pg_query 5.0.0 → 6.0.0

data/ext/pg_query/include/postgres/access/skey.h

@@ -0,0 +1,151 @@
+/*-------------------------------------------------------------------------
+ *
+ * skey.h
+ *	  POSTGRES scan key definitions.
+ *
+ *
+ * Portions Copyright (c) 1996-2024, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1994, Regents of the University of California
+ *
+ * src/include/access/skey.h
+ *
+ *-------------------------------------------------------------------------
+ */
+#ifndef SKEY_H
+#define SKEY_H
+
+#include "access/attnum.h"
+#include "access/stratnum.h"
+#include "fmgr.h"
+
+
+/*
+ * A ScanKey represents the application of a comparison operator between
+ * a table or index column and a constant.  When it's part of an array of
+ * ScanKeys, the comparison conditions are implicitly ANDed.  The index
+ * column is the left argument of the operator, if it's a binary operator.
+ * (The data structure can support unary indexable operators too; in that
+ * case sk_argument would go unused.  This is not currently implemented.)
+ *
+ * For an index scan, sk_strategy and sk_subtype must be set correctly for
+ * the operator.  When using a ScanKey in a heap scan, these fields are not
+ * used and may be set to InvalidStrategy/InvalidOid.
+ *
+ * If the operator is collation-sensitive, sk_collation must be set
+ * correctly as well.
+ *
+ * A ScanKey can also represent a ScalarArrayOpExpr, that is a condition
+ * "column op ANY(ARRAY[...])".  This is signaled by the SK_SEARCHARRAY
+ * flag bit.  The sk_argument is not a value of the operator's right-hand
+ * argument type, but rather an array of such values, and the per-element
+ * comparisons are to be ORed together.
+ *
+ * A ScanKey can also represent a condition "column IS NULL" or "column
+ * IS NOT NULL"; these cases are signaled by the SK_SEARCHNULL and
+ * SK_SEARCHNOTNULL flag bits respectively.  The argument is always NULL,
+ * and the sk_strategy, sk_subtype, sk_collation, and sk_func fields are
+ * not used (unless set by the index AM).
+ *
+ * SK_SEARCHARRAY, SK_SEARCHNULL and SK_SEARCHNOTNULL are supported only
+ * for index scans, not heap scans; and not all index AMs support them,
+ * only those that set amsearcharray or amsearchnulls respectively.
+ *
+ * A ScanKey can also represent an ordering operator invocation, that is
+ * an ordering requirement "ORDER BY indexedcol op constant".  This looks
+ * the same as a comparison operator, except that the operator doesn't
+ * (usually) yield boolean.  We mark such ScanKeys with SK_ORDER_BY.
+ * SK_SEARCHARRAY, SK_SEARCHNULL, SK_SEARCHNOTNULL cannot be used here.
+ *
+ * Note: in some places, ScanKeys are used as a convenient representation
+ * for the invocation of an access method support procedure.  In this case
+ * sk_strategy/sk_subtype are not meaningful (but sk_collation can be); and
+ * sk_func may refer to a function that returns something other than boolean.
+ */
+typedef struct ScanKeyData
+{
+	int			sk_flags;		/* flags, see below */
+	AttrNumber	sk_attno;		/* table or index column number */
+	StrategyNumber sk_strategy; /* operator strategy number */
+	Oid			sk_subtype;		/* strategy subtype */
+	Oid			sk_collation;	/* collation to use, if needed */
+	FmgrInfo	sk_func;		/* lookup info for function to call */
+	Datum		sk_argument;	/* data to compare */
+} ScanKeyData;
+
+typedef ScanKeyData *ScanKey;
+
+/*
+ * About row comparisons:
+ *
+ * The ScanKey data structure also supports row comparisons, that is ordered
+ * tuple comparisons like (x, y) > (c1, c2), having the SQL-spec semantics
+ * "x > c1 OR (x = c1 AND y > c2)".  Note that this is currently only
+ * implemented for btree index searches, not for heapscans or any other index
+ * type.  A row comparison is represented by a "header" ScanKey entry plus
+ * a separate array of ScanKeys, one for each column of the row comparison.
+ * The header entry has these properties:
+ *		sk_flags = SK_ROW_HEADER
+ *		sk_attno = index column number for leading column of row comparison
+ *		sk_strategy = btree strategy code for semantics of row comparison
+ *				(ie, < <= > or >=)
+ *		sk_subtype, sk_collation, sk_func: not used
+ *		sk_argument: pointer to subsidiary ScanKey array
+ * If the header is part of a ScanKey array that's sorted by attno, it
+ * must be sorted according to the leading column number.
+ *
+ * The subsidiary ScanKey array appears in logical column order of the row
+ * comparison, which may be different from index column order.  The array
+ * elements are like a normal ScanKey array except that:
+ *		sk_flags must include SK_ROW_MEMBER, plus SK_ROW_END in the last
+ *				element (needed since row header does not include a count)
+ *		sk_func points to the btree comparison support function for the
+ *				opclass, NOT the operator's implementation function.
+ * sk_strategy must be the same in all elements of the subsidiary array,
+ * that is, the same as in the header entry.
+ * SK_SEARCHARRAY, SK_SEARCHNULL, SK_SEARCHNOTNULL cannot be used here.
+ */
+
+/*
+ * ScanKeyData sk_flags
+ *
+ * sk_flags bits 0-15 are reserved for system-wide use (symbols for those
+ * bits should be defined here).  Bits 16-31 are reserved for use within
+ * individual index access methods.
+ */
+#define SK_ISNULL			0x0001	/* sk_argument is NULL */
+#define SK_UNARY			0x0002	/* unary operator (not supported!) */
+#define SK_ROW_HEADER		0x0004	/* row comparison header (see above) */
+#define SK_ROW_MEMBER		0x0008	/* row comparison member (see above) */
+#define SK_ROW_END			0x0010	/* last row comparison member */
+#define SK_SEARCHARRAY		0x0020	/* scankey represents ScalarArrayOp */
+#define SK_SEARCHNULL		0x0040	/* scankey represents "col IS NULL" */
+#define SK_SEARCHNOTNULL	0x0080	/* scankey represents "col IS NOT NULL" */
+#define SK_ORDER_BY			0x0100	/* scankey is for ORDER BY op */
+
+
+/*
+ * prototypes for functions in access/common/scankey.c
+ */
+extern void ScanKeyInit(ScanKey entry,
+						AttrNumber attributeNumber,
+						StrategyNumber strategy,
+						RegProcedure procedure,
+						Datum argument);
+extern void ScanKeyEntryInitialize(ScanKey entry,
+								   int flags,
+								   AttrNumber attributeNumber,
+								   StrategyNumber strategy,
+								   Oid subtype,
+								   Oid collation,
+								   RegProcedure procedure,
+								   Datum argument);
+extern void ScanKeyEntryInitializeWithInfo(ScanKey entry,
+										   int flags,
+										   AttrNumber attributeNumber,
+										   StrategyNumber strategy,
+										   Oid subtype,
+										   Oid collation,
+										   FmgrInfo *finfo,
+										   Datum argument);
+
+#endif							/* SKEY_H */

data/ext/pg_query/include/postgres/access/slru.h

@@ -0,0 +1,221 @@
+/*-------------------------------------------------------------------------
+ *
+ * slru.h
+ *		Simple LRU buffering for transaction status logfiles
+ *
+ * Portions Copyright (c) 1996-2024, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1994, Regents of the University of California
+ *
+ * src/include/access/slru.h
+ *
+ *-------------------------------------------------------------------------
+ */
+#ifndef SLRU_H
+#define SLRU_H
+
+#include "access/xlogdefs.h"
+#include "storage/lwlock.h"
+#include "storage/sync.h"
+
+/*
+ * To avoid overflowing internal arithmetic and the size_t data type, the
+ * number of buffers must not exceed this number.
+ */
+#define SLRU_MAX_ALLOWED_BUFFERS ((1024 * 1024 * 1024) / BLCKSZ)
+
+/*
+ * Define SLRU segment size.  A page is the same BLCKSZ as is used everywhere
+ * else in Postgres.  The segment size can be chosen somewhat arbitrarily;
+ * we make it 32 pages by default, or 256Kb, i.e. 1M transactions for CLOG
+ * or 64K transactions for SUBTRANS.
+ *
+ * Note: because TransactionIds are 32 bits and wrap around at 0xFFFFFFFF,
+ * page numbering also wraps around at 0xFFFFFFFF/xxxx_XACTS_PER_PAGE (where
+ * xxxx is CLOG or SUBTRANS, respectively), and segment numbering at
+ * 0xFFFFFFFF/xxxx_XACTS_PER_PAGE/SLRU_PAGES_PER_SEGMENT.  We need
+ * take no explicit notice of that fact in slru.c, except when comparing
+ * segment and page numbers in SimpleLruTruncate (see PagePrecedes()).
+ */
+#define SLRU_PAGES_PER_SEGMENT	32
+
+/*
+ * Page status codes.  Note that these do not include the "dirty" bit.
+ * page_dirty can be true only in the VALID or WRITE_IN_PROGRESS states;
+ * in the latter case it implies that the page has been re-dirtied since
+ * the write started.
+ */
+typedef enum
+{
+	SLRU_PAGE_EMPTY,			/* buffer is not in use */
+	SLRU_PAGE_READ_IN_PROGRESS, /* page is being read in */
+	SLRU_PAGE_VALID,			/* page is valid and not being written */
+	SLRU_PAGE_WRITE_IN_PROGRESS,	/* page is being written out */
+} SlruPageStatus;
+
+/*
+ * Shared-memory state
+ *
+ * ControlLock is used to protect access to the other fields, except
+ * latest_page_number, which uses atomics; see comment in slru.c.
+ */
+typedef struct SlruSharedData
+{
+	/* Number of buffers managed by this SLRU structure */
+	int			num_slots;
+
+	/*
+	 * Arrays holding info for each buffer slot.  Page number is undefined
+	 * when status is EMPTY, as is page_lru_count.
+	 */
+	char	  **page_buffer;
+	SlruPageStatus *page_status;
+	bool	   *page_dirty;
+	int64	   *page_number;
+	int		   *page_lru_count;
+
+	/* The buffer_locks protects the I/O on each buffer slots */
+	LWLockPadded *buffer_locks;
+
+	/* Locks to protect the in memory buffer slot access in SLRU bank. */
+	LWLockPadded *bank_locks;
+
+	/*----------
+	 * A bank-wise LRU counter is maintained because we do a victim buffer
+	 * search within a bank. Furthermore, manipulating an individual bank
+	 * counter avoids frequent cache invalidation since we update it every time
+	 * we access the page.
+	 *
+	 * We mark a page "most recently used" by setting
+	 *		page_lru_count[slotno] = ++bank_cur_lru_count[bankno];
+	 * The oldest page in the bank is therefore the one with the highest value
+	 * of
+	 * 		bank_cur_lru_count[bankno] - page_lru_count[slotno]
+	 * The counts will eventually wrap around, but this calculation still
+	 * works as long as no page's age exceeds INT_MAX counts.
+	 *----------
+	 */
+	int		   *bank_cur_lru_count;
+
+	/*
+	 * Optional array of WAL flush LSNs associated with entries in the SLRU
+	 * pages.  If not zero/NULL, we must flush WAL before writing pages (true
+	 * for pg_xact, false for everything else).  group_lsn[] has
+	 * lsn_groups_per_page entries per buffer slot, each containing the
+	 * highest LSN known for a contiguous group of SLRU entries on that slot's
+	 * page.
+	 */
+	XLogRecPtr *group_lsn;
+	int			lsn_groups_per_page;
+
+	/*
+	 * latest_page_number is the page number of the current end of the log;
+	 * this is not critical data, since we use it only to avoid swapping out
+	 * the latest page.
+	 */
+	pg_atomic_uint64 latest_page_number;
+
+	/* SLRU's index for statistics purposes (might not be unique) */
+	int			slru_stats_idx;
+} SlruSharedData;
+
+typedef SlruSharedData *SlruShared;
+
+/*
+ * SlruCtlData is an unshared structure that points to the active information
+ * in shared memory.
+ */
+typedef struct SlruCtlData
+{
+	SlruShared	shared;
+
+	/*
+	 * Bitmask to determine bank number from page number.
+	 */
+	bits16		bank_mask;
+
+	/*
+	 * If true, use long segment file names.  Otherwise, use short file names.
+	 *
+	 * For details about the file name format, see SlruFileName().
+	 */
+	bool		long_segment_names;
+
+	/*
+	 * Which sync handler function to use when handing sync requests over to
+	 * the checkpointer.  SYNC_HANDLER_NONE to disable fsync (eg pg_notify).
+	 */
+	SyncRequestHandler sync_handler;
+
+	/*
+	 * Decide whether a page is "older" for truncation and as a hint for
+	 * evicting pages in LRU order.  Return true if every entry of the first
+	 * argument is older than every entry of the second argument.  Note that
+	 * !PagePrecedes(a,b) && !PagePrecedes(b,a) need not imply a==b; it also
+	 * arises when some entries are older and some are not.  For SLRUs using
+	 * SimpleLruTruncate(), this must use modular arithmetic.  (For others,
+	 * the behavior of this callback has no functional implications.)  Use
+	 * SlruPagePrecedesUnitTests() in SLRUs meeting its criteria.
+	 */
+	bool		(*PagePrecedes) (int64, int64);
+
+	/*
+	 * Dir is set during SimpleLruInit and does not change thereafter. Since
+	 * it's always the same, it doesn't need to be in shared memory.
+	 */
+	char		Dir[64];
+
+} SlruCtlData;
+
+typedef SlruCtlData *SlruCtl;
+
+/*
+ * Get the SLRU bank lock for given SlruCtl and the pageno.
+ *
+ * This lock needs to be acquired to access the slru buffer slots in the
+ * respective bank.
+ */
+static inline LWLock *
+SimpleLruGetBankLock(SlruCtl ctl, int64 pageno)
+{
+	int			bankno;
+
+	bankno = pageno & ctl->bank_mask;
+	return &(ctl->shared->bank_locks[bankno].lock);
+}
+
+extern Size SimpleLruShmemSize(int nslots, int nlsns);
+extern int	SimpleLruAutotuneBuffers(int divisor, int max);
+extern void SimpleLruInit(SlruCtl ctl, const char *name, int nslots, int nlsns,
+						  const char *subdir, int buffer_tranche_id,
+						  int bank_tranche_id, SyncRequestHandler sync_handler,
+						  bool long_segment_names);
+extern int	SimpleLruZeroPage(SlruCtl ctl, int64 pageno);
+extern int	SimpleLruReadPage(SlruCtl ctl, int64 pageno, bool write_ok,
+							  TransactionId xid);
+extern int	SimpleLruReadPage_ReadOnly(SlruCtl ctl, int64 pageno,
+									   TransactionId xid);
+extern void SimpleLruWritePage(SlruCtl ctl, int slotno);
+extern void SimpleLruWriteAll(SlruCtl ctl, bool allow_redirtied);
+#ifdef USE_ASSERT_CHECKING
+extern void SlruPagePrecedesUnitTests(SlruCtl ctl, int per_page);
+#else
+#define SlruPagePrecedesUnitTests(ctl, per_page) do {} while (0)
+#endif
+extern void SimpleLruTruncate(SlruCtl ctl, int64 cutoffPage);
+extern bool SimpleLruDoesPhysicalPageExist(SlruCtl ctl, int64 pageno);
+
+typedef bool (*SlruScanCallback) (SlruCtl ctl, char *filename, int64 segpage,
+								  void *data);
+extern bool SlruScanDirectory(SlruCtl ctl, SlruScanCallback callback, void *data);
+extern void SlruDeleteSegment(SlruCtl ctl, int64 segno);
+
+extern int	SlruSyncFileTag(SlruCtl ctl, const FileTag *ftag, char *path);
+
+/* SlruScanDirectory public callbacks */
+extern bool SlruScanDirCbReportPresence(SlruCtl ctl, char *filename,
+										int64 segpage, void *data);
+extern bool SlruScanDirCbDeleteAll(SlruCtl ctl, char *filename, int64 segpage,
+								   void *data);
+extern bool check_slru_buffers(const char *name, int *newval);
+
+#endif							/* SLRU_H */

data/ext/pg_query/include/postgres/access/stratnum.h

@@ -0,0 +1,85 @@
+/*-------------------------------------------------------------------------
+ *
+ * stratnum.h
+ *	  POSTGRES strategy number definitions.
+ *
+ *
+ * Portions Copyright (c) 1996-2024, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1994, Regents of the University of California
+ *
+ * src/include/access/stratnum.h
+ *
+ *-------------------------------------------------------------------------
+ */
+#ifndef STRATNUM_H
+#define STRATNUM_H
+
+/*
+ * Strategy numbers identify the semantics that particular operators have
+ * with respect to particular operator classes.  In some cases a strategy
+ * subtype (an OID) is used as further information.
+ */
+typedef uint16 StrategyNumber;
+
+#define InvalidStrategy ((StrategyNumber) 0)
+
+/*
+ * Strategy numbers for B-tree indexes.
+ */
+#define BTLessStrategyNumber			1
+#define BTLessEqualStrategyNumber		2
+#define BTEqualStrategyNumber			3
+#define BTGreaterEqualStrategyNumber	4
+#define BTGreaterStrategyNumber			5
+
+#define BTMaxStrategyNumber				5
+
+/*
+ *	Strategy numbers for hash indexes. There's only one valid strategy for
+ *	hashing: equality.
+ */
+#define HTEqualStrategyNumber			1
+
+#define HTMaxStrategyNumber				1
+
+/*
+ * Strategy numbers common to (some) GiST, SP-GiST and BRIN opclasses.
+ *
+ * The first few of these come from the R-Tree indexing method (hence the
+ * names); the others have been added over time as they have been needed.
+ */
+#define RTLeftStrategyNumber			1	/* for << */
+#define RTOverLeftStrategyNumber		2	/* for &< */
+#define RTOverlapStrategyNumber			3	/* for && */
+#define RTOverRightStrategyNumber		4	/* for &> */
+#define RTRightStrategyNumber			5	/* for >> */
+#define RTSameStrategyNumber			6	/* for ~= */
+#define RTContainsStrategyNumber		7	/* for @> */
+#define RTContainedByStrategyNumber		8	/* for <@ */
+#define RTOverBelowStrategyNumber		9	/* for &<| */
+#define RTBelowStrategyNumber			10	/* for <<| */
+#define RTAboveStrategyNumber			11	/* for |>> */
+#define RTOverAboveStrategyNumber		12	/* for |&> */
+#define RTOldContainsStrategyNumber		13	/* for old spelling of @> */
+#define RTOldContainedByStrategyNumber	14	/* for old spelling of <@ */
+#define RTKNNSearchStrategyNumber		15	/* for <-> (distance) */
+#define RTContainsElemStrategyNumber	16	/* for range types @> elem */
+#define RTAdjacentStrategyNumber		17	/* for -|- */
+#define RTEqualStrategyNumber			18	/* for = */
+#define RTNotEqualStrategyNumber		19	/* for != */
+#define RTLessStrategyNumber			20	/* for < */
+#define RTLessEqualStrategyNumber		21	/* for <= */
+#define RTGreaterStrategyNumber			22	/* for > */
+#define RTGreaterEqualStrategyNumber	23	/* for >= */
+#define RTSubStrategyNumber				24	/* for inet >> */
+#define RTSubEqualStrategyNumber		25	/* for inet <<= */
+#define RTSuperStrategyNumber			26	/* for inet << */
+#define RTSuperEqualStrategyNumber		27	/* for inet >>= */
+#define RTPrefixStrategyNumber			28	/* for text ^@ */
+#define RTOldBelowStrategyNumber		29	/* for old spelling of <<| */
+#define RTOldAboveStrategyNumber		30	/* for old spelling of |>> */
+
+#define RTMaxStrategyNumber				30
+
+
+#endif							/* STRATNUM_H */

data/ext/pg_query/include/postgres/access/sysattr.h

@@ -0,0 +1,29 @@
+/*-------------------------------------------------------------------------
+ *
+ * sysattr.h
+ *	  POSTGRES system attribute definitions.
+ *
+ *
+ * Portions Copyright (c) 1996-2024, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1994, Regents of the University of California
+ *
+ * src/include/access/sysattr.h
+ *
+ *-------------------------------------------------------------------------
+ */
+#ifndef SYSATTR_H
+#define SYSATTR_H
+
+
+/*
+ * Attribute numbers for the system-defined attributes
+ */
+#define SelfItemPointerAttributeNumber			(-1)
+#define MinTransactionIdAttributeNumber			(-2)
+#define MinCommandIdAttributeNumber				(-3)
+#define MaxTransactionIdAttributeNumber			(-4)
+#define MaxCommandIdAttributeNumber				(-5)
+#define TableOidAttributeNumber					(-6)
+#define FirstLowInvalidHeapAttributeNumber		(-7)
+
+#endif							/* SYSATTR_H */

data/ext/pg_query/include/postgres/access/table.h

@@ -0,0 +1,28 @@
+/*-------------------------------------------------------------------------
+ *
+ * table.h
+ *	  Generic routines for table related code.
+ *
+ *
+ * Portions Copyright (c) 1996-2024, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1994, Regents of the University of California
+ *
+ * src/include/access/table.h
+ *
+ *-------------------------------------------------------------------------
+ */
+#ifndef TABLE_H
+#define TABLE_H
+
+#include "nodes/primnodes.h"
+#include "storage/lockdefs.h"
+#include "utils/relcache.h"
+
+extern Relation table_open(Oid relationId, LOCKMODE lockmode);
+extern Relation table_openrv(const RangeVar *relation, LOCKMODE lockmode);
+extern Relation table_openrv_extended(const RangeVar *relation,
+									  LOCKMODE lockmode, bool missing_ok);
+extern Relation try_table_open(Oid relationId, LOCKMODE lockmode);
+extern void table_close(Relation relation, LOCKMODE lockmode);
+
+#endif							/* TABLE_H */