stripe 13.4.0.pre.beta.1 → 13.4.0.pre.beta.2

data/lib/stripe/services/issuing/dispute_settlement_detail_service.rb

@@ -7,16 +7,12 @@ module Stripe
       class ListParams < Stripe::RequestParams
         # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
         attr_accessor :ending_before
-
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
         attr_accessor :limit
-
         # Select the Issuing dispute settlement details for the given settlement.
         attr_accessor :settlement
-
         # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
         attr_accessor :starting_after
 

data/lib/stripe/services/issuing/fraud_liability_debit_service.rb

@@ -8,13 +8,10 @@ module Stripe
         class Created < Stripe::RequestParams
           # Minimum value to filter by (exclusive)
           attr_accessor :gt
-
           # Minimum value to filter by (inclusive)
           attr_accessor :gte
-
           # Maximum value to filter by (exclusive)
           attr_accessor :lt
-
           # Maximum value to filter by (inclusive)
           attr_accessor :lte
 
@@ -27,16 +24,12 @@ module Stripe
         end
         # Only return Issuing Fraud Liability Debits that were created during the given date interval.
         attr_accessor :created
-
         # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
         attr_accessor :ending_before
-
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
         attr_accessor :limit
-
         # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
         attr_accessor :starting_after
 

data/lib/stripe/services/issuing/personalization_design_service.rb

@@ -8,7 +8,6 @@ module Stripe
         class Preferences < Stripe::RequestParams
           # Only return the personalization design that's set as the default. A connected account uses the Connect platform's default design if no personalization design is set as the default.
           attr_accessor :is_default
-
           # Only return the personalization design that is set as the Connect platform's default. This parameter is only applicable to connected accounts.
           attr_accessor :is_platform_default
 
@@ -19,22 +18,16 @@ module Stripe
         end
         # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
         attr_accessor :ending_before
-
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
         attr_accessor :limit
-
         # Only return personalization designs with the given lookup keys.
         attr_accessor :lookup_keys
-
         # Only return personalization designs with the given preferences.
         attr_accessor :preferences
-
         # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
         attr_accessor :starting_after
-
         # Only return personalization designs with the given status.
         attr_accessor :status
 
@@ -61,13 +54,10 @@ module Stripe
         class CarrierText < Stripe::RequestParams
           # The footer body text of the carrier letter.
           attr_accessor :footer_body
-
           # The footer title text of the carrier letter.
           attr_accessor :footer_title
-
           # The header body text of the carrier letter.
           attr_accessor :header_body
-
           # The header title text of the carrier letter.
           attr_accessor :header_title
 
@@ -89,28 +79,20 @@ module Stripe
         end
         # The file for the card logo, for use with physical bundles that support card logos. Must have a `purpose` value of `issuing_logo`.
         attr_accessor :card_logo
-
         # Hash containing carrier text, for use with physical bundles that support carrier text.
         attr_accessor :carrier_text
-
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # A lookup key used to retrieve personalization designs dynamically from a static string. This may be up to 200 characters.
         attr_accessor :lookup_key
-
         # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
         attr_accessor :metadata
-
         # Friendly display name.
         attr_accessor :name
-
         # The physical bundle object belonging to this personalization design.
         attr_accessor :physical_bundle
-
         # Information on whether this personalization design is used to create cards when one is not specified.
         attr_accessor :preferences
-
         # If set to true, will atomically remove the lookup key from the existing personalization design, and assign it to this personalization design.
         attr_accessor :transfer_lookup_key
 
@@ -150,13 +132,10 @@ module Stripe
         class CarrierText < Stripe::RequestParams
           # The footer body text of the carrier letter.
           attr_accessor :footer_body
-
           # The footer title text of the carrier letter.
           attr_accessor :footer_title
-
           # The header body text of the carrier letter.
           attr_accessor :header_body
-
           # The header title text of the carrier letter.
           attr_accessor :header_title
 
@@ -178,28 +157,20 @@ module Stripe
         end
         # The file for the card logo, for use with physical bundles that support card logos. Must have a `purpose` value of `issuing_logo`.
         attr_accessor :card_logo
-
         # Hash containing carrier text, for use with physical bundles that support carrier text.
         attr_accessor :carrier_text
-
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # A lookup key used to retrieve personalization designs dynamically from a static string. This may be up to 200 characters.
         attr_accessor :lookup_key
-
         # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
         attr_accessor :metadata
-
         # Friendly display name. Providing an empty string will set the field to null.
         attr_accessor :name
-
         # The physical bundle object belonging to this personalization design.
         attr_accessor :physical_bundle
-
         # Information on whether this personalization design is used to create cards when one is not specified.
         attr_accessor :preferences
-
         # If set to true, will atomically remove the lookup key from the existing personalization design, and assign it to this personalization design.
         attr_accessor :transfer_lookup_key
 

data/lib/stripe/services/issuing/physical_bundle_service.rb

@@ -7,19 +7,14 @@ module Stripe
       class ListParams < Stripe::RequestParams
         # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
         attr_accessor :ending_before
-
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
         attr_accessor :limit
-
         # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
         attr_accessor :starting_after
-
         # Only return physical bundles with the given status.
         attr_accessor :status
-
         # Only return physical bundles with the given type.
         attr_accessor :type
 

data/lib/stripe/services/issuing/token_service.rb

@@ -8,13 +8,10 @@ module Stripe
         class Created < Stripe::RequestParams
           # Minimum value to filter by (exclusive)
           attr_accessor :gt
-
           # Minimum value to filter by (inclusive)
           attr_accessor :gte
-
           # Maximum value to filter by (exclusive)
           attr_accessor :lt
-
           # Maximum value to filter by (inclusive)
           attr_accessor :lte
 
@@ -27,22 +24,16 @@ module Stripe
         end
         # The Issuing card identifier to list tokens for.
         attr_accessor :card
-
         # Only return Issuing tokens that were created during the given date interval.
         attr_accessor :created
-
         # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
         attr_accessor :ending_before
-
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
         attr_accessor :limit
-
         # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
         attr_accessor :starting_after
-
         # Select Issuing tokens with the given status.
         attr_accessor :status
 
@@ -77,7 +68,6 @@ module Stripe
       class UpdateParams < Stripe::RequestParams
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # Specifies which status the token should be updated to.
         attr_accessor :status
 

data/lib/stripe/services/issuing/transaction_service.rb

@@ -8,13 +8,10 @@ module Stripe
         class Created < Stripe::RequestParams
           # Minimum value to filter by (exclusive)
           attr_accessor :gt
-
           # Minimum value to filter by (inclusive)
           attr_accessor :gte
-
           # Maximum value to filter by (exclusive)
           attr_accessor :lt
-
           # Maximum value to filter by (inclusive)
           attr_accessor :lte
 
@@ -27,28 +24,20 @@ module Stripe
         end
         # Only return transactions that belong to the given card.
         attr_accessor :card
-
         # Only return transactions that belong to the given cardholder.
         attr_accessor :cardholder
-
         # Only return transactions that were created during the given date interval.
         attr_accessor :created
-
         # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
         attr_accessor :ending_before
-
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
         attr_accessor :limit
-
         # Only return transactions that are associated with the given settlement.
         attr_accessor :settlement
-
         # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
         attr_accessor :starting_after
-
         # Only return transactions that have the given type. One of `capture` or `refund`.
         attr_accessor :type
 
@@ -87,7 +76,6 @@ module Stripe
       class UpdateParams < Stripe::RequestParams
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
         attr_accessor :metadata
 

data/lib/stripe/services/margin_service.rb

@@ -6,16 +6,12 @@ module Stripe
     class ListParams < Stripe::RequestParams
       # Only return margins that are active or inactive. For example, pass `true` to only list active margins.
       attr_accessor :active
-
       # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
       attr_accessor :ending_before
-
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
-
       # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
       attr_accessor :limit
-
       # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
       attr_accessor :starting_after
 
@@ -31,16 +27,12 @@ module Stripe
     class CreateParams < Stripe::RequestParams
       # Whether the margin can be applied to invoices, invoice items, or invoice line items or not. Defaults to `true`.
       attr_accessor :active
-
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
-
       # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
       attr_accessor :metadata
-
       # Name of the margin, which is displayed to customers, such as on invoices.
       attr_accessor :name
-
       # Percent that will be taken off the subtotal before tax (after all other discounts and promotions) of any invoice to which the margin is applied.
       attr_accessor :percent_off
 
@@ -65,13 +57,10 @@ module Stripe
     class UpdateParams < Stripe::RequestParams
       # Whether the margin can be applied to invoices, invoice items, or invoice line items or not.
       attr_accessor :active
-
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
-
       # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
       attr_accessor :metadata
-
       # Name of the margin, which is displayed to customers, such as on invoices.
       attr_accessor :name
 

data/lib/stripe/services/order_line_item_service.rb

@@ -6,13 +6,10 @@ module Stripe
     class ListParams < Stripe::RequestParams
       # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
       attr_accessor :ending_before
-
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
-
       # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
       attr_accessor :limit
-
       # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
       attr_accessor :starting_after