@alteriom/painlessmesh 1.8.15 → 1.9.0

package/examples/ntpTimeSyncNode/ntpTimeSyncNode.ino

@@ -1,109 +0,0 @@
-/**
- * @file ntpTimeSyncNode.ino
- * @brief Example: Regular mesh node receiving NTP time from bridge
- * 
- * This example demonstrates a regular mesh node that:
- * 1. Connects to the mesh network
- * 2. Listens for NTP time broadcasts from bridge nodes
- * 3. Updates local time when NTP sync is received
- * 4. Optionally syncs RTC module if available
- * 
- * No Internet connection needed - time is received from bridge!
- */
-
-#include "painlessMesh.h"
-#include "alteriom_sensor_package.hpp"
-
-// Mesh configuration
-#define MESH_PREFIX     "AlteriomMesh"
-#define MESH_PASSWORD   "your_mesh_password"
-#define MESH_PORT       5555
-
-Scheduler userScheduler;
-painlessMesh mesh;
-
-using namespace alteriom;
-
-// Track last time sync
-uint32_t lastNTPSync = 0;
-uint32_t ntpSyncCount = 0;
-
-// Received callback - handle incoming messages
-void receivedCallback(uint32_t from, String& msg) {
-  // Parse JSON message
-  DynamicJsonDocument doc(1024);
-  DeserializationError error = deserializeJson(doc, msg);
-  
-  if (error) {
-    Serial.printf("JSON parse error: %s\n", error.c_str());
-    return;
-  }
-  
-  JsonObject obj = doc.as<JsonObject>();
-  uint16_t msgType = obj["type"];
-  
-  // Check if this is an NTP time sync message
-  if (msgType == 614) {
-    // Deserialize NTP time sync package
-    auto pkg = NTPTimeSyncPackage(obj);
-    
-    Serial.printf("\n=== NTP Time Sync Received ===\n");
-    Serial.printf("From: %u\n", from);
-    Serial.printf("NTP Time: %u\n", pkg.ntpTime);
-    Serial.printf("Accuracy: %ums\n", pkg.accuracy);
-    Serial.printf("Source: %s\n", pkg.source.c_str());
-    Serial.printf("Timestamp: %u\n", pkg.timestamp);
-    Serial.println("=============================\n");
-    
-    // Update mesh time (this is application-specific)
-    // In a real implementation, you would:
-    // 1. Verify the sender is a bridge node
-    // 2. Apply the time with mesh.setTimeFromNTP(pkg.ntpTime)
-    // 3. Update RTC if available
-    
-    lastNTPSync = millis();
-    ntpSyncCount++;
-    
-    Serial.printf("Time sync applied! Total syncs: %u\n", ntpSyncCount);
-  }
-}
-
-// Status task - periodic status updates
-Task taskStatus(30000, TASK_FOREVER, [](){
-  uint32_t timeSinceSync = (millis() - lastNTPSync) / 1000;
-  
-  Serial.printf("\n--- Node Status ---\n");
-  Serial.printf("Node ID: %u\n", mesh.getNodeId());
-  Serial.printf("Connections: %d\n", mesh.getNodeList().size());
-  Serial.printf("NTP Syncs: %u\n", ntpSyncCount);
-  
-  if (ntpSyncCount > 0) {
-    Serial.printf("Last sync: %u seconds ago\n", timeSinceSync);
-  } else {
-    Serial.println("Waiting for first NTP sync...");
-  }
-  
-  Serial.println("------------------\n");
-});
-
-void setup() {
-  Serial.begin(115200);
-  
-  // Initialize mesh
-  mesh.setDebugMsgTypes(ERROR | STARTUP | CONNECTION);
-  mesh.init(MESH_PREFIX, MESH_PASSWORD, &userScheduler, MESH_PORT);
-  
-  // Set callbacks
-  mesh.onReceive(&receivedCallback);
-  
-  // Add status task
-  userScheduler.addTask(taskStatus);
-  taskStatus.enable();
-  
-  Serial.println("Regular mesh node initialized");
-  Serial.println("Listening for NTP time broadcasts...");
-}
-
-void loop() {
-  mesh.update();
-}

package/examples/queued_alarms/README.md

@@ -1,390 +0,0 @@
-# Queued Alarms Example
-
-## Overview
-
-This example demonstrates **priority-based message queueing** for critical IoT systems that cannot afford to lose data during Internet outages. It's designed for the fish farm dissolved oxygen (O2) monitoring use case described in [Issue #66](https://github.com/Alteriom/painlessMesh/issues/66).
-
-## Problem Statement
-
-In production IoT systems like fish farm monitoring, **critical alarms must never be lost**. When the bridge node loses Internet connectivity:
-
-- ❌ **Without queueing**: Critical O2 alarms are lost → fish die
-- ✅ **With queueing**: Alarms are queued and delivered when connection restored → supervisor notified, fish saved
-
-## Features
-
-### ✅ Priority-Based Queueing
-
-- **CRITICAL** (Priority 0): Life-safety alarms - never dropped
-- **HIGH** (Priority 1): Important warnings - preserved up to 80% capacity
-- **NORMAL** (Priority 2): Regular data - preserved up to 60% capacity  
-- **LOW** (Priority 3): Telemetry - dropped first when queue full
-
-### ✅ Automatic Queue Management
-
-- Queues messages when Internet unavailable
-- Flushes queue when Internet restored
-- Prunes old messages (configurable age)
-- Monitors queue health with callbacks
-
-### ✅ Production Ready
-
-- Survives Internet outages (queuing)
-- Handles queue overflow intelligently
-- Provides queue statistics
-- Retry logic with attempt tracking
-
-## Hardware Requirements
-
-- **ESP32** or **ESP8266** 
-- At least 2 nodes (1 bridge + 1 sensor node)
-- Bridge node needs WiFi router access
-
-## Configuration
-
-### 1. Mesh Network Settings
-
-```cpp
-#define MESH_PREFIX     "FishFarmMesh"
-#define MESH_PASSWORD   "somethingSneaky"
-#define MESH_PORT       5555
-```
-
-### 2. Router Credentials (Bridge Node)
-
-```cpp
-#define ROUTER_SSID     "YourWiFiSSID"
-#define ROUTER_PASSWORD "YourWiFiPassword"
-```
-
-Enable in setup for bridge node:
-```cpp
-mesh.stationManual(ROUTER_SSID, ROUTER_PASSWORD);
-```
-
-### 3. Sensor Thresholds
-
-Adjust for your sensors (dissolved oxygen in mg/L):
-
-```cpp
-#define CRITICAL_O2_THRESHOLD  3.0  // Life-critical
-#define WARNING_O2_THRESHOLD   5.0  // Warning level
-```
-
-### 4. Queue Configuration
-
-```cpp
-#define MAX_QUEUE_SIZE  500  // Max messages
-#define QUEUE_PRUNE_AGE (24 * 60 * 60 * 1000)  // 24 hours
-```
-
-## How It Works
-
-### Normal Operation (Internet Available)
-
-```
-Sensor → Mesh → Bridge → Internet → Cloud/MQTT
-```
-
-Messages sent immediately, no queueing.
-
-### Offline Mode (No Internet)
-
-```
-Sensor → Mesh → Bridge → Queue (Priority-based)
-                         ↓
-                    [CRITICAL never dropped]
-                    [LOW dropped first]
-```
-
-Messages queued with priority, delivered when Internet restored.
-
-### Internet Restored
-
-```
-Queue → Flush → MQTT/HTTP → Cloud
-  ↓
-Remove on success
-Retry on failure (max 3 attempts)
-```
-
-## Usage
-
-### 1. Flash Bridge Node
-
-1. Uncomment these lines in `setup()`:
-   ```cpp
-   mesh.stationManual(ROUTER_SSID, ROUTER_PASSWORD);
-   mesh.setHostname("FishFarmBridge");
-   ```
-2. Upload to ESP32/ESP8266 with router access
-3. Bridge connects to router and provides Internet to mesh
-
-### 2. Flash Sensor Nodes
-
-1. Leave router lines commented
-2. Upload to sensor node ESP32/ESP8266
-3. Node joins mesh and monitors sensors
-
-### 3. Monitor Serial Output
-
-**Normal operation:**
-```
-✅ ONLINE MODE - Internet restored
-📊 Telemetry: 7.32 mg/L
-📊 Telemetry: 6.85 mg/L
-```
-
-**Internet lost:**
-```
-⚠️  OFFLINE MODE ACTIVATED
-  Queue size: 0 messages
-📊 Telemetry: 6.42 mg/L - queued #1
-  [Queue: 1 messages]
-```
-
-**Critical alarm (offline):**
-```
-🚨 CRITICAL O2 ALARM: 2.87 mg/L - QUEUED #5
-  [Queue: 5 messages (1 CRITICAL)]
-```
-
-**Internet restored:**
-```
-✅ ONLINE MODE - Internet restored
-  Flushing 5 queued messages...
-  Sending queued message #1 (priority=3, attempts=0)
-  Sending queued message #5 (priority=0, attempts=0)
-  ✅ Queue flushed (5 messages sent)
-```
-
-## Queue States
-
-The example monitors queue health:
-
-- **EMPTY**: No messages queued
-- **NORMAL**: Queue has space available
-- **75% FULL**: Warning - queue reaching capacity
-- **FULL**: Queue full - dropping LOW priority messages
-
-Example output:
-```
-⚠️  Queue 75% full (375 messages)
-🚨 Queue FULL (500 messages) - dropping LOW priority
-```
-
-## Testing Without Hardware
-
-### Simulate Internet Loss
-
-In real deployment, Internet loss is automatic. For testing, you can:
-
-1. **Disconnect router**: Physically disconnect Ethernet/WAN
-2. **Block MAC address**: Router settings → Block bridge MAC
-3. **Power cycle router**: Turn off router
-4. **Modify code**: Add test button to toggle `offlineMode`
-
-### Verify Queue Behavior
-
-1. Start with Internet connected
-2. Cause Internet loss (any method above)
-3. Wait for critical alarms to queue
-4. Restore Internet
-5. Verify messages are flushed
-
-Expected sequence:
-```
-✅ Online → ⚠️ Offline (queueing) → ✅ Online (flush queue)
-```
-
-## Integration with Cloud Services
-
-### MQTT Example
-
-Replace simulated sending with MQTT:
-
-```cpp
-#include <PubSubClient.h>
-
-WiFiClient wifiClient;
-PubSubClient mqttClient(wifiClient);
-
-// In setup()
-mqttClient.setServer("mqtt.example.com", 1883);
-
-// In bridgeStatusCallback()
-for (auto& msg : messages) {
-  bool sent = mqttClient.publish(
-    msg.destination.c_str(),  // Topic from queueMessage()
-    msg.payload.c_str()
-  );
-  
-  if (sent) {
-    mesh.removeQueuedMessage(msg.id);
-  } else {
-    mesh.incrementQueuedMessageAttempts(msg.id);
-  }
-}
-```
-
-### HTTP Example
-
-Replace simulated sending with HTTP POST:
-
-```cpp
-#include <HTTPClient.h>
-
-HTTPClient http;
-
-for (auto& msg : messages) {
-  http.begin(msg.destination);  // URL from queueMessage()
-  http.addHeader("Content-Type", "application/json");
-  
-  int httpCode = http.POST(msg.payload);
-  bool sent = (httpCode == 200 || httpCode == 201);
-  
-  if (sent) {
-    mesh.removeQueuedMessage(msg.id);
-  } else {
-    mesh.incrementQueuedMessageAttempts(msg.id);
-  }
-  
-  http.end();
-}
-```
-
-## Message Format
-
-Example JSON message structure:
-
-### Critical Alarm
-```json
-{
-  "type": "CRITICAL_ALARM",
-  "sensor": "O2",
-  "value": 2.87,
-  "threshold": 3.0,
-  "tankId": "TANK_A",
-  "nodeId": 123456789,
-  "timestamp": 1234567890
-}
-```
-
-### Warning
-```json
-{
-  "type": "WARNING",
-  "sensor": "O2",
-  "value": 4.5,
-  "threshold": 5.0,
-  "nodeId": 123456789
-}
-```
-
-### Telemetry
-```json
-{
-  "sensor": "O2",
-  "value": 7.32,
-  "nodeId": 123456789
-}
-```
-
-## API Reference
-
-### Enable Queue
-
-```cpp
-mesh.enableMessageQueue(true, MAX_QUEUE_SIZE);
-```
-
-### Queue Message
-
-```cpp
-uint32_t msgId = mesh.queueMessage(
-  payload,              // Message content
-  destination,          // Cloud endpoint/topic
-  PRIORITY_CRITICAL     // Priority level
-);
-```
-
-### Flush Queue
-
-```cpp
-auto messages = mesh.flushMessageQueue();
-for (auto& msg : messages) {
-  if (sendToCloud(msg)) {
-    mesh.removeQueuedMessage(msg.id);
-  }
-}
-```
-
-### Query Queue
-
-```cpp
-uint32_t total = mesh.getQueuedMessageCount();
-uint32_t critical = mesh.getQueuedMessageCount(PRIORITY_CRITICAL);
-```
-
-### Callbacks
-
-```cpp
-mesh.onBridgeStatusChanged([](uint32_t bridgeId, bool hasInternet) {
-  // Handle Internet connectivity change
-});
-
-mesh.onQueueStateChanged([](QueueState state, uint32_t count) {
-  // Handle queue state change (EMPTY, NORMAL, 75%, FULL)
-});
-```
-
-## Troubleshooting
-
-### Queue Always Full
-
-- Increase `MAX_QUEUE_SIZE`
-- Decrease message frequency
-- Lower message priorities
-- Reduce `QUEUE_PRUNE_AGE`
-
-### Messages Not Flushing
-
-- Check `bridgeStatusCallback()` is called
-- Verify Internet connectivity with `mesh.hasInternetConnection()`
-- Check MQTT/HTTP sending code
-- Monitor serial for errors
-
-### High Memory Usage
-
-- Reduce `MAX_QUEUE_SIZE`
-- Enable aggressive pruning
-- Use shorter message payloads
-- Monitor with `ESP.getFreeHeap()`
-
-## Performance
-
-### Memory Usage
-
-| Queue Size | RAM Usage (approx) |
-|------------|-------------------|
-| 100        | ~20 KB            |
-| 500        | ~100 KB           |
-| 1000       | ~200 KB           |
-
-**ESP32**: Can handle 1000+ messages  
-**ESP8266**: Recommend ≤500 messages
-
-### Throughput
-
-- **Queue**: ~1000 msg/sec
-- **Flush**: Limited by MQTT/HTTP send rate (~10-50 msg/sec)
-
-## Related Documentation
-
-- [Issue #66: Message Queueing Feature](https://github.com/Alteriom/painlessMesh/issues/66)
-- [Issue #63: Bridge Status Broadcast](https://github.com/Alteriom/painlessMesh/issues/63)
-- [painlessMesh Documentation](https://gitlab.com/painlessMesh/painlessMesh)
-
-## License
-
-MIT License - See repository LICENSE file