ruby-ogre 0.0.1-x86-linux

data/deps/include/OGRE/OgreEntity.h

@@ -0,0 +1,866 @@
+/*
+-----------------------------------------------------------------------------
+This source file is part of OGRE
+(Object-oriented Graphics Rendering Engine)
+For the latest info, see http://www.ogre3d.org
+
+Copyright (c) 2000-2012 Torus Knot Software Ltd
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+-----------------------------------------------------------------------------
+*/
+#ifndef __Entity_H__
+#define __Entity_H__
+
+#include "OgrePrerequisites.h"
+#include "OgreCommon.h"
+
+#include "OgreString.h"
+#include "OgreMovableObject.h"
+#include "OgreQuaternion.h"
+#include "OgreVector3.h"
+#include "OgreHardwareBufferManager.h"
+#include "OgreMesh.h"
+#include "OgreRenderable.h"
+#include "OgreResourceGroupManager.h"
+
+namespace Ogre {
+	/** \addtogroup Core
+	*  @{
+	*/
+	/** \addtogroup Scene
+	*  @{
+	*/
+	/** Defines an instance of a discrete, movable object based on a Mesh.
+	@remarks
+	Ogre generally divides renderable objects into 2 groups, discrete
+	(separate) and relatively small objects which move around the world,
+	and large, sprawling geometry which makes up generally immovable
+	scenery, aka 'level geometry'.
+	@par
+	The Mesh and SubMesh classes deal with the definition of the geometry
+	used by discrete movable objects. Entities are actual instances of
+	objects based on this geometry in the world. Therefore there is
+	usually a single set Mesh for a car, but there may be multiple
+	entities based on it in the world. Entities are able to override
+	aspects of the Mesh it is defined by, such as changing material
+	properties per instance (so you can have many cars using the same
+	geometry but different textures for example). Because a Mesh is split
+	into SubMeshes for this purpose, the Entity class is a grouping class
+	(much like the Mesh class) and much of the detail regarding
+	individual changes is kept in the SubEntity class. There is a 1:1
+	relationship between SubEntity instances and the SubMesh instances
+	associated with the Mesh the Entity is based on.
+	@par
+	Entity and SubEntity classes are never created directly. Use the
+	createEntity method of the SceneManager (passing a model name) to
+	create one.
+	@par
+	Entities are included in the scene by associating them with a
+	SceneNode, using the attachEntity method. See the SceneNode class
+	for full information.
+	@note
+	No functions were declared virtual to improve performance.
+	*/
+	class _OgreExport Entity: public MovableObject, public Resource::Listener
+	{
+		// Allow EntityFactory full access
+		friend class EntityFactory;
+		friend class SubEntity;
+	public:
+		
+		typedef set<Entity*>::type EntitySet;
+		typedef map<unsigned short, bool>::type SchemeHardwareAnimMap;
+
+	protected:
+
+		/** Private constructor (instances cannot be created directly).
+		*/
+		Entity();
+		/** Private constructor - specify name (the usual constructor used).
+		*/
+		Entity( const String& name, const MeshPtr& mesh);
+
+		/** The Mesh that this Entity is based on.
+		*/
+		MeshPtr mMesh;
+
+		/** List of SubEntities (point to SubMeshes).
+		*/
+		typedef vector<SubEntity*>::type SubEntityList;
+		SubEntityList mSubEntityList;
+
+
+		/// State of animation for animable meshes
+		AnimationStateSet* mAnimationState;
+
+
+		/// Temp buffer details for software skeletal anim of shared geometry
+		TempBlendedBufferInfo mTempSkelAnimInfo;
+		/// Vertex data details for software skeletal anim of shared geometry
+		VertexData* mSkelAnimVertexData;
+		/// Temp buffer details for software vertex anim of shared geometry
+		TempBlendedBufferInfo mTempVertexAnimInfo;
+		/// Vertex data details for software vertex anim of shared geometry
+		VertexData* mSoftwareVertexAnimVertexData;
+		/// Vertex data details for hardware vertex anim of shared geometry
+		/// - separate since we need to s/w anim for shadows whilst still altering
+		///   the vertex data for hardware morphing (pos2 binding)
+		VertexData* mHardwareVertexAnimVertexData;
+		/// Have we applied any vertex animation to shared geometry?
+		bool mVertexAnimationAppliedThisFrame;
+        /// Have the temp buffers already had their geometry prepared for use in rendering shadow volumes?
+        bool mPreparedForShadowVolumes;
+
+		/** Internal method - given vertex data which could be from the Mesh or
+		any submesh, finds the temporary blend copy. */
+		const VertexData* findBlendedVertexData(const VertexData* orig);
+		/** Internal method - given vertex data which could be from the Mesh or
+		any SubMesh, finds the corresponding SubEntity. */
+		SubEntity* findSubEntityForVertexData(const VertexData* orig);
+
+		/** Internal method for extracting metadata out of source vertex data
+		for fast assignment of temporary buffers later. */
+		void extractTempBufferInfo(VertexData* sourceData, TempBlendedBufferInfo* info);
+		/** Internal method to clone vertex data definitions but to remove blend buffers. */
+		VertexData* cloneVertexDataRemoveBlendInfo(const VertexData* source);
+		/** Internal method for preparing this Entity for use in animation. */
+		void prepareTempBlendBuffers(void);
+		/** Mark all vertex data as so far unanimated.
+		*/
+		void markBuffersUnusedForAnimation(void);
+		/** Internal method to restore original vertex data where we didn't
+			perform any vertex animation this frame.
+		*/
+		void restoreBuffersForUnusedAnimation(bool hardwareAnimation);
+
+		/** Ensure that any unbound  pose animation buffers are bound to a safe
+			default.
+			@param srcData Original vertex data containing original positions
+			@param destData Hardware animation vertex data to be checked
+		*/
+		void bindMissingHardwarePoseBuffers(const VertexData* srcData, 
+			VertexData* destData);
+			
+		/** When performing software pose animation, initialise software copy
+			of vertex data
+		*/
+		void initialisePoseVertexData(const VertexData* srcData, VertexData* destData, 
+			bool animateNormals);
+
+		/** When animating normals for pose animation, finalise normals by filling in
+			with the reference mesh normal where applied normal weights < 1
+		*/
+		void finalisePoseNormals(const VertexData* srcData, VertexData* destData);
+
+		/// Cached bone matrices, including any world transform
+        Matrix4 *mBoneWorldMatrices;
+        /// Cached bone matrices in skeleton local space, might shares with other entity instances.
+		Matrix4 *mBoneMatrices;
+		unsigned short mNumBoneMatrices;
+		/// Records the last frame in which animation was updated
+		unsigned long mFrameAnimationLastUpdated;
+
+		/// Perform all the updates required for an animated entity
+		void updateAnimation(void);
+
+		/// Records the last frame in which the bones was updated
+		/// It's a pointer because it can be shared between different entities with
+		/// a shared skeleton.
+		unsigned long *mFrameBonesLastUpdated;
+
+		/**
+		* A set of all the entities which shares a single SkeletonInstance.
+		* This is only created if the entity is in fact sharing it's SkeletonInstance with
+		* other Entities.
+		*/
+		EntitySet* mSharedSkeletonEntities;
+
+		/** 
+		* Private method to cache bone matrices from skeleton
+		*
+		* @return True if the bone matrices cache has been updated. False if note
+		*/
+		bool cacheBoneMatrices(void);
+
+		/// Flag determines whether or not to display skeleton
+		bool mDisplaySkeleton;
+		/** 
+		* Flag indicating whether hardware animation is supported by this entities materials
+		* data is saved per scehme number
+		*/
+		SchemeHardwareAnimMap mSchemeHardwareAnim;
+
+		/// Current state of the hardware animation as represented by the entities parameters
+		bool mCurrentHWAnimationState;
+
+		/// Number of hardware poses supported by materials
+		ushort mHardwarePoseCount;
+		/// Flag indicating whether we have a vertex program in use on any of our subentities
+		bool mVertexProgramInUse;
+        /// Counter indicating number of requests for software animation.
+        int mSoftwareAnimationRequests;
+        /// Counter indicating number of requests for software blended normals.
+        int mSoftwareAnimationNormalsRequests;
+		/// Flag indicating whether to skip automatic updating of the Skeleton's AnimationState
+		bool mSkipAnimStateUpdates;
+		/// Flag indicating whether to update the main entity skeleton even when an LOD is displayed
+		bool mAlwaysUpdateMainSkeleton;
+
+
+		/// The LOD number of the mesh to use, calculated by _notifyCurrentCamera
+		ushort mMeshLodIndex;
+
+		/// LOD bias factor, transformed for optimisation when calculating adjusted lod value
+		Real mMeshLodFactorTransformed;
+		/// Index of minimum detail LOD (NB higher index is lower detail)
+		ushort mMinMeshLodIndex;
+		/// Index of maximum detail LOD (NB lower index is higher detail)
+		ushort mMaxMeshLodIndex;
+
+        /// LOD bias factor, not transformed
+        Real mMaterialLodFactor;
+		/// LOD bias factor, transformed for optimisation when calculating adjusted lod value
+		Real mMaterialLodFactorTransformed;
+		/// Index of minimum detail LOD (NB higher index is lower detail)
+		ushort mMinMaterialLodIndex;
+		/// Index of maximum detail LOD (NB lower index is higher detail)
+		ushort mMaxMaterialLodIndex;
+
+		/** List of LOD Entity instances (for manual LODs).
+		We don't know when the mesh is using manual LODs whether one LOD to the next will have the
+		same number of SubMeshes, therefore we have to allow a separate Entity list
+		with each alternate one.
+		*/
+		typedef vector<Entity*>::type LODEntityList;
+		LODEntityList mLodEntityList;
+
+		/** This Entity's personal copy of the skeleton, if skeletally animated
+		*/
+		SkeletonInstance* mSkeletonInstance;
+
+		/// Has this entity been initialised yet?
+		bool mInitialised;
+
+		/// Last parent transform
+		Matrix4 mLastParentXform;
+
+		/// Mesh state count, used to detect differences
+		size_t mMeshStateCount;
+
+		/** Builds a list of SubEntities based on the SubMeshes contained in the Mesh. */
+		void buildSubEntityList(MeshPtr& mesh, SubEntityList* sublist);
+
+		/// internal implementation of attaching a 'child' object to this entity and assign the parent node to the child entity
+		void attachObjectImpl(MovableObject *pMovable, TagPoint *pAttachingPoint);
+
+		/// internal implementation of detaching a 'child' object of this entity and clear the parent node of the child entity
+		void detachObjectImpl(MovableObject* pObject);
+
+		/// internal implementation of detaching all 'child' objects of this entity
+		void detachAllObjectsImpl(void);
+
+		/// ensures reevaluation of the vertex processing usage
+		void reevaluateVertexProcessing(void);
+
+		/** calculates the kind of vertex processing in use
+		@remarks
+		This function's return value is calculated according to the current 
+		active scheme. This is due to the fact that RTSS schemes may be different
+		in their handling of hardware animation.
+		*/
+		bool calcVertexProcessing(void);
+	
+		/// Apply vertex animation
+		void applyVertexAnimation(bool hardwareAnimation, bool stencilShadows);
+		/// Initialise the hardware animation elements for given vertex data
+		ushort initHardwareAnimationElements(VertexData* vdata,
+			ushort numberOfElements, bool animateNormals);
+		/// Are software vertex animation temp buffers bound?
+		bool tempVertexAnimBuffersBound(void) const;
+        /// Are software skeleton animation temp buffers bound?
+        bool tempSkelAnimBuffersBound(bool requestNormals) const;
+
+	public:
+		/// Contains the child objects (attached to bones) indexed by name
+		typedef map<String, MovableObject*>::type ChildObjectList;
+	protected:
+		ChildObjectList mChildObjectList;
+
+
+		/// Bounding box that 'contains' all the mesh of each child entity
+		mutable AxisAlignedBox mFullBoundingBox;
+
+		ShadowRenderableList mShadowRenderables;
+
+		/** Nested class to allow entity shadows. */
+		class _OgreExport EntityShadowRenderable : public ShadowRenderable
+		{
+		protected:
+			Entity* mParent;
+			/// Shared link to position buffer
+			HardwareVertexBufferSharedPtr mPositionBuffer;
+			/// Shared link to w-coord buffer (optional)
+			HardwareVertexBufferSharedPtr mWBuffer;
+			/// Link to current vertex data used to bind (maybe changes)
+			const VertexData* mCurrentVertexData;
+			/// Original position buffer source binding
+			unsigned short mOriginalPosBufferBinding;
+			/// Link to SubEntity, only present if SubEntity has it's own geometry
+			SubEntity* mSubEntity;
+
+
+		public:
+			EntityShadowRenderable(Entity* parent,
+				HardwareIndexBufferSharedPtr* indexBuffer, const VertexData* vertexData,
+				bool createSeparateLightCap, SubEntity* subent, bool isLightCap = false);
+			~EntityShadowRenderable();
+			
+			/// Create the separate light cap if it doesn't already exists
+			void _createSeparateLightCap();
+			/// Overridden from ShadowRenderable
+			void getWorldTransforms(Matrix4* xform) const;
+			HardwareVertexBufferSharedPtr getPositionBuffer(void) { return mPositionBuffer; }
+			HardwareVertexBufferSharedPtr getWBuffer(void) { return mWBuffer; }
+			/// Rebind the source positions (for temp buffer users)
+			void rebindPositionBuffer(const VertexData* vertexData, bool force);
+			/// Overridden from ShadowRenderable
+			bool isVisible(void) const;
+			/// Overridden from ShadowRenderable
+			virtual void rebindIndexBuffer(const HardwareIndexBufferSharedPtr& indexBuffer);
+		};
+	public:
+		/** Default destructor.
+		*/
+		~Entity();
+
+		/** Gets the Mesh that this Entity is based on.
+		*/
+		const MeshPtr& getMesh(void) const;
+
+		/** Gets a pointer to a SubEntity, ie a part of an Entity.
+		*/
+		SubEntity* getSubEntity(unsigned int index) const;
+
+		/** Gets a pointer to a SubEntity by name
+		@remarks - names should be initialized during a Mesh creation.
+		*/
+		SubEntity* getSubEntity( const String& name ) const;
+
+		/** Retrieves the number of SubEntity objects making up this entity.
+		*/
+		unsigned int getNumSubEntities(void) const;
+
+		/** Clones this entity and returns a pointer to the clone.
+		@remarks
+		Useful method for duplicating an entity. The new entity must be
+		given a unique name, and is not attached to the scene in any way
+		so must be attached to a SceneNode to be visible (exactly as
+		entities returned from SceneManager::createEntity).
+		@param
+		newName Name for the new entity.
+		*/
+		Entity* clone( const String& newName ) const;
+
+		/** Sets the material to use for the whole of this entity.
+		@remarks
+		This is a shortcut method to set all the materials for all
+		subentities of this entity. Only use this method is you want to
+		set the same material for all subentities or if you know there
+		is only one. Otherwise call getSubEntity() and call the same
+		method on the individual SubEntity.
+		*/
+		void setMaterialName( const String& name, const String& groupName = ResourceGroupManager::AUTODETECT_RESOURCE_GROUP_NAME );
+
+		
+		/** Sets the material to use for the whole of this entity.
+			@remarks
+				This is a shortcut method to set all the materials for all
+				subentities of this entity. Only use this method is you want to
+				set the same material for all subentities or if you know there
+				is only one. Otherwise call getSubEntity() and call the same
+				method on the individual SubEntity.
+		*/
+		void setMaterial(const MaterialPtr& material);
+
+		/** Overridden - see MovableObject.
+		*/
+		void _notifyCurrentCamera(Camera* cam);
+
+		/// Overridden - see MovableObject.
+		void setRenderQueueGroup(uint8 queueID);
+
+		/// Overridden - see MovableObject.
+		void setRenderQueueGroupAndPriority(uint8 queueID, ushort priority);
+
+		/** Overridden - see MovableObject.
+		*/
+		const AxisAlignedBox& getBoundingBox(void) const;
+
+		/// merge all the child object Bounds a return it
+		AxisAlignedBox getChildObjectsBoundingBox(void) const;
+
+		/** Overridden - see MovableObject.
+		*/
+		void _updateRenderQueue(RenderQueue* queue);
+
+		/** Overridden from MovableObject */
+		const String& getMovableType(void) const;
+
+		/** For entities based on animated meshes, gets the AnimationState object for a single animation.
+		@remarks
+		You animate an entity by updating the animation state objects. Each of these represents the
+		current state of each animation available to the entity. The AnimationState objects are
+		initialised from the Mesh object.
+		*/
+		AnimationState* getAnimationState(const String& name) const;
+        /** Returns whether the AnimationState with the given name exists. */
+        bool hasAnimationState(const String& name) const;
+		/** For entities based on animated meshes, gets the AnimationState objects for all animations.
+		@return
+		In case the entity is animated, this functions returns the pointer to a AnimationStateSet
+		containing all animations of the entries. If the entity is not animated, it returns 0.
+		@remarks
+		You animate an entity by updating the animation state objects. Each of these represents the
+		current state of each animation available to the entity. The AnimationState objects are
+		initialised from the Mesh object.
+		*/
+		AnimationStateSet* getAllAnimationStates(void) const;
+
+		/** Tells the Entity whether or not it should display it's skeleton, if it has one.
+		*/
+		void setDisplaySkeleton(bool display);
+
+		/** Returns whether or not the entity is currently displaying its skeleton.
+		*/
+		bool getDisplaySkeleton(void) const;
+
+
+        /** Gets a pointer to the entity representing the numbered manual level of detail.
+        @remarks
+            The zero-based index never includes the original entity, unlike
+			Mesh::getLodLevel.
+        */
+        Entity* getManualLodLevel(size_t index) const;
+
+        /** Returns the number of manual levels of detail that this entity supports.
+        @remarks
+            This number never includes the original entity, it is difference
+            with Mesh::getNumLodLevels.
+        */
+        size_t getNumManualLodLevels(void) const;
+
+		/** Returns the current LOD used to render
+		*/
+		ushort getCurrentLodIndex() { return mMeshLodIndex; }
+
+		/** Sets a level-of-detail bias for the mesh detail of this entity.
+		@remarks
+		Level of detail reduction is normally applied automatically based on the Mesh
+		settings. However, it is possible to influence this behaviour for this entity
+		by adjusting the LOD bias. This 'nudges' the mesh level of detail used for this
+		entity up or down depending on your requirements. You might want to use this
+		if there was a particularly important entity in your scene which you wanted to
+		detail better than the others, such as a player model.
+		@par
+		There are three parameters to this method; the first is a factor to apply; it
+		defaults to 1.0 (no change), by increasing this to say 2.0, this model would
+		take twice as long to reduce in detail, whilst at 0.5 this entity would use lower
+		detail versions twice as quickly. The other 2 parameters are hard limits which
+		let you set the maximum and minimum level-of-detail version to use, after all
+		other calculations have been made. This lets you say that this entity should
+		never be simplified, or that it can only use LODs below a certain level even
+		when right next to the camera.
+		@param factor Proportional factor to apply to the distance at which LOD is changed.
+		Higher values increase the distance at which higher LODs are displayed (2.0 is
+		twice the normal distance, 0.5 is half).
+		@param maxDetailIndex The index of the maximum LOD this entity is allowed to use (lower
+		indexes are higher detail: index 0 is the original full detail model).
+		@param minDetailIndex The index of the minimum LOD this entity is allowed to use (higher
+		indexes are lower detail). Use something like 99 if you want unlimited LODs (the actual
+		LOD will be limited by the number in the Mesh)
+		*/
+		void setMeshLodBias(Real factor, ushort maxDetailIndex = 0, ushort minDetailIndex = 99);
+
+		/** Sets a level-of-detail bias for the material detail of this entity.
+		@remarks
+		Level of detail reduction is normally applied automatically based on the Material
+		settings. However, it is possible to influence this behaviour for this entity
+		by adjusting the LOD bias. This 'nudges' the material level of detail used for this
+		entity up or down depending on your requirements. You might want to use this
+		if there was a particularly important entity in your scene which you wanted to
+		detail better than the others, such as a player model.
+		@par
+		There are three parameters to this method; the first is a factor to apply; it
+		defaults to 1.0 (no change), by increasing this to say 2.0, this entity would
+		take twice as long to use a lower detail material, whilst at 0.5 this entity
+		would use lower detail versions twice as quickly. The other 2 parameters are
+		hard limits which let you set the maximum and minimum level-of-detail index
+		to use, after all other calculations have been made. This lets you say that
+		this entity should never be simplified, or that it can only use LODs below
+		a certain level even when right next to the camera.
+		@param factor Proportional factor to apply to the distance at which LOD is changed.
+		Higher values increase the distance at which higher LODs are displayed (2.0 is
+		twice the normal distance, 0.5 is half).
+		@param maxDetailIndex The index of the maximum LOD this entity is allowed to use (lower
+		indexes are higher detail: index 0 is the original full detail model).
+		@param minDetailIndex The index of the minimum LOD this entity is allowed to use (higher
+		indexes are lower detail. Use something like 99 if you want unlimited LODs (the actual
+		LOD will be limited by the number of lod indexes used in the Material)
+		*/
+		void setMaterialLodBias(Real factor, ushort maxDetailIndex = 0, ushort minDetailIndex = 99);
+
+		/** Sets whether the polygon mode of this entire entity may be
+		overridden by the camera detail settings.
+		*/
+		void setPolygonModeOverrideable(bool PolygonModeOverrideable);
+		/** Attaches another object to a certain bone of the skeleton which this entity uses.
+		@remarks
+		This method can be used to attach another object to an animated part of this entity,
+		by attaching it to a bone in the skeleton (with an offset if required). As this entity
+		is animated, the attached object will move relative to the bone to which it is attached.
+		@par
+		An exception is thrown if the movable object is already attached to the bone, another bone or scenenode.
+		If the entity has no skeleton or the bone name cannot be found then an exception is thrown.
+		@param boneName The name of the bone (in the skeleton) to attach this object
+		@param pMovable Pointer to the object to attach
+		@param offsetOrientation An adjustment to the orientation of the attached object, relative to the bone.
+		@param offsetPosition An adjustment to the position of the attached object, relative to the bone.
+		@return The TagPoint to which the object has been attached
+		*/
+		TagPoint* attachObjectToBone(const String &boneName,
+			MovableObject *pMovable,
+			const Quaternion &offsetOrientation = Quaternion::IDENTITY,
+			const Vector3 &offsetPosition = Vector3::ZERO);
+
+		/** Detach a MovableObject previously attached using attachObjectToBone.
+            If the movable object name is not found then an exception is raised.
+        @param movableName is the name of the movable object to be detached.
+		*/
+		MovableObject* detachObjectFromBone(const String &movableName);
+
+		/** Detaches an object by pointer.
+		@remarks
+		Use this method to destroy a MovableObject which is attached to a bone of belonging this entity.
+		But sometimes the object may be not in the child object list because it is a lod entity,
+		this method can safely detect and ignore in this case and won't raise an exception.
+		*/
+		void detachObjectFromBone(MovableObject* obj);
+
+		/// Detach all MovableObjects previously attached using attachObjectToBone
+		void detachAllObjectsFromBone(void);
+
+		typedef MapIterator<ChildObjectList> ChildObjectListIterator;
+		/** Gets an iterator to the list of objects attached to bones on this entity. */
+		ChildObjectListIterator getAttachedObjectIterator(void);
+		/** @see MovableObject::getBoundingRadius */
+		Real getBoundingRadius(void) const;
+
+		/** @copy MovableObject::getWorldBoundingBox */
+		const AxisAlignedBox& getWorldBoundingBox(bool derive = false) const;
+		/** @copy MovableObject::getWorldBoundingSphere */
+		const Sphere& getWorldBoundingSphere(bool derive = false) const;
+
+        /** Overridden member from ShadowCaster. */
+        EdgeData* getEdgeList(void);
+		/** Overridden member from ShadowCaster. */
+		bool hasEdgeList(void);
+        /** Overridden member from ShadowCaster. */
+        ShadowRenderableListIterator getShadowVolumeRenderableIterator(
+            ShadowTechnique shadowTechnique, const Light* light,
+            HardwareIndexBufferSharedPtr* indexBuffer,
+            bool extrudeVertices, Real extrusionDistance, unsigned long flags = 0 );
+
+		/** Internal method for retrieving bone matrix information. */
+		const Matrix4* _getBoneMatrices(void) const { return mBoneMatrices;}
+		/** Internal method for retrieving bone matrix information. */
+		unsigned short _getNumBoneMatrices(void) const { return mNumBoneMatrices; }
+		/** Returns whether or not this entity is skeletally animated. */
+		bool hasSkeleton(void) const { return mSkeletonInstance != 0; }
+		/** Get this Entity's personal skeleton instance. */
+		SkeletonInstance* getSkeleton(void) const { return mSkeletonInstance; }
+		/** Returns whether or not hardware animation is enabled.
+		@remarks
+		Because fixed-function indexed vertex blending is rarely supported
+		by existing graphics cards, hardware animation can only be done if
+		the vertex programs in the materials used to render an entity support
+		it. Therefore, this method will only return true if all the materials
+		assigned to this entity have vertex programs assigned, and all those
+		vertex programs must support 'includes_morph_animation true' if using
+        morph animation, 'includes_pose_animation true' if using pose animation
+        and 'includes_skeletal_animation true' if using skeletal animation.
+
+		Also note the the function returns value according to the current active
+		scheme. This is due to the fact that RTSS schemes may be different in their
+		handling of hardware animation.
+		*/
+		bool isHardwareAnimationEnabled(void);
+
+		/** Overridden from MovableObject */
+		void _notifyAttached(Node* parent, bool isTagPoint = false);
+        /** Returns the number of requests that have been made for software animation
+        @remarks
+            If non-zero then software animation will be performed in updateAnimation
+            regardless of the current setting of isHardwareAnimationEnabled or any
+            internal optimise for eliminate software animation. Requests for software
+            animation are made by calling the addSoftwareAnimationRequest() method.
+        */
+        int getSoftwareAnimationRequests(void) const { return mSoftwareAnimationRequests; }
+        /** Returns the number of requests that have been made for software animation of normals
+        @remarks
+            If non-zero, and getSoftwareAnimationRequests() also returns non-zero,
+            then software animation of normals will be performed in updateAnimation
+            regardless of the current setting of isHardwareAnimationEnabled or any
+            internal optimise for eliminate software animation. Currently it is not
+            possible to force software animation of only normals. Consequently this
+            value is always less than or equal to that returned by getSoftwareAnimationRequests().
+            Requests for software animation of normals are made by calling the
+            addSoftwareAnimationRequest() method with 'true' as the parameter.
+        */
+        int getSoftwareAnimationNormalsRequests(void) const { return mSoftwareAnimationNormalsRequests; }
+        /** Add a request for software animation
+        @remarks
+            Tells the entity to perform animation calculations for skeletal/vertex
+            animations in software, regardless of the current setting of
+            isHardwareAnimationEnabled().  Software animation will be performed
+            any time one or more requests have been made.  If 'normalsAlso' is
+            'true', then the entity will also do software blending on normal
+            vectors, in addition to positions. This advanced method useful for
+            situations in which access to actual mesh vertices is required,
+            such as accurate collision detection or certain advanced shading
+            techniques. When software animation is no longer needed,
+            the caller of this method should always remove the request by calling
+            removeSoftwareAnimationRequest(), passing the same value for
+            'normalsAlso'.
+        */
+        void addSoftwareAnimationRequest(bool normalsAlso);
+        /** Removes a request for software animation
+        @remarks
+            Calling this decrements the entity's internal counter of the number
+            of requests for software animation.  If the counter is already zero
+            then calling this method throws an exception.  The 'normalsAlso'
+            flag if set to 'true' will also decrement the internal counter of
+            number of requests for software animation of normals.
+        */
+        void removeSoftwareAnimationRequest(bool normalsAlso);
+
+		/** Shares the SkeletonInstance with the supplied entity.
+		*   Note that in order for this to work, both entities must have the same
+		*   Skeleton.
+		*/
+		void shareSkeletonInstanceWith(Entity* entity);
+
+		/** Returns whether or not this entity is either morph or pose animated.
+		*/
+		bool hasVertexAnimation(void) const;
+
+
+		/** Stops sharing the SkeletonInstance with other entities.
+		*/
+		void stopSharingSkeletonInstance();
+
+
+		/**
+		* Returns whether this entity shares it's SkeltonInstance with other entity instances.
+		*/
+		inline bool sharesSkeletonInstance() const { return mSharedSkeletonEntities != NULL; }
+
+		/**
+		* Returns a pointer to the set of entities which share a SkeletonInstance.
+		* If this instance does not share it's SkeletonInstance with other instances NULL will be returned
+		*/
+		inline const EntitySet* getSkeletonInstanceSharingSet() const { return mSharedSkeletonEntities; }
+
+		/** Updates the internal animation state set to include the latest
+		available animations from the attached skeleton.
+		@remarks
+		Use this method if you manually add animations to a skeleton, or have
+		linked the skeleton to another for animation purposes since creating
+		this entity.
+		@note
+		If you have called getAnimationState prior to calling this method,
+		the pointers will still remain valid.
+		*/
+		void refreshAvailableAnimationState(void);
+
+		/** Advanced method to perform all the updates required for an animated entity.
+		@remarks
+		You don't normally need to call this, but it's here in case you wish
+		to manually update the animation of an Entity at a specific point in
+		time. Animation will not be updated more than once a frame no matter
+		how many times you call this method.
+		*/
+		void _updateAnimation(void);
+
+        /** Tests if any animation applied to this entity.
+        @remarks
+            An entity is animated if any animation state is enabled, or any manual bone
+            applied to the skeleton.
+        */
+        bool _isAnimated(void) const;
+
+        /** Tests if skeleton was animated.
+        */
+        bool _isSkeletonAnimated(void) const;
+
+		/** Advanced method to get the temporarily blended skeletal vertex information
+		for entities which are software skinned.
+        @remarks
+            Internal engine will eliminate software animation if possible, this
+            information is unreliable unless added request for software animation
+            via addSoftwareAnimationRequest.
+        @note
+            The positions/normals of the returned vertex data is in object space.
+		*/
+		VertexData* _getSkelAnimVertexData(void) const;
+		/** Advanced method to get the temporarily blended software vertex animation information
+        @remarks
+            Internal engine will eliminate software animation if possible, this
+            information is unreliable unless added request for software animation
+            via addSoftwareAnimationRequest.
+        @note
+            The positions/normals of the returned vertex data is in object space.
+		*/
+		VertexData* _getSoftwareVertexAnimVertexData(void) const;
+		/** Advanced method to get the hardware morph vertex information
+        @note
+            The positions/normals of the returned vertex data is in object space.
+		*/
+		VertexData* _getHardwareVertexAnimVertexData(void) const;
+		/** Advanced method to get the temp buffer information for software
+		skeletal animation.
+		*/
+		TempBlendedBufferInfo* _getSkelAnimTempBufferInfo(void);
+		/** Advanced method to get the temp buffer information for software
+		morph animation.
+		*/
+		TempBlendedBufferInfo* _getVertexAnimTempBufferInfo(void);
+		/// Override to return specific type flag
+		uint32 getTypeFlags(void) const;
+		/// Retrieve the VertexData which should be used for GPU binding
+		VertexData* getVertexDataForBinding(void);
+
+		/// Identify which vertex data we should be sending to the renderer
+		enum VertexDataBindChoice
+		{
+			BIND_ORIGINAL,
+			BIND_SOFTWARE_SKELETAL,
+			BIND_SOFTWARE_MORPH,
+			BIND_HARDWARE_MORPH
+		};
+		/// Choose which vertex data to bind to the renderer
+		VertexDataBindChoice chooseVertexDataForBinding(bool hasVertexAnim);
+
+		/** Are buffers already marked as vertex animated? */
+		bool _getBuffersMarkedForAnimation(void) const { return mVertexAnimationAppliedThisFrame; }
+		/** Mark just this vertex data as animated.
+		*/
+		void _markBuffersUsedForAnimation(void);
+
+		/** Has this Entity been initialised yet?
+		@remarks	
+			If this returns false, it means this Entity hasn't been completely
+			constructed yet from the underlying resources (Mesh, Skeleton), which 
+			probably means they were delay-loaded and aren't available yet. This
+			Entity won't render until it has been successfully initialised, nor
+			will many of the manipulation methods function.
+		*/
+		bool isInitialised(void) const { return mInitialised; }
+
+		/** Try to initialise the Entity from the underlying resources.
+		@remarks
+			This method builds the internal structures of the Entity based on it
+			resources (Mesh, Skeleton). This may or may not succeed if the 
+			resources it references have been earmarked for background loading,
+			so you should check isInitialised afterwards to see if it was successful.
+		@param forceReinitialise If true, this forces the Entity to tear down it's
+			internal structures and try to rebuild them. Useful if you changed the
+			content of a Mesh or Skeleton at runtime.
+		*/
+		void _initialise(bool forceReinitialise = false);
+		/** Tear down the internal structures of this Entity, rendering it uninitialised. */
+		void _deinitialise(void);
+
+		/** Resource::Listener hook to notify Entity that a delay-loaded Mesh is
+			complete.
+		*/
+		void backgroundLoadingComplete(Resource* res);
+
+		/// @copydoc MovableObject::visitRenderables
+		void visitRenderables(Renderable::Visitor* visitor, 
+			bool debugRenderables = false);
+
+        /** Get the lod strategy transformation of the mesh lod factor. */
+        Real _getMeshLodFactorTransformed() const;
+		
+		/** Entity's skeleton's AnimationState will not be automatically updated when set to true.
+			Useful if you wish to handle AnimationState updates manually.
+		*/
+		void setSkipAnimationStateUpdate(bool skip) {
+			mSkipAnimStateUpdates = skip;
+		}
+		
+		/** Entity's skeleton's AnimationState will not be automatically updated when set to true.
+		 Useful if you wish to handle AnimationState updates manually.
+		 */
+		bool getSkipAnimationStateUpdate() const {
+			return mSkipAnimStateUpdates;
+		}
+
+
+		/** The skeleton of the main entity will be updated even if the an LOD entity is being displayed.
+		useful if you have entities attached to the main entity. Otherwise position of attached
+		entities will not be updated.
+		*/
+		void setAlwaysUpdateMainSkeleton(bool update) {
+			mAlwaysUpdateMainSkeleton = update;
+		}
+
+		/** The skeleton of the main entity will be updated even if the an LOD entity is being displayed.
+		useful if you have entities attached to the main entity. Otherwise position of attached
+		entities will not be updated.
+		*/
+		bool getAlwaysUpdateMainSkeleton() const {
+			return mAlwaysUpdateMainSkeleton;
+		}
+
+		
+	};
+
+	/** Factory object for creating Entity instances */
+	class _OgreExport EntityFactory : public MovableObjectFactory
+	{
+	protected:
+		MovableObject* createInstanceImpl( const String& name, const NameValuePairList* params);
+	public:
+		EntityFactory() {}
+		~EntityFactory() {}
+
+		static String FACTORY_TYPE_NAME;
+
+		const String& getType(void) const;
+		void destroyInstance( MovableObject* obj);
+
+	};
+	/** @} */
+	/** @} */
+
+} // namespace
+
+#endif