pg_query 5.0.0 → 6.0.0

data/ext/pg_query/include/access/tableam.h

@@ -1,2100 +0,0 @@
-/*-------------------------------------------------------------------------
- *
- * tableam.h
- *	  POSTGRES table access method definitions.
- *
- *
- * Portions Copyright (c) 1996-2023, PostgreSQL Global Development Group
- * Portions Copyright (c) 1994, Regents of the University of California
- *
- * src/include/access/tableam.h
- *
- * NOTES
- *		See tableam.sgml for higher level documentation.
- *
- *-------------------------------------------------------------------------
- */
-#ifndef TABLEAM_H
-#define TABLEAM_H
-
-#include "access/relscan.h"
-#include "access/sdir.h"
-#include "access/xact.h"
-#include "executor/tuptable.h"
-#include "utils/rel.h"
-#include "utils/snapshot.h"
-
-
-#define DEFAULT_TABLE_ACCESS_METHOD	"heap"
-
-/* GUCs */
-extern PGDLLIMPORT char *default_table_access_method;
-extern PGDLLIMPORT bool synchronize_seqscans;
-
-
-struct BulkInsertStateData;
-struct IndexInfo;
-struct SampleScanState;
-struct TBMIterateResult;
-struct VacuumParams;
-struct ValidateIndexState;
-
-/*
- * Bitmask values for the flags argument to the scan_begin callback.
- */
-typedef enum ScanOptions
-{
-	/* one of SO_TYPE_* may be specified */
-	SO_TYPE_SEQSCAN = 1 << 0,
-	SO_TYPE_BITMAPSCAN = 1 << 1,
-	SO_TYPE_SAMPLESCAN = 1 << 2,
-	SO_TYPE_TIDSCAN = 1 << 3,
-	SO_TYPE_TIDRANGESCAN = 1 << 4,
-	SO_TYPE_ANALYZE = 1 << 5,
-
-	/* several of SO_ALLOW_* may be specified */
-	/* allow or disallow use of access strategy */
-	SO_ALLOW_STRAT = 1 << 6,
-	/* report location to syncscan logic? */
-	SO_ALLOW_SYNC = 1 << 7,
-	/* verify visibility page-at-a-time? */
-	SO_ALLOW_PAGEMODE = 1 << 8,
-
-	/* unregister snapshot at scan end? */
-	SO_TEMP_SNAPSHOT = 1 << 9
-} ScanOptions;
-
-/*
- * Result codes for table_{update,delete,lock_tuple}, and for visibility
- * routines inside table AMs.
- */
-typedef enum TM_Result
-{
-	/*
-	 * Signals that the action succeeded (i.e. update/delete performed, lock
-	 * was acquired)
-	 */
-	TM_Ok,
-
-	/* The affected tuple wasn't visible to the relevant snapshot */
-	TM_Invisible,
-
-	/* The affected tuple was already modified by the calling backend */
-	TM_SelfModified,
-
-	/*
-	 * The affected tuple was updated by another transaction. This includes
-	 * the case where tuple was moved to another partition.
-	 */
-	TM_Updated,
-
-	/* The affected tuple was deleted by another transaction */
-	TM_Deleted,
-
-	/*
-	 * The affected tuple is currently being modified by another session. This
-	 * will only be returned if table_(update/delete/lock_tuple) are
-	 * instructed not to wait.
-	 */
-	TM_BeingModified,
-
-	/* lock couldn't be acquired, action skipped. Only used by lock_tuple */
-	TM_WouldBlock
-} TM_Result;
-
-/*
- * Result codes for table_update(..., update_indexes*..).
- * Used to determine which indexes to update.
- */
-typedef enum TU_UpdateIndexes
-{
-	/* No indexed columns were updated (incl. TID addressing of tuple) */
-	TU_None,
-
-	/* A non-summarizing indexed column was updated, or the TID has changed */
-	TU_All,
-
-	/* Only summarized columns were updated, TID is unchanged */
-	TU_Summarizing
-} TU_UpdateIndexes;
-
-/*
- * When table_tuple_update, table_tuple_delete, or table_tuple_lock fail
- * because the target tuple is already outdated, they fill in this struct to
- * provide information to the caller about what happened.
- *
- * ctid is the target's ctid link: it is the same as the target's TID if the
- * target was deleted, or the location of the replacement tuple if the target
- * was updated.
- *
- * xmax is the outdating transaction's XID.  If the caller wants to visit the
- * replacement tuple, it must check that this matches before believing the
- * replacement is really a match.
- *
- * cmax is the outdating command's CID, but only when the failure code is
- * TM_SelfModified (i.e., something in the current transaction outdated the
- * tuple); otherwise cmax is zero.  (We make this restriction because
- * HeapTupleHeaderGetCmax doesn't work for tuples outdated in other
- * transactions.)
- */
-typedef struct TM_FailureData
-{
-	ItemPointerData ctid;
-	TransactionId xmax;
-	CommandId	cmax;
-	bool		traversed;
-} TM_FailureData;
-
-/*
- * State used when calling table_index_delete_tuples().
- *
- * Represents the status of table tuples, referenced by table TID and taken by
- * index AM from index tuples.  State consists of high level parameters of the
- * deletion operation, plus two mutable palloc()'d arrays for information
- * about the status of individual table tuples.  These are conceptually one
- * single array.  Using two arrays keeps the TM_IndexDelete struct small,
- * which makes sorting the first array (the deltids array) fast.
- *
- * Some index AM callers perform simple index tuple deletion (by specifying
- * bottomup = false), and include only known-dead deltids.  These known-dead
- * entries are all marked knowndeletable = true directly (typically these are
- * TIDs from LP_DEAD-marked index tuples), but that isn't strictly required.
- *
- * Callers that specify bottomup = true are "bottom-up index deletion"
- * callers.  The considerations for the tableam are more subtle with these
- * callers because they ask the tableam to perform highly speculative work,
- * and might only expect the tableam to check a small fraction of all entries.
- * Caller is not allowed to specify knowndeletable = true for any entry
- * because everything is highly speculative.  Bottom-up caller provides
- * context and hints to tableam -- see comments below for details on how index
- * AMs and tableams should coordinate during bottom-up index deletion.
- *
- * Simple index deletion callers may ask the tableam to perform speculative
- * work, too.  This is a little like bottom-up deletion, but not too much.
- * The tableam will only perform speculative work when it's practically free
- * to do so in passing for simple deletion caller (while always performing
- * whatever work is needed to enable knowndeletable/LP_DEAD index tuples to
- * be deleted within index AM).  This is the real reason why it's possible for
- * simple index deletion caller to specify knowndeletable = false up front
- * (this means "check if it's possible for me to delete corresponding index
- * tuple when it's cheap to do so in passing").  The index AM should only
- * include "extra" entries for index tuples whose TIDs point to a table block
- * that tableam is expected to have to visit anyway (in the event of a block
- * orientated tableam).  The tableam isn't strictly obligated to check these
- * "extra" TIDs, but a block-based AM should always manage to do so in
- * practice.
- *
- * The final contents of the deltids/status arrays are interesting to callers
- * that ask tableam to perform speculative work (i.e. when _any_ items have
- * knowndeletable set to false up front).  These index AM callers will
- * naturally need to consult final state to determine which index tuples are
- * in fact deletable.
- *
- * The index AM can keep track of which index tuple relates to which deltid by
- * setting idxoffnum (and/or relying on each entry being uniquely identifiable
- * using tid), which is important when the final contents of the array will
- * need to be interpreted -- the array can shrink from initial size after
- * tableam processing and/or have entries in a new order (tableam may sort
- * deltids array for its own reasons).  Bottom-up callers may find that final
- * ndeltids is 0 on return from call to tableam, in which case no index tuple
- * deletions are possible.  Simple deletion callers can rely on any entries
- * they know to be deletable appearing in the final array as deletable.
- */
-typedef struct TM_IndexDelete
-{
-	ItemPointerData tid;		/* table TID from index tuple */
-	int16		id;				/* Offset into TM_IndexStatus array */
-} TM_IndexDelete;
-
-typedef struct TM_IndexStatus
-{
-	OffsetNumber idxoffnum;		/* Index am page offset number */
-	bool		knowndeletable; /* Currently known to be deletable? */
-
-	/* Bottom-up index deletion specific fields follow */
-	bool		promising;		/* Promising (duplicate) index tuple? */
-	int16		freespace;		/* Space freed in index if deleted */
-} TM_IndexStatus;
-
-/*
- * Index AM/tableam coordination is central to the design of bottom-up index
- * deletion.  The index AM provides hints about where to look to the tableam
- * by marking some entries as "promising".  Index AM does this with duplicate
- * index tuples that are strongly suspected to be old versions left behind by
- * UPDATEs that did not logically modify indexed values.  Index AM may find it
- * helpful to only mark entries as promising when they're thought to have been
- * affected by such an UPDATE in the recent past.
- *
- * Bottom-up index deletion casts a wide net at first, usually by including
- * all TIDs on a target index page.  It is up to the tableam to worry about
- * the cost of checking transaction status information.  The tableam is in
- * control, but needs careful guidance from the index AM.  Index AM requests
- * that bottomupfreespace target be met, while tableam measures progress
- * towards that goal by tallying the per-entry freespace value for known
- * deletable entries. (All !bottomup callers can just set these space related
- * fields to zero.)
- */
-typedef struct TM_IndexDeleteOp
-{
-	Relation	irel;			/* Target index relation */
-	BlockNumber iblknum;		/* Index block number (for error reports) */
-	bool		bottomup;		/* Bottom-up (not simple) deletion? */
-	int			bottomupfreespace;	/* Bottom-up space target */
-
-	/* Mutable per-TID information follows (index AM initializes entries) */
-	int			ndeltids;		/* Current # of deltids/status elements */
-	TM_IndexDelete *deltids;
-	TM_IndexStatus *status;
-} TM_IndexDeleteOp;
-
-/* "options" flag bits for table_tuple_insert */
-/* TABLE_INSERT_SKIP_WAL was 0x0001; RelationNeedsWAL() now governs */
-#define TABLE_INSERT_SKIP_FSM		0x0002
-#define TABLE_INSERT_FROZEN			0x0004
-#define TABLE_INSERT_NO_LOGICAL		0x0008
-
-/* flag bits for table_tuple_lock */
-/* Follow tuples whose update is in progress if lock modes don't conflict  */
-#define TUPLE_LOCK_FLAG_LOCK_UPDATE_IN_PROGRESS	(1 << 0)
-/* Follow update chain and lock latest version of tuple */
-#define TUPLE_LOCK_FLAG_FIND_LAST_VERSION		(1 << 1)
-
-
-/* Typedef for callback function for table_index_build_scan */
-typedef void (*IndexBuildCallback) (Relation index,
-									ItemPointer tid,
-									Datum *values,
-									bool *isnull,
-									bool tupleIsAlive,
-									void *state);
-
-/*
- * API struct for a table AM.  Note this must be allocated in a
- * server-lifetime manner, typically as a static const struct, which then gets
- * returned by FormData_pg_am.amhandler.
- *
- * In most cases it's not appropriate to call the callbacks directly, use the
- * table_* wrapper functions instead.
- *
- * GetTableAmRoutine() asserts that required callbacks are filled in, remember
- * to update when adding a callback.
- */
-typedef struct TableAmRoutine
-{
-	/* this must be set to T_TableAmRoutine */
-	NodeTag		type;
-
-
-	/* ------------------------------------------------------------------------
-	 * Slot related callbacks.
-	 * ------------------------------------------------------------------------
-	 */
-
-	/*
-	 * Return slot implementation suitable for storing a tuple of this AM.
-	 */
-	const TupleTableSlotOps *(*slot_callbacks) (Relation rel);
-
-
-	/* ------------------------------------------------------------------------
-	 * Table scan callbacks.
-	 * ------------------------------------------------------------------------
-	 */
-
-	/*
-	 * Start a scan of `rel`.  The callback has to return a TableScanDesc,
-	 * which will typically be embedded in a larger, AM specific, struct.
-	 *
-	 * If nkeys != 0, the results need to be filtered by those scan keys.
-	 *
-	 * pscan, if not NULL, will have already been initialized with
-	 * parallelscan_initialize(), and has to be for the same relation. Will
-	 * only be set coming from table_beginscan_parallel().
-	 *
-	 * `flags` is a bitmask indicating the type of scan (ScanOptions's
-	 * SO_TYPE_*, currently only one may be specified), options controlling
-	 * the scan's behaviour (ScanOptions's SO_ALLOW_*, several may be
-	 * specified, an AM may ignore unsupported ones) and whether the snapshot
-	 * needs to be deallocated at scan_end (ScanOptions's SO_TEMP_SNAPSHOT).
-	 */
-	TableScanDesc (*scan_begin) (Relation rel,
-								 Snapshot snapshot,
-								 int nkeys, struct ScanKeyData *key,
-								 ParallelTableScanDesc pscan,
-								 uint32 flags);
-
-	/*
-	 * Release resources and deallocate scan. If TableScanDesc.temp_snap,
-	 * TableScanDesc.rs_snapshot needs to be unregistered.
-	 */
-	void		(*scan_end) (TableScanDesc scan);
-
-	/*
-	 * Restart relation scan.  If set_params is set to true, allow_{strat,
-	 * sync, pagemode} (see scan_begin) changes should be taken into account.
-	 */
-	void		(*scan_rescan) (TableScanDesc scan, struct ScanKeyData *key,
-								bool set_params, bool allow_strat,
-								bool allow_sync, bool allow_pagemode);
-
-	/*
-	 * Return next tuple from `scan`, store in slot.
-	 */
-	bool		(*scan_getnextslot) (TableScanDesc scan,
-									 ScanDirection direction,
-									 TupleTableSlot *slot);
-
-	/*-----------
-	 * Optional functions to provide scanning for ranges of ItemPointers.
-	 * Implementations must either provide both of these functions, or neither
-	 * of them.
-	 *
-	 * Implementations of scan_set_tidrange must themselves handle
-	 * ItemPointers of any value. i.e, they must handle each of the following:
-	 *
-	 * 1) mintid or maxtid is beyond the end of the table; and
-	 * 2) mintid is above maxtid; and
-	 * 3) item offset for mintid or maxtid is beyond the maximum offset
-	 * allowed by the AM.
-	 *
-	 * Implementations can assume that scan_set_tidrange is always called
-	 * before scan_getnextslot_tidrange or after scan_rescan and before any
-	 * further calls to scan_getnextslot_tidrange.
-	 */
-	void		(*scan_set_tidrange) (TableScanDesc scan,
-									  ItemPointer mintid,
-									  ItemPointer maxtid);
-
-	/*
-	 * Return next tuple from `scan` that's in the range of TIDs defined by
-	 * scan_set_tidrange.
-	 */
-	bool		(*scan_getnextslot_tidrange) (TableScanDesc scan,
-											  ScanDirection direction,
-											  TupleTableSlot *slot);
-
-	/* ------------------------------------------------------------------------
-	 * Parallel table scan related functions.
-	 * ------------------------------------------------------------------------
-	 */
-
-	/*
-	 * Estimate the size of shared memory needed for a parallel scan of this
-	 * relation. The snapshot does not need to be accounted for.
-	 */
-	Size		(*parallelscan_estimate) (Relation rel);
-
-	/*
-	 * Initialize ParallelTableScanDesc for a parallel scan of this relation.
-	 * `pscan` will be sized according to parallelscan_estimate() for the same
-	 * relation.
-	 */
-	Size		(*parallelscan_initialize) (Relation rel,
-											ParallelTableScanDesc pscan);
-
-	/*
-	 * Reinitialize `pscan` for a new scan. `rel` will be the same relation as
-	 * when `pscan` was initialized by parallelscan_initialize.
-	 */
-	void		(*parallelscan_reinitialize) (Relation rel,
-											  ParallelTableScanDesc pscan);
-
-
-	/* ------------------------------------------------------------------------
-	 * Index Scan Callbacks
-	 * ------------------------------------------------------------------------
-	 */
-
-	/*
-	 * Prepare to fetch tuples from the relation, as needed when fetching
-	 * tuples for an index scan.  The callback has to return an
-	 * IndexFetchTableData, which the AM will typically embed in a larger
-	 * structure with additional information.
-	 *
-	 * Tuples for an index scan can then be fetched via index_fetch_tuple.
-	 */
-	struct IndexFetchTableData *(*index_fetch_begin) (Relation rel);
-
-	/*
-	 * Reset index fetch. Typically this will release cross index fetch
-	 * resources held in IndexFetchTableData.
-	 */
-	void		(*index_fetch_reset) (struct IndexFetchTableData *data);
-
-	/*
-	 * Release resources and deallocate index fetch.
-	 */
-	void		(*index_fetch_end) (struct IndexFetchTableData *data);
-
-	/*
-	 * Fetch tuple at `tid` into `slot`, after doing a visibility test
-	 * according to `snapshot`. If a tuple was found and passed the visibility
-	 * test, return true, false otherwise.
-	 *
-	 * Note that AMs that do not necessarily update indexes when indexed
-	 * columns do not change, need to return the current/correct version of
-	 * the tuple that is visible to the snapshot, even if the tid points to an
-	 * older version of the tuple.
-	 *
-	 * *call_again is false on the first call to index_fetch_tuple for a tid.
-	 * If there potentially is another tuple matching the tid, *call_again
-	 * needs to be set to true by index_fetch_tuple, signaling to the caller
-	 * that index_fetch_tuple should be called again for the same tid.
-	 *
-	 * *all_dead, if all_dead is not NULL, should be set to true by
-	 * index_fetch_tuple iff it is guaranteed that no backend needs to see
-	 * that tuple. Index AMs can use that to avoid returning that tid in
-	 * future searches.
-	 */
-	bool		(*index_fetch_tuple) (struct IndexFetchTableData *scan,
-									  ItemPointer tid,
-									  Snapshot snapshot,
-									  TupleTableSlot *slot,
-									  bool *call_again, bool *all_dead);
-
-
-	/* ------------------------------------------------------------------------
-	 * Callbacks for non-modifying operations on individual tuples
-	 * ------------------------------------------------------------------------
-	 */
-
-	/*
-	 * Fetch tuple at `tid` into `slot`, after doing a visibility test
-	 * according to `snapshot`. If a tuple was found and passed the visibility
-	 * test, returns true, false otherwise.
-	 */
-	bool		(*tuple_fetch_row_version) (Relation rel,
-											ItemPointer tid,
-											Snapshot snapshot,
-											TupleTableSlot *slot);
-
-	/*
-	 * Is tid valid for a scan of this relation.
-	 */
-	bool		(*tuple_tid_valid) (TableScanDesc scan,
-									ItemPointer tid);
-
-	/*
-	 * Return the latest version of the tuple at `tid`, by updating `tid` to
-	 * point at the newest version.
-	 */
-	void		(*tuple_get_latest_tid) (TableScanDesc scan,
-										 ItemPointer tid);
-
-	/*
-	 * Does the tuple in `slot` satisfy `snapshot`?  The slot needs to be of
-	 * the appropriate type for the AM.
-	 */
-	bool		(*tuple_satisfies_snapshot) (Relation rel,
-											 TupleTableSlot *slot,
-											 Snapshot snapshot);
-
-	/* see table_index_delete_tuples() */
-	TransactionId (*index_delete_tuples) (Relation rel,
-										  TM_IndexDeleteOp *delstate);
-
-
-	/* ------------------------------------------------------------------------
-	 * Manipulations of physical tuples.
-	 * ------------------------------------------------------------------------
-	 */
-
-	/* see table_tuple_insert() for reference about parameters */
-	void		(*tuple_insert) (Relation rel, TupleTableSlot *slot,
-								 CommandId cid, int options,
-								 struct BulkInsertStateData *bistate);
-
-	/* see table_tuple_insert_speculative() for reference about parameters */
-	void		(*tuple_insert_speculative) (Relation rel,
-											 TupleTableSlot *slot,
-											 CommandId cid,
-											 int options,
-											 struct BulkInsertStateData *bistate,
-											 uint32 specToken);
-
-	/* see table_tuple_complete_speculative() for reference about parameters */
-	void		(*tuple_complete_speculative) (Relation rel,
-											   TupleTableSlot *slot,
-											   uint32 specToken,
-											   bool succeeded);
-
-	/* see table_multi_insert() for reference about parameters */
-	void		(*multi_insert) (Relation rel, TupleTableSlot **slots, int nslots,
-								 CommandId cid, int options, struct BulkInsertStateData *bistate);
-
-	/* see table_tuple_delete() for reference about parameters */
-	TM_Result	(*tuple_delete) (Relation rel,
-								 ItemPointer tid,
-								 CommandId cid,
-								 Snapshot snapshot,
-								 Snapshot crosscheck,
-								 bool wait,
-								 TM_FailureData *tmfd,
-								 bool changingPart);
-
-	/* see table_tuple_update() for reference about parameters */
-	TM_Result	(*tuple_update) (Relation rel,
-								 ItemPointer otid,
-								 TupleTableSlot *slot,
-								 CommandId cid,
-								 Snapshot snapshot,
-								 Snapshot crosscheck,
-								 bool wait,
-								 TM_FailureData *tmfd,
-								 LockTupleMode *lockmode,
-								 TU_UpdateIndexes *update_indexes);
-
-	/* see table_tuple_lock() for reference about parameters */
-	TM_Result	(*tuple_lock) (Relation rel,
-							   ItemPointer tid,
-							   Snapshot snapshot,
-							   TupleTableSlot *slot,
-							   CommandId cid,
-							   LockTupleMode mode,
-							   LockWaitPolicy wait_policy,
-							   uint8 flags,
-							   TM_FailureData *tmfd);
-
-	/*
-	 * Perform operations necessary to complete insertions made via
-	 * tuple_insert and multi_insert with a BulkInsertState specified. In-tree
-	 * access methods ceased to use this.
-	 *
-	 * Typically callers of tuple_insert and multi_insert will just pass all
-	 * the flags that apply to them, and each AM has to decide which of them
-	 * make sense for it, and then only take actions in finish_bulk_insert for
-	 * those flags, and ignore others.
-	 *
-	 * Optional callback.
-	 */
-	void		(*finish_bulk_insert) (Relation rel, int options);
-
-
-	/* ------------------------------------------------------------------------
-	 * DDL related functionality.
-	 * ------------------------------------------------------------------------
-	 */
-
-	/*
-	 * This callback needs to create new relation storage for `rel`, with
-	 * appropriate durability behaviour for `persistence`.
-	 *
-	 * Note that only the subset of the relcache filled by
-	 * RelationBuildLocalRelation() can be relied upon and that the relation's
-	 * catalog entries will either not yet exist (new relation), or will still
-	 * reference the old relfilelocator.
-	 *
-	 * As output *freezeXid, *minmulti must be set to the values appropriate
-	 * for pg_class.{relfrozenxid, relminmxid}. For AMs that don't need those
-	 * fields to be filled they can be set to InvalidTransactionId and
-	 * InvalidMultiXactId, respectively.
-	 *
-	 * See also table_relation_set_new_filelocator().
-	 */
-	void		(*relation_set_new_filelocator) (Relation rel,
-												 const RelFileLocator *newrlocator,
-												 char persistence,
-												 TransactionId *freezeXid,
-												 MultiXactId *minmulti);
-
-	/*
-	 * This callback needs to remove all contents from `rel`'s current
-	 * relfilelocator. No provisions for transactional behaviour need to be
-	 * made.  Often this can be implemented by truncating the underlying
-	 * storage to its minimal size.
-	 *
-	 * See also table_relation_nontransactional_truncate().
-	 */
-	void		(*relation_nontransactional_truncate) (Relation rel);
-
-	/*
-	 * See table_relation_copy_data().
-	 *
-	 * This can typically be implemented by directly copying the underlying
-	 * storage, unless it contains references to the tablespace internally.
-	 */
-	void		(*relation_copy_data) (Relation rel,
-									   const RelFileLocator *newrlocator);
-
-	/* See table_relation_copy_for_cluster() */
-	void		(*relation_copy_for_cluster) (Relation NewTable,
-											  Relation OldTable,
-											  Relation OldIndex,
-											  bool use_sort,
-											  TransactionId OldestXmin,
-											  TransactionId *xid_cutoff,
-											  MultiXactId *multi_cutoff,
-											  double *num_tuples,
-											  double *tups_vacuumed,
-											  double *tups_recently_dead);
-
-	/*
-	 * React to VACUUM command on the relation. The VACUUM can be triggered by
-	 * a user or by autovacuum. The specific actions performed by the AM will
-	 * depend heavily on the individual AM.
-	 *
-	 * On entry a transaction is already established, and the relation is
-	 * locked with a ShareUpdateExclusive lock.
-	 *
-	 * Note that neither VACUUM FULL (and CLUSTER), nor ANALYZE go through
-	 * this routine, even if (for ANALYZE) it is part of the same VACUUM
-	 * command.
-	 *
-	 * There probably, in the future, needs to be a separate callback to
-	 * integrate with autovacuum's scheduling.
-	 */
-	void		(*relation_vacuum) (Relation rel,
-									struct VacuumParams *params,
-									BufferAccessStrategy bstrategy);
-
-	/*
-	 * Prepare to analyze block `blockno` of `scan`. The scan has been started
-	 * with table_beginscan_analyze().  See also
-	 * table_scan_analyze_next_block().
-	 *
-	 * The callback may acquire resources like locks that are held until
-	 * table_scan_analyze_next_tuple() returns false. It e.g. can make sense
-	 * to hold a lock until all tuples on a block have been analyzed by
-	 * scan_analyze_next_tuple.
-	 *
-	 * The callback can return false if the block is not suitable for
-	 * sampling, e.g. because it's a metapage that could never contain tuples.
-	 *
-	 * XXX: This obviously is primarily suited for block-based AMs. It's not
-	 * clear what a good interface for non block based AMs would be, so there
-	 * isn't one yet.
-	 */
-	bool		(*scan_analyze_next_block) (TableScanDesc scan,
-											BlockNumber blockno,
-											BufferAccessStrategy bstrategy);
-
-	/*
-	 * See table_scan_analyze_next_tuple().
-	 *
-	 * Not every AM might have a meaningful concept of dead rows, in which
-	 * case it's OK to not increment *deadrows - but note that that may
-	 * influence autovacuum scheduling (see comment for relation_vacuum
-	 * callback).
-	 */
-	bool		(*scan_analyze_next_tuple) (TableScanDesc scan,
-											TransactionId OldestXmin,
-											double *liverows,
-											double *deadrows,
-											TupleTableSlot *slot);
-
-	/* see table_index_build_range_scan for reference about parameters */
-	double		(*index_build_range_scan) (Relation table_rel,
-										   Relation index_rel,
-										   struct IndexInfo *index_info,
-										   bool allow_sync,
-										   bool anyvisible,
-										   bool progress,
-										   BlockNumber start_blockno,
-										   BlockNumber numblocks,
-										   IndexBuildCallback callback,
-										   void *callback_state,
-										   TableScanDesc scan);
-
-	/* see table_index_validate_scan for reference about parameters */
-	void		(*index_validate_scan) (Relation table_rel,
-										Relation index_rel,
-										struct IndexInfo *index_info,
-										Snapshot snapshot,
-										struct ValidateIndexState *state);
-
-
-	/* ------------------------------------------------------------------------
-	 * Miscellaneous functions.
-	 * ------------------------------------------------------------------------
-	 */
-
-	/*
-	 * See table_relation_size().
-	 *
-	 * Note that currently a few callers use the MAIN_FORKNUM size to figure
-	 * out the range of potentially interesting blocks (brin, analyze). It's
-	 * probable that we'll need to revise the interface for those at some
-	 * point.
-	 */
-	uint64		(*relation_size) (Relation rel, ForkNumber forkNumber);
-
-
-	/*
-	 * This callback should return true if the relation requires a TOAST table
-	 * and false if it does not.  It may wish to examine the relation's tuple
-	 * descriptor before making a decision, but if it uses some other method
-	 * of storing large values (or if it does not support them) it can simply
-	 * return false.
-	 */
-	bool		(*relation_needs_toast_table) (Relation rel);
-
-	/*
-	 * This callback should return the OID of the table AM that implements
-	 * TOAST tables for this AM.  If the relation_needs_toast_table callback
-	 * always returns false, this callback is not required.
-	 */
-	Oid			(*relation_toast_am) (Relation rel);
-
-	/*
-	 * This callback is invoked when detoasting a value stored in a toast
-	 * table implemented by this AM.  See table_relation_fetch_toast_slice()
-	 * for more details.
-	 */
-	void		(*relation_fetch_toast_slice) (Relation toastrel, Oid valueid,
-											   int32 attrsize,
-											   int32 sliceoffset,
-											   int32 slicelength,
-											   struct varlena *result);
-
-
-	/* ------------------------------------------------------------------------
-	 * Planner related functions.
-	 * ------------------------------------------------------------------------
-	 */
-
-	/*
-	 * See table_relation_estimate_size().
-	 *
-	 * While block oriented, it shouldn't be too hard for an AM that doesn't
-	 * internally use blocks to convert into a usable representation.
-	 *
-	 * This differs from the relation_size callback by returning size
-	 * estimates (both relation size and tuple count) for planning purposes,
-	 * rather than returning a currently correct estimate.
-	 */
-	void		(*relation_estimate_size) (Relation rel, int32 *attr_widths,
-										   BlockNumber *pages, double *tuples,
-										   double *allvisfrac);
-
-
-	/* ------------------------------------------------------------------------
-	 * Executor related functions.
-	 * ------------------------------------------------------------------------
-	 */
-
-	/*
-	 * Prepare to fetch / check / return tuples from `tbmres->blockno` as part
-	 * of a bitmap table scan. `scan` was started via table_beginscan_bm().
-	 * Return false if there are no tuples to be found on the page, true
-	 * otherwise.
-	 *
-	 * This will typically read and pin the target block, and do the necessary
-	 * work to allow scan_bitmap_next_tuple() to return tuples (e.g. it might
-	 * make sense to perform tuple visibility checks at this time). For some
-	 * AMs it will make more sense to do all the work referencing `tbmres`
-	 * contents here, for others it might be better to defer more work to
-	 * scan_bitmap_next_tuple.
-	 *
-	 * If `tbmres->blockno` is -1, this is a lossy scan and all visible tuples
-	 * on the page have to be returned, otherwise the tuples at offsets in
-	 * `tbmres->offsets` need to be returned.
-	 *
-	 * XXX: Currently this may only be implemented if the AM uses md.c as its
-	 * storage manager, and uses ItemPointer->ip_blkid in a manner that maps
-	 * blockids directly to the underlying storage. nodeBitmapHeapscan.c
-	 * performs prefetching directly using that interface.  This probably
-	 * needs to be rectified at a later point.
-	 *
-	 * XXX: Currently this may only be implemented if the AM uses the
-	 * visibilitymap, as nodeBitmapHeapscan.c unconditionally accesses it to
-	 * perform prefetching.  This probably needs to be rectified at a later
-	 * point.
-	 *
-	 * Optional callback, but either both scan_bitmap_next_block and
-	 * scan_bitmap_next_tuple need to exist, or neither.
-	 */
-	bool		(*scan_bitmap_next_block) (TableScanDesc scan,
-										   struct TBMIterateResult *tbmres);
-
-	/*
-	 * Fetch the next tuple of a bitmap table scan into `slot` and return true
-	 * if a visible tuple was found, false otherwise.
-	 *
-	 * For some AMs it will make more sense to do all the work referencing
-	 * `tbmres` contents in scan_bitmap_next_block, for others it might be
-	 * better to defer more work to this callback.
-	 *
-	 * Optional callback, but either both scan_bitmap_next_block and
-	 * scan_bitmap_next_tuple need to exist, or neither.
-	 */
-	bool		(*scan_bitmap_next_tuple) (TableScanDesc scan,
-										   struct TBMIterateResult *tbmres,
-										   TupleTableSlot *slot);
-
-	/*
-	 * Prepare to fetch tuples from the next block in a sample scan. Return
-	 * false if the sample scan is finished, true otherwise. `scan` was
-	 * started via table_beginscan_sampling().
-	 *
-	 * Typically this will first determine the target block by calling the
-	 * TsmRoutine's NextSampleBlock() callback if not NULL, or alternatively
-	 * perform a sequential scan over all blocks.  The determined block is
-	 * then typically read and pinned.
-	 *
-	 * As the TsmRoutine interface is block based, a block needs to be passed
-	 * to NextSampleBlock(). If that's not appropriate for an AM, it
-	 * internally needs to perform mapping between the internal and a block
-	 * based representation.
-	 *
-	 * Note that it's not acceptable to hold deadlock prone resources such as
-	 * lwlocks until scan_sample_next_tuple() has exhausted the tuples on the
-	 * block - the tuple is likely to be returned to an upper query node, and
-	 * the next call could be off a long while. Holding buffer pins and such
-	 * is obviously OK.
-	 *
-	 * Currently it is required to implement this interface, as there's no
-	 * alternative way (contrary e.g. to bitmap scans) to implement sample
-	 * scans. If infeasible to implement, the AM may raise an error.
-	 */
-	bool		(*scan_sample_next_block) (TableScanDesc scan,
-										   struct SampleScanState *scanstate);
-
-	/*
-	 * This callback, only called after scan_sample_next_block has returned
-	 * true, should determine the next tuple to be returned from the selected
-	 * block using the TsmRoutine's NextSampleTuple() callback.
-	 *
-	 * The callback needs to perform visibility checks, and only return
-	 * visible tuples. That obviously can mean calling NextSampleTuple()
-	 * multiple times.
-	 *
-	 * The TsmRoutine interface assumes that there's a maximum offset on a
-	 * given page, so if that doesn't apply to an AM, it needs to emulate that
-	 * assumption somehow.
-	 */
-	bool		(*scan_sample_next_tuple) (TableScanDesc scan,
-										   struct SampleScanState *scanstate,
-										   TupleTableSlot *slot);
-
-} TableAmRoutine;
-
-
-/* ----------------------------------------------------------------------------
- * Slot functions.
- * ----------------------------------------------------------------------------
- */
-
-/*
- * Returns slot callbacks suitable for holding tuples of the appropriate type
- * for the relation.  Works for tables, views, foreign tables and partitioned
- * tables.
- */
-extern const TupleTableSlotOps *table_slot_callbacks(Relation relation);
-
-/*
- * Returns slot using the callbacks returned by table_slot_callbacks(), and
- * registers it on *reglist.
- */
-extern TupleTableSlot *table_slot_create(Relation relation, List **reglist);
-
-
-/* ----------------------------------------------------------------------------
- * Table scan functions.
- * ----------------------------------------------------------------------------
- */
-
-/*
- * Start a scan of `rel`. Returned tuples pass a visibility test of
- * `snapshot`, and if nkeys != 0, the results are filtered by those scan keys.
- */
-static inline TableScanDesc
-table_beginscan(Relation rel, Snapshot snapshot,
-				int nkeys, struct ScanKeyData *key)
-{
-	uint32		flags = SO_TYPE_SEQSCAN |
-		SO_ALLOW_STRAT | SO_ALLOW_SYNC | SO_ALLOW_PAGEMODE;
-
-	return rel->rd_tableam->scan_begin(rel, snapshot, nkeys, key, NULL, flags);
-}
-
-/*
- * Like table_beginscan(), but for scanning catalog. It'll automatically use a
- * snapshot appropriate for scanning catalog relations.
- */
-extern TableScanDesc table_beginscan_catalog(Relation relation, int nkeys,
-											 struct ScanKeyData *key);
-
-/*
- * Like table_beginscan(), but table_beginscan_strat() offers an extended API
- * that lets the caller control whether a nondefault buffer access strategy
- * can be used, and whether syncscan can be chosen (possibly resulting in the
- * scan not starting from block zero).  Both of these default to true with
- * plain table_beginscan.
- */
-static inline TableScanDesc
-table_beginscan_strat(Relation rel, Snapshot snapshot,
-					  int nkeys, struct ScanKeyData *key,
-					  bool allow_strat, bool allow_sync)
-{
-	uint32		flags = SO_TYPE_SEQSCAN | SO_ALLOW_PAGEMODE;
-
-	if (allow_strat)
-		flags |= SO_ALLOW_STRAT;
-	if (allow_sync)
-		flags |= SO_ALLOW_SYNC;
-
-	return rel->rd_tableam->scan_begin(rel, snapshot, nkeys, key, NULL, flags);
-}
-
-/*
- * table_beginscan_bm is an alternative entry point for setting up a
- * TableScanDesc for a bitmap heap scan.  Although that scan technology is
- * really quite unlike a standard seqscan, there is just enough commonality to
- * make it worth using the same data structure.
- */
-static inline TableScanDesc
-table_beginscan_bm(Relation rel, Snapshot snapshot,
-				   int nkeys, struct ScanKeyData *key)
-{
-	uint32		flags = SO_TYPE_BITMAPSCAN | SO_ALLOW_PAGEMODE;
-
-	return rel->rd_tableam->scan_begin(rel, snapshot, nkeys, key, NULL, flags);
-}
-
-/*
- * table_beginscan_sampling is an alternative entry point for setting up a
- * TableScanDesc for a TABLESAMPLE scan.  As with bitmap scans, it's worth
- * using the same data structure although the behavior is rather different.
- * In addition to the options offered by table_beginscan_strat, this call
- * also allows control of whether page-mode visibility checking is used.
- */
-static inline TableScanDesc
-table_beginscan_sampling(Relation rel, Snapshot snapshot,
-						 int nkeys, struct ScanKeyData *key,
-						 bool allow_strat, bool allow_sync,
-						 bool allow_pagemode)
-{
-	uint32		flags = SO_TYPE_SAMPLESCAN;
-
-	if (allow_strat)
-		flags |= SO_ALLOW_STRAT;
-	if (allow_sync)
-		flags |= SO_ALLOW_SYNC;
-	if (allow_pagemode)
-		flags |= SO_ALLOW_PAGEMODE;
-
-	return rel->rd_tableam->scan_begin(rel, snapshot, nkeys, key, NULL, flags);
-}
-
-/*
- * table_beginscan_tid is an alternative entry point for setting up a
- * TableScanDesc for a Tid scan. As with bitmap scans, it's worth using
- * the same data structure although the behavior is rather different.
- */
-static inline TableScanDesc
-table_beginscan_tid(Relation rel, Snapshot snapshot)
-{
-	uint32		flags = SO_TYPE_TIDSCAN;
-
-	return rel->rd_tableam->scan_begin(rel, snapshot, 0, NULL, NULL, flags);
-}
-
-/*
- * table_beginscan_analyze is an alternative entry point for setting up a
- * TableScanDesc for an ANALYZE scan.  As with bitmap scans, it's worth using
- * the same data structure although the behavior is rather different.
- */
-static inline TableScanDesc
-table_beginscan_analyze(Relation rel)
-{
-	uint32		flags = SO_TYPE_ANALYZE;
-
-	return rel->rd_tableam->scan_begin(rel, NULL, 0, NULL, NULL, flags);
-}
-
-/*
- * End relation scan.
- */
-static inline void
-table_endscan(TableScanDesc scan)
-{
-	scan->rs_rd->rd_tableam->scan_end(scan);
-}
-
-/*
- * Restart a relation scan.
- */
-static inline void
-table_rescan(TableScanDesc scan,
-			 struct ScanKeyData *key)
-{
-	scan->rs_rd->rd_tableam->scan_rescan(scan, key, false, false, false, false);
-}
-
-/*
- * Restart a relation scan after changing params.
- *
- * This call allows changing the buffer strategy, syncscan, and pagemode
- * options before starting a fresh scan.  Note that although the actual use of
- * syncscan might change (effectively, enabling or disabling reporting), the
- * previously selected startblock will be kept.
- */
-static inline void
-table_rescan_set_params(TableScanDesc scan, struct ScanKeyData *key,
-						bool allow_strat, bool allow_sync, bool allow_pagemode)
-{
-	scan->rs_rd->rd_tableam->scan_rescan(scan, key, true,
-										 allow_strat, allow_sync,
-										 allow_pagemode);
-}
-
-/*
- * Update snapshot used by the scan.
- */
-extern void table_scan_update_snapshot(TableScanDesc scan, Snapshot snapshot);
-
-/*
- * Return next tuple from `scan`, store in slot.
- */
-static inline bool
-table_scan_getnextslot(TableScanDesc sscan, ScanDirection direction, TupleTableSlot *slot)
-{
-	slot->tts_tableOid = RelationGetRelid(sscan->rs_rd);
-
-	/* We don't expect actual scans using NoMovementScanDirection */
-	Assert(direction == ForwardScanDirection ||
-		   direction == BackwardScanDirection);
-
-	/*
-	 * We don't expect direct calls to table_scan_getnextslot with valid
-	 * CheckXidAlive for catalog or regular tables.  See detailed comments in
-	 * xact.c where these variables are declared.
-	 */
-	if (unlikely(TransactionIdIsValid(CheckXidAlive) && !bsysscan))
-		elog(ERROR, "unexpected table_scan_getnextslot call during logical decoding");
-
-	return sscan->rs_rd->rd_tableam->scan_getnextslot(sscan, direction, slot);
-}
-
-/* ----------------------------------------------------------------------------
- * TID Range scanning related functions.
- * ----------------------------------------------------------------------------
- */
-
-/*
- * table_beginscan_tidrange is the entry point for setting up a TableScanDesc
- * for a TID range scan.
- */
-static inline TableScanDesc
-table_beginscan_tidrange(Relation rel, Snapshot snapshot,
-						 ItemPointer mintid,
-						 ItemPointer maxtid)
-{
-	TableScanDesc sscan;
-	uint32		flags = SO_TYPE_TIDRANGESCAN | SO_ALLOW_PAGEMODE;
-
-	sscan = rel->rd_tableam->scan_begin(rel, snapshot, 0, NULL, NULL, flags);
-
-	/* Set the range of TIDs to scan */
-	sscan->rs_rd->rd_tableam->scan_set_tidrange(sscan, mintid, maxtid);
-
-	return sscan;
-}
-
-/*
- * table_rescan_tidrange resets the scan position and sets the minimum and
- * maximum TID range to scan for a TableScanDesc created by
- * table_beginscan_tidrange.
- */
-static inline void
-table_rescan_tidrange(TableScanDesc sscan, ItemPointer mintid,
-					  ItemPointer maxtid)
-{
-	/* Ensure table_beginscan_tidrange() was used. */
-	Assert((sscan->rs_flags & SO_TYPE_TIDRANGESCAN) != 0);
-
-	sscan->rs_rd->rd_tableam->scan_rescan(sscan, NULL, false, false, false, false);
-	sscan->rs_rd->rd_tableam->scan_set_tidrange(sscan, mintid, maxtid);
-}
-
-/*
- * Fetch the next tuple from `sscan` for a TID range scan created by
- * table_beginscan_tidrange().  Stores the tuple in `slot` and returns true,
- * or returns false if no more tuples exist in the range.
- */
-static inline bool
-table_scan_getnextslot_tidrange(TableScanDesc sscan, ScanDirection direction,
-								TupleTableSlot *slot)
-{
-	/* Ensure table_beginscan_tidrange() was used. */
-	Assert((sscan->rs_flags & SO_TYPE_TIDRANGESCAN) != 0);
-
-	/* We don't expect actual scans using NoMovementScanDirection */
-	Assert(direction == ForwardScanDirection ||
-		   direction == BackwardScanDirection);
-
-	return sscan->rs_rd->rd_tableam->scan_getnextslot_tidrange(sscan,
-															   direction,
-															   slot);
-}
-
-
-/* ----------------------------------------------------------------------------
- * Parallel table scan related functions.
- * ----------------------------------------------------------------------------
- */
-
-/*
- * Estimate the size of shared memory needed for a parallel scan of this
- * relation.
- */
-extern Size table_parallelscan_estimate(Relation rel, Snapshot snapshot);
-
-/*
- * Initialize ParallelTableScanDesc for a parallel scan of this
- * relation. `pscan` needs to be sized according to parallelscan_estimate()
- * for the same relation.  Call this just once in the leader process; then,
- * individual workers attach via table_beginscan_parallel.
- */
-extern void table_parallelscan_initialize(Relation rel,
-										  ParallelTableScanDesc pscan,
-										  Snapshot snapshot);
-
-/*
- * Begin a parallel scan. `pscan` needs to have been initialized with
- * table_parallelscan_initialize(), for the same relation. The initialization
- * does not need to have happened in this backend.
- *
- * Caller must hold a suitable lock on the relation.
- */
-extern TableScanDesc table_beginscan_parallel(Relation relation,
-											  ParallelTableScanDesc pscan);
-
-/*
- * Restart a parallel scan.  Call this in the leader process.  Caller is
- * responsible for making sure that all workers have finished the scan
- * beforehand.
- */
-static inline void
-table_parallelscan_reinitialize(Relation rel, ParallelTableScanDesc pscan)
-{
-	rel->rd_tableam->parallelscan_reinitialize(rel, pscan);
-}
-
-
-/* ----------------------------------------------------------------------------
- *  Index scan related functions.
- * ----------------------------------------------------------------------------
- */
-
-/*
- * Prepare to fetch tuples from the relation, as needed when fetching tuples
- * for an index scan.
- *
- * Tuples for an index scan can then be fetched via table_index_fetch_tuple().
- */
-static inline IndexFetchTableData *
-table_index_fetch_begin(Relation rel)
-{
-	return rel->rd_tableam->index_fetch_begin(rel);
-}
-
-/*
- * Reset index fetch. Typically this will release cross index fetch resources
- * held in IndexFetchTableData.
- */
-static inline void
-table_index_fetch_reset(struct IndexFetchTableData *scan)
-{
-	scan->rel->rd_tableam->index_fetch_reset(scan);
-}
-
-/*
- * Release resources and deallocate index fetch.
- */
-static inline void
-table_index_fetch_end(struct IndexFetchTableData *scan)
-{
-	scan->rel->rd_tableam->index_fetch_end(scan);
-}
-
-/*
- * Fetches, as part of an index scan, tuple at `tid` into `slot`, after doing
- * a visibility test according to `snapshot`. If a tuple was found and passed
- * the visibility test, returns true, false otherwise. Note that *tid may be
- * modified when we return true (see later remarks on multiple row versions
- * reachable via a single index entry).
- *
- * *call_again needs to be false on the first call to table_index_fetch_tuple() for
- * a tid. If there potentially is another tuple matching the tid, *call_again
- * will be set to true, signaling that table_index_fetch_tuple() should be called
- * again for the same tid.
- *
- * *all_dead, if all_dead is not NULL, will be set to true by
- * table_index_fetch_tuple() iff it is guaranteed that no backend needs to see
- * that tuple. Index AMs can use that to avoid returning that tid in future
- * searches.
- *
- * The difference between this function and table_tuple_fetch_row_version()
- * is that this function returns the currently visible version of a row if
- * the AM supports storing multiple row versions reachable via a single index
- * entry (like heap's HOT). Whereas table_tuple_fetch_row_version() only
- * evaluates the tuple exactly at `tid`. Outside of index entry ->table tuple
- * lookups, table_tuple_fetch_row_version() is what's usually needed.
- */
-static inline bool
-table_index_fetch_tuple(struct IndexFetchTableData *scan,
-						ItemPointer tid,
-						Snapshot snapshot,
-						TupleTableSlot *slot,
-						bool *call_again, bool *all_dead)
-{
-	/*
-	 * We don't expect direct calls to table_index_fetch_tuple with valid
-	 * CheckXidAlive for catalog or regular tables.  See detailed comments in
-	 * xact.c where these variables are declared.
-	 */
-	if (unlikely(TransactionIdIsValid(CheckXidAlive) && !bsysscan))
-		elog(ERROR, "unexpected table_index_fetch_tuple call during logical decoding");
-
-	return scan->rel->rd_tableam->index_fetch_tuple(scan, tid, snapshot,
-													slot, call_again,
-													all_dead);
-}
-
-/*
- * This is a convenience wrapper around table_index_fetch_tuple() which
- * returns whether there are table tuple items corresponding to an index
- * entry.  This likely is only useful to verify if there's a conflict in a
- * unique index.
- */
-extern bool table_index_fetch_tuple_check(Relation rel,
-										  ItemPointer tid,
-										  Snapshot snapshot,
-										  bool *all_dead);
-
-
-/* ------------------------------------------------------------------------
- * Functions for non-modifying operations on individual tuples
- * ------------------------------------------------------------------------
- */
-
-
-/*
- * Fetch tuple at `tid` into `slot`, after doing a visibility test according to
- * `snapshot`. If a tuple was found and passed the visibility test, returns
- * true, false otherwise.
- *
- * See table_index_fetch_tuple's comment about what the difference between
- * these functions is. It is correct to use this function outside of index
- * entry->table tuple lookups.
- */
-static inline bool
-table_tuple_fetch_row_version(Relation rel,
-							  ItemPointer tid,
-							  Snapshot snapshot,
-							  TupleTableSlot *slot)
-{
-	/*
-	 * We don't expect direct calls to table_tuple_fetch_row_version with
-	 * valid CheckXidAlive for catalog or regular tables.  See detailed
-	 * comments in xact.c where these variables are declared.
-	 */
-	if (unlikely(TransactionIdIsValid(CheckXidAlive) && !bsysscan))
-		elog(ERROR, "unexpected table_tuple_fetch_row_version call during logical decoding");
-
-	return rel->rd_tableam->tuple_fetch_row_version(rel, tid, snapshot, slot);
-}
-
-/*
- * Verify that `tid` is a potentially valid tuple identifier. That doesn't
- * mean that the pointed to row needs to exist or be visible, but that
- * attempting to fetch the row (e.g. with table_tuple_get_latest_tid() or
- * table_tuple_fetch_row_version()) should not error out if called with that
- * tid.
- *
- * `scan` needs to have been started via table_beginscan().
- */
-static inline bool
-table_tuple_tid_valid(TableScanDesc scan, ItemPointer tid)
-{
-	return scan->rs_rd->rd_tableam->tuple_tid_valid(scan, tid);
-}
-
-/*
- * Return the latest version of the tuple at `tid`, by updating `tid` to
- * point at the newest version.
- */
-extern void table_tuple_get_latest_tid(TableScanDesc scan, ItemPointer tid);
-
-/*
- * Return true iff tuple in slot satisfies the snapshot.
- *
- * This assumes the slot's tuple is valid, and of the appropriate type for the
- * AM.
- *
- * Some AMs might modify the data underlying the tuple as a side-effect. If so
- * they ought to mark the relevant buffer dirty.
- */
-static inline bool
-table_tuple_satisfies_snapshot(Relation rel, TupleTableSlot *slot,
-							   Snapshot snapshot)
-{
-	return rel->rd_tableam->tuple_satisfies_snapshot(rel, slot, snapshot);
-}
-
-/*
- * Determine which index tuples are safe to delete based on their table TID.
- *
- * Determines which entries from index AM caller's TM_IndexDeleteOp state
- * point to vacuumable table tuples.  Entries that are found by tableam to be
- * vacuumable are naturally safe for index AM to delete, and so get directly
- * marked as deletable.  See comments above TM_IndexDelete and comments above
- * TM_IndexDeleteOp for full details.
- *
- * Returns a snapshotConflictHorizon transaction ID that caller places in
- * its index deletion WAL record.  This might be used during subsequent REDO
- * of the WAL record when in Hot Standby mode -- a recovery conflict for the
- * index deletion operation might be required on the standby.
- */
-static inline TransactionId
-table_index_delete_tuples(Relation rel, TM_IndexDeleteOp *delstate)
-{
-	return rel->rd_tableam->index_delete_tuples(rel, delstate);
-}
-
-
-/* ----------------------------------------------------------------------------
- *  Functions for manipulations of physical tuples.
- * ----------------------------------------------------------------------------
- */
-
-/*
- * Insert a tuple from a slot into table AM routine.
- *
- * The options bitmask allows the caller to specify options that may change the
- * behaviour of the AM. The AM will ignore options that it does not support.
- *
- * If the TABLE_INSERT_SKIP_FSM option is specified, AMs are free to not reuse
- * free space in the relation. This can save some cycles when we know the
- * relation is new and doesn't contain useful amounts of free space.
- * TABLE_INSERT_SKIP_FSM is commonly passed directly to
- * RelationGetBufferForTuple. See that method for more information.
- *
- * TABLE_INSERT_FROZEN should only be specified for inserts into
- * relation storage created during the current subtransaction and when
- * there are no prior snapshots or pre-existing portals open.
- * This causes rows to be frozen, which is an MVCC violation and
- * requires explicit options chosen by user.
- *
- * TABLE_INSERT_NO_LOGICAL force-disables the emitting of logical decoding
- * information for the tuple. This should solely be used during table rewrites
- * where RelationIsLogicallyLogged(relation) is not yet accurate for the new
- * relation.
- *
- * Note that most of these options will be applied when inserting into the
- * heap's TOAST table, too, if the tuple requires any out-of-line data.
- *
- * The BulkInsertState object (if any; bistate can be NULL for default
- * behavior) is also just passed through to RelationGetBufferForTuple. If
- * `bistate` is provided, table_finish_bulk_insert() needs to be called.
- *
- * On return the slot's tts_tid and tts_tableOid are updated to reflect the
- * insertion. But note that any toasting of fields within the slot is NOT
- * reflected in the slots contents.
- */
-static inline void
-table_tuple_insert(Relation rel, TupleTableSlot *slot, CommandId cid,
-				   int options, struct BulkInsertStateData *bistate)
-{
-	rel->rd_tableam->tuple_insert(rel, slot, cid, options,
-								  bistate);
-}
-
-/*
- * Perform a "speculative insertion". These can be backed out afterwards
- * without aborting the whole transaction.  Other sessions can wait for the
- * speculative insertion to be confirmed, turning it into a regular tuple, or
- * aborted, as if it never existed.  Speculatively inserted tuples behave as
- * "value locks" of short duration, used to implement INSERT .. ON CONFLICT.
- *
- * A transaction having performed a speculative insertion has to either abort,
- * or finish the speculative insertion with
- * table_tuple_complete_speculative(succeeded = ...).
- */
-static inline void
-table_tuple_insert_speculative(Relation rel, TupleTableSlot *slot,
-							   CommandId cid, int options,
-							   struct BulkInsertStateData *bistate,
-							   uint32 specToken)
-{
-	rel->rd_tableam->tuple_insert_speculative(rel, slot, cid, options,
-											  bistate, specToken);
-}
-
-/*
- * Complete "speculative insertion" started in the same transaction. If
- * succeeded is true, the tuple is fully inserted, if false, it's removed.
- */
-static inline void
-table_tuple_complete_speculative(Relation rel, TupleTableSlot *slot,
-								 uint32 specToken, bool succeeded)
-{
-	rel->rd_tableam->tuple_complete_speculative(rel, slot, specToken,
-												succeeded);
-}
-
-/*
- * Insert multiple tuples into a table.
- *
- * This is like table_tuple_insert(), but inserts multiple tuples in one
- * operation. That's often faster than calling table_tuple_insert() in a loop,
- * because e.g. the AM can reduce WAL logging and page locking overhead.
- *
- * Except for taking `nslots` tuples as input, and an array of TupleTableSlots
- * in `slots`, the parameters for table_multi_insert() are the same as for
- * table_tuple_insert().
- *
- * Note: this leaks memory into the current memory context. You can create a
- * temporary context before calling this, if that's a problem.
- */
-static inline void
-table_multi_insert(Relation rel, TupleTableSlot **slots, int nslots,
-				   CommandId cid, int options, struct BulkInsertStateData *bistate)
-{
-	rel->rd_tableam->multi_insert(rel, slots, nslots,
-								  cid, options, bistate);
-}
-
-/*
- * Delete a tuple.
- *
- * NB: do not call this directly unless prepared to deal with
- * concurrent-update conditions.  Use simple_table_tuple_delete instead.
- *
- * Input parameters:
- *	relation - table to be modified (caller must hold suitable lock)
- *	tid - TID of tuple to be deleted
- *	cid - delete command ID (used for visibility test, and stored into
- *		cmax if successful)
- *	crosscheck - if not InvalidSnapshot, also check tuple against this
- *	wait - true if should wait for any conflicting update to commit/abort
- * Output parameters:
- *	tmfd - filled in failure cases (see below)
- *	changingPart - true iff the tuple is being moved to another partition
- *		table due to an update of the partition key. Otherwise, false.
- *
- * Normal, successful return value is TM_Ok, which means we did actually
- * delete it.  Failure return codes are TM_SelfModified, TM_Updated, and
- * TM_BeingModified (the last only possible if wait == false).
- *
- * In the failure cases, the routine fills *tmfd with the tuple's t_ctid,
- * t_xmax, and, if possible, and, if possible, t_cmax.  See comments for
- * struct TM_FailureData for additional info.
- */
-static inline TM_Result
-table_tuple_delete(Relation rel, ItemPointer tid, CommandId cid,
-				   Snapshot snapshot, Snapshot crosscheck, bool wait,
-				   TM_FailureData *tmfd, bool changingPart)
-{
-	return rel->rd_tableam->tuple_delete(rel, tid, cid,
-										 snapshot, crosscheck,
-										 wait, tmfd, changingPart);
-}
-
-/*
- * Update a tuple.
- *
- * NB: do not call this directly unless you are prepared to deal with
- * concurrent-update conditions.  Use simple_table_tuple_update instead.
- *
- * Input parameters:
- *	relation - table to be modified (caller must hold suitable lock)
- *	otid - TID of old tuple to be replaced
- *	slot - newly constructed tuple data to store
- *	cid - update command ID (used for visibility test, and stored into
- *		cmax/cmin if successful)
- *	crosscheck - if not InvalidSnapshot, also check old tuple against this
- *	wait - true if should wait for any conflicting update to commit/abort
- * Output parameters:
- *	tmfd - filled in failure cases (see below)
- *	lockmode - filled with lock mode acquired on tuple
- *  update_indexes - in success cases this is set to true if new index entries
- *		are required for this tuple
- *
- * Normal, successful return value is TM_Ok, which means we did actually
- * update it.  Failure return codes are TM_SelfModified, TM_Updated, and
- * TM_BeingModified (the last only possible if wait == false).
- *
- * On success, the slot's tts_tid and tts_tableOid are updated to match the new
- * stored tuple; in particular, slot->tts_tid is set to the TID where the
- * new tuple was inserted, and its HEAP_ONLY_TUPLE flag is set iff a HOT
- * update was done.  However, any TOAST changes in the new tuple's
- * data are not reflected into *newtup.
- *
- * In the failure cases, the routine fills *tmfd with the tuple's t_ctid,
- * t_xmax, and, if possible, t_cmax.  See comments for struct TM_FailureData
- * for additional info.
- */
-static inline TM_Result
-table_tuple_update(Relation rel, ItemPointer otid, TupleTableSlot *slot,
-				   CommandId cid, Snapshot snapshot, Snapshot crosscheck,
-				   bool wait, TM_FailureData *tmfd, LockTupleMode *lockmode,
-				   TU_UpdateIndexes *update_indexes)
-{
-	return rel->rd_tableam->tuple_update(rel, otid, slot,
-										 cid, snapshot, crosscheck,
-										 wait, tmfd,
-										 lockmode, update_indexes);
-}
-
-/*
- * Lock a tuple in the specified mode.
- *
- * Input parameters:
- *	relation: relation containing tuple (caller must hold suitable lock)
- *	tid: TID of tuple to lock
- *	snapshot: snapshot to use for visibility determinations
- *	cid: current command ID (used for visibility test, and stored into
- *		tuple's cmax if lock is successful)
- *	mode: lock mode desired
- *	wait_policy: what to do if tuple lock is not available
- *	flags:
- *		If TUPLE_LOCK_FLAG_LOCK_UPDATE_IN_PROGRESS, follow the update chain to
- *		also lock descendant tuples if lock modes don't conflict.
- *		If TUPLE_LOCK_FLAG_FIND_LAST_VERSION, follow the update chain and lock
- *		latest version.
- *
- * Output parameters:
- *	*slot: contains the target tuple
- *	*tmfd: filled in failure cases (see below)
- *
- * Function result may be:
- *	TM_Ok: lock was successfully acquired
- *	TM_Invisible: lock failed because tuple was never visible to us
- *	TM_SelfModified: lock failed because tuple updated by self
- *	TM_Updated: lock failed because tuple updated by other xact
- *	TM_Deleted: lock failed because tuple deleted by other xact
- *	TM_WouldBlock: lock couldn't be acquired and wait_policy is skip
- *
- * In the failure cases other than TM_Invisible and TM_Deleted, the routine
- * fills *tmfd with the tuple's t_ctid, t_xmax, and, if possible, t_cmax.  See
- * comments for struct TM_FailureData for additional info.
- */
-static inline TM_Result
-table_tuple_lock(Relation rel, ItemPointer tid, Snapshot snapshot,
-				 TupleTableSlot *slot, CommandId cid, LockTupleMode mode,
-				 LockWaitPolicy wait_policy, uint8 flags,
-				 TM_FailureData *tmfd)
-{
-	return rel->rd_tableam->tuple_lock(rel, tid, snapshot, slot,
-									   cid, mode, wait_policy,
-									   flags, tmfd);
-}
-
-/*
- * Perform operations necessary to complete insertions made via
- * tuple_insert and multi_insert with a BulkInsertState specified.
- */
-static inline void
-table_finish_bulk_insert(Relation rel, int options)
-{
-	/* optional callback */
-	if (rel->rd_tableam && rel->rd_tableam->finish_bulk_insert)
-		rel->rd_tableam->finish_bulk_insert(rel, options);
-}
-
-
-/* ------------------------------------------------------------------------
- * DDL related functionality.
- * ------------------------------------------------------------------------
- */
-
-/*
- * Create storage for `rel` in `newrlocator`, with persistence set to
- * `persistence`.
- *
- * This is used both during relation creation and various DDL operations to
- * create new rel storage that can be filled from scratch.  When creating
- * new storage for an existing relfilelocator, this should be called before the
- * relcache entry has been updated.
- *
- * *freezeXid, *minmulti are set to the xid / multixact horizon for the table
- * that pg_class.{relfrozenxid, relminmxid} have to be set to.
- */
-static inline void
-table_relation_set_new_filelocator(Relation rel,
-								   const RelFileLocator *newrlocator,
-								   char persistence,
-								   TransactionId *freezeXid,
-								   MultiXactId *minmulti)
-{
-	rel->rd_tableam->relation_set_new_filelocator(rel, newrlocator,
-												  persistence, freezeXid,
-												  minmulti);
-}
-
-/*
- * Remove all table contents from `rel`, in a non-transactional manner.
- * Non-transactional meaning that there's no need to support rollbacks. This
- * commonly only is used to perform truncations for relation storage created in
- * the current transaction.
- */
-static inline void
-table_relation_nontransactional_truncate(Relation rel)
-{
-	rel->rd_tableam->relation_nontransactional_truncate(rel);
-}
-
-/*
- * Copy data from `rel` into the new relfilelocator `newrlocator`. The new
- * relfilelocator may not have storage associated before this function is
- * called. This is only supposed to be used for low level operations like
- * changing a relation's tablespace.
- */
-static inline void
-table_relation_copy_data(Relation rel, const RelFileLocator *newrlocator)
-{
-	rel->rd_tableam->relation_copy_data(rel, newrlocator);
-}
-
-/*
- * Copy data from `OldTable` into `NewTable`, as part of a CLUSTER or VACUUM
- * FULL.
- *
- * Additional Input parameters:
- * - use_sort - if true, the table contents are sorted appropriate for
- *   `OldIndex`; if false and OldIndex is not InvalidOid, the data is copied
- *   in that index's order; if false and OldIndex is InvalidOid, no sorting is
- *   performed
- * - OldIndex - see use_sort
- * - OldestXmin - computed by vacuum_get_cutoffs(), even when
- *   not needed for the relation's AM
- * - *xid_cutoff - ditto
- * - *multi_cutoff - ditto
- *
- * Output parameters:
- * - *xid_cutoff - rel's new relfrozenxid value, may be invalid
- * - *multi_cutoff - rel's new relminmxid value, may be invalid
- * - *tups_vacuumed - stats, for logging, if appropriate for AM
- * - *tups_recently_dead - stats, for logging, if appropriate for AM
- */
-static inline void
-table_relation_copy_for_cluster(Relation OldTable, Relation NewTable,
-								Relation OldIndex,
-								bool use_sort,
-								TransactionId OldestXmin,
-								TransactionId *xid_cutoff,
-								MultiXactId *multi_cutoff,
-								double *num_tuples,
-								double *tups_vacuumed,
-								double *tups_recently_dead)
-{
-	OldTable->rd_tableam->relation_copy_for_cluster(OldTable, NewTable, OldIndex,
-													use_sort, OldestXmin,
-													xid_cutoff, multi_cutoff,
-													num_tuples, tups_vacuumed,
-													tups_recently_dead);
-}
-
-/*
- * Perform VACUUM on the relation. The VACUUM can be triggered by a user or by
- * autovacuum. The specific actions performed by the AM will depend heavily on
- * the individual AM.
- *
- * On entry a transaction needs to already been established, and the
- * table is locked with a ShareUpdateExclusive lock.
- *
- * Note that neither VACUUM FULL (and CLUSTER), nor ANALYZE go through this
- * routine, even if (for ANALYZE) it is part of the same VACUUM command.
- */
-static inline void
-table_relation_vacuum(Relation rel, struct VacuumParams *params,
-					  BufferAccessStrategy bstrategy)
-{
-	rel->rd_tableam->relation_vacuum(rel, params, bstrategy);
-}
-
-/*
- * Prepare to analyze block `blockno` of `scan`. The scan needs to have been
- * started with table_beginscan_analyze().  Note that this routine might
- * acquire resources like locks that are held until
- * table_scan_analyze_next_tuple() returns false.
- *
- * Returns false if block is unsuitable for sampling, true otherwise.
- */
-static inline bool
-table_scan_analyze_next_block(TableScanDesc scan, BlockNumber blockno,
-							  BufferAccessStrategy bstrategy)
-{
-	return scan->rs_rd->rd_tableam->scan_analyze_next_block(scan, blockno,
-															bstrategy);
-}
-
-/*
- * Iterate over tuples in the block selected with
- * table_scan_analyze_next_block() (which needs to have returned true, and
- * this routine may not have returned false for the same block before). If a
- * tuple that's suitable for sampling is found, true is returned and a tuple
- * is stored in `slot`.
- *
- * *liverows and *deadrows are incremented according to the encountered
- * tuples.
- */
-static inline bool
-table_scan_analyze_next_tuple(TableScanDesc scan, TransactionId OldestXmin,
-							  double *liverows, double *deadrows,
-							  TupleTableSlot *slot)
-{
-	return scan->rs_rd->rd_tableam->scan_analyze_next_tuple(scan, OldestXmin,
-															liverows, deadrows,
-															slot);
-}
-
-/*
- * table_index_build_scan - scan the table to find tuples to be indexed
- *
- * This is called back from an access-method-specific index build procedure
- * after the AM has done whatever setup it needs.  The parent table relation
- * is scanned to find tuples that should be entered into the index.  Each
- * such tuple is passed to the AM's callback routine, which does the right
- * things to add it to the new index.  After we return, the AM's index
- * build procedure does whatever cleanup it needs.
- *
- * The total count of live tuples is returned.  This is for updating pg_class
- * statistics.  (It's annoying not to be able to do that here, but we want to
- * merge that update with others; see index_update_stats.)  Note that the
- * index AM itself must keep track of the number of index tuples; we don't do
- * so here because the AM might reject some of the tuples for its own reasons,
- * such as being unable to store NULLs.
- *
- * If 'progress', the PROGRESS_SCAN_BLOCKS_TOTAL counter is updated when
- * starting the scan, and PROGRESS_SCAN_BLOCKS_DONE is updated as we go along.
- *
- * A side effect is to set indexInfo->ii_BrokenHotChain to true if we detect
- * any potentially broken HOT chains.  Currently, we set this if there are any
- * RECENTLY_DEAD or DELETE_IN_PROGRESS entries in a HOT chain, without trying
- * very hard to detect whether they're really incompatible with the chain tip.
- * This only really makes sense for heap AM, it might need to be generalized
- * for other AMs later.
- */
-static inline double
-table_index_build_scan(Relation table_rel,
-					   Relation index_rel,
-					   struct IndexInfo *index_info,
-					   bool allow_sync,
-					   bool progress,
-					   IndexBuildCallback callback,
-					   void *callback_state,
-					   TableScanDesc scan)
-{
-	return table_rel->rd_tableam->index_build_range_scan(table_rel,
-														 index_rel,
-														 index_info,
-														 allow_sync,
-														 false,
-														 progress,
-														 0,
-														 InvalidBlockNumber,
-														 callback,
-														 callback_state,
-														 scan);
-}
-
-/*
- * As table_index_build_scan(), except that instead of scanning the complete
- * table, only the given number of blocks are scanned.  Scan to end-of-rel can
- * be signaled by passing InvalidBlockNumber as numblocks.  Note that
- * restricting the range to scan cannot be done when requesting syncscan.
- *
- * When "anyvisible" mode is requested, all tuples visible to any transaction
- * are indexed and counted as live, including those inserted or deleted by
- * transactions that are still in progress.
- */
-static inline double
-table_index_build_range_scan(Relation table_rel,
-							 Relation index_rel,
-							 struct IndexInfo *index_info,
-							 bool allow_sync,
-							 bool anyvisible,
-							 bool progress,
-							 BlockNumber start_blockno,
-							 BlockNumber numblocks,
-							 IndexBuildCallback callback,
-							 void *callback_state,
-							 TableScanDesc scan)
-{
-	return table_rel->rd_tableam->index_build_range_scan(table_rel,
-														 index_rel,
-														 index_info,
-														 allow_sync,
-														 anyvisible,
-														 progress,
-														 start_blockno,
-														 numblocks,
-														 callback,
-														 callback_state,
-														 scan);
-}
-
-/*
- * table_index_validate_scan - second table scan for concurrent index build
- *
- * See validate_index() for an explanation.
- */
-static inline void
-table_index_validate_scan(Relation table_rel,
-						  Relation index_rel,
-						  struct IndexInfo *index_info,
-						  Snapshot snapshot,
-						  struct ValidateIndexState *state)
-{
-	table_rel->rd_tableam->index_validate_scan(table_rel,
-											   index_rel,
-											   index_info,
-											   snapshot,
-											   state);
-}
-
-
-/* ----------------------------------------------------------------------------
- * Miscellaneous functionality
- * ----------------------------------------------------------------------------
- */
-
-/*
- * Return the current size of `rel` in bytes. If `forkNumber` is
- * InvalidForkNumber, return the relation's overall size, otherwise the size
- * for the indicated fork.
- *
- * Note that the overall size might not be the equivalent of the sum of sizes
- * for the individual forks for some AMs, e.g. because the AMs storage does
- * not neatly map onto the builtin types of forks.
- */
-static inline uint64
-table_relation_size(Relation rel, ForkNumber forkNumber)
-{
-	return rel->rd_tableam->relation_size(rel, forkNumber);
-}
-
-/*
- * table_relation_needs_toast_table - does this relation need a toast table?
- */
-static inline bool
-table_relation_needs_toast_table(Relation rel)
-{
-	return rel->rd_tableam->relation_needs_toast_table(rel);
-}
-
-/*
- * Return the OID of the AM that should be used to implement the TOAST table
- * for this relation.
- */
-static inline Oid
-table_relation_toast_am(Relation rel)
-{
-	return rel->rd_tableam->relation_toast_am(rel);
-}
-
-/*
- * Fetch all or part of a TOAST value from a TOAST table.
- *
- * If this AM is never used to implement a TOAST table, then this callback
- * is not needed. But, if toasted values are ever stored in a table of this
- * type, then you will need this callback.
- *
- * toastrel is the relation in which the toasted value is stored.
- *
- * valueid identifies which toast value is to be fetched. For the heap,
- * this corresponds to the values stored in the chunk_id column.
- *
- * attrsize is the total size of the toast value to be fetched.
- *
- * sliceoffset is the offset within the toast value of the first byte that
- * should be fetched.
- *
- * slicelength is the number of bytes from the toast value that should be
- * fetched.
- *
- * result is caller-allocated space into which the fetched bytes should be
- * stored.
- */
-static inline void
-table_relation_fetch_toast_slice(Relation toastrel, Oid valueid,
-								 int32 attrsize, int32 sliceoffset,
-								 int32 slicelength, struct varlena *result)
-{
-	toastrel->rd_tableam->relation_fetch_toast_slice(toastrel, valueid,
-													 attrsize,
-													 sliceoffset, slicelength,
-													 result);
-}
-
-
-/* ----------------------------------------------------------------------------
- * Planner related functionality
- * ----------------------------------------------------------------------------
- */
-
-/*
- * Estimate the current size of the relation, as an AM specific workhorse for
- * estimate_rel_size(). Look there for an explanation of the parameters.
- */
-static inline void
-table_relation_estimate_size(Relation rel, int32 *attr_widths,
-							 BlockNumber *pages, double *tuples,
-							 double *allvisfrac)
-{
-	rel->rd_tableam->relation_estimate_size(rel, attr_widths, pages, tuples,
-											allvisfrac);
-}
-
-
-/* ----------------------------------------------------------------------------
- * Executor related functionality
- * ----------------------------------------------------------------------------
- */
-
-/*
- * Prepare to fetch / check / return tuples from `tbmres->blockno` as part of
- * a bitmap table scan. `scan` needs to have been started via
- * table_beginscan_bm(). Returns false if there are no tuples to be found on
- * the page, true otherwise.
- *
- * Note, this is an optionally implemented function, therefore should only be
- * used after verifying the presence (at plan time or such).
- */
-static inline bool
-table_scan_bitmap_next_block(TableScanDesc scan,
-							 struct TBMIterateResult *tbmres)
-{
-	/*
-	 * We don't expect direct calls to table_scan_bitmap_next_block with valid
-	 * CheckXidAlive for catalog or regular tables.  See detailed comments in
-	 * xact.c where these variables are declared.
-	 */
-	if (unlikely(TransactionIdIsValid(CheckXidAlive) && !bsysscan))
-		elog(ERROR, "unexpected table_scan_bitmap_next_block call during logical decoding");
-
-	return scan->rs_rd->rd_tableam->scan_bitmap_next_block(scan,
-														   tbmres);
-}
-
-/*
- * Fetch the next tuple of a bitmap table scan into `slot` and return true if
- * a visible tuple was found, false otherwise.
- * table_scan_bitmap_next_block() needs to previously have selected a
- * block (i.e. returned true), and no previous
- * table_scan_bitmap_next_tuple() for the same block may have
- * returned false.
- */
-static inline bool
-table_scan_bitmap_next_tuple(TableScanDesc scan,
-							 struct TBMIterateResult *tbmres,
-							 TupleTableSlot *slot)
-{
-	/*
-	 * We don't expect direct calls to table_scan_bitmap_next_tuple with valid
-	 * CheckXidAlive for catalog or regular tables.  See detailed comments in
-	 * xact.c where these variables are declared.
-	 */
-	if (unlikely(TransactionIdIsValid(CheckXidAlive) && !bsysscan))
-		elog(ERROR, "unexpected table_scan_bitmap_next_tuple call during logical decoding");
-
-	return scan->rs_rd->rd_tableam->scan_bitmap_next_tuple(scan,
-														   tbmres,
-														   slot);
-}
-
-/*
- * Prepare to fetch tuples from the next block in a sample scan. Returns false
- * if the sample scan is finished, true otherwise. `scan` needs to have been
- * started via table_beginscan_sampling().
- *
- * This will call the TsmRoutine's NextSampleBlock() callback if necessary
- * (i.e. NextSampleBlock is not NULL), or perform a sequential scan over the
- * underlying relation.
- */
-static inline bool
-table_scan_sample_next_block(TableScanDesc scan,
-							 struct SampleScanState *scanstate)
-{
-	/*
-	 * We don't expect direct calls to table_scan_sample_next_block with valid
-	 * CheckXidAlive for catalog or regular tables.  See detailed comments in
-	 * xact.c where these variables are declared.
-	 */
-	if (unlikely(TransactionIdIsValid(CheckXidAlive) && !bsysscan))
-		elog(ERROR, "unexpected table_scan_sample_next_block call during logical decoding");
-	return scan->rs_rd->rd_tableam->scan_sample_next_block(scan, scanstate);
-}
-
-/*
- * Fetch the next sample tuple into `slot` and return true if a visible tuple
- * was found, false otherwise. table_scan_sample_next_block() needs to
- * previously have selected a block (i.e. returned true), and no previous
- * table_scan_sample_next_tuple() for the same block may have returned false.
- *
- * This will call the TsmRoutine's NextSampleTuple() callback.
- */
-static inline bool
-table_scan_sample_next_tuple(TableScanDesc scan,
-							 struct SampleScanState *scanstate,
-							 TupleTableSlot *slot)
-{
-	/*
-	 * We don't expect direct calls to table_scan_sample_next_tuple with valid
-	 * CheckXidAlive for catalog or regular tables.  See detailed comments in
-	 * xact.c where these variables are declared.
-	 */
-	if (unlikely(TransactionIdIsValid(CheckXidAlive) && !bsysscan))
-		elog(ERROR, "unexpected table_scan_sample_next_tuple call during logical decoding");
-	return scan->rs_rd->rd_tableam->scan_sample_next_tuple(scan, scanstate,
-														   slot);
-}
-
-
-/* ----------------------------------------------------------------------------
- * Functions to make modifications a bit simpler.
- * ----------------------------------------------------------------------------
- */
-
-extern void simple_table_tuple_insert(Relation rel, TupleTableSlot *slot);
-extern void simple_table_tuple_delete(Relation rel, ItemPointer tid,
-									  Snapshot snapshot);
-extern void simple_table_tuple_update(Relation rel, ItemPointer otid,
-									  TupleTableSlot *slot, Snapshot snapshot,
-									  TU_UpdateIndexes *update_indexes);
-
-
-/* ----------------------------------------------------------------------------
- * Helper functions to implement parallel scans for block oriented AMs.
- * ----------------------------------------------------------------------------
- */
-
-extern Size table_block_parallelscan_estimate(Relation rel);
-extern Size table_block_parallelscan_initialize(Relation rel,
-												ParallelTableScanDesc pscan);
-extern void table_block_parallelscan_reinitialize(Relation rel,
-												  ParallelTableScanDesc pscan);
-extern BlockNumber table_block_parallelscan_nextpage(Relation rel,
-													 ParallelBlockTableScanWorker pbscanwork,
-													 ParallelBlockTableScanDesc pbscan);
-extern void table_block_parallelscan_startblock_init(Relation rel,
-													 ParallelBlockTableScanWorker pbscanwork,
-													 ParallelBlockTableScanDesc pbscan);
-
-
-/* ----------------------------------------------------------------------------
- * Helper functions to implement relation sizing for block oriented AMs.
- * ----------------------------------------------------------------------------
- */
-
-extern uint64 table_block_relation_size(Relation rel, ForkNumber forkNumber);
-extern void table_block_relation_estimate_size(Relation rel,
-											   int32 *attr_widths,
-											   BlockNumber *pages,
-											   double *tuples,
-											   double *allvisfrac,
-											   Size overhead_bytes_per_tuple,
-											   Size usable_bytes_per_page);
-
-/* ----------------------------------------------------------------------------
- * Functions in tableamapi.c
- * ----------------------------------------------------------------------------
- */
-
-extern const TableAmRoutine *GetTableAmRoutine(Oid amhandler);
-extern const TableAmRoutine *GetHeapamTableAmRoutine(void);
-
-#endif							/* TABLEAM_H */