libv8 3.3.10.2

data/lib/libv8/v8/src/mips/regexp-macro-assembler-mips.h

@@ -0,0 +1,252 @@
+// Copyright 2011 the V8 project authors. All rights reserved.
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+//       notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+//       copyright notice, this list of conditions and the following
+//       disclaimer in the documentation and/or other materials provided
+//       with the distribution.
+//     * Neither the name of Google Inc. nor the names of its
+//       contributors may be used to endorse or promote products derived
+//       from this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+#ifndef V8_MIPS_REGEXP_MACRO_ASSEMBLER_MIPS_H_
+#define V8_MIPS_REGEXP_MACRO_ASSEMBLER_MIPS_H_
+
+namespace v8 {
+namespace internal {
+
+#ifdef V8_INTERPRETED_REGEXP
+class RegExpMacroAssemblerMIPS: public RegExpMacroAssembler {
+ public:
+  RegExpMacroAssemblerMIPS();
+  virtual ~RegExpMacroAssemblerMIPS();
+};
+#else  // V8_INTERPRETED_REGEXP
+class RegExpMacroAssemblerMIPS: public NativeRegExpMacroAssembler {
+ public:
+  RegExpMacroAssemblerMIPS(Mode mode, int registers_to_save);
+  virtual ~RegExpMacroAssemblerMIPS();
+  virtual int stack_limit_slack();
+  virtual void AdvanceCurrentPosition(int by);
+  virtual void AdvanceRegister(int reg, int by);
+  virtual void Backtrack();
+  virtual void Bind(Label* label);
+  virtual void CheckAtStart(Label* on_at_start);
+  virtual void CheckCharacter(uint32_t c, Label* on_equal);
+  virtual void CheckCharacterAfterAnd(uint32_t c,
+                                      uint32_t mask,
+                                      Label* on_equal);
+  virtual void CheckCharacterGT(uc16 limit, Label* on_greater);
+  virtual void CheckCharacterLT(uc16 limit, Label* on_less);
+  virtual void CheckCharacters(Vector<const uc16> str,
+                               int cp_offset,
+                               Label* on_failure,
+                               bool check_end_of_string);
+  // A "greedy loop" is a loop that is both greedy and with a simple
+  // body. It has a particularly simple implementation.
+  virtual void CheckGreedyLoop(Label* on_tos_equals_current_position);
+  virtual void CheckNotAtStart(Label* on_not_at_start);
+  virtual void CheckNotBackReference(int start_reg, Label* on_no_match);
+  virtual void CheckNotBackReferenceIgnoreCase(int start_reg,
+                                               Label* on_no_match);
+  virtual void CheckNotRegistersEqual(int reg1, int reg2, Label* on_not_equal);
+  virtual void CheckNotCharacter(uint32_t c, Label* on_not_equal);
+  virtual void CheckNotCharacterAfterAnd(uint32_t c,
+                                         uint32_t mask,
+                                         Label* on_not_equal);
+  virtual void CheckNotCharacterAfterMinusAnd(uc16 c,
+                                              uc16 minus,
+                                              uc16 mask,
+                                              Label* on_not_equal);
+  // Checks whether the given offset from the current position is before
+  // the end of the string.
+  virtual void CheckPosition(int cp_offset, Label* on_outside_input);
+  virtual bool CheckSpecialCharacterClass(uc16 type,
+                                          Label* on_no_match);
+  virtual void Fail();
+  virtual Handle<HeapObject> GetCode(Handle<String> source);
+  virtual void GoTo(Label* label);
+  virtual void IfRegisterGE(int reg, int comparand, Label* if_ge);
+  virtual void IfRegisterLT(int reg, int comparand, Label* if_lt);
+  virtual void IfRegisterEqPos(int reg, Label* if_eq);
+  virtual IrregexpImplementation Implementation();
+  virtual void LoadCurrentCharacter(int cp_offset,
+                                    Label* on_end_of_input,
+                                    bool check_bounds = true,
+                                    int characters = 1);
+  virtual void PopCurrentPosition();
+  virtual void PopRegister(int register_index);
+  virtual void PushBacktrack(Label* label);
+  virtual void PushCurrentPosition();
+  virtual void PushRegister(int register_index,
+                            StackCheckFlag check_stack_limit);
+  virtual void ReadCurrentPositionFromRegister(int reg);
+  virtual void ReadStackPointerFromRegister(int reg);
+  virtual void SetCurrentPositionFromEnd(int by);
+  virtual void SetRegister(int register_index, int to);
+  virtual void Succeed();
+  virtual void WriteCurrentPositionToRegister(int reg, int cp_offset);
+  virtual void ClearRegisters(int reg_from, int reg_to);
+  virtual void WriteStackPointerToRegister(int reg);
+
+  // Called from RegExp if the stack-guard is triggered.
+  // If the code object is relocated, the return address is fixed before
+  // returning.
+  static int CheckStackGuardState(Address* return_address,
+                                  Code* re_code,
+                                  Address re_frame);
+ private:
+  // Offsets from frame_pointer() of function parameters and stored registers.
+  static const int kFramePointer = 0;
+
+  // Above the frame pointer - Stored registers and stack passed parameters.
+  // Registers s0 to s7, fp, and ra.
+  static const int kStoredRegisters = kFramePointer;
+  // Return address (stored from link register, read into pc on return).
+  static const int kReturnAddress = kStoredRegisters + 9 * kPointerSize;
+  static const int kSecondaryReturnAddress = kReturnAddress + kPointerSize;
+  // Stack frame header.
+  static const int kStackFrameHeader = kReturnAddress + kPointerSize;
+  // Stack parameters placed by caller.
+  static const int kRegisterOutput = kStackFrameHeader + 20;
+  static const int kStackHighEnd = kRegisterOutput + kPointerSize;
+  static const int kDirectCall = kStackHighEnd + kPointerSize;
+  static const int kIsolate = kDirectCall + kPointerSize;
+
+  // Below the frame pointer.
+  // Register parameters stored by setup code.
+  static const int kInputEnd = kFramePointer - kPointerSize;
+  static const int kInputStart = kInputEnd - kPointerSize;
+  static const int kStartIndex = kInputStart - kPointerSize;
+  static const int kInputString = kStartIndex - kPointerSize;
+  // When adding local variables remember to push space for them in
+  // the frame in GetCode.
+  static const int kInputStartMinusOne = kInputString - kPointerSize;
+  static const int kAtStart = kInputStartMinusOne - kPointerSize;
+  // First register address. Following registers are below it on the stack.
+  static const int kRegisterZero = kAtStart - kPointerSize;
+
+  // Initial size of code buffer.
+  static const size_t kRegExpCodeSize = 1024;
+
+  // Load a number of characters at the given offset from the
+  // current position, into the current-character register.
+  void LoadCurrentCharacterUnchecked(int cp_offset, int character_count);
+
+  // Check whether preemption has been requested.
+  void CheckPreemption();
+
+  // Check whether we are exceeding the stack limit on the backtrack stack.
+  void CheckStackLimit();
+
+
+  // Generate a call to CheckStackGuardState.
+  void CallCheckStackGuardState(Register scratch);
+
+  // The ebp-relative location of a regexp register.
+  MemOperand register_location(int register_index);
+
+  // Register holding the current input position as negative offset from
+  // the end of the string.
+  inline Register current_input_offset() { return t2; }
+
+  // The register containing the current character after LoadCurrentCharacter.
+  inline Register current_character() { return t3; }
+
+  // Register holding address of the end of the input string.
+  inline Register end_of_input_address() { return t6; }
+
+  // Register holding the frame address. Local variables, parameters and
+  // regexp registers are addressed relative to this.
+  inline Register frame_pointer() { return fp; }
+
+  // The register containing the backtrack stack top. Provides a meaningful
+  // name to the register.
+  inline Register backtrack_stackpointer() { return t4; }
+
+  // Register holding pointer to the current code object.
+  inline Register code_pointer() { return t1; }
+
+  // Byte size of chars in the string to match (decided by the Mode argument).
+  inline int char_size() { return static_cast<int>(mode_); }
+
+  // Equivalent to a conditional branch to the label, unless the label
+  // is NULL, in which case it is a conditional Backtrack.
+  void BranchOrBacktrack(Label* to,
+                         Condition condition,
+                         Register rs,
+                         const Operand& rt);
+
+  // Call and return internally in the generated code in a way that
+  // is GC-safe (i.e., doesn't leave absolute code addresses on the stack)
+  inline void SafeCall(Label* to,
+                       Condition cond,
+                       Register rs,
+                       const Operand& rt);
+  inline void SafeReturn();
+  inline void SafeCallTarget(Label* name);
+
+  // Pushes the value of a register on the backtrack stack. Decrements the
+  // stack pointer by a word size and stores the register's value there.
+  inline void Push(Register source);
+
+  // Pops a value from the backtrack stack. Reads the word at the stack pointer
+  // and increments it by a word size.
+  inline void Pop(Register target);
+
+  // Calls a C function and cleans up the frame alignment done by
+  // by FrameAlign. The called function *is* allowed to trigger a garbage
+  // collection, but may not take more than four arguments (no arguments
+  // passed on the stack), and the first argument will be a pointer to the
+  // return address.
+  inline void CallCFunctionUsingStub(ExternalReference function,
+                                     int num_arguments);
+
+
+  MacroAssembler* masm_;
+
+  // Which mode to generate code for (ASCII or UC16).
+  Mode mode_;
+
+  // One greater than maximal register index actually used.
+  int num_registers_;
+
+  // Number of registers to output at the end (the saved registers
+  // are always 0..num_saved_registers_-1).
+  int num_saved_registers_;
+
+  // Labels used internally.
+  Label entry_label_;
+  Label start_label_;
+  Label success_label_;
+  Label backtrack_label_;
+  Label exit_label_;
+  Label check_preempt_label_;
+  Label stack_overflow_label_;
+  Label internal_failure_label_;
+};
+
+#endif  // V8_INTERPRETED_REGEXP
+
+
+}}  // namespace v8::internal
+
+#endif  // V8_MIPS_REGEXP_MACRO_ASSEMBLER_MIPS_H_
+

data/lib/libv8/v8/src/mips/simulator-mips.cc

@@ -0,0 +1,2621 @@
+// Copyright 2011 the V8 project authors. All rights reserved.
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+//       notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+//       copyright notice, this list of conditions and the following
+//       disclaimer in the documentation and/or other materials provided
+//       with the distribution.
+//     * Neither the name of Google Inc. nor the names of its
+//       contributors may be used to endorse or promote products derived
+//       from this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#include <stdlib.h>
+#include <math.h>
+#include <limits.h>
+#include <cstdarg>
+#include "v8.h"
+
+#if defined(V8_TARGET_ARCH_MIPS)
+
+#include "disasm.h"
+#include "assembler.h"
+#include "globals.h"    // Need the BitCast.
+#include "mips/constants-mips.h"
+#include "mips/simulator-mips.h"
+
+
+// Only build the simulator if not compiling for real MIPS hardware.
+#if defined(USE_SIMULATOR)
+
+namespace v8 {
+namespace internal {
+
+// Utils functions.
+bool HaveSameSign(int32_t a, int32_t b) {
+  return ((a ^ b) >= 0);
+}
+
+
+uint32_t get_fcsr_condition_bit(uint32_t cc) {
+  if (cc == 0) {
+    return 23;
+  } else {
+    return 24 + cc;
+  }
+}
+
+
+// This macro provides a platform independent use of sscanf. The reason for
+// SScanF not being implemented in a platform independent was through
+// ::v8::internal::OS in the same way as SNPrintF is that the Windows C Run-Time
+// Library does not provide vsscanf.
+#define SScanF sscanf  // NOLINT
+
+// The MipsDebugger class is used by the simulator while debugging simulated
+// code.
+class MipsDebugger {
+ public:
+  explicit MipsDebugger(Simulator* sim);
+  ~MipsDebugger();
+
+  void Stop(Instruction* instr);
+  void Debug();
+  // Print all registers with a nice formatting.
+  void PrintAllRegs();
+  void PrintAllRegsIncludingFPU();
+
+ private:
+  // We set the breakpoint code to 0xfffff to easily recognize it.
+  static const Instr kBreakpointInstr = SPECIAL | BREAK | 0xfffff << 6;
+  static const Instr kNopInstr =  0x0;
+
+  Simulator* sim_;
+
+  int32_t GetRegisterValue(int regnum);
+  int32_t GetFPURegisterValueInt(int regnum);
+  int64_t GetFPURegisterValueLong(int regnum);
+  float GetFPURegisterValueFloat(int regnum);
+  double GetFPURegisterValueDouble(int regnum);
+  bool GetValue(const char* desc, int32_t* value);
+
+  // Set or delete a breakpoint. Returns true if successful.
+  bool SetBreakpoint(Instruction* breakpc);
+  bool DeleteBreakpoint(Instruction* breakpc);
+
+  // Undo and redo all breakpoints. This is needed to bracket disassembly and
+  // execution to skip past breakpoints when run from the debugger.
+  void UndoBreakpoints();
+  void RedoBreakpoints();
+};
+
+MipsDebugger::MipsDebugger(Simulator* sim) {
+  sim_ = sim;
+}
+
+
+MipsDebugger::~MipsDebugger() {
+}
+
+
+#ifdef GENERATED_CODE_COVERAGE
+static FILE* coverage_log = NULL;
+
+
+static void InitializeCoverage() {
+  char* file_name = getenv("V8_GENERATED_CODE_COVERAGE_LOG");
+  if (file_name != NULL) {
+    coverage_log = fopen(file_name, "aw+");
+  }
+}
+
+
+void MipsDebugger::Stop(Instruction* instr) {
+  UNIMPLEMENTED_MIPS();
+  char* str = reinterpret_cast<char*>(instr->InstructionBits());
+  if (strlen(str) > 0) {
+    if (coverage_log != NULL) {
+      fprintf(coverage_log, "%s\n", str);
+      fflush(coverage_log);
+    }
+    instr->SetInstructionBits(0x0);  // Overwrite with nop.
+  }
+  sim_->set_pc(sim_->get_pc() + Instruction::kInstrSize);
+}
+
+
+#else  // GENERATED_CODE_COVERAGE
+
+#define UNSUPPORTED() printf("Unsupported instruction.\n");
+
+static void InitializeCoverage() {}
+
+
+void MipsDebugger::Stop(Instruction* instr) {
+  const char* str = reinterpret_cast<char*>(instr->InstructionBits());
+  PrintF("Simulator hit %s\n", str);
+  sim_->set_pc(sim_->get_pc() + Instruction::kInstrSize);
+  Debug();
+}
+#endif  // GENERATED_CODE_COVERAGE
+
+
+int32_t MipsDebugger::GetRegisterValue(int regnum) {
+  if (regnum == kNumSimuRegisters) {
+    return sim_->get_pc();
+  } else {
+    return sim_->get_register(regnum);
+  }
+}
+
+
+int32_t MipsDebugger::GetFPURegisterValueInt(int regnum) {
+  if (regnum == kNumFPURegisters) {
+    return sim_->get_pc();
+  } else {
+    return sim_->get_fpu_register(regnum);
+  }
+}
+
+
+int64_t MipsDebugger::GetFPURegisterValueLong(int regnum) {
+  if (regnum == kNumFPURegisters) {
+    return sim_->get_pc();
+  } else {
+    return sim_->get_fpu_register_long(regnum);
+  }
+}
+
+
+float MipsDebugger::GetFPURegisterValueFloat(int regnum) {
+  if (regnum == kNumFPURegisters) {
+    return sim_->get_pc();
+  } else {
+    return sim_->get_fpu_register_float(regnum);
+  }
+}
+
+
+double MipsDebugger::GetFPURegisterValueDouble(int regnum) {
+  if (regnum == kNumFPURegisters) {
+    return sim_->get_pc();
+  } else {
+    return sim_->get_fpu_register_double(regnum);
+  }
+}
+
+
+bool MipsDebugger::GetValue(const char* desc, int32_t* value) {
+  int regnum = Registers::Number(desc);
+  int fpuregnum = FPURegisters::Number(desc);
+
+  if (regnum != kInvalidRegister) {
+    *value = GetRegisterValue(regnum);
+    return true;
+  } else if (fpuregnum != kInvalidFPURegister) {
+    *value = GetFPURegisterValueInt(fpuregnum);
+    return true;
+  } else if (strncmp(desc, "0x", 2) == 0) {
+    return SScanF(desc, "%x", reinterpret_cast<uint32_t*>(value)) == 1;
+  } else {
+    return SScanF(desc, "%i", value) == 1;
+  }
+  return false;
+}
+
+
+bool MipsDebugger::SetBreakpoint(Instruction* breakpc) {
+  // Check if a breakpoint can be set. If not return without any side-effects.
+  if (sim_->break_pc_ != NULL) {
+    return false;
+  }
+
+  // Set the breakpoint.
+  sim_->break_pc_ = breakpc;
+  sim_->break_instr_ = breakpc->InstructionBits();
+  // Not setting the breakpoint instruction in the code itself. It will be set
+  // when the debugger shell continues.
+  return true;
+}
+
+
+bool MipsDebugger::DeleteBreakpoint(Instruction* breakpc) {
+  if (sim_->break_pc_ != NULL) {
+    sim_->break_pc_->SetInstructionBits(sim_->break_instr_);
+  }
+
+  sim_->break_pc_ = NULL;
+  sim_->break_instr_ = 0;
+  return true;
+}
+
+
+void MipsDebugger::UndoBreakpoints() {
+  if (sim_->break_pc_ != NULL) {
+    sim_->break_pc_->SetInstructionBits(sim_->break_instr_);
+  }
+}
+
+
+void MipsDebugger::RedoBreakpoints() {
+  if (sim_->break_pc_ != NULL) {
+    sim_->break_pc_->SetInstructionBits(kBreakpointInstr);
+  }
+}
+
+
+void MipsDebugger::PrintAllRegs() {
+#define REG_INFO(n) Registers::Name(n), GetRegisterValue(n), GetRegisterValue(n)
+
+  PrintF("\n");
+  // at, v0, a0.
+  PrintF("%3s: 0x%08x %10d\t%3s: 0x%08x %10d\t%3s: 0x%08x %10d\n",
+         REG_INFO(1), REG_INFO(2), REG_INFO(4));
+  // v1, a1.
+  PrintF("%26s\t%3s: 0x%08x %10d\t%3s: 0x%08x %10d\n",
+         "", REG_INFO(3), REG_INFO(5));
+  // a2.
+  PrintF("%26s\t%26s\t%3s: 0x%08x %10d\n", "", "", REG_INFO(6));
+  // a3.
+  PrintF("%26s\t%26s\t%3s: 0x%08x %10d\n", "", "", REG_INFO(7));
+  PrintF("\n");
+  // t0-t7, s0-s7
+  for (int i = 0; i < 8; i++) {
+    PrintF("%3s: 0x%08x %10d\t%3s: 0x%08x %10d\n",
+           REG_INFO(8+i), REG_INFO(16+i));
+  }
+  PrintF("\n");
+  // t8, k0, LO.
+  PrintF("%3s: 0x%08x %10d\t%3s: 0x%08x %10d\t%3s: 0x%08x %10d\n",
+         REG_INFO(24), REG_INFO(26), REG_INFO(32));
+  // t9, k1, HI.
+  PrintF("%3s: 0x%08x %10d\t%3s: 0x%08x %10d\t%3s: 0x%08x %10d\n",
+         REG_INFO(25), REG_INFO(27), REG_INFO(33));
+  // sp, fp, gp.
+  PrintF("%3s: 0x%08x %10d\t%3s: 0x%08x %10d\t%3s: 0x%08x %10d\n",
+         REG_INFO(29), REG_INFO(30), REG_INFO(28));
+  // pc.
+  PrintF("%3s: 0x%08x %10d\t%3s: 0x%08x %10d\n",
+         REG_INFO(31), REG_INFO(34));
+
+#undef REG_INFO
+#undef FPU_REG_INFO
+}
+
+
+void MipsDebugger::PrintAllRegsIncludingFPU() {
+#define FPU_REG_INFO(n) FPURegisters::Name(n), FPURegisters::Name(n+1), \
+        GetFPURegisterValueInt(n+1), \
+        GetFPURegisterValueInt(n), \
+                        GetFPURegisterValueDouble(n)
+
+  PrintAllRegs();
+
+  PrintF("\n\n");
+  // f0, f1, f2, ... f31.
+  PrintF("%3s,%3s: 0x%08x%08x %16.4e\n", FPU_REG_INFO(0) );
+  PrintF("%3s,%3s: 0x%08x%08x %16.4e\n", FPU_REG_INFO(2) );
+  PrintF("%3s,%3s: 0x%08x%08x %16.4e\n", FPU_REG_INFO(4) );
+  PrintF("%3s,%3s: 0x%08x%08x %16.4e\n", FPU_REG_INFO(6) );
+  PrintF("%3s,%3s: 0x%08x%08x %16.4e\n", FPU_REG_INFO(8) );
+  PrintF("%3s,%3s: 0x%08x%08x %16.4e\n", FPU_REG_INFO(10));
+  PrintF("%3s,%3s: 0x%08x%08x %16.4e\n", FPU_REG_INFO(12));
+  PrintF("%3s,%3s: 0x%08x%08x %16.4e\n", FPU_REG_INFO(14));
+  PrintF("%3s,%3s: 0x%08x%08x %16.4e\n", FPU_REG_INFO(16));
+  PrintF("%3s,%3s: 0x%08x%08x %16.4e\n", FPU_REG_INFO(18));
+  PrintF("%3s,%3s: 0x%08x%08x %16.4e\n", FPU_REG_INFO(20));
+  PrintF("%3s,%3s: 0x%08x%08x %16.4e\n", FPU_REG_INFO(22));
+  PrintF("%3s,%3s: 0x%08x%08x %16.4e\n", FPU_REG_INFO(24));
+  PrintF("%3s,%3s: 0x%08x%08x %16.4e\n", FPU_REG_INFO(26));
+  PrintF("%3s,%3s: 0x%08x%08x %16.4e\n", FPU_REG_INFO(28));
+  PrintF("%3s,%3s: 0x%08x%08x %16.4e\n", FPU_REG_INFO(30));
+
+#undef REG_INFO
+#undef FPU_REG_INFO
+}
+
+
+void MipsDebugger::Debug() {
+  intptr_t last_pc = -1;
+  bool done = false;
+
+#define COMMAND_SIZE 63
+#define ARG_SIZE 255
+
+#define STR(a) #a
+#define XSTR(a) STR(a)
+
+  char cmd[COMMAND_SIZE + 1];
+  char arg1[ARG_SIZE + 1];
+  char arg2[ARG_SIZE + 1];
+  char* argv[3] = { cmd, arg1, arg2 };
+
+  // Make sure to have a proper terminating character if reaching the limit.
+  cmd[COMMAND_SIZE] = 0;
+  arg1[ARG_SIZE] = 0;
+  arg2[ARG_SIZE] = 0;
+
+  // Undo all set breakpoints while running in the debugger shell. This will
+  // make them invisible to all commands.
+  UndoBreakpoints();
+
+  while (!done && (sim_->get_pc() != Simulator::end_sim_pc)) {
+    if (last_pc != sim_->get_pc()) {
+      disasm::NameConverter converter;
+      disasm::Disassembler dasm(converter);
+      // Use a reasonably large buffer.
+      v8::internal::EmbeddedVector<char, 256> buffer;
+      dasm.InstructionDecode(buffer,
+                             reinterpret_cast<byte*>(sim_->get_pc()));
+      PrintF("  0x%08x  %s\n", sim_->get_pc(), buffer.start());
+      last_pc = sim_->get_pc();
+    }
+    char* line = ReadLine("sim> ");
+    if (line == NULL) {
+      break;
+    } else {
+      // Use sscanf to parse the individual parts of the command line. At the
+      // moment no command expects more than two parameters.
+      int argc = SScanF(line,
+                        "%" XSTR(COMMAND_SIZE) "s "
+                        "%" XSTR(ARG_SIZE) "s "
+                        "%" XSTR(ARG_SIZE) "s",
+                        cmd, arg1, arg2);
+      if ((strcmp(cmd, "si") == 0) || (strcmp(cmd, "stepi") == 0)) {
+        Instruction* instr = reinterpret_cast<Instruction*>(sim_->get_pc());
+        if (!(instr->IsTrap()) ||
+            instr->InstructionBits() == rtCallRedirInstr) {
+          sim_->InstructionDecode(
+              reinterpret_cast<Instruction*>(sim_->get_pc()));
+        } else {
+          // Allow si to jump over generated breakpoints.
+          PrintF("/!\\ Jumping over generated breakpoint.\n");
+          sim_->set_pc(sim_->get_pc() + Instruction::kInstrSize);
+        }
+      } else if ((strcmp(cmd, "c") == 0) || (strcmp(cmd, "cont") == 0)) {
+        // Execute the one instruction we broke at with breakpoints disabled.
+        sim_->InstructionDecode(reinterpret_cast<Instruction*>(sim_->get_pc()));
+        // Leave the debugger shell.
+        done = true;
+      } else if ((strcmp(cmd, "p") == 0) || (strcmp(cmd, "print") == 0)) {
+        if (argc == 2) {
+          int32_t value;
+          float fvalue;
+          if (strcmp(arg1, "all") == 0) {
+            PrintAllRegs();
+          } else if (strcmp(arg1, "allf") == 0) {
+            PrintAllRegsIncludingFPU();
+          } else {
+            int regnum = Registers::Number(arg1);
+            int fpuregnum = FPURegisters::Number(arg1);
+
+            if (regnum != kInvalidRegister) {
+              value = GetRegisterValue(regnum);
+              PrintF("%s: 0x%08x %d \n", arg1, value, value);
+            } else if (fpuregnum != kInvalidFPURegister) {
+              if (fpuregnum % 2 == 1) {
+                value = GetFPURegisterValueInt(fpuregnum);
+                fvalue = GetFPURegisterValueFloat(fpuregnum);
+                PrintF("%s: 0x%08x %11.4e\n", arg1, value, fvalue);
+              } else {
+                double dfvalue;
+                int32_t lvalue1 = GetFPURegisterValueInt(fpuregnum);
+                int32_t lvalue2 = GetFPURegisterValueInt(fpuregnum + 1);
+                dfvalue = GetFPURegisterValueDouble(fpuregnum);
+                PrintF("%3s,%3s: 0x%08x%08x %16.4e\n",
+                       FPURegisters::Name(fpuregnum+1),
+                       FPURegisters::Name(fpuregnum),
+                       lvalue1,
+                       lvalue2,
+                       dfvalue);
+              }
+            } else {
+              PrintF("%s unrecognized\n", arg1);
+            }
+          }
+        } else {
+          if (argc == 3) {
+            if (strcmp(arg2, "single") == 0) {
+              int32_t value;
+              float fvalue;
+              int fpuregnum = FPURegisters::Number(arg1);
+
+              if (fpuregnum != kInvalidFPURegister) {
+                value = GetFPURegisterValueInt(fpuregnum);
+                fvalue = GetFPURegisterValueFloat(fpuregnum);
+                PrintF("%s: 0x%08x %11.4e\n", arg1, value, fvalue);
+              } else {
+                PrintF("%s unrecognized\n", arg1);
+              }
+            } else {
+              PrintF("print <fpu register> single\n");
+            }
+          } else {
+            PrintF("print <register> or print <fpu register> single\n");
+          }
+        }
+      } else if ((strcmp(cmd, "po") == 0)
+                 || (strcmp(cmd, "printobject") == 0)) {
+        if (argc == 2) {
+          int32_t value;
+          if (GetValue(arg1, &value)) {
+            Object* obj = reinterpret_cast<Object*>(value);
+            PrintF("%s: \n", arg1);
+#ifdef DEBUG
+            obj->PrintLn();
+#else
+            obj->ShortPrint();
+            PrintF("\n");
+#endif
+          } else {
+            PrintF("%s unrecognized\n", arg1);
+          }
+        } else {
+          PrintF("printobject <value>\n");
+        }
+      } else if (strcmp(cmd, "stack") == 0 || strcmp(cmd, "mem") == 0) {
+        int32_t* cur = NULL;
+        int32_t* end = NULL;
+        int next_arg = 1;
+
+        if (strcmp(cmd, "stack") == 0) {
+          cur = reinterpret_cast<int32_t*>(sim_->get_register(Simulator::sp));
+        } else {  // Command "mem".
+          int32_t value;
+          if (!GetValue(arg1, &value)) {
+            PrintF("%s unrecognized\n", arg1);
+            continue;
+          }
+          cur = reinterpret_cast<int32_t*>(value);
+          next_arg++;
+        }
+
+        int32_t words;
+        if (argc == next_arg) {
+          words = 10;
+        } else if (argc == next_arg + 1) {
+          if (!GetValue(argv[next_arg], &words)) {
+            words = 10;
+          }
+        }
+        end = cur + words;
+
+        while (cur < end) {
+          PrintF("  0x%08x:  0x%08x %10d",
+                 reinterpret_cast<intptr_t>(cur), *cur, *cur);
+          HeapObject* obj = reinterpret_cast<HeapObject*>(*cur);
+          int value = *cur;
+          Heap* current_heap = v8::internal::Isolate::Current()->heap();
+          if (current_heap->Contains(obj) || ((value & 1) == 0)) {
+            PrintF(" (");
+            if ((value & 1) == 0) {
+              PrintF("smi %d", value / 2);
+            } else {
+              obj->ShortPrint();
+            }
+            PrintF(")");
+          }
+          PrintF("\n");
+          cur++;
+        }
+
+      } else if ((strcmp(cmd, "disasm") == 0) ||
+                 (strcmp(cmd, "dpc") == 0) ||
+                 (strcmp(cmd, "di") == 0)) {
+        disasm::NameConverter converter;
+        disasm::Disassembler dasm(converter);
+        // Use a reasonably large buffer.
+        v8::internal::EmbeddedVector<char, 256> buffer;
+
+        byte* cur = NULL;
+        byte* end = NULL;
+
+        if (argc == 1) {
+          cur = reinterpret_cast<byte*>(sim_->get_pc());
+          end = cur + (10 * Instruction::kInstrSize);
+        } else if (argc == 2) {
+          int regnum = Registers::Number(arg1);
+          if (regnum != kInvalidRegister || strncmp(arg1, "0x", 2) == 0) {
+            // The argument is an address or a register name.
+            int32_t value;
+            if (GetValue(arg1, &value)) {
+              cur = reinterpret_cast<byte*>(value);
+              // Disassemble 10 instructions at <arg1>.
+              end = cur + (10 * Instruction::kInstrSize);
+            }
+          } else {
+            // The argument is the number of instructions.
+            int32_t value;
+            if (GetValue(arg1, &value)) {
+              cur = reinterpret_cast<byte*>(sim_->get_pc());
+              // Disassemble <arg1> instructions.
+              end = cur + (value * Instruction::kInstrSize);
+            }
+          }
+        } else {
+          int32_t value1;
+          int32_t value2;
+          if (GetValue(arg1, &value1) && GetValue(arg2, &value2)) {
+            cur = reinterpret_cast<byte*>(value1);
+            end = cur + (value2 * Instruction::kInstrSize);
+          }
+        }
+
+        while (cur < end) {
+          dasm.InstructionDecode(buffer, cur);
+          PrintF("  0x%08x  %s\n",
+              reinterpret_cast<intptr_t>(cur), buffer.start());
+          cur += Instruction::kInstrSize;
+        }
+      } else if (strcmp(cmd, "gdb") == 0) {
+        PrintF("relinquishing control to gdb\n");
+        v8::internal::OS::DebugBreak();
+        PrintF("regaining control from gdb\n");
+      } else if (strcmp(cmd, "break") == 0) {
+        if (argc == 2) {
+          int32_t value;
+          if (GetValue(arg1, &value)) {
+            if (!SetBreakpoint(reinterpret_cast<Instruction*>(value))) {
+              PrintF("setting breakpoint failed\n");
+            }
+          } else {
+            PrintF("%s unrecognized\n", arg1);
+          }
+        } else {
+          PrintF("break <address>\n");
+        }
+      } else if (strcmp(cmd, "del") == 0) {
+        if (!DeleteBreakpoint(NULL)) {
+          PrintF("deleting breakpoint failed\n");
+        }
+      } else if (strcmp(cmd, "flags") == 0) {
+        PrintF("No flags on MIPS !\n");
+      } else if (strcmp(cmd, "unstop") == 0) {
+          PrintF("Unstop command not implemented on MIPS.");
+      } else if ((strcmp(cmd, "stat") == 0) || (strcmp(cmd, "st") == 0)) {
+        // Print registers and disassemble.
+        PrintAllRegs();
+        PrintF("\n");
+
+        disasm::NameConverter converter;
+        disasm::Disassembler dasm(converter);
+        // Use a reasonably large buffer.
+        v8::internal::EmbeddedVector<char, 256> buffer;
+
+        byte* cur = NULL;
+        byte* end = NULL;
+
+        if (argc == 1) {
+          cur = reinterpret_cast<byte*>(sim_->get_pc());
+          end = cur + (10 * Instruction::kInstrSize);
+        } else if (argc == 2) {
+          int32_t value;
+          if (GetValue(arg1, &value)) {
+            cur = reinterpret_cast<byte*>(value);
+            // no length parameter passed, assume 10 instructions
+            end = cur + (10 * Instruction::kInstrSize);
+          }
+        } else {
+          int32_t value1;
+          int32_t value2;
+          if (GetValue(arg1, &value1) && GetValue(arg2, &value2)) {
+            cur = reinterpret_cast<byte*>(value1);
+            end = cur + (value2 * Instruction::kInstrSize);
+          }
+        }
+
+        while (cur < end) {
+          dasm.InstructionDecode(buffer, cur);
+          PrintF("  0x%08x  %s\n",
+                 reinterpret_cast<intptr_t>(cur), buffer.start());
+          cur += Instruction::kInstrSize;
+        }
+      } else if ((strcmp(cmd, "h") == 0) || (strcmp(cmd, "help") == 0)) {
+        PrintF("cont\n");
+        PrintF("  continue execution (alias 'c')\n");
+        PrintF("stepi\n");
+        PrintF("  step one instruction (alias 'si')\n");
+        PrintF("print <register>\n");
+        PrintF("  print register content (alias 'p')\n");
+        PrintF("  use register name 'all' to print all registers\n");
+        PrintF("printobject <register>\n");
+        PrintF("  print an object from a register (alias 'po')\n");
+        PrintF("stack [<words>]\n");
+        PrintF("  dump stack content, default dump 10 words)\n");
+        PrintF("mem <address> [<words>]\n");
+        PrintF("  dump memory content, default dump 10 words)\n");
+        PrintF("flags\n");
+        PrintF("  print flags\n");
+        PrintF("disasm [<instructions>]\n");
+        PrintF("disasm [<address/register>]\n");
+        PrintF("disasm [[<address/register>] <instructions>]\n");
+        PrintF("  disassemble code, default is 10 instructions\n");
+        PrintF("  from pc (alias 'di')\n");
+        PrintF("gdb\n");
+        PrintF("  enter gdb\n");
+        PrintF("break <address>\n");
+        PrintF("  set a break point on the address\n");
+        PrintF("del\n");
+        PrintF("  delete the breakpoint\n");
+        PrintF("unstop\n");
+        PrintF("  ignore the stop instruction at the current location");
+        PrintF(" from now on\n");
+      } else {
+        PrintF("Unknown command: %s\n", cmd);
+      }
+    }
+    DeleteArray(line);
+  }
+
+  // Add all the breakpoints back to stop execution and enter the debugger
+  // shell when hit.
+  RedoBreakpoints();
+
+#undef COMMAND_SIZE
+#undef ARG_SIZE
+
+#undef STR
+#undef XSTR
+}
+
+
+static bool ICacheMatch(void* one, void* two) {
+  ASSERT((reinterpret_cast<intptr_t>(one) & CachePage::kPageMask) == 0);
+  ASSERT((reinterpret_cast<intptr_t>(two) & CachePage::kPageMask) == 0);
+  return one == two;
+}
+
+
+static uint32_t ICacheHash(void* key) {
+  return static_cast<uint32_t>(reinterpret_cast<uintptr_t>(key)) >> 2;
+}
+
+
+static bool AllOnOnePage(uintptr_t start, int size) {
+  intptr_t start_page = (start & ~CachePage::kPageMask);
+  intptr_t end_page = ((start + size) & ~CachePage::kPageMask);
+  return start_page == end_page;
+}
+
+
+void Simulator::FlushICache(v8::internal::HashMap* i_cache,
+                            void* start_addr,
+                            size_t size) {
+  intptr_t start = reinterpret_cast<intptr_t>(start_addr);
+  int intra_line = (start & CachePage::kLineMask);
+  start -= intra_line;
+  size += intra_line;
+  size = ((size - 1) | CachePage::kLineMask) + 1;
+  int offset = (start & CachePage::kPageMask);
+  while (!AllOnOnePage(start, size - 1)) {
+    int bytes_to_flush = CachePage::kPageSize - offset;
+    FlushOnePage(i_cache, start, bytes_to_flush);
+    start += bytes_to_flush;
+    size -= bytes_to_flush;
+    ASSERT_EQ(0, start & CachePage::kPageMask);
+    offset = 0;
+  }
+  if (size != 0) {
+    FlushOnePage(i_cache, start, size);
+  }
+}
+
+
+CachePage* Simulator::GetCachePage(v8::internal::HashMap* i_cache, void* page) {
+  v8::internal::HashMap::Entry* entry = i_cache->Lookup(page,
+                                                        ICacheHash(page),
+                                                        true);
+  if (entry->value == NULL) {
+    CachePage* new_page = new CachePage();
+    entry->value = new_page;
+  }
+  return reinterpret_cast<CachePage*>(entry->value);
+}
+
+
+// Flush from start up to and not including start + size.
+void Simulator::FlushOnePage(v8::internal::HashMap* i_cache,
+                             intptr_t start,
+                             int size) {
+  ASSERT(size <= CachePage::kPageSize);
+  ASSERT(AllOnOnePage(start, size - 1));
+  ASSERT((start & CachePage::kLineMask) == 0);
+  ASSERT((size & CachePage::kLineMask) == 0);
+  void* page = reinterpret_cast<void*>(start & (~CachePage::kPageMask));
+  int offset = (start & CachePage::kPageMask);
+  CachePage* cache_page = GetCachePage(i_cache, page);
+  char* valid_bytemap = cache_page->ValidityByte(offset);
+  memset(valid_bytemap, CachePage::LINE_INVALID, size >> CachePage::kLineShift);
+}
+
+
+void Simulator::CheckICache(v8::internal::HashMap* i_cache,
+                            Instruction* instr) {
+  intptr_t address = reinterpret_cast<intptr_t>(instr);
+  void* page = reinterpret_cast<void*>(address & (~CachePage::kPageMask));
+  void* line = reinterpret_cast<void*>(address & (~CachePage::kLineMask));
+  int offset = (address & CachePage::kPageMask);
+  CachePage* cache_page = GetCachePage(i_cache, page);
+  char* cache_valid_byte = cache_page->ValidityByte(offset);
+  bool cache_hit = (*cache_valid_byte == CachePage::LINE_VALID);
+  char* cached_line = cache_page->CachedData(offset & ~CachePage::kLineMask);
+  if (cache_hit) {
+    // Check that the data in memory matches the contents of the I-cache.
+    CHECK(memcmp(reinterpret_cast<void*>(instr),
+                 cache_page->CachedData(offset),
+                 Instruction::kInstrSize) == 0);
+  } else {
+    // Cache miss.  Load memory into the cache.
+    memcpy(cached_line, line, CachePage::kLineLength);
+    *cache_valid_byte = CachePage::LINE_VALID;
+  }
+}
+
+
+void Simulator::Initialize(Isolate* isolate) {
+  if (isolate->simulator_initialized()) return;
+  isolate->set_simulator_initialized(true);
+  ::v8::internal::ExternalReference::set_redirector(isolate,
+                                                    &RedirectExternalReference);
+}
+
+
+Simulator::Simulator(Isolate* isolate) : isolate_(isolate) {
+  i_cache_ = isolate_->simulator_i_cache();
+  if (i_cache_ == NULL) {
+    i_cache_ = new v8::internal::HashMap(&ICacheMatch);
+    isolate_->set_simulator_i_cache(i_cache_);
+  }
+  Initialize(isolate);
+  // Setup simulator support first. Some of this information is needed to
+  // setup the architecture state.
+  stack_ = reinterpret_cast<char*>(malloc(stack_size_));
+  pc_modified_ = false;
+  icount_ = 0;
+  break_count_ = 0;
+  break_pc_ = NULL;
+  break_instr_ = 0;
+
+  // Setup architecture state.
+  // All registers are initialized to zero to start with.
+  for (int i = 0; i < kNumSimuRegisters; i++) {
+    registers_[i] = 0;
+  }
+  for (int i = 0; i < kNumFPURegisters; i++) {
+    FPUregisters_[i] = 0;
+  }
+  FCSR_ = 0;
+
+  // The sp is initialized to point to the bottom (high address) of the
+  // allocated stack area. To be safe in potential stack underflows we leave
+  // some buffer below.
+  registers_[sp] = reinterpret_cast<int32_t>(stack_) + stack_size_ - 64;
+  // The ra and pc are initialized to a known bad value that will cause an
+  // access violation if the simulator ever tries to execute it.
+  registers_[pc] = bad_ra;
+  registers_[ra] = bad_ra;
+  InitializeCoverage();
+  for (int i = 0; i < kNumExceptions; i++) {
+    exceptions[i] = 0;
+  }
+}
+
+
+// When the generated code calls an external reference we need to catch that in
+// the simulator.  The external reference will be a function compiled for the
+// host architecture.  We need to call that function instead of trying to
+// execute it with the simulator.  We do that by redirecting the external
+// reference to a swi (software-interrupt) instruction that is handled by
+// the simulator.  We write the original destination of the jump just at a known
+// offset from the swi instruction so the simulator knows what to call.
+class Redirection {
+ public:
+  Redirection(void* external_function, ExternalReference::Type type)
+      : external_function_(external_function),
+        swi_instruction_(rtCallRedirInstr),
+        type_(type),
+        next_(NULL) {
+    Isolate* isolate = Isolate::Current();
+    next_ = isolate->simulator_redirection();
+    Simulator::current(isolate)->
+        FlushICache(isolate->simulator_i_cache(),
+                    reinterpret_cast<void*>(&swi_instruction_),
+                    Instruction::kInstrSize);
+    isolate->set_simulator_redirection(this);
+  }
+
+  void* address_of_swi_instruction() {
+    return reinterpret_cast<void*>(&swi_instruction_);
+  }
+
+  void* external_function() { return external_function_; }
+  ExternalReference::Type type() { return type_; }
+
+  static Redirection* Get(void* external_function,
+                          ExternalReference::Type type) {
+    Isolate* isolate = Isolate::Current();
+    Redirection* current = isolate->simulator_redirection();
+    for (; current != NULL; current = current->next_) {
+      if (current->external_function_ == external_function) return current;
+    }
+    return new Redirection(external_function, type);
+  }
+
+  static Redirection* FromSwiInstruction(Instruction* swi_instruction) {
+    char* addr_of_swi = reinterpret_cast<char*>(swi_instruction);
+    char* addr_of_redirection =
+        addr_of_swi - OFFSET_OF(Redirection, swi_instruction_);
+    return reinterpret_cast<Redirection*>(addr_of_redirection);
+  }
+
+ private:
+  void* external_function_;
+  uint32_t swi_instruction_;
+  ExternalReference::Type type_;
+  Redirection* next_;
+};
+
+
+void* Simulator::RedirectExternalReference(void* external_function,
+                                           ExternalReference::Type type) {
+  Redirection* redirection = Redirection::Get(external_function, type);
+  return redirection->address_of_swi_instruction();
+}
+
+
+// Get the active Simulator for the current thread.
+Simulator* Simulator::current(Isolate* isolate) {
+  v8::internal::Isolate::PerIsolateThreadData* isolate_data =
+       isolate->FindOrAllocatePerThreadDataForThisThread();
+  ASSERT(isolate_data != NULL);
+  ASSERT(isolate_data != NULL);
+
+  Simulator* sim = isolate_data->simulator();
+  if (sim == NULL) {
+    // TODO(146): delete the simulator object when a thread/isolate goes away.
+    sim = new Simulator(isolate);
+    isolate_data->set_simulator(sim);
+  }
+  return sim;
+}
+
+
+// Sets the register in the architecture state. It will also deal with updating
+// Simulator internal state for special registers such as PC.
+void Simulator::set_register(int reg, int32_t value) {
+  ASSERT((reg >= 0) && (reg < kNumSimuRegisters));
+  if (reg == pc) {
+    pc_modified_ = true;
+  }
+
+  // Zero register always holds 0.
+  registers_[reg] = (reg == 0) ? 0 : value;
+}
+
+
+void Simulator::set_fpu_register(int fpureg, int32_t value) {
+  ASSERT((fpureg >= 0) && (fpureg < kNumFPURegisters));
+  FPUregisters_[fpureg] = value;
+}
+
+
+void Simulator::set_fpu_register_float(int fpureg, float value) {
+  ASSERT((fpureg >= 0) && (fpureg < kNumFPURegisters));
+  *BitCast<float*>(&FPUregisters_[fpureg]) = value;
+}
+
+
+void Simulator::set_fpu_register_double(int fpureg, double value) {
+  ASSERT((fpureg >= 0) && (fpureg < kNumFPURegisters) && ((fpureg % 2) == 0));
+  *BitCast<double*>(&FPUregisters_[fpureg]) = value;
+}
+
+
+// Get the register from the architecture state. This function does handle
+// the special case of accessing the PC register.
+int32_t Simulator::get_register(int reg) const {
+  ASSERT((reg >= 0) && (reg < kNumSimuRegisters));
+  if (reg == 0)
+    return 0;
+  else
+    return registers_[reg] + ((reg == pc) ? Instruction::kPCReadOffset : 0);
+}
+
+
+int32_t Simulator::get_fpu_register(int fpureg) const {
+  ASSERT((fpureg >= 0) && (fpureg < kNumFPURegisters));
+  return FPUregisters_[fpureg];
+}
+
+
+int64_t Simulator::get_fpu_register_long(int fpureg) const {
+  ASSERT((fpureg >= 0) && (fpureg < kNumFPURegisters) && ((fpureg % 2) == 0));
+  return *BitCast<int64_t*>(
+      const_cast<int32_t*>(&FPUregisters_[fpureg]));
+}
+
+
+float Simulator::get_fpu_register_float(int fpureg) const {
+  ASSERT((fpureg >= 0) && (fpureg < kNumFPURegisters));
+  return *BitCast<float*>(
+      const_cast<int32_t*>(&FPUregisters_[fpureg]));
+}
+
+
+double Simulator::get_fpu_register_double(int fpureg) const {
+  ASSERT((fpureg >= 0) && (fpureg < kNumFPURegisters) && ((fpureg % 2) == 0));
+  return *BitCast<double*>(const_cast<int32_t*>(&FPUregisters_[fpureg]));
+}
+
+
+// For use in calls that take two double values, constructed either
+// from a0-a3 or f12 and f14.
+void Simulator::GetFpArgs(double* x, double* y) {
+  if (!IsMipsSoftFloatABI) {
+    *x = get_fpu_register_double(12);
+    *y = get_fpu_register_double(14);
+  } else {
+    // We use a char buffer to get around the strict-aliasing rules which
+    // otherwise allow the compiler to optimize away the copy.
+    char buffer[sizeof(*x)];
+    int32_t* reg_buffer = reinterpret_cast<int32_t*>(buffer);
+
+    // Registers a0 and a1 -> x.
+    reg_buffer[0] = get_register(a0);
+    reg_buffer[1] = get_register(a1);
+    memcpy(x, buffer, sizeof(buffer));
+
+    // Registers a2 and a3 -> y.
+    reg_buffer[0] = get_register(a2);
+    reg_buffer[1] = get_register(a3);
+    memcpy(y, buffer, sizeof(buffer));
+  }
+}
+
+
+// For use in calls that take one double value, constructed either
+// from a0 and a1 or f12.
+void Simulator::GetFpArgs(double* x) {
+  if (!IsMipsSoftFloatABI) {
+    *x = get_fpu_register_double(12);
+  } else {
+    // We use a char buffer to get around the strict-aliasing rules which
+    // otherwise allow the compiler to optimize away the copy.
+    char buffer[sizeof(*x)];
+    int32_t* reg_buffer = reinterpret_cast<int32_t*>(buffer);
+    // Registers a0 and a1 -> x.
+    reg_buffer[0] = get_register(a0);
+    reg_buffer[1] = get_register(a1);
+    memcpy(x, buffer, sizeof(buffer));
+  }
+}
+
+
+// For use in calls that take one double value constructed either
+// from a0 and a1 or f12 and one integer value.
+void Simulator::GetFpArgs(double* x, int32_t* y) {
+  if (!IsMipsSoftFloatABI) {
+    *x = get_fpu_register_double(12);
+    *y = get_register(a2);
+  } else {
+    // We use a char buffer to get around the strict-aliasing rules which
+    // otherwise allow the compiler to optimize away the copy.
+    char buffer[sizeof(*x)];
+    int32_t* reg_buffer = reinterpret_cast<int32_t*>(buffer);
+    // Registers 0 and 1 -> x.
+    reg_buffer[0] = get_register(a0);
+    reg_buffer[1] = get_register(a1);
+    memcpy(x, buffer, sizeof(buffer));
+
+    // Register 2 -> y.
+    reg_buffer[0] = get_register(a2);
+    memcpy(y, buffer, sizeof(*y));
+  }
+}
+
+
+// The return value is either in v0/v1 or f0.
+void Simulator::SetFpResult(const double& result) {
+  if (!IsMipsSoftFloatABI) {
+    set_fpu_register_double(0, result);
+  } else {
+    char buffer[2 * sizeof(registers_[0])];
+    int32_t* reg_buffer = reinterpret_cast<int32_t*>(buffer);
+    memcpy(buffer, &result, sizeof(buffer));
+    // Copy result to v0 and v1.
+    set_register(v0, reg_buffer[0]);
+    set_register(v1, reg_buffer[1]);
+  }
+}
+
+
+// Helper functions for setting and testing the FCSR register's bits.
+void Simulator::set_fcsr_bit(uint32_t cc, bool value) {
+  if (value) {
+    FCSR_ |= (1 << cc);
+  } else {
+    FCSR_ &= ~(1 << cc);
+  }
+}
+
+
+bool Simulator::test_fcsr_bit(uint32_t cc) {
+  return FCSR_ & (1 << cc);
+}
+
+
+// Sets the rounding error codes in FCSR based on the result of the rounding.
+// Returns true if the operation was invalid.
+bool Simulator::set_fcsr_round_error(double original, double rounded) {
+  if (!isfinite(original) ||
+      rounded > LONG_MAX ||
+      rounded < LONG_MIN) {
+    set_fcsr_bit(6, true);  // Invalid operation.
+    return true;
+  } else if (original != static_cast<double>(rounded)) {
+    set_fcsr_bit(2, true);  // Inexact.
+  }
+  return false;
+}
+
+
+// Raw access to the PC register.
+void Simulator::set_pc(int32_t value) {
+  pc_modified_ = true;
+  registers_[pc] = value;
+}
+
+
+bool Simulator::has_bad_pc() const {
+  return ((registers_[pc] == bad_ra) || (registers_[pc] == end_sim_pc));
+}
+
+
+// Raw access to the PC register without the special adjustment when reading.
+int32_t Simulator::get_pc() const {
+  return registers_[pc];
+}
+
+
+// The MIPS cannot do unaligned reads and writes.  On some MIPS platforms an
+// interrupt is caused.  On others it does a funky rotation thing.  For now we
+// simply disallow unaligned reads, but at some point we may want to move to
+// emulating the rotate behaviour.  Note that simulator runs have the runtime
+// system running directly on the host system and only generated code is
+// executed in the simulator.  Since the host is typically IA32 we will not
+// get the correct MIPS-like behaviour on unaligned accesses.
+
+int Simulator::ReadW(int32_t addr, Instruction* instr) {
+  if (addr >=0 && addr < 0x400) {
+    // This has to be a NULL-dereference, drop into debugger.
+    MipsDebugger dbg(this);
+    dbg.Debug();
+  }
+  if ((addr & kPointerAlignmentMask) == 0) {
+    intptr_t* ptr = reinterpret_cast<intptr_t*>(addr);
+    return *ptr;
+  }
+  PrintF("Unaligned read at 0x%08x, pc=0x%08" V8PRIxPTR "\n",
+         addr,
+         reinterpret_cast<intptr_t>(instr));
+  MipsDebugger dbg(this);
+  dbg.Debug();
+  return 0;
+}
+
+
+void Simulator::WriteW(int32_t addr, int value, Instruction* instr) {
+  if (addr >= 0 && addr < 0x400) {
+    // This has to be a NULL-dereference, drop into debugger.
+    MipsDebugger dbg(this);
+    dbg.Debug();
+  }
+  if ((addr & kPointerAlignmentMask) == 0) {
+    intptr_t* ptr = reinterpret_cast<intptr_t*>(addr);
+    *ptr = value;
+    return;
+  }
+  PrintF("Unaligned write at 0x%08x, pc=0x%08" V8PRIxPTR "\n",
+         addr,
+         reinterpret_cast<intptr_t>(instr));
+  MipsDebugger dbg(this);
+  dbg.Debug();
+}
+
+
+double Simulator::ReadD(int32_t addr, Instruction* instr) {
+  if ((addr & kDoubleAlignmentMask) == 0) {
+    double* ptr = reinterpret_cast<double*>(addr);
+    return *ptr;
+  }
+  PrintF("Unaligned (double) read at 0x%08x, pc=0x%08" V8PRIxPTR "\n",
+         addr,
+         reinterpret_cast<intptr_t>(instr));
+  OS::Abort();
+  return 0;
+}
+
+
+void Simulator::WriteD(int32_t addr, double value, Instruction* instr) {
+  if ((addr & kDoubleAlignmentMask) == 0) {
+    double* ptr = reinterpret_cast<double*>(addr);
+    *ptr = value;
+    return;
+  }
+  PrintF("Unaligned (double) write at 0x%08x, pc=0x%08" V8PRIxPTR "\n",
+         addr,
+         reinterpret_cast<intptr_t>(instr));
+  OS::Abort();
+}
+
+
+uint16_t Simulator::ReadHU(int32_t addr, Instruction* instr) {
+  if ((addr & 1) == 0) {
+    uint16_t* ptr = reinterpret_cast<uint16_t*>(addr);
+    return *ptr;
+  }
+  PrintF("Unaligned unsigned halfword read at 0x%08x, pc=0x%08" V8PRIxPTR "\n",
+         addr,
+         reinterpret_cast<intptr_t>(instr));
+  OS::Abort();
+  return 0;
+}
+
+
+int16_t Simulator::ReadH(int32_t addr, Instruction* instr) {
+  if ((addr & 1) == 0) {
+    int16_t* ptr = reinterpret_cast<int16_t*>(addr);
+    return *ptr;
+  }
+  PrintF("Unaligned signed halfword read at 0x%08x, pc=0x%08" V8PRIxPTR "\n",
+         addr,
+         reinterpret_cast<intptr_t>(instr));
+  OS::Abort();
+  return 0;
+}
+
+
+void Simulator::WriteH(int32_t addr, uint16_t value, Instruction* instr) {
+  if ((addr & 1) == 0) {
+    uint16_t* ptr = reinterpret_cast<uint16_t*>(addr);
+    *ptr = value;
+    return;
+  }
+  PrintF("Unaligned unsigned halfword write at 0x%08x, pc=0x%08" V8PRIxPTR "\n",
+         addr,
+         reinterpret_cast<intptr_t>(instr));
+  OS::Abort();
+}
+
+
+void Simulator::WriteH(int32_t addr, int16_t value, Instruction* instr) {
+  if ((addr & 1) == 0) {
+    int16_t* ptr = reinterpret_cast<int16_t*>(addr);
+    *ptr = value;
+    return;
+  }
+  PrintF("Unaligned halfword write at 0x%08x, pc=0x%08" V8PRIxPTR "\n",
+         addr,
+         reinterpret_cast<intptr_t>(instr));
+  OS::Abort();
+}
+
+
+uint32_t Simulator::ReadBU(int32_t addr) {
+  uint8_t* ptr = reinterpret_cast<uint8_t*>(addr);
+  return *ptr & 0xff;
+}
+
+
+int32_t Simulator::ReadB(int32_t addr) {
+  int8_t* ptr = reinterpret_cast<int8_t*>(addr);
+  return *ptr;
+}
+
+
+void Simulator::WriteB(int32_t addr, uint8_t value) {
+  uint8_t* ptr = reinterpret_cast<uint8_t*>(addr);
+  *ptr = value;
+}
+
+
+void Simulator::WriteB(int32_t addr, int8_t value) {
+  int8_t* ptr = reinterpret_cast<int8_t*>(addr);
+  *ptr = value;
+}
+
+
+// Returns the limit of the stack area to enable checking for stack overflows.
+uintptr_t Simulator::StackLimit() const {
+  // Leave a safety margin of 256 bytes to prevent overrunning the stack when
+  // pushing values.
+  return reinterpret_cast<uintptr_t>(stack_) + 256;
+}
+
+
+// Unsupported instructions use Format to print an error and stop execution.
+void Simulator::Format(Instruction* instr, const char* format) {
+  PrintF("Simulator found unsupported instruction:\n 0x%08x: %s\n",
+         reinterpret_cast<intptr_t>(instr), format);
+  UNIMPLEMENTED_MIPS();
+}
+
+
+// Calls into the V8 runtime are based on this very simple interface.
+// Note: To be able to return two values from some calls the code in runtime.cc
+// uses the ObjectPair which is essentially two 32-bit values stuffed into a
+// 64-bit value. With the code below we assume that all runtime calls return
+// 64 bits of result. If they don't, the v1 result register contains a bogus
+// value, which is fine because it is caller-saved.
+typedef int64_t (*SimulatorRuntimeCall)(int32_t arg0,
+                                        int32_t arg1,
+                                        int32_t arg2,
+                                        int32_t arg3,
+                                        int32_t arg4,
+                                        int32_t arg5);
+typedef double (*SimulatorRuntimeFPCall)(int32_t arg0,
+                                         int32_t arg1,
+                                         int32_t arg2,
+                                         int32_t arg3);
+
+// This signature supports direct call in to API function native callback
+// (refer to InvocationCallback in v8.h).
+typedef v8::Handle<v8::Value> (*SimulatorRuntimeDirectApiCall)(int32_t arg0);
+
+// This signature supports direct call to accessor getter callback.
+typedef v8::Handle<v8::Value> (*SimulatorRuntimeDirectGetterCall)(int32_t arg0,
+                                                                  int32_t arg1);
+
+// Software interrupt instructions are used by the simulator to call into the
+// C-based V8 runtime. They are also used for debugging with simulator.
+void Simulator::SoftwareInterrupt(Instruction* instr) {
+  // There are several instructions that could get us here,
+  // the break_ instruction, or several variants of traps. All
+  // Are "SPECIAL" class opcode, and are distinuished by function.
+  int32_t func = instr->FunctionFieldRaw();
+  int32_t code = (func == BREAK) ? instr->Bits(25, 6) : -1;
+
+  // We first check if we met a call_rt_redirected.
+  if (instr->InstructionBits() == rtCallRedirInstr) {
+    Redirection* redirection = Redirection::FromSwiInstruction(instr);
+    int32_t arg0 = get_register(a0);
+    int32_t arg1 = get_register(a1);
+    int32_t arg2 = get_register(a2);
+    int32_t arg3 = get_register(a3);
+    int32_t arg4 = 0;
+    int32_t arg5 = 0;
+
+    // Need to check if sp is valid before assigning arg4, arg5.
+    // This is a fix for cctest test-api/CatchStackOverflow which causes
+    // the stack to overflow. For some reason arm doesn't need this
+    // stack check here.
+    int32_t* stack_pointer = reinterpret_cast<int32_t*>(get_register(sp));
+    int32_t* stack = reinterpret_cast<int32_t*>(stack_);
+    if (stack_pointer >= stack && stack_pointer < stack + stack_size_ - 5) {
+      // Args 4 and 5 are on the stack after the reserved space for args 0..3.
+      arg4 = stack_pointer[4];
+      arg5 = stack_pointer[5];
+    }
+
+    bool fp_call =
+         (redirection->type() == ExternalReference::BUILTIN_FP_FP_CALL) ||
+         (redirection->type() == ExternalReference::BUILTIN_COMPARE_CALL) ||
+         (redirection->type() == ExternalReference::BUILTIN_FP_CALL) ||
+         (redirection->type() == ExternalReference::BUILTIN_FP_INT_CALL);
+
+    if (!IsMipsSoftFloatABI) {
+      // With the hard floating point calling convention, double
+      // arguments are passed in FPU registers. Fetch the arguments
+      // from there and call the builtin using soft floating point
+      // convention.
+      switch (redirection->type()) {
+      case ExternalReference::BUILTIN_FP_FP_CALL:
+      case ExternalReference::BUILTIN_COMPARE_CALL:
+        arg0 = get_fpu_register(f12);
+        arg1 = get_fpu_register(f13);
+        arg2 = get_fpu_register(f14);
+        arg3 = get_fpu_register(f15);
+        break;
+      case ExternalReference::BUILTIN_FP_CALL:
+        arg0 = get_fpu_register(f12);
+        arg1 = get_fpu_register(f13);
+        break;
+      case ExternalReference::BUILTIN_FP_INT_CALL:
+        arg0 = get_fpu_register(f12);
+        arg1 = get_fpu_register(f13);
+        arg2 = get_register(a2);
+        break;
+      default:
+        break;
+      }
+    }
+
+    // This is dodgy but it works because the C entry stubs are never moved.
+    // See comment in codegen-arm.cc and bug 1242173.
+    int32_t saved_ra = get_register(ra);
+
+    intptr_t external =
+          reinterpret_cast<intptr_t>(redirection->external_function());
+
+    // Based on CpuFeatures::IsSupported(FPU), Mips will use either hardware
+    // FPU, or gcc soft-float routines. Hardware FPU is simulated in this
+    // simulator. Soft-float has additional abstraction of ExternalReference,
+    // to support serialization.
+    if (fp_call) {
+      SimulatorRuntimeFPCall target =
+                  reinterpret_cast<SimulatorRuntimeFPCall>(external);
+      if (::v8::internal::FLAG_trace_sim) {
+        double dval0, dval1;
+        int32_t ival;
+        switch (redirection->type()) {
+          case ExternalReference::BUILTIN_FP_FP_CALL:
+          case ExternalReference::BUILTIN_COMPARE_CALL:
+            GetFpArgs(&dval0, &dval1);
+            PrintF("Call to host function at %p with args %f, %f",
+                FUNCTION_ADDR(target), dval0, dval1);
+            break;
+          case ExternalReference::BUILTIN_FP_CALL:
+            GetFpArgs(&dval0);
+            PrintF("Call to host function at %p with arg %f",
+                FUNCTION_ADDR(target), dval1);
+            break;
+          case ExternalReference::BUILTIN_FP_INT_CALL:
+            GetFpArgs(&dval0, &ival);
+            PrintF("Call to host function at %p with args %f, %d",
+                FUNCTION_ADDR(target), dval0, ival);
+            break;
+          default:
+            UNREACHABLE();
+            break;
+        }
+      }
+      double result = target(arg0, arg1, arg2, arg3);
+      if (redirection->type() != ExternalReference::BUILTIN_COMPARE_CALL) {
+          SetFpResult(result);
+      } else {
+        int32_t gpreg_pair[2];
+        memcpy(&gpreg_pair[0], &result, 2 * sizeof(int32_t));
+        set_register(v0, gpreg_pair[0]);
+        set_register(v1, gpreg_pair[1]);
+      }
+    } else if (redirection->type() == ExternalReference::DIRECT_API_CALL) {
+      // See DirectCEntryStub::GenerateCall for explanation of register usage.
+      SimulatorRuntimeDirectApiCall target =
+                  reinterpret_cast<SimulatorRuntimeDirectApiCall>(external);
+      if (::v8::internal::FLAG_trace_sim) {
+        PrintF("Call to host function at %p args %08x\n",
+               FUNCTION_ADDR(target), arg1);
+      }
+      v8::Handle<v8::Value> result = target(arg1);
+      *(reinterpret_cast<int*>(arg0)) = (int32_t) *result;
+      set_register(v0, arg0);
+    } else if (redirection->type() == ExternalReference::DIRECT_GETTER_CALL) {
+      // See DirectCEntryStub::GenerateCall for explanation of register usage.
+      SimulatorRuntimeDirectGetterCall target =
+                  reinterpret_cast<SimulatorRuntimeDirectGetterCall>(external);
+      if (::v8::internal::FLAG_trace_sim) {
+        PrintF("Call to host function at %p args %08x %08x\n",
+               FUNCTION_ADDR(target), arg1, arg2);
+      }
+      v8::Handle<v8::Value> result = target(arg1, arg2);
+      *(reinterpret_cast<int*>(arg0)) = (int32_t) *result;
+      set_register(v0, arg0);
+    } else {
+      SimulatorRuntimeCall target =
+                  reinterpret_cast<SimulatorRuntimeCall>(external);
+      if (::v8::internal::FLAG_trace_sim) {
+        PrintF(
+            "Call to host function at %p "
+            "args %08x, %08x, %08x, %08x, %08x, %08x\n",
+            FUNCTION_ADDR(target),
+            arg0,
+            arg1,
+            arg2,
+            arg3,
+            arg4,
+            arg5);
+      }
+      int64_t result = target(arg0, arg1, arg2, arg3, arg4, arg5);
+      set_register(v0, static_cast<int32_t>(result));
+      set_register(v1, static_cast<int32_t>(result >> 32));
+    }
+    if (::v8::internal::FLAG_trace_sim) {
+      PrintF("Returned %08x : %08x\n", get_register(v1), get_register(v0));
+    }
+    set_register(ra, saved_ra);
+    set_pc(get_register(ra));
+
+  } else if (func == BREAK && code >= 0 && code < 32) {
+    // First 32 break_ codes interpreted as debug-markers/watchpoints.
+    MipsDebugger dbg(this);
+    ++break_count_;
+    PrintF("\n---- break %d marker: %3d  (instr count: %8d) ----------"
+           "----------------------------------",
+           code, break_count_, icount_);
+    dbg.PrintAllRegs();  // Print registers and continue running.
+  } else {
+    // All remaining break_ codes, and all traps are handled here.
+    MipsDebugger dbg(this);
+    dbg.Debug();
+  }
+}
+
+
+void Simulator::SignalExceptions() {
+  for (int i = 1; i < kNumExceptions; i++) {
+    if (exceptions[i] != 0) {
+      V8_Fatal(__FILE__, __LINE__, "Error: Exception %i raised.", i);
+    }
+  }
+}
+
+
+// Handle execution based on instruction types.
+
+void Simulator::ConfigureTypeRegister(Instruction* instr,
+                                      int32_t& alu_out,
+                                      int64_t& i64hilo,
+                                      uint64_t& u64hilo,
+                                      int32_t& next_pc,
+                                      bool& do_interrupt) {
+  // Every local variable declared here needs to be const.
+  // This is to make sure that changed values are sent back to
+  // DecodeTypeRegister correctly.
+
+  // Instruction fields.
+  const Opcode   op     = instr->OpcodeFieldRaw();
+  const int32_t  rs_reg = instr->RsValue();
+  const int32_t  rs     = get_register(rs_reg);
+  const uint32_t rs_u   = static_cast<uint32_t>(rs);
+  const int32_t  rt_reg = instr->RtValue();
+  const int32_t  rt     = get_register(rt_reg);
+  const uint32_t rt_u   = static_cast<uint32_t>(rt);
+  const int32_t  rd_reg = instr->RdValue();
+  const uint32_t sa     = instr->SaValue();
+
+  const int32_t  fs_reg = instr->FsValue();
+
+
+  // ---------- Configuration.
+  switch (op) {
+    case COP1:    // Coprocessor instructions.
+      switch (instr->RsFieldRaw()) {
+        case BC1:   // Handled in DecodeTypeImmed, should never come here.
+          UNREACHABLE();
+          break;
+        case CFC1:
+          // At the moment only FCSR is supported.
+          ASSERT(fs_reg == kFCSRRegister);
+          alu_out = FCSR_;
+          break;
+        case MFC1:
+          alu_out = get_fpu_register(fs_reg);
+          break;
+        case MFHC1:
+          UNIMPLEMENTED_MIPS();
+          break;
+        case CTC1:
+        case MTC1:
+        case MTHC1:
+          // Do the store in the execution step.
+          break;
+        case S:
+        case D:
+        case W:
+        case L:
+        case PS:
+          // Do everything in the execution step.
+          break;
+        default:
+          UNIMPLEMENTED_MIPS();
+      };
+      break;
+    case SPECIAL:
+      switch (instr->FunctionFieldRaw()) {
+        case JR:
+        case JALR:
+          next_pc = get_register(instr->RsValue());
+          break;
+        case SLL:
+          alu_out = rt << sa;
+          break;
+        case SRL:
+          if (rs_reg == 0) {
+            // Regular logical right shift of a word by a fixed number of
+            // bits instruction. RS field is always equal to 0.
+            alu_out = rt_u >> sa;
+          } else {
+            // Logical right-rotate of a word by a fixed number of bits. This
+            // is special case of SRL instruction, added in MIPS32 Release 2.
+            // RS field is equal to 00001.
+            alu_out = (rt_u >> sa) | (rt_u << (32 - sa));
+          }
+          break;
+        case SRA:
+          alu_out = rt >> sa;
+          break;
+        case SLLV:
+          alu_out = rt << rs;
+          break;
+        case SRLV:
+          if (sa == 0) {
+            // Regular logical right-shift of a word by a variable number of
+            // bits instruction. SA field is always equal to 0.
+            alu_out = rt_u >> rs;
+          } else {
+            // Logical right-rotate of a word by a variable number of bits.
+            // This is special case od SRLV instruction, added in MIPS32
+            // Release 2. SA field is equal to 00001.
+            alu_out = (rt_u >> rs_u) | (rt_u << (32 - rs_u));
+          }
+          break;
+        case SRAV:
+          alu_out = rt >> rs;
+          break;
+        case MFHI:
+          alu_out = get_register(HI);
+          break;
+        case MFLO:
+          alu_out = get_register(LO);
+          break;
+        case MULT:
+          i64hilo = static_cast<int64_t>(rs) * static_cast<int64_t>(rt);
+          break;
+        case MULTU:
+          u64hilo = static_cast<uint64_t>(rs_u) * static_cast<uint64_t>(rt_u);
+          break;
+        case ADD:
+          if (HaveSameSign(rs, rt)) {
+            if (rs > 0) {
+              exceptions[kIntegerOverflow] = rs > (Registers::kMaxValue - rt);
+            } else if (rs < 0) {
+              exceptions[kIntegerUnderflow] = rs < (Registers::kMinValue - rt);
+            }
+          }
+          alu_out = rs + rt;
+          break;
+        case ADDU:
+          alu_out = rs + rt;
+          break;
+        case SUB:
+          if (!HaveSameSign(rs, rt)) {
+            if (rs > 0) {
+              exceptions[kIntegerOverflow] = rs > (Registers::kMaxValue + rt);
+            } else if (rs < 0) {
+              exceptions[kIntegerUnderflow] = rs < (Registers::kMinValue + rt);
+            }
+          }
+          alu_out = rs - rt;
+          break;
+        case SUBU:
+          alu_out = rs - rt;
+          break;
+        case AND:
+          alu_out = rs & rt;
+          break;
+        case OR:
+          alu_out = rs | rt;
+          break;
+        case XOR:
+          alu_out = rs ^ rt;
+          break;
+        case NOR:
+          alu_out = ~(rs | rt);
+          break;
+        case SLT:
+          alu_out = rs < rt ? 1 : 0;
+          break;
+        case SLTU:
+          alu_out = rs_u < rt_u ? 1 : 0;
+          break;
+        // Break and trap instructions.
+        case BREAK:
+
+          do_interrupt = true;
+          break;
+        case TGE:
+          do_interrupt = rs >= rt;
+          break;
+        case TGEU:
+          do_interrupt = rs_u >= rt_u;
+          break;
+        case TLT:
+          do_interrupt = rs < rt;
+          break;
+        case TLTU:
+          do_interrupt = rs_u < rt_u;
+          break;
+        case TEQ:
+          do_interrupt = rs == rt;
+          break;
+        case TNE:
+          do_interrupt = rs != rt;
+          break;
+        case MOVN:
+        case MOVZ:
+        case MOVCI:
+          // No action taken on decode.
+          break;
+        case DIV:
+        case DIVU:
+          // div and divu never raise exceptions.
+          break;
+        default:
+          UNREACHABLE();
+      };
+      break;
+    case SPECIAL2:
+      switch (instr->FunctionFieldRaw()) {
+        case MUL:
+          alu_out = rs_u * rt_u;  // Only the lower 32 bits are kept.
+          break;
+        case CLZ:
+          alu_out = __builtin_clz(rs_u);
+          break;
+        default:
+          UNREACHABLE();
+      };
+      break;
+    case SPECIAL3:
+      switch (instr->FunctionFieldRaw()) {
+        case INS: {   // Mips32r2 instruction.
+          // Interpret rd field as 5-bit msb of insert.
+          uint16_t msb = rd_reg;
+          // Interpret sa field as 5-bit lsb of insert.
+          uint16_t lsb = sa;
+          uint16_t size = msb - lsb + 1;
+          uint32_t mask = (1 << size) - 1;
+          alu_out = (rt_u & ~(mask << lsb)) | ((rs_u & mask) << lsb);
+          break;
+        }
+        case EXT: {   // Mips32r2 instruction.
+          // Interpret rd field as 5-bit msb of extract.
+          uint16_t msb = rd_reg;
+          // Interpret sa field as 5-bit lsb of extract.
+          uint16_t lsb = sa;
+          uint16_t size = msb + 1;
+          uint32_t mask = (1 << size) - 1;
+          alu_out = (rs_u & (mask << lsb)) >> lsb;
+          break;
+        }
+        default:
+          UNREACHABLE();
+      };
+      break;
+    default:
+      UNREACHABLE();
+  };
+}
+
+
+void Simulator::DecodeTypeRegister(Instruction* instr) {
+  // Instruction fields.
+  const Opcode   op     = instr->OpcodeFieldRaw();
+  const int32_t  rs_reg = instr->RsValue();
+  const int32_t  rs     = get_register(rs_reg);
+  const uint32_t rs_u   = static_cast<uint32_t>(rs);
+  const int32_t  rt_reg = instr->RtValue();
+  const int32_t  rt     = get_register(rt_reg);
+  const uint32_t rt_u   = static_cast<uint32_t>(rt);
+  const int32_t  rd_reg = instr->RdValue();
+
+  const int32_t  fs_reg = instr->FsValue();
+  const int32_t  ft_reg = instr->FtValue();
+  const int32_t  fd_reg = instr->FdValue();
+  int64_t  i64hilo = 0;
+  uint64_t u64hilo = 0;
+
+  // ALU output.
+  // It should not be used as is. Instructions using it should always
+  // initialize it first.
+  int32_t alu_out = 0x12345678;
+
+  // For break and trap instructions.
+  bool do_interrupt = false;
+
+  // For jr and jalr.
+  // Get current pc.
+  int32_t current_pc = get_pc();
+  // Next pc
+  int32_t next_pc = 0;
+
+  // Setup the variables if needed before executing the instruction.
+  ConfigureTypeRegister(instr,
+                        alu_out,
+                        i64hilo,
+                        u64hilo,
+                        next_pc,
+                        do_interrupt);
+
+  // ---------- Raise exceptions triggered.
+  SignalExceptions();
+
+  // ---------- Execution.
+  switch (op) {
+    case COP1:
+      switch (instr->RsFieldRaw()) {
+        case BC1:   // Branch on coprocessor condition.
+          UNREACHABLE();
+          break;
+        case CFC1:
+          set_register(rt_reg, alu_out);
+        case MFC1:
+          set_register(rt_reg, alu_out);
+          break;
+        case MFHC1:
+          UNIMPLEMENTED_MIPS();
+          break;
+        case CTC1:
+          // At the moment only FCSR is supported.
+          ASSERT(fs_reg == kFCSRRegister);
+          FCSR_ = registers_[rt_reg];
+          break;
+        case MTC1:
+          FPUregisters_[fs_reg] = registers_[rt_reg];
+          break;
+        case MTHC1:
+          UNIMPLEMENTED_MIPS();
+          break;
+        case S:
+          float f;
+          switch (instr->FunctionFieldRaw()) {
+            case CVT_D_S:
+              f = get_fpu_register_float(fs_reg);
+              set_fpu_register_double(fd_reg, static_cast<double>(f));
+              break;
+            case CVT_W_S:
+            case CVT_L_S:
+            case TRUNC_W_S:
+            case TRUNC_L_S:
+            case ROUND_W_S:
+            case ROUND_L_S:
+            case FLOOR_W_S:
+            case FLOOR_L_S:
+            case CEIL_W_S:
+            case CEIL_L_S:
+            case CVT_PS_S:
+              UNIMPLEMENTED_MIPS();
+              break;
+            default:
+              UNREACHABLE();
+          }
+          break;
+        case D:
+          double ft, fs;
+          uint32_t cc, fcsr_cc;
+          int64_t  i64;
+          fs = get_fpu_register_double(fs_reg);
+          ft = get_fpu_register_double(ft_reg);
+          cc = instr->FCccValue();
+          fcsr_cc = get_fcsr_condition_bit(cc);
+          switch (instr->FunctionFieldRaw()) {
+            case ADD_D:
+              set_fpu_register_double(fd_reg, fs + ft);
+              break;
+            case SUB_D:
+              set_fpu_register_double(fd_reg, fs - ft);
+              break;
+            case MUL_D:
+              set_fpu_register_double(fd_reg, fs * ft);
+              break;
+            case DIV_D:
+              set_fpu_register_double(fd_reg, fs / ft);
+              break;
+            case ABS_D:
+              set_fpu_register_double(fd_reg, fs < 0 ? -fs : fs);
+              break;
+            case MOV_D:
+              set_fpu_register_double(fd_reg, fs);
+              break;
+            case NEG_D:
+              set_fpu_register_double(fd_reg, -fs);
+              break;
+            case SQRT_D:
+              set_fpu_register_double(fd_reg, sqrt(fs));
+              break;
+            case C_UN_D:
+              set_fcsr_bit(fcsr_cc, isnan(fs) || isnan(ft));
+              break;
+            case C_EQ_D:
+              set_fcsr_bit(fcsr_cc, (fs == ft));
+              break;
+            case C_UEQ_D:
+              set_fcsr_bit(fcsr_cc, (fs == ft) || (isnan(fs) || isnan(ft)));
+              break;
+            case C_OLT_D:
+              set_fcsr_bit(fcsr_cc, (fs < ft));
+              break;
+            case C_ULT_D:
+              set_fcsr_bit(fcsr_cc, (fs < ft) || (isnan(fs) || isnan(ft)));
+              break;
+            case C_OLE_D:
+              set_fcsr_bit(fcsr_cc, (fs <= ft));
+              break;
+            case C_ULE_D:
+              set_fcsr_bit(fcsr_cc, (fs <= ft) || (isnan(fs) || isnan(ft)));
+              break;
+            case CVT_W_D:   // Convert double to word.
+              // Rounding modes are not yet supported.
+              ASSERT((FCSR_ & 3) == 0);
+              // In rounding mode 0 it should behave like ROUND.
+            case ROUND_W_D:  // Round double to word.
+              {
+                double rounded = fs > 0 ? floor(fs + 0.5) : ceil(fs - 0.5);
+                int32_t result = static_cast<int32_t>(rounded);
+                set_fpu_register(fd_reg, result);
+                if (set_fcsr_round_error(fs, rounded)) {
+                  set_fpu_register(fd_reg, kFPUInvalidResult);
+                }
+              }
+              break;
+            case TRUNC_W_D:  // Truncate double to word (round towards 0).
+              {
+                int32_t result = static_cast<int32_t>(fs);
+                set_fpu_register(fd_reg, result);
+                if (set_fcsr_round_error(fs, static_cast<double>(result))) {
+                  set_fpu_register(fd_reg, kFPUInvalidResult);
+                }
+              }
+              break;
+            case FLOOR_W_D:  // Round double to word towards negative infinity.
+              {
+                double rounded = floor(fs);
+                int32_t result = static_cast<int32_t>(rounded);
+                set_fpu_register(fd_reg, result);
+                if (set_fcsr_round_error(fs, rounded)) {
+                  set_fpu_register(fd_reg, kFPUInvalidResult);
+                }
+              }
+              break;
+            case CEIL_W_D:  // Round double to word towards positive infinity.
+              {
+                double rounded = ceil(fs);
+                int32_t result = static_cast<int32_t>(rounded);
+                set_fpu_register(fd_reg, result);
+                if (set_fcsr_round_error(fs, rounded)) {
+                  set_fpu_register(fd_reg, kFPUInvalidResult);
+                }
+              }
+              break;
+            case CVT_S_D:  // Convert double to float (single).
+              set_fpu_register_float(fd_reg, static_cast<float>(fs));
+              break;
+            case CVT_L_D:  // Mips32r2: Truncate double to 64-bit long-word.
+              i64 = static_cast<int64_t>(fs);
+              set_fpu_register(fd_reg, i64 & 0xffffffff);
+              set_fpu_register(fd_reg + 1, i64 >> 32);
+              break;
+            case TRUNC_L_D:  // Mips32r2 instruction.
+              i64 = static_cast<int64_t>(fs);
+              set_fpu_register(fd_reg, i64 & 0xffffffff);
+              set_fpu_register(fd_reg + 1, i64 >> 32);
+              break;
+            case ROUND_L_D: {  // Mips32r2 instruction.
+              double rounded = fs > 0 ? floor(fs + 0.5) : ceil(fs - 0.5);
+              i64 = static_cast<int64_t>(rounded);
+              set_fpu_register(fd_reg, i64 & 0xffffffff);
+              set_fpu_register(fd_reg + 1, i64 >> 32);
+              break;
+            }
+            case FLOOR_L_D:  // Mips32r2 instruction.
+              i64 = static_cast<int64_t>(floor(fs));
+              set_fpu_register(fd_reg, i64 & 0xffffffff);
+              set_fpu_register(fd_reg + 1, i64 >> 32);
+              break;
+            case CEIL_L_D:  // Mips32r2 instruction.
+              i64 = static_cast<int64_t>(ceil(fs));
+              set_fpu_register(fd_reg, i64 & 0xffffffff);
+              set_fpu_register(fd_reg + 1, i64 >> 32);
+              break;
+            case C_F_D:
+              UNIMPLEMENTED_MIPS();
+              break;
+            default:
+              UNREACHABLE();
+          }
+          break;
+        case W:
+          switch (instr->FunctionFieldRaw()) {
+            case CVT_S_W:   // Convert word to float (single).
+              alu_out = get_fpu_register(fs_reg);
+              set_fpu_register_float(fd_reg, static_cast<float>(alu_out));
+              break;
+            case CVT_D_W:   // Convert word to double.
+              alu_out = get_fpu_register(fs_reg);
+              set_fpu_register_double(fd_reg, static_cast<double>(alu_out));
+              break;
+            default:
+              UNREACHABLE();
+          };
+          break;
+        case L:
+          switch (instr->FunctionFieldRaw()) {
+          case CVT_D_L:  // Mips32r2 instruction.
+            // Watch the signs here, we want 2 32-bit vals
+            // to make a sign-64.
+            i64 = (uint32_t) get_fpu_register(fs_reg);
+            i64 |= ((int64_t) get_fpu_register(fs_reg + 1) << 32);
+            set_fpu_register_double(fd_reg, static_cast<double>(i64));
+            break;
+            case CVT_S_L:
+              UNIMPLEMENTED_MIPS();
+              break;
+            default:
+              UNREACHABLE();
+          }
+          break;
+        case PS:
+          break;
+        default:
+          UNREACHABLE();
+      };
+      break;
+    case SPECIAL:
+      switch (instr->FunctionFieldRaw()) {
+        case JR: {
+          Instruction* branch_delay_instr = reinterpret_cast<Instruction*>(
+              current_pc+Instruction::kInstrSize);
+          BranchDelayInstructionDecode(branch_delay_instr);
+          set_pc(next_pc);
+          pc_modified_ = true;
+          break;
+        }
+        case JALR: {
+          Instruction* branch_delay_instr = reinterpret_cast<Instruction*>(
+              current_pc+Instruction::kInstrSize);
+          BranchDelayInstructionDecode(branch_delay_instr);
+          set_register(31, current_pc + 2 * Instruction::kInstrSize);
+          set_pc(next_pc);
+          pc_modified_ = true;
+          break;
+        }
+        // Instructions using HI and LO registers.
+        case MULT:
+          set_register(LO, static_cast<int32_t>(i64hilo & 0xffffffff));
+          set_register(HI, static_cast<int32_t>(i64hilo >> 32));
+          break;
+        case MULTU:
+          set_register(LO, static_cast<int32_t>(u64hilo & 0xffffffff));
+          set_register(HI, static_cast<int32_t>(u64hilo >> 32));
+          break;
+        case DIV:
+          // Divide by zero was not checked in the configuration step - div and
+          // divu do not raise exceptions. On division by 0, the result will
+          // be UNPREDICTABLE.
+          if (rt != 0) {
+            set_register(LO, rs / rt);
+            set_register(HI, rs % rt);
+          }
+          break;
+        case DIVU:
+          if (rt_u != 0) {
+            set_register(LO, rs_u / rt_u);
+            set_register(HI, rs_u % rt_u);
+          }
+          break;
+        // Break and trap instructions.
+        case BREAK:
+        case TGE:
+        case TGEU:
+        case TLT:
+        case TLTU:
+        case TEQ:
+        case TNE:
+          if (do_interrupt) {
+            SoftwareInterrupt(instr);
+          }
+          break;
+        // Conditional moves.
+        case MOVN:
+          if (rt) set_register(rd_reg, rs);
+          break;
+        case MOVCI: {
+          uint32_t cc = instr->FBccValue();
+          uint32_t fcsr_cc = get_fcsr_condition_bit(cc);
+          if (instr->Bit(16)) {  // Read Tf bit.
+            if (test_fcsr_bit(fcsr_cc)) set_register(rd_reg, rs);
+          } else {
+            if (!test_fcsr_bit(fcsr_cc)) set_register(rd_reg, rs);
+          }
+          break;
+        }
+        case MOVZ:
+          if (!rt) set_register(rd_reg, rs);
+          break;
+        default:  // For other special opcodes we do the default operation.
+          set_register(rd_reg, alu_out);
+      };
+      break;
+    case SPECIAL2:
+      switch (instr->FunctionFieldRaw()) {
+        case MUL:
+          set_register(rd_reg, alu_out);
+          // HI and LO are UNPREDICTABLE after the operation.
+          set_register(LO, Unpredictable);
+          set_register(HI, Unpredictable);
+          break;
+        default:  // For other special2 opcodes we do the default operation.
+          set_register(rd_reg, alu_out);
+      }
+      break;
+    case SPECIAL3:
+      switch (instr->FunctionFieldRaw()) {
+        case INS:
+          // Ins instr leaves result in Rt, rather than Rd.
+          set_register(rt_reg, alu_out);
+          break;
+        case EXT:
+          // Ext instr leaves result in Rt, rather than Rd.
+          set_register(rt_reg, alu_out);
+          break;
+        default:
+          UNREACHABLE();
+      };
+      break;
+    // Unimplemented opcodes raised an error in the configuration step before,
+    // so we can use the default here to set the destination register in common
+    // cases.
+    default:
+      set_register(rd_reg, alu_out);
+  };
+}
+
+
+// Type 2: instructions using a 16 bytes immediate. (eg: addi, beq).
+void Simulator::DecodeTypeImmediate(Instruction* instr) {
+  // Instruction fields.
+  Opcode   op     = instr->OpcodeFieldRaw();
+  int32_t  rs     = get_register(instr->RsValue());
+  uint32_t rs_u   = static_cast<uint32_t>(rs);
+  int32_t  rt_reg = instr->RtValue();  // Destination register.
+  int32_t  rt     = get_register(rt_reg);
+  int16_t  imm16  = instr->Imm16Value();
+
+  int32_t  ft_reg = instr->FtValue();  // Destination register.
+
+  // Zero extended immediate.
+  uint32_t  oe_imm16 = 0xffff & imm16;
+  // Sign extended immediate.
+  int32_t   se_imm16 = imm16;
+
+  // Get current pc.
+  int32_t current_pc = get_pc();
+  // Next pc.
+  int32_t next_pc = bad_ra;
+
+  // Used for conditional branch instructions.
+  bool do_branch = false;
+  bool execute_branch_delay_instruction = false;
+
+  // Used for arithmetic instructions.
+  int32_t alu_out = 0;
+  // Floating point.
+  double fp_out = 0.0;
+  uint32_t cc, cc_value, fcsr_cc;
+
+  // Used for memory instructions.
+  int32_t addr = 0x0;
+  // Value to be written in memory.
+  uint32_t mem_value = 0x0;
+
+  // ---------- Configuration (and execution for REGIMM).
+  switch (op) {
+    // ------------- COP1. Coprocessor instructions.
+    case COP1:
+      switch (instr->RsFieldRaw()) {
+        case BC1:   // Branch on coprocessor condition.
+          cc = instr->FBccValue();
+          fcsr_cc = get_fcsr_condition_bit(cc);
+          cc_value = test_fcsr_bit(fcsr_cc);
+          do_branch = (instr->FBtrueValue()) ? cc_value : !cc_value;
+          execute_branch_delay_instruction = true;
+          // Set next_pc.
+          if (do_branch) {
+            next_pc = current_pc + (imm16 << 2) + Instruction::kInstrSize;
+          } else {
+            next_pc = current_pc + kBranchReturnOffset;
+          }
+          break;
+        default:
+          UNREACHABLE();
+      };
+      break;
+    // ------------- REGIMM class.
+    case REGIMM:
+      switch (instr->RtFieldRaw()) {
+        case BLTZ:
+          do_branch = (rs  < 0);
+          break;
+        case BLTZAL:
+          do_branch = rs  < 0;
+          break;
+        case BGEZ:
+          do_branch = rs >= 0;
+          break;
+        case BGEZAL:
+          do_branch = rs >= 0;
+          break;
+        default:
+          UNREACHABLE();
+      };
+      switch (instr->RtFieldRaw()) {
+        case BLTZ:
+        case BLTZAL:
+        case BGEZ:
+        case BGEZAL:
+          // Branch instructions common part.
+          execute_branch_delay_instruction = true;
+          // Set next_pc.
+          if (do_branch) {
+            next_pc = current_pc + (imm16 << 2) + Instruction::kInstrSize;
+            if (instr->IsLinkingInstruction()) {
+              set_register(31, current_pc + kBranchReturnOffset);
+            }
+          } else {
+            next_pc = current_pc + kBranchReturnOffset;
+          }
+        default:
+          break;
+        };
+    break;  // case REGIMM.
+    // ------------- Branch instructions.
+    // When comparing to zero, the encoding of rt field is always 0, so we don't
+    // need to replace rt with zero.
+    case BEQ:
+      do_branch = (rs == rt);
+      break;
+    case BNE:
+      do_branch = rs != rt;
+      break;
+    case BLEZ:
+      do_branch = rs <= 0;
+      break;
+    case BGTZ:
+      do_branch = rs  > 0;
+      break;
+    // ------------- Arithmetic instructions.
+    case ADDI:
+      if (HaveSameSign(rs, se_imm16)) {
+        if (rs > 0) {
+          exceptions[kIntegerOverflow] = rs > (Registers::kMaxValue - se_imm16);
+        } else if (rs < 0) {
+          exceptions[kIntegerUnderflow] =
+              rs < (Registers::kMinValue - se_imm16);
+        }
+      }
+      alu_out = rs + se_imm16;
+      break;
+    case ADDIU:
+      alu_out = rs + se_imm16;
+      break;
+    case SLTI:
+      alu_out = (rs < se_imm16) ? 1 : 0;
+      break;
+    case SLTIU:
+      alu_out = (rs_u < static_cast<uint32_t>(se_imm16)) ? 1 : 0;
+      break;
+    case ANDI:
+        alu_out = rs & oe_imm16;
+      break;
+    case ORI:
+        alu_out = rs | oe_imm16;
+      break;
+    case XORI:
+        alu_out = rs ^ oe_imm16;
+      break;
+    case LUI:
+        alu_out = (oe_imm16 << 16);
+      break;
+    // ------------- Memory instructions.
+    case LB:
+      addr = rs + se_imm16;
+      alu_out = ReadB(addr);
+      break;
+    case LH:
+      addr = rs + se_imm16;
+      alu_out = ReadH(addr, instr);
+      break;
+    case LWL: {
+      // al_offset is offset of the effective address within an aligned word.
+      uint8_t al_offset = (rs + se_imm16) & kPointerAlignmentMask;
+      uint8_t byte_shift = kPointerAlignmentMask - al_offset;
+      uint32_t mask = (1 << byte_shift * 8) - 1;
+      addr = rs + se_imm16 - al_offset;
+      alu_out = ReadW(addr, instr);
+      alu_out <<= byte_shift * 8;
+      alu_out |= rt & mask;
+      break;
+    }
+    case LW:
+      addr = rs + se_imm16;
+      alu_out = ReadW(addr, instr);
+      break;
+    case LBU:
+      addr = rs + se_imm16;
+      alu_out = ReadBU(addr);
+      break;
+    case LHU:
+      addr = rs + se_imm16;
+      alu_out = ReadHU(addr, instr);
+      break;
+    case LWR: {
+      // al_offset is offset of the effective address within an aligned word.
+      uint8_t al_offset = (rs + se_imm16) & kPointerAlignmentMask;
+      uint8_t byte_shift = kPointerAlignmentMask - al_offset;
+      uint32_t mask = al_offset ? (~0 << (byte_shift + 1) * 8) : 0;
+      addr = rs + se_imm16 - al_offset;
+      alu_out = ReadW(addr, instr);
+      alu_out = static_cast<uint32_t> (alu_out) >> al_offset * 8;
+      alu_out |= rt & mask;
+      break;
+    }
+    case SB:
+      addr = rs + se_imm16;
+      break;
+    case SH:
+      addr = rs + se_imm16;
+      break;
+    case SWL: {
+      uint8_t al_offset = (rs + se_imm16) & kPointerAlignmentMask;
+      uint8_t byte_shift = kPointerAlignmentMask - al_offset;
+      uint32_t mask = byte_shift ? (~0 << (al_offset + 1) * 8) : 0;
+      addr = rs + se_imm16 - al_offset;
+      mem_value = ReadW(addr, instr) & mask;
+      mem_value |= static_cast<uint32_t>(rt) >> byte_shift * 8;
+      break;
+    }
+    case SW:
+      addr = rs + se_imm16;
+      break;
+    case SWR: {
+      uint8_t al_offset = (rs + se_imm16) & kPointerAlignmentMask;
+      uint32_t mask = (1 << al_offset * 8) - 1;
+      addr = rs + se_imm16 - al_offset;
+      mem_value = ReadW(addr, instr);
+      mem_value = (rt << al_offset * 8) | (mem_value & mask);
+      break;
+    }
+    case LWC1:
+      addr = rs + se_imm16;
+      alu_out = ReadW(addr, instr);
+      break;
+    case LDC1:
+      addr = rs + se_imm16;
+      fp_out = ReadD(addr, instr);
+      break;
+    case SWC1:
+    case SDC1:
+      addr = rs + se_imm16;
+      break;
+    default:
+      UNREACHABLE();
+  };
+
+  // ---------- Raise exceptions triggered.
+  SignalExceptions();
+
+  // ---------- Execution.
+  switch (op) {
+    // ------------- Branch instructions.
+    case BEQ:
+    case BNE:
+    case BLEZ:
+    case BGTZ:
+      // Branch instructions common part.
+      execute_branch_delay_instruction = true;
+      // Set next_pc.
+      if (do_branch) {
+        next_pc = current_pc + (imm16 << 2) + Instruction::kInstrSize;
+        if (instr->IsLinkingInstruction()) {
+          set_register(31, current_pc + 2* Instruction::kInstrSize);
+        }
+      } else {
+        next_pc = current_pc + 2 * Instruction::kInstrSize;
+      }
+      break;
+    // ------------- Arithmetic instructions.
+    case ADDI:
+    case ADDIU:
+    case SLTI:
+    case SLTIU:
+    case ANDI:
+    case ORI:
+    case XORI:
+    case LUI:
+      set_register(rt_reg, alu_out);
+      break;
+    // ------------- Memory instructions.
+    case LB:
+    case LH:
+    case LWL:
+    case LW:
+    case LBU:
+    case LHU:
+    case LWR:
+      set_register(rt_reg, alu_out);
+      break;
+    case SB:
+      WriteB(addr, static_cast<int8_t>(rt));
+      break;
+    case SH:
+      WriteH(addr, static_cast<uint16_t>(rt), instr);
+      break;
+    case SWL:
+      WriteW(addr, mem_value, instr);
+      break;
+    case SW:
+      WriteW(addr, rt, instr);
+      break;
+    case SWR:
+      WriteW(addr, mem_value, instr);
+      break;
+    case LWC1:
+      set_fpu_register(ft_reg, alu_out);
+      break;
+    case LDC1:
+      set_fpu_register_double(ft_reg, fp_out);
+      break;
+    case SWC1:
+      addr = rs + se_imm16;
+      WriteW(addr, get_fpu_register(ft_reg), instr);
+      break;
+    case SDC1:
+      addr = rs + se_imm16;
+      WriteD(addr, get_fpu_register_double(ft_reg), instr);
+      break;
+    default:
+      break;
+  };
+
+
+  if (execute_branch_delay_instruction) {
+    // Execute branch delay slot
+    // We don't check for end_sim_pc. First it should not be met as the current
+    // pc is valid. Secondly a jump should always execute its branch delay slot.
+    Instruction* branch_delay_instr =
+      reinterpret_cast<Instruction*>(current_pc+Instruction::kInstrSize);
+    BranchDelayInstructionDecode(branch_delay_instr);
+  }
+
+  // If needed update pc after the branch delay execution.
+  if (next_pc != bad_ra) {
+    set_pc(next_pc);
+  }
+}
+
+
+// Type 3: instructions using a 26 bytes immediate. (eg: j, jal).
+void Simulator::DecodeTypeJump(Instruction* instr) {
+  // Get current pc.
+  int32_t current_pc = get_pc();
+  // Get unchanged bits of pc.
+  int32_t pc_high_bits = current_pc & 0xf0000000;
+  // Next pc.
+  int32_t next_pc = pc_high_bits | (instr->Imm26Value() << 2);
+
+  // Execute branch delay slot.
+  // We don't check for end_sim_pc. First it should not be met as the current pc
+  // is valid. Secondly a jump should always execute its branch delay slot.
+  Instruction* branch_delay_instr =
+      reinterpret_cast<Instruction*>(current_pc + Instruction::kInstrSize);
+  BranchDelayInstructionDecode(branch_delay_instr);
+
+  // Update pc and ra if necessary.
+  // Do this after the branch delay execution.
+  if (instr->IsLinkingInstruction()) {
+    set_register(31, current_pc + 2 * Instruction::kInstrSize);
+  }
+  set_pc(next_pc);
+  pc_modified_ = true;
+}
+
+
+// Executes the current instruction.
+void Simulator::InstructionDecode(Instruction* instr) {
+  if (v8::internal::FLAG_check_icache) {
+    CheckICache(isolate_->simulator_i_cache(), instr);
+  }
+  pc_modified_ = false;
+  if (::v8::internal::FLAG_trace_sim) {
+    disasm::NameConverter converter;
+    disasm::Disassembler dasm(converter);
+    // Use a reasonably large buffer.
+    v8::internal::EmbeddedVector<char, 256> buffer;
+    dasm.InstructionDecode(buffer, reinterpret_cast<byte*>(instr));
+    PrintF("  0x%08x  %s\n", reinterpret_cast<intptr_t>(instr),
+        buffer.start());
+  }
+
+  switch (instr->InstructionType()) {
+    case Instruction::kRegisterType:
+      DecodeTypeRegister(instr);
+      break;
+    case Instruction::kImmediateType:
+      DecodeTypeImmediate(instr);
+      break;
+    case Instruction::kJumpType:
+      DecodeTypeJump(instr);
+      break;
+    default:
+      UNSUPPORTED();
+  }
+  if (!pc_modified_) {
+    set_register(pc, reinterpret_cast<int32_t>(instr) +
+                 Instruction::kInstrSize);
+  }
+}
+
+
+
+void Simulator::Execute() {
+  // Get the PC to simulate. Cannot use the accessor here as we need the
+  // raw PC value and not the one used as input to arithmetic instructions.
+  int program_counter = get_pc();
+  if (::v8::internal::FLAG_stop_sim_at == 0) {
+    // Fast version of the dispatch loop without checking whether the simulator
+    // should be stopping at a particular executed instruction.
+    while (program_counter != end_sim_pc) {
+      Instruction* instr = reinterpret_cast<Instruction*>(program_counter);
+      icount_++;
+      InstructionDecode(instr);
+      program_counter = get_pc();
+    }
+  } else {
+    // FLAG_stop_sim_at is at the non-default value. Stop in the debugger when
+    // we reach the particular instuction count.
+    while (program_counter != end_sim_pc) {
+      Instruction* instr = reinterpret_cast<Instruction*>(program_counter);
+      icount_++;
+      if (icount_ == ::v8::internal::FLAG_stop_sim_at) {
+        MipsDebugger dbg(this);
+        dbg.Debug();
+      } else {
+        InstructionDecode(instr);
+      }
+      program_counter = get_pc();
+    }
+  }
+}
+
+
+int32_t Simulator::Call(byte* entry, int argument_count, ...) {
+  va_list parameters;
+  va_start(parameters, argument_count);
+  // Setup arguments.
+
+  // First four arguments passed in registers.
+  ASSERT(argument_count >= 4);
+  set_register(a0, va_arg(parameters, int32_t));
+  set_register(a1, va_arg(parameters, int32_t));
+  set_register(a2, va_arg(parameters, int32_t));
+  set_register(a3, va_arg(parameters, int32_t));
+
+  // Remaining arguments passed on stack.
+  int original_stack = get_register(sp);
+  // Compute position of stack on entry to generated code.
+  int entry_stack = (original_stack - (argument_count - 4) * sizeof(int32_t)
+                                    - kCArgsSlotsSize);
+  if (OS::ActivationFrameAlignment() != 0) {
+    entry_stack &= -OS::ActivationFrameAlignment();
+  }
+  // Store remaining arguments on stack, from low to high memory.
+  intptr_t* stack_argument = reinterpret_cast<intptr_t*>(entry_stack);
+  for (int i = 4; i < argument_count; i++) {
+    stack_argument[i - 4 + kArgsSlotsNum] = va_arg(parameters, int32_t);
+  }
+  va_end(parameters);
+  set_register(sp, entry_stack);
+
+  // Prepare to execute the code at entry.
+  set_register(pc, reinterpret_cast<int32_t>(entry));
+  // Put down marker for end of simulation. The simulator will stop simulation
+  // when the PC reaches this value. By saving the "end simulation" value into
+  // the LR the simulation stops when returning to this call point.
+  set_register(ra, end_sim_pc);
+
+  // Remember the values of callee-saved registers.
+  // The code below assumes that r9 is not used as sb (static base) in
+  // simulator code and therefore is regarded as a callee-saved register.
+  int32_t s0_val = get_register(s0);
+  int32_t s1_val = get_register(s1);
+  int32_t s2_val = get_register(s2);
+  int32_t s3_val = get_register(s3);
+  int32_t s4_val = get_register(s4);
+  int32_t s5_val = get_register(s5);
+  int32_t s6_val = get_register(s6);
+  int32_t s7_val = get_register(s7);
+  int32_t gp_val = get_register(gp);
+  int32_t sp_val = get_register(sp);
+  int32_t fp_val = get_register(fp);
+
+  // Setup the callee-saved registers with a known value. To be able to check
+  // that they are preserved properly across JS execution.
+  int32_t callee_saved_value = icount_;
+  set_register(s0, callee_saved_value);
+  set_register(s1, callee_saved_value);
+  set_register(s2, callee_saved_value);
+  set_register(s3, callee_saved_value);
+  set_register(s4, callee_saved_value);
+  set_register(s5, callee_saved_value);
+  set_register(s6, callee_saved_value);
+  set_register(s7, callee_saved_value);
+  set_register(gp, callee_saved_value);
+  set_register(fp, callee_saved_value);
+
+  // Start the simulation.
+  Execute();
+
+  // Check that the callee-saved registers have been preserved.
+  CHECK_EQ(callee_saved_value, get_register(s0));
+  CHECK_EQ(callee_saved_value, get_register(s1));
+  CHECK_EQ(callee_saved_value, get_register(s2));
+  CHECK_EQ(callee_saved_value, get_register(s3));
+  CHECK_EQ(callee_saved_value, get_register(s4));
+  CHECK_EQ(callee_saved_value, get_register(s5));
+  CHECK_EQ(callee_saved_value, get_register(s6));
+  CHECK_EQ(callee_saved_value, get_register(s7));
+  CHECK_EQ(callee_saved_value, get_register(gp));
+  CHECK_EQ(callee_saved_value, get_register(fp));
+
+  // Restore callee-saved registers with the original value.
+  set_register(s0, s0_val);
+  set_register(s1, s1_val);
+  set_register(s2, s2_val);
+  set_register(s3, s3_val);
+  set_register(s4, s4_val);
+  set_register(s5, s5_val);
+  set_register(s6, s6_val);
+  set_register(s7, s7_val);
+  set_register(gp, gp_val);
+  set_register(sp, sp_val);
+  set_register(fp, fp_val);
+
+  // Pop stack passed arguments.
+  CHECK_EQ(entry_stack, get_register(sp));
+  set_register(sp, original_stack);
+
+  int32_t result = get_register(v0);
+  return result;
+}
+
+
+uintptr_t Simulator::PushAddress(uintptr_t address) {
+  int new_sp = get_register(sp) - sizeof(uintptr_t);
+  uintptr_t* stack_slot = reinterpret_cast<uintptr_t*>(new_sp);
+  *stack_slot = address;
+  set_register(sp, new_sp);
+  return new_sp;
+}
+
+
+uintptr_t Simulator::PopAddress() {
+  int current_sp = get_register(sp);
+  uintptr_t* stack_slot = reinterpret_cast<uintptr_t*>(current_sp);
+  uintptr_t address = *stack_slot;
+  set_register(sp, current_sp + sizeof(uintptr_t));
+  return address;
+}
+
+
+#undef UNSUPPORTED
+
+} }  // namespace v8::internal
+
+#endif  // USE_SIMULATOR
+
+#endif  // V8_TARGET_ARCH_MIPS