therubyracer-heroku 0.8.1.pre2

data/ext/v8/upstream/2.3.3/include/v8-debug.h

@@ -0,0 +1,381 @@
+// Copyright 2008 the V8 project authors. All rights reserved.
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+//       notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+//       copyright notice, this list of conditions and the following
+//       disclaimer in the documentation and/or other materials provided
+//       with the distribution.
+//     * Neither the name of Google Inc. nor the names of its
+//       contributors may be used to endorse or promote products derived
+//       from this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#ifndef V8_V8_DEBUG_H_
+#define V8_V8_DEBUG_H_
+
+#include "v8.h"
+
+#ifdef _WIN32
+typedef int int32_t;
+typedef unsigned int uint32_t;
+typedef unsigned short uint16_t;  // NOLINT
+typedef long long int64_t;  // NOLINT
+
+// Setup for Windows DLL export/import. See v8.h in this directory for
+// information on how to build/use V8 as a DLL.
+#if defined(BUILDING_V8_SHARED) && defined(USING_V8_SHARED)
+#error both BUILDING_V8_SHARED and USING_V8_SHARED are set - please check the\
+  build configuration to ensure that at most one of these is set
+#endif
+
+#ifdef BUILDING_V8_SHARED
+#define EXPORT __declspec(dllexport)
+#elif USING_V8_SHARED
+#define EXPORT __declspec(dllimport)
+#else
+#define EXPORT
+#endif
+
+#else  // _WIN32
+
+// Setup for Linux shared library export. See v8.h in this directory for
+// information on how to build/use V8 as shared library.
+#if defined(__GNUC__) && (__GNUC__ >= 4) && defined(V8_SHARED)
+#define EXPORT __attribute__ ((visibility("default")))
+#else  // defined(__GNUC__) && (__GNUC__ >= 4)
+#define EXPORT
+#endif  // defined(__GNUC__) && (__GNUC__ >= 4)
+
+#endif  // _WIN32
+
+
+/**
+ * Debugger support for the V8 JavaScript engine.
+ */
+namespace v8 {
+
+// Debug events which can occur in the V8 JavaScript engine.
+enum DebugEvent {
+  Break = 1,
+  Exception = 2,
+  NewFunction = 3,
+  BeforeCompile = 4,
+  AfterCompile  = 5,
+  ScriptCollected = 6,
+  BreakForCommand = 7
+};
+
+
+class EXPORT Debug {
+ public:
+  /**
+   * A client object passed to the v8 debugger whose ownership will be taken by
+   * it. v8 is always responsible for deleting the object.
+   */
+  class ClientData {
+   public:
+    virtual ~ClientData() {}
+  };
+
+
+  /**
+   * A message object passed to the debug message handler.
+   */
+  class Message {
+   public:
+    /**
+     * Check type of message.
+     */
+    virtual bool IsEvent() const = 0;
+    virtual bool IsResponse() const = 0;
+    virtual DebugEvent GetEvent() const = 0;
+
+    /**
+     * Indicate whether this is a response to a continue command which will
+     * start the VM running after this is processed.
+     */
+    virtual bool WillStartRunning() const = 0;
+
+    /**
+     * Access to execution state and event data. Don't store these cross
+     * callbacks as their content becomes invalid. These objects are from the
+     * debugger event that started the debug message loop.
+     */
+    virtual Handle<Object> GetExecutionState() const = 0;
+    virtual Handle<Object> GetEventData() const = 0;
+
+    /**
+     * Get the debugger protocol JSON.
+     */
+    virtual Handle<String> GetJSON() const = 0;
+
+    /**
+     * Get the context active when the debug event happened. Note this is not
+     * the current active context as the JavaScript part of the debugger is
+     * running in it's own context which is entered at this point.
+     */
+    virtual Handle<Context> GetEventContext() const = 0;
+
+    /**
+     * Client data passed with the corresponding request if any. This is the
+     * client_data data value passed into Debug::SendCommand along with the
+     * request that led to the message or NULL if the message is an event. The
+     * debugger takes ownership of the data and will delete it even if there is
+     * no message handler.
+     */
+    virtual ClientData* GetClientData() const = 0;
+
+    virtual ~Message() {}
+  };
+  
+
+  /**
+   * An event details object passed to the debug event listener.
+   */
+  class EventDetails {
+   public:
+    /**
+     * Event type.
+     */
+    virtual DebugEvent GetEvent() const = 0;
+
+    /**
+     * Access to execution state and event data of the debug event. Don't store
+     * these cross callbacks as their content becomes invalid.
+     */
+    virtual Handle<Object> GetExecutionState() const = 0;
+    virtual Handle<Object> GetEventData() const = 0;
+
+    /**
+     * Get the context active when the debug event happened. Note this is not
+     * the current active context as the JavaScript part of the debugger is
+     * running in it's own context which is entered at this point.
+     */
+    virtual Handle<Context> GetEventContext() const = 0;
+
+    /**
+     * Client data passed with the corresponding callbak whet it was registered.
+     */
+    virtual Handle<Value> GetCallbackData() const = 0;
+
+    /**
+     * Client data passed to DebugBreakForCommand function. The
+     * debugger takes ownership of the data and will delete it even if
+     * there is no message handler.
+     */
+    virtual ClientData* GetClientData() const = 0;
+
+    virtual ~EventDetails() {}
+  };
+
+
+  /**
+   * Debug event callback function.
+   *
+   * \param event the type of the debug event that triggered the callback
+   *   (enum DebugEvent)
+   * \param exec_state execution state (JavaScript object)
+   * \param event_data event specific data (JavaScript object)
+   * \param data value passed by the user to SetDebugEventListener
+   */
+  typedef void (*EventCallback)(DebugEvent event,
+                                Handle<Object> exec_state,
+                                Handle<Object> event_data,
+                                Handle<Value> data);
+
+  /**
+   * Debug event callback function.
+   *
+   * \param event_details object providing information about the debug event
+   *
+   * A EventCallback2 does not take possession of the event data,
+   * and must not rely on the data persisting after the handler returns.
+   */
+  typedef void (*EventCallback2)(const EventDetails& event_details);
+
+  /**
+   * Debug message callback function.
+   *
+   * \param message the debug message handler message object
+   * \param length length of the message
+   * \param client_data the data value passed when registering the message handler
+
+   * A MessageHandler does not take possession of the message string,
+   * and must not rely on the data persisting after the handler returns.
+   *
+   * This message handler is deprecated. Use MessageHandler2 instead.
+   */
+  typedef void (*MessageHandler)(const uint16_t* message, int length,
+                                 ClientData* client_data);
+
+  /**
+   * Debug message callback function.
+   *
+   * \param message the debug message handler message object
+
+   * A MessageHandler does not take possession of the message data,
+   * and must not rely on the data persisting after the handler returns.
+   */
+  typedef void (*MessageHandler2)(const Message& message);
+
+  /**
+   * Debug host dispatch callback function.
+   */
+  typedef void (*HostDispatchHandler)();
+
+  /**
+   * Callback function for the host to ensure debug messages are processed.
+   */
+  typedef void (*DebugMessageDispatchHandler)();
+
+  // Set a C debug event listener.
+  static bool SetDebugEventListener(EventCallback that,
+                                    Handle<Value> data = Handle<Value>());
+  static bool SetDebugEventListener2(EventCallback2 that,
+                                     Handle<Value> data = Handle<Value>());
+
+  // Set a JavaScript debug event listener.
+  static bool SetDebugEventListener(v8::Handle<v8::Object> that,
+                                    Handle<Value> data = Handle<Value>());
+
+  // Break execution of JavaScript.
+  static void DebugBreak();
+
+  // Break execution of JavaScript (this method can be invoked from a
+  // non-VM thread) for further client command execution on a VM
+  // thread. Client data is then passed in EventDetails to
+  // EventCallback at the moment when the VM actually stops.
+  static void DebugBreakForCommand(ClientData* data = NULL);
+
+  // Message based interface. The message protocol is JSON. NOTE the message
+  // handler thread is not supported any more parameter must be false.
+  static void SetMessageHandler(MessageHandler handler,
+                                bool message_handler_thread = false);
+  static void SetMessageHandler2(MessageHandler2 handler);
+  static void SendCommand(const uint16_t* command, int length,
+                          ClientData* client_data = NULL);
+
+  // Dispatch interface.
+  static void SetHostDispatchHandler(HostDispatchHandler handler,
+                                     int period = 100);
+
+  /**
+   * Register a callback function to be called when a debug message has been
+   * received and is ready to be processed. For the debug messages to be
+   * processed V8 needs to be entered, and in certain embedding scenarios this
+   * callback can be used to make sure V8 is entered for the debug message to
+   * be processed. Note that debug messages will only be processed if there is
+   * a V8 break. This can happen automatically by using the option
+   * --debugger-auto-break.
+   * \param provide_locker requires that V8 acquires v8::Locker for you before
+   *        calling handler
+   */
+  static void SetDebugMessageDispatchHandler(
+      DebugMessageDispatchHandler handler, bool provide_locker = false);
+
+ /**
+  * Run a JavaScript function in the debugger.
+  * \param fun the function to call
+  * \param data passed as second argument to the function
+  * With this call the debugger is entered and the function specified is called
+  * with the execution state as the first argument. This makes it possible to
+  * get access to information otherwise not available during normal JavaScript
+  * execution e.g. details on stack frames. Receiver of the function call will
+  * be the debugger context global object, however this is a subject to change.
+  * The following example show a JavaScript function which when passed to 
+  * v8::Debug::Call will return the current line of JavaScript execution.
+  *
+  * \code
+  *   function frame_source_line(exec_state) {
+  *     return exec_state.frame(0).sourceLine();
+  *   }
+  * \endcode
+  */
+  static Local<Value> Call(v8::Handle<v8::Function> fun,
+                            Handle<Value> data = Handle<Value>());
+
+  /**
+   * Returns a mirror object for the given object.
+   */
+  static Local<Value> GetMirror(v8::Handle<v8::Value> obj);
+
+ /**
+  * Enable the V8 builtin debug agent. The debugger agent will listen on the
+  * supplied TCP/IP port for remote debugger connection.
+  * \param name the name of the embedding application
+  * \param port the TCP/IP port to listen on
+  * \param wait_for_connection whether V8 should pause on a first statement
+  *   allowing remote debugger to connect before anything interesting happened
+  */
+  static bool EnableAgent(const char* name, int port,
+                          bool wait_for_connection = false);
+
+  /**
+   * Makes V8 process all pending debug messages.
+   *
+   * From V8 point of view all debug messages come asynchronously (e.g. from
+   * remote debugger) but they all must be handled synchronously: V8 cannot
+   * do 2 things at one time so normal script execution must be interrupted
+   * for a while.
+   *
+   * Generally when message arrives V8 may be in one of 3 states:
+   * 1. V8 is running script; V8 will automatically interrupt and process all
+   * pending messages (however auto_break flag should be enabled);
+   * 2. V8 is suspended on debug breakpoint; in this state V8 is dedicated
+   * to reading and processing debug messages;
+   * 3. V8 is not running at all or has called some long-working C++ function;
+   * by default it means that processing of all debug message will be deferred
+   * until V8 gets control again; however, embedding application may improve
+   * this by manually calling this method.
+   *
+   * It makes sense to call this method whenever a new debug message arrived and
+   * V8 is not already running. Method v8::Debug::SetDebugMessageDispatchHandler
+   * should help with the former condition.
+   *
+   * Technically this method in many senses is equivalent to executing empty
+   * script:
+   * 1. It does nothing except for processing all pending debug messages.
+   * 2. It should be invoked with the same precautions and from the same context
+   * as V8 script would be invoked from, because:
+   *   a. with "evaluate" command it can do whatever normal script can do,
+   *   including all native calls;
+   *   b. no other thread should call V8 while this method is running
+   *   (v8::Locker may be used here).
+   *
+   * "Evaluate" debug command behavior currently is not specified in scope
+   * of this method.
+   */
+  static void ProcessDebugMessages();
+
+  /**
+   * Debugger is running in it's own context which is entered while debugger
+   * messages are being dispatched. This is an explicit getter for this
+   * debugger context. Note that the content of the debugger context is subject
+   * to change.
+   */
+  static Local<Context> GetDebugContext();
+};
+
+
+}  // namespace v8
+
+
+#undef EXPORT
+
+
+#endif  // V8_V8_DEBUG_H_

data/ext/v8/upstream/2.3.3/include/v8-profiler.h

@@ -0,0 +1,353 @@
+// Copyright 2010 the V8 project authors. All rights reserved.
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+//       notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+//       copyright notice, this list of conditions and the following
+//       disclaimer in the documentation and/or other materials provided
+//       with the distribution.
+//     * Neither the name of Google Inc. nor the names of its
+//       contributors may be used to endorse or promote products derived
+//       from this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#ifndef V8_V8_PROFILER_H_
+#define V8_V8_PROFILER_H_
+
+#include "v8.h"
+
+#ifdef _WIN32
+// Setup for Windows DLL export/import. See v8.h in this directory for
+// information on how to build/use V8 as a DLL.
+#if defined(BUILDING_V8_SHARED) && defined(USING_V8_SHARED)
+#error both BUILDING_V8_SHARED and USING_V8_SHARED are set - please check the\
+  build configuration to ensure that at most one of these is set
+#endif
+
+#ifdef BUILDING_V8_SHARED
+#define V8EXPORT __declspec(dllexport)
+#elif USING_V8_SHARED
+#define V8EXPORT __declspec(dllimport)
+#else
+#define V8EXPORT
+#endif
+
+#else  // _WIN32
+
+// Setup for Linux shared library export. See v8.h in this directory for
+// information on how to build/use V8 as shared library.
+#if defined(__GNUC__) && (__GNUC__ >= 4) && defined(V8_SHARED)
+#define V8EXPORT __attribute__ ((visibility("default")))
+#else  // defined(__GNUC__) && (__GNUC__ >= 4)
+#define V8EXPORT
+#endif  // defined(__GNUC__) && (__GNUC__ >= 4)
+
+#endif  // _WIN32
+
+
+/**
+ * Profiler support for the V8 JavaScript engine.
+ */
+namespace v8 {
+
+
+/**
+ * CpuProfileNode represents a node in a call graph.
+ */
+class V8EXPORT CpuProfileNode {
+ public:
+  /** Returns function name (empty string for anonymous functions.) */
+  Handle<String> GetFunctionName() const;
+
+  /** Returns resource name for script from where the function originates. */
+  Handle<String> GetScriptResourceName() const;
+
+  /**
+   * Returns the number, 1-based, of the line where the function originates.
+   * kNoLineNumberInfo if no line number information is available.
+   */
+  int GetLineNumber() const;
+
+  /**
+   * Returns total (self + children) execution time of the function,
+   * in milliseconds, estimated by samples count.
+   */
+  double GetTotalTime() const;
+
+  /**
+   * Returns self execution time of the function, in milliseconds,
+   * estimated by samples count.
+   */
+  double GetSelfTime() const;
+
+  /** Returns the count of samples where function exists. */
+  double GetTotalSamplesCount() const;
+
+  /** Returns the count of samples where function was currently executing. */
+  double GetSelfSamplesCount() const;
+
+  /** Returns function entry UID. */
+  unsigned GetCallUid() const;
+
+  /** Returns child nodes count of the node. */
+  int GetChildrenCount() const;
+
+  /** Retrieves a child node by index. */
+  const CpuProfileNode* GetChild(int index) const;
+
+  static const int kNoLineNumberInfo = Message::kNoLineNumberInfo;
+};
+
+
+/**
+ * CpuProfile contains a CPU profile in a form of two call trees:
+ *  - top-down (from main() down to functions that do all the work);
+ *  - bottom-up call graph (in backward direction).
+ */
+class V8EXPORT CpuProfile {
+ public:
+  /** Returns CPU profile UID (assigned by the profiler.) */
+  unsigned GetUid() const;
+
+  /** Returns CPU profile title. */
+  Handle<String> GetTitle() const;
+
+  /** Returns the root node of the bottom up call tree. */
+  const CpuProfileNode* GetBottomUpRoot() const;
+
+  /** Returns the root node of the top down call tree. */
+  const CpuProfileNode* GetTopDownRoot() const;
+};
+
+
+/**
+ * Interface for controlling CPU profiling.
+ */
+class V8EXPORT CpuProfiler {
+ public:
+  /**
+   * A note on security tokens usage. As scripts from different
+   * origins can run inside a single V8 instance, it is possible to
+   * have functions from different security contexts intermixed in a
+   * single CPU profile. To avoid exposing function names belonging to
+   * other contexts, filtering by security token is performed while
+   * obtaining profiling results.
+   */
+
+  /**
+   * Returns the number of profiles collected (doesn't include
+   * profiles that are being collected at the moment of call.)
+   */
+  static int GetProfilesCount();
+
+  /** Returns a profile by index. */
+  static const CpuProfile* GetProfile(
+      int index,
+      Handle<Value> security_token = Handle<Value>());
+
+  /** Returns a profile by uid. */
+  static const CpuProfile* FindProfile(
+      unsigned uid,
+      Handle<Value> security_token = Handle<Value>());
+
+  /**
+   * Starts collecting CPU profile. Title may be an empty string. It
+   * is allowed to have several profiles being collected at
+   * once. Attempts to start collecting several profiles with the same
+   * title are silently ignored. While collecting a profile, functions
+   * from all security contexts are included in it. The token-based
+   * filtering is only performed when querying for a profile.
+   */
+  static void StartProfiling(Handle<String> title);
+
+  /**
+   * Stops collecting CPU profile with a given title and returns it.
+   * If the title given is empty, finishes the last profile started.
+   */
+  static const CpuProfile* StopProfiling(
+      Handle<String> title,
+      Handle<Value> security_token = Handle<Value>());
+};
+
+
+class HeapGraphNode;
+
+
+/**
+ * HeapSnapshotEdge represents a directed connection between heap
+ * graph nodes: from retaners to retained nodes.
+ */
+class V8EXPORT HeapGraphEdge {
+ public:
+  enum Type {
+    CONTEXT_VARIABLE = 0,  // A variable from a function context.
+    ELEMENT = 1,           // An element of an array.
+    PROPERTY = 2,          // A named object property.
+    INTERNAL = 3           // A link that can't be accessed from JS,
+                           // thus, its name isn't a real property name.
+  };
+
+  /** Returns edge type (see HeapGraphEdge::Type). */
+  Type GetType() const;
+
+  /**
+   * Returns edge name. This can be a variable name, an element index, or
+   * a property name.
+   */
+  Handle<Value> GetName() const;
+
+  /** Returns origin node. */
+  const HeapGraphNode* GetFromNode() const;
+
+  /** Returns destination node. */
+  const HeapGraphNode* GetToNode() const;
+};
+
+
+class V8EXPORT HeapGraphPath {
+ public:
+  /** Returns the number of edges in the path. */
+  int GetEdgesCount() const;
+
+  /** Returns an edge from the path. */
+  const HeapGraphEdge* GetEdge(int index) const;
+
+  /** Returns origin node. */
+  const HeapGraphNode* GetFromNode() const;
+
+  /** Returns destination node. */
+  const HeapGraphNode* GetToNode() const;
+};
+
+
+/**
+ * HeapGraphNode represents a node in a heap graph.
+ */
+class V8EXPORT HeapGraphNode {
+ public:
+  enum Type {
+    INTERNAL = 0,   // Internal node, a virtual one, for housekeeping.
+    ARRAY = 1,      // An array of elements.
+    STRING = 2,     // A string.
+    OBJECT = 3,     // A JS object (except for arrays and strings).
+    CODE = 4,       // Compiled code.
+    CLOSURE = 5     // Function closure.
+  };
+
+  /** Returns node type (see HeapGraphNode::Type). */
+  Type GetType() const;
+
+  /**
+   * Returns node name. Depending on node's type this can be the name
+   * of the constructor (for objects), the name of the function (for
+   * closures), string value, or an empty string (for compiled code).
+   */
+  Handle<String> GetName() const;
+
+  /**
+   * Returns node id. For the same heap object, the id remains the same
+   * across all snapshots.
+   */
+  uint64_t GetId() const;
+
+  /** Returns node's own size, in bytes. */
+  int GetSelfSize() const;
+
+  /** Returns node's network (self + reachable nodes) size, in bytes. */
+  int GetTotalSize() const;
+
+  /**
+   * Returns node's private size, in bytes. That is, the size of memory
+   * that will be reclaimed having this node collected.
+   */
+  int GetPrivateSize() const;
+
+  /** Returns child nodes count of the node. */
+  int GetChildrenCount() const;
+
+  /** Retrieves a child by index. */
+  const HeapGraphEdge* GetChild(int index) const;
+
+  /** Returns retainer nodes count of the node. */
+  int GetRetainersCount() const;
+
+  /** Returns a retainer by index. */
+  const HeapGraphEdge* GetRetainer(int index) const;
+
+  /** Returns the number of simple retaining paths from the root to the node. */
+  int GetRetainingPathsCount() const;
+
+  /** Returns a retaining path by index. */
+  const HeapGraphPath* GetRetainingPath(int index) const;
+};
+
+
+class V8EXPORT HeapSnapshotsDiff {
+ public:
+  /** Returns the root node for added nodes. */
+  const HeapGraphNode* GetAdditionsRoot() const;
+
+  /** Returns the root node for deleted nodes. */
+  const HeapGraphNode* GetDeletionsRoot() const;
+};
+
+
+/**
+ * HeapSnapshots record the state of the JS heap at some moment.
+ */
+class V8EXPORT HeapSnapshot {
+ public:
+  /** Returns heap snapshot UID (assigned by the profiler.) */
+  unsigned GetUid() const;
+
+  /** Returns heap snapshot title. */
+  Handle<String> GetTitle() const;
+
+  /** Returns the root node of the heap graph. */
+  const HeapGraphNode* GetRoot() const;
+
+  /** Returns a diff between this snapshot and another one. */
+  const HeapSnapshotsDiff* CompareWith(const HeapSnapshot* snapshot) const;
+};
+
+
+/**
+ * Interface for controlling heap profiling.
+ */
+class V8EXPORT HeapProfiler {
+ public:
+  /** Returns the number of snapshots taken. */
+  static int GetSnapshotsCount();
+
+  /** Returns a snapshot by index. */
+  static const HeapSnapshot* GetSnapshot(int index);
+
+  /** Returns a profile by uid. */
+  static const HeapSnapshot* FindSnapshot(unsigned uid);
+
+  /** Takes a heap snapshot and returns it. Title may be an empty string. */
+  static const HeapSnapshot* TakeSnapshot(Handle<String> title);
+};
+
+
+}  // namespace v8
+
+
+#undef V8EXPORT
+
+
+#endif  // V8_V8_PROFILER_H_