pg_query 5.0.0 → 6.0.0

data/ext/pg_query/include/access/xlog.h

@@ -1,302 +0,0 @@
-/*
- * xlog.h
- *
- * PostgreSQL write-ahead log manager
- *
- * Portions Copyright (c) 1996-2023, PostgreSQL Global Development Group
- * Portions Copyright (c) 1994, Regents of the University of California
- *
- * src/include/access/xlog.h
- */
-#ifndef XLOG_H
-#define XLOG_H
-
-#include "access/xlogbackup.h"
-#include "access/xlogdefs.h"
-#include "datatype/timestamp.h"
-#include "lib/stringinfo.h"
-#include "nodes/pg_list.h"
-
-
-/* Sync methods */
-#define SYNC_METHOD_FSYNC		0
-#define SYNC_METHOD_FDATASYNC	1
-#define SYNC_METHOD_OPEN		2	/* for O_SYNC */
-#define SYNC_METHOD_FSYNC_WRITETHROUGH	3
-#define SYNC_METHOD_OPEN_DSYNC	4	/* for O_DSYNC */
-extern PGDLLIMPORT int sync_method;
-
-extern PGDLLIMPORT XLogRecPtr ProcLastRecPtr;
-extern PGDLLIMPORT XLogRecPtr XactLastRecEnd;
-extern PGDLLIMPORT XLogRecPtr XactLastCommitEnd;
-
-/* these variables are GUC parameters related to XLOG */
-extern PGDLLIMPORT int wal_segment_size;
-extern PGDLLIMPORT int min_wal_size_mb;
-extern PGDLLIMPORT int max_wal_size_mb;
-extern PGDLLIMPORT int wal_keep_size_mb;
-extern PGDLLIMPORT int max_slot_wal_keep_size_mb;
-extern PGDLLIMPORT int XLOGbuffers;
-extern PGDLLIMPORT int XLogArchiveTimeout;
-extern PGDLLIMPORT int wal_retrieve_retry_interval;
-extern PGDLLIMPORT char *XLogArchiveCommand;
-extern PGDLLIMPORT bool EnableHotStandby;
-extern PGDLLIMPORT bool fullPageWrites;
-extern PGDLLIMPORT bool wal_log_hints;
-extern PGDLLIMPORT int wal_compression;
-extern PGDLLIMPORT bool wal_init_zero;
-extern PGDLLIMPORT bool wal_recycle;
-extern PGDLLIMPORT bool *wal_consistency_checking;
-extern PGDLLIMPORT char *wal_consistency_checking_string;
-extern PGDLLIMPORT bool log_checkpoints;
-extern PGDLLIMPORT bool track_wal_io_timing;
-extern PGDLLIMPORT int wal_decode_buffer_size;
-
-extern PGDLLIMPORT int CheckPointSegments;
-
-/* Archive modes */
-typedef enum ArchiveMode
-{
-	ARCHIVE_MODE_OFF = 0,		/* disabled */
-	ARCHIVE_MODE_ON,			/* enabled while server is running normally */
-	ARCHIVE_MODE_ALWAYS			/* enabled always (even during recovery) */
-} ArchiveMode;
-extern PGDLLIMPORT int XLogArchiveMode;
-
-/* WAL levels */
-typedef enum WalLevel
-{
-	WAL_LEVEL_MINIMAL = 0,
-	WAL_LEVEL_REPLICA,
-	WAL_LEVEL_LOGICAL
-} WalLevel;
-
-/* Compression algorithms for WAL */
-typedef enum WalCompression
-{
-	WAL_COMPRESSION_NONE = 0,
-	WAL_COMPRESSION_PGLZ,
-	WAL_COMPRESSION_LZ4,
-	WAL_COMPRESSION_ZSTD
-} WalCompression;
-
-/* Recovery states */
-typedef enum RecoveryState
-{
-	RECOVERY_STATE_CRASH = 0,	/* crash recovery */
-	RECOVERY_STATE_ARCHIVE,		/* archive recovery */
-	RECOVERY_STATE_DONE			/* currently in production */
-} RecoveryState;
-
-extern PGDLLIMPORT int wal_level;
-
-/* Is WAL archiving enabled (always or only while server is running normally)? */
-#define XLogArchivingActive() \
-	(AssertMacro(XLogArchiveMode == ARCHIVE_MODE_OFF || wal_level >= WAL_LEVEL_REPLICA), XLogArchiveMode > ARCHIVE_MODE_OFF)
-/* Is WAL archiving enabled always (even during recovery)? */
-#define XLogArchivingAlways() \
-	(AssertMacro(XLogArchiveMode == ARCHIVE_MODE_OFF || wal_level >= WAL_LEVEL_REPLICA), XLogArchiveMode == ARCHIVE_MODE_ALWAYS)
-
-/*
- * Is WAL-logging necessary for archival or log-shipping, or can we skip
- * WAL-logging if we fsync() the data before committing instead?
- */
-#define XLogIsNeeded() (wal_level >= WAL_LEVEL_REPLICA)
-
-/*
- * Is a full-page image needed for hint bit updates?
- *
- * Normally, we don't WAL-log hint bit updates, but if checksums are enabled,
- * we have to protect them against torn page writes.  When you only set
- * individual bits on a page, it's still consistent no matter what combination
- * of the bits make it to disk, but the checksum wouldn't match.  Also WAL-log
- * them if forced by wal_log_hints=on.
- */
-#define XLogHintBitIsNeeded() (DataChecksumsEnabled() || wal_log_hints)
-
-/* Do we need to WAL-log information required only for Hot Standby and logical replication? */
-#define XLogStandbyInfoActive() (wal_level >= WAL_LEVEL_REPLICA)
-
-/* Do we need to WAL-log information required only for logical replication? */
-#define XLogLogicalInfoActive() (wal_level >= WAL_LEVEL_LOGICAL)
-
-#ifdef WAL_DEBUG
-extern PGDLLIMPORT bool XLOG_DEBUG;
-#endif
-
-/*
- * OR-able request flag bits for checkpoints.  The "cause" bits are used only
- * for logging purposes.  Note: the flags must be defined so that it's
- * sensible to OR together request flags arising from different requestors.
- */
-
-/* These directly affect the behavior of CreateCheckPoint and subsidiaries */
-#define CHECKPOINT_IS_SHUTDOWN	0x0001	/* Checkpoint is for shutdown */
-#define CHECKPOINT_END_OF_RECOVERY	0x0002	/* Like shutdown checkpoint, but
-											 * issued at end of WAL recovery */
-#define CHECKPOINT_IMMEDIATE	0x0004	/* Do it without delays */
-#define CHECKPOINT_FORCE		0x0008	/* Force even if no activity */
-#define CHECKPOINT_FLUSH_ALL	0x0010	/* Flush all pages, including those
-										 * belonging to unlogged tables */
-/* These are important to RequestCheckpoint */
-#define CHECKPOINT_WAIT			0x0020	/* Wait for completion */
-#define CHECKPOINT_REQUESTED	0x0040	/* Checkpoint request has been made */
-/* These indicate the cause of a checkpoint request */
-#define CHECKPOINT_CAUSE_XLOG	0x0080	/* XLOG consumption */
-#define CHECKPOINT_CAUSE_TIME	0x0100	/* Elapsed time */
-
-/*
- * Flag bits for the record being inserted, set using XLogSetRecordFlags().
- */
-#define XLOG_INCLUDE_ORIGIN		0x01	/* include the replication origin */
-#define XLOG_MARK_UNIMPORTANT	0x02	/* record not important for durability */
-
-
-/* Checkpoint statistics */
-typedef struct CheckpointStatsData
-{
-	TimestampTz ckpt_start_t;	/* start of checkpoint */
-	TimestampTz ckpt_write_t;	/* start of flushing buffers */
-	TimestampTz ckpt_sync_t;	/* start of fsyncs */
-	TimestampTz ckpt_sync_end_t;	/* end of fsyncs */
-	TimestampTz ckpt_end_t;		/* end of checkpoint */
-
-	int			ckpt_bufs_written;	/* # of buffers written */
-
-	int			ckpt_segs_added;	/* # of new xlog segments created */
-	int			ckpt_segs_removed;	/* # of xlog segments deleted */
-	int			ckpt_segs_recycled; /* # of xlog segments recycled */
-
-	int			ckpt_sync_rels; /* # of relations synced */
-	uint64		ckpt_longest_sync;	/* Longest sync for one relation */
-	uint64		ckpt_agg_sync_time; /* The sum of all the individual sync
-									 * times, which is not necessarily the
-									 * same as the total elapsed time for the
-									 * entire sync phase. */
-} CheckpointStatsData;
-
-extern PGDLLIMPORT CheckpointStatsData CheckpointStats;
-
-/*
- * GetWALAvailability return codes
- */
-typedef enum WALAvailability
-{
-	WALAVAIL_INVALID_LSN,		/* parameter error */
-	WALAVAIL_RESERVED,			/* WAL segment is within max_wal_size */
-	WALAVAIL_EXTENDED,			/* WAL segment is reserved by a slot or
-								 * wal_keep_size */
-	WALAVAIL_UNRESERVED,		/* no longer reserved, but not removed yet */
-	WALAVAIL_REMOVED			/* WAL segment has been removed */
-} WALAvailability;
-
-struct XLogRecData;
-struct XLogReaderState;
-
-extern XLogRecPtr XLogInsertRecord(struct XLogRecData *rdata,
-								   XLogRecPtr fpw_lsn,
-								   uint8 flags,
-								   int num_fpi,
-								   bool topxid_included);
-extern void XLogFlush(XLogRecPtr record);
-extern bool XLogBackgroundFlush(void);
-extern bool XLogNeedsFlush(XLogRecPtr record);
-extern int	XLogFileInit(XLogSegNo logsegno, TimeLineID logtli);
-extern int	XLogFileOpen(XLogSegNo segno, TimeLineID tli);
-
-extern void CheckXLogRemoved(XLogSegNo segno, TimeLineID tli);
-extern XLogSegNo XLogGetLastRemovedSegno(void);
-extern void XLogSetAsyncXactLSN(XLogRecPtr asyncXactLSN);
-extern void XLogSetReplicationSlotMinimumLSN(XLogRecPtr lsn);
-
-extern void xlog_redo(struct XLogReaderState *record);
-extern void xlog_desc(StringInfo buf, struct XLogReaderState *record);
-extern const char *xlog_identify(uint8 info);
-
-extern void issue_xlog_fsync(int fd, XLogSegNo segno, TimeLineID tli);
-
-extern bool RecoveryInProgress(void);
-extern RecoveryState GetRecoveryState(void);
-extern bool XLogInsertAllowed(void);
-extern XLogRecPtr GetXLogInsertRecPtr(void);
-extern XLogRecPtr GetXLogWriteRecPtr(void);
-
-extern uint64 GetSystemIdentifier(void);
-extern char *GetMockAuthenticationNonce(void);
-extern bool DataChecksumsEnabled(void);
-extern XLogRecPtr GetFakeLSNForUnloggedRel(void);
-extern Size XLOGShmemSize(void);
-extern void XLOGShmemInit(void);
-extern void BootStrapXLOG(void);
-extern void InitializeWalConsistencyChecking(void);
-extern void LocalProcessControlFile(bool reset);
-extern WalLevel GetActiveWalLevelOnStandby(void);
-extern void StartupXLOG(void);
-extern void ShutdownXLOG(int code, Datum arg);
-extern void CreateCheckPoint(int flags);
-extern bool CreateRestartPoint(int flags);
-extern WALAvailability GetWALAvailability(XLogRecPtr targetLSN);
-extern void XLogPutNextOid(Oid nextOid);
-extern XLogRecPtr XLogRestorePoint(const char *rpName);
-extern void UpdateFullPageWrites(void);
-extern void GetFullPageWriteInfo(XLogRecPtr *RedoRecPtr_p, bool *doPageWrites_p);
-extern XLogRecPtr GetRedoRecPtr(void);
-extern XLogRecPtr GetInsertRecPtr(void);
-extern XLogRecPtr GetFlushRecPtr(TimeLineID *insertTLI);
-extern TimeLineID GetWALInsertionTimeLine(void);
-extern XLogRecPtr GetLastImportantRecPtr(void);
-
-extern void SetWalWriterSleeping(bool sleeping);
-
-/*
- * Routines used by xlogrecovery.c to call back into xlog.c during recovery.
- */
-extern void RemoveNonParentXlogFiles(XLogRecPtr switchpoint, TimeLineID newTLI);
-extern bool XLogCheckpointNeeded(XLogSegNo new_segno);
-extern void SwitchIntoArchiveRecovery(XLogRecPtr EndRecPtr, TimeLineID replayTLI);
-extern void ReachedEndOfBackup(XLogRecPtr EndRecPtr, TimeLineID tli);
-extern void SetInstallXLogFileSegmentActive(void);
-extern bool IsInstallXLogFileSegmentActive(void);
-extern void XLogShutdownWalRcv(void);
-
-/*
- * Routines to start, stop, and get status of a base backup.
- */
-
-/*
- * Session-level status of base backups
- *
- * This is used in parallel with the shared memory status to control parallel
- * execution of base backup functions for a given session, be it a backend
- * dedicated to replication or a normal backend connected to a database. The
- * update of the session-level status happens at the same time as the shared
- * memory counters to keep a consistent global and local state of the backups
- * running.
- */
-typedef enum SessionBackupState
-{
-	SESSION_BACKUP_NONE,
-	SESSION_BACKUP_RUNNING,
-} SessionBackupState;
-
-extern void do_pg_backup_start(const char *backupidstr, bool fast,
-							   List **tablespaces, BackupState *state,
-							   StringInfo tblspcmapfile);
-extern void do_pg_backup_stop(BackupState *state, bool waitforarchive);
-extern void do_pg_abort_backup(int code, Datum arg);
-extern void register_persistent_abort_backup_handler(void);
-extern SessionBackupState get_backup_status(void);
-
-/* File path names (all relative to $PGDATA) */
-#define RECOVERY_SIGNAL_FILE	"recovery.signal"
-#define STANDBY_SIGNAL_FILE		"standby.signal"
-#define BACKUP_LABEL_FILE		"backup_label"
-#define BACKUP_LABEL_OLD		"backup_label.old"
-
-#define TABLESPACE_MAP			"tablespace_map"
-#define TABLESPACE_MAP_OLD		"tablespace_map.old"
-
-/* files to signal promotion to primary */
-#define PROMOTE_SIGNAL_FILE		"promote"
-
-#endif							/* XLOG_H */

data/ext/pg_query/include/access/xlog_internal.h

@@ -1,404 +0,0 @@
-/*
- * xlog_internal.h
- *
- * PostgreSQL write-ahead log internal declarations
- *
- * NOTE: this file is intended to contain declarations useful for
- * manipulating the XLOG files directly, but it is not supposed to be
- * needed by rmgr routines (redo support for individual record types).
- * So the XLogRecord typedef and associated stuff appear in xlogrecord.h.
- *
- * Note: This file must be includable in both frontend and backend contexts,
- * to allow stand-alone tools like pg_receivewal to deal with WAL files.
- *
- * Portions Copyright (c) 1996-2023, PostgreSQL Global Development Group
- * Portions Copyright (c) 1994, Regents of the University of California
- *
- * src/include/access/xlog_internal.h
- */
-#ifndef XLOG_INTERNAL_H
-#define XLOG_INTERNAL_H
-
-#include "access/xlogdefs.h"
-#include "access/xlogreader.h"
-#include "datatype/timestamp.h"
-#include "lib/stringinfo.h"
-#include "pgtime.h"
-#include "storage/block.h"
-#include "storage/relfilelocator.h"
-
-
-/*
- * Each page of XLOG file has a header like this:
- */
-#define XLOG_PAGE_MAGIC 0xD113	/* can be used as WAL version indicator */
-
-typedef struct XLogPageHeaderData
-{
-	uint16		xlp_magic;		/* magic value for correctness checks */
-	uint16		xlp_info;		/* flag bits, see below */
-	TimeLineID	xlp_tli;		/* TimeLineID of first record on page */
-	XLogRecPtr	xlp_pageaddr;	/* XLOG address of this page */
-
-	/*
-	 * When there is not enough space on current page for whole record, we
-	 * continue on the next page.  xlp_rem_len is the number of bytes
-	 * remaining from a previous page; it tracks xl_tot_len in the initial
-	 * header.  Note that the continuation data isn't necessarily aligned.
-	 */
-	uint32		xlp_rem_len;	/* total len of remaining data for record */
-} XLogPageHeaderData;
-
-#define SizeOfXLogShortPHD	MAXALIGN(sizeof(XLogPageHeaderData))
-
-typedef XLogPageHeaderData *XLogPageHeader;
-
-/*
- * When the XLP_LONG_HEADER flag is set, we store additional fields in the
- * page header.  (This is ordinarily done just in the first page of an
- * XLOG file.)	The additional fields serve to identify the file accurately.
- */
-typedef struct XLogLongPageHeaderData
-{
-	XLogPageHeaderData std;		/* standard header fields */
-	uint64		xlp_sysid;		/* system identifier from pg_control */
-	uint32		xlp_seg_size;	/* just as a cross-check */
-	uint32		xlp_xlog_blcksz;	/* just as a cross-check */
-} XLogLongPageHeaderData;
-
-#define SizeOfXLogLongPHD	MAXALIGN(sizeof(XLogLongPageHeaderData))
-
-typedef XLogLongPageHeaderData *XLogLongPageHeader;
-
-/* When record crosses page boundary, set this flag in new page's header */
-#define XLP_FIRST_IS_CONTRECORD		0x0001
-/* This flag indicates a "long" page header */
-#define XLP_LONG_HEADER				0x0002
-/* This flag indicates backup blocks starting in this page are optional */
-#define XLP_BKP_REMOVABLE			0x0004
-/* Replaces a missing contrecord; see CreateOverwriteContrecordRecord */
-#define XLP_FIRST_IS_OVERWRITE_CONTRECORD 0x0008
-/* All defined flag bits in xlp_info (used for validity checking of header) */
-#define XLP_ALL_FLAGS				0x000F
-
-#define XLogPageHeaderSize(hdr)		\
-	(((hdr)->xlp_info & XLP_LONG_HEADER) ? SizeOfXLogLongPHD : SizeOfXLogShortPHD)
-
-/* wal_segment_size can range from 1MB to 1GB */
-#define WalSegMinSize 1024 * 1024
-#define WalSegMaxSize 1024 * 1024 * 1024
-/* default number of min and max wal segments */
-#define DEFAULT_MIN_WAL_SEGS 5
-#define DEFAULT_MAX_WAL_SEGS 64
-
-/* check that the given size is a valid wal_segment_size */
-#define IsPowerOf2(x) (x > 0 && ((x) & ((x)-1)) == 0)
-#define IsValidWalSegSize(size) \
-	 (IsPowerOf2(size) && \
-	 ((size) >= WalSegMinSize && (size) <= WalSegMaxSize))
-
-#define XLogSegmentsPerXLogId(wal_segsz_bytes)	\
-	(UINT64CONST(0x100000000) / (wal_segsz_bytes))
-
-#define XLogSegNoOffsetToRecPtr(segno, offset, wal_segsz_bytes, dest) \
-		(dest) = (segno) * (wal_segsz_bytes) + (offset)
-
-#define XLogSegmentOffset(xlogptr, wal_segsz_bytes)	\
-	((xlogptr) & ((wal_segsz_bytes) - 1))
-
-/*
- * Compute a segment number from an XLogRecPtr.
- *
- * For XLByteToSeg, do the computation at face value.  For XLByteToPrevSeg,
- * a boundary byte is taken to be in the previous segment.  This is suitable
- * for deciding which segment to write given a pointer to a record end,
- * for example.
- */
-#define XLByteToSeg(xlrp, logSegNo, wal_segsz_bytes) \
-	logSegNo = (xlrp) / (wal_segsz_bytes)
-
-#define XLByteToPrevSeg(xlrp, logSegNo, wal_segsz_bytes) \
-	logSegNo = ((xlrp) - 1) / (wal_segsz_bytes)
-
-/*
- * Convert values of GUCs measured in megabytes to equiv. segment count.
- * Rounds down.
- */
-#define XLogMBVarToSegs(mbvar, wal_segsz_bytes) \
-	((mbvar) / ((wal_segsz_bytes) / (1024 * 1024)))
-
-/*
- * Is an XLogRecPtr within a particular XLOG segment?
- *
- * For XLByteInSeg, do the computation at face value.  For XLByteInPrevSeg,
- * a boundary byte is taken to be in the previous segment.
- */
-#define XLByteInSeg(xlrp, logSegNo, wal_segsz_bytes) \
-	(((xlrp) / (wal_segsz_bytes)) == (logSegNo))
-
-#define XLByteInPrevSeg(xlrp, logSegNo, wal_segsz_bytes) \
-	((((xlrp) - 1) / (wal_segsz_bytes)) == (logSegNo))
-
-/* Check if an XLogRecPtr value is in a plausible range */
-#define XRecOffIsValid(xlrp) \
-		((xlrp) % XLOG_BLCKSZ >= SizeOfXLogShortPHD)
-
-/*
- * The XLog directory and control file (relative to $PGDATA)
- */
-#define XLOGDIR				"pg_wal"
-#define XLOG_CONTROL_FILE	"global/pg_control"
-
-/*
- * These macros encapsulate knowledge about the exact layout of XLog file
- * names, timeline history file names, and archive-status file names.
- */
-#define MAXFNAMELEN		64
-
-/* Length of XLog file name */
-#define XLOG_FNAME_LEN	   24
-
-/*
- * Generate a WAL segment file name.  Do not use this function in a helper
- * function allocating the result generated.
- */
-static inline void
-XLogFileName(char *fname, TimeLineID tli, XLogSegNo logSegNo, int wal_segsz_bytes)
-{
-	snprintf(fname, MAXFNAMELEN, "%08X%08X%08X", tli,
-			 (uint32) (logSegNo / XLogSegmentsPerXLogId(wal_segsz_bytes)),
-			 (uint32) (logSegNo % XLogSegmentsPerXLogId(wal_segsz_bytes)));
-}
-
-static inline void
-XLogFileNameById(char *fname, TimeLineID tli, uint32 log, uint32 seg)
-{
-	snprintf(fname, MAXFNAMELEN, "%08X%08X%08X", tli, log, seg);
-}
-
-static inline bool
-IsXLogFileName(const char *fname)
-{
-	return (strlen(fname) == XLOG_FNAME_LEN && \
-			strspn(fname, "0123456789ABCDEF") == XLOG_FNAME_LEN);
-}
-
-/*
- * XLOG segment with .partial suffix.  Used by pg_receivewal and at end of
- * archive recovery, when we want to archive a WAL segment but it might not
- * be complete yet.
- */
-static inline bool
-IsPartialXLogFileName(const char *fname)
-{
-	return (strlen(fname) == XLOG_FNAME_LEN + strlen(".partial") &&
-			strspn(fname, "0123456789ABCDEF") == XLOG_FNAME_LEN &&
-			strcmp(fname + XLOG_FNAME_LEN, ".partial") == 0);
-}
-
-static inline void
-XLogFromFileName(const char *fname, TimeLineID *tli, XLogSegNo *logSegNo, int wal_segsz_bytes)
-{
-	uint32		log;
-	uint32		seg;
-
-	sscanf(fname, "%08X%08X%08X", tli, &log, &seg);
-	*logSegNo = (uint64) log * XLogSegmentsPerXLogId(wal_segsz_bytes) + seg;
-}
-
-static inline void
-XLogFilePath(char *path, TimeLineID tli, XLogSegNo logSegNo, int wal_segsz_bytes)
-{
-	snprintf(path, MAXPGPATH, XLOGDIR "/%08X%08X%08X", tli,
-			 (uint32) (logSegNo / XLogSegmentsPerXLogId(wal_segsz_bytes)),
-			 (uint32) (logSegNo % XLogSegmentsPerXLogId(wal_segsz_bytes)));
-}
-
-static inline void
-TLHistoryFileName(char *fname, TimeLineID tli)
-{
-	snprintf(fname, MAXFNAMELEN, "%08X.history", tli);
-}
-
-static inline bool
-IsTLHistoryFileName(const char *fname)
-{
-	return (strlen(fname) == 8 + strlen(".history") &&
-			strspn(fname, "0123456789ABCDEF") == 8 &&
-			strcmp(fname + 8, ".history") == 0);
-}
-
-static inline void
-TLHistoryFilePath(char *path, TimeLineID tli)
-{
-	snprintf(path, MAXPGPATH, XLOGDIR "/%08X.history", tli);
-}
-
-static inline void
-StatusFilePath(char *path, const char *xlog, const char *suffix)
-{
-	snprintf(path, MAXPGPATH, XLOGDIR "/archive_status/%s%s", xlog, suffix);
-}
-
-static inline void
-BackupHistoryFileName(char *fname, TimeLineID tli, XLogSegNo logSegNo, XLogRecPtr startpoint, int wal_segsz_bytes)
-{
-	snprintf(fname, MAXFNAMELEN, "%08X%08X%08X.%08X.backup", tli,
-			 (uint32) (logSegNo / XLogSegmentsPerXLogId(wal_segsz_bytes)),
-			 (uint32) (logSegNo % XLogSegmentsPerXLogId(wal_segsz_bytes)),
-			 (uint32) (XLogSegmentOffset(startpoint, wal_segsz_bytes)));
-}
-
-static inline bool
-IsBackupHistoryFileName(const char *fname)
-{
-	return (strlen(fname) > XLOG_FNAME_LEN &&
-			strspn(fname, "0123456789ABCDEF") == XLOG_FNAME_LEN &&
-			strcmp(fname + strlen(fname) - strlen(".backup"), ".backup") == 0);
-}
-
-static inline void
-BackupHistoryFilePath(char *path, TimeLineID tli, XLogSegNo logSegNo, XLogRecPtr startpoint, int wal_segsz_bytes)
-{
-	snprintf(path, MAXPGPATH, XLOGDIR "/%08X%08X%08X.%08X.backup", tli,
-			 (uint32) (logSegNo / XLogSegmentsPerXLogId(wal_segsz_bytes)),
-			 (uint32) (logSegNo % XLogSegmentsPerXLogId(wal_segsz_bytes)),
-			 (uint32) (XLogSegmentOffset((startpoint), wal_segsz_bytes)));
-}
-
-/*
- * Information logged when we detect a change in one of the parameters
- * important for Hot Standby.
- */
-typedef struct xl_parameter_change
-{
-	int			MaxConnections;
-	int			max_worker_processes;
-	int			max_wal_senders;
-	int			max_prepared_xacts;
-	int			max_locks_per_xact;
-	int			wal_level;
-	bool		wal_log_hints;
-	bool		track_commit_timestamp;
-} xl_parameter_change;
-
-/* logs restore point */
-typedef struct xl_restore_point
-{
-	TimestampTz rp_time;
-	char		rp_name[MAXFNAMELEN];
-} xl_restore_point;
-
-/* Overwrite of prior contrecord */
-typedef struct xl_overwrite_contrecord
-{
-	XLogRecPtr	overwritten_lsn;
-	TimestampTz overwrite_time;
-} xl_overwrite_contrecord;
-
-/* End of recovery mark, when we don't do an END_OF_RECOVERY checkpoint */
-typedef struct xl_end_of_recovery
-{
-	TimestampTz end_time;
-	TimeLineID	ThisTimeLineID; /* new TLI */
-	TimeLineID	PrevTimeLineID; /* previous TLI we forked off from */
-} xl_end_of_recovery;
-
-/*
- * The functions in xloginsert.c construct a chain of XLogRecData structs
- * to represent the final WAL record.
- */
-typedef struct XLogRecData
-{
-	struct XLogRecData *next;	/* next struct in chain, or NULL */
-	char	   *data;			/* start of rmgr data to include */
-	uint32		len;			/* length of rmgr data to include */
-} XLogRecData;
-
-/*
- * Recovery target action.
- */
-typedef enum
-{
-	RECOVERY_TARGET_ACTION_PAUSE,
-	RECOVERY_TARGET_ACTION_PROMOTE,
-	RECOVERY_TARGET_ACTION_SHUTDOWN
-}			RecoveryTargetAction;
-
-struct LogicalDecodingContext;
-struct XLogRecordBuffer;
-
-/*
- * Method table for resource managers.
- *
- * This struct must be kept in sync with the PG_RMGR definition in
- * rmgr.c.
- *
- * rm_identify must return a name for the record based on xl_info (without
- * reference to the rmid). For example, XLOG_BTREE_VACUUM would be named
- * "VACUUM". rm_desc can then be called to obtain additional detail for the
- * record, if available (e.g. the last block).
- *
- * rm_mask takes as input a page modified by the resource manager and masks
- * out bits that shouldn't be flagged by wal_consistency_checking.
- *
- * RmgrTable[] is indexed by RmgrId values (see rmgrlist.h). If rm_name is
- * NULL, the corresponding RmgrTable entry is considered invalid.
- */
-typedef struct RmgrData
-{
-	const char *rm_name;
-	void		(*rm_redo) (XLogReaderState *record);
-	void		(*rm_desc) (StringInfo buf, XLogReaderState *record);
-	const char *(*rm_identify) (uint8 info);
-	void		(*rm_startup) (void);
-	void		(*rm_cleanup) (void);
-	void		(*rm_mask) (char *pagedata, BlockNumber blkno);
-	void		(*rm_decode) (struct LogicalDecodingContext *ctx,
-							  struct XLogRecordBuffer *buf);
-} RmgrData;
-
-extern PGDLLIMPORT RmgrData RmgrTable[];
-extern void RmgrStartup(void);
-extern void RmgrCleanup(void);
-extern void RmgrNotFound(RmgrId rmid);
-extern void RegisterCustomRmgr(RmgrId rmid, const RmgrData *rmgr);
-
-#ifndef FRONTEND
-static inline bool
-RmgrIdExists(RmgrId rmid)
-{
-	return RmgrTable[rmid].rm_name != NULL;
-}
-
-static inline RmgrData
-GetRmgr(RmgrId rmid)
-{
-	if (unlikely(!RmgrIdExists(rmid)))
-		RmgrNotFound(rmid);
-	return RmgrTable[rmid];
-}
-#endif
-
-/*
- * Exported to support xlog switching from checkpointer
- */
-extern pg_time_t GetLastSegSwitchData(XLogRecPtr *lastSwitchLSN);
-extern XLogRecPtr RequestXLogSwitch(bool mark_unimportant);
-
-extern void GetOldestRestartPoint(XLogRecPtr *oldrecptr, TimeLineID *oldtli);
-
-extern void XLogRecGetBlockRefInfo(XLogReaderState *record, bool pretty,
-								   bool detailed_format, StringInfo buf,
-								   uint32 *fpi_len);
-
-/*
- * Exported for the functions in timeline.c and xlogarchive.c.  Only valid
- * in the startup process.
- */
-extern PGDLLIMPORT bool ArchiveRecoveryRequested;
-extern PGDLLIMPORT bool InArchiveRecovery;
-extern PGDLLIMPORT bool StandbyMode;
-extern PGDLLIMPORT char *recoveryRestoreCommand;
-
-#endif							/* XLOG_INTERNAL_H */