openstudio-standards 0.4.0 → 0.5.0.rc1

data/lib/openstudio-standards/standards/Standards.PlanarSurface.rb

@@ -201,8 +201,8 @@ class Standard
 
   # Get appropriate construction object based on type of surface or subsurface
   # @author: Doug Maddox, PNNL
-  # @param: surface_category [string] type of surface: this is not an OpenStudio string
-  # @param: surface_type [string] SubSurfaceType: this is an OpenStudio string
+  # @param: surface_category [String type of surface: this is not an OpenStudio string
+  # @param: surface_type [String SubSurfaceType: this is an OpenStudio string
   # @param: cons_set [object] DefaultSubSurfaceConstructions object
   # @return: [object] Construction object
   def get_default_surface_cons_from_surface_type(surface_category, surface_type, cons_set)

data/lib/openstudio-standards/standards/Standards.PlantLoop.rb

@@ -5,7 +5,7 @@ class Standard
   #
   # @param plant_loop [OpenStudio::Model::PlantLoop] plant loop
   # @param climate_zone [String] ASHRAE climate zone, e.g. 'ASHRAE 169-2013-4A'
-  # @return [Bool] returns true if successful, false if not
+  # @return [Boolean] returns true if successful, false if not
   def plant_loop_apply_standard_controls(plant_loop, climate_zone)
     # Supply water temperature reset
     # plant_loop_enable_supply_water_temperature_reset(plant_loop) if plant_loop_supply_water_temperature_reset_required?(plant_loop)
@@ -17,7 +17,7 @@ class Standard
   # @param chilled_water_loop [OpenStudio::Model::PlantLoop] chilled water loop
   # @param dsgn_sup_wtr_temp [Double] design chilled water supply T
   # @param dsgn_sup_wtr_temp_delt [Double] design chilled water supply delta T
-  # @return [Bool] returns true if successful, false if not
+  # @return [Boolean] returns true if successful, false if not
   def chw_sizing_control(model, chilled_water_loop, dsgn_sup_wtr_temp, dsgn_sup_wtr_temp_delt)
     # chilled water loop sizing and controls
     if dsgn_sup_wtr_temp.nil?
@@ -62,7 +62,7 @@ class Standard
   # Returns true if primary and/or secondary pumps are variable speed.
   #
   # @param plant_loop [OpenStudio::Model::PlantLoop] plant loop
-  # @return [Bool] returns true if variable flow, false if not
+  # @return [Boolean] returns true if variable flow, false if not
   def plant_loop_variable_flow_system?(plant_loop)
     variable_flow = false
 
@@ -89,7 +89,7 @@ class Standard
   #   you could set at 0.9 and just calculate the pressure rise to have your 19 W/GPM or whatever
   #
   # @param plant_loop [OpenStudio::Model::PlantLoop] plant loop
-  # @return [Bool] returns true if successful, false if not
+  # @return [Boolean] returns true if successful, false if not
   def plant_loop_apply_prm_baseline_pump_power(plant_loop)
     # Determine the pumping power per
     # flow based on loop type.
@@ -104,7 +104,7 @@ class Standard
 
         has_district_heating = false
         plant_loop.supplyComponents.each do |sc|
-          if sc.to_DistrictHeating.is_initialized
+          if sc.iddObjectType.valueName.to_s.include?('DistrictHeating')
             has_district_heating = true
           end
         end
@@ -187,7 +187,7 @@ class Standard
   # Applies the temperatures to the plant loop based on Appendix G.
   #
   # @param plant_loop [OpenStudio::Model::PlantLoop] plant loop
-  # @return [Bool] returns true if successful, false if not
+  # @return [Boolean] returns true if successful, false if not
   def plant_loop_apply_prm_baseline_temperatures(plant_loop)
     sizing_plant = plant_loop.sizingPlant
     loop_type = sizing_plant.loopType
@@ -206,7 +206,7 @@ class Standard
   # Applies the hot water temperatures to the plant loop based on Appendix G.
   #
   # @param plant_loop [OpenStudio::Model::PlantLoop] plant loop
-  # @return [Bool] returns true if successful, false if not
+  # @return [Boolean] returns true if successful, false if not
   def plant_loop_apply_prm_baseline_hot_water_temperatures(plant_loop)
     sizing_plant = plant_loop.sizingPlant
 
@@ -243,7 +243,7 @@ class Standard
   # Applies the chilled water temperatures to the plant loop based on Appendix G.
   #
   # @param plant_loop [OpenStudio::Model::PlantLoop] plant loop
-  # @return [Bool] returns true if successful, false if not
+  # @return [Boolean] returns true if successful, false if not
   def plant_loop_apply_prm_baseline_chilled_water_temperatures(plant_loop)
     sizing_plant = plant_loop.sizingPlant
 
@@ -286,7 +286,7 @@ class Standard
   # Applies the condenser water temperatures to the plant loop based on Appendix G.
   #
   # @param plant_loop [OpenStudio::Model::PlantLoop] plant loop
-  # @return [Bool] returns true if successful, false if not
+  # @return [Boolean] returns true if successful, false if not
   def plant_loop_apply_prm_baseline_condenser_water_temperatures(plant_loop)
     sizing_plant = plant_loop.sizingPlant
     loop_type = sizing_plant.loopType
@@ -447,7 +447,7 @@ class Standard
   # Required if heating or cooling capacity is greater than 300,000 Btu/hr.
   #
   # @param plant_loop [OpenStudio::Model::PlantLoop] plant loop
-  # @return [Bool] returns true if required, false if not
+  # @return [Boolean] returns true if required, false if not
   def plant_loop_supply_water_temperature_reset_required?(plant_loop)
     reset_required = false
 
@@ -488,7 +488,7 @@ class Standard
   # Enable reset of hot or chilled water temperature based on outdoor air temperature.
   #
   # @param plant_loop [OpenStudio::Model::PlantLoop] plant loop
-  # @return [Bool] returns true if successful, false if not
+  # @return [Boolean] returns true if successful, false if not
   def plant_loop_enable_supply_water_temperature_reset(plant_loop)
     # Get the current setpoint manager on the outlet node
     # and determine if already has temperature reset
@@ -593,7 +593,7 @@ class Standard
         else
           OpenStudio.logFree(OpenStudio::Warn, 'openstudio.standards.PlantLoop', "For #{plant_loop.name} capacity of #{chiller.name} is not available, total cooling capacity of plant loop will be incorrect when applying standard.")
         end
-        # DistrictCooling
+      # DistrictCooling
       elsif sc.to_DistrictCooling.is_initialized
         dist_clg = sc.to_DistrictCooling.get
         if dist_clg.nominalCapacity.is_initialized
@@ -623,8 +623,8 @@ class Standard
     # on the plant loop.
     total_heating_capacity_w = 0
     plant_loop.supplyComponents.each do |sc|
-      # BoilerHotWater
       if sc.to_BoilerHotWater.is_initialized
+        # BoilerHotWater
         boiler = sc.to_BoilerHotWater.get
         if boiler.nominalCapacity.is_initialized
           total_heating_capacity_w += boiler.nominalCapacity.get
@@ -633,8 +633,8 @@ class Standard
         else
           OpenStudio.logFree(OpenStudio::Warn, 'openstudio.standards.PlantLoop', "For #{plant_loop.name} capacity of Boiler:HotWater ' #{boiler.name} is not available, total heating capacity of plant loop will be incorrect when applying standard.")
         end
-        # WaterHeater:Mixed
       elsif sc.to_WaterHeaterMixed.is_initialized
+        # WaterHeater:Mixed
         water_heater = sc.to_WaterHeaterMixed.get
         if water_heater.heaterMaximumCapacity.is_initialized
           total_heating_capacity_w += water_heater.heaterMaximumCapacity.get
@@ -643,8 +643,8 @@ class Standard
         else
           OpenStudio.logFree(OpenStudio::Warn, 'openstudio.standards.PlantLoop', "For #{plant_loop.name} capacity of WaterHeater:Mixed #{water_heater.name} is not available, total heating capacity of plant loop will be incorrect when applying standard.")
         end
-        # WaterHeater:Stratified
       elsif sc.to_WaterHeaterStratified.is_initialized
+        # WaterHeater:Stratified
         water_heater = sc.to_WaterHeaterStratified.get
         if water_heater.heater1Capacity.is_initialized
           total_heating_capacity_w += water_heater.heater1Capacity.get
@@ -652,9 +652,16 @@ class Standard
         if water_heater.heater2Capacity.is_initialized
           total_heating_capacity_w += water_heater.heater2Capacity.get
         end
+      elsif sc.iddObjectType.valueName.to_s.include?('DistrictHeating')
         # DistrictHeating
-      elsif sc.to_DistrictHeating.is_initialized
-        dist_htg = sc.to_DistrictHeating.get
+        case sc.iddObjectType.valueName.to_s
+        when 'OS_DistrictHeating'
+          dist_htg = sc.to_DistrictHeating.get
+        when 'OS_DistrictHeatingWater'
+          dist_htg = sc.to_DistrictHeatingWater.get
+        when 'OS_DistrictHeatingSteam'
+          dist_htg = sc.to_DistrictHeatingSteam.get
+        end
         if dist_htg.nominalCapacity.is_initialized
           total_heating_capacity_w += dist_htg.nominalCapacity.get
         elsif dist_htg.autosizedNominalCapacity.is_initialized
@@ -743,7 +750,7 @@ class Standard
   # Applies the pumping controls to the loop based on Appendix G.
   #
   # @param plant_loop [OpenStudio::Model::PlantLoop] plant loop
-  # @return [Bool] returns true if successful, false if not
+  # @return [Boolean] returns true if successful, false if not
   def plant_loop_apply_prm_baseline_pumping_type(plant_loop)
     sizing_plant = plant_loop.sizingPlant
     loop_type = sizing_plant.loopType
@@ -763,7 +770,7 @@ class Standard
   # Applies the chilled water pumping controls to the loop based on Appendix G.
   #
   # @param plant_loop [OpenStudio::Model::PlantLoop] chilled water loop
-  # @return [Bool] returns true if successful, false if not
+  # @return [Boolean] returns true if successful, false if not
   def plant_loop_apply_prm_baseline_chilled_water_pumping_type(plant_loop)
     # Determine the pumping type.
     minimum_cap_tons = 300.0
@@ -835,7 +842,7 @@ class Standard
   # Applies the hot water pumping controls to the loop based on Appendix G.
   #
   # @param plant_loop [OpenStudio::Model::PlantLoop] hot water loop
-  # @return [Bool] returns true if successful, false if not
+  # @return [Boolean] returns true if successful, false if not
   def plant_loop_apply_prm_baseline_hot_water_pumping_type(plant_loop)
     # Determine the minimum area to determine
     # pumping type.
@@ -870,7 +877,7 @@ class Standard
   # Applies the condenser water pumping controls to the loop based on Appendix G.
   #
   # @param plant_loop [OpenStudio::Model::PlantLoop] condenser water loop
-  # @return [Bool] returns true if successful, false if not
+  # @return [Boolean] returns true if successful, false if not
   def plant_loop_apply_prm_baseline_condenser_water_pumping_type(plant_loop)
     # All condenser water loops are constant flow
     control_type = 'Constant Flow'
@@ -898,7 +905,7 @@ class Standard
   # into multiple separate boilers based on Appendix G.
   #
   # @param plant_loop [OpenStudio::Model::PlantLoop] hot water loop
-  # @return [Bool] returns true if successful, false if not
+  # @return [Boolean] returns true if successful, false if not
   def plant_loop_apply_prm_number_of_boilers(plant_loop)
     # Skip non-heating plants
     return true unless plant_loop.sizingPlant.loopType == 'Heating'
@@ -961,8 +968,9 @@ class Standard
   # Splits the single chiller used for the initial sizing run
   # into multiple separate chillers based on Appendix G.
   #
-  # @param plant_loop_args [Array] chilled water loop (OpenStudio::Model::PlantLoop), sizing run directory
-  # @return [Bool] returns true if successful, false if not
+  # @param plant_loop [OpenStudio::Model::PlantLoop] chilled water loop
+  # @param sizing_run_dir [String] sizing run directory
+  # @return [Boolean] returns true if successful, false if not
   def plant_loop_apply_prm_number_of_chillers(plant_loop, sizing_run_dir = nil)
     # Skip non-cooling plants
     return true unless plant_loop.sizingPlant.loopType == 'Cooling'
@@ -1110,7 +1118,7 @@ class Standard
   # into multiple separate cooling towers based on Appendix G.
   #
   # @param plant_loop [OpenStudio::Model::PlantLoop] condenser water loop
-  # @return [Bool] returns true if successful, false if not
+  # @return [Boolean] returns true if successful, false if not
   def plant_loop_apply_prm_number_of_cooling_towers(plant_loop)
     # Skip non-cooling plants
     return true unless plant_loop.sizingPlant.loopType == 'Condenser'
@@ -1372,7 +1380,7 @@ class Standard
       obj_type = component.iddObjectType.valueName.to_s
 
       case obj_type
-        when 'OS_DistrictHeating'
+        when 'OS_DistrictHeating', 'OS_DistrictHeatingWater', 'OS_DistrictHeatingSteam'
           primary_fuels << 'DistrictHeating'
           combination_system = false
         when 'OS_HeatPump_WaterToWater_EquationFit_Heating'
@@ -1398,7 +1406,13 @@ class Standard
           # Check the plant loop connection on the source side
           if component.secondaryPlantLoop.is_initialized
             source_plant_loop = component.secondaryPlantLoop.get
-            secondary_fuels += plant_loop.model.plant_loop_heating_fuels(source_plant_loop)
+
+            # error if Loop heating fuels method is not available
+            if component.model.version < OpenStudio::VersionString.new('3.6.0')
+              OpenStudio.logFree(OpenStudio::Error, 'openstudio.Standards.PlantLoop', 'Required Loop method .heatingFuelTypes is not available in pre-OpenStudio 3.6.0 versions. Use a more recent version of OpenStudio.')
+            end
+
+            secondary_fuels += source_plant_loop.heatingFuelTypes.map(&:valueName)
             secondary_heating_capacity += plant_loop_total_heating_capacity(source_plant_loop)
           end
 
@@ -1421,7 +1435,13 @@ class Standard
           # Check the plant loop connection on the source side
           if component.secondaryPlantLoop.is_initialized
             source_plant_loop = component.secondaryPlantLoop.get
-            secondary_fuels += plant_loop.model.plant_loop_heating_fuels(source_plant_loop)
+
+            # error if Loop heating fuels method is not available
+            if component.model.version < OpenStudio::VersionString.new('3.6.0')
+              OpenStudio.logFree(OpenStudio::Error, 'openstudio.Standards.PlantLoop', 'Required Loop method .heatingFuelTypes is not available in pre-OpenStudio 3.6.0 versions. Use a more recent version of OpenStudio.')
+            end
+
+            secondary_fuels += source_plant_loop.heatingFuelTypes.map(&:valueName)
             secondary_heating_capacity += plant_loop_total_heating_capacity(source_plant_loop)
           end
 
@@ -1436,7 +1456,13 @@ class Standard
           cooling_hx_control_types.each(&:downcase!)
           if !cooling_hx_control_types.include?(hx.controlType.downcase) && hx.secondaryPlantLoop.is_initialized
             source_plant_loop = hx.secondaryPlantLoop.get
-            secondary_fuels += plant_loop.model.plant_loop_heating_fuels(source_plant_loop)
+
+            # error if Loop heating fuels method is not available
+            if component.model.version < OpenStudio::VersionString.new('3.6.0')
+              OpenStudio.logFree(OpenStudio::Error, 'openstudio.Standards.PlantLoop', 'Required Loop method .heatingFuelTypes is not available in pre-OpenStudio 3.6.0 versions. Use a more recent version of OpenStudio.')
+            end
+
+            secondary_fuels += source_plant_loop.heatingFuelTypes.map(&:valueName)
             secondary_heating_capacity += plant_loop_total_heating_capacity(source_plant_loop)
           end
 
@@ -1476,4 +1502,43 @@ class Standard
     plantloop_capacity = plantloop_dt * plantloop_maxflowrate * 1000.0 * 4180.0
     return plantloop_capacity
   end
+
+  # This methods replaces all indoor or outdoor pipes which model the heat transfer between the pipe and the
+  # environement by adiabatic pipes.
+  #
+  # @param plant_loop [OpenStudio::Model::PlantLoop] plant loop
+  # @return [Boolean] returns true if successful
+  def plant_loop_adiabatic_pipes_only(plant_loop)
+    supply_side_components = plant_loop.supplyComponents
+    demand_side_components = plant_loop.demandComponents
+    plant_loop_components = supply_side_components += demand_side_components
+    plant_loop_components.each do |component|
+      # Get the object type
+      obj_type = component.iddObjectType.valueName.to_s
+      next unless ['OS_Pipe_Indoor', 'OS_Pipe_Outdoor'].include?(obj_type)
+
+      # Get pipe object
+      pipe = nil
+      case obj_type
+      when 'OS_Pipe_Indoor'
+        pipe = component.to_PipeIndoor.get
+      when 'OS_Pipe_Outdoor'
+        pipe = component.to_PipeOutdoor.get
+      end
+
+      # Get pipe node
+      node = prm_get_optional_handler(pipe, @sizing_run_dir, 'to_StraightComponent', 'outletModelObject', 'to_Node')
+
+      # Get pipe and node names
+      node_name = node.name.get
+      pipe_name = pipe.name.get
+
+      # Replace indoor or outdoor pipe by an adiabatic pipe
+      new_pipe = OpenStudio::Model::PipeAdiabatic.new(plant_loop.model)
+      new_pipe.setName(pipe_name)
+      new_pipe.addToNode(node)
+      component.remove
+    end
+    return true
+  end
 end

data/lib/openstudio-standards/standards/Standards.Pump.rb

@@ -9,7 +9,7 @@ module Pump
   # @param pump [OpenStudio::Model::StraightComponent] pump object, allowable types:
   #   PumpConstantSpeed, PumpVariableSpeed
   # @param target_w_per_gpm [Double] the target power per flow, in W/gpm
-  # @return [Bool] returns true if successful, false if not
+  # @return [Boolean] returns true if successful, false if not
   # @author jmarrec
   def pump_apply_prm_pressure_rise_and_motor_efficiency(pump, target_w_per_gpm)
     # Eplus assumes an impeller efficiency of 0.78 to determine the total efficiency
@@ -94,7 +94,7 @@ module Pump
   #
   # @param pump [OpenStudio::Model::StraightComponent] pump object, allowable types:
   #   PumpConstantSpeed, PumpVariableSpeed
-  # @return [Bool] returns true if successful, false if not
+  # @return [Boolean] returns true if successful, false if not
   def pump_apply_standard_minimum_motor_efficiency(pump)
     # Get the horsepower
     bhp = pump_brake_horsepower(pump)

data/lib/openstudio-standards/standards/Standards.ScheduleConstant.rb

@@ -33,8 +33,8 @@ end
 # Intended use is for storing fan schedules to hash of ZoneName:SchedArray so schedules
 # can be saved when HVAC objects are deleted
 # @author Doug Maddox, PNNL
-# @param [object] model
-# @param [Object] schedule_ruleset
+# @param model [OpenStudio::Model::Model] OpenStudio model object
+# @param schedule_constant [OpenStudio::Model::ScheduleConstant] schedule
 # @return [Array<Double>] Array of sequential hourly values for year + 24 hours at end for holiday
 def get_8760_values_from_schedule_constant(model, schedule_constant)
   yd = model.getYearDescription

data/lib/openstudio-standards/standards/Standards.ScheduleRuleset.rb

@@ -394,13 +394,13 @@ class Standard
       end
 
       # get values for new default profile
-      new_default_daySchedule = rule_vector[new_default_index].daySchedule
-      new_default_daySchedule_values = new_default_daySchedule.values
-      new_default_daySchedule_times = new_default_daySchedule.times
+      new_default_day_schedule = rule_vector[new_default_index].daySchedule
+      new_default_day_schedule_values = new_default_day_schedule.values
+      new_default_day_schedule_times = new_default_day_schedule.times
 
       # update values and times for default profile
-      for i in 0..(new_default_daySchedule_values.size - 1)
-        old_default_schedule_day.addValue(new_default_daySchedule_times[i], new_default_daySchedule_values[i])
+      for i in 0..(new_default_day_schedule_values.size - 1)
+        old_default_schedule_day.addValue(new_default_day_schedule_times[i], new_default_day_schedule_values[i])
       end
 
       # remove rule object that has become the default. Also try to remove the ScheduleDay
@@ -415,8 +415,8 @@ class Standard
   # @author David Goldwasser
   # @param schedule [OpenStudio::Model::ScheduleRuleset] schedule ruleset object
   # @param ramp_frequency [Double] ramp frequency in minutes
-  # @param infer_hoo_for_non_assigned_objects [Bool] attempt to get hoo for objects like swh with and exterior lighting
-  # @param error_on_out_of_order [Bool] true will error if applying formula creates out of order values
+  # @param infer_hoo_for_non_assigned_objects [Boolean] attempt to get hoo for objects like swh with and exterior lighting
+  # @param error_on_out_of_order [Boolean] true will error if applying formula creates out of order values
   # @return [OpenStudio::Model::ScheduleRuleset] schedule ruleset object
   def schedule_apply_parametric_inputs(schedule, ramp_frequency, infer_hoo_for_non_assigned_objects, error_on_out_of_order, parametric_inputs = nil)
     # Check if parametric inputs were supplied and generate them if not
@@ -611,7 +611,7 @@ class Standard
   # @param sat_end_time [OpenStudio::Time] Saturday end time.  If greater than 24:00, hours of operation will wrap over midnight.
   # @param sun_start_time [OpenStudio::Time] Sunday start time.  If nil, no change will be made to this day.
   # @param sun_end_time [OpenStudio::Time] Sunday end time.  If greater than 24:00, hours of operation will wrap over midnight.
-  # @return [Bool] returns true if successful, false if not
+  # @return [Boolean] returns true if successful, false if not
   def schedule_ruleset_set_hours_of_operation(schedule_ruleset, wkdy_start_time: nil, wkdy_end_time: nil, sat_start_time: nil, sat_end_time: nil, sun_start_time: nil, sun_end_time: nil)
     # Default day is assumed to represent weekdays
     if wkdy_start_time && wkdy_end_time
@@ -645,9 +645,9 @@ class Standard
   #
   # Return Array of weekday values from Array of all day values
   # @author Xuechen (Jerry) Lei, PNNL
-  # @param model [OpenStudio::model::Model] OpenStudio model object
+  # @param model [OpenStudio::Model::Model] OpenStudio model object
   # @param values [Array] hourly time-series values of all days
-  # @param value_includes_holiday [Bool] whether the input values include a day of holiday at the end of the array
+  # @param value_includes_holiday [Boolean] whether the input values include a day of holiday at the end of the array
   #
   # @return [Array] hourly time-series values in weekdays
   #
@@ -721,7 +721,7 @@ class Standard
       day_schedule_holiday = schedule_ruleset.to_ScheduleRuleset.get.defaultDaySchedule
     end
     # Currently holidaySchedule is not working in SDK in ScheduleRuleset object
-    # TODO: enable the following lines when holidaySchedule is available
+    # @todo enable the following lines when holidaySchedule is available
     # if !schedule_ruleset.isHolidayScheduleDefaulted
     #   day_schedule = schedule_ruleset.to_ScheduleRuleset.get.holidaySchedule
     # else
@@ -974,7 +974,7 @@ class Standard
       end
 
       # Last day in values array is the holiday schedule
-      # TODO: add holiday schedule when implemented in OpenStudio SDK
+      # @todo add holiday schedule when implemented in OpenStudio SDK
     end
 
     # Need to handle design days
@@ -1186,8 +1186,8 @@ class Standard
   # @param val_flr [Double] value floor
   # @param val_clg [Double] value ceiling
   # @param ramp_frequency [Double] ramp frequency in minutes
-  # @param infer_hoo_for_non_assigned_objects [Bool] attempt to get hoo for objects like swh with and exterior lighting
-  # @param error_on_out_of_order [Bool] true will error if applying formula creates out of order values
+  # @param infer_hoo_for_non_assigned_objects [Boolean] attempt to get hoo for objects like swh with and exterior lighting
+  # @param error_on_out_of_order [Boolean] true will error if applying formula creates out of order values
   # @return [OpenStudio::Model::ScheduleDay] schedule day
   # @api private
   def process_hrs_of_operation_hash(sch_day, hoo_start, hoo_end, val_flr, val_clg, ramp_frequency, infer_hoo_for_non_assigned_objects, error_on_out_of_order)

data/lib/openstudio-standards/standards/Standards.Space.rb

@@ -8,7 +8,7 @@ class Standard
   #   situations.  When it fails, it will log warnings/errors for users to see.
   #
   # @param space [OpenStudio::Model::Space] space object
-  # @param draw_daylight_areas_for_debugging [Bool] If this argument is set to true,
+  # @param draw_daylight_areas_for_debugging [Boolean] If this argument is set to true,
   #   daylight areas will be added to the model as surfaces for visual debugging.
   #   Yellow = toplighted area, Red = primary sidelighted area,
   #   Blue = secondary sidelighted area, Light Blue = floor
@@ -804,9 +804,9 @@ class Standard
 
   # Default for 2013 and earlier is to Add daylighting controls (sidelighting and toplighting) per the template
   # @param space [OpenStudio::Model::Space] the space with daylighting
-  # @param remove_existing_controls [Bool] if true, will remove existing controls then add new ones
-  # @param draw_daylight_areas_for_debugging [Bool] If this argument is set to true,
-  # @return [boolean] true if successful
+  # @param remove_existing [Boolean] if true, will remove existing controls then add new ones
+  # @param draw_areas_for_debug [Boolean] If this argument is set to true,
+  # @return [Boolean] returns true if successful, false if not
   def space_set_baseline_daylighting_controls(space, remove_existing = false, draw_areas_for_debug = false)
     added = space_add_daylighting_controls(space, remove_existing, draw_areas_for_debug)
     return added
@@ -818,12 +818,12 @@ class Standard
   #   situations.  When it fails, it will log warnings/errors for users to see.
   #
   # @param space [OpenStudio::Model::Space] the space with daylighting
-  # @param remove_existing_controls [Bool] if true, will remove existing controls then add new ones
-  # @param draw_daylight_areas_for_debugging [Bool] If this argument is set to true,
+  # @param remove_existing_controls [Boolean] if true, will remove existing controls then add new ones
+  # @param draw_daylight_areas_for_debugging [Boolean] If this argument is set to true,
   #   daylight areas will be added to the model as surfaces for visual debugging.
   #   Yellow = toplighted area, Red = primary sidelighted area,
   #   Blue = secondary sidelighted area, Light Blue = floor
-  # @return [boolean] true if successful
+  # @return [Boolean] returns true if successful, false if not
   # @todo add a list of valid choices for template argument
   # @todo add exception for retail spaces
   # @todo add exception 2 for skylights with VT < 0.4
@@ -1223,9 +1223,9 @@ class Standard
   # @param areas [Hash] a hash of daylighted areas
   # @param sorted_windows [Hash] a hash of windows, sorted by priority
   # @param sorted_skylights [Hash] a hash of skylights, sorted by priority
-  # @param req_top_ctrl [Bool] if toplighting controls are required
-  # @param req_pri_ctrl [Bool] if primary sidelighting controls are required
-  # @param req_sec_ctrl [Bool] if secondary sidelighting controls are required
+  # @param req_top_ctrl [Boolean] if toplighting controls are required
+  # @param req_pri_ctrl [Boolean] if primary sidelighting controls are required
+  # @param req_sec_ctrl [Boolean] if secondary sidelighting controls are required
   # @return [Array] array of 4 items
   #   [sensor 1 fraction, sensor 2 fraction, sensor 1 window, sensor 2 window]
   def space_daylighting_fractions_and_windows(space,
@@ -1342,7 +1342,7 @@ class Standard
   #
   # @param space [OpenStudio::Model::Space] space object
   # @return [Double] the baseline infiltration rate, in cfm/ft^2 exterior above grade wall area at 75 Pa
-  def space_infiltration_rate_75_pa(space)
+  def space_infiltration_rate_75_pa(space = nil)
     basic_infil_rate_cfm_per_ft2 = 1.8
     return basic_infil_rate_cfm_per_ft2
   end
@@ -1454,7 +1454,7 @@ class Standard
 
       # Conditioned space OR semi-heated space <-> unconditioned spaces
       unless surf_cnt
-        # TODO: add a case for 'Zone' when supported
+        # @todo add a case for 'Zone' when supported
         if surface.outsideBoundaryCondition == 'Surface'
           adj_space = surface.adjacentSurface.get.space.get
           adj_space_cond_type = space_conditioning_category(adj_space)
@@ -1481,7 +1481,7 @@ class Standard
   # or if the space type name contains the word plenum.
   #
   # @param space [OpenStudio::Model::Space] space object
-  # return [Bool] returns true if plenum, false if not
+  # return [Boolean] returns true if plenum, false if not
   def space_plenum?(space)
     plenum_status = false
 
@@ -1523,7 +1523,7 @@ class Standard
   # type of the space below the largest floor in the plenum.
   #
   # @param space [OpenStudio::Model::Space] space object
-  # return [Bool] true if residential, false if nonresidential
+  # return [Boolean] true if residential, false if nonresidential
   def space_residential?(space)
     is_res = false
 
@@ -1596,7 +1596,6 @@ class Standard
   # Determines whether the space is conditioned per 90.1, which is based on heating and cooling loads.
   #
   # @param space [OpenStudio::Model::Space] space object
-  # @param climate_zone [String] ASHRAE climate zone, e.g. 'ASHRAE 169-2013-4A'
   # @return [String] NonResConditioned, ResConditioned, Semiheated, Unconditioned
   # @todo add logic to detect indirectly-conditioned spaces based on air transfer
   def space_conditioning_category(space)
@@ -1717,7 +1716,7 @@ class Standard
   #
   # @author Andrew Parker, Julien Marrec
   # @param space [OpenStudio::Model::Space] space object
-  # @return [Bool] returns true if heated, false if not
+  # @return [Boolean] returns true if heated, false if not
   def space_heated?(space)
     # Get the zone this space is inside
     zone = space.thermalZone
@@ -1738,7 +1737,7 @@ class Standard
   #
   # @author Andrew Parker, Julien Marrec
   # @param space [OpenStudio::Model::Space] space object
-  # @return [Bool] returns true if cooled, false if not
+  # @return [Boolean] returns true if cooled, false if not
   def space_cooled?(space)
     # Get the zone this space is inside
     zone = space.thermalZone
@@ -1854,7 +1853,7 @@ class Standard
   # and fraction lost for equipment
   # @author Doug Maddox, PNNL
   # @param space object
-  # @param return_noncoincident_value [boolean] if true, return value is noncoincident peak; if false, return is array off coincident load
+  # @param return_noncoincident_value [Boolean] if true, return value is noncoincident peak; if false, return is array off coincident load
   # @return [Double] 8760 array of the design internal load, in W, for this space
   def space_internal_load_annual_array(model, space, return_noncoincident_value)
     # For each type of load, first convert schedules to 8760 arrays so coincident load can be determined
@@ -2070,13 +2069,13 @@ class Standard
   # to determine whether specific zones should be isolated to PSZ based on
   # space loads that differ significantly from other zones on the multizone system
   #
-  # @param model [OpenStudio::Model::Model] the model
+  # @param model [OpenStudio::Model::Model] OpenStudio model object
   # @param space [OpenStudio::Model::Space] the space
   # @param equips [object] This is an array of equipment objects in the model
   # @param eqp_type [String] string description of the type of equipment object
   # @param ppl_total [Numeric] total number of people in the space
   # @param load_values [Array] 8760 array of load values for the equipment type
-  # @param return_noncoincident_value [boolean] return a single peak value if true; return 8760 gain profile if false
+  # @param return_noncoincident_value [Boolean] return a single peak value if true; return 8760 gain profile if false
   #
   # @return [Array] load values array; if return_noncoincident_value is true, array has only one value
   #
@@ -2108,13 +2107,13 @@ class Standard
   # to determine whether specific zones should be isolated to PSZ based on
   # space loads that differ significantly from other zones on the multizone system
   #
-  # @param model [OpenStudio::Model::Model] the model
+  # @param model [OpenStudio::Model::Model] OpenStudio model object
   # @param space [OpenStudio::Model::Space] the space
   # @param equip [object] This can be any type of equipment object in the space
   # @param eqp_type [String] string description of the type of equipment object
   # @param ppl_total [Numeric] total number of people in the space
   # @param load_values [Array] 8760 array of load values for the equipment type
-  # @param return_noncoincident_value [boolean] return a single peak value if true; return 8760 gain profile if false
+  # @param return_noncoincident_value [Boolean] return a single peak value if true; return 8760 gain profile if false
   #
   # @return [Array] load values array; if return_noncoincident_value is true, array has only one value
   #
@@ -2216,7 +2215,7 @@ class Standard
   # will return a sorted array of array of spaces and connected area (Descending)
   #
   # @param space [OpenStudio::Model::Space] space object
-  # @param same_floor [Bool] only consider spaces on the same floor
+  # @param same_floor [Boolean] only consider spaces on the same floor
   # @return [Hash] sorted hash with array of spaces and area
   def space_get_adjacent_spaces_with_shared_wall_areas(space, same_floor = true)
     same_floor_spaces = []
@@ -2281,7 +2280,7 @@ class Standard
   # Find the space that has the most wall area touching this space.
   #
   # @param space [OpenStudio::Model::Space] space object
-  # @param same_floor [Bool] only consider spaces on the same floor
+  # @param same_floor [Boolean] only consider spaces on the same floor
   # @return [OpenStudio::Model::Space] space object
   def space_get_adjacent_space_with_most_shared_wall_area(space, same_floor = true)
     return get_adjacent_spaces_with_touching_area(same_floor)[0][0]
@@ -2938,8 +2937,8 @@ class Standard
 
   # A function to check whether a space is a return / supply plenum.
   # This function only works on spaces used as a AirLoopSupplyPlenum or AirLoopReturnPlenum
-  # @param [OpenStudio::Model::Space] space
-  # @return boolean true if it is plenum, else false.
+  # @param space [OpenStudio::Model::Space]
+  # @return [Boolean] true if it is plenum, else false.
   def space_is_plenum(space)
     # Get the zone this space is inside
     zone = space.thermalZone
@@ -2970,8 +2969,8 @@ class Standard
 
   # Provide the type of daylighting control type
   #
-  # @param [OpenStudio::Model::Space] OpenStudio Space object
-  # return [String] daylighting control type
+  # @param space [OpenStudio::Model::Space] OpenStudio Space object
+  # @return [String] daylighting control type
   def space_daylighting_control_type(space)
     return 'Stepped'
   end
@@ -2979,9 +2978,17 @@ class Standard
   # Provide the minimum input power fraction for continuous
   # dimming daylighting control
   #
-  # @param [OpenStudio::Model::Space] OpenStudio Space object
-  # return [Float] daylighting minimum input power fraction
+  # @param space [OpenStudio::Model::Space] OpenStudio Space object
+  # @return [Double] daylighting minimum input power fraction
   def space_daylighting_minimum_input_power_fraction(space)
     return 0.3
   end
+
+  # Create and assign PRM computer room electric equipment schedule
+  #
+  # @param space [OpenStudio::Model::Space] OpenStudio Space object
+  # @return [Boolean] returns true if successful, false if not
+  def space_add_prm_computer_room_equipment_schedule(space)
+    return true
+  end
 end