stripe 13.4.0.pre.beta.1 → 13.4.0.pre.beta.2

data/rbi/stripe/resources/treasury/transaction.rbi

@@ -10,11 +10,9 @@ module Stripe
         # The change made to funds the user can spend right now.
         sig { returns(Integer) }
         attr_reader :cash
-
         # The change made to funds that are not spendable yet, but will become available at a later time.
         sig { returns(Integer) }
         attr_reader :inbound_pending
-
         # The change made to funds in the account, but not spendable because they are being held for pending outbound flows.
         sig { returns(Integer) }
         attr_reader :outbound_pending
@@ -23,17 +21,14 @@ module Stripe
         # You can reverse some [ReceivedCredits](https://stripe.com/docs/api#received_credits) depending on their network and source flow. Reversing a ReceivedCredit leads to the creation of a new object known as a CreditReversal.
         sig { returns(Stripe::Treasury::CreditReversal) }
         attr_reader :credit_reversal
-
         # You can reverse some [ReceivedDebits](https://stripe.com/docs/api#received_debits) depending on their network and source flow. Reversing a ReceivedDebit leads to the creation of a new object known as a DebitReversal.
         sig { returns(Stripe::Treasury::DebitReversal) }
         attr_reader :debit_reversal
-
         # Use [InboundTransfers](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/into/inbound-transfers) to add funds to your [FinancialAccount](https://stripe.com/docs/api#financial_accounts) via a PaymentMethod that is owned by you. The funds will be transferred via an ACH debit.
         #
         # Related guide: [Moving money with Treasury using InboundTransfer objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/into/inbound-transfers)
         sig { returns(Stripe::Treasury::InboundTransfer) }
         attr_reader :inbound_transfer
-
         # When an [issued card](https://stripe.com/docs/issuing) is used to make a purchase, an Issuing `Authorization`
         # object is created. [Authorizations](https://stripe.com/docs/issuing/purchases/authorizations) must be approved for the
         # purchase to be completed successfully.
@@ -41,7 +36,6 @@ module Stripe
         # Related guide: [Issued card authorizations](https://stripe.com/docs/issuing/purchases/authorizations)
         sig { returns(Stripe::Issuing::Authorization) }
         attr_reader :issuing_authorization
-
         # Use [OutboundPayments](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-payments) to send funds to another party's external bank account or [FinancialAccount](https://stripe.com/docs/api#financial_accounts). To send money to an account belonging to the same user, use an [OutboundTransfer](https://stripe.com/docs/api#outbound_transfers).
         #
         # Simulate OutboundPayment state changes with the `/v1/test_helpers/treasury/outbound_payments` endpoints. These methods can only be called on test mode objects.
@@ -49,7 +43,6 @@ module Stripe
         # Related guide: [Moving money with Treasury using OutboundPayment objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-payments)
         sig { returns(Stripe::Treasury::OutboundPayment) }
         attr_reader :outbound_payment
-
         # Use [OutboundTransfers](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-transfers) to transfer funds from a [FinancialAccount](https://stripe.com/docs/api#financial_accounts) to a PaymentMethod belonging to the same entity. To send funds to a different party, use [OutboundPayments](https://stripe.com/docs/api#outbound_payments) instead. You can send funds over ACH rails or through a domestic wire transfer to a user's own external bank account.
         #
         # Simulate OutboundTransfer state changes with the `/v1/test_helpers/treasury/outbound_transfers` endpoints. These methods can only be called on test mode objects.
@@ -57,15 +50,12 @@ module Stripe
         # Related guide: [Moving money with Treasury using OutboundTransfer objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-transfers)
         sig { returns(Stripe::Treasury::OutboundTransfer) }
         attr_reader :outbound_transfer
-
         # ReceivedCredits represent funds sent to a [FinancialAccount](https://stripe.com/docs/api#financial_accounts) (for example, via ACH or wire). These money movements are not initiated from the FinancialAccount.
         sig { returns(Stripe::Treasury::ReceivedCredit) }
         attr_reader :received_credit
-
         # ReceivedDebits represent funds pulled from a [FinancialAccount](https://stripe.com/docs/api#financial_accounts). These are not initiated from the FinancialAccount.
         sig { returns(Stripe::Treasury::ReceivedDebit) }
         attr_reader :received_debit
-
         # Type of the flow that created the Transaction. Set to the same value as `flow_type`.
         sig { returns(String) }
         attr_reader :type
@@ -74,7 +64,6 @@ module Stripe
         # Timestamp describing when the Transaction changed status to `posted`.
         sig { returns(T.nilable(Integer)) }
         attr_reader :posted_at
-
         # Timestamp describing when the Transaction changed status to `void`.
         sig { returns(T.nilable(Integer)) }
         attr_reader :void_at
@@ -82,81 +71,62 @@ module Stripe
       # Amount (in cents) transferred.
       sig { returns(Integer) }
       attr_reader :amount
-
       # Change to a FinancialAccount's balance
       sig { returns(BalanceImpact) }
       attr_reader :balance_impact
-
       # Time at which the object was created. Measured in seconds since the Unix epoch.
       sig { returns(Integer) }
       attr_reader :created
-
       # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
       sig { returns(String) }
       attr_reader :currency
-
       # An arbitrary string attached to the object. Often useful for displaying to users.
       sig { returns(String) }
       attr_reader :description
-
       # A list of TransactionEntries that are part of this Transaction. This cannot be expanded in any list endpoints.
       sig { returns(T.nilable(Stripe::ListObject)) }
       attr_reader :entries
-
       # The FinancialAccount associated with this object.
       sig { returns(String) }
       attr_reader :financial_account
-
       # ID of the flow that created the Transaction.
       sig { returns(T.nilable(String)) }
       attr_reader :flow
-
       # Details of the flow that created the Transaction.
       sig { returns(T.nilable(FlowDetails)) }
       attr_reader :flow_details
-
       # Type of the flow that created the Transaction.
       sig { returns(String) }
       attr_reader :flow_type
-
       # Unique identifier for the object.
       sig { returns(String) }
       attr_reader :id
-
       # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
       sig { returns(T::Boolean) }
       attr_reader :livemode
-
       # String representing the object's type. Objects of the same type share the same value.
       sig { returns(String) }
       attr_reader :object
-
       # Status of the Transaction.
       sig { returns(String) }
       attr_reader :status
-
       # Attribute for field status_transitions
       sig { returns(StatusTransitions) }
       attr_reader :status_transitions
-
       class ListParams < Stripe::RequestParams
         class Created < Stripe::RequestParams
           # Minimum value to filter by (exclusive)
           sig { returns(Integer) }
           attr_accessor :gt
-
           # Minimum value to filter by (inclusive)
           sig { returns(Integer) }
           attr_accessor :gte
-
           # Maximum value to filter by (exclusive)
           sig { returns(Integer) }
           attr_accessor :lt
-
           # Maximum value to filter by (inclusive)
           sig { returns(Integer) }
           attr_accessor :lte
-
           sig { params(gt: Integer, gte: Integer, lt: Integer, lte: Integer).void }
           def initialize(gt: nil, gte: nil, lt: nil, lte: nil); end
         end
@@ -165,19 +135,15 @@ module Stripe
             # Minimum value to filter by (exclusive)
             sig { returns(Integer) }
             attr_accessor :gt
-
             # Minimum value to filter by (inclusive)
             sig { returns(Integer) }
             attr_accessor :gte
-
             # Maximum value to filter by (exclusive)
             sig { returns(Integer) }
             attr_accessor :lt
-
             # Maximum value to filter by (inclusive)
             sig { returns(Integer) }
             attr_accessor :lte
-
             sig { params(gt: Integer, gte: Integer, lt: Integer, lte: Integer).void }
             def initialize(gt: nil, gte: nil, lt: nil, lte: nil); end
           end
@@ -186,7 +152,6 @@ module Stripe
             returns(T.any(::Stripe::Treasury::Transaction::ListParams::StatusTransitions::PostedAt, Integer))
            }
           attr_accessor :posted_at
-
           sig {
             params(posted_at: T.any(::Stripe::Treasury::Transaction::ListParams::StatusTransitions::PostedAt, Integer)).void
            }
@@ -195,39 +160,30 @@ module Stripe
         # Only return Transactions that were created during the given date interval.
         sig { returns(T.any(::Stripe::Treasury::Transaction::ListParams::Created, Integer)) }
         attr_accessor :created
-
         # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
         sig { returns(String) }
         attr_accessor :ending_before
-
         # Specifies which fields in the response should be expanded.
         sig { returns(T::Array[String]) }
         attr_accessor :expand
-
         # Returns objects associated with this FinancialAccount.
         sig { returns(String) }
         attr_accessor :financial_account
-
         # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
         sig { returns(Integer) }
         attr_accessor :limit
-
         # The results are in reverse chronological order by `created` or `posted_at`. The default is `created`.
         sig { returns(String) }
         attr_accessor :order_by
-
         # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
         sig { returns(String) }
         attr_accessor :starting_after
-
         # Only return Transactions that have the given status: `open`, `posted`, or `void`.
         sig { returns(String) }
         attr_accessor :status
-
         # A filter for the `status_transitions.posted_at` timestamp. When using this filter, `status=posted` and `order_by=posted_at` must also be specified.
         sig { returns(::Stripe::Treasury::Transaction::ListParams::StatusTransitions) }
         attr_accessor :status_transitions
-
         sig {
           params(created: T.any(::Stripe::Treasury::Transaction::ListParams::Created, Integer), ending_before: String, expand: T::Array[String], financial_account: String, limit: Integer, order_by: String, starting_after: String, status: String, status_transitions: ::Stripe::Treasury::Transaction::ListParams::StatusTransitions).void
          }
@@ -247,7 +203,6 @@ module Stripe
         # Specifies which fields in the response should be expanded.
         sig { returns(T::Array[String]) }
         attr_accessor :expand
-
         sig { params(expand: T::Array[String]).void }
         def initialize(expand: nil); end
       end

data/rbi/stripe/resources/treasury/transaction_entry.rbi

@@ -10,11 +10,9 @@ module Stripe
         # The change made to funds the user can spend right now.
         sig { returns(Integer) }
         attr_reader :cash
-
         # The change made to funds that are not spendable yet, but will become available at a later time.
         sig { returns(Integer) }
         attr_reader :inbound_pending
-
         # The change made to funds in the account, but not spendable because they are being held for pending outbound flows.
         sig { returns(Integer) }
         attr_reader :outbound_pending
@@ -23,17 +21,14 @@ module Stripe
         # You can reverse some [ReceivedCredits](https://stripe.com/docs/api#received_credits) depending on their network and source flow. Reversing a ReceivedCredit leads to the creation of a new object known as a CreditReversal.
         sig { returns(Stripe::Treasury::CreditReversal) }
         attr_reader :credit_reversal
-
         # You can reverse some [ReceivedDebits](https://stripe.com/docs/api#received_debits) depending on their network and source flow. Reversing a ReceivedDebit leads to the creation of a new object known as a DebitReversal.
         sig { returns(Stripe::Treasury::DebitReversal) }
         attr_reader :debit_reversal
-
         # Use [InboundTransfers](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/into/inbound-transfers) to add funds to your [FinancialAccount](https://stripe.com/docs/api#financial_accounts) via a PaymentMethod that is owned by you. The funds will be transferred via an ACH debit.
         #
         # Related guide: [Moving money with Treasury using InboundTransfer objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/into/inbound-transfers)
         sig { returns(Stripe::Treasury::InboundTransfer) }
         attr_reader :inbound_transfer
-
         # When an [issued card](https://stripe.com/docs/issuing) is used to make a purchase, an Issuing `Authorization`
         # object is created. [Authorizations](https://stripe.com/docs/issuing/purchases/authorizations) must be approved for the
         # purchase to be completed successfully.
@@ -41,7 +36,6 @@ module Stripe
         # Related guide: [Issued card authorizations](https://stripe.com/docs/issuing/purchases/authorizations)
         sig { returns(Stripe::Issuing::Authorization) }
         attr_reader :issuing_authorization
-
         # Use [OutboundPayments](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-payments) to send funds to another party's external bank account or [FinancialAccount](https://stripe.com/docs/api#financial_accounts). To send money to an account belonging to the same user, use an [OutboundTransfer](https://stripe.com/docs/api#outbound_transfers).
         #
         # Simulate OutboundPayment state changes with the `/v1/test_helpers/treasury/outbound_payments` endpoints. These methods can only be called on test mode objects.
@@ -49,7 +43,6 @@ module Stripe
         # Related guide: [Moving money with Treasury using OutboundPayment objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-payments)
         sig { returns(Stripe::Treasury::OutboundPayment) }
         attr_reader :outbound_payment
-
         # Use [OutboundTransfers](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-transfers) to transfer funds from a [FinancialAccount](https://stripe.com/docs/api#financial_accounts) to a PaymentMethod belonging to the same entity. To send funds to a different party, use [OutboundPayments](https://stripe.com/docs/api#outbound_payments) instead. You can send funds over ACH rails or through a domestic wire transfer to a user's own external bank account.
         #
         # Simulate OutboundTransfer state changes with the `/v1/test_helpers/treasury/outbound_transfers` endpoints. These methods can only be called on test mode objects.
@@ -57,15 +50,12 @@ module Stripe
         # Related guide: [Moving money with Treasury using OutboundTransfer objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-transfers)
         sig { returns(Stripe::Treasury::OutboundTransfer) }
         attr_reader :outbound_transfer
-
         # ReceivedCredits represent funds sent to a [FinancialAccount](https://stripe.com/docs/api#financial_accounts) (for example, via ACH or wire). These money movements are not initiated from the FinancialAccount.
         sig { returns(Stripe::Treasury::ReceivedCredit) }
         attr_reader :received_credit
-
         # ReceivedDebits represent funds pulled from a [FinancialAccount](https://stripe.com/docs/api#financial_accounts). These are not initiated from the FinancialAccount.
         sig { returns(Stripe::Treasury::ReceivedDebit) }
         attr_reader :received_debit
-
         # Type of the flow that created the Transaction. Set to the same value as `flow_type`.
         sig { returns(String) }
         attr_reader :type
@@ -73,73 +63,56 @@ module Stripe
       # Change to a FinancialAccount's balance
       sig { returns(BalanceImpact) }
       attr_reader :balance_impact
-
       # Time at which the object was created. Measured in seconds since the Unix epoch.
       sig { returns(Integer) }
       attr_reader :created
-
       # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
       sig { returns(String) }
       attr_reader :currency
-
       # When the TransactionEntry will impact the FinancialAccount's balance.
       sig { returns(Integer) }
       attr_reader :effective_at
-
       # The FinancialAccount associated with this object.
       sig { returns(String) }
       attr_reader :financial_account
-
       # Token of the flow associated with the TransactionEntry.
       sig { returns(T.nilable(String)) }
       attr_reader :flow
-
       # Details of the flow associated with the TransactionEntry.
       sig { returns(T.nilable(FlowDetails)) }
       attr_reader :flow_details
-
       # Type of the flow associated with the TransactionEntry.
       sig { returns(String) }
       attr_reader :flow_type
-
       # Unique identifier for the object.
       sig { returns(String) }
       attr_reader :id
-
       # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
       sig { returns(T::Boolean) }
       attr_reader :livemode
-
       # String representing the object's type. Objects of the same type share the same value.
       sig { returns(String) }
       attr_reader :object
-
       # The Transaction associated with this object.
       sig { returns(T.any(String, Stripe::Treasury::Transaction)) }
       attr_reader :transaction
-
       # The specific money movement that generated the TransactionEntry.
       sig { returns(String) }
       attr_reader :type
-
       class ListParams < Stripe::RequestParams
         class Created < Stripe::RequestParams
           # Minimum value to filter by (exclusive)
           sig { returns(Integer) }
           attr_accessor :gt
-
           # Minimum value to filter by (inclusive)
           sig { returns(Integer) }
           attr_accessor :gte
-
           # Maximum value to filter by (exclusive)
           sig { returns(Integer) }
           attr_accessor :lt
-
           # Maximum value to filter by (inclusive)
           sig { returns(Integer) }
           attr_accessor :lte
-
           sig { params(gt: Integer, gte: Integer, lt: Integer, lte: Integer).void }
           def initialize(gt: nil, gte: nil, lt: nil, lte: nil); end
         end
@@ -147,60 +120,47 @@ module Stripe
           # Minimum value to filter by (exclusive)
           sig { returns(Integer) }
           attr_accessor :gt
-
           # Minimum value to filter by (inclusive)
           sig { returns(Integer) }
           attr_accessor :gte
-
           # Maximum value to filter by (exclusive)
           sig { returns(Integer) }
           attr_accessor :lt
-
           # Maximum value to filter by (inclusive)
           sig { returns(Integer) }
           attr_accessor :lte
-
           sig { params(gt: Integer, gte: Integer, lt: Integer, lte: Integer).void }
           def initialize(gt: nil, gte: nil, lt: nil, lte: nil); end
         end
         # Only return TransactionEntries that were created during the given date interval.
         sig { returns(T.any(::Stripe::Treasury::TransactionEntry::ListParams::Created, Integer)) }
         attr_accessor :created
-
         # Attribute for param field effective_at
         sig {
           returns(T.any(::Stripe::Treasury::TransactionEntry::ListParams::EffectiveAt, Integer))
          }
         attr_accessor :effective_at
-
         # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
         sig { returns(String) }
         attr_accessor :ending_before
-
         # Specifies which fields in the response should be expanded.
         sig { returns(T::Array[String]) }
         attr_accessor :expand
-
         # Returns objects associated with this FinancialAccount.
         sig { returns(String) }
         attr_accessor :financial_account
-
         # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
         sig { returns(Integer) }
         attr_accessor :limit
-
         # The results are in reverse chronological order by `created` or `effective_at`. The default is `created`.
         sig { returns(String) }
         attr_accessor :order_by
-
         # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
         sig { returns(String) }
         attr_accessor :starting_after
-
         # Only return TransactionEntries associated with this Transaction.
         sig { returns(String) }
         attr_accessor :transaction
-
         sig {
           params(created: T.any(::Stripe::Treasury::TransactionEntry::ListParams::Created, Integer), effective_at: T.any(::Stripe::Treasury::TransactionEntry::ListParams::EffectiveAt, Integer), ending_before: String, expand: T::Array[String], financial_account: String, limit: Integer, order_by: String, starting_after: String, transaction: String).void
          }
@@ -220,7 +180,6 @@ module Stripe
         # Specifies which fields in the response should be expanded.
         sig { returns(T::Array[String]) }
         attr_accessor :expand
-
         sig { params(expand: T::Array[String]).void }
         def initialize(expand: nil); end
       end

data/rbi/stripe/resources/usage_record.rbi

@@ -13,23 +13,18 @@ module Stripe
     # Unique identifier for the object.
     sig { returns(String) }
     attr_reader :id
-
     # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
     sig { returns(T::Boolean) }
     attr_reader :livemode
-
     # String representing the object's type. Objects of the same type share the same value.
     sig { returns(String) }
     attr_reader :object
-
     # The usage quantity for the specified date.
     sig { returns(Integer) }
     attr_reader :quantity
-
     # The ID of the subscription item this usage record contains data for.
     sig { returns(String) }
     attr_reader :subscription_item
-
     # The timestamp when this usage occurred.
     sig { returns(Integer) }
     attr_reader :timestamp

data/rbi/stripe/resources/usage_record_summary.rbi

@@ -9,7 +9,6 @@ module Stripe
       # The end date of this usage period. All usage up to and including this point in time is included.
       sig { returns(T.nilable(Integer)) }
       attr_reader :end
-
       # The start date of this usage period. All usage after this point in time is included.
       sig { returns(T.nilable(Integer)) }
       attr_reader :start
@@ -17,27 +16,21 @@ module Stripe
     # Unique identifier for the object.
     sig { returns(String) }
     attr_reader :id
-
     # The invoice in which this usage period has been billed for.
     sig { returns(T.nilable(String)) }
     attr_reader :invoice
-
     # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
     sig { returns(T::Boolean) }
     attr_reader :livemode
-
     # String representing the object's type. Objects of the same type share the same value.
     sig { returns(String) }
     attr_reader :object
-
     # Attribute for field period
     sig { returns(Period) }
     attr_reader :period
-
     # The ID of the subscription item this summary is describing.
     sig { returns(String) }
     attr_reader :subscription_item
-
     # The total usage within this usage period.
     sig { returns(Integer) }
     attr_reader :total_usage

data/rbi/stripe/resources/v2/billing/meter_event.rbi

@@ -10,29 +10,23 @@ module Stripe
         # The creation time of this meter event.
         sig { returns(String) }
         attr_reader :created
-
         # The name of the meter event. Corresponds with the `event_name` field on a meter.
         sig { returns(String) }
         attr_reader :event_name
-
         # A unique identifier for the event. If not provided, one will be generated. We recommend using a globally unique identifier for this. We’ll enforce uniqueness within a rolling 24 hour period.
         sig { returns(String) }
         attr_reader :identifier
-
         # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
         sig { returns(T::Boolean) }
         attr_reader :livemode
-
         # String representing the object's type. Objects of the same type share the same value of the object field.
         sig { returns(String) }
         attr_reader :object
-
         # The payload of the event. This must contain the fields corresponding to a meter’s
         # `customer_mapping.event_payload_key` (default is `stripe_customer_id`) and
         # `value_settings.event_payload_key` (default is `value`). Read more about the payload.
         sig { returns(T::Hash[String, String]) }
         attr_reader :payload
-
         # The time of the event. Must be within the past 35 calendar days or up to
         # 5 minutes in the future. Defaults to current timestamp if not specified.
         sig { returns(String) }

data/rbi/stripe/resources/v2/billing/meter_event_adjustment.rbi

@@ -14,31 +14,24 @@ module Stripe
         # Specifies which event to cancel.
         sig { returns(Cancel) }
         attr_reader :cancel
-
         # The time the adjustment was created.
         sig { returns(String) }
         attr_reader :created
-
         # The name of the meter event. Corresponds with the `event_name` field on a meter.
         sig { returns(String) }
         attr_reader :event_name
-
         # The unique id of this meter event adjustment.
         sig { returns(String) }
         attr_reader :id
-
         # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
         sig { returns(T::Boolean) }
         attr_reader :livemode
-
         # String representing the object's type. Objects of the same type share the same value of the object field.
         sig { returns(String) }
         attr_reader :object
-
         # Open Enum. The meter event adjustment’s status.
         sig { returns(String) }
         attr_reader :status
-
         # Open Enum. Specifies whether to cancel a single event or a range of events for a time period. Time period cancellation is not supported yet.
         sig { returns(String) }
         attr_reader :type

data/rbi/stripe/resources/v2/billing/meter_event_session.rbi

@@ -10,23 +10,18 @@ module Stripe
         # high-throughput meter event API.
         sig { returns(String) }
         attr_reader :authentication_token
-
         # The creation time of this session.
         sig { returns(String) }
         attr_reader :created
-
         # The time at which this session will expire.
         sig { returns(String) }
         attr_reader :expires_at
-
         # The unique id of this auth session.
         sig { returns(String) }
         attr_reader :id
-
         # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
         sig { returns(T::Boolean) }
         attr_reader :livemode
-
         # String representing the object's type. Objects of the same type share the same value of the object field.
         sig { returns(String) }
         attr_reader :object

data/rbi/stripe/resources/v2/event.rbi

@@ -10,7 +10,6 @@ module Stripe
           # ID of the API request that caused the event.
           sig { returns(String) }
           attr_reader :id
-
           # The idempotency key transmitted during the request.
           sig { returns(String) }
           attr_reader :idempotency_key
@@ -18,7 +17,6 @@ module Stripe
         # Event reason type.
         sig { returns(String) }
         attr_reader :type
-
         # Information on the API request that instigated the event.
         sig { returns(T.nilable(Request)) }
         attr_reader :request
@@ -26,27 +24,21 @@ module Stripe
       # Authentication context needed to fetch the event or related object.
       sig { returns(T.nilable(String)) }
       attr_reader :context
-
       # Time at which the object was created.
       sig { returns(String) }
       attr_reader :created
-
       # Unique identifier for the event.
       sig { returns(String) }
       attr_reader :id
-
       # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
       sig { returns(T::Boolean) }
       attr_reader :livemode
-
       # String representing the object's type. Objects of the same type share the same value of the object field.
       sig { returns(String) }
       attr_reader :object
-
       # Reason for the event.
       sig { returns(T.nilable(Reason)) }
       attr_reader :reason
-
       # The type of the event.
       sig { returns(String) }
       attr_reader :type