISP)
-#define ROUTER_SSID     "SecondaryRouter"
-#define ROUTER_PASSWORD "routerpass2"
-
-Scheduler userScheduler;
-painlessMesh mesh;
-
-// Task to display bridge coordination status
-Task taskBridgeStatus(10000, TASK_FOREVER, [](){
-  Serial.println("\n=== Secondary Bridge Status ===");
-  Serial.printf("Node ID: %u\n", mesh.getNodeId());
-  Serial.printf("Connected Nodes: %d\n", mesh.getNodeList().size());
-  
-  // Show all active bridges in the mesh
-  auto activeBridges = mesh.getActiveBridges();
-  Serial.printf("Active Bridges: %d\n", activeBridges.size());
-  for (auto bridgeId : activeBridges) {
-    Serial.printf("  - Bridge: %u%s\n", bridgeId, 
-                  (bridgeId == mesh.getNodeId()) ? " (ME)" : "");
-  }
-  
-  // Show recommended bridge for next message
-  uint32_t recommended = mesh.getRecommendedBridge();
-  Serial.printf("Recommended Bridge: %u\n", recommended);
-  
-  if (recommended == mesh.getNodeId()) {
-    Serial.println("⚠️  I AM THE ACTIVE BRIDGE (primary likely failed!)");
-  } else {
-    Serial.println("✓ Standby mode - primary bridge is active");
-  }
-  Serial.println("=============================\n");
-});
-
-void receivedCallback(uint32_t from, String& msg) {
-  Serial.printf("Received from %u: %s\n", from, msg.c_str());
-}
-
-void newConnectionCallback(uint32_t nodeId) {
-  Serial.printf("New Connection, nodeId = %u\n", nodeId);
-}
-
-void changedConnectionCallback() {
-  Serial.printf("Changed connections. Node count: %d\n", mesh.getNodeList().size());
-}
-
-void bridgeStatusCallback(uint32_t bridgeNodeId, bool hasInternet) {
-  if (hasInternet) {
-    Serial.printf("✓ Bridge %u: Internet connected\n", bridgeNodeId);
-  } else {
-    Serial.printf("⚠️ Bridge %u: Internet OFFLINE\n", bridgeNodeId);
-  }
-}
-
-void setup() {
-  Serial.begin(115200);
-  delay(2000);
-  
-  Serial.println("\n\n=== Multi-Bridge: SECONDARY BRIDGE ===\n");
-  
-  // Initialize mesh as secondary bridge with priority 5
-  mesh.setDebugMsgTypes(ERROR | STARTUP | CONNECTION);
-  
-  // Enable multi-bridge coordination mode
-  mesh.enableMultiBridge(true);
-  
-  // Set bridge selection strategy (PRIORITY_BASED is default)
-  mesh.setBridgeSelectionStrategy(painlessMesh::PRIORITY_BASED);
-  
-  // Initialize as bridge with priority 5 (secondary)
-  bool bridgeSuccess = mesh.initAsBridge(MESH_PREFIX, MESH_PASSWORD,
-                                         ROUTER_SSID, ROUTER_PASSWORD,
-                                         &userScheduler, MESH_PORT, 5);  // Priority 5 = Secondary
-  
-  if (!bridgeSuccess) {
-    Serial.println("✗ Failed to initialize as secondary bridge!");
-    Serial.println("Router unreachable - falling back to regular mesh node");
-    
-    // Fallback: Initialize as regular node
-    // Device will still participate in mesh, relying on other bridges
-    mesh.init(MESH_PREFIX, MESH_PASSWORD, &userScheduler, MESH_PORT);
-    
-    Serial.println("✓ Running as regular node - relying on other bridges for connectivity");
-    Serial.println("Note: Fix router connectivity and restart to resume bridge role");
-  }
-  
-  mesh.onReceive(&receivedCallback);
-  mesh.onNewConnection(&newConnectionCallback);
-  mesh.onChangedConnections(&changedConnectionCallback);
-  mesh.onBridgeStatusChanged(&bridgeStatusCallback);
-  
-  // Add status reporting task
-  userScheduler.addTask(taskBridgeStatus);
-  taskBridgeStatus.enable();
-  
-  Serial.println("\n=== Secondary Bridge Ready ===");
-  Serial.println("This node is the SECONDARY bridge (Priority 5)");
-  Serial.println("It operates in hot standby mode");
-  Serial.println("Will take over if primary bridge fails\n");
-}
-
-void loop() {
-  mesh.update();
-}