@alteriom/painlessmesh 1.8.15 → 1.9.0

package/examples/mqttTopologyTest/mqttTopologyTest.ino

@@ -1,754 +0,0 @@
-/**
- * @file mqttTopologyTest.ino
- * @brief Hardware test sketch for painlessMesh topology reporting with MQTT
- * 
- * This sketch tests mesh topology reporting according to @alteriom/mqtt-schema v0.5.0
- * 
- * HARDWARE REQUIREMENTS:
- * - 3x ESP32 boards (or ESP8266, but ESP32 recommended)
- * - MQTT broker accessible on network (e.g., Mosquitto)
- * - USB cables for programming and Serial monitoring
- * 
- * TEST CONFIGURATION:
- * - Node 1: Gateway (this sketch with IS_GATEWAY = true)
- * - Node 2: Sensor node (this sketch with IS_GATEWAY = false, role = "sensor")
- * - Node 3: Repeater node (this sketch with IS_GATEWAY = false, role = "repeater")
- * 
- * MQTT TOPICS TESTED:
- * - alteriom/mesh/MESH-001/topology (full topology every 60s, incremental every 5s)
- * - alteriom/mesh/MESH-001/events (node join/leave events)
- * - alteriom/mesh/MESH-001/topology/response (GET_TOPOLOGY command response)
- * - alteriom/mesh/MESH-001/command (receive GET_TOPOLOGY commands)
- * 
- * SCHEMA COMPLIANCE:
- * - Device ID format: ALT-XXXXXXXXXXXX (uppercase hex)
- * - Quality metrics: 0-100 range
- * - RSSI values: negative dBm
- * - Timestamps: ISO 8601 format
- * - Envelope fields: schema_version, device_id, device_type, timestamp, firmware_version
- * 
- * TEST PROCEDURE:
- * 1. Configure WiFi credentials (WIFI_SSID, WIFI_PASSWORD)
- * 2. Configure MQTT broker (MQTT_BROKER, MQTT_PORT)
- * 3. Flash Node 1 with IS_GATEWAY = true
- * 4. Flash Node 2 with IS_GATEWAY = false, NODE_ROLE = "sensor"
- * 5. Flash Node 3 with IS_GATEWAY = false, NODE_ROLE = "repeater"
- * 6. Open Serial monitors for all 3 nodes
- * 7. Wait for mesh formation (watch for "Node joined" messages)
- * 8. Verify full topology published every 60s
- * 9. Verify incremental updates on node join/leave
- * 10. Send GET_TOPOLOGY command and verify response
- * 
- * EXPECTED BEHAVIOR:
- * - All nodes join mesh within 30 seconds
- * - Gateway publishes full topology every 60 seconds
- * - Gateway publishes incremental updates within 5 seconds of node join/leave
- * - All messages conform to @alteriom/mqtt-schema v0.5.0
- * - Connection quality metrics are calculated correctly
- * 
- * @author Alteriom Development Team
- * @date October 14, 2025
- * @version 1.0.0
- */
-
-#include "painlessTaskOptions.h"  // Must be first to configure TaskScheduler
-#include <TaskScheduler.h>  // Required for LDF to find TaskScheduler dependency
-#include "painlessMesh.h"
-#ifdef ESP8266
-#include <ESP8266WiFi.h>
-#else
-#include <WiFi.h>
-#endif
-#include <PubSubClient.h>
-#include <ArduinoJson.h>
-
-// ============================================================================
-// CONFIGURATION - MODIFY THESE FOR YOUR SETUP
-// ============================================================================
-
-// Mesh Configuration
-#define MESH_PREFIX     "AlteriomMesh"
-#define MESH_PASSWORD   "alteriom2025"
-#define MESH_PORT       5555
-
-// WiFi Configuration (for gateway only)
-#define WIFI_SSID       "YourWiFiSSID"
-#define WIFI_PASSWORD   "YourWiFiPassword"
-
-// MQTT Configuration (for gateway only)
-#define MQTT_BROKER     "192.168.1.100"  // Your MQTT broker IP
-#define MQTT_PORT       1883
-#define MQTT_USER       ""  // Leave empty if no auth
-#define MQTT_PASS       ""  // Leave empty if no auth
-
-// Node Configuration - CHANGE THIS FOR EACH NODE
-#define IS_GATEWAY      true              // Set to false for sensor/repeater nodes
-#define NODE_ROLE       "gateway"         // "gateway", "sensor", or "repeater"
-#define MESH_ID         "MESH-001"
-#define FIRMWARE_VERSION "TEST 1.0.0"
-
-// Topology Publishing Configuration
-#define FULL_TOPOLOGY_INTERVAL    60000   // Full topology every 60 seconds
-#define INCREMENTAL_INTERVAL      5000    // Check for changes every 5 seconds
-#define COMMAND_CHECK_INTERVAL    1000    // Check for commands every 1 second
-
-// ============================================================================
-// GLOBAL OBJECTS
-// ============================================================================
-
-Scheduler userScheduler;
-painlessMesh mesh;
-
-#if IS_GATEWAY
-WiFiClient wifiClient;
-PubSubClient mqttClient(wifiClient);
-#endif
-
-// Task declarations
-Task taskSendFullTopology(FULL_TOPOLOGY_INTERVAL, TASK_FOREVER, &sendFullTopology);
-Task taskCheckIncrementalUpdate(INCREMENTAL_INTERVAL, TASK_FOREVER, &checkIncrementalUpdate);
-Task taskCheckCommands(COMMAND_CHECK_INTERVAL, TASK_FOREVER, &checkCommands);
-
-// Topology state tracking
-struct NodeState {
-  uint32_t nodeId;
-  String role;
-  bool online;
-  unsigned long lastSeen;
-  int connectionCount;
-};
-
-std::map<uint32_t, NodeState> lastTopology;
-unsigned long lastTopologyUpdate = 0;
-
-// ============================================================================
-// DEVICE ID GENERATION
-// ============================================================================
-
-/**
- * Generate Alteriom-compliant device ID from chip ID
- * Format: ALT-XXXXXXXXXXXX (uppercase hex)
- */
-String getDeviceId() {
-#ifdef ESP32
-  uint64_t chipid = ESP.getEfuseMac();  // ESP32 unique ID
-#else
-  uint32_t chipid = ESP.getChipId();    // ESP8266 chip ID
-#endif
-  char deviceId[17];
-  snprintf(deviceId, sizeof(deviceId), "ALT-%012llX", (uint64_t)chipid);
-  return String(deviceId);
-}
-
-// ============================================================================
-// ISO 8601 TIMESTAMP
-// ============================================================================
-
-/**
- * Get current timestamp in ISO 8601 format
- * Note: Uses mesh time, not real-world time (no NTP in this test)
- */
-String getTimestamp() {
-  uint32_t meshTime = mesh.getNodeTime();
-  // Convert microseconds to seconds
-  uint32_t seconds = meshTime / 1000000;
-  
-  // Simple ISO 8601 format (no actual date, just offset from boot)
-  char timestamp[30];
-  snprintf(timestamp, sizeof(timestamp), "2025-10-14T%02d:%02d:%02dZ", 
-           (seconds / 3600) % 24, 
-           (seconds / 60) % 60, 
-           seconds % 60);
-  return String(timestamp);
-}
-
-// ============================================================================
-// CONNECTION QUALITY CALCULATION
-// ============================================================================
-
-/**
- * Calculate connection quality (0-100) based on mesh metrics
- * This is a simplified calculation for testing
- */
-int calculateQuality(uint32_t nodeId) {
-  // In a real implementation, this would use:
-  // - RSSI measurements
-  // - Packet loss rate
-  // - Latency measurements
-  // For testing, we'll use a simulated value based on node ID
-  
-  // Simulate quality degradation with distance (hop count)
-  SimpleList<uint32_t> nodeList = mesh.getNodeList();
-  int nodeCount = nodeList.size();
-  
-  // Base quality: 95 for direct connections
-  int quality = 95;
-  
-  // Reduce quality based on mesh size (simulate congestion)
-  if (nodeCount > 3) quality -= (nodeCount - 3) * 5;
-  
-  // Add some variation based on node ID
-  quality -= (nodeId % 10);
-  
-  // Clamp to 0-100 range
-  return std::max(0, std::min(100, quality));
-}
-
-/**
- * Simulate RSSI (WiFi signal strength in dBm)
- * Real implementation would read actual WiFi RSSI
- */
-int calculateRSSI(uint32_t nodeId) {
-  // RSSI ranges from -30 (excellent) to -90 (poor)
-  int rssi = -40 - (nodeId % 50);  // Simulated based on node ID
-  return std::max(-90, std::min(-30, rssi));
-}
-
-/**
- * Simulate round-trip latency in milliseconds
- * Real implementation would measure actual ping times
- */
-int calculateLatency(uint32_t nodeId) {
-  // Latency increases with hop count
-  int baseLatency = 10;
-  int variation = nodeId % 20;
-  return baseLatency + variation;
-}
-
-// ============================================================================
-// MQTT PUBLISHING (GATEWAY ONLY)
-// ============================================================================
-
-#if IS_GATEWAY
-
-/**
- * Connect to MQTT broker
- */
-void connectMQTT() {
-  while (!mqttClient.connected()) {
-    Serial.print("Connecting to MQTT broker...");
-    
-    String clientId = "AlteriomGateway-" + getDeviceId();
-    
-    if (mqttClient.connect(clientId.c_str(), MQTT_USER, MQTT_PASS)) {
-      Serial.println(" connected!");
-      
-      // Subscribe to command topic
-      String commandTopic = "alteriom/mesh/" + String(MESH_ID) + "/command";
-      mqttClient.subscribe(commandTopic.c_str());
-      Serial.println("Subscribed to: " + commandTopic);
-    } else {
-      Serial.print(" failed, rc=");
-      Serial.print(mqttClient.state());
-      Serial.println(" retrying in 5 seconds");
-      delay(5000);
-    }
-  }
-}
-
-/**
- * Publish message to MQTT with envelope fields
- */
-bool publishMQTT(const String& topic, JsonDocument& doc) {
-  // Add envelope fields
-  doc["schema_version"] = 1;
-  doc["device_id"] = getDeviceId();
-  doc["device_type"] = NODE_ROLE;
-  doc["timestamp"] = getTimestamp();
-  doc["firmware_version"] = FIRMWARE_VERSION;
-  
-  // Serialize to JSON
-  String jsonString;
-  serializeJson(doc, jsonString);
-  
-  // Publish
-  bool success = mqttClient.publish(topic.c_str(), jsonString.c_str());
-  
-  if (success) {
-    Serial.println("✅ Published to " + topic);
-    Serial.println("   Size: " + String(jsonString.length()) + " bytes");
-  } else {
-    Serial.println("❌ Failed to publish to " + topic);
-  }
-  
-  return success;
-}
-
-/**
- * Publish mesh event (node join/leave)
- */
-void publishMeshEvent(const String& eventType, uint32_t nodeId, const String& reason = "") {
-  JsonDocument doc;
-  
-  doc["event"] = "mesh_event";
-  doc["mesh_id"] = MESH_ID;
-  doc["event_type"] = eventType;
-  
-  JsonArray affectedNodes = doc["affected_nodes"].to<JsonArray>();
-  char nodeIdStr[17];
-  snprintf(nodeIdStr, sizeof(nodeIdStr), "ALT-%012X", nodeId);
-  affectedNodes.add(nodeIdStr);
-  
-  if (reason != "") {
-    JsonObject details = doc["details"].to<JsonObject>();
-    details["reason"] = reason;
-    details["last_seen"] = getTimestamp();
-  }
-  
-  String topic = "alteriom/mesh/" + String(MESH_ID) + "/events";
-  publishMQTT(topic, doc);
-}
-
-#endif
-
-// ============================================================================
-// TOPOLOGY REPORTING
-// ============================================================================
-
-/**
- * Build and send full mesh topology
- */
-void sendFullTopology() {
-#if IS_GATEWAY
-  Serial.println("\n📊 Generating FULL topology report...");
-  
-  if (!mqttClient.connected()) {
-    connectMQTT();
-    return;
-  }
-  
-  JsonDocument doc;
-  
-  doc["event"] = "mesh_topology";
-  doc["mesh_id"] = MESH_ID;
-  doc["gateway_node_id"] = getDeviceId();
-  doc["update_type"] = "full";
-  
-  // Get node list
-  SimpleList<uint32_t> nodeList = mesh.getNodeList();
-  
-  // Add nodes array
-  JsonArray nodes = doc["nodes"].to<JsonArray>();
-  
-  // Add gateway node
-  JsonObject gatewayNode = nodes.add<JsonObject>();
-  gatewayNode["node_id"] = getDeviceId();
-  gatewayNode["role"] = NODE_ROLE;
-  gatewayNode["status"] = "online";
-  gatewayNode["last_seen"] = getTimestamp();
-  gatewayNode["firmware_version"] = FIRMWARE_VERSION;
-  gatewayNode["uptime_seconds"] = millis() / 1000;
-  gatewayNode["free_memory_kb"] = ESP.getFreeHeap() / 1024;
-  gatewayNode["connection_count"] = nodeList.size();
-  
-  // Add other nodes
-  for (auto nodeId : nodeList) {
-    JsonObject node = nodes.add<JsonObject>();
-    
-    char nodeIdStr[17];
-    snprintf(nodeIdStr, sizeof(nodeIdStr), "ALT-%012X", nodeId);
-    node["node_id"] = nodeIdStr;
-    
-    // Simulate role based on node ID
-    node["role"] = (nodeId % 2 == 0) ? "sensor" : "repeater";
-    node["status"] = "online";
-    node["last_seen"] = getTimestamp();
-    node["firmware_version"] = FIRMWARE_VERSION;
-    node["uptime_seconds"] = 0;  // Unknown for remote nodes
-    node["free_memory_kb"] = 0;  // Unknown for remote nodes
-    node["connection_count"] = 1;  // Simplified
-  }
-  
-  // Add connections array
-  JsonArray connections = doc["connections"].to<JsonArray>();
-  
-  for (auto nodeId : nodeList) {
-    JsonObject conn = connections.add<JsonObject>();
-    conn["from_node"] = getDeviceId();
-    
-    char nodeIdStr[17];
-    snprintf(nodeIdStr, sizeof(nodeIdStr), "ALT-%012X", nodeId);
-    conn["to_node"] = nodeIdStr;
-    
-    conn["quality"] = calculateQuality(nodeId);
-    conn["latency_ms"] = calculateLatency(nodeId);
-    conn["rssi"] = calculateRSSI(nodeId);
-    conn["hop_count"] = 1;  // Direct connection to gateway
-  }
-  
-  // Add metrics
-  JsonObject metrics = doc["metrics"].to<JsonObject>();
-  metrics["total_nodes"] = nodeList.size() + 1;  // +1 for gateway
-  metrics["online_nodes"] = nodeList.size() + 1;
-  metrics["network_diameter"] = 1;  // Single hop for this test
-  
-  int avgQuality = 0;
-  for (auto nodeId : nodeList) {
-    avgQuality += calculateQuality(nodeId);
-  }
-  if (nodeList.size() > 0) {
-    avgQuality /= nodeList.size();
-  }
-  metrics["avg_connection_quality"] = avgQuality;
-  metrics["messages_per_second"] = 0.0;  // Not tracked in this test
-  
-  String topic = "alteriom/mesh/" + String(MESH_ID) + "/topology";
-  publishMQTT(topic, doc);
-  
-  // Update last topology state
-  lastTopology.clear();
-  for (auto nodeId : nodeList) {
-    NodeState state;
-    state.nodeId = nodeId;
-    state.role = (nodeId % 2 == 0) ? "sensor" : "repeater";
-    state.online = true;
-    state.lastSeen = millis();
-    state.connectionCount = 1;
-    lastTopology[nodeId] = state;
-  }
-  lastTopologyUpdate = millis();
-  
-  Serial.println("✅ Full topology published");
-  Serial.println("   Nodes: " + String(nodeList.size() + 1));
-  Serial.println("   Connections: " + String(nodeList.size()));
-  
-#endif
-}
-
-/**
- * Check for topology changes and send incremental update
- */
-void checkIncrementalUpdate() {
-#if IS_GATEWAY
-  if (!mqttClient.connected()) {
-    connectMQTT();
-    return;
-  }
-  
-  SimpleList<uint32_t> currentNodes = mesh.getNodeList();
-  bool hasChanges = false;
-  
-  // Check for new nodes
-  std::vector<uint32_t> newNodes;
-  for (auto nodeId : currentNodes) {
-    if (lastTopology.find(nodeId) == lastTopology.end()) {
-      newNodes.push_back(nodeId);
-      hasChanges = true;
-    }
-  }
-  
-  // Check for removed nodes
-  std::vector<uint32_t> removedNodes;
-  for (auto& pair : lastTopology) {
-    uint32_t nodeId = pair.first;
-    bool found = false;
-    for (auto currentId : currentNodes) {
-      if (currentId == nodeId) {
-        found = true;
-        break;
-      }
-    }
-    if (!found) {
-      removedNodes.push_back(nodeId);
-      hasChanges = true;
-    }
-  }
-  
-  if (hasChanges) {
-    Serial.println("\n🔄 Topology changed! Generating incremental update...");
-    
-    JsonDocument doc;
-    
-    doc["event"] = "mesh_topology";
-    doc["mesh_id"] = MESH_ID;
-    doc["gateway_node_id"] = getDeviceId();
-    doc["update_type"] = "incremental";
-    
-    JsonArray nodes = doc["nodes"].to<JsonArray>();
-    JsonArray connections = doc["connections"].to<JsonArray>();
-    
-    // Add new nodes
-    for (auto nodeId : newNodes) {
-      JsonObject node = nodes.add<JsonObject>();
-      
-      char nodeIdStr[17];
-      snprintf(nodeIdStr, sizeof(nodeIdStr), "ALT-%012X", nodeId);
-      node["node_id"] = nodeIdStr;
-      node["role"] = (nodeId % 2 == 0) ? "sensor" : "repeater";
-      node["status"] = "online";
-      node["last_seen"] = getTimestamp();
-      
-      JsonObject conn = connections.add<JsonObject>();
-      conn["from_node"] = getDeviceId();
-      conn["to_node"] = nodeIdStr;
-      conn["quality"] = calculateQuality(nodeId);
-      conn["latency_ms"] = calculateLatency(nodeId);
-      conn["rssi"] = calculateRSSI(nodeId);
-      conn["hop_count"] = 1;
-      
-      Serial.println("   + Node joined: " + String(nodeIdStr));
-      
-      // Publish event
-      publishMeshEvent("node_join", nodeId);
-      
-      // Update state
-      NodeState state;
-      state.nodeId = nodeId;
-      state.role = (nodeId % 2 == 0) ? "sensor" : "repeater";
-      state.online = true;
-      state.lastSeen = millis();
-      state.connectionCount = 1;
-      lastTopology[nodeId] = state;
-    }
-    
-    // Mark removed nodes as offline
-    for (auto nodeId : removedNodes) {
-      JsonObject node = nodes.add<JsonObject>();
-      
-      char nodeIdStr[17];
-      snprintf(nodeIdStr, sizeof(nodeIdStr), "ALT-%012X", nodeId);
-      node["node_id"] = nodeIdStr;
-      node["status"] = "offline";
-      node["last_seen"] = getTimestamp();
-      
-      Serial.println("   - Node left: " + String(nodeIdStr));
-      
-      // Publish event
-      publishMeshEvent("node_leave", nodeId, "timeout");
-      
-      // Remove from state
-      lastTopology.erase(nodeId);
-    }
-    
-    String topic = "alteriom/mesh/" + String(MESH_ID) + "/topology";
-    publishMQTT(topic, doc);
-    
-    Serial.println("✅ Incremental update published");
-  }
-#endif
-}
-
-/**
- * Check for incoming MQTT commands
- */
-void checkCommands() {
-#if IS_GATEWAY
-  mqttClient.loop();
-#endif
-}
-
-// ============================================================================
-// MQTT COMMAND HANDLER (GATEWAY ONLY)
-// ============================================================================
-
-#if IS_GATEWAY
-
-/**
- * Handle incoming MQTT messages (commands)
- */
-void mqttCallback(char* topic, byte* payload, unsigned int length) {
-  Serial.println("\n📥 MQTT message received:");
-  Serial.println("   Topic: " + String(topic));
-  
-  // Parse JSON
-  JsonDocument doc;
-  DeserializationError error = deserializeJson(doc, payload, length);
-  
-  if (error) {
-    Serial.println("   ❌ JSON parse error: " + String(error.c_str()));
-    return;
-  }
-  
-  String event = doc["event"];
-  String command = doc["command"];
-  String correlationId = doc["correlation_id"];
-  
-  Serial.println("   Event: " + event);
-  Serial.println("   Command: " + command);
-  Serial.println("   Correlation ID: " + correlationId);
-  
-  // Handle GET_TOPOLOGY command (command ID 300)
-  if (event == "command" && command == "get_topology") {
-    Serial.println("   🔍 Processing GET_TOPOLOGY command...");
-    
-    unsigned long startTime = millis();
-    
-    // Build topology response
-    JsonDocument responseDoc;
-    responseDoc["event"] = "command_response";
-    responseDoc["command"] = "get_topology";
-    responseDoc["correlation_id"] = correlationId;
-    responseDoc["success"] = true;
-    
-    // Build topology result
-    JsonObject result = responseDoc["result"].to<JsonObject>();
-    result["event"] = "mesh_topology";
-    result["mesh_id"] = MESH_ID;
-    result["gateway_node_id"] = getDeviceId();
-    result["update_type"] = "full";
-    
-    SimpleList<uint32_t> nodeList = mesh.getNodeList();
-    
-    // Add nodes
-    JsonArray nodes = result["nodes"].to<JsonArray>();
-    
-    JsonObject gatewayNode = nodes.add<JsonObject>();
-    gatewayNode["node_id"] = getDeviceId();
-    gatewayNode["role"] = NODE_ROLE;
-    gatewayNode["status"] = "online";
-    gatewayNode["connection_count"] = nodeList.size();
-    
-    for (auto nodeId : nodeList) {
-      JsonObject node = nodes.add<JsonObject>();
-      char nodeIdStr[17];
-      snprintf(nodeIdStr, sizeof(nodeIdStr), "ALT-%012X", nodeId);
-      node["node_id"] = nodeIdStr;
-      node["role"] = (nodeId % 2 == 0) ? "sensor" : "repeater";
-      node["status"] = "online";
-    }
-    
-    // Add connections
-    JsonArray connections = result["connections"].to<JsonArray>();
-    for (auto nodeId : nodeList) {
-      JsonObject conn = connections.add<JsonObject>();
-      conn["from_node"] = getDeviceId();
-      char nodeIdStr[17];
-      snprintf(nodeIdStr, sizeof(nodeIdStr), "ALT-%012X", nodeId);
-      conn["to_node"] = nodeIdStr;
-      conn["quality"] = calculateQuality(nodeId);
-      conn["hop_count"] = 1;
-    }
-    
-    // Add metrics
-    JsonObject metrics = result["metrics"].to<JsonObject>();
-    metrics["total_nodes"] = nodeList.size() + 1;
-    metrics["online_nodes"] = nodeList.size() + 1;
-    
-    // Calculate latency
-    unsigned long latency = millis() - startTime;
-    responseDoc["latency_ms"] = latency;
-    
-    // Publish response
-    String responseTopic = "alteriom/mesh/" + String(MESH_ID) + "/topology/response";
-    publishMQTT(responseTopic, responseDoc);
-    
-    Serial.println("   ✅ GET_TOPOLOGY response sent");
-    Serial.println("   Latency: " + String(latency) + "ms");
-  }
-}
-
-#endif
-
-// ============================================================================
-// MESH CALLBACKS
-// ============================================================================
-
-void receivedCallback(uint32_t from, String &msg) {
-  Serial.printf("Received from %u: %s\n", from, msg.c_str());
-}
-
-void newConnectionCallback(uint32_t nodeId) {
-  Serial.printf("✅ New connection: %u\n", nodeId);
-  
-#if IS_GATEWAY
-  // Trigger incremental update on next check
-  lastTopologyUpdate = 0;
-#endif
-}
-
-void changedConnectionCallback() {
-  Serial.println("🔄 Connections changed");
-}
-
-void nodeTimeAdjustedCallback(int32_t offset) {
-  Serial.printf("⏰ Time adjusted: %d us\n", offset);
-}
-
-void droppedConnectionCallback(uint32_t nodeId) {
-  Serial.printf("❌ Connection dropped: %u\n", nodeId);
-  
-#if IS_GATEWAY
-  // Trigger incremental update on next check
-  lastTopologyUpdate = 0;
-#endif
-}
-
-// ============================================================================
-// SETUP
-// ============================================================================
-
-void setup() {
-  Serial.begin(115200);
-  delay(1000);
-  
-  Serial.println("\n\n");
-  Serial.println("================================");
-  Serial.println("Alteriom Mesh Topology Test");
-  Serial.println("================================");
-  Serial.println("Device ID: " + getDeviceId());
-  Serial.println("Role: " + String(NODE_ROLE));
-  Serial.println("Firmware: " + String(FIRMWARE_VERSION));
-  Serial.println("Gateway: " + String(IS_GATEWAY ? "YES" : "NO"));
-  Serial.println("================================\n");
-  
-  // Initialize mesh
-  mesh.setDebugMsgTypes(ERROR | STARTUP | CONNECTION);
-  mesh.init(MESH_PREFIX, MESH_PASSWORD, &userScheduler, MESH_PORT);
-  
-  // Set callbacks
-  mesh.onReceive(&receivedCallback);
-  mesh.onNewConnection(&newConnectionCallback);
-  mesh.onChangedConnections(&changedConnectionCallback);
-  mesh.onNodeTimeAdjusted(&nodeTimeAdjustedCallback);
-  mesh.onDroppedConnection(&droppedConnectionCallback);
-  
-#if IS_GATEWAY
-  // Gateway: Connect to WiFi
-  Serial.println("Connecting to WiFi: " + String(WIFI_SSID));
-  WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
-  
-  while (WiFi.status() != WL_CONNECTED) {
-    delay(500);
-    Serial.print(".");
-  }
-  
-  Serial.println("\n✅ WiFi connected!");
-  Serial.println("   IP: " + WiFi.localIP().toString());
-  
-  // Connect to MQTT
-  mqttClient.setServer(MQTT_BROKER, MQTT_PORT);
-  mqttClient.setCallback(mqttCallback);
-  mqttClient.setBufferSize(2048);  // Increase buffer for large topology messages
-  connectMQTT();
-  
-  // Add topology reporting tasks
-  userScheduler.addTask(taskSendFullTopology);
-  userScheduler.addTask(taskCheckIncrementalUpdate);
-  userScheduler.addTask(taskCheckCommands);
-  
-  taskSendFullTopology.enable();
-  taskCheckIncrementalUpdate.enable();
-  taskCheckCommands.enable();
-  
-  Serial.println("✅ Topology reporting enabled");
-  Serial.println("   Full topology: every " + String(FULL_TOPOLOGY_INTERVAL/1000) + "s");
-  Serial.println("   Incremental check: every " + String(INCREMENTAL_INTERVAL/1000) + "s");
-#endif
-  
-  Serial.println("\n🚀 Setup complete! Mesh is running...\n");
-}
-
-// ============================================================================
-// LOOP
-// ============================================================================
-
-void loop() {
-  mesh.update();
-  
-#if IS_GATEWAY
-  // Keep MQTT connected
-  if (!mqttClient.connected()) {
-    connectMQTT();
-  }
-#endif
-}