pg_query 5.0.0 → 6.0.0

data/ext/pg_query/include/mb/pg_wchar.h

@@ -1,772 +0,0 @@
-/*-------------------------------------------------------------------------
- *
- * pg_wchar.h
- *	  multibyte-character support
- *
- * Portions Copyright (c) 1996-2023, PostgreSQL Global Development Group
- * Portions Copyright (c) 1994, Regents of the University of California
- *
- * src/include/mb/pg_wchar.h
- *
- *	NOTES
- *		This is used both by the backend and by frontends, but should not be
- *		included by libpq client programs.  In particular, a libpq client
- *		should not assume that the encoding IDs used by the version of libpq
- *		it's linked to match up with the IDs declared here.
- *
- *-------------------------------------------------------------------------
- */
-#ifndef PG_WCHAR_H
-#define PG_WCHAR_H
-
-#include "port/simd.h"
-
-/*
- * The pg_wchar type
- */
-typedef unsigned int pg_wchar;
-
-/*
- * Maximum byte length of multibyte characters in any backend encoding
- */
-#define MAX_MULTIBYTE_CHAR_LEN	4
-
-/*
- * various definitions for EUC
- */
-#define SS2 0x8e				/* single shift 2 (JIS0201) */
-#define SS3 0x8f				/* single shift 3 (JIS0212) */
-
-/*
- * SJIS validation macros
- */
-#define ISSJISHEAD(c) (((c) >= 0x81 && (c) <= 0x9f) || ((c) >= 0xe0 && (c) <= 0xfc))
-#define ISSJISTAIL(c) (((c) >= 0x40 && (c) <= 0x7e) || ((c) >= 0x80 && (c) <= 0xfc))
-
-/*----------------------------------------------------
- * MULE Internal Encoding (MIC)
- *
- * This encoding follows the design used within XEmacs; it is meant to
- * subsume many externally-defined character sets.  Each character includes
- * identification of the character set it belongs to, so the encoding is
- * general but somewhat bulky.
- *
- * Currently PostgreSQL supports 5 types of MULE character sets:
- *
- * 1) 1-byte ASCII characters.  Each byte is below 0x80.
- *
- * 2) "Official" single byte charsets such as ISO-8859-1 (Latin1).
- *	  Each MULE character consists of 2 bytes: LC1 + C1, where LC1 is
- *	  an identifier for the charset (in the range 0x81 to 0x8d) and C1
- *	  is the character code (in the range 0xa0 to 0xff).
- *
- * 3) "Private" single byte charsets such as SISHENG.  Each MULE
- *	  character consists of 3 bytes: LCPRV1 + LC12 + C1, where LCPRV1
- *	  is a private-charset flag, LC12 is an identifier for the charset,
- *	  and C1 is the character code (in the range 0xa0 to 0xff).
- *	  LCPRV1 is either 0x9a (if LC12 is in the range 0xa0 to 0xdf)
- *	  or 0x9b (if LC12 is in the range 0xe0 to 0xef).
- *
- * 4) "Official" multibyte charsets such as JIS X0208.  Each MULE
- *	  character consists of 3 bytes: LC2 + C1 + C2, where LC2 is
- *	  an identifier for the charset (in the range 0x90 to 0x99) and C1
- *	  and C2 form the character code (each in the range 0xa0 to 0xff).
- *
- * 5) "Private" multibyte charsets such as CNS 11643-1992 Plane 3.
- *	  Each MULE character consists of 4 bytes: LCPRV2 + LC22 + C1 + C2,
- *	  where LCPRV2 is a private-charset flag, LC22 is an identifier for
- *	  the charset, and C1 and C2 form the character code (each in the range
- *	  0xa0 to 0xff).  LCPRV2 is either 0x9c (if LC22 is in the range 0xf0
- *	  to 0xf4) or 0x9d (if LC22 is in the range 0xf5 to 0xfe).
- *
- * "Official" encodings are those that have been assigned code numbers by
- * the XEmacs project; "private" encodings have Postgres-specific charset
- * identifiers.
- *
- * See the "XEmacs Internals Manual", available at http://www.xemacs.org,
- * for more details.  Note that for historical reasons, Postgres'
- * private-charset flag values do not match what XEmacs says they should be,
- * so this isn't really exactly MULE (not that private charsets would be
- * interoperable anyway).
- *
- * Note that XEmacs's implementation is different from what emacs does.
- * We follow emacs's implementation, rather than XEmacs's.
- *----------------------------------------------------
- */
-
-/*
- * Charset identifiers (also called "leading bytes" in the MULE documentation)
- */
-
-/*
- * Charset IDs for official single byte encodings (0x81-0x8e)
- */
-#define LC_ISO8859_1		0x81	/* ISO8859 Latin 1 */
-#define LC_ISO8859_2		0x82	/* ISO8859 Latin 2 */
-#define LC_ISO8859_3		0x83	/* ISO8859 Latin 3 */
-#define LC_ISO8859_4		0x84	/* ISO8859 Latin 4 */
-#define LC_TIS620			0x85	/* Thai (not supported yet) */
-#define LC_ISO8859_7		0x86	/* Greek (not supported yet) */
-#define LC_ISO8859_6		0x87	/* Arabic (not supported yet) */
-#define LC_ISO8859_8		0x88	/* Hebrew (not supported yet) */
-#define LC_JISX0201K		0x89	/* Japanese 1 byte kana */
-#define LC_JISX0201R		0x8a	/* Japanese 1 byte Roman */
-/* Note that 0x8b seems to be unused as of Emacs 20.7.
- * However, there might be a chance that 0x8b could be used
- * in later versions of Emacs.
- */
-#define LC_KOI8_R			0x8b	/* Cyrillic KOI8-R */
-#define LC_ISO8859_5		0x8c	/* ISO8859 Cyrillic */
-#define LC_ISO8859_9		0x8d	/* ISO8859 Latin 5 (not supported yet) */
-#define LC_ISO8859_15		0x8e	/* ISO8859 Latin 15 (not supported yet) */
-/* #define CONTROL_1		0x8f	control characters (unused) */
-
-/* Is a leading byte for "official" single byte encodings? */
-#define IS_LC1(c)	((unsigned char)(c) >= 0x81 && (unsigned char)(c) <= 0x8d)
-
-/*
- * Charset IDs for official multibyte encodings (0x90-0x99)
- * 0x9a-0x9d are free. 0x9e and 0x9f are reserved.
- */
-#define LC_JISX0208_1978	0x90	/* Japanese Kanji, old JIS (not supported) */
-#define LC_GB2312_80		0x91	/* Chinese */
-#define LC_JISX0208			0x92	/* Japanese Kanji (JIS X 0208) */
-#define LC_KS5601			0x93	/* Korean */
-#define LC_JISX0212			0x94	/* Japanese Kanji (JIS X 0212) */
-#define LC_CNS11643_1		0x95	/* CNS 11643-1992 Plane 1 */
-#define LC_CNS11643_2		0x96	/* CNS 11643-1992 Plane 2 */
-#define LC_JISX0213_1		0x97	/* Japanese Kanji (JIS X 0213 Plane 1)
-									 * (not supported) */
-#define LC_BIG5_1			0x98	/* Plane 1 Chinese traditional (not
-									 * supported) */
-#define LC_BIG5_2			0x99	/* Plane 1 Chinese traditional (not
-									 * supported) */
-
-/* Is a leading byte for "official" multibyte encodings? */
-#define IS_LC2(c)	((unsigned char)(c) >= 0x90 && (unsigned char)(c) <= 0x99)
-
-/*
- * Postgres-specific prefix bytes for "private" single byte encodings
- * (According to the MULE docs, we should be using 0x9e for this)
- */
-#define LCPRV1_A		0x9a
-#define LCPRV1_B		0x9b
-#define IS_LCPRV1(c)	((unsigned char)(c) == LCPRV1_A || (unsigned char)(c) == LCPRV1_B)
-#define IS_LCPRV1_A_RANGE(c)	\
-	((unsigned char)(c) >= 0xa0 && (unsigned char)(c) <= 0xdf)
-#define IS_LCPRV1_B_RANGE(c)	\
-	((unsigned char)(c) >= 0xe0 && (unsigned char)(c) <= 0xef)
-
-/*
- * Postgres-specific prefix bytes for "private" multibyte encodings
- * (According to the MULE docs, we should be using 0x9f for this)
- */
-#define LCPRV2_A		0x9c
-#define LCPRV2_B		0x9d
-#define IS_LCPRV2(c)	((unsigned char)(c) == LCPRV2_A || (unsigned char)(c) == LCPRV2_B)
-#define IS_LCPRV2_A_RANGE(c)	\
-	((unsigned char)(c) >= 0xf0 && (unsigned char)(c) <= 0xf4)
-#define IS_LCPRV2_B_RANGE(c)	\
-	((unsigned char)(c) >= 0xf5 && (unsigned char)(c) <= 0xfe)
-
-/*
- * Charset IDs for private single byte encodings (0xa0-0xef)
- */
-#define LC_SISHENG			0xa0	/* Chinese SiSheng characters for
-									 * PinYin/ZhuYin (not supported) */
-#define LC_IPA				0xa1	/* IPA (International Phonetic
-									 * Association) (not supported) */
-#define LC_VISCII_LOWER		0xa2	/* Vietnamese VISCII1.1 lower-case (not
-									 * supported) */
-#define LC_VISCII_UPPER		0xa3	/* Vietnamese VISCII1.1 upper-case (not
-									 * supported) */
-#define LC_ARABIC_DIGIT		0xa4	/* Arabic digit (not supported) */
-#define LC_ARABIC_1_COLUMN	0xa5	/* Arabic 1-column (not supported) */
-#define LC_ASCII_RIGHT_TO_LEFT	0xa6	/* ASCII (left half of ISO8859-1) with
-										 * right-to-left direction (not
-										 * supported) */
-#define LC_LAO				0xa7	/* Lao characters (ISO10646 0E80..0EDF)
-									 * (not supported) */
-#define LC_ARABIC_2_COLUMN	0xa8	/* Arabic 1-column (not supported) */
-
-/*
- * Charset IDs for private multibyte encodings (0xf0-0xff)
- */
-#define LC_INDIAN_1_COLUMN	0xf0	/* Indian charset for 1-column width
-									 * glyphs (not supported) */
-#define LC_TIBETAN_1_COLUMN 0xf1	/* Tibetan 1-column width glyphs (not
-									 * supported) */
-#define LC_UNICODE_SUBSET_2 0xf2	/* Unicode characters of the range
-									 * U+2500..U+33FF. (not supported) */
-#define LC_UNICODE_SUBSET_3 0xf3	/* Unicode characters of the range
-									 * U+E000..U+FFFF. (not supported) */
-#define LC_UNICODE_SUBSET	0xf4	/* Unicode characters of the range
-									 * U+0100..U+24FF. (not supported) */
-#define LC_ETHIOPIC			0xf5	/* Ethiopic characters (not supported) */
-#define LC_CNS11643_3		0xf6	/* CNS 11643-1992 Plane 3 */
-#define LC_CNS11643_4		0xf7	/* CNS 11643-1992 Plane 4 */
-#define LC_CNS11643_5		0xf8	/* CNS 11643-1992 Plane 5 */
-#define LC_CNS11643_6		0xf9	/* CNS 11643-1992 Plane 6 */
-#define LC_CNS11643_7		0xfa	/* CNS 11643-1992 Plane 7 */
-#define LC_INDIAN_2_COLUMN	0xfb	/* Indian charset for 2-column width
-									 * glyphs (not supported) */
-#define LC_TIBETAN			0xfc	/* Tibetan (not supported) */
-/* #define FREE				0xfd	free (unused) */
-/* #define FREE				0xfe	free (unused) */
-/* #define FREE				0xff	free (unused) */
-
-/*----------------------------------------------------
- * end of MULE stuff
- *----------------------------------------------------
- */
-
-/*
- * PostgreSQL encoding identifiers
- *
- * WARNING: the order of this enum must be same as order of entries
- *			in the pg_enc2name_tbl[] array (in src/common/encnames.c), and
- *			in the pg_wchar_table[] array (in src/common/wchar.c)!
- *
- *			If you add some encoding don't forget to check
- *			PG_ENCODING_BE_LAST macro.
- *
- * PG_SQL_ASCII is default encoding and must be = 0.
- *
- * XXX	We must avoid renumbering any backend encoding until libpq's major
- * version number is increased beyond 5; it turns out that the backend
- * encoding IDs are effectively part of libpq's ABI as far as 8.2 initdb and
- * psql are concerned.
- */
-typedef enum pg_enc
-{
-	PG_SQL_ASCII = 0,			/* SQL/ASCII */
-	PG_EUC_JP,					/* EUC for Japanese */
-	PG_EUC_CN,					/* EUC for Chinese */
-	PG_EUC_KR,					/* EUC for Korean */
-	PG_EUC_TW,					/* EUC for Taiwan */
-	PG_EUC_JIS_2004,			/* EUC-JIS-2004 */
-	PG_UTF8,					/* Unicode UTF8 */
-	PG_MULE_INTERNAL,			/* Mule internal code */
-	PG_LATIN1,					/* ISO-8859-1 Latin 1 */
-	PG_LATIN2,					/* ISO-8859-2 Latin 2 */
-	PG_LATIN3,					/* ISO-8859-3 Latin 3 */
-	PG_LATIN4,					/* ISO-8859-4 Latin 4 */
-	PG_LATIN5,					/* ISO-8859-9 Latin 5 */
-	PG_LATIN6,					/* ISO-8859-10 Latin6 */
-	PG_LATIN7,					/* ISO-8859-13 Latin7 */
-	PG_LATIN8,					/* ISO-8859-14 Latin8 */
-	PG_LATIN9,					/* ISO-8859-15 Latin9 */
-	PG_LATIN10,					/* ISO-8859-16 Latin10 */
-	PG_WIN1256,					/* windows-1256 */
-	PG_WIN1258,					/* Windows-1258 */
-	PG_WIN866,					/* (MS-DOS CP866) */
-	PG_WIN874,					/* windows-874 */
-	PG_KOI8R,					/* KOI8-R */
-	PG_WIN1251,					/* windows-1251 */
-	PG_WIN1252,					/* windows-1252 */
-	PG_ISO_8859_5,				/* ISO-8859-5 */
-	PG_ISO_8859_6,				/* ISO-8859-6 */
-	PG_ISO_8859_7,				/* ISO-8859-7 */
-	PG_ISO_8859_8,				/* ISO-8859-8 */
-	PG_WIN1250,					/* windows-1250 */
-	PG_WIN1253,					/* windows-1253 */
-	PG_WIN1254,					/* windows-1254 */
-	PG_WIN1255,					/* windows-1255 */
-	PG_WIN1257,					/* windows-1257 */
-	PG_KOI8U,					/* KOI8-U */
-	/* PG_ENCODING_BE_LAST points to the above entry */
-
-	/* followings are for client encoding only */
-	PG_SJIS,					/* Shift JIS (Windows-932) */
-	PG_BIG5,					/* Big5 (Windows-950) */
-	PG_GBK,						/* GBK (Windows-936) */
-	PG_UHC,						/* UHC (Windows-949) */
-	PG_GB18030,					/* GB18030 */
-	PG_JOHAB,					/* EUC for Korean JOHAB */
-	PG_SHIFT_JIS_2004,			/* Shift-JIS-2004 */
-	_PG_LAST_ENCODING_			/* mark only */
-
-} pg_enc;
-
-#define PG_ENCODING_BE_LAST PG_KOI8U
-
-/*
- * Please use these tests before access to pg_enc2name_tbl[]
- * or to other places...
- */
-#define PG_VALID_BE_ENCODING(_enc) \
-		((_enc) >= 0 && (_enc) <= PG_ENCODING_BE_LAST)
-
-#define PG_ENCODING_IS_CLIENT_ONLY(_enc) \
-		((_enc) > PG_ENCODING_BE_LAST && (_enc) < _PG_LAST_ENCODING_)
-
-#define PG_VALID_ENCODING(_enc) \
-		((_enc) >= 0 && (_enc) < _PG_LAST_ENCODING_)
-
-/* On FE are possible all encodings */
-#define PG_VALID_FE_ENCODING(_enc)	PG_VALID_ENCODING(_enc)
-
-/*
- * When converting strings between different encodings, we assume that space
- * for converted result is 4-to-1 growth in the worst case.  The rate for
- * currently supported encoding pairs are within 3 (SJIS JIS X0201 half width
- * kana -> UTF8 is the worst case).  So "4" should be enough for the moment.
- *
- * Note that this is not the same as the maximum character width in any
- * particular encoding.
- */
-#define MAX_CONVERSION_GROWTH  4
-
-/*
- * Maximum byte length of a string that's required in any encoding to convert
- * at least one character to any other encoding.  In other words, if you feed
- * MAX_CONVERSION_INPUT_LENGTH bytes to any encoding conversion function, it
- * is guaranteed to be able to convert something without needing more input
- * (assuming the input is valid).
- *
- * Currently, the maximum case is the conversion UTF8 -> SJIS JIS X0201 half
- * width kana, where a pair of UTF-8 characters is converted into a single
- * SHIFT_JIS_2004 character (the reverse of the worst case for
- * MAX_CONVERSION_GROWTH).  It needs 6 bytes of input.  In theory, a
- * user-defined conversion function might have more complicated cases, although
- * for the reverse mapping you would probably also need to bump up
- * MAX_CONVERSION_GROWTH.  But there is no need to be stingy here, so make it
- * generous.
- */
-#define MAX_CONVERSION_INPUT_LENGTH	16
-
-/*
- * Maximum byte length of the string equivalent to any one Unicode code point,
- * in any backend encoding.  The current value assumes that a 4-byte UTF-8
- * character might expand by MAX_CONVERSION_GROWTH, which is a huge
- * overestimate.  But in current usage we don't allocate large multiples of
- * this, so there's little point in being stingy.
- */
-#define MAX_UNICODE_EQUIVALENT_STRING	16
-
-/*
- * Table for mapping an encoding number to official encoding name and
- * possibly other subsidiary data.  Be careful to check encoding number
- * before accessing a table entry!
- *
- * if (PG_VALID_ENCODING(encoding))
- *		pg_enc2name_tbl[ encoding ];
- */
-typedef struct pg_enc2name
-{
-	const char *name;
-	pg_enc		encoding;
-#ifdef WIN32
-	unsigned	codepage;		/* codepage for WIN32 */
-#endif
-} pg_enc2name;
-
-extern PGDLLIMPORT const pg_enc2name pg_enc2name_tbl[];
-
-/*
- * Encoding names for gettext
- */
-typedef struct pg_enc2gettext
-{
-	pg_enc		encoding;
-	const char *name;
-} pg_enc2gettext;
-
-extern PGDLLIMPORT const pg_enc2gettext pg_enc2gettext_tbl[];
-
-/*
- * pg_wchar stuff
- */
-typedef int (*mb2wchar_with_len_converter) (const unsigned char *from,
-											pg_wchar *to,
-											int len);
-
-typedef int (*wchar2mb_with_len_converter) (const pg_wchar *from,
-											unsigned char *to,
-											int len);
-
-typedef int (*mblen_converter) (const unsigned char *mbstr);
-
-typedef int (*mbdisplaylen_converter) (const unsigned char *mbstr);
-
-typedef bool (*mbcharacter_incrementer) (unsigned char *mbstr, int len);
-
-typedef int (*mbchar_verifier) (const unsigned char *mbstr, int len);
-
-typedef int (*mbstr_verifier) (const unsigned char *mbstr, int len);
-
-typedef struct
-{
-	mb2wchar_with_len_converter mb2wchar_with_len;	/* convert a multibyte
-													 * string to a wchar */
-	wchar2mb_with_len_converter wchar2mb_with_len;	/* convert a wchar string
-													 * to a multibyte */
-	mblen_converter mblen;		/* get byte length of a char */
-	mbdisplaylen_converter dsplen;	/* get display width of a char */
-	mbchar_verifier mbverifychar;	/* verify multibyte character */
-	mbstr_verifier mbverifystr; /* verify multibyte string */
-	int			maxmblen;		/* max bytes for a char in this encoding */
-} pg_wchar_tbl;
-
-extern PGDLLIMPORT const pg_wchar_tbl pg_wchar_table[];
-
-/*
- * Data structures for conversions between UTF-8 and other encodings
- * (UtfToLocal() and LocalToUtf()).  In these data structures, characters of
- * either encoding are represented by uint32 words; hence we can only support
- * characters up to 4 bytes long.  For example, the byte sequence 0xC2 0x89
- * would be represented by 0x0000C289, and 0xE8 0xA2 0xB4 by 0x00E8A2B4.
- *
- * There are three possible ways a character can be mapped:
- *
- * 1. Using a radix tree, from source to destination code.
- * 2. Using a sorted array of source -> destination code pairs. This
- *	  method is used for "combining" characters. There are so few of
- *	  them that building a radix tree would be wasteful.
- * 3. Using a conversion function.
- */
-
-/*
- * Radix tree for character conversion.
- *
- * Logically, this is actually four different radix trees, for 1-byte,
- * 2-byte, 3-byte and 4-byte inputs. The 1-byte tree is a simple lookup
- * table from source to target code. The 2-byte tree consists of two levels:
- * one lookup table for the first byte, where the value in the lookup table
- * points to a lookup table for the second byte. And so on.
- *
- * Physically, all the trees are stored in one big array, in 'chars16' or
- * 'chars32', depending on the maximum value that needs to be represented. For
- * each level in each tree, we also store lower and upper bound of allowed
- * values - values outside those bounds are considered invalid, and are left
- * out of the tables.
- *
- * In the intermediate levels of the trees, the values stored are offsets
- * into the chars[16|32] array.
- *
- * In the beginning of the chars[16|32] array, there is always a number of
- * zeros, so that you safely follow an index from an intermediate table
- * without explicitly checking for a zero. Following a zero any number of
- * times will always bring you to the dummy, all-zeros table in the
- * beginning. This helps to shave some cycles when looking up values.
- */
-typedef struct
-{
-	/*
-	 * Array containing all the values. Only one of chars16 or chars32 is
-	 * used, depending on how wide the values we need to represent are.
-	 */
-	const uint16 *chars16;
-	const uint32 *chars32;
-
-	/* Radix tree for 1-byte inputs */
-	uint32		b1root;			/* offset of table in the chars[16|32] array */
-	uint8		b1_lower;		/* min allowed value for a single byte input */
-	uint8		b1_upper;		/* max allowed value for a single byte input */
-
-	/* Radix tree for 2-byte inputs */
-	uint32		b2root;			/* offset of 1st byte's table */
-	uint8		b2_1_lower;		/* min/max allowed value for 1st input byte */
-	uint8		b2_1_upper;
-	uint8		b2_2_lower;		/* min/max allowed value for 2nd input byte */
-	uint8		b2_2_upper;
-
-	/* Radix tree for 3-byte inputs */
-	uint32		b3root;			/* offset of 1st byte's table */
-	uint8		b3_1_lower;		/* min/max allowed value for 1st input byte */
-	uint8		b3_1_upper;
-	uint8		b3_2_lower;		/* min/max allowed value for 2nd input byte */
-	uint8		b3_2_upper;
-	uint8		b3_3_lower;		/* min/max allowed value for 3rd input byte */
-	uint8		b3_3_upper;
-
-	/* Radix tree for 4-byte inputs */
-	uint32		b4root;			/* offset of 1st byte's table */
-	uint8		b4_1_lower;		/* min/max allowed value for 1st input byte */
-	uint8		b4_1_upper;
-	uint8		b4_2_lower;		/* min/max allowed value for 2nd input byte */
-	uint8		b4_2_upper;
-	uint8		b4_3_lower;		/* min/max allowed value for 3rd input byte */
-	uint8		b4_3_upper;
-	uint8		b4_4_lower;		/* min/max allowed value for 4th input byte */
-	uint8		b4_4_upper;
-
-} pg_mb_radix_tree;
-
-/*
- * UTF-8 to local code conversion map (for combined characters)
- */
-typedef struct
-{
-	uint32		utf1;			/* UTF-8 code 1 */
-	uint32		utf2;			/* UTF-8 code 2 */
-	uint32		code;			/* local code */
-} pg_utf_to_local_combined;
-
-/*
- * local code to UTF-8 conversion map (for combined characters)
- */
-typedef struct
-{
-	uint32		code;			/* local code */
-	uint32		utf1;			/* UTF-8 code 1 */
-	uint32		utf2;			/* UTF-8 code 2 */
-} pg_local_to_utf_combined;
-
-/*
- * callback function for algorithmic encoding conversions (in either direction)
- *
- * if function returns zero, it does not know how to convert the code
- */
-typedef uint32 (*utf_local_conversion_func) (uint32 code);
-
-/*
- * Support macro for encoding conversion functions to validate their
- * arguments.  (This could be made more compact if we included fmgr.h
- * here, but we don't want to do that because this header file is also
- * used by frontends.)
- */
-#define CHECK_ENCODING_CONVERSION_ARGS(srcencoding,destencoding) \
-	check_encoding_conversion_args(PG_GETARG_INT32(0), \
-								   PG_GETARG_INT32(1), \
-								   PG_GETARG_INT32(4), \
-								   (srcencoding), \
-								   (destencoding))
-
-
-/*
- * Some handy functions for Unicode-specific tests.
- */
-static inline bool
-is_valid_unicode_codepoint(pg_wchar c)
-{
-	return (c > 0 && c <= 0x10FFFF);
-}
-
-static inline bool
-is_utf16_surrogate_first(pg_wchar c)
-{
-	return (c >= 0xD800 && c <= 0xDBFF);
-}
-
-static inline bool
-is_utf16_surrogate_second(pg_wchar c)
-{
-	return (c >= 0xDC00 && c <= 0xDFFF);
-}
-
-static inline pg_wchar
-surrogate_pair_to_codepoint(pg_wchar first, pg_wchar second)
-{
-	return ((first & 0x3FF) << 10) + 0x10000 + (second & 0x3FF);
-}
-
-
-/*
- * These functions are considered part of libpq's exported API and
- * are also declared in libpq-fe.h.
- */
-extern int	pg_char_to_encoding(const char *name);
-extern const char *pg_encoding_to_char(int encoding);
-extern int	pg_valid_server_encoding_id(int encoding);
-
-/*
- * These functions are available to frontend code that links with libpgcommon
- * (in addition to the ones just above).  The constant tables declared
- * earlier in this file are also available from libpgcommon.
- */
-extern int	pg_encoding_mblen(int encoding, const char *mbstr);
-extern int	pg_encoding_mblen_bounded(int encoding, const char *mbstr);
-extern int	pg_encoding_dsplen(int encoding, const char *mbstr);
-extern int	pg_encoding_verifymbchar(int encoding, const char *mbstr, int len);
-extern int	pg_encoding_verifymbstr(int encoding, const char *mbstr, int len);
-extern int	pg_encoding_max_length(int encoding);
-extern int	pg_valid_client_encoding(const char *name);
-extern int	pg_valid_server_encoding(const char *name);
-extern bool is_encoding_supported_by_icu(int encoding);
-extern const char *get_encoding_name_for_icu(int encoding);
-
-extern unsigned char *unicode_to_utf8(pg_wchar c, unsigned char *utf8string);
-extern pg_wchar utf8_to_unicode(const unsigned char *c);
-extern bool pg_utf8_islegal(const unsigned char *source, int length);
-extern int	pg_utf_mblen(const unsigned char *s);
-extern int	pg_mule_mblen(const unsigned char *s);
-
-/*
- * The remaining functions are backend-only.
- */
-extern int	pg_mb2wchar(const char *from, pg_wchar *to);
-extern int	pg_mb2wchar_with_len(const char *from, pg_wchar *to, int len);
-extern int	pg_encoding_mb2wchar_with_len(int encoding,
-										  const char *from, pg_wchar *to, int len);
-extern int	pg_wchar2mb(const pg_wchar *from, char *to);
-extern int	pg_wchar2mb_with_len(const pg_wchar *from, char *to, int len);
-extern int	pg_encoding_wchar2mb_with_len(int encoding,
-										  const pg_wchar *from, char *to, int len);
-extern int	pg_char_and_wchar_strcmp(const char *s1, const pg_wchar *s2);
-extern int	pg_wchar_strncmp(const pg_wchar *s1, const pg_wchar *s2, size_t n);
-extern int	pg_char_and_wchar_strncmp(const char *s1, const pg_wchar *s2, size_t n);
-extern size_t pg_wchar_strlen(const pg_wchar *str);
-extern int	pg_mblen(const char *mbstr);
-extern int	pg_dsplen(const char *mbstr);
-extern int	pg_mbstrlen(const char *mbstr);
-extern int	pg_mbstrlen_with_len(const char *mbstr, int limit);
-extern int	pg_mbcliplen(const char *mbstr, int len, int limit);
-extern int	pg_encoding_mbcliplen(int encoding, const char *mbstr,
-								  int len, int limit);
-extern int	pg_mbcharcliplen(const char *mbstr, int len, int limit);
-extern int	pg_database_encoding_max_length(void);
-extern mbcharacter_incrementer pg_database_encoding_character_incrementer(void);
-
-extern int	PrepareClientEncoding(int encoding);
-extern int	SetClientEncoding(int encoding);
-extern void InitializeClientEncoding(void);
-extern int	pg_get_client_encoding(void);
-extern const char *pg_get_client_encoding_name(void);
-
-extern void SetDatabaseEncoding(int encoding);
-extern int	GetDatabaseEncoding(void);
-extern const char *GetDatabaseEncodingName(void);
-extern void SetMessageEncoding(int encoding);
-extern int	GetMessageEncoding(void);
-
-#ifdef ENABLE_NLS
-extern int	pg_bind_textdomain_codeset(const char *domainname);
-#endif
-
-extern unsigned char *pg_do_encoding_conversion(unsigned char *src, int len,
-												int src_encoding,
-												int dest_encoding);
-extern int	pg_do_encoding_conversion_buf(Oid proc,
-										  int src_encoding,
-										  int dest_encoding,
-										  unsigned char *src, int srclen,
-										  unsigned char *dest, int destlen,
-										  bool noError);
-
-extern char *pg_client_to_server(const char *s, int len);
-extern char *pg_server_to_client(const char *s, int len);
-extern char *pg_any_to_server(const char *s, int len, int encoding);
-extern char *pg_server_to_any(const char *s, int len, int encoding);
-
-extern void pg_unicode_to_server(pg_wchar c, unsigned char *s);
-extern bool pg_unicode_to_server_noerror(pg_wchar c, unsigned char *s);
-
-extern unsigned short BIG5toCNS(unsigned short big5, unsigned char *lc);
-extern unsigned short CNStoBIG5(unsigned short cns, unsigned char lc);
-
-extern int	UtfToLocal(const unsigned char *utf, int len,
-					   unsigned char *iso,
-					   const pg_mb_radix_tree *map,
-					   const pg_utf_to_local_combined *cmap, int cmapsize,
-					   utf_local_conversion_func conv_func,
-					   int encoding, bool noError);
-extern int	LocalToUtf(const unsigned char *iso, int len,
-					   unsigned char *utf,
-					   const pg_mb_radix_tree *map,
-					   const pg_local_to_utf_combined *cmap, int cmapsize,
-					   utf_local_conversion_func conv_func,
-					   int encoding, bool noError);
-
-extern bool pg_verifymbstr(const char *mbstr, int len, bool noError);
-extern bool pg_verify_mbstr(int encoding, const char *mbstr, int len,
-							bool noError);
-extern int	pg_verify_mbstr_len(int encoding, const char *mbstr, int len,
-								bool noError);
-
-extern void check_encoding_conversion_args(int src_encoding,
-										   int dest_encoding,
-										   int len,
-										   int expected_src_encoding,
-										   int expected_dest_encoding);
-
-extern void report_invalid_encoding(int encoding, const char *mbstr, int len) pg_attribute_noreturn();
-extern void report_untranslatable_char(int src_encoding, int dest_encoding,
-									   const char *mbstr, int len) pg_attribute_noreturn();
-
-extern int	local2local(const unsigned char *l, unsigned char *p, int len,
-						int src_encoding, int dest_encoding,
-						const unsigned char *tab, bool noError);
-extern int	latin2mic(const unsigned char *l, unsigned char *p, int len,
-					  int lc, int encoding, bool noError);
-extern int	mic2latin(const unsigned char *mic, unsigned char *p, int len,
-					  int lc, int encoding, bool noError);
-extern int	latin2mic_with_table(const unsigned char *l, unsigned char *p,
-								 int len, int lc, int encoding,
-								 const unsigned char *tab, bool noError);
-extern int	mic2latin_with_table(const unsigned char *mic, unsigned char *p,
-								 int len, int lc, int encoding,
-								 const unsigned char *tab, bool noError);
-
-#ifdef WIN32
-extern WCHAR *pgwin32_message_to_UTF16(const char *str, int len, int *utf16len);
-#endif
-
-
-/*
- * Verify a chunk of bytes for valid ASCII.
- *
- * Returns false if the input contains any zero bytes or bytes with the
- * high-bit set. Input len must be a multiple of the chunk size (8 or 16).
- */
-static inline bool
-is_valid_ascii(const unsigned char *s, int len)
-{
-	const unsigned char *const s_end = s + len;
-	Vector8		chunk;
-	Vector8		highbit_cum = vector8_broadcast(0);
-#ifdef USE_NO_SIMD
-	Vector8		zero_cum = vector8_broadcast(0x80);
-#endif
-
-	Assert(len % sizeof(chunk) == 0);
-
-	while (s < s_end)
-	{
-		vector8_load(&chunk, s);
-
-		/* Capture any zero bytes in this chunk. */
-#ifdef USE_NO_SIMD
-
-		/*
-		 * First, add 0x7f to each byte. This sets the high bit in each byte,
-		 * unless it was a zero. If any resulting high bits are zero, the
-		 * corresponding high bits in the zero accumulator will be cleared.
-		 *
-		 * If none of the bytes in the chunk had the high bit set, the max
-		 * value each byte can have after the addition is 0x7f + 0x7f = 0xfe,
-		 * and we don't need to worry about carrying over to the next byte. If
-		 * any input bytes did have the high bit set, it doesn't matter
-		 * because we check for those separately.
-		 */
-		zero_cum &= (chunk + vector8_broadcast(0x7F));
-#else
-
-		/*
-		 * Set all bits in each lane of the highbit accumulator where input
-		 * bytes are zero.
-		 */
-		highbit_cum = vector8_or(highbit_cum,
-								 vector8_eq(chunk, vector8_broadcast(0)));
-#endif
-
-		/* Capture all set bits in this chunk. */
-		highbit_cum = vector8_or(highbit_cum, chunk);
-
-		s += sizeof(chunk);
-	}
-
-	/* Check if any high bits in the high bit accumulator got set. */
-	if (vector8_is_highbit_set(highbit_cum))
-		return false;
-
-#ifdef USE_NO_SIMD
-	/* Check if any high bits in the zero accumulator got cleared. */
-	if (zero_cum != vector8_broadcast(0x80))
-		return false;
-#endif
-
-	return true;
-}
-
-#endif							/* PG_WCHAR_H */