stripe 13.4.0.pre.beta.1 → 13.4.0.pre.beta.2

data/lib/stripe/services/account_session_service.rb

@@ -9,7 +9,6 @@ module Stripe
           class Features < Stripe::RequestParams
             # Disables Stripe user authentication for this embedded component. This value can only be true for accounts where `controller.requirement_collection` is `application`. The default value is the opposite of the `external_account_collection` value. For example, if you don’t set `external_account_collection`, it defaults to true and `disable_stripe_user_authentication` defaults to false.
             attr_accessor :disable_stripe_user_authentication
-
             # Whether to allow platforms to control bank account collection for their connected accounts. This feature can only be false for accounts where you’re responsible for collecting updated information when requirements are due or change, like custom accounts. Otherwise, bank account collection is determined by compliance requirements. The default value for this feature is `true`.
             attr_accessor :external_account_collection
 
@@ -23,7 +22,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -37,7 +35,6 @@ module Stripe
           class Features < Stripe::RequestParams
             # Disables Stripe user authentication for this embedded component. This value can only be true for accounts where `controller.requirement_collection` is `application`. The default value is the opposite of the `external_account_collection` value. For example, if you don’t set `external_account_collection`, it defaults to true and `disable_stripe_user_authentication` defaults to false.
             attr_accessor :disable_stripe_user_authentication
-
             # Whether to allow platforms to control bank account collection for their connected accounts. This feature can only be false for accounts where you’re responsible for collecting updated information when requirements are due or change, like custom accounts. Otherwise, bank account collection is determined by compliance requirements. The default value for this feature is `true`.
             attr_accessor :external_account_collection
 
@@ -51,7 +48,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -72,7 +68,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -93,7 +88,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -107,16 +101,12 @@ module Stripe
           class Features < Stripe::RequestParams
             # Disables Stripe user authentication for this embedded component. This value can only be true for accounts where `controller.requirement_collection` is `application`. The default value is the opposite of the `external_account_collection` value. For example, if you don’t set `external_account_collection`, it defaults to true and `disable_stripe_user_authentication` defaults to false.
             attr_accessor :disable_stripe_user_authentication
-
             # Whether to allow payout schedule to be changed. Default `true` when Stripe owns Loss Liability, default `false` otherwise.
             attr_accessor :edit_payout_schedule
-
             # Whether to allow platforms to control bank account collection for their connected accounts. This feature can only be false for accounts where you’re responsible for collecting updated information when requirements are due or change, like custom accounts. Otherwise, bank account collection is determined by compliance requirements. The default value for this feature is `true`.
             attr_accessor :external_account_collection
-
             # Whether to allow creation of instant payouts. Default `true` when Stripe owns Loss Liability, default `false` otherwise.
             attr_accessor :instant_payouts
-
             # Whether to allow creation of standard payouts. Default `true` when Stripe owns Loss Liability, default `false` otherwise.
             attr_accessor :standard_payouts
 
@@ -136,7 +126,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -151,7 +140,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -166,7 +154,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -181,7 +168,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -196,7 +182,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -211,7 +196,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -225,13 +209,10 @@ module Stripe
           class Features < Stripe::RequestParams
             # Disables Stripe user authentication for this embedded component. This value can only be true for accounts where `controller.requirement_collection` is `application`. The default value is the opposite of the `external_account_collection` value. For example, if you don’t set `external_account_collection`, it defaults to true and `disable_stripe_user_authentication` defaults to false.
             attr_accessor :disable_stripe_user_authentication
-
             # Whether to allow external accounts to be linked for money transfer.
             attr_accessor :external_account_collection
-
             # Whether to allow sending money.
             attr_accessor :send_money
-
             # Whether to allow transferring balance.
             attr_accessor :transfer_balance
 
@@ -249,7 +230,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -270,7 +250,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -284,13 +263,10 @@ module Stripe
           class Features < Stripe::RequestParams
             # Whether to allow card management features.
             attr_accessor :card_management
-
             # Whether to allow card spend dispute management features.
             attr_accessor :card_spend_dispute_management
-
             # Whether to allow cardholder management features.
             attr_accessor :cardholder_management
-
             # Whether to allow spend control management features.
             attr_accessor :spend_control_management
 
@@ -308,7 +284,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -322,16 +297,12 @@ module Stripe
           class Features < Stripe::RequestParams
             # Whether to allow card management features.
             attr_accessor :card_management
-
             # Whether to allow card spend dispute management features.
             attr_accessor :card_spend_dispute_management
-
             # Whether to allow cardholder management features.
             attr_accessor :cardholder_management
-
             # Disables Stripe user authentication for this embedded component. This feature can only be false for accounts where you’re responsible for collecting updated information when requirements are due or change, like custom accounts.
             attr_accessor :disable_stripe_user_authentication
-
             # Whether to allow spend control management features.
             attr_accessor :spend_control_management
 
@@ -351,7 +322,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -365,7 +335,6 @@ module Stripe
           class Features < Stripe::RequestParams
             # Disables Stripe user authentication for this embedded component. This value can only be true for accounts where `controller.requirement_collection` is `application`. The default value is the opposite of the `external_account_collection` value. For example, if you don’t set `external_account_collection`, it defaults to true and `disable_stripe_user_authentication` defaults to false.
             attr_accessor :disable_stripe_user_authentication
-
             # Whether to allow platforms to control bank account collection for their connected accounts. This feature can only be false for accounts where you’re responsible for collecting updated information when requirements are due or change, like custom accounts. Otherwise, bank account collection is determined by compliance requirements. The default value for this feature is `true`.
             attr_accessor :external_account_collection
 
@@ -379,7 +348,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -393,13 +361,10 @@ module Stripe
           class Features < Stripe::RequestParams
             # Whether to allow capturing and cancelling payment intents. This is `true` by default.
             attr_accessor :capture_payments
-
             # Whether to allow connected accounts to manage destination charges that are created on behalf of them. This is `false` by default.
             attr_accessor :destination_on_behalf_of_charge_management
-
             # Whether to allow responding to disputes, including submitting evidence and accepting disputes. This is `true` by default.
             attr_accessor :dispute_management
-
             # Whether to allow sending refunds. This is `true` by default.
             attr_accessor :refund_management
 
@@ -417,7 +382,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -432,7 +396,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -446,13 +409,10 @@ module Stripe
           class Features < Stripe::RequestParams
             # Whether to allow capturing and cancelling payment intents. This is `true` by default.
             attr_accessor :capture_payments
-
             # Whether to allow connected accounts to manage destination charges that are created on behalf of them. This is `false` by default.
             attr_accessor :destination_on_behalf_of_charge_management
-
             # Whether to allow responding to disputes, including submitting evidence and accepting disputes. This is `true` by default.
             attr_accessor :dispute_management
-
             # Whether to allow sending refunds. This is `true` by default.
             attr_accessor :refund_management
 
@@ -470,7 +430,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -484,16 +443,12 @@ module Stripe
           class Features < Stripe::RequestParams
             # Disables Stripe user authentication for this embedded component. This value can only be true for accounts where `controller.requirement_collection` is `application`. The default value is the opposite of the `external_account_collection` value. For example, if you don’t set `external_account_collection`, it defaults to true and `disable_stripe_user_authentication` defaults to false.
             attr_accessor :disable_stripe_user_authentication
-
             # Whether to allow payout schedule to be changed. Default `true` when Stripe owns Loss Liability, default `false` otherwise.
             attr_accessor :edit_payout_schedule
-
             # Whether to allow platforms to control bank account collection for their connected accounts. This feature can only be false for accounts where you’re responsible for collecting updated information when requirements are due or change, like custom accounts. Otherwise, bank account collection is determined by compliance requirements. The default value for this feature is `true`.
             attr_accessor :external_account_collection
-
             # Whether to allow creation of instant payouts. Default `true` when Stripe owns Loss Liability, default `false` otherwise.
             attr_accessor :instant_payouts
-
             # Whether to allow creation of standard payouts. Default `true` when Stripe owns Loss Liability, default `false` otherwise.
             attr_accessor :standard_payouts
 
@@ -513,7 +468,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -528,7 +482,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -549,7 +502,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # Attribute for param field features
           attr_accessor :features
 
@@ -564,7 +516,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -579,7 +530,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -594,7 +544,6 @@ module Stripe
           end
           # Whether the embedded component is enabled.
           attr_accessor :enabled
-
           # The list of features enabled in the embedded component.
           attr_accessor :features
 
@@ -605,73 +554,50 @@ module Stripe
         end
         # Configuration for the account management embedded component.
         attr_accessor :account_management
-
         # Configuration for the account onboarding embedded component.
         attr_accessor :account_onboarding
-
         # Configuration for the app install component.
         attr_accessor :app_install
-
         # Configuration for the app viewport component.
         attr_accessor :app_viewport
-
         # Configuration for the balances embedded component.
         attr_accessor :balances
-
         # Configuration for the capital financing embedded component.
         attr_accessor :capital_financing
-
         # Configuration for the capital financing application embedded component.
         attr_accessor :capital_financing_application
-
         # Configuration for the capital financing promotion embedded component.
         attr_accessor :capital_financing_promotion
-
         # Configuration for the capital overview embedded component.
         attr_accessor :capital_overview
-
         # Configuration for the documents embedded component.
         attr_accessor :documents
-
         # Configuration for the financial account component.
         attr_accessor :financial_account
-
         # Configuration for the financial account transactions component.
         attr_accessor :financial_account_transactions
-
         # Configuration for the issuing card component.
         attr_accessor :issuing_card
-
         # Configuration for the issuing cards list component.
         attr_accessor :issuing_cards_list
-
         # Configuration for the notification banner embedded component.
         attr_accessor :notification_banner
-
         # Configuration for the payment details embedded component.
         attr_accessor :payment_details
-
         # Configuration for the payment method settings embedded component.
         attr_accessor :payment_method_settings
-
         # Configuration for the payments embedded component.
         attr_accessor :payments
-
         # Configuration for the payouts embedded component.
         attr_accessor :payouts
-
         # Configuration for the payouts list embedded component.
         attr_accessor :payouts_list
-
         # Configuration for the recipients component.
         attr_accessor :recipients
-
         # Configuration for the reporting chart embedded component.
         attr_accessor :reporting_chart
-
         # Configuration for the tax registrations embedded component.
         attr_accessor :tax_registrations
-
         # Configuration for the tax settings embedded component.
         attr_accessor :tax_settings
 
@@ -729,10 +655,8 @@ module Stripe
       end
       # The identifier of the account to create an Account Session for.
       attr_accessor :account
-
       # Each key of the dictionary represents an embedded component, and each embedded component maps to its configuration (e.g. whether it has been enabled or not).
       attr_accessor :components
-
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
 

data/lib/stripe/services/apple_pay_domain_service.rb

@@ -18,16 +18,12 @@ module Stripe
     class ListParams < Stripe::RequestParams
       # Attribute for param field domain_name
       attr_accessor :domain_name
-
       # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
       attr_accessor :ending_before
-
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
-
       # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
       attr_accessor :limit
-
       # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
       attr_accessor :starting_after
 
@@ -49,7 +45,6 @@ module Stripe
     class CreateParams < Stripe::RequestParams
       # Attribute for param field domain_name
       attr_accessor :domain_name
-
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
 

data/lib/stripe/services/application_fee_refund_service.rb

@@ -15,7 +15,6 @@ module Stripe
     class UpdateParams < Stripe::RequestParams
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
-
       # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
       attr_accessor :metadata
 
@@ -28,13 +27,10 @@ module Stripe
     class ListParams < Stripe::RequestParams
       # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
       attr_accessor :ending_before
-
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
-
       # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
       attr_accessor :limit
-
       # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
       attr_accessor :starting_after
 
@@ -49,10 +45,8 @@ module Stripe
     class CreateParams < Stripe::RequestParams
       # A positive integer, in _cents (or local equivalent)_, representing how much of this fee to refund. Can refund only up to the remaining unrefunded amount of the fee.
       attr_accessor :amount
-
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
-
       # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
       attr_accessor :metadata
 

data/lib/stripe/services/application_fee_service.rb

@@ -14,13 +14,10 @@ module Stripe
       class Created < Stripe::RequestParams
         # Minimum value to filter by (exclusive)
         attr_accessor :gt
-
         # Minimum value to filter by (inclusive)
         attr_accessor :gte
-
         # Maximum value to filter by (exclusive)
         attr_accessor :lt
-
         # Maximum value to filter by (inclusive)
         attr_accessor :lte
 
@@ -33,19 +30,14 @@ module Stripe
       end
       # Only return application fees for the charge specified by this charge ID.
       attr_accessor :charge
-
       # Only return applications fees that were created during the given date interval.
       attr_accessor :created
-
       # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
       attr_accessor :ending_before
-
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
-
       # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
       attr_accessor :limit
-
       # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
       attr_accessor :starting_after
 

data/lib/stripe/services/apps/secret_service.rb

@@ -8,7 +8,6 @@ module Stripe
         class Scope < Stripe::RequestParams
           # The secret scope type.
           attr_accessor :type
-
           # The user ID. This field is required if `type` is set to `user`, and should not be provided if `type` is set to `account`.
           attr_accessor :user
 
@@ -19,16 +18,12 @@ module Stripe
         end
         # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
         attr_accessor :ending_before
-
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
         attr_accessor :limit
-
         # Specifies the scoping of the secret. Requests originating from UI extensions can only access account-scoped secrets or secrets scoped to their own user.
         attr_accessor :scope
-
         # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
         attr_accessor :starting_after
 
@@ -45,7 +40,6 @@ module Stripe
         class Scope < Stripe::RequestParams
           # The secret scope type.
           attr_accessor :type
-
           # The user ID. This field is required if `type` is set to `user`, and should not be provided if `type` is set to `account`.
           attr_accessor :user
 
@@ -56,16 +50,12 @@ module Stripe
         end
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # The Unix timestamp for the expiry time of the secret, after which the secret deletes.
         attr_accessor :expires_at
-
         # A name for the secret that's unique within the scope.
         attr_accessor :name
-
         # The plaintext secret value to be stored.
         attr_accessor :payload
-
         # Specifies the scoping of the secret. Requests originating from UI extensions can only access account-scoped secrets or secrets scoped to their own user.
         attr_accessor :scope
 
@@ -82,7 +72,6 @@ module Stripe
         class Scope < Stripe::RequestParams
           # The secret scope type.
           attr_accessor :type
-
           # The user ID. This field is required if `type` is set to `user`, and should not be provided if `type` is set to `account`.
           attr_accessor :user
 
@@ -93,10 +82,8 @@ module Stripe
         end
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # A name for the secret that's unique within the scope.
         attr_accessor :name
-
         # Specifies the scoping of the secret. Requests originating from UI extensions can only access account-scoped secrets or secrets scoped to their own user.
         attr_accessor :scope
 
@@ -111,7 +98,6 @@ module Stripe
         class Scope < Stripe::RequestParams
           # The secret scope type.
           attr_accessor :type
-
           # The user ID. This field is required if `type` is set to `user`, and should not be provided if `type` is set to `account`.
           attr_accessor :user
 
@@ -122,10 +108,8 @@ module Stripe
         end
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # A name for the secret that's unique within the scope.
         attr_accessor :name
-
         # Specifies the scoping of the secret. Requests originating from UI extensions can only access account-scoped secrets or secrets scoped to their own user.
         attr_accessor :scope
 

data/lib/stripe/services/balance_transaction_service.rb

@@ -7,13 +7,10 @@ module Stripe
       class Created < Stripe::RequestParams
         # Minimum value to filter by (exclusive)
         attr_accessor :gt
-
         # Minimum value to filter by (inclusive)
         attr_accessor :gte
-
         # Maximum value to filter by (exclusive)
         attr_accessor :lt
-
         # Maximum value to filter by (inclusive)
         attr_accessor :lte
 
@@ -26,28 +23,20 @@ module Stripe
       end
       # Only return transactions that were created during the given date interval.
       attr_accessor :created
-
       # Only return transactions in a certain currency. Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
       attr_accessor :currency
-
       # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
       attr_accessor :ending_before
-
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
-
       # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
       attr_accessor :limit
-
       # For automatic Stripe payouts only, only returns transactions that were paid out on the specified payout ID.
       attr_accessor :payout
-
       # Only returns the original transaction.
       attr_accessor :source
-
       # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
       attr_accessor :starting_after
-
       # Only returns transactions of the given type. One of: `adjustment`, `advance`, `advance_funding`, `anticipation_repayment`, `application_fee`, `application_fee_refund`, `charge`, `climate_order_purchase`, `climate_order_refund`, `connect_collection_transfer`, `contribution`, `issuing_authorization_hold`, `issuing_authorization_release`, `issuing_dispute`, `issuing_transaction`, `obligation_outbound`, `obligation_reversal_inbound`, `payment`, `payment_failure_refund`, `payment_network_reserve_hold`, `payment_network_reserve_release`, `payment_refund`, `payment_reversal`, `payment_unreconciled`, `payout`, `payout_cancel`, `payout_failure`, `payout_minimum_balance_hold`, `payout_minimum_balance_release`, `refund`, `refund_failure`, `reserve_transaction`, `reserved_funds`, `stripe_fee`, `stripe_fx_fee`, `tax_fee`, `topup`, `topup_reversal`, `transfer`, `transfer_cancel`, `transfer_failure`, or `transfer_refund`.
       attr_accessor :type
 

data/lib/stripe/services/billing/alert_service.rb

@@ -7,19 +7,14 @@ module Stripe
       class ListParams < Stripe::RequestParams
         # Filter results to only include this type of alert.
         attr_accessor :alert_type
-
         # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
         attr_accessor :ending_before
-
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
         attr_accessor :limit
-
         # Filter results to only include alerts with the given meter.
         attr_accessor :meter
-
         # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
         attr_accessor :starting_after
 
@@ -45,7 +40,6 @@ module Stripe
           class Filter < Stripe::RequestParams
             # Limit the scope to this usage alert only to this customer.
             attr_accessor :customer
-
             # What type of filter is being applied to this usage alert.
             attr_accessor :type
 
@@ -56,13 +50,10 @@ module Stripe
           end
           # The filters allows limiting the scope of this usage alert. You can only specify up to one filter at this time.
           attr_accessor :filters
-
           # Defines at which value the alert will fire.
           attr_accessor :gte
-
           # The [Billing Meter](/api/billing/meter) ID whose usage is monitored.
           attr_accessor :meter
-
           # Whether the alert should only fire only once, or once per billing cycle.
           attr_accessor :recurrence
 
@@ -75,13 +66,10 @@ module Stripe
         end
         # The type of alert to create.
         attr_accessor :alert_type
-
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # The title of the alert.
         attr_accessor :title
-
         # The configuration of the usage threshold.
         attr_accessor :usage_threshold