stripe 13.4.0.pre.beta.1 → 13.4.0.pre.beta.2

data/lib/stripe/resources/price.rb

@@ -23,10 +23,8 @@ module Stripe
       class CustomUnitAmount < Stripe::StripeObject
         # The maximum unit amount the customer can specify for this item.
         attr_reader :maximum
-
         # The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
         attr_reader :minimum
-
         # The starting unit amount which can be updated by the customer.
         attr_reader :preset
       end
@@ -34,31 +32,23 @@ module Stripe
       class Tier < Stripe::StripeObject
         # Price for the entire tier.
         attr_reader :flat_amount
-
         # Same as `flat_amount`, but contains a decimal value with at most 12 decimal places.
         attr_reader :flat_amount_decimal
-
         # Per unit price for units relevant to the tier.
         attr_reader :unit_amount
-
         # Same as `unit_amount`, but contains a decimal value with at most 12 decimal places.
         attr_reader :unit_amount_decimal
-
         # Up to and including to this quantity will be contained in the tier.
         attr_reader :up_to
       end
       # When set, provides configuration for the amount to be adjusted by the customer during Checkout Sessions and Payment Links.
       attr_reader :custom_unit_amount
-
       # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
       attr_reader :tax_behavior
-
       # Each element represents a pricing tier. This parameter requires `billing_scheme` to be set to `tiered`. See also the documentation for `billing_scheme`.
       attr_reader :tiers
-
       # The unit amount in cents (or local equivalent) to be charged, represented as a whole integer if possible. Only set if `billing_scheme=per_unit`.
       attr_reader :unit_amount
-
       # The unit amount in cents (or local equivalent) to be charged, represented as a decimal string with at most 12 decimal places. Only set if `billing_scheme=per_unit`.
       attr_reader :unit_amount_decimal
     end
@@ -66,10 +56,8 @@ module Stripe
     class CustomUnitAmount < Stripe::StripeObject
       # The maximum unit amount the customer can specify for this item.
       attr_reader :maximum
-
       # The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
       attr_reader :minimum
-
       # The starting unit amount which can be updated by the customer.
       attr_reader :preset
     end
@@ -77,10 +65,8 @@ module Stripe
     class MigrateTo < Stripe::StripeObject
       # The behavior controlling at what point in the subscription lifecycle to migrate the price
       attr_reader :behavior
-
       # The unix timestamp after at which subscriptions will start to migrate to the new price.
       attr_reader :effective_after
-
       # The id of the price being migrated to
       attr_reader :price
     end
@@ -88,19 +74,14 @@ module Stripe
     class Recurring < Stripe::StripeObject
       # Specifies a usage aggregation strategy for prices of `usage_type=metered`. Defaults to `sum`.
       attr_reader :aggregate_usage
-
       # The frequency at which a subscription is billed. One of `day`, `week`, `month` or `year`.
       attr_reader :interval
-
       # The number of intervals (specified in the `interval` attribute) between subscription billings. For example, `interval=month` and `interval_count=3` bills every 3 months.
       attr_reader :interval_count
-
       # The meter tracking the usage of a metered price
       attr_reader :meter
-
       # Default number of trial days when subscribing a customer to this price using [`trial_from_plan=true`](https://stripe.com/docs/api#create_subscription-trial_from_plan).
       attr_reader :trial_period_days
-
       # Configures how the quantity per period should be determined. Can be either `metered` or `licensed`. `licensed` automatically bills the `quantity` set when adding it to a subscription. `metered` aggregates the total usage based on usage records. Defaults to `licensed`.
       attr_reader :usage_type
     end
@@ -108,16 +89,12 @@ module Stripe
     class Tier < Stripe::StripeObject
       # Price for the entire tier.
       attr_reader :flat_amount
-
       # Same as `flat_amount`, but contains a decimal value with at most 12 decimal places.
       attr_reader :flat_amount_decimal
-
       # Per unit price for units relevant to the tier.
       attr_reader :unit_amount
-
       # Same as `unit_amount`, but contains a decimal value with at most 12 decimal places.
       attr_reader :unit_amount_decimal
-
       # Up to and including to this quantity will be contained in the tier.
       attr_reader :up_to
     end
@@ -125,7 +102,6 @@ module Stripe
     class TransformQuantity < Stripe::StripeObject
       # Divide usage by this number.
       attr_reader :divide_by
-
       # After division, either round the result `up` or `down`.
       attr_reader :round
     end
@@ -134,13 +110,10 @@ module Stripe
       class Created < Stripe::RequestParams
         # Minimum value to filter by (exclusive)
         attr_accessor :gt
-
         # Minimum value to filter by (inclusive)
         attr_accessor :gte
-
         # Maximum value to filter by (exclusive)
         attr_accessor :lt
-
         # Maximum value to filter by (inclusive)
         attr_accessor :lte
 
@@ -155,10 +128,8 @@ module Stripe
       class Recurring < Stripe::RequestParams
         # Filter by billing frequency. Either `day`, `week`, `month` or `year`.
         attr_accessor :interval
-
         # Filter by the price's meter.
         attr_accessor :meter
-
         # Filter by the usage type for this price. Can be either `metered` or `licensed`.
         attr_accessor :usage_type
 
@@ -170,34 +141,24 @@ module Stripe
       end
       # Only return prices that are active or inactive (e.g., pass `false` to list all inactive prices).
       attr_accessor :active
-
       # A filter on the list, based on the object `created` field. The value can be a string with an integer Unix timestamp, or it can be a dictionary with a number of different query options.
       attr_accessor :created
-
       # Only return prices for the given currency.
       attr_accessor :currency
-
       # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
       attr_accessor :ending_before
-
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
-
       # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
       attr_accessor :limit
-
       # Only return the price with these lookup_keys, if any exist. You can specify up to 10 lookup_keys.
       attr_accessor :lookup_keys
-
       # Only return prices for the given product.
       attr_accessor :product
-
       # Only return prices with these recurring fields.
       attr_accessor :recurring
-
       # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
       attr_accessor :starting_after
-
       # Only return prices of type `recurring` or `one_time`.
       attr_accessor :type
 
@@ -233,13 +194,10 @@ module Stripe
         class CustomUnitAmount < Stripe::RequestParams
           # Pass in `true` to enable `custom_unit_amount`, otherwise omit `custom_unit_amount`.
           attr_accessor :enabled
-
           # The maximum unit amount the customer can specify for this item.
           attr_accessor :maximum
-
           # The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
           attr_accessor :minimum
-
           # The starting unit amount which can be updated by the customer.
           attr_accessor :preset
 
@@ -254,16 +212,12 @@ module Stripe
         class Tier < Stripe::RequestParams
           # The flat billing amount for an entire tier, regardless of the number of units in the tier.
           attr_accessor :flat_amount
-
           # Same as `flat_amount`, but accepts a decimal value representing an integer in the minor units of the currency. Only one of `flat_amount` and `flat_amount_decimal` can be set.
           attr_accessor :flat_amount_decimal
-
           # The per unit billing amount for each individual unit for which this tier applies.
           attr_accessor :unit_amount
-
           # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
           attr_accessor :unit_amount_decimal
-
           # Specifies the upper bound of this tier. The lower bound of a tier is the upper bound of the previous tier adding one. Use `inf` to define a fallback tier.
           attr_accessor :up_to
 
@@ -283,16 +237,12 @@ module Stripe
         end
         # When set, provides configuration for the amount to be adjusted by the customer during Checkout Sessions and Payment Links.
         attr_accessor :custom_unit_amount
-
         # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
         attr_accessor :tax_behavior
-
         # Each element represents a pricing tier. This parameter requires `billing_scheme` to be set to `tiered`. See also the documentation for `billing_scheme`.
         attr_accessor :tiers
-
         # A positive integer in cents (or local equivalent) (or 0 for a free price) representing how much to charge.
         attr_accessor :unit_amount
-
         # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
         attr_accessor :unit_amount_decimal
 
@@ -314,13 +264,10 @@ module Stripe
       class CustomUnitAmount < Stripe::RequestParams
         # Pass in `true` to enable `custom_unit_amount`, otherwise omit `custom_unit_amount`.
         attr_accessor :enabled
-
         # The maximum unit amount the customer can specify for this item.
         attr_accessor :maximum
-
         # The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
         attr_accessor :minimum
-
         # The starting unit amount which can be updated by the customer.
         attr_accessor :preset
 
@@ -335,24 +282,18 @@ module Stripe
       class ProductData < Stripe::RequestParams
         # Whether the product is currently available for purchase. Defaults to `true`.
         attr_accessor :active
-
         # The identifier for the product. Must be unique. If not provided, an identifier will be randomly generated.
         attr_accessor :id
-
         # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
         attr_accessor :metadata
-
         # The product's name, meant to be displayable to the customer.
         attr_accessor :name
-
         # An arbitrary string to be displayed on your customer's credit card or bank statement. While most banks display this information consistently, some may display it incorrectly or not at all.
         #
         # This may be up to 22 characters. The statement description may not include `<`, `>`, `\`, `"`, `'` characters, and will appear on your customer's statement in capital letters. Non-ASCII characters are automatically stripped.
         attr_accessor :statement_descriptor
-
         # A [tax code](https://stripe.com/docs/tax/tax-categories) ID.
         attr_accessor :tax_code
-
         # A label that represents units of this product. When set, this will be included in customers' receipts, invoices, Checkout, and the customer portal.
         attr_accessor :unit_label
 
@@ -378,19 +319,14 @@ module Stripe
       class Recurring < Stripe::RequestParams
         # Specifies a usage aggregation strategy for prices of `usage_type=metered`. Defaults to `sum`.
         attr_accessor :aggregate_usage
-
         # Specifies billing frequency. Either `day`, `week`, `month` or `year`.
         attr_accessor :interval
-
         # The number of intervals between subscription billings. For example, `interval=month` and `interval_count=3` bills every 3 months. Maximum of three years interval allowed (3 years, 36 months, or 156 weeks).
         attr_accessor :interval_count
-
         # The meter tracking the usage of a metered price
         attr_accessor :meter
-
         # Default number of trial days when subscribing a customer to this price using [`trial_from_plan=true`](https://stripe.com/docs/api#create_subscription-trial_from_plan).
         attr_accessor :trial_period_days
-
         # Configures how the quantity per period should be determined. Can be either `metered` or `licensed`. `licensed` automatically bills the `quantity` set when adding it to a subscription. `metered` aggregates the total usage based on usage records. Defaults to `licensed`.
         attr_accessor :usage_type
 
@@ -414,16 +350,12 @@ module Stripe
       class Tier < Stripe::RequestParams
         # The flat billing amount for an entire tier, regardless of the number of units in the tier.
         attr_accessor :flat_amount
-
         # Same as `flat_amount`, but accepts a decimal value representing an integer in the minor units of the currency. Only one of `flat_amount` and `flat_amount_decimal` can be set.
         attr_accessor :flat_amount_decimal
-
         # The per unit billing amount for each individual unit for which this tier applies.
         attr_accessor :unit_amount
-
         # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
         attr_accessor :unit_amount_decimal
-
         # Specifies the upper bound of this tier. The lower bound of a tier is the upper bound of the previous tier adding one. Use `inf` to define a fallback tier.
         attr_accessor :up_to
 
@@ -445,7 +377,6 @@ module Stripe
       class TransformQuantity < Stripe::RequestParams
         # Divide usage by this number.
         attr_accessor :divide_by
-
         # After division, either round the result `up` or `down`.
         attr_accessor :round
 
@@ -456,58 +387,40 @@ module Stripe
       end
       # Whether the price can be used for new purchases. Defaults to `true`.
       attr_accessor :active
-
       # Describes how to compute the price per period. Either `per_unit` or `tiered`. `per_unit` indicates that the fixed amount (specified in `unit_amount` or `unit_amount_decimal`) will be charged per unit in `quantity` (for prices with `usage_type=licensed`), or per unit of total usage (for prices with `usage_type=metered`). `tiered` indicates that the unit pricing will be computed using a tiering strategy as defined using the `tiers` and `tiers_mode` attributes.
       attr_accessor :billing_scheme
-
       # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
       attr_accessor :currency
-
       # Prices defined in each available currency option. Each key must be a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html) and a [supported currency](https://stripe.com/docs/currencies).
       attr_accessor :currency_options
-
       # When set, provides configuration for the amount to be adjusted by the customer during Checkout Sessions and Payment Links.
       attr_accessor :custom_unit_amount
-
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
-
       # A lookup key used to retrieve prices dynamically from a static string. This may be up to 200 characters.
       attr_accessor :lookup_key
-
       # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
       attr_accessor :metadata
-
       # A brief description of the price, hidden from customers.
       attr_accessor :nickname
-
       # The ID of the product that this price will belong to.
       attr_accessor :product
-
       # These fields can be used to create a new product that this price will belong to.
       attr_accessor :product_data
-
       # The recurring components of a price such as `interval` and `usage_type`.
       attr_accessor :recurring
-
       # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
       attr_accessor :tax_behavior
-
       # Each element represents a pricing tier. This parameter requires `billing_scheme` to be set to `tiered`. See also the documentation for `billing_scheme`.
       attr_accessor :tiers
-
       # Defines if the tiering price should be `graduated` or `volume` based. In `volume`-based tiering, the maximum quantity within a period determines the per unit price, in `graduated` tiering pricing can successively change as the quantity grows.
       attr_accessor :tiers_mode
-
       # If set to true, will atomically remove the lookup key from the existing price, and assign it to this price.
       attr_accessor :transfer_lookup_key
-
       # Apply a transformation to the reported usage or set quantity before computing the billed price. Cannot be combined with `tiers`.
       attr_accessor :transform_quantity
-
       # A positive integer in cents (or local equivalent) (or 0 for a free price) representing how much to charge. One of `unit_amount`, `unit_amount_decimal`, or `custom_unit_amount` is required, unless `billing_scheme=tiered`.
       attr_accessor :unit_amount
-
       # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
       attr_accessor :unit_amount_decimal
 
@@ -568,13 +481,10 @@ module Stripe
         class CustomUnitAmount < Stripe::RequestParams
           # Pass in `true` to enable `custom_unit_amount`, otherwise omit `custom_unit_amount`.
           attr_accessor :enabled
-
           # The maximum unit amount the customer can specify for this item.
           attr_accessor :maximum
-
           # The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
           attr_accessor :minimum
-
           # The starting unit amount which can be updated by the customer.
           attr_accessor :preset
 
@@ -589,16 +499,12 @@ module Stripe
         class Tier < Stripe::RequestParams
           # The flat billing amount for an entire tier, regardless of the number of units in the tier.
           attr_accessor :flat_amount
-
           # Same as `flat_amount`, but accepts a decimal value representing an integer in the minor units of the currency. Only one of `flat_amount` and `flat_amount_decimal` can be set.
           attr_accessor :flat_amount_decimal
-
           # The per unit billing amount for each individual unit for which this tier applies.
           attr_accessor :unit_amount
-
           # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
           attr_accessor :unit_amount_decimal
-
           # Specifies the upper bound of this tier. The lower bound of a tier is the upper bound of the previous tier adding one. Use `inf` to define a fallback tier.
           attr_accessor :up_to
 
@@ -618,16 +524,12 @@ module Stripe
         end
         # When set, provides configuration for the amount to be adjusted by the customer during Checkout Sessions and Payment Links.
         attr_accessor :custom_unit_amount
-
         # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
         attr_accessor :tax_behavior
-
         # Each element represents a pricing tier. This parameter requires `billing_scheme` to be set to `tiered`. See also the documentation for `billing_scheme`.
         attr_accessor :tiers
-
         # A positive integer in cents (or local equivalent) (or 0 for a free price) representing how much to charge.
         attr_accessor :unit_amount
-
         # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
         attr_accessor :unit_amount_decimal
 
@@ -649,10 +551,8 @@ module Stripe
       class MigrateTo < Stripe::RequestParams
         # The behavior controlling the point in the subscription lifecycle after which to migrate the price. Currently must be `at_cycle_end`.
         attr_accessor :behavior
-
         # The time after which subscriptions should start using the new price.
         attr_accessor :effective_after
-
         # The ID of the price object.
         attr_accessor :price
 
@@ -664,28 +564,20 @@ module Stripe
       end
       # Whether the price can be used for new purchases. Defaults to `true`.
       attr_accessor :active
-
       # Prices defined in each available currency option. Each key must be a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html) and a [supported currency](https://stripe.com/docs/currencies).
       attr_accessor :currency_options
-
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
-
       # A lookup key used to retrieve prices dynamically from a static string. This may be up to 200 characters.
       attr_accessor :lookup_key
-
       # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
       attr_accessor :metadata
-
       # If specified, subscriptions using this price will be updated to use the new referenced price.
       attr_accessor :migrate_to
-
       # A brief description of the price, hidden from customers.
       attr_accessor :nickname
-
       # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
       attr_accessor :tax_behavior
-
       # If set to true, will atomically remove the lookup key from the existing price, and assign it to this price.
       attr_accessor :transfer_lookup_key
 
@@ -715,13 +607,10 @@ module Stripe
     class SearchParams < Stripe::RequestParams
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
-
       # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
       attr_accessor :limit
-
       # A cursor for pagination across multiple pages of results. Don't include this parameter on the first call. Use the next_page value returned in a previous response to request subsequent results.
       attr_accessor :page
-
       # The search query string. See [search query language](https://stripe.com/docs/search#search-query-language) and the list of supported [query fields for prices](https://stripe.com/docs/search#query-fields-for-prices).
       attr_accessor :query
 
@@ -734,70 +623,48 @@ module Stripe
     end
     # Whether the price can be used for new purchases.
     attr_reader :active
-
     # Describes how to compute the price per period. Either `per_unit` or `tiered`. `per_unit` indicates that the fixed amount (specified in `unit_amount` or `unit_amount_decimal`) will be charged per unit in `quantity` (for prices with `usage_type=licensed`), or per unit of total usage (for prices with `usage_type=metered`). `tiered` indicates that the unit pricing will be computed using a tiering strategy as defined using the `tiers` and `tiers_mode` attributes.
     attr_reader :billing_scheme
-
     # Time at which the object was created. Measured in seconds since the Unix epoch.
     attr_reader :created
-
     # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
     attr_reader :currency
-
     # Prices defined in each available currency option. Each key must be a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html) and a [supported currency](https://stripe.com/docs/currencies).
     attr_reader :currency_options
-
     # When set, provides configuration for the amount to be adjusted by the customer during Checkout Sessions and Payment Links.
     attr_reader :custom_unit_amount
-
     # Unique identifier for the object.
     attr_reader :id
-
     # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
     attr_reader :livemode
-
     # A lookup key used to retrieve prices dynamically from a static string. This may be up to 200 characters.
     attr_reader :lookup_key
-
     # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
     attr_reader :metadata
-
     # Subscriptions using this price will be migrated to use the new referenced price.
     attr_reader :migrate_to
-
     # A brief description of the price, hidden from customers.
     attr_reader :nickname
-
     # String representing the object's type. Objects of the same type share the same value.
     attr_reader :object
-
     # The ID of the product this price is associated with.
     attr_reader :product
-
     # The recurring components of a price such as `interval` and `usage_type`.
     attr_reader :recurring
-
     # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
     attr_reader :tax_behavior
-
     # Each element represents a pricing tier. This parameter requires `billing_scheme` to be set to `tiered`. See also the documentation for `billing_scheme`.
     attr_reader :tiers
-
     # Defines if the tiering price should be `graduated` or `volume` based. In `volume`-based tiering, the maximum quantity within a period determines the per unit price. In `graduated` tiering, pricing can change as the quantity grows.
     attr_reader :tiers_mode
-
     # Apply a transformation to the reported usage or set quantity before computing the amount billed. Cannot be combined with `tiers`.
     attr_reader :transform_quantity
-
     # One of `one_time` or `recurring` depending on whether the price is for a one-time purchase or a recurring (subscription) purchase.
     attr_reader :type
-
     # The unit amount in cents (or local equivalent) to be charged, represented as a whole integer if possible. Only set if `billing_scheme=per_unit`.
     attr_reader :unit_amount
-
     # The unit amount in cents (or local equivalent) to be charged, represented as a decimal string with at most 12 decimal places. Only set if `billing_scheme=per_unit`.
     attr_reader :unit_amount_decimal
-
     # Always true for a deleted object
     attr_reader :deleted