stripe 13.4.0.pre.beta.1 → 13.4.0.pre.beta.2

data/lib/stripe/resources/treasury/received_debit.rb

@@ -17,28 +17,21 @@ module Stripe
           class Address < Stripe::StripeObject
             # City, district, suburb, town, or village.
             attr_reader :city
-
             # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
             attr_reader :country
-
             # Address line 1 (e.g., street, PO Box, or company name).
             attr_reader :line1
-
             # Address line 2 (e.g., apartment, suite, unit, or building).
             attr_reader :line2
-
             # ZIP or postal code.
             attr_reader :postal_code
-
             # State, county, province, or region.
             attr_reader :state
           end
           # Attribute for field address
           attr_reader :address
-
           # Email address.
           attr_reader :email
-
           # Full name.
           attr_reader :name
         end
@@ -46,7 +39,6 @@ module Stripe
         class FinancialAccount < Stripe::StripeObject
           # The FinancialAccount ID.
           attr_reader :id
-
           # The rails the ReceivedCredit was sent over. A FinancialAccount can only send funds over `stripe`.
           attr_reader :network
         end
@@ -54,28 +46,21 @@ module Stripe
         class UsBankAccount < Stripe::StripeObject
           # Bank name.
           attr_reader :bank_name
-
           # The last four digits of the bank account number.
           attr_reader :last4
-
           # The routing number for the bank account.
           attr_reader :routing_number
         end
         # Set when `type` is `balance`.
         attr_reader :balance
-
         # Attribute for field billing_details
         attr_reader :billing_details
-
         # Attribute for field financial_account
         attr_reader :financial_account
-
         # Set when `type` is `issuing_card`. This is an [Issuing Card](https://stripe.com/docs/api#issuing_cards) ID.
         attr_reader :issuing_card
-
         # Polymorphic type matching the originating money movement's source. This can be an external account, a Stripe balance, or a FinancialAccount.
         attr_reader :type
-
         # Attribute for field us_bank_account
         attr_reader :us_bank_account
       end
@@ -83,19 +68,14 @@ module Stripe
       class LinkedFlows < Stripe::StripeObject
         # The DebitReversal created as a result of this ReceivedDebit being reversed.
         attr_reader :debit_reversal
-
         # Set if the ReceivedDebit is associated with an InboundTransfer's return of funds.
         attr_reader :inbound_transfer
-
         # Set if the ReceivedDebit was created due to an [Issuing Authorization](https://stripe.com/docs/api#issuing_authorizations) object.
         attr_reader :issuing_authorization
-
         # Set if the ReceivedDebit is also viewable as an [Issuing Dispute](https://stripe.com/docs/api#issuing_disputes) object.
         attr_reader :issuing_transaction
-
         # Set if the ReceivedDebit was created due to a [Payout](https://stripe.com/docs/api#payouts) object.
         attr_reader :payout
-
         # The ReceivedCredit that Capital withheld from
         attr_reader :received_credit_capital_withholding
       end
@@ -107,7 +87,6 @@ module Stripe
         end
         # Details about an ACH transaction.
         attr_reader :ach
-
         # The type of flow that originated the ReceivedDebit.
         attr_reader :type
       end
@@ -115,7 +94,6 @@ module Stripe
       class ReversalDetails < Stripe::StripeObject
         # Time before which a ReceivedDebit can be reversed.
         attr_reader :deadline
-
         # Set if a ReceivedDebit can't be reversed.
         attr_reader :restricted_reason
       end
@@ -123,19 +101,14 @@ module Stripe
       class ListParams < Stripe::RequestParams
         # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
         attr_accessor :ending_before
-
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # The FinancialAccount that funds were pulled from.
         attr_accessor :financial_account
-
         # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
         attr_accessor :limit
-
         # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
         attr_accessor :starting_after
-
         # Only return ReceivedDebits that have the given status: `succeeded` or `failed`.
         attr_accessor :status
 
@@ -170,10 +143,8 @@ module Stripe
           class UsBankAccount < Stripe::RequestParams
             # The bank account holder's name.
             attr_accessor :account_holder_name
-
             # The bank account number.
             attr_accessor :account_number
-
             # The bank account's routing number.
             attr_accessor :routing_number
 
@@ -185,7 +156,6 @@ module Stripe
           end
           # The source type.
           attr_accessor :type
-
           # Optional fields for `us_bank_account`.
           attr_accessor :us_bank_account
 
@@ -206,7 +176,6 @@ module Stripe
           end
           # Optional fields for `ach`.
           attr_accessor :ach
-
           # The type of flow that originated the ReceivedDebit.
           attr_accessor :type
 
@@ -217,25 +186,18 @@ module Stripe
         end
         # Amount (in cents) to be transferred.
         attr_accessor :amount
-
         # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
         attr_accessor :currency
-
         # An arbitrary string attached to the object. Often useful for displaying to users.
         attr_accessor :description
-
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # The FinancialAccount to pull funds from.
         attr_accessor :financial_account
-
         # Initiating payment method details for the object.
         attr_accessor :initiating_payment_method_details
-
         # Specifies the network rails to be used. If not set, will default to the PaymentMethod's preferred network. See the [docs](https://stripe.com/docs/treasury/money-movement/timelines) to learn more about money movement timelines for each network type.
         attr_accessor :network
-
         # Details about the network used for the ReceivedDebit.
         attr_accessor :network_details
 
@@ -261,52 +223,36 @@ module Stripe
       end
       # Amount (in cents) transferred.
       attr_reader :amount
-
       # Time at which the object was created. Measured in seconds since the Unix epoch.
       attr_reader :created
-
       # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
       attr_reader :currency
-
       # An arbitrary string attached to the object. Often useful for displaying to users.
       attr_reader :description
-
       # Reason for the failure. A ReceivedDebit might fail because the FinancialAccount doesn't have sufficient funds, is closed, or is frozen.
       attr_reader :failure_code
-
       # The FinancialAccount that funds were pulled from.
       attr_reader :financial_account
-
       # A [hosted transaction receipt](https://stripe.com/docs/treasury/moving-money/regulatory-receipts) URL that is provided when money movement is considered regulated under Stripe's money transmission licenses.
       attr_reader :hosted_regulatory_receipt_url
-
       # Unique identifier for the object.
       attr_reader :id
-
       # Attribute for field initiating_payment_method_details
       attr_reader :initiating_payment_method_details
-
       # Attribute for field linked_flows
       attr_reader :linked_flows
-
       # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
       attr_reader :livemode
-
       # The network used for the ReceivedDebit.
       attr_reader :network
-
       # Details specific to the money movement rails.
       attr_reader :network_details
-
       # String representing the object's type. Objects of the same type share the same value.
       attr_reader :object
-
       # Details describing when a ReceivedDebit might be reversed.
       attr_reader :reversal_details
-
       # Status of the ReceivedDebit. ReceivedDebits are created with a status of either `succeeded` (approved) or `failed` (declined). The failure reason can be found under the `failure_code`.
       attr_reader :status
-
       # The Transaction associated with this object.
       attr_reader :transaction
 

data/lib/stripe/resources/treasury/transaction.rb

@@ -15,10 +15,8 @@ module Stripe
       class BalanceImpact < Stripe::StripeObject
         # The change made to funds the user can spend right now.
         attr_reader :cash
-
         # The change made to funds that are not spendable yet, but will become available at a later time.
         attr_reader :inbound_pending
-
         # The change made to funds in the account, but not spendable because they are being held for pending outbound flows.
         attr_reader :outbound_pending
       end
@@ -26,42 +24,34 @@ module Stripe
       class FlowDetails < Stripe::StripeObject
         # You can reverse some [ReceivedCredits](https://stripe.com/docs/api#received_credits) depending on their network and source flow. Reversing a ReceivedCredit leads to the creation of a new object known as a CreditReversal.
         attr_reader :credit_reversal
-
         # You can reverse some [ReceivedDebits](https://stripe.com/docs/api#received_debits) depending on their network and source flow. Reversing a ReceivedDebit leads to the creation of a new object known as a DebitReversal.
         attr_reader :debit_reversal
-
         # Use [InboundTransfers](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/into/inbound-transfers) to add funds to your [FinancialAccount](https://stripe.com/docs/api#financial_accounts) via a PaymentMethod that is owned by you. The funds will be transferred via an ACH debit.
         #
         # Related guide: [Moving money with Treasury using InboundTransfer objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/into/inbound-transfers)
         attr_reader :inbound_transfer
-
         # When an [issued card](https://stripe.com/docs/issuing) is used to make a purchase, an Issuing `Authorization`
         # object is created. [Authorizations](https://stripe.com/docs/issuing/purchases/authorizations) must be approved for the
         # purchase to be completed successfully.
         #
         # Related guide: [Issued card authorizations](https://stripe.com/docs/issuing/purchases/authorizations)
         attr_reader :issuing_authorization
-
         # Use [OutboundPayments](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-payments) to send funds to another party's external bank account or [FinancialAccount](https://stripe.com/docs/api#financial_accounts). To send money to an account belonging to the same user, use an [OutboundTransfer](https://stripe.com/docs/api#outbound_transfers).
         #
         # Simulate OutboundPayment state changes with the `/v1/test_helpers/treasury/outbound_payments` endpoints. These methods can only be called on test mode objects.
         #
         # Related guide: [Moving money with Treasury using OutboundPayment objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-payments)
         attr_reader :outbound_payment
-
         # Use [OutboundTransfers](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-transfers) to transfer funds from a [FinancialAccount](https://stripe.com/docs/api#financial_accounts) to a PaymentMethod belonging to the same entity. To send funds to a different party, use [OutboundPayments](https://stripe.com/docs/api#outbound_payments) instead. You can send funds over ACH rails or through a domestic wire transfer to a user's own external bank account.
         #
         # Simulate OutboundTransfer state changes with the `/v1/test_helpers/treasury/outbound_transfers` endpoints. These methods can only be called on test mode objects.
         #
         # Related guide: [Moving money with Treasury using OutboundTransfer objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-transfers)
         attr_reader :outbound_transfer
-
         # ReceivedCredits represent funds sent to a [FinancialAccount](https://stripe.com/docs/api#financial_accounts) (for example, via ACH or wire). These money movements are not initiated from the FinancialAccount.
         attr_reader :received_credit
-
         # ReceivedDebits represent funds pulled from a [FinancialAccount](https://stripe.com/docs/api#financial_accounts). These are not initiated from the FinancialAccount.
         attr_reader :received_debit
-
         # Type of the flow that created the Transaction. Set to the same value as `flow_type`.
         attr_reader :type
       end
@@ -69,7 +59,6 @@ module Stripe
       class StatusTransitions < Stripe::StripeObject
         # Timestamp describing when the Transaction changed status to `posted`.
         attr_reader :posted_at
-
         # Timestamp describing when the Transaction changed status to `void`.
         attr_reader :void_at
       end
@@ -78,13 +67,10 @@ module Stripe
         class Created < Stripe::RequestParams
           # Minimum value to filter by (exclusive)
           attr_accessor :gt
-
           # Minimum value to filter by (inclusive)
           attr_accessor :gte
-
           # Maximum value to filter by (exclusive)
           attr_accessor :lt
-
           # Maximum value to filter by (inclusive)
           attr_accessor :lte
 
@@ -100,13 +86,10 @@ module Stripe
           class PostedAt < Stripe::RequestParams
             # Minimum value to filter by (exclusive)
             attr_accessor :gt
-
             # Minimum value to filter by (inclusive)
             attr_accessor :gte
-
             # Maximum value to filter by (exclusive)
             attr_accessor :lt
-
             # Maximum value to filter by (inclusive)
             attr_accessor :lte
 
@@ -126,28 +109,20 @@ module Stripe
         end
         # Only return Transactions that were created during the given date interval.
         attr_accessor :created
-
         # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
         attr_accessor :ending_before
-
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # Returns objects associated with this FinancialAccount.
         attr_accessor :financial_account
-
         # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
         attr_accessor :limit
-
         # The results are in reverse chronological order by `created` or `posted_at`. The default is `created`.
         attr_accessor :order_by
-
         # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
         attr_accessor :starting_after
-
         # Only return Transactions that have the given status: `open`, `posted`, or `void`.
         attr_accessor :status
-
         # A filter for the `status_transitions.posted_at` timestamp. When using this filter, `status=posted` and `order_by=posted_at` must also be specified.
         attr_accessor :status_transitions
 
@@ -184,46 +159,32 @@ module Stripe
       end
       # Amount (in cents) transferred.
       attr_reader :amount
-
       # Change to a FinancialAccount's balance
       attr_reader :balance_impact
-
       # Time at which the object was created. Measured in seconds since the Unix epoch.
       attr_reader :created
-
       # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
       attr_reader :currency
-
       # An arbitrary string attached to the object. Often useful for displaying to users.
       attr_reader :description
-
       # A list of TransactionEntries that are part of this Transaction. This cannot be expanded in any list endpoints.
       attr_reader :entries
-
       # The FinancialAccount associated with this object.
       attr_reader :financial_account
-
       # ID of the flow that created the Transaction.
       attr_reader :flow
-
       # Details of the flow that created the Transaction.
       attr_reader :flow_details
-
       # Type of the flow that created the Transaction.
       attr_reader :flow_type
-
       # Unique identifier for the object.
       attr_reader :id
-
       # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
       attr_reader :livemode
-
       # String representing the object's type. Objects of the same type share the same value.
       attr_reader :object
-
       # Status of the Transaction.
       attr_reader :status
-
       # Attribute for field status_transitions
       attr_reader :status_transitions
 

data/lib/stripe/resources/treasury/transaction_entry.rb

@@ -15,10 +15,8 @@ module Stripe
       class BalanceImpact < Stripe::StripeObject
         # The change made to funds the user can spend right now.
         attr_reader :cash
-
         # The change made to funds that are not spendable yet, but will become available at a later time.
         attr_reader :inbound_pending
-
         # The change made to funds in the account, but not spendable because they are being held for pending outbound flows.
         attr_reader :outbound_pending
       end
@@ -26,42 +24,34 @@ module Stripe
       class FlowDetails < Stripe::StripeObject
         # You can reverse some [ReceivedCredits](https://stripe.com/docs/api#received_credits) depending on their network and source flow. Reversing a ReceivedCredit leads to the creation of a new object known as a CreditReversal.
         attr_reader :credit_reversal
-
         # You can reverse some [ReceivedDebits](https://stripe.com/docs/api#received_debits) depending on their network and source flow. Reversing a ReceivedDebit leads to the creation of a new object known as a DebitReversal.
         attr_reader :debit_reversal
-
         # Use [InboundTransfers](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/into/inbound-transfers) to add funds to your [FinancialAccount](https://stripe.com/docs/api#financial_accounts) via a PaymentMethod that is owned by you. The funds will be transferred via an ACH debit.
         #
         # Related guide: [Moving money with Treasury using InboundTransfer objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/into/inbound-transfers)
         attr_reader :inbound_transfer
-
         # When an [issued card](https://stripe.com/docs/issuing) is used to make a purchase, an Issuing `Authorization`
         # object is created. [Authorizations](https://stripe.com/docs/issuing/purchases/authorizations) must be approved for the
         # purchase to be completed successfully.
         #
         # Related guide: [Issued card authorizations](https://stripe.com/docs/issuing/purchases/authorizations)
         attr_reader :issuing_authorization
-
         # Use [OutboundPayments](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-payments) to send funds to another party's external bank account or [FinancialAccount](https://stripe.com/docs/api#financial_accounts). To send money to an account belonging to the same user, use an [OutboundTransfer](https://stripe.com/docs/api#outbound_transfers).
         #
         # Simulate OutboundPayment state changes with the `/v1/test_helpers/treasury/outbound_payments` endpoints. These methods can only be called on test mode objects.
         #
         # Related guide: [Moving money with Treasury using OutboundPayment objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-payments)
         attr_reader :outbound_payment
-
         # Use [OutboundTransfers](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-transfers) to transfer funds from a [FinancialAccount](https://stripe.com/docs/api#financial_accounts) to a PaymentMethod belonging to the same entity. To send funds to a different party, use [OutboundPayments](https://stripe.com/docs/api#outbound_payments) instead. You can send funds over ACH rails or through a domestic wire transfer to a user's own external bank account.
         #
         # Simulate OutboundTransfer state changes with the `/v1/test_helpers/treasury/outbound_transfers` endpoints. These methods can only be called on test mode objects.
         #
         # Related guide: [Moving money with Treasury using OutboundTransfer objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-transfers)
         attr_reader :outbound_transfer
-
         # ReceivedCredits represent funds sent to a [FinancialAccount](https://stripe.com/docs/api#financial_accounts) (for example, via ACH or wire). These money movements are not initiated from the FinancialAccount.
         attr_reader :received_credit
-
         # ReceivedDebits represent funds pulled from a [FinancialAccount](https://stripe.com/docs/api#financial_accounts). These are not initiated from the FinancialAccount.
         attr_reader :received_debit
-
         # Type of the flow that created the Transaction. Set to the same value as `flow_type`.
         attr_reader :type
       end
@@ -70,13 +60,10 @@ module Stripe
         class Created < Stripe::RequestParams
           # Minimum value to filter by (exclusive)
           attr_accessor :gt
-
           # Minimum value to filter by (inclusive)
           attr_accessor :gte
-
           # Maximum value to filter by (exclusive)
           attr_accessor :lt
-
           # Maximum value to filter by (inclusive)
           attr_accessor :lte
 
@@ -91,13 +78,10 @@ module Stripe
         class EffectiveAt < Stripe::RequestParams
           # Minimum value to filter by (exclusive)
           attr_accessor :gt
-
           # Minimum value to filter by (inclusive)
           attr_accessor :gte
-
           # Maximum value to filter by (exclusive)
           attr_accessor :lt
-
           # Maximum value to filter by (inclusive)
           attr_accessor :lte
 
@@ -110,28 +94,20 @@ module Stripe
         end
         # Only return TransactionEntries that were created during the given date interval.
         attr_accessor :created
-
         # Attribute for param field effective_at
         attr_accessor :effective_at
-
         # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
         attr_accessor :ending_before
-
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # Returns objects associated with this FinancialAccount.
         attr_accessor :financial_account
-
         # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
         attr_accessor :limit
-
         # The results are in reverse chronological order by `created` or `effective_at`. The default is `created`.
         attr_accessor :order_by
-
         # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
         attr_accessor :starting_after
-
         # Only return TransactionEntries associated with this Transaction.
         attr_accessor :transaction
 
@@ -168,40 +144,28 @@ module Stripe
       end
       # Change to a FinancialAccount's balance
       attr_reader :balance_impact
-
       # Time at which the object was created. Measured in seconds since the Unix epoch.
       attr_reader :created
-
       # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
       attr_reader :currency
-
       # When the TransactionEntry will impact the FinancialAccount's balance.
       attr_reader :effective_at
-
       # The FinancialAccount associated with this object.
       attr_reader :financial_account
-
       # Token of the flow associated with the TransactionEntry.
       attr_reader :flow
-
       # Details of the flow associated with the TransactionEntry.
       attr_reader :flow_details
-
       # Type of the flow associated with the TransactionEntry.
       attr_reader :flow_type
-
       # Unique identifier for the object.
       attr_reader :id
-
       # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
       attr_reader :livemode
-
       # String representing the object's type. Objects of the same type share the same value.
       attr_reader :object
-
       # The Transaction associated with this object.
       attr_reader :transaction
-
       # The specific money movement that generated the TransactionEntry.
       attr_reader :type
 

data/lib/stripe/resources/usage_record.rb

@@ -16,19 +16,14 @@ module Stripe
 
     # Unique identifier for the object.
     attr_reader :id
-
     # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
     attr_reader :livemode
-
     # String representing the object's type. Objects of the same type share the same value.
     attr_reader :object
-
     # The usage quantity for the specified date.
     attr_reader :quantity
-
     # The ID of the subscription item this usage record contains data for.
     attr_reader :subscription_item
-
     # The timestamp when this usage occurred.
     attr_reader :timestamp
   end

data/lib/stripe/resources/usage_record_summary.rb

@@ -12,28 +12,21 @@ module Stripe
     class Period < Stripe::StripeObject
       # The end date of this usage period. All usage up to and including this point in time is included.
       attr_reader :end
-
       # The start date of this usage period. All usage after this point in time is included.
       attr_reader :start
     end
     # Unique identifier for the object.
     attr_reader :id
-
     # The invoice in which this usage period has been billed for.
     attr_reader :invoice
-
     # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
     attr_reader :livemode
-
     # String representing the object's type. Objects of the same type share the same value.
     attr_reader :object
-
     # Attribute for field period
     attr_reader :period
-
     # The ID of the subscription item this summary is describing.
     attr_reader :subscription_item
-
     # The total usage within this usage period.
     attr_reader :total_usage
   end

data/lib/stripe/resources/v2/billing/meter_event.rb

@@ -13,24 +13,18 @@ module Stripe
 
         # The creation time of this meter event.
         attr_reader :created
-
         # The name of the meter event. Corresponds with the `event_name` field on a meter.
         attr_reader :event_name
-
         # A unique identifier for the event. If not provided, one will be generated. We recommend using a globally unique identifier for this. We’ll enforce uniqueness within a rolling 24 hour period.
         attr_reader :identifier
-
         # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
         attr_reader :livemode
-
         # String representing the object's type. Objects of the same type share the same value of the object field.
         attr_reader :object
-
         # The payload of the event. This must contain the fields corresponding to a meter’s
         # `customer_mapping.event_payload_key` (default is `stripe_customer_id`) and
         # `value_settings.event_payload_key` (default is `value`). Read more about the payload.
         attr_reader :payload
-
         # The time of the event. Must be within the past 35 calendar days or up to
         # 5 minutes in the future. Defaults to current timestamp if not specified.
         attr_reader :timestamp

data/lib/stripe/resources/v2/billing/meter_event_adjustment.rb

@@ -16,25 +16,18 @@ module Stripe
         end
         # Specifies which event to cancel.
         attr_reader :cancel
-
         # The time the adjustment was created.
         attr_reader :created
-
         # The name of the meter event. Corresponds with the `event_name` field on a meter.
         attr_reader :event_name
-
         # The unique id of this meter event adjustment.
         attr_reader :id
-
         # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
         attr_reader :livemode
-
         # String representing the object's type. Objects of the same type share the same value of the object field.
         attr_reader :object
-
         # Open Enum. The meter event adjustment’s status.
         attr_reader :status
-
         # Open Enum. Specifies whether to cancel a single event or a range of events for a time period. Time period cancellation is not supported yet.
         attr_reader :type
       end

data/lib/stripe/resources/v2/billing/meter_event_session.rb

@@ -13,19 +13,14 @@ module Stripe
         # The authentication token for this session.  Use this token when calling the
         # high-throughput meter event API.
         attr_reader :authentication_token
-
         # The creation time of this session.
         attr_reader :created
-
         # The time at which this session will expire.
         attr_reader :expires_at
-
         # The unique id of this auth session.
         attr_reader :id
-
         # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
         attr_reader :livemode
-
         # String representing the object's type. Objects of the same type share the same value of the object field.
         attr_reader :object
       end