therubyracer 0.9.0beta2 → 0.9.0beta3

data/ext/v8/upstream/3.1.8/src/x64/assembler-x64.h

@@ -1,1584 +0,0 @@
-// Copyright (c) 1994-2006 Sun Microsystems Inc.
-// All Rights Reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-// - Redistributions of source code must retain the above copyright notice,
-// this list of conditions and the following disclaimer.
-//
-// - Redistribution in binary form must reproduce the above copyright
-// notice, this list of conditions and the following disclaimer in the
-// documentation and/or other materials provided with the distribution.
-//
-// - Neither the name of Sun Microsystems or the names of contributors may
-// be used to endorse or promote products derived from this software without
-// specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-// The original source code covered by the above license above has been
-// modified significantly by Google Inc.
-// Copyright 2011 the V8 project authors. All rights reserved.
-
-// A lightweight X64 Assembler.
-
-#ifndef V8_X64_ASSEMBLER_X64_H_
-#define V8_X64_ASSEMBLER_X64_H_
-
-#include "serialize.h"
-
-namespace v8 {
-namespace internal {
-
-// Utility functions
-
-// Test whether a 64-bit value is in a specific range.
-static inline bool is_uint32(int64_t x) {
-  static const uint64_t kMaxUInt32 = V8_UINT64_C(0xffffffff);
-  return static_cast<uint64_t>(x) <= kMaxUInt32;
-}
-
-static inline bool is_int32(int64_t x) {
-  static const int64_t kMinInt32 = -V8_INT64_C(0x80000000);
-  return is_uint32(x - kMinInt32);
-}
-
-static inline bool uint_is_int32(uint64_t x) {
-  static const uint64_t kMaxInt32 = V8_UINT64_C(0x7fffffff);
-  return x <= kMaxInt32;
-}
-
-static inline bool is_uint32(uint64_t x) {
-  static const uint64_t kMaxUInt32 = V8_UINT64_C(0xffffffff);
-  return x <= kMaxUInt32;
-}
-
-// CPU Registers.
-//
-// 1) We would prefer to use an enum, but enum values are assignment-
-// compatible with int, which has caused code-generation bugs.
-//
-// 2) We would prefer to use a class instead of a struct but we don't like
-// the register initialization to depend on the particular initialization
-// order (which appears to be different on OS X, Linux, and Windows for the
-// installed versions of C++ we tried). Using a struct permits C-style
-// "initialization". Also, the Register objects cannot be const as this
-// forces initialization stubs in MSVC, making us dependent on initialization
-// order.
-//
-// 3) By not using an enum, we are possibly preventing the compiler from
-// doing certain constant folds, which may significantly reduce the
-// code generated for some assembly instructions (because they boil down
-// to a few constants). If this is a problem, we could change the code
-// such that we use an enum in optimized mode, and the struct in debug
-// mode. This way we get the compile-time error checking in debug mode
-// and best performance in optimized code.
-//
-
-struct Register {
-  // The non-allocatable registers are:
-  //  rsp - stack pointer
-  //  rbp - frame pointer
-  //  rsi - context register
-  //  r10 - fixed scratch register
-  //  r13 - root register
-  //  r15 - smi constant register
-  static const int kNumRegisters = 16;
-  static const int kNumAllocatableRegisters = 10;
-
-  static int ToAllocationIndex(Register reg) {
-    return kAllocationIndexByRegisterCode[reg.code()];
-  }
-
-  static Register FromAllocationIndex(int index) {
-    ASSERT(index >= 0 && index < kNumAllocatableRegisters);
-    Register result = { kRegisterCodeByAllocationIndex[index] };
-    return result;
-  }
-
-  static const char* AllocationIndexToString(int index) {
-    ASSERT(index >= 0 && index < kNumAllocatableRegisters);
-    const char* const names[] = {
-      "rax",
-      "rbx",
-      "rdx",
-      "rcx",
-      "rdi",
-      "r8",
-      "r9",
-      "r11",
-      "r14",
-      "r12"
-    };
-    return names[index];
-  }
-
-  static Register toRegister(int code) {
-    Register r = { code };
-    return r;
-  }
-  bool is_valid() const { return 0 <= code_ && code_ < kNumRegisters; }
-  bool is(Register reg) const { return code_ == reg.code_; }
-  int code() const {
-    ASSERT(is_valid());
-    return code_;
-  }
-  int bit() const {
-    return 1 << code_;
-  }
-
-  // Return the high bit of the register code as a 0 or 1.  Used often
-  // when constructing the REX prefix byte.
-  int high_bit() const {
-    return code_ >> 3;
-  }
-  // Return the 3 low bits of the register code.  Used when encoding registers
-  // in modR/M, SIB, and opcode bytes.
-  int low_bits() const {
-    return code_ & 0x7;
-  }
-
-  // Unfortunately we can't make this private in a struct when initializing
-  // by assignment.
-  int code_;
-
- private:
-  static const int kRegisterCodeByAllocationIndex[kNumAllocatableRegisters];
-  static const int kAllocationIndexByRegisterCode[kNumRegisters];
-};
-
-const Register rax = { 0 };
-const Register rcx = { 1 };
-const Register rdx = { 2 };
-const Register rbx = { 3 };
-const Register rsp = { 4 };
-const Register rbp = { 5 };
-const Register rsi = { 6 };
-const Register rdi = { 7 };
-const Register r8 = { 8 };
-const Register r9 = { 9 };
-const Register r10 = { 10 };
-const Register r11 = { 11 };
-const Register r12 = { 12 };
-const Register r13 = { 13 };
-const Register r14 = { 14 };
-const Register r15 = { 15 };
-const Register no_reg = { -1 };
-
-
-struct XMMRegister {
-  static const int kNumRegisters = 16;
-  static const int kNumAllocatableRegisters = 15;
-
-  static int ToAllocationIndex(XMMRegister reg) {
-    ASSERT(reg.code() != 0);
-    return reg.code() - 1;
-  }
-
-  static XMMRegister FromAllocationIndex(int index) {
-    ASSERT(0 <= index && index < kNumAllocatableRegisters);
-    XMMRegister result = { index + 1 };
-    return result;
-  }
-
-  static const char* AllocationIndexToString(int index) {
-    ASSERT(index >= 0 && index < kNumAllocatableRegisters);
-    const char* const names[] = {
-      "xmm1",
-      "xmm2",
-      "xmm3",
-      "xmm4",
-      "xmm5",
-      "xmm6",
-      "xmm7",
-      "xmm8",
-      "xmm9",
-      "xmm10",
-      "xmm11",
-      "xmm12",
-      "xmm13",
-      "xmm14",
-      "xmm15"
-    };
-    return names[index];
-  }
-
-  bool is_valid() const { return 0 <= code_ && code_ < kNumRegisters; }
-  bool is(XMMRegister reg) const { return code_ == reg.code_; }
-  int code() const {
-    ASSERT(is_valid());
-    return code_;
-  }
-
-  // Return the high bit of the register code as a 0 or 1.  Used often
-  // when constructing the REX prefix byte.
-  int high_bit() const {
-    return code_ >> 3;
-  }
-  // Return the 3 low bits of the register code.  Used when encoding registers
-  // in modR/M, SIB, and opcode bytes.
-  int low_bits() const {
-    return code_ & 0x7;
-  }
-
-  int code_;
-};
-
-const XMMRegister xmm0 = { 0 };
-const XMMRegister xmm1 = { 1 };
-const XMMRegister xmm2 = { 2 };
-const XMMRegister xmm3 = { 3 };
-const XMMRegister xmm4 = { 4 };
-const XMMRegister xmm5 = { 5 };
-const XMMRegister xmm6 = { 6 };
-const XMMRegister xmm7 = { 7 };
-const XMMRegister xmm8 = { 8 };
-const XMMRegister xmm9 = { 9 };
-const XMMRegister xmm10 = { 10 };
-const XMMRegister xmm11 = { 11 };
-const XMMRegister xmm12 = { 12 };
-const XMMRegister xmm13 = { 13 };
-const XMMRegister xmm14 = { 14 };
-const XMMRegister xmm15 = { 15 };
-
-
-typedef XMMRegister DoubleRegister;
-
-
-enum Condition {
-  // any value < 0 is considered no_condition
-  no_condition  = -1,
-
-  overflow      =  0,
-  no_overflow   =  1,
-  below         =  2,
-  above_equal   =  3,
-  equal         =  4,
-  not_equal     =  5,
-  below_equal   =  6,
-  above         =  7,
-  negative      =  8,
-  positive      =  9,
-  parity_even   = 10,
-  parity_odd    = 11,
-  less          = 12,
-  greater_equal = 13,
-  less_equal    = 14,
-  greater       = 15,
-
-  // Fake conditions that are handled by the
-  // opcodes using them.
-  always        = 16,
-  never         = 17,
-  // aliases
-  carry         = below,
-  not_carry     = above_equal,
-  zero          = equal,
-  not_zero      = not_equal,
-  sign          = negative,
-  not_sign      = positive,
-  last_condition = greater
-};
-
-
-// Returns the equivalent of !cc.
-// Negation of the default no_condition (-1) results in a non-default
-// no_condition value (-2). As long as tests for no_condition check
-// for condition < 0, this will work as expected.
-inline Condition NegateCondition(Condition cc) {
-  return static_cast<Condition>(cc ^ 1);
-}
-
-
-// Corresponds to transposing the operands of a comparison.
-inline Condition ReverseCondition(Condition cc) {
-  switch (cc) {
-    case below:
-      return above;
-    case above:
-      return below;
-    case above_equal:
-      return below_equal;
-    case below_equal:
-      return above_equal;
-    case less:
-      return greater;
-    case greater:
-      return less;
-    case greater_equal:
-      return less_equal;
-    case less_equal:
-      return greater_equal;
-    default:
-      return cc;
-  };
-}
-
-
-enum Hint {
-  no_hint = 0,
-  not_taken = 0x2e,
-  taken = 0x3e
-};
-
-// The result of negating a hint is as if the corresponding condition
-// were negated by NegateCondition.  That is, no_hint is mapped to
-// itself and not_taken and taken are mapped to each other.
-inline Hint NegateHint(Hint hint) {
-  return (hint == no_hint)
-      ? no_hint
-      : ((hint == not_taken) ? taken : not_taken);
-}
-
-
-// -----------------------------------------------------------------------------
-// Machine instruction Immediates
-
-class Immediate BASE_EMBEDDED {
- public:
-  explicit Immediate(int32_t value) : value_(value) {}
-
- private:
-  int32_t value_;
-
-  friend class Assembler;
-};
-
-
-// -----------------------------------------------------------------------------
-// Machine instruction Operands
-
-enum ScaleFactor {
-  times_1 = 0,
-  times_2 = 1,
-  times_4 = 2,
-  times_8 = 3,
-  times_int_size = times_4,
-  times_pointer_size = times_8
-};
-
-
-class Operand BASE_EMBEDDED {
- public:
-  // [base + disp/r]
-  Operand(Register base, int32_t disp);
-
-  // [base + index*scale + disp/r]
-  Operand(Register base,
-          Register index,
-          ScaleFactor scale,
-          int32_t disp);
-
-  // [index*scale + disp/r]
-  Operand(Register index,
-          ScaleFactor scale,
-          int32_t disp);
-
-  // Offset from existing memory operand.
-  // Offset is added to existing displacement as 32-bit signed values and
-  // this must not overflow.
-  Operand(const Operand& base, int32_t offset);
-
-  // Checks whether either base or index register is the given register.
-  // Does not check the "reg" part of the Operand.
-  bool AddressUsesRegister(Register reg) const;
-
- private:
-  byte rex_;
-  byte buf_[6];
-  // The number of bytes of buf_ in use.
-  byte len_;
-
-  // Set the ModR/M byte without an encoded 'reg' register. The
-  // register is encoded later as part of the emit_operand operation.
-  // set_modrm can be called before or after set_sib and set_disp*.
-  inline void set_modrm(int mod, Register rm);
-
-  // Set the SIB byte if one is needed. Sets the length to 2 rather than 1.
-  inline void set_sib(ScaleFactor scale, Register index, Register base);
-
-  // Adds operand displacement fields (offsets added to the memory address).
-  // Needs to be called after set_sib, not before it.
-  inline void set_disp8(int disp);
-  inline void set_disp32(int disp);
-
-  friend class Assembler;
-};
-
-
-// CpuFeatures keeps track of which features are supported by the target CPU.
-// Supported features must be enabled by a Scope before use.
-// Example:
-//   if (CpuFeatures::IsSupported(SSE3)) {
-//     CpuFeatures::Scope fscope(SSE3);
-//     // Generate SSE3 floating point code.
-//   } else {
-//     // Generate standard x87 or SSE2 floating point code.
-//   }
-class CpuFeatures : public AllStatic {
- public:
-  // Detect features of the target CPU. Set safe defaults if the serializer
-  // is enabled (snapshots must be portable).
-  static void Probe(bool portable);
-  // Check whether a feature is supported by the target CPU.
-  static bool IsSupported(CpuFeature f) {
-    if (f == SSE2 && !FLAG_enable_sse2) return false;
-    if (f == SSE3 && !FLAG_enable_sse3) return false;
-    if (f == CMOV && !FLAG_enable_cmov) return false;
-    if (f == RDTSC && !FLAG_enable_rdtsc) return false;
-    if (f == SAHF && !FLAG_enable_sahf) return false;
-    return (supported_ & (V8_UINT64_C(1) << f)) != 0;
-  }
-  // Check whether a feature is currently enabled.
-  static bool IsEnabled(CpuFeature f) {
-    return (enabled_ & (V8_UINT64_C(1) << f)) != 0;
-  }
-  // Enable a specified feature within a scope.
-  class Scope BASE_EMBEDDED {
-#ifdef DEBUG
-   public:
-    explicit Scope(CpuFeature f) {
-      uint64_t mask = (V8_UINT64_C(1) << f);
-      ASSERT(CpuFeatures::IsSupported(f));
-      ASSERT(!Serializer::enabled() || (found_by_runtime_probing_ & mask) == 0);
-      old_enabled_ = CpuFeatures::enabled_;
-      CpuFeatures::enabled_ |= mask;
-    }
-    ~Scope() { CpuFeatures::enabled_ = old_enabled_; }
-   private:
-    uint64_t old_enabled_;
-#else
-   public:
-    explicit Scope(CpuFeature f) {}
-#endif
-  };
- private:
-  // Safe defaults include SSE2 and CMOV for X64. It is always available, if
-  // anyone checks, but they shouldn't need to check.
-  static const uint64_t kDefaultCpuFeatures = (1 << SSE2 | 1 << CMOV);
-  static uint64_t supported_;
-  static uint64_t enabled_;
-  static uint64_t found_by_runtime_probing_;
-};
-
-
-class Assembler : public Malloced {
- private:
-  // We check before assembling an instruction that there is sufficient
-  // space to write an instruction and its relocation information.
-  // The relocation writer's position must be kGap bytes above the end of
-  // the generated instructions. This leaves enough space for the
-  // longest possible x64 instruction, 15 bytes, and the longest possible
-  // relocation information encoding, RelocInfoWriter::kMaxLength == 16.
-  // (There is a 15 byte limit on x64 instruction length that rules out some
-  // otherwise valid instructions.)
-  // This allows for a single, fast space check per instruction.
-  static const int kGap = 32;
-
- public:
-  // Create an assembler. Instructions and relocation information are emitted
-  // into a buffer, with the instructions starting from the beginning and the
-  // relocation information starting from the end of the buffer. See CodeDesc
-  // for a detailed comment on the layout (globals.h).
-  //
-  // If the provided buffer is NULL, the assembler allocates and grows its own
-  // buffer, and buffer_size determines the initial buffer size. The buffer is
-  // owned by the assembler and deallocated upon destruction of the assembler.
-  //
-  // If the provided buffer is not NULL, the assembler uses the provided buffer
-  // for code generation and assumes its size to be buffer_size. If the buffer
-  // is too small, a fatal error occurs. No deallocation of the buffer is done
-  // upon destruction of the assembler.
-  Assembler(void* buffer, int buffer_size);
-  ~Assembler();
-
-  // GetCode emits any pending (non-emitted) code and fills the descriptor
-  // desc. GetCode() is idempotent; it returns the same result if no other
-  // Assembler functions are invoked in between GetCode() calls.
-  void GetCode(CodeDesc* desc);
-
-  // Read/Modify the code target in the relative branch/call instruction at pc.
-  // On the x64 architecture, we use relative jumps with a 32-bit displacement
-  // to jump to other Code objects in the Code space in the heap.
-  // Jumps to C functions are done indirectly through a 64-bit register holding
-  // the absolute address of the target.
-  // These functions convert between absolute Addresses of Code objects and
-  // the relative displacements stored in the code.
-  static inline Address target_address_at(Address pc);
-  static inline void set_target_address_at(Address pc, Address target);
-
-  // This sets the branch destination (which is in the instruction on x64).
-  // This is for calls and branches within generated code.
-  inline static void set_target_at(Address instruction_payload,
-                                   Address target) {
-    set_target_address_at(instruction_payload, target);
-  }
-
-  // This sets the branch destination (which is a load instruction on x64).
-  // This is for calls and branches to runtime code.
-  inline static void set_external_target_at(Address instruction_payload,
-                                            Address target) {
-    *reinterpret_cast<Address*>(instruction_payload) = target;
-  }
-
-  inline Handle<Object> code_target_object_handle_at(Address pc);
-  // Number of bytes taken up by the branch target in the code.
-  static const int kCallTargetSize = 4;      // Use 32-bit displacement.
-  static const int kExternalTargetSize = 8;  // Use 64-bit absolute.
-  // Distance between the address of the code target in the call instruction
-  // and the return address pushed on the stack.
-  static const int kCallTargetAddressOffset = 4;  // Use 32-bit displacement.
-  // Distance between the start of the JS return sequence and where the
-  // 32-bit displacement of a near call would be, relative to the pushed
-  // return address.  TODO: Use return sequence length instead.
-  // Should equal Debug::kX64JSReturnSequenceLength - kCallTargetAddressOffset;
-  static const int kPatchReturnSequenceAddressOffset = 13 - 4;
-  // Distance between start of patched debug break slot and where the
-  // 32-bit displacement of a near call would be, relative to the pushed
-  // return address.  TODO: Use return sequence length instead.
-  // Should equal Debug::kX64JSReturnSequenceLength - kCallTargetAddressOffset;
-  static const int kPatchDebugBreakSlotAddressOffset = 13 - 4;
-  // TODO(X64): Rename this, removing the "Real", after changing the above.
-  static const int kRealPatchReturnSequenceAddressOffset = 2;
-
-  // Some x64 JS code is padded with int3 to make it large
-  // enough to hold an instruction when the debugger patches it.
-  static const int kJumpInstructionLength = 13;
-  static const int kCallInstructionLength = 13;
-  static const int kJSReturnSequenceLength = 13;
-  static const int kShortCallInstructionLength = 5;
-
-  // The debug break slot must be able to contain a call instruction.
-  static const int kDebugBreakSlotLength = kCallInstructionLength;
-
-  // One byte opcode for test eax,0xXXXXXXXX.
-  static const byte kTestEaxByte = 0xA9;
-  // One byte opcode for test al, 0xXX.
-  static const byte kTestAlByte = 0xA8;
-  // One byte opcode for nop.
-  static const byte kNopByte = 0x90;
-
-  // One byte prefix for a short conditional jump.
-  static const byte kJccShortPrefix = 0x70;
-  static const byte kJncShortOpcode = kJccShortPrefix | not_carry;
-  static const byte kJcShortOpcode = kJccShortPrefix | carry;
-
-
-
-  // ---------------------------------------------------------------------------
-  // Code generation
-  //
-  // Function names correspond one-to-one to x64 instruction mnemonics.
-  // Unless specified otherwise, instructions operate on 64-bit operands.
-  //
-  // If we need versions of an assembly instruction that operate on different
-  // width arguments, we add a single-letter suffix specifying the width.
-  // This is done for the following instructions: mov, cmp, inc, dec,
-  // add, sub, and test.
-  // There are no versions of these instructions without the suffix.
-  // - Instructions on 8-bit (byte) operands/registers have a trailing 'b'.
-  // - Instructions on 16-bit (word) operands/registers have a trailing 'w'.
-  // - Instructions on 32-bit (doubleword) operands/registers use 'l'.
-  // - Instructions on 64-bit (quadword) operands/registers use 'q'.
-  //
-  // Some mnemonics, such as "and", are the same as C++ keywords.
-  // Naming conflicts with C++ keywords are resolved by adding a trailing '_'.
-
-  // Insert the smallest number of nop instructions
-  // possible to align the pc offset to a multiple
-  // of m, where m must be a power of 2.
-  void Align(int m);
-  // Aligns code to something that's optimal for a jump target for the platform.
-  void CodeTargetAlign();
-
-  // Stack
-  void pushfq();
-  void popfq();
-
-  void push(Immediate value);
-  // Push a 32 bit integer, and guarantee that it is actually pushed as a
-  // 32 bit value, the normal push will optimize the 8 bit case.
-  void push_imm32(int32_t imm32);
-  void push(Register src);
-  void push(const Operand& src);
-
-  void pop(Register dst);
-  void pop(const Operand& dst);
-
-  void enter(Immediate size);
-  void leave();
-
-  // Moves
-  void movb(Register dst, const Operand& src);
-  void movb(Register dst, Immediate imm);
-  void movb(const Operand& dst, Register src);
-
-  // Move the low 16 bits of a 64-bit register value to a 16-bit
-  // memory location.
-  void movw(const Operand& dst, Register src);
-
-  void movl(Register dst, Register src);
-  void movl(Register dst, const Operand& src);
-  void movl(const Operand& dst, Register src);
-  void movl(const Operand& dst, Immediate imm);
-  // Load a 32-bit immediate value, zero-extended to 64 bits.
-  void movl(Register dst, Immediate imm32);
-
-  // Move 64 bit register value to 64-bit memory location.
-  void movq(const Operand& dst, Register src);
-  // Move 64 bit memory location to 64-bit register value.
-  void movq(Register dst, const Operand& src);
-  void movq(Register dst, Register src);
-  // Sign extends immediate 32-bit value to 64 bits.
-  void movq(Register dst, Immediate x);
-  // Move the offset of the label location relative to the current
-  // position (after the move) to the destination.
-  void movl(const Operand& dst, Label* src);
-
-  // Move sign extended immediate to memory location.
-  void movq(const Operand& dst, Immediate value);
-  // New x64 instructions to load a 64-bit immediate into a register.
-  // All 64-bit immediates must have a relocation mode.
-  void movq(Register dst, void* ptr, RelocInfo::Mode rmode);
-  void movq(Register dst, int64_t value, RelocInfo::Mode rmode);
-  void movq(Register dst, const char* s, RelocInfo::Mode rmode);
-  // Moves the address of the external reference into the register.
-  void movq(Register dst, ExternalReference ext);
-  void movq(Register dst, Handle<Object> handle, RelocInfo::Mode rmode);
-
-  void movsxbq(Register dst, const Operand& src);
-  void movsxwq(Register dst, const Operand& src);
-  void movsxlq(Register dst, Register src);
-  void movsxlq(Register dst, const Operand& src);
-  void movzxbq(Register dst, const Operand& src);
-  void movzxbl(Register dst, const Operand& src);
-  void movzxwq(Register dst, const Operand& src);
-  void movzxwl(Register dst, const Operand& src);
-
-  // Repeated moves.
-
-  void repmovsb();
-  void repmovsw();
-  void repmovsl();
-  void repmovsq();
-
-  // New x64 instruction to load from an immediate 64-bit pointer into RAX.
-  void load_rax(void* ptr, RelocInfo::Mode rmode);
-  void load_rax(ExternalReference ext);
-
-  // Conditional moves.
-  void cmovq(Condition cc, Register dst, Register src);
-  void cmovq(Condition cc, Register dst, const Operand& src);
-  void cmovl(Condition cc, Register dst, Register src);
-  void cmovl(Condition cc, Register dst, const Operand& src);
-
-  // Exchange two registers
-  void xchg(Register dst, Register src);
-
-  // Arithmetics
-  void addl(Register dst, Register src) {
-    arithmetic_op_32(0x03, dst, src);
-  }
-
-  void addl(Register dst, Immediate src) {
-    immediate_arithmetic_op_32(0x0, dst, src);
-  }
-
-  void addl(Register dst, const Operand& src) {
-    arithmetic_op_32(0x03, dst, src);
-  }
-
-  void addl(const Operand& dst, Immediate src) {
-    immediate_arithmetic_op_32(0x0, dst, src);
-  }
-
-  void addq(Register dst, Register src) {
-    arithmetic_op(0x03, dst, src);
-  }
-
-  void addq(Register dst, const Operand& src) {
-    arithmetic_op(0x03, dst, src);
-  }
-
-  void addq(const Operand& dst, Register src) {
-    arithmetic_op(0x01, src, dst);
-  }
-
-  void addq(Register dst, Immediate src) {
-    immediate_arithmetic_op(0x0, dst, src);
-  }
-
-  void addq(const Operand& dst, Immediate src) {
-    immediate_arithmetic_op(0x0, dst, src);
-  }
-
-  void sbbl(Register dst, Register src) {
-    arithmetic_op_32(0x1b, dst, src);
-  }
-
-  void sbbq(Register dst, Register src) {
-    arithmetic_op(0x1b, dst, src);
-  }
-
-  void cmpb(Register dst, Immediate src) {
-    immediate_arithmetic_op_8(0x7, dst, src);
-  }
-
-  void cmpb_al(Immediate src);
-
-  void cmpb(Register dst, Register src) {
-    arithmetic_op(0x3A, dst, src);
-  }
-
-  void cmpb(Register dst, const Operand& src) {
-    arithmetic_op(0x3A, dst, src);
-  }
-
-  void cmpb(const Operand& dst, Register src) {
-    arithmetic_op(0x38, src, dst);
-  }
-
-  void cmpb(const Operand& dst, Immediate src) {
-    immediate_arithmetic_op_8(0x7, dst, src);
-  }
-
-  void cmpw(const Operand& dst, Immediate src) {
-    immediate_arithmetic_op_16(0x7, dst, src);
-  }
-
-  void cmpw(Register dst, Immediate src) {
-    immediate_arithmetic_op_16(0x7, dst, src);
-  }
-
-  void cmpw(Register dst, const Operand& src) {
-    arithmetic_op_16(0x3B, dst, src);
-  }
-
-  void cmpw(Register dst, Register src) {
-    arithmetic_op_16(0x3B, dst, src);
-  }
-
-  void cmpw(const Operand& dst, Register src) {
-    arithmetic_op_16(0x39, src, dst);
-  }
-
-  void cmpl(Register dst, Register src) {
-    arithmetic_op_32(0x3B, dst, src);
-  }
-
-  void cmpl(Register dst, const Operand& src) {
-    arithmetic_op_32(0x3B, dst, src);
-  }
-
-  void cmpl(const Operand& dst, Register src) {
-    arithmetic_op_32(0x39, src, dst);
-  }
-
-  void cmpl(Register dst, Immediate src) {
-    immediate_arithmetic_op_32(0x7, dst, src);
-  }
-
-  void cmpl(const Operand& dst, Immediate src) {
-    immediate_arithmetic_op_32(0x7, dst, src);
-  }
-
-  void cmpq(Register dst, Register src) {
-    arithmetic_op(0x3B, dst, src);
-  }
-
-  void cmpq(Register dst, const Operand& src) {
-    arithmetic_op(0x3B, dst, src);
-  }
-
-  void cmpq(const Operand& dst, Register src) {
-    arithmetic_op(0x39, src, dst);
-  }
-
-  void cmpq(Register dst, Immediate src) {
-    immediate_arithmetic_op(0x7, dst, src);
-  }
-
-  void cmpq(const Operand& dst, Immediate src) {
-    immediate_arithmetic_op(0x7, dst, src);
-  }
-
-  void and_(Register dst, Register src) {
-    arithmetic_op(0x23, dst, src);
-  }
-
-  void and_(Register dst, const Operand& src) {
-    arithmetic_op(0x23, dst, src);
-  }
-
-  void and_(const Operand& dst, Register src) {
-    arithmetic_op(0x21, src, dst);
-  }
-
-  void and_(Register dst, Immediate src) {
-    immediate_arithmetic_op(0x4, dst, src);
-  }
-
-  void and_(const Operand& dst, Immediate src) {
-    immediate_arithmetic_op(0x4, dst, src);
-  }
-
-  void andl(Register dst, Immediate src) {
-    immediate_arithmetic_op_32(0x4, dst, src);
-  }
-
-  void andl(Register dst, Register src) {
-    arithmetic_op_32(0x23, dst, src);
-  }
-
-  void andl(Register dst, const Operand& src) {
-    arithmetic_op_32(0x23, dst, src);
-  }
-
-  void andb(Register dst, Immediate src) {
-    immediate_arithmetic_op_8(0x4, dst, src);
-  }
-
-  void decq(Register dst);
-  void decq(const Operand& dst);
-  void decl(Register dst);
-  void decl(const Operand& dst);
-  void decb(Register dst);
-  void decb(const Operand& dst);
-
-  // Sign-extends rax into rdx:rax.
-  void cqo();
-  // Sign-extends eax into edx:eax.
-  void cdq();
-
-  // Divide rdx:rax by src.  Quotient in rax, remainder in rdx.
-  void idivq(Register src);
-  // Divide edx:eax by lower 32 bits of src.  Quotient in eax, rem. in edx.
-  void idivl(Register src);
-
-  // Signed multiply instructions.
-  void imul(Register src);                               // rdx:rax = rax * src.
-  void imul(Register dst, Register src);                 // dst = dst * src.
-  void imul(Register dst, const Operand& src);           // dst = dst * src.
-  void imul(Register dst, Register src, Immediate imm);  // dst = src * imm.
-  // Signed 32-bit multiply instructions.
-  void imull(Register dst, Register src);                 // dst = dst * src.
-  void imull(Register dst, const Operand& src);           // dst = dst * src.
-  void imull(Register dst, Register src, Immediate imm);  // dst = src * imm.
-
-  void incq(Register dst);
-  void incq(const Operand& dst);
-  void incl(Register dst);
-  void incl(const Operand& dst);
-
-  void lea(Register dst, const Operand& src);
-  void leal(Register dst, const Operand& src);
-
-  // Multiply rax by src, put the result in rdx:rax.
-  void mul(Register src);
-
-  void neg(Register dst);
-  void neg(const Operand& dst);
-  void negl(Register dst);
-
-  void not_(Register dst);
-  void not_(const Operand& dst);
-  void notl(Register dst);
-
-  void or_(Register dst, Register src) {
-    arithmetic_op(0x0B, dst, src);
-  }
-
-  void orl(Register dst, Register src) {
-    arithmetic_op_32(0x0B, dst, src);
-  }
-
-  void or_(Register dst, const Operand& src) {
-    arithmetic_op(0x0B, dst, src);
-  }
-
-  void orl(Register dst, const Operand& src) {
-    arithmetic_op_32(0x0B, dst, src);
-  }
-
-  void or_(const Operand& dst, Register src) {
-    arithmetic_op(0x09, src, dst);
-  }
-
-  void or_(Register dst, Immediate src) {
-    immediate_arithmetic_op(0x1, dst, src);
-  }
-
-  void orl(Register dst, Immediate src) {
-    immediate_arithmetic_op_32(0x1, dst, src);
-  }
-
-  void or_(const Operand& dst, Immediate src) {
-    immediate_arithmetic_op(0x1, dst, src);
-  }
-
-  void orl(const Operand& dst, Immediate src) {
-    immediate_arithmetic_op_32(0x1, dst, src);
-  }
-
-
-  void rcl(Register dst, Immediate imm8) {
-    shift(dst, imm8, 0x2);
-  }
-
-  void rol(Register dst, Immediate imm8) {
-    shift(dst, imm8, 0x0);
-  }
-
-  void rcr(Register dst, Immediate imm8) {
-    shift(dst, imm8, 0x3);
-  }
-
-  void ror(Register dst, Immediate imm8) {
-    shift(dst, imm8, 0x1);
-  }
-
-  // Shifts dst:src left by cl bits, affecting only dst.
-  void shld(Register dst, Register src);
-
-  // Shifts src:dst right by cl bits, affecting only dst.
-  void shrd(Register dst, Register src);
-
-  // Shifts dst right, duplicating sign bit, by shift_amount bits.
-  // Shifting by 1 is handled efficiently.
-  void sar(Register dst, Immediate shift_amount) {
-    shift(dst, shift_amount, 0x7);
-  }
-
-  // Shifts dst right, duplicating sign bit, by shift_amount bits.
-  // Shifting by 1 is handled efficiently.
-  void sarl(Register dst, Immediate shift_amount) {
-    shift_32(dst, shift_amount, 0x7);
-  }
-
-  // Shifts dst right, duplicating sign bit, by cl % 64 bits.
-  void sar_cl(Register dst) {
-    shift(dst, 0x7);
-  }
-
-  // Shifts dst right, duplicating sign bit, by cl % 64 bits.
-  void sarl_cl(Register dst) {
-    shift_32(dst, 0x7);
-  }
-
-  void shl(Register dst, Immediate shift_amount) {
-    shift(dst, shift_amount, 0x4);
-  }
-
-  void shl_cl(Register dst) {
-    shift(dst, 0x4);
-  }
-
-  void shll_cl(Register dst) {
-    shift_32(dst, 0x4);
-  }
-
-  void shll(Register dst, Immediate shift_amount) {
-    shift_32(dst, shift_amount, 0x4);
-  }
-
-  void shr(Register dst, Immediate shift_amount) {
-    shift(dst, shift_amount, 0x5);
-  }
-
-  void shr_cl(Register dst) {
-    shift(dst, 0x5);
-  }
-
-  void shrl_cl(Register dst) {
-    shift_32(dst, 0x5);
-  }
-
-  void shrl(Register dst, Immediate shift_amount) {
-    shift_32(dst, shift_amount, 0x5);
-  }
-
-  void store_rax(void* dst, RelocInfo::Mode mode);
-  void store_rax(ExternalReference ref);
-
-  void subq(Register dst, Register src) {
-    arithmetic_op(0x2B, dst, src);
-  }
-
-  void subq(Register dst, const Operand& src) {
-    arithmetic_op(0x2B, dst, src);
-  }
-
-  void subq(const Operand& dst, Register src) {
-    arithmetic_op(0x29, src, dst);
-  }
-
-  void subq(Register dst, Immediate src) {
-    immediate_arithmetic_op(0x5, dst, src);
-  }
-
-  void subq(const Operand& dst, Immediate src) {
-    immediate_arithmetic_op(0x5, dst, src);
-  }
-
-  void subl(Register dst, Register src) {
-    arithmetic_op_32(0x2B, dst, src);
-  }
-
-  void subl(Register dst, const Operand& src) {
-    arithmetic_op_32(0x2B, dst, src);
-  }
-
-  void subl(const Operand& dst, Immediate src) {
-    immediate_arithmetic_op_32(0x5, dst, src);
-  }
-
-  void subl(Register dst, Immediate src) {
-    immediate_arithmetic_op_32(0x5, dst, src);
-  }
-
-  void subb(Register dst, Immediate src) {
-    immediate_arithmetic_op_8(0x5, dst, src);
-  }
-
-  void testb(Register dst, Register src);
-  void testb(Register reg, Immediate mask);
-  void testb(const Operand& op, Immediate mask);
-  void testb(const Operand& op, Register reg);
-  void testl(Register dst, Register src);
-  void testl(Register reg, Immediate mask);
-  void testl(const Operand& op, Immediate mask);
-  void testq(const Operand& op, Register reg);
-  void testq(Register dst, Register src);
-  void testq(Register dst, Immediate mask);
-
-  void xor_(Register dst, Register src) {
-    if (dst.code() == src.code()) {
-      arithmetic_op_32(0x33, dst, src);
-    } else {
-      arithmetic_op(0x33, dst, src);
-    }
-  }
-
-  void xorl(Register dst, Register src) {
-    arithmetic_op_32(0x33, dst, src);
-  }
-
-  void xorl(Register dst, const Operand& src) {
-    arithmetic_op_32(0x33, dst, src);
-  }
-
-  void xorl(Register dst, Immediate src) {
-    immediate_arithmetic_op_32(0x6, dst, src);
-  }
-
-  void xorl(const Operand& dst, Immediate src) {
-    immediate_arithmetic_op_32(0x6, dst, src);
-  }
-
-  void xor_(Register dst, const Operand& src) {
-    arithmetic_op(0x33, dst, src);
-  }
-
-  void xor_(const Operand& dst, Register src) {
-    arithmetic_op(0x31, src, dst);
-  }
-
-  void xor_(Register dst, Immediate src) {
-    immediate_arithmetic_op(0x6, dst, src);
-  }
-
-  void xor_(const Operand& dst, Immediate src) {
-    immediate_arithmetic_op(0x6, dst, src);
-  }
-
-  // Bit operations.
-  void bt(const Operand& dst, Register src);
-  void bts(const Operand& dst, Register src);
-
-  // Miscellaneous
-  void clc();
-  void cpuid();
-  void hlt();
-  void int3();
-  void nop();
-  void nop(int n);
-  void rdtsc();
-  void ret(int imm16);
-  void setcc(Condition cc, Register reg);
-
-  // Label operations & relative jumps (PPUM Appendix D)
-  //
-  // Takes a branch opcode (cc) and a label (L) and generates
-  // either a backward branch or a forward branch and links it
-  // to the label fixup chain. Usage:
-  //
-  // Label L;    // unbound label
-  // j(cc, &L);  // forward branch to unbound label
-  // bind(&L);   // bind label to the current pc
-  // j(cc, &L);  // backward branch to bound label
-  // bind(&L);   // illegal: a label may be bound only once
-  //
-  // Note: The same Label can be used for forward and backward branches
-  // but it may be bound only once.
-
-  void bind(Label* L);  // binds an unbound label L to the current code position
-  void bind(NearLabel* L);
-
-  // Calls
-  // Call near relative 32-bit displacement, relative to next instruction.
-  void call(Label* L);
-  void call(Handle<Code> target, RelocInfo::Mode rmode);
-
-  // Calls directly to the given address using a relative offset.
-  // Should only ever be used in Code objects for calls within the
-  // same Code object. Should not be used when generating new code (use labels),
-  // but only when patching existing code.
-  void call(Address target);
-
-  // Call near absolute indirect, address in register
-  void call(Register adr);
-
-  // Call near indirect
-  void call(const Operand& operand);
-
-  // Jumps
-  // Jump short or near relative.
-  // Use a 32-bit signed displacement.
-  void jmp(Label* L);  // unconditional jump to L
-  void jmp(Handle<Code> target, RelocInfo::Mode rmode);
-
-  // Jump near absolute indirect (r64)
-  void jmp(Register adr);
-
-  // Jump near absolute indirect (m64)
-  void jmp(const Operand& src);
-
-  // Short jump
-  void jmp(NearLabel* L);
-
-  // Conditional jumps
-  void j(Condition cc, Label* L);
-  void j(Condition cc, Handle<Code> target, RelocInfo::Mode rmode);
-
-  // Conditional short jump
-  void j(Condition cc, NearLabel* L, Hint hint = no_hint);
-
-  // Floating-point operations
-  void fld(int i);
-
-  void fld1();
-  void fldz();
-  void fldpi();
-  void fldln2();
-
-  void fld_s(const Operand& adr);
-  void fld_d(const Operand& adr);
-
-  void fstp_s(const Operand& adr);
-  void fstp_d(const Operand& adr);
-  void fstp(int index);
-
-  void fild_s(const Operand& adr);
-  void fild_d(const Operand& adr);
-
-  void fist_s(const Operand& adr);
-
-  void fistp_s(const Operand& adr);
-  void fistp_d(const Operand& adr);
-
-  void fisttp_s(const Operand& adr);
-  void fisttp_d(const Operand& adr);
-
-  void fabs();
-  void fchs();
-
-  void fadd(int i);
-  void fsub(int i);
-  void fmul(int i);
-  void fdiv(int i);
-
-  void fisub_s(const Operand& adr);
-
-  void faddp(int i = 1);
-  void fsubp(int i = 1);
-  void fsubrp(int i = 1);
-  void fmulp(int i = 1);
-  void fdivp(int i = 1);
-  void fprem();
-  void fprem1();
-
-  void fxch(int i = 1);
-  void fincstp();
-  void ffree(int i = 0);
-
-  void ftst();
-  void fucomp(int i);
-  void fucompp();
-  void fucomi(int i);
-  void fucomip();
-
-  void fcompp();
-  void fnstsw_ax();
-  void fwait();
-  void fnclex();
-
-  void fsin();
-  void fcos();
-  void fyl2x();
-
-  void frndint();
-
-  void sahf();
-
-  // SSE2 instructions
-  void movd(XMMRegister dst, Register src);
-  void movd(Register dst, XMMRegister src);
-  void movq(XMMRegister dst, Register src);
-  void movq(Register dst, XMMRegister src);
-  void extractps(Register dst, XMMRegister src, byte imm8);
-
-  void movsd(const Operand& dst, XMMRegister src);
-  void movsd(XMMRegister dst, XMMRegister src);
-  void movsd(XMMRegister dst, const Operand& src);
-
-  void movdqa(const Operand& dst, XMMRegister src);
-  void movdqa(XMMRegister dst, const Operand& src);
-
-  void movss(XMMRegister dst, const Operand& src);
-  void movss(const Operand& dst, XMMRegister src);
-
-  void cvttss2si(Register dst, const Operand& src);
-  void cvttss2si(Register dst, XMMRegister src);
-  void cvttsd2si(Register dst, const Operand& src);
-  void cvttsd2si(Register dst, XMMRegister src);
-  void cvttsd2siq(Register dst, XMMRegister src);
-
-  void cvtlsi2sd(XMMRegister dst, const Operand& src);
-  void cvtlsi2sd(XMMRegister dst, Register src);
-  void cvtqsi2sd(XMMRegister dst, const Operand& src);
-  void cvtqsi2sd(XMMRegister dst, Register src);
-
-  void cvtlsi2ss(XMMRegister dst, Register src);
-
-  void cvtss2sd(XMMRegister dst, XMMRegister src);
-  void cvtss2sd(XMMRegister dst, const Operand& src);
-  void cvtsd2ss(XMMRegister dst, XMMRegister src);
-
-  void cvtsd2si(Register dst, XMMRegister src);
-  void cvtsd2siq(Register dst, XMMRegister src);
-
-  void addsd(XMMRegister dst, XMMRegister src);
-  void subsd(XMMRegister dst, XMMRegister src);
-  void mulsd(XMMRegister dst, XMMRegister src);
-  void divsd(XMMRegister dst, XMMRegister src);
-
-  void andpd(XMMRegister dst, XMMRegister src);
-  void orpd(XMMRegister dst, XMMRegister src);
-  void xorpd(XMMRegister dst, XMMRegister src);
-  void sqrtsd(XMMRegister dst, XMMRegister src);
-
-  void ucomisd(XMMRegister dst, XMMRegister src);
-  void ucomisd(XMMRegister dst, const Operand& src);
-
-  void movmskpd(Register dst, XMMRegister src);
-
-  // The first argument is the reg field, the second argument is the r/m field.
-  void emit_sse_operand(XMMRegister dst, XMMRegister src);
-  void emit_sse_operand(XMMRegister reg, const Operand& adr);
-  void emit_sse_operand(XMMRegister dst, Register src);
-  void emit_sse_operand(Register dst, XMMRegister src);
-
-  // Debugging
-  void Print();
-
-  // Check the code size generated from label to here.
-  int SizeOfCodeGeneratedSince(Label* l) { return pc_offset() - l->pos(); }
-
-  // Mark address of the ExitJSFrame code.
-  void RecordJSReturn();
-
-  // Mark address of a debug break slot.
-  void RecordDebugBreakSlot();
-
-  // Record a comment relocation entry that can be used by a disassembler.
-  // Use --code-comments to enable.
-  void RecordComment(const char* msg, bool force = false);
-
-  // Writes a single word of data in the code stream.
-  // Used for inline tables, e.g., jump-tables.
-  void db(uint8_t data);
-  void dd(uint32_t data);
-
-  int pc_offset() const { return static_cast<int>(pc_ - buffer_); }
-
-  PositionsRecorder* positions_recorder() { return &positions_recorder_; }
-
-  // Check if there is less than kGap bytes available in the buffer.
-  // If this is the case, we need to grow the buffer before emitting
-  // an instruction or relocation information.
-  inline bool buffer_overflow() const {
-    return pc_ >= reloc_info_writer.pos() - kGap;
-  }
-
-  // Get the number of bytes available in the buffer.
-  inline int available_space() const {
-    return static_cast<int>(reloc_info_writer.pos() - pc_);
-  }
-
-  static bool IsNop(Address addr) { return *addr == 0x90; }
-
-  // Avoid overflows for displacements etc.
-  static const int kMaximalBufferSize = 512*MB;
-  static const int kMinimalBufferSize = 4*KB;
-
- private:
-  byte* addr_at(int pos)  { return buffer_ + pos; }
-  byte byte_at(int pos)  { return buffer_[pos]; }
-  void set_byte_at(int pos, byte value) { buffer_[pos] = value; }
-  uint32_t long_at(int pos)  {
-    return *reinterpret_cast<uint32_t*>(addr_at(pos));
-  }
-  void long_at_put(int pos, uint32_t x)  {
-    *reinterpret_cast<uint32_t*>(addr_at(pos)) = x;
-  }
-
-  // code emission
-  void GrowBuffer();
-
-  void emit(byte x) { *pc_++ = x; }
-  inline void emitl(uint32_t x);
-  inline void emitq(uint64_t x, RelocInfo::Mode rmode);
-  inline void emitw(uint16_t x);
-  inline void emit_code_target(Handle<Code> target, RelocInfo::Mode rmode);
-  void emit(Immediate x) { emitl(x.value_); }
-
-  // Emits a REX prefix that encodes a 64-bit operand size and
-  // the top bit of both register codes.
-  // High bit of reg goes to REX.R, high bit of rm_reg goes to REX.B.
-  // REX.W is set.
-  inline void emit_rex_64(XMMRegister reg, Register rm_reg);
-  inline void emit_rex_64(Register reg, XMMRegister rm_reg);
-  inline void emit_rex_64(Register reg, Register rm_reg);
-
-  // Emits a REX prefix that encodes a 64-bit operand size and
-  // the top bit of the destination, index, and base register codes.
-  // The high bit of reg is used for REX.R, the high bit of op's base
-  // register is used for REX.B, and the high bit of op's index register
-  // is used for REX.X.  REX.W is set.
-  inline void emit_rex_64(Register reg, const Operand& op);
-  inline void emit_rex_64(XMMRegister reg, const Operand& op);
-
-  // Emits a REX prefix that encodes a 64-bit operand size and
-  // the top bit of the register code.
-  // The high bit of register is used for REX.B.
-  // REX.W is set and REX.R and REX.X are clear.
-  inline void emit_rex_64(Register rm_reg);
-
-  // Emits a REX prefix that encodes a 64-bit operand size and
-  // the top bit of the index and base register codes.
-  // The high bit of op's base register is used for REX.B, and the high
-  // bit of op's index register is used for REX.X.
-  // REX.W is set and REX.R clear.
-  inline void emit_rex_64(const Operand& op);
-
-  // Emit a REX prefix that only sets REX.W to choose a 64-bit operand size.
-  void emit_rex_64() { emit(0x48); }
-
-  // High bit of reg goes to REX.R, high bit of rm_reg goes to REX.B.
-  // REX.W is clear.
-  inline void emit_rex_32(Register reg, Register rm_reg);
-
-  // The high bit of reg is used for REX.R, the high bit of op's base
-  // register is used for REX.B, and the high bit of op's index register
-  // is used for REX.X.  REX.W is cleared.
-  inline void emit_rex_32(Register reg, const Operand& op);
-
-  // High bit of rm_reg goes to REX.B.
-  // REX.W, REX.R and REX.X are clear.
-  inline void emit_rex_32(Register rm_reg);
-
-  // High bit of base goes to REX.B and high bit of index to REX.X.
-  // REX.W and REX.R are clear.
-  inline void emit_rex_32(const Operand& op);
-
-  // High bit of reg goes to REX.R, high bit of rm_reg goes to REX.B.
-  // REX.W is cleared.  If no REX bits are set, no byte is emitted.
-  inline void emit_optional_rex_32(Register reg, Register rm_reg);
-
-  // The high bit of reg is used for REX.R, the high bit of op's base
-  // register is used for REX.B, and the high bit of op's index register
-  // is used for REX.X.  REX.W is cleared.  If no REX bits are set, nothing
-  // is emitted.
-  inline void emit_optional_rex_32(Register reg, const Operand& op);
-
-  // As for emit_optional_rex_32(Register, Register), except that
-  // the registers are XMM registers.
-  inline void emit_optional_rex_32(XMMRegister reg, XMMRegister base);
-
-  // As for emit_optional_rex_32(Register, Register), except that
-  // one of the registers is an XMM registers.
-  inline void emit_optional_rex_32(XMMRegister reg, Register base);
-
-  // As for emit_optional_rex_32(Register, Register), except that
-  // one of the registers is an XMM registers.
-  inline void emit_optional_rex_32(Register reg, XMMRegister base);
-
-  // As for emit_optional_rex_32(Register, const Operand&), except that
-  // the register is an XMM register.
-  inline void emit_optional_rex_32(XMMRegister reg, const Operand& op);
-
-  // Optionally do as emit_rex_32(Register) if the register number has
-  // the high bit set.
-  inline void emit_optional_rex_32(Register rm_reg);
-
-  // Optionally do as emit_rex_32(const Operand&) if the operand register
-  // numbers have a high bit set.
-  inline void emit_optional_rex_32(const Operand& op);
-
-
-  // Emit the ModR/M byte, and optionally the SIB byte and
-  // 1- or 4-byte offset for a memory operand.  Also encodes
-  // the second operand of the operation, a register or operation
-  // subcode, into the reg field of the ModR/M byte.
-  void emit_operand(Register reg, const Operand& adr) {
-    emit_operand(reg.low_bits(), adr);
-  }
-
-  // Emit the ModR/M byte, and optionally the SIB byte and
-  // 1- or 4-byte offset for a memory operand.  Also used to encode
-  // a three-bit opcode extension into the ModR/M byte.
-  void emit_operand(int rm, const Operand& adr);
-
-  // Emit a ModR/M byte with registers coded in the reg and rm_reg fields.
-  void emit_modrm(Register reg, Register rm_reg) {
-    emit(0xC0 | reg.low_bits() << 3 | rm_reg.low_bits());
-  }
-
-  // Emit a ModR/M byte with an operation subcode in the reg field and
-  // a register in the rm_reg field.
-  void emit_modrm(int code, Register rm_reg) {
-    ASSERT(is_uint3(code));
-    emit(0xC0 | code << 3 | rm_reg.low_bits());
-  }
-
-  // Emit the code-object-relative offset of the label's position
-  inline void emit_code_relative_offset(Label* label);
-
-  // Emit machine code for one of the operations ADD, ADC, SUB, SBC,
-  // AND, OR, XOR, or CMP.  The encodings of these operations are all
-  // similar, differing just in the opcode or in the reg field of the
-  // ModR/M byte.
-  void arithmetic_op_16(byte opcode, Register reg, Register rm_reg);
-  void arithmetic_op_16(byte opcode, Register reg, const Operand& rm_reg);
-  void arithmetic_op_32(byte opcode, Register reg, Register rm_reg);
-  void arithmetic_op_32(byte opcode, Register reg, const Operand& rm_reg);
-  void arithmetic_op(byte opcode, Register reg, Register rm_reg);
-  void arithmetic_op(byte opcode, Register reg, const Operand& rm_reg);
-  void immediate_arithmetic_op(byte subcode, Register dst, Immediate src);
-  void immediate_arithmetic_op(byte subcode, const Operand& dst, Immediate src);
-  // Operate on a byte in memory or register.
-  void immediate_arithmetic_op_8(byte subcode,
-                                 Register dst,
-                                 Immediate src);
-  void immediate_arithmetic_op_8(byte subcode,
-                                 const Operand& dst,
-                                 Immediate src);
-  // Operate on a word in memory or register.
-  void immediate_arithmetic_op_16(byte subcode,
-                                  Register dst,
-                                  Immediate src);
-  void immediate_arithmetic_op_16(byte subcode,
-                                  const Operand& dst,
-                                  Immediate src);
-  // Operate on a 32-bit word in memory or register.
-  void immediate_arithmetic_op_32(byte subcode,
-                                  Register dst,
-                                  Immediate src);
-  void immediate_arithmetic_op_32(byte subcode,
-                                  const Operand& dst,
-                                  Immediate src);
-
-  // Emit machine code for a shift operation.
-  void shift(Register dst, Immediate shift_amount, int subcode);
-  void shift_32(Register dst, Immediate shift_amount, int subcode);
-  // Shift dst by cl % 64 bits.
-  void shift(Register dst, int subcode);
-  void shift_32(Register dst, int subcode);
-
-  void emit_farith(int b1, int b2, int i);
-
-  // labels
-  // void print(Label* L);
-  void bind_to(Label* L, int pos);
-
-  // record reloc info for current pc_
-  void RecordRelocInfo(RelocInfo::Mode rmode, intptr_t data = 0);
-
-  friend class CodePatcher;
-  friend class EnsureSpace;
-  friend class RegExpMacroAssemblerX64;
-
-  // Code buffer:
-  // The buffer into which code and relocation info are generated.
-  byte* buffer_;
-  int buffer_size_;
-  // True if the assembler owns the buffer, false if buffer is external.
-  bool own_buffer_;
-  // A previously allocated buffer of kMinimalBufferSize bytes, or NULL.
-  static byte* spare_buffer_;
-
-  // code generation
-  byte* pc_;  // the program counter; moves forward
-  RelocInfoWriter reloc_info_writer;
-
-  List< Handle<Code> > code_targets_;
-  // push-pop elimination
-  byte* last_pc_;
-
-  PositionsRecorder positions_recorder_;
-  friend class PositionsRecorder;
-};
-
-
-// Helper class that ensures that there is enough space for generating
-// instructions and relocation information.  The constructor makes
-// sure that there is enough space and (in debug mode) the destructor
-// checks that we did not generate too much.
-class EnsureSpace BASE_EMBEDDED {
- public:
-  explicit EnsureSpace(Assembler* assembler) : assembler_(assembler) {
-    if (assembler_->buffer_overflow()) assembler_->GrowBuffer();
-#ifdef DEBUG
-    space_before_ = assembler_->available_space();
-#endif
-  }
-
-#ifdef DEBUG
-  ~EnsureSpace() {
-    int bytes_generated = space_before_ - assembler_->available_space();
-    ASSERT(bytes_generated < assembler_->kGap);
-  }
-#endif
-
- private:
-  Assembler* assembler_;
-#ifdef DEBUG
-  int space_before_;
-#endif
-};
-
-} }  // namespace v8::internal
-
-#endif  // V8_X64_ASSEMBLER_X64_H_