therubyracer 0.4.9-x86-linux

data/ext/v8/upstream/2.0.6/src/platform.h

@@ -0,0 +1,556 @@
+// Copyright 2006-2008 the V8 project authors. All rights reserved.
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+//       notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+//       copyright notice, this list of conditions and the following
+//       disclaimer in the documentation and/or other materials provided
+//       with the distribution.
+//     * Neither the name of Google Inc. nor the names of its
+//       contributors may be used to endorse or promote products derived
+//       from this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+// This module contains the platform-specific code. This make the rest of the
+// code less dependent on operating system, compilers and runtime libraries.
+// This module does specifically not deal with differences between different
+// processor architecture.
+// The platform classes have the same definition for all platforms. The
+// implementation for a particular platform is put in platform_<os>.cc.
+// The build system then uses the implementation for the target platform.
+//
+// This design has been chosen because it is simple and fast. Alternatively,
+// the platform dependent classes could have been implemented using abstract
+// superclasses with virtual methods and having specializations for each
+// platform. This design was rejected because it was more complicated and
+// slower. It would require factory methods for selecting the right
+// implementation and the overhead of virtual methods for performance
+// sensitive like mutex locking/unlocking.
+
+#ifndef V8_PLATFORM_H_
+#define V8_PLATFORM_H_
+
+#define V8_INFINITY INFINITY
+
+// Windows specific stuff.
+#ifdef WIN32
+
+// Microsoft Visual C++ specific stuff.
+#ifdef _MSC_VER
+
+enum {
+  FP_NAN,
+  FP_INFINITE,
+  FP_ZERO,
+  FP_SUBNORMAL,
+  FP_NORMAL
+};
+
+#undef V8_INFINITY
+#define V8_INFINITY HUGE_VAL
+
+namespace v8 {
+namespace internal {
+int isfinite(double x);
+} }
+int isnan(double x);
+int isinf(double x);
+int isless(double x, double y);
+int isgreater(double x, double y);
+int fpclassify(double x);
+int signbit(double x);
+
+int strncasecmp(const char* s1, const char* s2, int n);
+
+#endif  // _MSC_VER
+
+// Random is missing on both Visual Studio and MinGW.
+int random();
+
+#endif  // WIN32
+
+// GCC specific stuff
+#ifdef __GNUC__
+
+// Needed for va_list on at least MinGW and Android.
+#include <stdarg.h>
+
+#define __GNUC_VERSION__ (__GNUC__ * 10000 + __GNUC_MINOR__ * 100)
+
+// Unfortunately, the INFINITY macro cannot be used with the '-pedantic'
+// warning flag and certain versions of GCC due to a bug:
+// http://gcc.gnu.org/bugzilla/show_bug.cgi?id=11931
+// For now, we use the more involved template-based version from <limits>, but
+// only when compiling with GCC versions affected by the bug (2.96.x - 4.0.x)
+// __GNUC_PREREQ is not defined in GCC for Mac OS X, so we define our own macro
+#if __GNUC_VERSION__ >= 29600 && __GNUC_VERSION__ < 40100
+#include <limits>
+#undef V8_INFINITY
+#define V8_INFINITY std::numeric_limits<double>::infinity()
+#endif
+
+#endif  // __GNUC__
+
+namespace v8 {
+namespace internal {
+
+class Semaphore;
+
+double ceiling(double x);
+double modulo(double x, double y);
+
+// Forward declarations.
+class Socket;
+
+// ----------------------------------------------------------------------------
+// OS
+//
+// This class has static methods for the different platform specific
+// functions. Add methods here to cope with differences between the
+// supported platforms.
+
+class OS {
+ public:
+  // Initializes the platform OS support. Called once at VM startup.
+  static void Setup();
+
+  // Returns the accumulated user time for thread. This routine
+  // can be used for profiling. The implementation should
+  // strive for high-precision timer resolution, preferable
+  // micro-second resolution.
+  static int GetUserTime(uint32_t* secs,  uint32_t* usecs);
+
+  // Get a tick counter normalized to one tick per microsecond.
+  // Used for calculating time intervals.
+  static int64_t Ticks();
+
+  // Returns current time as the number of milliseconds since
+  // 00:00:00 UTC, January 1, 1970.
+  static double TimeCurrentMillis();
+
+  // Returns a string identifying the current time zone. The
+  // timestamp is used for determining if DST is in effect.
+  static const char* LocalTimezone(double time);
+
+  // Returns the local time offset in milliseconds east of UTC without
+  // taking daylight savings time into account.
+  static double LocalTimeOffset();
+
+  // Returns the daylight savings offset for the given time.
+  static double DaylightSavingsOffset(double time);
+
+  static FILE* FOpen(const char* path, const char* mode);
+
+  // Log file open mode is platform-dependent due to line ends issues.
+  static const char* LogFileOpenMode;
+
+  // Print output to console. This is mostly used for debugging output.
+  // On platforms that has standard terminal output, the output
+  // should go to stdout.
+  static void Print(const char* format, ...);
+  static void VPrint(const char* format, va_list args);
+
+  // Print error output to console. This is mostly used for error message
+  // output. On platforms that has standard terminal output, the output
+  // should go to stderr.
+  static void PrintError(const char* format, ...);
+  static void VPrintError(const char* format, va_list args);
+
+  // Allocate/Free memory used by JS heap. Pages are readable/writable, but
+  // they are not guaranteed to be executable unless 'executable' is true.
+  // Returns the address of allocated memory, or NULL if failed.
+  static void* Allocate(const size_t requested,
+                        size_t* allocated,
+                        bool is_executable);
+  static void Free(void* address, const size_t size);
+  // Get the Alignment guaranteed by Allocate().
+  static size_t AllocateAlignment();
+
+#ifdef ENABLE_HEAP_PROTECTION
+  // Protect/unprotect a block of memory by marking it read-only/writable.
+  static void Protect(void* address, size_t size);
+  static void Unprotect(void* address, size_t size, bool is_executable);
+#endif
+
+  // Returns an indication of whether a pointer is in a space that
+  // has been allocated by Allocate().  This method may conservatively
+  // always return false, but giving more accurate information may
+  // improve the robustness of the stack dump code in the presence of
+  // heap corruption.
+  static bool IsOutsideAllocatedSpace(void* pointer);
+
+  // Sleep for a number of milliseconds.
+  static void Sleep(const int milliseconds);
+
+  // Abort the current process.
+  static void Abort();
+
+  // Debug break.
+  static void DebugBreak();
+
+  // Walk the stack.
+  static const int kStackWalkError = -1;
+  static const int kStackWalkMaxNameLen = 256;
+  static const int kStackWalkMaxTextLen = 256;
+  struct StackFrame {
+    void* address;
+    char text[kStackWalkMaxTextLen];
+  };
+
+  static int StackWalk(Vector<StackFrame> frames);
+
+  // Factory method for creating platform dependent Mutex.
+  // Please use delete to reclaim the storage for the returned Mutex.
+  static Mutex* CreateMutex();
+
+  // Factory method for creating platform dependent Semaphore.
+  // Please use delete to reclaim the storage for the returned Semaphore.
+  static Semaphore* CreateSemaphore(int count);
+
+  // Factory method for creating platform dependent Socket.
+  // Please use delete to reclaim the storage for the returned Socket.
+  static Socket* CreateSocket();
+
+  class MemoryMappedFile {
+   public:
+    static MemoryMappedFile* create(const char* name, int size, void* initial);
+    virtual ~MemoryMappedFile() { }
+    virtual void* memory() = 0;
+  };
+
+  // Safe formatting print. Ensures that str is always null-terminated.
+  // Returns the number of chars written, or -1 if output was truncated.
+  static int SNPrintF(Vector<char> str, const char* format, ...);
+  static int VSNPrintF(Vector<char> str,
+                       const char* format,
+                       va_list args);
+
+  static char* StrChr(char* str, int c);
+  static void StrNCpy(Vector<char> dest, const char* src, size_t n);
+
+  // Support for profiler.  Can do nothing, in which case ticks
+  // occuring in shared libraries will not be properly accounted
+  // for.
+  static void LogSharedLibraryAddresses();
+
+  // The return value indicates the CPU features we are sure of because of the
+  // OS.  For example MacOSX doesn't run on any x86 CPUs that don't have SSE2
+  // instructions.
+  // This is a little messy because the interpretation is subject to the cross
+  // of the CPU and the OS.  The bits in the answer correspond to the bit
+  // positions indicated by the members of the CpuFeature enum from globals.h
+  static uint64_t CpuFeaturesImpliedByPlatform();
+
+  // Returns the double constant NAN
+  static double nan_value();
+
+  // Support runtime detection of VFP3 on ARM CPUs.
+  static bool ArmCpuHasFeature(CpuFeature feature);
+
+  // Returns the activation frame alignment constraint or zero if
+  // the platform doesn't care. Guaranteed to be a power of two.
+  static int ActivationFrameAlignment();
+
+ private:
+  static const int msPerSecond = 1000;
+
+  DISALLOW_IMPLICIT_CONSTRUCTORS(OS);
+};
+
+
+class VirtualMemory {
+ public:
+  // Reserves virtual memory with size.
+  explicit VirtualMemory(size_t size);
+  ~VirtualMemory();
+
+  // Returns whether the memory has been reserved.
+  bool IsReserved();
+
+  // Returns the start address of the reserved memory.
+  void* address() {
+    ASSERT(IsReserved());
+    return address_;
+  };
+
+  // Returns the size of the reserved memory.
+  size_t size() { return size_; }
+
+  // Commits real memory. Returns whether the operation succeeded.
+  bool Commit(void* address, size_t size, bool is_executable);
+
+  // Uncommit real memory.  Returns whether the operation succeeded.
+  bool Uncommit(void* address, size_t size);
+
+ private:
+  void* address_;  // Start address of the virtual memory.
+  size_t size_;  // Size of the virtual memory.
+};
+
+
+// ----------------------------------------------------------------------------
+// ThreadHandle
+//
+// A ThreadHandle represents a thread identifier for a thread. The ThreadHandle
+// does not own the underlying os handle. Thread handles can be used for
+// refering to threads and testing equality.
+
+class ThreadHandle {
+ public:
+  enum Kind { SELF, INVALID };
+  explicit ThreadHandle(Kind kind);
+
+  // Destructor.
+  ~ThreadHandle();
+
+  // Test for thread running.
+  bool IsSelf() const;
+
+  // Test for valid thread handle.
+  bool IsValid() const;
+
+  // Get platform-specific data.
+  class PlatformData;
+  PlatformData* thread_handle_data() { return data_; }
+
+  // Initialize the handle to kind
+  void Initialize(Kind kind);
+
+ private:
+  PlatformData* data_;  // Captures platform dependent data.
+};
+
+
+// ----------------------------------------------------------------------------
+// Thread
+//
+// Thread objects are used for creating and running threads. When the start()
+// method is called the new thread starts running the run() method in the new
+// thread. The Thread object should not be deallocated before the thread has
+// terminated.
+
+class Thread: public ThreadHandle {
+ public:
+  // Opaque data type for thread-local storage keys.
+  enum LocalStorageKey {};
+
+  // Create new thread.
+  Thread();
+  virtual ~Thread();
+
+  // Start new thread by calling the Run() method in the new thread.
+  void Start();
+
+  // Wait until thread terminates.
+  void Join();
+
+  // Abstract method for run handler.
+  virtual void Run() = 0;
+
+  // Thread-local storage.
+  static LocalStorageKey CreateThreadLocalKey();
+  static void DeleteThreadLocalKey(LocalStorageKey key);
+  static void* GetThreadLocal(LocalStorageKey key);
+  static int GetThreadLocalInt(LocalStorageKey key) {
+    return static_cast<int>(reinterpret_cast<intptr_t>(GetThreadLocal(key)));
+  }
+  static void SetThreadLocal(LocalStorageKey key, void* value);
+  static void SetThreadLocalInt(LocalStorageKey key, int value) {
+    SetThreadLocal(key, reinterpret_cast<void*>(static_cast<intptr_t>(value)));
+  }
+  static bool HasThreadLocal(LocalStorageKey key) {
+    return GetThreadLocal(key) != NULL;
+  }
+
+  // A hint to the scheduler to let another thread run.
+  static void YieldCPU();
+
+ private:
+  class PlatformData;
+  PlatformData* data_;
+  DISALLOW_COPY_AND_ASSIGN(Thread);
+};
+
+
+// ----------------------------------------------------------------------------
+// Mutex
+//
+// Mutexes are used for serializing access to non-reentrant sections of code.
+// The implementations of mutex should allow for nested/recursive locking.
+
+class Mutex {
+ public:
+  virtual ~Mutex() {}
+
+  // Locks the given mutex. If the mutex is currently unlocked, it becomes
+  // locked and owned by the calling thread, and immediately. If the mutex
+  // is already locked by another thread, suspends the calling thread until
+  // the mutex is unlocked.
+  virtual int Lock() = 0;
+
+  // Unlocks the given mutex. The mutex is assumed to be locked and owned by
+  // the calling thread on entrance.
+  virtual int Unlock() = 0;
+};
+
+
+// ----------------------------------------------------------------------------
+// ScopedLock
+//
+// Stack-allocated ScopedLocks provide block-scoped locking and unlocking
+// of a mutex.
+class ScopedLock {
+ public:
+  explicit ScopedLock(Mutex* mutex): mutex_(mutex) {
+    mutex_->Lock();
+  }
+  ~ScopedLock() {
+    mutex_->Unlock();
+  }
+
+ private:
+  Mutex* mutex_;
+  DISALLOW_COPY_AND_ASSIGN(ScopedLock);
+};
+
+
+// ----------------------------------------------------------------------------
+// Semaphore
+//
+// A semaphore object is a synchronization object that maintains a count. The
+// count is decremented each time a thread completes a wait for the semaphore
+// object and incremented each time a thread signals the semaphore. When the
+// count reaches zero,  threads waiting for the semaphore blocks until the
+// count becomes non-zero.
+
+class Semaphore {
+ public:
+  virtual ~Semaphore() {}
+
+  // Suspends the calling thread until the semaphore counter is non zero
+  // and then decrements the semaphore counter.
+  virtual void Wait() = 0;
+
+  // Suspends the calling thread until the counter is non zero or the timeout
+  // time has passsed. If timeout happens the return value is false and the
+  // counter is unchanged. Otherwise the semaphore counter is decremented and
+  // true is returned. The timeout value is specified in microseconds.
+  virtual bool Wait(int timeout) = 0;
+
+  // Increments the semaphore counter.
+  virtual void Signal() = 0;
+};
+
+
+// ----------------------------------------------------------------------------
+// Socket
+//
+
+class Socket {
+ public:
+  virtual ~Socket() {}
+
+  // Server initialization.
+  virtual bool Bind(const int port) = 0;
+  virtual bool Listen(int backlog) const = 0;
+  virtual Socket* Accept() const = 0;
+
+  // Client initialization.
+  virtual bool Connect(const char* host, const char* port) = 0;
+
+  // Shutdown socket for both read and write. This causes blocking Send and
+  // Receive calls to exit. After Shutdown the Socket object cannot be used for
+  // any communication.
+  virtual bool Shutdown() = 0;
+
+  // Data Transimission
+  virtual int Send(const char* data, int len) const = 0;
+  virtual int Receive(char* data, int len) const = 0;
+
+  // Set the value of the SO_REUSEADDR socket option.
+  virtual bool SetReuseAddress(bool reuse_address) = 0;
+
+  virtual bool IsValid() const = 0;
+
+  static bool Setup();
+  static int LastError();
+  static uint16_t HToN(uint16_t value);
+  static uint16_t NToH(uint16_t value);
+  static uint32_t HToN(uint32_t value);
+  static uint32_t NToH(uint32_t value);
+};
+
+
+#ifdef ENABLE_LOGGING_AND_PROFILING
+// ----------------------------------------------------------------------------
+// Sampler
+//
+// A sampler periodically samples the state of the VM and optionally
+// (if used for profiling) the program counter and stack pointer for
+// the thread that created it.
+
+// TickSample captures the information collected for each sample.
+class TickSample {
+ public:
+  TickSample() : pc(0), sp(0), fp(0), state(OTHER), frames_count(0) {}
+  uintptr_t pc;  // Instruction pointer.
+  uintptr_t sp;  // Stack pointer.
+  uintptr_t fp;  // Frame pointer.
+  StateTag state;   // The state of the VM.
+  static const int kMaxFramesCount = 100;
+  EmbeddedVector<Address, kMaxFramesCount> stack;  // Call stack.
+  int frames_count;  // Number of captured frames.
+};
+
+class Sampler {
+ public:
+  // Initialize sampler.
+  explicit Sampler(int interval, bool profiling);
+  virtual ~Sampler();
+
+  // Performs stack sampling.
+  virtual void SampleStack(TickSample* sample) = 0;
+
+  // This method is called for each sampling period with the current
+  // program counter.
+  virtual void Tick(TickSample* sample) = 0;
+
+  // Start and stop sampler.
+  void Start();
+  void Stop();
+
+  // Is the sampler used for profiling.
+  inline bool IsProfiling() { return profiling_; }
+
+  // Whether the sampler is running (that is, consumes resources).
+  inline bool IsActive() { return active_; }
+
+  class PlatformData;
+
+ private:
+  const int interval_;
+  const bool profiling_;
+  bool active_;
+  PlatformData* data_;  // Platform specific data.
+  DISALLOW_IMPLICIT_CONSTRUCTORS(Sampler);
+};
+
+#endif  // ENABLE_LOGGING_AND_PROFILING
+
+} }  // namespace v8::internal
+
+#endif  // V8_PLATFORM_H_