stripe 13.4.0.pre.beta.1 → 13.4.0.pre.beta.2

data/rbi/stripe/services/source_service.rbi

@@ -9,7 +9,6 @@ module Stripe
       # Specifies which fields in the response should be expanded.
       sig { returns(T::Array[String]) }
       attr_accessor :expand
-
       sig { params(expand: T::Array[String]).void }
       def initialize(expand: nil); end
     end
@@ -17,11 +16,9 @@ module Stripe
       # The client secret of the source. Required if a publishable key is used to retrieve the source.
       sig { returns(String) }
       attr_accessor :client_secret
-
       # Specifies which fields in the response should be expanded.
       sig { returns(T::Array[String]) }
       attr_accessor :expand
-
       sig { params(client_secret: String, expand: T::Array[String]).void }
       def initialize(client_secret: nil, expand: nil); end
     end
@@ -32,7 +29,6 @@ module Stripe
             # An email to contact you with if a copy of the mandate is requested, required if `type` is `offline`.
             sig { returns(String) }
             attr_accessor :contact_email
-
             sig { params(contact_email: String).void }
             def initialize(contact_email: nil); end
           end
@@ -40,46 +36,36 @@ module Stripe
             # The Unix timestamp (in seconds) when the mandate was accepted or refused by the customer.
             sig { returns(Integer) }
             attr_accessor :date
-
             # The IP address from which the mandate was accepted or refused by the customer.
             sig { returns(String) }
             attr_accessor :ip
-
             # The user agent of the browser from which the mandate was accepted or refused by the customer.
             sig { returns(String) }
             attr_accessor :user_agent
-
             sig { params(date: Integer, ip: String, user_agent: String).void }
             def initialize(date: nil, ip: nil, user_agent: nil); end
           end
           # The Unix timestamp (in seconds) when the mandate was accepted or refused by the customer.
           sig { returns(Integer) }
           attr_accessor :date
-
           # The IP address from which the mandate was accepted or refused by the customer.
           sig { returns(String) }
           attr_accessor :ip
-
           # The parameters required to store a mandate accepted offline. Should only be set if `mandate[type]` is `offline`
           sig { returns(::Stripe::SourceService::UpdateParams::Mandate::Acceptance::Offline) }
           attr_accessor :offline
-
           # The parameters required to store a mandate accepted online. Should only be set if `mandate[type]` is `online`
           sig { returns(::Stripe::SourceService::UpdateParams::Mandate::Acceptance::Online) }
           attr_accessor :online
-
           # The status of the mandate acceptance. Either `accepted` (the mandate was accepted) or `refused` (the mandate was refused).
           sig { returns(String) }
           attr_accessor :status
-
           # The type of acceptance information included with the mandate. Either `online` or `offline`
           sig { returns(String) }
           attr_accessor :type
-
           # The user agent of the browser from which the mandate was accepted or refused by the customer.
           sig { returns(String) }
           attr_accessor :user_agent
-
           sig {
             params(date: Integer, ip: String, offline: ::Stripe::SourceService::UpdateParams::Mandate::Acceptance::Offline, online: ::Stripe::SourceService::UpdateParams::Mandate::Acceptance::Online, status: String, type: String, user_agent: String).void
            }
@@ -96,23 +82,18 @@ module Stripe
         # The parameters required to notify Stripe of a mandate acceptance or refusal by the customer.
         sig { returns(::Stripe::SourceService::UpdateParams::Mandate::Acceptance) }
         attr_accessor :acceptance
-
         # The amount specified by the mandate. (Leave null for a mandate covering all amounts)
         sig { returns(T.nilable(Integer)) }
         attr_accessor :amount
-
         # The currency specified by the mandate. (Must match `currency` of the source)
         sig { returns(String) }
         attr_accessor :currency
-
         # The interval of debits permitted by the mandate. Either `one_time` (just permitting a single debit), `scheduled` (with debits on an agreed schedule or for clearly-defined events), or `variable`(for debits with any frequency)
         sig { returns(String) }
         attr_accessor :interval
-
         # The method Stripe should use to notify the customer of upcoming debit instructions and/or mandate confirmation as required by the underlying debit network. Either `email` (an email is sent directly to the customer), `manual` (a `source.mandate_notification` event is sent to your webhooks endpoint and you should handle the notification) or `none` (the underlying debit network does not require any notification).
         sig { returns(String) }
         attr_accessor :notification_method
-
         sig {
           params(acceptance: ::Stripe::SourceService::UpdateParams::Mandate::Acceptance, amount: T.nilable(Integer), currency: String, interval: String, notification_method: String).void
          }
@@ -129,27 +110,21 @@ module Stripe
           # City, district, suburb, town, or village.
           sig { returns(String) }
           attr_accessor :city
-
           # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
           sig { returns(String) }
           attr_accessor :country
-
           # Address line 1 (e.g., street, PO Box, or company name).
           sig { returns(String) }
           attr_accessor :line1
-
           # Address line 2 (e.g., apartment, suite, unit, or building).
           sig { returns(String) }
           attr_accessor :line2
-
           # ZIP or postal code.
           sig { returns(String) }
           attr_accessor :postal_code
-
           # State, county, province, or region.
           sig { returns(String) }
           attr_accessor :state
-
           sig {
             params(city: String, country: String, line1: String, line2: String, postal_code: String, state: String).void
            }
@@ -165,19 +140,15 @@ module Stripe
         # Owner's address.
         sig { returns(::Stripe::SourceService::UpdateParams::Owner::Address) }
         attr_accessor :address
-
         # Owner's email address.
         sig { returns(String) }
         attr_accessor :email
-
         # Owner's full name.
         sig { returns(String) }
         attr_accessor :name
-
         # Owner's phone number.
         sig { returns(String) }
         attr_accessor :phone
-
         sig {
           params(address: ::Stripe::SourceService::UpdateParams::Owner::Address, email: String, name: String, phone: String).void
          }
@@ -188,27 +159,21 @@ module Stripe
           # Attribute for param field amount
           sig { returns(Integer) }
           attr_accessor :amount
-
           # Attribute for param field currency
           sig { returns(String) }
           attr_accessor :currency
-
           # Attribute for param field description
           sig { returns(String) }
           attr_accessor :description
-
           # The ID of the SKU being ordered.
           sig { returns(String) }
           attr_accessor :parent
-
           # The quantity of this order item. When type is `sku`, this is the number of instances of the SKU to be ordered.
           sig { returns(Integer) }
           attr_accessor :quantity
-
           # Attribute for param field type
           sig { returns(String) }
           attr_accessor :type
-
           sig {
             params(amount: Integer, currency: String, description: String, parent: String, quantity: Integer, type: String).void
            }
@@ -226,27 +191,21 @@ module Stripe
             # City, district, suburb, town, or village.
             sig { returns(String) }
             attr_accessor :city
-
             # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
             sig { returns(String) }
             attr_accessor :country
-
             # Address line 1 (e.g., street, PO Box, or company name).
             sig { returns(String) }
             attr_accessor :line1
-
             # Address line 2 (e.g., apartment, suite, unit, or building).
             sig { returns(String) }
             attr_accessor :line2
-
             # ZIP or postal code.
             sig { returns(String) }
             attr_accessor :postal_code
-
             # State, county, province, or region.
             sig { returns(String) }
             attr_accessor :state
-
             sig {
               params(city: String, country: String, line1: String, line2: String, postal_code: String, state: String).void
              }
@@ -262,23 +221,18 @@ module Stripe
           # Shipping address.
           sig { returns(::Stripe::SourceService::UpdateParams::SourceOrder::Shipping::Address) }
           attr_accessor :address
-
           # The delivery service that shipped a physical product, such as Fedex, UPS, USPS, etc.
           sig { returns(String) }
           attr_accessor :carrier
-
           # Recipient name.
           sig { returns(String) }
           attr_accessor :name
-
           # Recipient phone (including extension).
           sig { returns(String) }
           attr_accessor :phone
-
           # The tracking number for a physical product, obtained from the delivery service. If multiple tracking numbers were generated for this purchase, please separate them with commas.
           sig { returns(String) }
           attr_accessor :tracking_number
-
           sig {
             params(address: ::Stripe::SourceService::UpdateParams::SourceOrder::Shipping::Address, carrier: String, name: String, phone: String, tracking_number: String).void
            }
@@ -293,11 +247,9 @@ module Stripe
         # List of items constituting the order.
         sig { returns(T::Array[::Stripe::SourceService::UpdateParams::SourceOrder::Item]) }
         attr_accessor :items
-
         # Shipping address for the order. Required if any of the SKUs are for products that have `shippable` set to true.
         sig { returns(::Stripe::SourceService::UpdateParams::SourceOrder::Shipping) }
         attr_accessor :shipping
-
         sig {
           params(items: T::Array[::Stripe::SourceService::UpdateParams::SourceOrder::Item], shipping: ::Stripe::SourceService::UpdateParams::SourceOrder::Shipping).void
          }
@@ -306,27 +258,21 @@ module Stripe
       # Amount associated with the source.
       sig { returns(Integer) }
       attr_accessor :amount
-
       # Specifies which fields in the response should be expanded.
       sig { returns(T::Array[String]) }
       attr_accessor :expand
-
       # Information about a mandate possibility attached to a source object (generally for bank debits) as well as its acceptance status.
       sig { returns(::Stripe::SourceService::UpdateParams::Mandate) }
       attr_accessor :mandate
-
       # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
       sig { returns(T.nilable(T::Hash[String, String])) }
       attr_accessor :metadata
-
       # Information about the owner of the payment instrument that may be used or required by particular source types.
       sig { returns(::Stripe::SourceService::UpdateParams::Owner) }
       attr_accessor :owner
-
       # Information about the items and shipping associated with the source. Required for transactional credit (for example Klarna) sources before you can charge it.
       sig { returns(::Stripe::SourceService::UpdateParams::SourceOrder) }
       attr_accessor :source_order
-
       sig {
         params(amount: Integer, expand: T::Array[String], mandate: ::Stripe::SourceService::UpdateParams::Mandate, metadata: T.nilable(T::Hash[String, String]), owner: ::Stripe::SourceService::UpdateParams::Owner, source_order: ::Stripe::SourceService::UpdateParams::SourceOrder).void
        }
@@ -346,7 +292,6 @@ module Stripe
             # An email to contact you with if a copy of the mandate is requested, required if `type` is `offline`.
             sig { returns(String) }
             attr_accessor :contact_email
-
             sig { params(contact_email: String).void }
             def initialize(contact_email: nil); end
           end
@@ -354,46 +299,36 @@ module Stripe
             # The Unix timestamp (in seconds) when the mandate was accepted or refused by the customer.
             sig { returns(Integer) }
             attr_accessor :date
-
             # The IP address from which the mandate was accepted or refused by the customer.
             sig { returns(String) }
             attr_accessor :ip
-
             # The user agent of the browser from which the mandate was accepted or refused by the customer.
             sig { returns(String) }
             attr_accessor :user_agent
-
             sig { params(date: Integer, ip: String, user_agent: String).void }
             def initialize(date: nil, ip: nil, user_agent: nil); end
           end
           # The Unix timestamp (in seconds) when the mandate was accepted or refused by the customer.
           sig { returns(Integer) }
           attr_accessor :date
-
           # The IP address from which the mandate was accepted or refused by the customer.
           sig { returns(String) }
           attr_accessor :ip
-
           # The parameters required to store a mandate accepted offline. Should only be set if `mandate[type]` is `offline`
           sig { returns(::Stripe::SourceService::CreateParams::Mandate::Acceptance::Offline) }
           attr_accessor :offline
-
           # The parameters required to store a mandate accepted online. Should only be set if `mandate[type]` is `online`
           sig { returns(::Stripe::SourceService::CreateParams::Mandate::Acceptance::Online) }
           attr_accessor :online
-
           # The status of the mandate acceptance. Either `accepted` (the mandate was accepted) or `refused` (the mandate was refused).
           sig { returns(String) }
           attr_accessor :status
-
           # The type of acceptance information included with the mandate. Either `online` or `offline`
           sig { returns(String) }
           attr_accessor :type
-
           # The user agent of the browser from which the mandate was accepted or refused by the customer.
           sig { returns(String) }
           attr_accessor :user_agent
-
           sig {
             params(date: Integer, ip: String, offline: ::Stripe::SourceService::CreateParams::Mandate::Acceptance::Offline, online: ::Stripe::SourceService::CreateParams::Mandate::Acceptance::Online, status: String, type: String, user_agent: String).void
            }
@@ -410,23 +345,18 @@ module Stripe
         # The parameters required to notify Stripe of a mandate acceptance or refusal by the customer.
         sig { returns(::Stripe::SourceService::CreateParams::Mandate::Acceptance) }
         attr_accessor :acceptance
-
         # The amount specified by the mandate. (Leave null for a mandate covering all amounts)
         sig { returns(T.nilable(Integer)) }
         attr_accessor :amount
-
         # The currency specified by the mandate. (Must match `currency` of the source)
         sig { returns(String) }
         attr_accessor :currency
-
         # The interval of debits permitted by the mandate. Either `one_time` (just permitting a single debit), `scheduled` (with debits on an agreed schedule or for clearly-defined events), or `variable`(for debits with any frequency)
         sig { returns(String) }
         attr_accessor :interval
-
         # The method Stripe should use to notify the customer of upcoming debit instructions and/or mandate confirmation as required by the underlying debit network. Either `email` (an email is sent directly to the customer), `manual` (a `source.mandate_notification` event is sent to your webhooks endpoint and you should handle the notification) or `none` (the underlying debit network does not require any notification).
         sig { returns(String) }
         attr_accessor :notification_method
-
         sig {
           params(acceptance: ::Stripe::SourceService::CreateParams::Mandate::Acceptance, amount: T.nilable(Integer), currency: String, interval: String, notification_method: String).void
          }
@@ -443,27 +373,21 @@ module Stripe
           # City, district, suburb, town, or village.
           sig { returns(String) }
           attr_accessor :city
-
           # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
           sig { returns(String) }
           attr_accessor :country
-
           # Address line 1 (e.g., street, PO Box, or company name).
           sig { returns(String) }
           attr_accessor :line1
-
           # Address line 2 (e.g., apartment, suite, unit, or building).
           sig { returns(String) }
           attr_accessor :line2
-
           # ZIP or postal code.
           sig { returns(String) }
           attr_accessor :postal_code
-
           # State, county, province, or region.
           sig { returns(String) }
           attr_accessor :state
-
           sig {
             params(city: String, country: String, line1: String, line2: String, postal_code: String, state: String).void
            }
@@ -479,19 +403,15 @@ module Stripe
         # Owner's address.
         sig { returns(::Stripe::SourceService::CreateParams::Owner::Address) }
         attr_accessor :address
-
         # Owner's email address.
         sig { returns(String) }
         attr_accessor :email
-
         # Owner's full name.
         sig { returns(String) }
         attr_accessor :name
-
         # Owner's phone number.
         sig { returns(String) }
         attr_accessor :phone
-
         sig {
           params(address: ::Stripe::SourceService::CreateParams::Owner::Address, email: String, name: String, phone: String).void
          }
@@ -501,7 +421,6 @@ module Stripe
         # The method Stripe should use to request information needed to process a refund or mispayment. Either `email` (an email is sent directly to the customer) or `manual` (a `source.refund_attributes_required` event is sent to your webhooks endpoint). Refer to each payment method's documentation to learn which refund attributes may be required.
         sig { returns(String) }
         attr_accessor :refund_attributes_method
-
         sig { params(refund_attributes_method: String).void }
         def initialize(refund_attributes_method: nil); end
       end
@@ -509,7 +428,6 @@ module Stripe
         # The URL you provide to redirect the customer back to you after they authenticated their payment. It can use your application URI scheme in the context of a mobile application.
         sig { returns(String) }
         attr_accessor :return_url
-
         sig { params(return_url: String).void }
         def initialize(return_url: nil); end
       end
@@ -518,27 +436,21 @@ module Stripe
           # Attribute for param field amount
           sig { returns(Integer) }
           attr_accessor :amount
-
           # Attribute for param field currency
           sig { returns(String) }
           attr_accessor :currency
-
           # Attribute for param field description
           sig { returns(String) }
           attr_accessor :description
-
           # The ID of the SKU being ordered.
           sig { returns(String) }
           attr_accessor :parent
-
           # The quantity of this order item. When type is `sku`, this is the number of instances of the SKU to be ordered.
           sig { returns(Integer) }
           attr_accessor :quantity
-
           # Attribute for param field type
           sig { returns(String) }
           attr_accessor :type
-
           sig {
             params(amount: Integer, currency: String, description: String, parent: String, quantity: Integer, type: String).void
            }
@@ -556,27 +468,21 @@ module Stripe
             # City, district, suburb, town, or village.
             sig { returns(String) }
             attr_accessor :city
-
             # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
             sig { returns(String) }
             attr_accessor :country
-
             # Address line 1 (e.g., street, PO Box, or company name).
             sig { returns(String) }
             attr_accessor :line1
-
             # Address line 2 (e.g., apartment, suite, unit, or building).
             sig { returns(String) }
             attr_accessor :line2
-
             # ZIP or postal code.
             sig { returns(String) }
             attr_accessor :postal_code
-
             # State, county, province, or region.
             sig { returns(String) }
             attr_accessor :state
-
             sig {
               params(city: String, country: String, line1: String, line2: String, postal_code: String, state: String).void
              }
@@ -592,23 +498,18 @@ module Stripe
           # Shipping address.
           sig { returns(::Stripe::SourceService::CreateParams::SourceOrder::Shipping::Address) }
           attr_accessor :address
-
           # The delivery service that shipped a physical product, such as Fedex, UPS, USPS, etc.
           sig { returns(String) }
           attr_accessor :carrier
-
           # Recipient name.
           sig { returns(String) }
           attr_accessor :name
-
           # Recipient phone (including extension).
           sig { returns(String) }
           attr_accessor :phone
-
           # The tracking number for a physical product, obtained from the delivery service. If multiple tracking numbers were generated for this purchase, please separate them with commas.
           sig { returns(String) }
           attr_accessor :tracking_number
-
           sig {
             params(address: ::Stripe::SourceService::CreateParams::SourceOrder::Shipping::Address, carrier: String, name: String, phone: String, tracking_number: String).void
            }
@@ -623,11 +524,9 @@ module Stripe
         # List of items constituting the order.
         sig { returns(T::Array[::Stripe::SourceService::CreateParams::SourceOrder::Item]) }
         attr_accessor :items
-
         # Shipping address for the order. Required if any of the SKUs are for products that have `shippable` set to true.
         sig { returns(::Stripe::SourceService::CreateParams::SourceOrder::Shipping) }
         attr_accessor :shipping
-
         sig {
           params(items: T::Array[::Stripe::SourceService::CreateParams::SourceOrder::Item], shipping: ::Stripe::SourceService::CreateParams::SourceOrder::Shipping).void
          }
@@ -636,67 +535,51 @@ module Stripe
       # Amount associated with the source. This is the amount for which the source will be chargeable once ready. Required for `single_use` sources. Not supported for `receiver` type sources, where charge amount may not be specified until funds land.
       sig { returns(Integer) }
       attr_accessor :amount
-
       # Three-letter [ISO code for the currency](https://stripe.com/docs/currencies) associated with the source. This is the currency for which the source will be chargeable once ready.
       sig { returns(String) }
       attr_accessor :currency
-
       # The `Customer` to whom the original source is attached to. Must be set when the original source is not a `Source` (e.g., `Card`).
       sig { returns(String) }
       attr_accessor :customer
-
       # Specifies which fields in the response should be expanded.
       sig { returns(T::Array[String]) }
       attr_accessor :expand
-
       # The authentication `flow` of the source to create. `flow` is one of `redirect`, `receiver`, `code_verification`, `none`. It is generally inferred unless a type supports multiple flows.
       sig { returns(String) }
       attr_accessor :flow
-
       # Information about a mandate possibility attached to a source object (generally for bank debits) as well as its acceptance status.
       sig { returns(::Stripe::SourceService::CreateParams::Mandate) }
       attr_accessor :mandate
-
       # Attribute for param field metadata
       sig { returns(T::Hash[String, String]) }
       attr_accessor :metadata
-
       # The source to share.
       sig { returns(String) }
       attr_accessor :original_source
-
       # Information about the owner of the payment instrument that may be used or required by particular source types.
       sig { returns(::Stripe::SourceService::CreateParams::Owner) }
       attr_accessor :owner
-
       # Optional parameters for the receiver flow. Can be set only if the source is a receiver (`flow` is `receiver`).
       sig { returns(::Stripe::SourceService::CreateParams::Receiver) }
       attr_accessor :receiver
-
       # Parameters required for the redirect flow. Required if the source is authenticated by a redirect (`flow` is `redirect`).
       sig { returns(::Stripe::SourceService::CreateParams::Redirect) }
       attr_accessor :redirect
-
       # Information about the items and shipping associated with the source. Required for transactional credit (for example Klarna) sources before you can charge it.
       sig { returns(::Stripe::SourceService::CreateParams::SourceOrder) }
       attr_accessor :source_order
-
       # An arbitrary string to be displayed on your customer's statement. As an example, if your website is `RunClub` and the item you're charging for is a race ticket, you may want to specify a `statement_descriptor` of `RunClub 5K race ticket.` While many payment types will display this information, some may not display it at all.
       sig { returns(String) }
       attr_accessor :statement_descriptor
-
       # An optional token used to create the source. When passed, token properties will override source parameters.
       sig { returns(String) }
       attr_accessor :token
-
       # The `type` of the source to create. Required unless `customer` and `original_source` are specified (see the [Cloning card Sources](https://stripe.com/docs/sources/connect#cloning-card-sources) guide)
       sig { returns(String) }
       attr_accessor :type
-
       # Attribute for param field usage
       sig { returns(String) }
       attr_accessor :usage
-
       sig {
         params(amount: Integer, currency: String, customer: String, expand: T::Array[String], flow: String, mandate: ::Stripe::SourceService::CreateParams::Mandate, metadata: T::Hash[String, String], original_source: String, owner: ::Stripe::SourceService::CreateParams::Owner, receiver: ::Stripe::SourceService::CreateParams::Receiver, redirect: ::Stripe::SourceService::CreateParams::Redirect, source_order: ::Stripe::SourceService::CreateParams::SourceOrder, statement_descriptor: String, token: String, type: String, usage: String).void
        }
@@ -723,11 +606,9 @@ module Stripe
       # Specifies which fields in the response should be expanded.
       sig { returns(T::Array[String]) }
       attr_accessor :expand
-
       # The values needed to verify the source.
       sig { returns(T::Array[String]) }
       attr_accessor :values
-
       sig { params(expand: T::Array[String], values: T::Array[String]).void }
       def initialize(expand: nil, values: nil); end
     end

data/rbi/stripe/services/source_transaction_service.rbi

@@ -8,19 +8,15 @@ module Stripe
       # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
       sig { returns(String) }
       attr_accessor :ending_before
-
       # Specifies which fields in the response should be expanded.
       sig { returns(T::Array[String]) }
       attr_accessor :expand
-
       # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
       sig { returns(Integer) }
       attr_accessor :limit
-
       # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
       sig { returns(String) }
       attr_accessor :starting_after
-
       sig {
         params(ending_before: String, expand: T::Array[String], limit: Integer, starting_after: String).void
        }