pg_query 5.0.0 → 6.0.0

data/ext/pg_query/include/access/tupdesc.h

@@ -1,154 +0,0 @@
-/*-------------------------------------------------------------------------
- *
- * tupdesc.h
- *	  POSTGRES tuple descriptor definitions.
- *
- *
- * Portions Copyright (c) 1996-2023, PostgreSQL Global Development Group
- * Portions Copyright (c) 1994, Regents of the University of California
- *
- * src/include/access/tupdesc.h
- *
- *-------------------------------------------------------------------------
- */
-#ifndef TUPDESC_H
-#define TUPDESC_H
-
-#include "access/attnum.h"
-#include "catalog/pg_attribute.h"
-#include "nodes/pg_list.h"
-
-
-typedef struct AttrDefault
-{
-	AttrNumber	adnum;
-	char	   *adbin;			/* nodeToString representation of expr */
-} AttrDefault;
-
-typedef struct ConstrCheck
-{
-	char	   *ccname;
-	char	   *ccbin;			/* nodeToString representation of expr */
-	bool		ccvalid;
-	bool		ccnoinherit;	/* this is a non-inheritable constraint */
-} ConstrCheck;
-
-/* This structure contains constraints of a tuple */
-typedef struct TupleConstr
-{
-	AttrDefault *defval;		/* array */
-	ConstrCheck *check;			/* array */
-	struct AttrMissing *missing;	/* missing attributes values, NULL if none */
-	uint16		num_defval;
-	uint16		num_check;
-	bool		has_not_null;
-	bool		has_generated_stored;
-} TupleConstr;
-
-/*
- * This struct is passed around within the backend to describe the structure
- * of tuples.  For tuples coming from on-disk relations, the information is
- * collected from the pg_attribute, pg_attrdef, and pg_constraint catalogs.
- * Transient row types (such as the result of a join query) have anonymous
- * TupleDesc structs that generally omit any constraint info; therefore the
- * structure is designed to let the constraints be omitted efficiently.
- *
- * Note that only user attributes, not system attributes, are mentioned in
- * TupleDesc.
- *
- * If the tupdesc is known to correspond to a named rowtype (such as a table's
- * rowtype) then tdtypeid identifies that type and tdtypmod is -1.  Otherwise
- * tdtypeid is RECORDOID, and tdtypmod can be either -1 for a fully anonymous
- * row type, or a value >= 0 to allow the rowtype to be looked up in the
- * typcache.c type cache.
- *
- * Note that tdtypeid is never the OID of a domain over composite, even if
- * we are dealing with values that are known (at some higher level) to be of
- * a domain-over-composite type.  This is because tdtypeid/tdtypmod need to
- * match up with the type labeling of composite Datums, and those are never
- * explicitly marked as being of a domain type, either.
- *
- * Tuple descriptors that live in caches (relcache or typcache, at present)
- * are reference-counted: they can be deleted when their reference count goes
- * to zero.  Tuple descriptors created by the executor need no reference
- * counting, however: they are simply created in the appropriate memory
- * context and go away when the context is freed.  We set the tdrefcount
- * field of such a descriptor to -1, while reference-counted descriptors
- * always have tdrefcount >= 0.
- */
-typedef struct TupleDescData
-{
-	int			natts;			/* number of attributes in the tuple */
-	Oid			tdtypeid;		/* composite type ID for tuple type */
-	int32		tdtypmod;		/* typmod for tuple type */
-	int			tdrefcount;		/* reference count, or -1 if not counting */
-	TupleConstr *constr;		/* constraints, or NULL if none */
-	/* attrs[N] is the description of Attribute Number N+1 */
-	FormData_pg_attribute attrs[FLEXIBLE_ARRAY_MEMBER];
-}			TupleDescData;
-typedef struct TupleDescData *TupleDesc;
-
-/* Accessor for the i'th attribute of tupdesc. */
-#define TupleDescAttr(tupdesc, i) (&(tupdesc)->attrs[(i)])
-
-extern TupleDesc CreateTemplateTupleDesc(int natts);
-
-extern TupleDesc CreateTupleDesc(int natts, Form_pg_attribute *attrs);
-
-extern TupleDesc CreateTupleDescCopy(TupleDesc tupdesc);
-
-extern TupleDesc CreateTupleDescCopyConstr(TupleDesc tupdesc);
-
-#define TupleDescSize(src) \
-	(offsetof(struct TupleDescData, attrs) + \
-	 (src)->natts * sizeof(FormData_pg_attribute))
-
-extern void TupleDescCopy(TupleDesc dst, TupleDesc src);
-
-extern void TupleDescCopyEntry(TupleDesc dst, AttrNumber dstAttno,
-							   TupleDesc src, AttrNumber srcAttno);
-
-extern void FreeTupleDesc(TupleDesc tupdesc);
-
-extern void IncrTupleDescRefCount(TupleDesc tupdesc);
-extern void DecrTupleDescRefCount(TupleDesc tupdesc);
-
-#define PinTupleDesc(tupdesc) \
-	do { \
-		if ((tupdesc)->tdrefcount >= 0) \
-			IncrTupleDescRefCount(tupdesc); \
-	} while (0)
-
-#define ReleaseTupleDesc(tupdesc) \
-	do { \
-		if ((tupdesc)->tdrefcount >= 0) \
-			DecrTupleDescRefCount(tupdesc); \
-	} while (0)
-
-extern bool equalTupleDescs(TupleDesc tupdesc1, TupleDesc tupdesc2);
-
-extern uint32 hashTupleDesc(TupleDesc desc);
-
-extern void TupleDescInitEntry(TupleDesc desc,
-							   AttrNumber attributeNumber,
-							   const char *attributeName,
-							   Oid oidtypeid,
-							   int32 typmod,
-							   int attdim);
-
-extern void TupleDescInitBuiltinEntry(TupleDesc desc,
-									  AttrNumber attributeNumber,
-									  const char *attributeName,
-									  Oid oidtypeid,
-									  int32 typmod,
-									  int attdim);
-
-extern void TupleDescInitEntryCollation(TupleDesc desc,
-										AttrNumber attributeNumber,
-										Oid collationid);
-
-extern TupleDesc BuildDescForRelation(List *schema);
-
-extern TupleDesc BuildDescFromLists(List *names, List *types, List *typmods, List *collations);
-
-#endif							/* TUPDESC_H */

data/ext/pg_query/include/access/tupmacs.h

@@ -1,207 +0,0 @@
-/*-------------------------------------------------------------------------
- *
- * tupmacs.h
- *	  Tuple macros used by both index tuples and heap tuples.
- *
- *
- * Portions Copyright (c) 1996-2023, PostgreSQL Global Development Group
- * Portions Copyright (c) 1994, Regents of the University of California
- *
- * src/include/access/tupmacs.h
- *
- *-------------------------------------------------------------------------
- */
-#ifndef TUPMACS_H
-#define TUPMACS_H
-
-#include "catalog/pg_type_d.h"	/* for TYPALIGN macros */
-
-
-/*
- * Check a tuple's null bitmap to determine whether the attribute is null.
- * Note that a 0 in the null bitmap indicates a null, while 1 indicates
- * non-null.
- */
-static inline bool
-att_isnull(int ATT, const bits8 *BITS)
-{
-	return !(BITS[ATT >> 3] & (1 << (ATT & 0x07)));
-}
-
-#ifndef FRONTEND
-/*
- * Given a Form_pg_attribute and a pointer into a tuple's data area,
- * return the correct value or pointer.
- *
- * We return a Datum value in all cases.  If the attribute has "byval" false,
- * we return the same pointer into the tuple data area that we're passed.
- * Otherwise, we return the correct number of bytes fetched from the data
- * area and extended to Datum form.
- *
- * On machines where Datum is 8 bytes, we support fetching 8-byte byval
- * attributes; otherwise, only 1, 2, and 4-byte values are supported.
- *
- * Note that T must already be properly aligned for this to work correctly.
- */
-#define fetchatt(A,T) fetch_att(T, (A)->attbyval, (A)->attlen)
-
-/*
- * Same, but work from byval/len parameters rather than Form_pg_attribute.
- */
-static inline Datum
-fetch_att(const void *T, bool attbyval, int attlen)
-{
-	if (attbyval)
-	{
-		switch (attlen)
-		{
-			case sizeof(char):
-				return CharGetDatum(*((const char *) T));
-			case sizeof(int16):
-				return Int16GetDatum(*((const int16 *) T));
-			case sizeof(int32):
-				return Int32GetDatum(*((const int32 *) T));
-#if SIZEOF_DATUM == 8
-			case sizeof(Datum):
-				return *((const Datum *) T);
-#endif
-			default:
-				elog(ERROR, "unsupported byval length: %d", attlen);
-				return 0;
-		}
-	}
-	else
-		return PointerGetDatum(T);
-}
-#endif							/* FRONTEND */
-
-/*
- * att_align_datum aligns the given offset as needed for a datum of alignment
- * requirement attalign and typlen attlen.  attdatum is the Datum variable
- * we intend to pack into a tuple (it's only accessed if we are dealing with
- * a varlena type).  Note that this assumes the Datum will be stored as-is;
- * callers that are intending to convert non-short varlena datums to short
- * format have to account for that themselves.
- */
-#define att_align_datum(cur_offset, attalign, attlen, attdatum) \
-( \
-	((attlen) == -1 && VARATT_IS_SHORT(DatumGetPointer(attdatum))) ? \
-	(uintptr_t) (cur_offset) : \
-	att_align_nominal(cur_offset, attalign) \
-)
-
-/*
- * att_align_pointer performs the same calculation as att_align_datum,
- * but is used when walking a tuple.  attptr is the current actual data
- * pointer; when accessing a varlena field we have to "peek" to see if we
- * are looking at a pad byte or the first byte of a 1-byte-header datum.
- * (A zero byte must be either a pad byte, or the first byte of a correctly
- * aligned 4-byte length word; in either case we can align safely.  A non-zero
- * byte must be either a 1-byte length word, or the first byte of a correctly
- * aligned 4-byte length word; in either case we need not align.)
- *
- * Note: some callers pass a "char *" pointer for cur_offset.  This is
- * a bit of a hack but should work all right as long as uintptr_t is the
- * correct width.
- */
-#define att_align_pointer(cur_offset, attalign, attlen, attptr) \
-( \
-	((attlen) == -1 && VARATT_NOT_PAD_BYTE(attptr)) ? \
-	(uintptr_t) (cur_offset) : \
-	att_align_nominal(cur_offset, attalign) \
-)
-
-/*
- * att_align_nominal aligns the given offset as needed for a datum of alignment
- * requirement attalign, ignoring any consideration of packed varlena datums.
- * There are three main use cases for using this macro directly:
- *	* we know that the att in question is not varlena (attlen != -1);
- *	  in this case it is cheaper than the above macros and just as good.
- *	* we need to estimate alignment padding cost abstractly, ie without
- *	  reference to a real tuple.  We must assume the worst case that
- *	  all varlenas are aligned.
- *	* within arrays and multiranges, we unconditionally align varlenas (XXX this
- *	  should be revisited, probably).
- *
- * The attalign cases are tested in what is hopefully something like their
- * frequency of occurrence.
- */
-#define att_align_nominal(cur_offset, attalign) \
-( \
-	((attalign) == TYPALIGN_INT) ? INTALIGN(cur_offset) : \
-	 (((attalign) == TYPALIGN_CHAR) ? (uintptr_t) (cur_offset) : \
-	  (((attalign) == TYPALIGN_DOUBLE) ? DOUBLEALIGN(cur_offset) : \
-	   ( \
-			AssertMacro((attalign) == TYPALIGN_SHORT), \
-			SHORTALIGN(cur_offset) \
-	   ))) \
-)
-
-/*
- * att_addlength_datum increments the given offset by the space needed for
- * the given Datum variable.  attdatum is only accessed if we are dealing
- * with a variable-length attribute.
- */
-#define att_addlength_datum(cur_offset, attlen, attdatum) \
-	att_addlength_pointer(cur_offset, attlen, DatumGetPointer(attdatum))
-
-/*
- * att_addlength_pointer performs the same calculation as att_addlength_datum,
- * but is used when walking a tuple --- attptr is the pointer to the field
- * within the tuple.
- *
- * Note: some callers pass a "char *" pointer for cur_offset.  This is
- * actually perfectly OK, but probably should be cleaned up along with
- * the same practice for att_align_pointer.
- */
-#define att_addlength_pointer(cur_offset, attlen, attptr) \
-( \
-	((attlen) > 0) ? \
-	( \
-		(cur_offset) + (attlen) \
-	) \
-	: (((attlen) == -1) ? \
-	( \
-		(cur_offset) + VARSIZE_ANY(attptr) \
-	) \
-	: \
-	( \
-		AssertMacro((attlen) == -2), \
-		(cur_offset) + (strlen((char *) (attptr)) + 1) \
-	)) \
-)
-
-#ifndef FRONTEND
-/*
- * store_att_byval is a partial inverse of fetch_att: store a given Datum
- * value into a tuple data area at the specified address.  However, it only
- * handles the byval case, because in typical usage the caller needs to
- * distinguish by-val and by-ref cases anyway, and so a do-it-all function
- * wouldn't be convenient.
- */
-static inline void
-store_att_byval(void *T, Datum newdatum, int attlen)
-{
-	switch (attlen)
-	{
-		case sizeof(char):
-			*(char *) T = DatumGetChar(newdatum);
-			break;
-		case sizeof(int16):
-			*(int16 *) T = DatumGetInt16(newdatum);
-			break;
-		case sizeof(int32):
-			*(int32 *) T = DatumGetInt32(newdatum);
-			break;
-#if SIZEOF_DATUM == 8
-		case sizeof(Datum):
-			*(Datum *) T = newdatum;
-			break;
-#endif
-		default:
-			elog(ERROR, "unsupported byval length: %d", attlen);
-	}
-}
-#endif							/* FRONTEND */
-
-#endif							/* TUPMACS_H */

data/ext/pg_query/include/access/twophase.h

@@ -1,65 +0,0 @@
-/*-------------------------------------------------------------------------
- *
- * twophase.h
- *	  Two-phase-commit related declarations.
- *
- *
- * Portions Copyright (c) 1996-2023, PostgreSQL Global Development Group
- * Portions Copyright (c) 1994, Regents of the University of California
- *
- * src/include/access/twophase.h
- *
- *-------------------------------------------------------------------------
- */
-#ifndef TWOPHASE_H
-#define TWOPHASE_H
-
-#include "access/xact.h"
-#include "access/xlogdefs.h"
-#include "datatype/timestamp.h"
-#include "storage/lock.h"
-
-/*
- * GlobalTransactionData is defined in twophase.c; other places have no
- * business knowing the internal definition.
- */
-typedef struct GlobalTransactionData *GlobalTransaction;
-
-/* GUC variable */
-extern PGDLLIMPORT int max_prepared_xacts;
-
-extern Size TwoPhaseShmemSize(void);
-extern void TwoPhaseShmemInit(void);
-
-extern void AtAbort_Twophase(void);
-extern void PostPrepare_Twophase(void);
-
-extern TransactionId TwoPhaseGetXidByVirtualXID(VirtualTransactionId vxid,
-												bool *have_more);
-extern PGPROC *TwoPhaseGetDummyProc(TransactionId xid, bool lock_held);
-extern BackendId TwoPhaseGetDummyBackendId(TransactionId xid, bool lock_held);
-
-extern GlobalTransaction MarkAsPreparing(TransactionId xid, const char *gid,
-										 TimestampTz prepared_at,
-										 Oid owner, Oid databaseid);
-
-extern void StartPrepare(GlobalTransaction gxact);
-extern void EndPrepare(GlobalTransaction gxact);
-extern bool StandbyTransactionIdIsPrepared(TransactionId xid);
-
-extern TransactionId PrescanPreparedTransactions(TransactionId **xids_p,
-												 int *nxids_p);
-extern void StandbyRecoverPreparedTransactions(void);
-extern void RecoverPreparedTransactions(void);
-
-extern void CheckPointTwoPhase(XLogRecPtr redo_horizon);
-
-extern void FinishPreparedTransaction(const char *gid, bool isCommit);
-
-extern void PrepareRedoAdd(char *buf, XLogRecPtr start_lsn,
-						   XLogRecPtr end_lsn, RepOriginId origin_id);
-extern void PrepareRedoRemove(TransactionId xid, bool giveWarning);
-extern void restoreTwoPhaseData(void);
-extern bool LookupGXact(const char *gid, XLogRecPtr prepare_end_lsn,
-						TimestampTz origin_prepare_timestamp);
-#endif							/* TWOPHASE_H */