pg_query 5.0.0 → 6.0.0

data/ext/pg_query/include/storage/s_lock.h

@@ -1,867 +0,0 @@
-/*-------------------------------------------------------------------------
- *
- * s_lock.h
- *	   Hardware-dependent implementation of spinlocks.
- *
- *	NOTE: none of the macros in this file are intended to be called directly.
- *	Call them through the hardware-independent macros in spin.h.
- *
- *	The following hardware-dependent macros must be provided for each
- *	supported platform:
- *
- *	void S_INIT_LOCK(slock_t *lock)
- *		Initialize a spinlock (to the unlocked state).
- *
- *	int S_LOCK(slock_t *lock)
- *		Acquire a spinlock, waiting if necessary.
- *		Time out and abort() if unable to acquire the lock in a
- *		"reasonable" amount of time --- typically ~ 1 minute.
- *		Should return number of "delays"; see s_lock.c
- *
- *	void S_UNLOCK(slock_t *lock)
- *		Unlock a previously acquired lock.
- *
- *	bool S_LOCK_FREE(slock_t *lock)
- *		Tests if the lock is free. Returns true if free, false if locked.
- *		This does *not* change the state of the lock.
- *
- *	void SPIN_DELAY(void)
- *		Delay operation to occur inside spinlock wait loop.
- *
- *	Note to implementors: there are default implementations for all these
- *	macros at the bottom of the file.  Check if your platform can use
- *	these or needs to override them.
- *
- *  Usually, S_LOCK() is implemented in terms of even lower-level macros
- *	TAS() and TAS_SPIN():
- *
- *	int TAS(slock_t *lock)
- *		Atomic test-and-set instruction.  Attempt to acquire the lock,
- *		but do *not* wait.	Returns 0 if successful, nonzero if unable
- *		to acquire the lock.
- *
- *	int TAS_SPIN(slock_t *lock)
- *		Like TAS(), but this version is used when waiting for a lock
- *		previously found to be contended.  By default, this is the
- *		same as TAS(), but on some architectures it's better to poll a
- *		contended lock using an unlocked instruction and retry the
- *		atomic test-and-set only when it appears free.
- *
- *	TAS() and TAS_SPIN() are NOT part of the API, and should never be called
- *	directly.
- *
- *	CAUTION: on some platforms TAS() and/or TAS_SPIN() may sometimes report
- *	failure to acquire a lock even when the lock is not locked.  For example,
- *	on Alpha TAS() will "fail" if interrupted.  Therefore a retry loop must
- *	always be used, even if you are certain the lock is free.
- *
- *	It is the responsibility of these macros to make sure that the compiler
- *	does not re-order accesses to shared memory to precede the actual lock
- *	acquisition, or follow the lock release.  Prior to PostgreSQL 9.5, this
- *	was the caller's responsibility, which meant that callers had to use
- *	volatile-qualified pointers to refer to both the spinlock itself and the
- *	shared data being accessed within the spinlocked critical section.  This
- *	was notationally awkward, easy to forget (and thus error-prone), and
- *	prevented some useful compiler optimizations.  For these reasons, we
- *	now require that the macros themselves prevent compiler re-ordering,
- *	so that the caller doesn't need to take special precautions.
- *
- *	On platforms with weak memory ordering, the TAS(), TAS_SPIN(), and
- *	S_UNLOCK() macros must further include hardware-level memory fence
- *	instructions to prevent similar re-ordering at the hardware level.
- *	TAS() and TAS_SPIN() must guarantee that loads and stores issued after
- *	the macro are not executed until the lock has been obtained.  Conversely,
- *	S_UNLOCK() must guarantee that loads and stores issued before the macro
- *	have been executed before the lock is released.
- *
- *	On most supported platforms, TAS() uses a tas() function written
- *	in assembly language to execute a hardware atomic-test-and-set
- *	instruction.  Equivalent OS-supplied mutex routines could be used too.
- *
- *	If no system-specific TAS() is available (ie, HAVE_SPINLOCKS is not
- *	defined), then we fall back on an emulation that uses SysV semaphores
- *	(see spin.c).  This emulation will be MUCH MUCH slower than a proper TAS()
- *	implementation, because of the cost of a kernel call per lock or unlock.
- *	An old report is that Postgres spends around 40% of its time in semop(2)
- *	when using the SysV semaphore code.
- *
- *
- * Portions Copyright (c) 1996-2023, PostgreSQL Global Development Group
- * Portions Copyright (c) 1994, Regents of the University of California
- *
- *	  src/include/storage/s_lock.h
- *
- *-------------------------------------------------------------------------
- */
-#ifndef S_LOCK_H
-#define S_LOCK_H
-
-#ifdef FRONTEND
-#error "s_lock.h may not be included from frontend code"
-#endif
-
-#ifdef HAVE_SPINLOCKS	/* skip spinlocks if requested */
-
-#if defined(__GNUC__) || defined(__INTEL_COMPILER)
-/*************************************************************************
- * All the gcc inlines
- * Gcc consistently defines the CPU as __cpu__.
- * Other compilers use __cpu or __cpu__ so we test for both in those cases.
- */
-
-/*----------
- * Standard gcc asm format (assuming "volatile slock_t *lock"):
-
-	__asm__ __volatile__(
-		"	instruction	\n"
-		"	instruction	\n"
-		"	instruction	\n"
-:		"=r"(_res), "+m"(*lock)		// return register, in/out lock value
-:		"r"(lock)					// lock pointer, in input register
-:		"memory", "cc");			// show clobbered registers here
-
- * The output-operands list (after first colon) should always include
- * "+m"(*lock), whether or not the asm code actually refers to this
- * operand directly.  This ensures that gcc believes the value in the
- * lock variable is used and set by the asm code.  Also, the clobbers
- * list (after third colon) should always include "memory"; this prevents
- * gcc from thinking it can cache the values of shared-memory fields
- * across the asm code.  Add "cc" if your asm code changes the condition
- * code register, and also list any temp registers the code uses.
- *----------
- */
-
-
-#ifdef __i386__		/* 32-bit i386 */
-#define HAS_TEST_AND_SET
-
-typedef unsigned char slock_t;
-
-#define TAS(lock) tas(lock)
-
-static __inline__ int
-tas(volatile slock_t *lock)
-{
-	slock_t		_res = 1;
-
-	/*
-	 * Use a non-locking test before asserting the bus lock.  Note that the
-	 * extra test appears to be a small loss on some x86 platforms and a small
-	 * win on others; it's by no means clear that we should keep it.
-	 *
-	 * When this was last tested, we didn't have separate TAS() and TAS_SPIN()
-	 * macros.  Nowadays it probably would be better to do a non-locking test
-	 * in TAS_SPIN() but not in TAS(), like on x86_64, but no-one's done the
-	 * testing to verify that.  Without some empirical evidence, better to
-	 * leave it alone.
-	 */
-	__asm__ __volatile__(
-		"	cmpb	$0,%1	\n"
-		"	jne		1f		\n"
-		"	lock			\n"
-		"	xchgb	%0,%1	\n"
-		"1: \n"
-:		"+q"(_res), "+m"(*lock)
-:		/* no inputs */
-:		"memory", "cc");
-	return (int) _res;
-}
-
-#define SPIN_DELAY() spin_delay()
-
-static __inline__ void
-spin_delay(void)
-{
-	/*
-	 * This sequence is equivalent to the PAUSE instruction ("rep" is
-	 * ignored by old IA32 processors if the following instruction is
-	 * not a string operation); the IA-32 Architecture Software
-	 * Developer's Manual, Vol. 3, Section 7.7.2 describes why using
-	 * PAUSE in the inner loop of a spin lock is necessary for good
-	 * performance:
-	 *
-	 *     The PAUSE instruction improves the performance of IA-32
-	 *     processors supporting Hyper-Threading Technology when
-	 *     executing spin-wait loops and other routines where one
-	 *     thread is accessing a shared lock or semaphore in a tight
-	 *     polling loop. When executing a spin-wait loop, the
-	 *     processor can suffer a severe performance penalty when
-	 *     exiting the loop because it detects a possible memory order
-	 *     violation and flushes the core processor's pipeline. The
-	 *     PAUSE instruction provides a hint to the processor that the
-	 *     code sequence is a spin-wait loop. The processor uses this
-	 *     hint to avoid the memory order violation and prevent the
-	 *     pipeline flush. In addition, the PAUSE instruction
-	 *     de-pipelines the spin-wait loop to prevent it from
-	 *     consuming execution resources excessively.
-	 */
-	__asm__ __volatile__(
-		" rep; nop			\n");
-}
-
-#endif	 /* __i386__ */
-
-
-#ifdef __x86_64__		/* AMD Opteron, Intel EM64T */
-#define HAS_TEST_AND_SET
-
-typedef unsigned char slock_t;
-
-#define TAS(lock) tas(lock)
-
-/*
- * On Intel EM64T, it's a win to use a non-locking test before the xchg proper,
- * but only when spinning.
- *
- * See also Implementing Scalable Atomic Locks for Multi-Core Intel(tm) EM64T
- * and IA32, by Michael Chynoweth and Mary R. Lee. As of this writing, it is
- * available at:
- * http://software.intel.com/en-us/articles/implementing-scalable-atomic-locks-for-multi-core-intel-em64t-and-ia32-architectures
- */
-#define TAS_SPIN(lock)    (*(lock) ? 1 : TAS(lock))
-
-static __inline__ int
-tas(volatile slock_t *lock)
-{
-	slock_t		_res = 1;
-
-	__asm__ __volatile__(
-		"	lock			\n"
-		"	xchgb	%0,%1	\n"
-:		"+q"(_res), "+m"(*lock)
-:		/* no inputs */
-:		"memory", "cc");
-	return (int) _res;
-}
-
-#define SPIN_DELAY() spin_delay()
-
-static __inline__ void
-spin_delay(void)
-{
-	/*
-	 * Adding a PAUSE in the spin delay loop is demonstrably a no-op on
-	 * Opteron, but it may be of some use on EM64T, so we keep it.
-	 */
-	__asm__ __volatile__(
-		" rep; nop			\n");
-}
-
-#endif	 /* __x86_64__ */
-
-
-/*
- * On ARM and ARM64, we use __sync_lock_test_and_set(int *, int) if available.
- *
- * We use the int-width variant of the builtin because it works on more chips
- * than other widths.
- */
-#if defined(__arm__) || defined(__arm) || defined(__aarch64__)
-#ifdef HAVE_GCC__SYNC_INT32_TAS
-#define HAS_TEST_AND_SET
-
-#define TAS(lock) tas(lock)
-
-typedef int slock_t;
-
-static __inline__ int
-tas(volatile slock_t *lock)
-{
-	return __sync_lock_test_and_set(lock, 1);
-}
-
-#define S_UNLOCK(lock) __sync_lock_release(lock)
-
-/*
- * Using an ISB instruction to delay in spinlock loops appears beneficial on
- * high-core-count ARM64 processors.  It seems mostly a wash for smaller gear,
- * and ISB doesn't exist at all on pre-v7 ARM chips.
- */
-#if defined(__aarch64__)
-
-#define SPIN_DELAY() spin_delay()
-
-static __inline__ void
-spin_delay(void)
-{
-	__asm__ __volatile__(
-		" isb;				\n");
-}
-
-#endif	 /* __aarch64__ */
-#endif	 /* HAVE_GCC__SYNC_INT32_TAS */
-#endif	 /* __arm__ || __arm || __aarch64__ */
-
-
-/* S/390 and S/390x Linux (32- and 64-bit zSeries) */
-#if defined(__s390__) || defined(__s390x__)
-#define HAS_TEST_AND_SET
-
-typedef unsigned int slock_t;
-
-#define TAS(lock)	   tas(lock)
-
-static __inline__ int
-tas(volatile slock_t *lock)
-{
-	int			_res = 0;
-
-	__asm__	__volatile__(
-		"	cs 	%0,%3,0(%2)		\n"
-:		"+d"(_res), "+m"(*lock)
-:		"a"(lock), "d"(1)
-:		"memory", "cc");
-	return _res;
-}
-
-#endif	 /* __s390__ || __s390x__ */
-
-
-#if defined(__sparc__)		/* Sparc */
-/*
- * Solaris has always run sparc processors in TSO (total store) mode, but
- * linux didn't use to and the *BSDs still don't. So, be careful about
- * acquire/release semantics. The CPU will treat superfluous members as
- * NOPs, so it's just code space.
- */
-#define HAS_TEST_AND_SET
-
-typedef unsigned char slock_t;
-
-#define TAS(lock) tas(lock)
-
-static __inline__ int
-tas(volatile slock_t *lock)
-{
-	slock_t		_res;
-
-	/*
-	 *	See comment in src/backend/port/tas/sunstudio_sparc.s for why this
-	 *	uses "ldstub", and that file uses "cas".  gcc currently generates
-	 *	sparcv7-targeted binaries, so "cas" use isn't possible.
-	 */
-	__asm__ __volatile__(
-		"	ldstub	[%2], %0	\n"
-:		"=r"(_res), "+m"(*lock)
-:		"r"(lock)
-:		"memory");
-#if defined(__sparcv7) || defined(__sparc_v7__)
-	/*
-	 * No stbar or membar available, luckily no actually produced hardware
-	 * requires a barrier.
-	 */
-#elif defined(__sparcv8) || defined(__sparc_v8__)
-	/* stbar is available (and required for both PSO, RMO), membar isn't */
-	__asm__ __volatile__ ("stbar	 \n":::"memory");
-#else
-	/*
-	 * #LoadStore (RMO) | #LoadLoad (RMO) together are the appropriate acquire
-	 * barrier for sparcv8+ upwards.
-	 */
-	__asm__ __volatile__ ("membar #LoadStore | #LoadLoad \n":::"memory");
-#endif
-	return (int) _res;
-}
-
-#if defined(__sparcv7) || defined(__sparc_v7__)
-/*
- * No stbar or membar available, luckily no actually produced hardware
- * requires a barrier.  We fall through to the default gcc definition of
- * S_UNLOCK in this case.
- */
-#elif defined(__sparcv8) || defined(__sparc_v8__)
-/* stbar is available (and required for both PSO, RMO), membar isn't */
-#define S_UNLOCK(lock)	\
-do \
-{ \
-	__asm__ __volatile__ ("stbar	 \n":::"memory"); \
-	*((volatile slock_t *) (lock)) = 0; \
-} while (0)
-#else
-/*
- * #LoadStore (RMO) | #StoreStore (RMO, PSO) together are the appropriate
- * release barrier for sparcv8+ upwards.
- */
-#define S_UNLOCK(lock)	\
-do \
-{ \
-	__asm__ __volatile__ ("membar #LoadStore | #StoreStore \n":::"memory"); \
-	*((volatile slock_t *) (lock)) = 0; \
-} while (0)
-#endif
-
-#endif	 /* __sparc__ */
-
-
-/* PowerPC */
-#if defined(__ppc__) || defined(__powerpc__) || defined(__ppc64__) || defined(__powerpc64__)
-#define HAS_TEST_AND_SET
-
-typedef unsigned int slock_t;
-
-#define TAS(lock) tas(lock)
-
-/* On PPC, it's a win to use a non-locking test before the lwarx */
-#define TAS_SPIN(lock)	(*(lock) ? 1 : TAS(lock))
-
-/*
- * The second operand of addi can hold a constant zero or a register number,
- * hence constraint "=&b" to avoid allocating r0.  "b" stands for "address
- * base register"; most operands having this register-or-zero property are
- * address bases, e.g. the second operand of lwax.
- *
- * NOTE: per the Enhanced PowerPC Architecture manual, v1.0 dated 7-May-2002,
- * an isync is a sufficient synchronization barrier after a lwarx/stwcx loop.
- * But if the spinlock is in ordinary memory, we can use lwsync instead for
- * better performance.
- *
- * Ordinarily, we'd code the branches here using GNU-style local symbols, that
- * is "1f" referencing "1:" and so on.  But some people run gcc on AIX with
- * IBM's assembler as backend, and IBM's assembler doesn't do local symbols.
- * So hand-code the branch offsets; fortunately, all PPC instructions are
- * exactly 4 bytes each, so it's not too hard to count.
- */
-static __inline__ int
-tas(volatile slock_t *lock)
-{
-	slock_t _t;
-	int _res;
-
-	__asm__ __volatile__(
-"	lwarx   %0,0,%3,1	\n"
-"	cmpwi   %0,0		\n"
-"	bne     $+16		\n"		/* branch to li %1,1 */
-"	addi    %0,%0,1		\n"
-"	stwcx.  %0,0,%3		\n"
-"	beq     $+12		\n"		/* branch to lwsync */
-"	li      %1,1		\n"
-"	b       $+12		\n"		/* branch to end of asm sequence */
-"	lwsync				\n"
-"	li      %1,0		\n"
-
-:	"=&b"(_t), "=r"(_res), "+m"(*lock)
-:	"r"(lock)
-:	"memory", "cc");
-	return _res;
-}
-
-/*
- * PowerPC S_UNLOCK is almost standard but requires a "sync" instruction.
- * But we can use lwsync instead for better performance.
- */
-#define S_UNLOCK(lock)	\
-do \
-{ \
-	__asm__ __volatile__ ("	lwsync \n" ::: "memory"); \
-	*((volatile slock_t *) (lock)) = 0; \
-} while (0)
-
-#endif /* powerpc */
-
-
-#if defined(__mips__) && !defined(__sgi)	/* non-SGI MIPS */
-#define HAS_TEST_AND_SET
-
-typedef unsigned int slock_t;
-
-#define TAS(lock) tas(lock)
-
-/*
- * Original MIPS-I processors lacked the LL/SC instructions, but if we are
- * so unfortunate as to be running on one of those, we expect that the kernel
- * will handle the illegal-instruction traps and emulate them for us.  On
- * anything newer (and really, MIPS-I is extinct) LL/SC is the only sane
- * choice because any other synchronization method must involve a kernel
- * call.  Unfortunately, many toolchains still default to MIPS-I as the
- * codegen target; if the symbol __mips shows that that's the case, we
- * have to force the assembler to accept LL/SC.
- *
- * R10000 and up processors require a separate SYNC, which has the same
- * issues as LL/SC.
- */
-#if __mips < 2
-#define MIPS_SET_MIPS2	"       .set mips2          \n"
-#else
-#define MIPS_SET_MIPS2
-#endif
-
-static __inline__ int
-tas(volatile slock_t *lock)
-{
-	volatile slock_t *_l = lock;
-	int			_res;
-	int			_tmp;
-
-	__asm__ __volatile__(
-		"       .set push           \n"
-		MIPS_SET_MIPS2
-		"       .set noreorder      \n"
-		"       .set nomacro        \n"
-		"       ll      %0, %2      \n"
-		"       or      %1, %0, 1   \n"
-		"       sc      %1, %2      \n"
-		"       xori    %1, 1       \n"
-		"       or      %0, %0, %1  \n"
-		"       sync                \n"
-		"       .set pop              "
-:		"=&r" (_res), "=&r" (_tmp), "+R" (*_l)
-:		/* no inputs */
-:		"memory");
-	return _res;
-}
-
-/* MIPS S_UNLOCK is almost standard but requires a "sync" instruction */
-#define S_UNLOCK(lock)	\
-do \
-{ \
-	__asm__ __volatile__( \
-		"       .set push           \n" \
-		MIPS_SET_MIPS2 \
-		"       .set noreorder      \n" \
-		"       .set nomacro        \n" \
-		"       sync                \n" \
-		"       .set pop              " \
-:		/* no outputs */ \
-:		/* no inputs */	\
-:		"memory"); \
-	*((volatile slock_t *) (lock)) = 0; \
-} while (0)
-
-#endif /* __mips__ && !__sgi */
-
-
-#if defined(__hppa) || defined(__hppa__)	/* HP PA-RISC */
-/*
- * HP's PA-RISC
- *
- * Because LDCWX requires a 16-byte-aligned address, we declare slock_t as a
- * 16-byte struct.  The active word in the struct is whichever has the aligned
- * address; the other three words just sit at -1.
- */
-#define HAS_TEST_AND_SET
-
-typedef struct
-{
-	int			sema[4];
-} slock_t;
-
-#define TAS_ACTIVE_WORD(lock)	((volatile int *) (((uintptr_t) (lock) + 15) & ~15))
-
-static __inline__ int
-tas(volatile slock_t *lock)
-{
-	volatile int *lockword = TAS_ACTIVE_WORD(lock);
-	int			lockval;
-
-	/*
-	 * The LDCWX instruction atomically clears the target word and
-	 * returns the previous value.  Hence, if the instruction returns
-	 * 0, someone else has already acquired the lock before we tested
-	 * it (i.e., we have failed).
-	 *
-	 * Notice that this means that we actually clear the word to set
-	 * the lock and set the word to clear the lock.  This is the
-	 * opposite behavior from the SPARC LDSTUB instruction.  For some
-	 * reason everything that H-P does is rather baroque...
-	 *
-	 * For details about the LDCWX instruction, see the "Precision
-	 * Architecture and Instruction Reference Manual" (09740-90014 of June
-	 * 1987), p. 5-38.
-	 */
-	__asm__ __volatile__(
-		"	ldcwx	0(0,%2),%0	\n"
-:		"=r"(lockval), "+m"(*lockword)
-:		"r"(lockword)
-:		"memory");
-	return (lockval == 0);
-}
-
-#define S_UNLOCK(lock)	\
-	do { \
-		__asm__ __volatile__("" : : : "memory"); \
-		*TAS_ACTIVE_WORD(lock) = -1; \
-	} while (0)
-
-#define S_INIT_LOCK(lock) \
-	do { \
-		volatile slock_t *lock_ = (lock); \
-		lock_->sema[0] = -1; \
-		lock_->sema[1] = -1; \
-		lock_->sema[2] = -1; \
-		lock_->sema[3] = -1; \
-	} while (0)
-
-#define S_LOCK_FREE(lock)	(*TAS_ACTIVE_WORD(lock) != 0)
-
-#endif	 /* __hppa || __hppa__ */
-
-
-/*
- * If we have no platform-specific knowledge, but we found that the compiler
- * provides __sync_lock_test_and_set(), use that.  Prefer the int-width
- * version over the char-width version if we have both, on the rather dubious
- * grounds that that's known to be more likely to work in the ARM ecosystem.
- * (But we dealt with ARM above.)
- */
-#if !defined(HAS_TEST_AND_SET)
-
-#if defined(HAVE_GCC__SYNC_INT32_TAS)
-#define HAS_TEST_AND_SET
-
-#define TAS(lock) tas(lock)
-
-typedef int slock_t;
-
-static __inline__ int
-tas(volatile slock_t *lock)
-{
-	return __sync_lock_test_and_set(lock, 1);
-}
-
-#define S_UNLOCK(lock) __sync_lock_release(lock)
-
-#elif defined(HAVE_GCC__SYNC_CHAR_TAS)
-#define HAS_TEST_AND_SET
-
-#define TAS(lock) tas(lock)
-
-typedef char slock_t;
-
-static __inline__ int
-tas(volatile slock_t *lock)
-{
-	return __sync_lock_test_and_set(lock, 1);
-}
-
-#define S_UNLOCK(lock) __sync_lock_release(lock)
-
-#endif	 /* HAVE_GCC__SYNC_INT32_TAS */
-
-#endif	/* !defined(HAS_TEST_AND_SET) */
-
-
-/*
- * Default implementation of S_UNLOCK() for gcc/icc.
- *
- * Note that this implementation is unsafe for any platform that can reorder
- * a memory access (either load or store) after a following store.  That
- * happens not to be possible on x86 and most legacy architectures (some are
- * single-processor!), but many modern systems have weaker memory ordering.
- * Those that do must define their own version of S_UNLOCK() rather than
- * relying on this one.
- */
-#if !defined(S_UNLOCK)
-#define S_UNLOCK(lock)	\
-	do { __asm__ __volatile__("" : : : "memory");  *(lock) = 0; } while (0)
-#endif
-
-#endif	/* defined(__GNUC__) || defined(__INTEL_COMPILER) */
-
-
-/*
- * ---------------------------------------------------------------------
- * Platforms that use non-gcc inline assembly:
- * ---------------------------------------------------------------------
- */
-
-#if !defined(HAS_TEST_AND_SET)	/* We didn't trigger above, let's try here */
-
-#if defined(_AIX)	/* AIX */
-/*
- * AIX (POWER)
- */
-#define HAS_TEST_AND_SET
-
-#include <sys/atomic_op.h>
-
-typedef int slock_t;
-
-#define TAS(lock)			_check_lock((slock_t *) (lock), 0, 1)
-#define S_UNLOCK(lock)		_clear_lock((slock_t *) (lock), 0)
-#endif	 /* _AIX */
-
-
-/* These are in sunstudio_(sparc|x86).s */
-
-#if defined(__SUNPRO_C) && (defined(__i386) || defined(__x86_64__) || defined(__sparc__) || defined(__sparc))
-#define HAS_TEST_AND_SET
-
-#if defined(__i386) || defined(__x86_64__) || defined(__sparcv9) || defined(__sparcv8plus)
-typedef unsigned int slock_t;
-#else
-typedef unsigned char slock_t;
-#endif
-
-extern slock_t pg_atomic_cas(volatile slock_t *lock, slock_t with,
-									  slock_t cmp);
-
-#define TAS(a) (pg_atomic_cas((a), 1, 0) != 0)
-#endif
-
-
-#ifdef _MSC_VER
-typedef LONG slock_t;
-
-#define HAS_TEST_AND_SET
-#define TAS(lock) (InterlockedCompareExchange(lock, 1, 0))
-
-#define SPIN_DELAY() spin_delay()
-
-/* If using Visual C++ on Win64, inline assembly is unavailable.
- * Use a _mm_pause intrinsic instead of rep nop.
- */
-#if defined(_WIN64)
-static __forceinline void
-spin_delay(void)
-{
-	_mm_pause();
-}
-#else
-static __forceinline void
-spin_delay(void)
-{
-	/* See comment for gcc code. Same code, MASM syntax */
-	__asm rep nop;
-}
-#endif
-
-#include <intrin.h>
-#pragma intrinsic(_ReadWriteBarrier)
-
-#define S_UNLOCK(lock)	\
-	do { _ReadWriteBarrier(); (*(lock)) = 0; } while (0)
-
-#endif
-
-
-#endif	/* !defined(HAS_TEST_AND_SET) */
-
-
-/* Blow up if we didn't have any way to do spinlocks */
-#ifndef HAS_TEST_AND_SET
-#error PostgreSQL does not have native spinlock support on this platform.  To continue the compilation, rerun configure using --disable-spinlocks.  However, performance will be poor.  Please report this to pgsql-bugs@lists.postgresql.org.
-#endif
-
-
-#else	/* !HAVE_SPINLOCKS */
-
-
-/*
- * Fake spinlock implementation using semaphores --- slow and prone
- * to fall foul of kernel limits on number of semaphores, so don't use this
- * unless you must!  The subroutines appear in spin.c.
- */
-typedef int slock_t;
-
-extern bool s_lock_free_sema(volatile slock_t *lock);
-extern void s_unlock_sema(volatile slock_t *lock);
-extern void s_init_lock_sema(volatile slock_t *lock, bool nested);
-extern int	tas_sema(volatile slock_t *lock);
-
-#define S_LOCK_FREE(lock)	s_lock_free_sema(lock)
-#define S_UNLOCK(lock)	 s_unlock_sema(lock)
-#define S_INIT_LOCK(lock)	s_init_lock_sema(lock, false)
-#define TAS(lock)	tas_sema(lock)
-
-
-#endif	/* HAVE_SPINLOCKS */
-
-
-/*
- * Default Definitions - override these above as needed.
- */
-
-#if !defined(S_LOCK)
-#define S_LOCK(lock) \
-	(TAS(lock) ? s_lock((lock), __FILE__, __LINE__, __func__) : 0)
-#endif	 /* S_LOCK */
-
-#if !defined(S_LOCK_FREE)
-#define S_LOCK_FREE(lock)	(*(lock) == 0)
-#endif	 /* S_LOCK_FREE */
-
-#if !defined(S_UNLOCK)
-/*
- * Our default implementation of S_UNLOCK is essentially *(lock) = 0.  This
- * is unsafe if the platform can reorder a memory access (either load or
- * store) after a following store; platforms where this is possible must
- * define their own S_UNLOCK.  But CPU reordering is not the only concern:
- * if we simply defined S_UNLOCK() as an inline macro, the compiler might
- * reorder instructions from inside the critical section to occur after the
- * lock release.  Since the compiler probably can't know what the external
- * function s_unlock is doing, putting the same logic there should be adequate.
- * A sufficiently-smart globally optimizing compiler could break that
- * assumption, though, and the cost of a function call for every spinlock
- * release may hurt performance significantly, so we use this implementation
- * only for platforms where we don't know of a suitable intrinsic.  For the
- * most part, those are relatively obscure platform/compiler combinations to
- * which the PostgreSQL project does not have access.
- */
-#define USE_DEFAULT_S_UNLOCK
-extern void s_unlock(volatile slock_t *lock);
-#define S_UNLOCK(lock)		s_unlock(lock)
-#endif	 /* S_UNLOCK */
-
-#if !defined(S_INIT_LOCK)
-#define S_INIT_LOCK(lock)	S_UNLOCK(lock)
-#endif	 /* S_INIT_LOCK */
-
-#if !defined(SPIN_DELAY)
-#define SPIN_DELAY()	((void) 0)
-#endif	 /* SPIN_DELAY */
-
-#if !defined(TAS)
-extern int	tas(volatile slock_t *lock);		/* in port/.../tas.s, or
-												 * s_lock.c */
-
-#define TAS(lock)		tas(lock)
-#endif	 /* TAS */
-
-#if !defined(TAS_SPIN)
-#define TAS_SPIN(lock)	TAS(lock)
-#endif	 /* TAS_SPIN */
-
-extern PGDLLIMPORT slock_t dummy_spinlock;
-
-/*
- * Platform-independent out-of-line support routines
- */
-extern int s_lock(volatile slock_t *lock, const char *file, int line, const char *func);
-
-/* Support for dynamic adjustment of spins_per_delay */
-#define DEFAULT_SPINS_PER_DELAY  100
-
-extern void set_spins_per_delay(int shared_spins_per_delay);
-extern int	update_spins_per_delay(int shared_spins_per_delay);
-
-/*
- * Support for spin delay which is useful in various places where
- * spinlock-like procedures take place.
- */
-typedef struct
-{
-	int			spins;
-	int			delays;
-	int			cur_delay;
-	const char *file;
-	int			line;
-	const char *func;
-} SpinDelayStatus;
-
-static inline void
-init_spin_delay(SpinDelayStatus *status,
-				const char *file, int line, const char *func)
-{
-	status->spins = 0;
-	status->delays = 0;
-	status->cur_delay = 0;
-	status->file = file;
-	status->line = line;
-	status->func = func;
-}
-
-#define init_local_spin_delay(status) init_spin_delay(status, __FILE__, __LINE__, __func__)
-extern void perform_spin_delay(SpinDelayStatus *status);
-extern void finish_spin_delay(SpinDelayStatus *status);
-
-#endif	 /* S_LOCK_H */