libv8 3.3.10.2

data/lib/libv8/v8/src/arm/cpu-arm.cc

@@ -0,0 +1,120 @@
+// Copyright 2006-2009 the V8 project authors. All rights reserved.
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+//       notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+//       copyright notice, this list of conditions and the following
+//       disclaimer in the documentation and/or other materials provided
+//       with the distribution.
+//     * Neither the name of Google Inc. nor the names of its
+//       contributors may be used to endorse or promote products derived
+//       from this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+// CPU specific code for arm independent of OS goes here.
+#ifdef __arm__
+#include <sys/syscall.h>  // for cache flushing.
+#endif
+
+#include "v8.h"
+
+#if defined(V8_TARGET_ARCH_ARM)
+
+#include "cpu.h"
+#include "macro-assembler.h"
+#include "simulator.h"  // for cache flushing.
+
+namespace v8 {
+namespace internal {
+
+void CPU::Setup() {
+  CpuFeatures::Probe();
+}
+
+
+bool CPU::SupportsCrankshaft() {
+  return CpuFeatures::IsSupported(VFP3);
+}
+
+
+void CPU::FlushICache(void* start, size_t size) {
+  // Nothing to do flushing no instructions.
+  if (size == 0) {
+    return;
+  }
+
+#if defined (USE_SIMULATOR)
+  // Not generating ARM instructions for C-code. This means that we are
+  // building an ARM emulator based target.  We should notify the simulator
+  // that the Icache was flushed.
+  // None of this code ends up in the snapshot so there are no issues
+  // around whether or not to generate the code when building snapshots.
+  Simulator::FlushICache(Isolate::Current()->simulator_i_cache(), start, size);
+#else
+  // Ideally, we would call
+  //   syscall(__ARM_NR_cacheflush, start,
+  //           reinterpret_cast<intptr_t>(start) + size, 0);
+  // however, syscall(int, ...) is not supported on all platforms, especially
+  // not when using EABI, so we call the __ARM_NR_cacheflush syscall directly.
+
+  register uint32_t beg asm("a1") = reinterpret_cast<uint32_t>(start);
+  register uint32_t end asm("a2") =
+      reinterpret_cast<uint32_t>(start) + size;
+  register uint32_t flg asm("a3") = 0;
+  #if defined (__arm__) && !defined(__thumb__)
+    // __arm__ may be defined in thumb mode.
+    register uint32_t scno asm("r7") = __ARM_NR_cacheflush;
+    asm volatile(
+        "svc 0x0"
+        : "=r" (beg)
+        : "0" (beg), "r" (end), "r" (flg), "r" (scno));
+  #else
+    // r7 is reserved by the EABI in thumb mode.
+    asm volatile(
+    "@   Enter ARM Mode  \n\t"
+        "adr r3, 1f      \n\t"
+        "bx  r3          \n\t"
+        ".ALIGN 4        \n\t"
+        ".ARM            \n"
+    "1:  push {r7}       \n\t"
+        "mov r7, %4      \n\t"
+        "svc 0x0         \n\t"
+        "pop {r7}        \n\t"
+    "@   Enter THUMB Mode\n\t"
+        "adr r3, 2f+1    \n\t"
+        "bx  r3          \n\t"
+        ".THUMB          \n"
+    "2:                  \n\t"
+        : "=r" (beg)
+        : "0" (beg), "r" (end), "r" (flg), "r" (__ARM_NR_cacheflush)
+        : "r3");
+  #endif
+#endif
+}
+
+
+void CPU::DebugBreak() {
+#if !defined (__arm__) || !defined(CAN_USE_ARMV5_INSTRUCTIONS)
+  UNIMPLEMENTED();  // when building ARM emulator target
+#else
+  asm volatile("bkpt 0");
+#endif
+}
+
+} }  // namespace v8::internal
+
+#endif  // V8_TARGET_ARCH_ARM

data/lib/libv8/v8/src/arm/debug-arm.cc

@@ -0,0 +1,317 @@
+// Copyright 2011 the V8 project authors. All rights reserved.
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+//       notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+//       copyright notice, this list of conditions and the following
+//       disclaimer in the documentation and/or other materials provided
+//       with the distribution.
+//     * Neither the name of Google Inc. nor the names of its
+//       contributors may be used to endorse or promote products derived
+//       from this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#include "v8.h"
+
+#if defined(V8_TARGET_ARCH_ARM)
+
+#include "codegen.h"
+#include "debug.h"
+
+namespace v8 {
+namespace internal {
+
+#ifdef ENABLE_DEBUGGER_SUPPORT
+bool BreakLocationIterator::IsDebugBreakAtReturn() {
+  return Debug::IsDebugBreakAtReturn(rinfo());
+}
+
+
+void BreakLocationIterator::SetDebugBreakAtReturn() {
+  // Patch the code changing the return from JS function sequence from
+  //   mov sp, fp
+  //   ldmia sp!, {fp, lr}
+  //   add sp, sp, #4
+  //   bx lr
+  // to a call to the debug break return code.
+  // #if USE_BLX
+  //   ldr ip, [pc, #0]
+  //   blx ip
+  // #else
+  //   mov lr, pc
+  //   ldr pc, [pc, #-4]
+  // #endif
+  //   <debug break return code entry point address>
+  //   bktp 0
+  CodePatcher patcher(rinfo()->pc(), Assembler::kJSReturnSequenceInstructions);
+#ifdef USE_BLX
+  patcher.masm()->ldr(v8::internal::ip, MemOperand(v8::internal::pc, 0));
+  patcher.masm()->blx(v8::internal::ip);
+#else
+  patcher.masm()->mov(v8::internal::lr, v8::internal::pc);
+  patcher.masm()->ldr(v8::internal::pc, MemOperand(v8::internal::pc, -4));
+#endif
+  patcher.Emit(Isolate::Current()->debug()->debug_break_return()->entry());
+  patcher.masm()->bkpt(0);
+}
+
+
+// Restore the JS frame exit code.
+void BreakLocationIterator::ClearDebugBreakAtReturn() {
+  rinfo()->PatchCode(original_rinfo()->pc(),
+                     Assembler::kJSReturnSequenceInstructions);
+}
+
+
+// A debug break in the frame exit code is identified by the JS frame exit code
+// having been patched with a call instruction.
+bool Debug::IsDebugBreakAtReturn(RelocInfo* rinfo) {
+  ASSERT(RelocInfo::IsJSReturn(rinfo->rmode()));
+  return rinfo->IsPatchedReturnSequence();
+}
+
+
+bool BreakLocationIterator::IsDebugBreakAtSlot() {
+  ASSERT(IsDebugBreakSlot());
+  // Check whether the debug break slot instructions have been patched.
+  return rinfo()->IsPatchedDebugBreakSlotSequence();
+}
+
+
+void BreakLocationIterator::SetDebugBreakAtSlot() {
+  ASSERT(IsDebugBreakSlot());
+  // Patch the code changing the debug break slot code from
+  //   mov r2, r2
+  //   mov r2, r2
+  //   mov r2, r2
+  // to a call to the debug break slot code.
+  // #if USE_BLX
+  //   ldr ip, [pc, #0]
+  //   blx ip
+  // #else
+  //   mov lr, pc
+  //   ldr pc, [pc, #-4]
+  // #endif
+  //   <debug break slot code entry point address>
+  CodePatcher patcher(rinfo()->pc(), Assembler::kDebugBreakSlotInstructions);
+#ifdef USE_BLX
+  patcher.masm()->ldr(v8::internal::ip, MemOperand(v8::internal::pc, 0));
+  patcher.masm()->blx(v8::internal::ip);
+#else
+  patcher.masm()->mov(v8::internal::lr, v8::internal::pc);
+  patcher.masm()->ldr(v8::internal::pc, MemOperand(v8::internal::pc, -4));
+#endif
+  patcher.Emit(Isolate::Current()->debug()->debug_break_slot()->entry());
+}
+
+
+void BreakLocationIterator::ClearDebugBreakAtSlot() {
+  ASSERT(IsDebugBreakSlot());
+  rinfo()->PatchCode(original_rinfo()->pc(),
+                     Assembler::kDebugBreakSlotInstructions);
+}
+
+
+#define __ ACCESS_MASM(masm)
+
+
+static void Generate_DebugBreakCallHelper(MacroAssembler* masm,
+                                          RegList object_regs,
+                                          RegList non_object_regs) {
+  __ EnterInternalFrame();
+
+  // Store the registers containing live values on the expression stack to
+  // make sure that these are correctly updated during GC. Non object values
+  // are stored as a smi causing it to be untouched by GC.
+  ASSERT((object_regs & ~kJSCallerSaved) == 0);
+  ASSERT((non_object_regs & ~kJSCallerSaved) == 0);
+  ASSERT((object_regs & non_object_regs) == 0);
+  if ((object_regs | non_object_regs) != 0) {
+    for (int i = 0; i < kNumJSCallerSaved; i++) {
+      int r = JSCallerSavedCode(i);
+      Register reg = { r };
+      if ((non_object_regs & (1 << r)) != 0) {
+        if (FLAG_debug_code) {
+          __ tst(reg, Operand(0xc0000000));
+          __ Assert(eq, "Unable to encode value as smi");
+        }
+        __ mov(reg, Operand(reg, LSL, kSmiTagSize));
+      }
+    }
+    __ stm(db_w, sp, object_regs | non_object_regs);
+  }
+
+#ifdef DEBUG
+  __ RecordComment("// Calling from debug break to runtime - come in - over");
+#endif
+  __ mov(r0, Operand(0, RelocInfo::NONE));  // no arguments
+  __ mov(r1, Operand(ExternalReference::debug_break(masm->isolate())));
+
+  CEntryStub ceb(1);
+  __ CallStub(&ceb);
+
+  // Restore the register values from the expression stack.
+  if ((object_regs | non_object_regs) != 0) {
+    __ ldm(ia_w, sp, object_regs | non_object_regs);
+    for (int i = 0; i < kNumJSCallerSaved; i++) {
+      int r = JSCallerSavedCode(i);
+      Register reg = { r };
+      if ((non_object_regs & (1 << r)) != 0) {
+        __ mov(reg, Operand(reg, LSR, kSmiTagSize));
+      }
+      if (FLAG_debug_code &&
+          (((object_regs |non_object_regs) & (1 << r)) == 0)) {
+        __ mov(reg, Operand(kDebugZapValue));
+      }
+    }
+  }
+
+  __ LeaveInternalFrame();
+
+  // Now that the break point has been handled, resume normal execution by
+  // jumping to the target address intended by the caller and that was
+  // overwritten by the address of DebugBreakXXX.
+  ExternalReference after_break_target =
+      ExternalReference(Debug_Address::AfterBreakTarget(), masm->isolate());
+  __ mov(ip, Operand(after_break_target));
+  __ ldr(ip, MemOperand(ip));
+  __ Jump(ip);
+}
+
+
+void Debug::GenerateLoadICDebugBreak(MacroAssembler* masm) {
+  // Calling convention for IC load (from ic-arm.cc).
+  // ----------- S t a t e -------------
+  //  -- r2    : name
+  //  -- lr    : return address
+  //  -- r0    : receiver
+  //  -- [sp]  : receiver
+  // -----------------------------------
+  // Registers r0 and r2 contain objects that need to be pushed on the
+  // expression stack of the fake JS frame.
+  Generate_DebugBreakCallHelper(masm, r0.bit() | r2.bit(), 0);
+}
+
+
+void Debug::GenerateStoreICDebugBreak(MacroAssembler* masm) {
+  // Calling convention for IC store (from ic-arm.cc).
+  // ----------- S t a t e -------------
+  //  -- r0    : value
+  //  -- r1    : receiver
+  //  -- r2    : name
+  //  -- lr    : return address
+  // -----------------------------------
+  // Registers r0, r1, and r2 contain objects that need to be pushed on the
+  // expression stack of the fake JS frame.
+  Generate_DebugBreakCallHelper(masm, r0.bit() | r1.bit() | r2.bit(), 0);
+}
+
+
+void Debug::GenerateKeyedLoadICDebugBreak(MacroAssembler* masm) {
+  // ---------- S t a t e --------------
+  //  -- lr     : return address
+  //  -- r0     : key
+  //  -- r1     : receiver
+  Generate_DebugBreakCallHelper(masm, r0.bit() | r1.bit(), 0);
+}
+
+
+void Debug::GenerateKeyedStoreICDebugBreak(MacroAssembler* masm) {
+  // ---------- S t a t e --------------
+  //  -- r0     : value
+  //  -- r1     : key
+  //  -- r2     : receiver
+  //  -- lr     : return address
+  Generate_DebugBreakCallHelper(masm, r0.bit() | r1.bit() | r2.bit(), 0);
+}
+
+
+void Debug::GenerateCallICDebugBreak(MacroAssembler* masm) {
+  // Calling convention for IC call (from ic-arm.cc)
+  // ----------- S t a t e -------------
+  //  -- r2     : name
+  // -----------------------------------
+  Generate_DebugBreakCallHelper(masm, r2.bit(), 0);
+}
+
+
+void Debug::GenerateConstructCallDebugBreak(MacroAssembler* masm) {
+  // Calling convention for construct call (from builtins-arm.cc)
+  //  -- r0     : number of arguments (not smi)
+  //  -- r1     : constructor function
+  Generate_DebugBreakCallHelper(masm, r1.bit(), r0.bit());
+}
+
+
+void Debug::GenerateReturnDebugBreak(MacroAssembler* masm) {
+  // In places other than IC call sites it is expected that r0 is TOS which
+  // is an object - this is not generally the case so this should be used with
+  // care.
+  Generate_DebugBreakCallHelper(masm, r0.bit(), 0);
+}
+
+
+void Debug::GenerateStubNoRegistersDebugBreak(MacroAssembler* masm) {
+  // ----------- S t a t e -------------
+  //  No registers used on entry.
+  // -----------------------------------
+  Generate_DebugBreakCallHelper(masm, 0, 0);
+}
+
+
+void Debug::GenerateSlot(MacroAssembler* masm) {
+  // Generate enough nop's to make space for a call instruction. Avoid emitting
+  // the constant pool in the debug break slot code.
+  Assembler::BlockConstPoolScope block_const_pool(masm);
+  Label check_codesize;
+  __ bind(&check_codesize);
+  __ RecordDebugBreakSlot();
+  for (int i = 0; i < Assembler::kDebugBreakSlotInstructions; i++) {
+    __ nop(MacroAssembler::DEBUG_BREAK_NOP);
+  }
+  ASSERT_EQ(Assembler::kDebugBreakSlotInstructions,
+            masm->InstructionsGeneratedSince(&check_codesize));
+}
+
+
+void Debug::GenerateSlotDebugBreak(MacroAssembler* masm) {
+  // In the places where a debug break slot is inserted no registers can contain
+  // object pointers.
+  Generate_DebugBreakCallHelper(masm, 0, 0);
+}
+
+
+void Debug::GeneratePlainReturnLiveEdit(MacroAssembler* masm) {
+  masm->Abort("LiveEdit frame dropping is not supported on arm");
+}
+
+
+void Debug::GenerateFrameDropperLiveEdit(MacroAssembler* masm) {
+  masm->Abort("LiveEdit frame dropping is not supported on arm");
+}
+
+const bool Debug::kFrameDropperSupported = false;
+
+#undef __
+
+
+
+#endif  // ENABLE_DEBUGGER_SUPPORT
+
+} }  // namespace v8::internal
+
+#endif  // V8_TARGET_ARCH_ARM

data/lib/libv8/v8/src/arm/deoptimizer-arm.cc

@@ -0,0 +1,754 @@
+// Copyright 2011 the V8 project authors. All rights reserved.
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+//       notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+//       copyright notice, this list of conditions and the following
+//       disclaimer in the documentation and/or other materials provided
+//       with the distribution.
+//     * Neither the name of Google Inc. nor the names of its
+//       contributors may be used to endorse or promote products derived
+//       from this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#include "v8.h"
+
+#include "codegen.h"
+#include "deoptimizer.h"
+#include "full-codegen.h"
+#include "safepoint-table.h"
+
+namespace v8 {
+namespace internal {
+
+int Deoptimizer::table_entry_size_ = 16;
+
+
+int Deoptimizer::patch_size() {
+  const int kCallInstructionSizeInWords = 3;
+  return kCallInstructionSizeInWords * Assembler::kInstrSize;
+}
+
+
+void Deoptimizer::EnsureRelocSpaceForLazyDeoptimization(Handle<Code> code) {
+  // Nothing to do. No new relocation information is written for lazy
+  // deoptimization on ARM.
+}
+
+
+void Deoptimizer::DeoptimizeFunction(JSFunction* function) {
+  HandleScope scope;
+  AssertNoAllocation no_allocation;
+
+  if (!function->IsOptimized()) return;
+
+  // Get the optimized code.
+  Code* code = function->code();
+
+  // Invalidate the relocation information, as it will become invalid by the
+  // code patching below, and is not needed any more.
+  code->InvalidateRelocation();
+
+  // For each return after a safepoint insert an absolute call to the
+  // corresponding deoptimization entry.
+  ASSERT(patch_size() % Assembler::kInstrSize == 0);
+  int call_size_in_words = patch_size() / Assembler::kInstrSize;
+  unsigned last_pc_offset = 0;
+  SafepointTable table(function->code());
+  for (unsigned i = 0; i < table.length(); i++) {
+    unsigned pc_offset = table.GetPcOffset(i);
+    SafepointEntry safepoint_entry = table.GetEntry(i);
+    int deoptimization_index = safepoint_entry.deoptimization_index();
+    int gap_code_size = safepoint_entry.gap_code_size();
+    // Check that we did not shoot past next safepoint.
+    CHECK(pc_offset >= last_pc_offset);
+#ifdef DEBUG
+    // Destroy the code which is not supposed to be run again.
+    int instructions = (pc_offset - last_pc_offset) / Assembler::kInstrSize;
+    CodePatcher destroyer(code->instruction_start() + last_pc_offset,
+                          instructions);
+    for (int x = 0; x < instructions; x++) {
+      destroyer.masm()->bkpt(0);
+    }
+#endif
+    last_pc_offset = pc_offset;
+    if (deoptimization_index != Safepoint::kNoDeoptimizationIndex) {
+      last_pc_offset += gap_code_size;
+      CodePatcher patcher(code->instruction_start() + last_pc_offset,
+                          call_size_in_words);
+      Address deoptimization_entry = Deoptimizer::GetDeoptimizationEntry(
+          deoptimization_index, Deoptimizer::LAZY);
+      patcher.masm()->Call(deoptimization_entry, RelocInfo::NONE);
+      last_pc_offset += patch_size();
+    }
+  }
+
+
+#ifdef DEBUG
+  // Destroy the code which is not supposed to be run again.
+  int instructions =
+      (code->safepoint_table_offset() - last_pc_offset) / Assembler::kInstrSize;
+  CodePatcher destroyer(code->instruction_start() + last_pc_offset,
+                        instructions);
+  for (int x = 0; x < instructions; x++) {
+    destroyer.masm()->bkpt(0);
+  }
+#endif
+
+  // Add the deoptimizing code to the list.
+  DeoptimizingCodeListNode* node = new DeoptimizingCodeListNode(code);
+  DeoptimizerData* data = code->GetIsolate()->deoptimizer_data();
+  node->set_next(data->deoptimizing_code_list_);
+  data->deoptimizing_code_list_ = node;
+
+  // Set the code for the function to non-optimized version.
+  function->ReplaceCode(function->shared()->code());
+
+  if (FLAG_trace_deopt) {
+    PrintF("[forced deoptimization: ");
+    function->PrintName();
+    PrintF(" / %x]\n", reinterpret_cast<uint32_t>(function));
+#ifdef DEBUG
+    if (FLAG_print_code) {
+      code->PrintLn();
+    }
+#endif
+  }
+}
+
+
+void Deoptimizer::PatchStackCheckCodeAt(Address pc_after,
+                                        Code* check_code,
+                                        Code* replacement_code) {
+  const int kInstrSize = Assembler::kInstrSize;
+  // The call of the stack guard check has the following form:
+  //  e1 5d 00 0c       cmp sp, <limit>
+  //  2a 00 00 01       bcs ok
+  //  e5 9f c? ??       ldr ip, [pc, <stack guard address>]
+  //  e1 2f ff 3c       blx ip
+  ASSERT(Memory::int32_at(pc_after - kInstrSize) ==
+      (al | B24 | B21 | 15*B16 | 15*B12 | 15*B8 | BLX | ip.code()));
+  ASSERT(Assembler::IsLdrPcImmediateOffset(
+      Assembler::instr_at(pc_after - 2 * kInstrSize)));
+
+  // We patch the code to the following form:
+  //  e1 5d 00 0c       cmp sp, <limit>
+  //  e1 a0 00 00       mov r0, r0 (NOP)
+  //  e5 9f c? ??       ldr ip, [pc, <on-stack replacement address>]
+  //  e1 2f ff 3c       blx ip
+  // and overwrite the constant containing the
+  // address of the stack check stub.
+
+  // Replace conditional jump with NOP.
+  CodePatcher patcher(pc_after - 3 * kInstrSize, 1);
+  patcher.masm()->nop();
+
+  // Replace the stack check address in the constant pool
+  // with the entry address of the replacement code.
+  uint32_t stack_check_address_offset = Memory::uint16_at(pc_after -
+      2 * kInstrSize) & 0xfff;
+  Address stack_check_address_pointer = pc_after + stack_check_address_offset;
+  ASSERT(Memory::uint32_at(stack_check_address_pointer) ==
+         reinterpret_cast<uint32_t>(check_code->entry()));
+  Memory::uint32_at(stack_check_address_pointer) =
+      reinterpret_cast<uint32_t>(replacement_code->entry());
+}
+
+
+void Deoptimizer::RevertStackCheckCodeAt(Address pc_after,
+                                         Code* check_code,
+                                         Code* replacement_code) {
+  const int kInstrSize = Assembler::kInstrSize;
+  ASSERT(Memory::uint32_at(pc_after - kInstrSize) == 0xe12fff3c);
+  ASSERT(Memory::uint8_at(pc_after - kInstrSize - 1) == 0xe5);
+  ASSERT(Memory::uint8_at(pc_after - kInstrSize - 2) == 0x9f);
+
+  // Replace NOP with conditional jump.
+  CodePatcher patcher(pc_after - 3 * kInstrSize, 1);
+  patcher.masm()->b(+4, cs);
+
+  // Replace the stack check address in the constant pool
+  // with the entry address of the replacement code.
+  uint32_t stack_check_address_offset = Memory::uint16_at(pc_after -
+      2 * kInstrSize) & 0xfff;
+  Address stack_check_address_pointer = pc_after + stack_check_address_offset;
+  ASSERT(Memory::uint32_at(stack_check_address_pointer) ==
+         reinterpret_cast<uint32_t>(replacement_code->entry()));
+  Memory::uint32_at(stack_check_address_pointer) =
+      reinterpret_cast<uint32_t>(check_code->entry());
+}
+
+
+static int LookupBailoutId(DeoptimizationInputData* data, unsigned ast_id) {
+  ByteArray* translations = data->TranslationByteArray();
+  int length = data->DeoptCount();
+  for (int i = 0; i < length; i++) {
+    if (static_cast<unsigned>(data->AstId(i)->value()) == ast_id) {
+      TranslationIterator it(translations,  data->TranslationIndex(i)->value());
+      int value = it.Next();
+      ASSERT(Translation::BEGIN == static_cast<Translation::Opcode>(value));
+      // Read the number of frames.
+      value = it.Next();
+      if (value == 1) return i;
+    }
+  }
+  UNREACHABLE();
+  return -1;
+}
+
+
+void Deoptimizer::DoComputeOsrOutputFrame() {
+  DeoptimizationInputData* data = DeoptimizationInputData::cast(
+      optimized_code_->deoptimization_data());
+  unsigned ast_id = data->OsrAstId()->value();
+
+  int bailout_id = LookupBailoutId(data, ast_id);
+  unsigned translation_index = data->TranslationIndex(bailout_id)->value();
+  ByteArray* translations = data->TranslationByteArray();
+
+  TranslationIterator iterator(translations, translation_index);
+  Translation::Opcode opcode =
+      static_cast<Translation::Opcode>(iterator.Next());
+  ASSERT(Translation::BEGIN == opcode);
+  USE(opcode);
+  int count = iterator.Next();
+  ASSERT(count == 1);
+  USE(count);
+
+  opcode = static_cast<Translation::Opcode>(iterator.Next());
+  USE(opcode);
+  ASSERT(Translation::FRAME == opcode);
+  unsigned node_id = iterator.Next();
+  USE(node_id);
+  ASSERT(node_id == ast_id);
+  JSFunction* function = JSFunction::cast(ComputeLiteral(iterator.Next()));
+  USE(function);
+  ASSERT(function == function_);
+  unsigned height = iterator.Next();
+  unsigned height_in_bytes = height * kPointerSize;
+  USE(height_in_bytes);
+
+  unsigned fixed_size = ComputeFixedSize(function_);
+  unsigned input_frame_size = input_->GetFrameSize();
+  ASSERT(fixed_size + height_in_bytes == input_frame_size);
+
+  unsigned stack_slot_size = optimized_code_->stack_slots() * kPointerSize;
+  unsigned outgoing_height = data->ArgumentsStackHeight(bailout_id)->value();
+  unsigned outgoing_size = outgoing_height * kPointerSize;
+  unsigned output_frame_size = fixed_size + stack_slot_size + outgoing_size;
+  ASSERT(outgoing_size == 0);  // OSR does not happen in the middle of a call.
+
+  if (FLAG_trace_osr) {
+    PrintF("[on-stack replacement: begin 0x%08" V8PRIxPTR " ",
+           reinterpret_cast<intptr_t>(function_));
+    function_->PrintName();
+    PrintF(" => node=%u, frame=%d->%d]\n",
+           ast_id,
+           input_frame_size,
+           output_frame_size);
+  }
+
+  // There's only one output frame in the OSR case.
+  output_count_ = 1;
+  output_ = new FrameDescription*[1];
+  output_[0] = new(output_frame_size) FrameDescription(
+      output_frame_size, function_);
+
+  // Clear the incoming parameters in the optimized frame to avoid
+  // confusing the garbage collector.
+  unsigned output_offset = output_frame_size - kPointerSize;
+  int parameter_count = function_->shared()->formal_parameter_count() + 1;
+  for (int i = 0; i < parameter_count; ++i) {
+    output_[0]->SetFrameSlot(output_offset, 0);
+    output_offset -= kPointerSize;
+  }
+
+  // Translate the incoming parameters. This may overwrite some of the
+  // incoming argument slots we've just cleared.
+  int input_offset = input_frame_size - kPointerSize;
+  bool ok = true;
+  int limit = input_offset - (parameter_count * kPointerSize);
+  while (ok && input_offset > limit) {
+    ok = DoOsrTranslateCommand(&iterator, &input_offset);
+  }
+
+  // There are no translation commands for the caller's pc and fp, the
+  // context, and the function.  Set them up explicitly.
+  for (int i =  StandardFrameConstants::kCallerPCOffset;
+       ok && i >=  StandardFrameConstants::kMarkerOffset;
+       i -= kPointerSize) {
+    uint32_t input_value = input_->GetFrameSlot(input_offset);
+    if (FLAG_trace_osr) {
+      const char* name = "UNKNOWN";
+      switch (i) {
+        case StandardFrameConstants::kCallerPCOffset:
+          name = "caller's pc";
+          break;
+        case StandardFrameConstants::kCallerFPOffset:
+          name = "fp";
+          break;
+        case StandardFrameConstants::kContextOffset:
+          name = "context";
+          break;
+        case StandardFrameConstants::kMarkerOffset:
+          name = "function";
+          break;
+      }
+      PrintF("    [sp + %d] <- 0x%08x ; [sp + %d] (fixed part - %s)\n",
+             output_offset,
+             input_value,
+             input_offset,
+             name);
+    }
+
+    output_[0]->SetFrameSlot(output_offset, input_->GetFrameSlot(input_offset));
+    input_offset -= kPointerSize;
+    output_offset -= kPointerSize;
+  }
+
+  // Translate the rest of the frame.
+  while (ok && input_offset >= 0) {
+    ok = DoOsrTranslateCommand(&iterator, &input_offset);
+  }
+
+  // If translation of any command failed, continue using the input frame.
+  if (!ok) {
+    delete output_[0];
+    output_[0] = input_;
+    output_[0]->SetPc(reinterpret_cast<uint32_t>(from_));
+  } else {
+    // Setup the frame pointer and the context pointer.
+    output_[0]->SetRegister(fp.code(), input_->GetRegister(fp.code()));
+    output_[0]->SetRegister(cp.code(), input_->GetRegister(cp.code()));
+
+    unsigned pc_offset = data->OsrPcOffset()->value();
+    uint32_t pc = reinterpret_cast<uint32_t>(
+        optimized_code_->entry() + pc_offset);
+    output_[0]->SetPc(pc);
+  }
+  Code* continuation = isolate_->builtins()->builtin(Builtins::kNotifyOSR);
+  output_[0]->SetContinuation(
+      reinterpret_cast<uint32_t>(continuation->entry()));
+
+  if (FLAG_trace_osr) {
+    PrintF("[on-stack replacement translation %s: 0x%08" V8PRIxPTR " ",
+           ok ? "finished" : "aborted",
+           reinterpret_cast<intptr_t>(function));
+    function->PrintName();
+    PrintF(" => pc=0x%0x]\n", output_[0]->GetPc());
+  }
+}
+
+
+// This code is very similar to ia32 code, but relies on register names (fp, sp)
+// and how the frame is laid out.
+void Deoptimizer::DoComputeFrame(TranslationIterator* iterator,
+                                 int frame_index) {
+  // Read the ast node id, function, and frame height for this output frame.
+  Translation::Opcode opcode =
+      static_cast<Translation::Opcode>(iterator->Next());
+  USE(opcode);
+  ASSERT(Translation::FRAME == opcode);
+  int node_id = iterator->Next();
+  JSFunction* function = JSFunction::cast(ComputeLiteral(iterator->Next()));
+  unsigned height = iterator->Next();
+  unsigned height_in_bytes = height * kPointerSize;
+  if (FLAG_trace_deopt) {
+    PrintF("  translating ");
+    function->PrintName();
+    PrintF(" => node=%d, height=%d\n", node_id, height_in_bytes);
+  }
+
+  // The 'fixed' part of the frame consists of the incoming parameters and
+  // the part described by JavaScriptFrameConstants.
+  unsigned fixed_frame_size = ComputeFixedSize(function);
+  unsigned input_frame_size = input_->GetFrameSize();
+  unsigned output_frame_size = height_in_bytes + fixed_frame_size;
+
+  // Allocate and store the output frame description.
+  FrameDescription* output_frame =
+      new(output_frame_size) FrameDescription(output_frame_size, function);
+
+  bool is_bottommost = (0 == frame_index);
+  bool is_topmost = (output_count_ - 1 == frame_index);
+  ASSERT(frame_index >= 0 && frame_index < output_count_);
+  ASSERT(output_[frame_index] == NULL);
+  output_[frame_index] = output_frame;
+
+  // The top address for the bottommost output frame can be computed from
+  // the input frame pointer and the output frame's height.  For all
+  // subsequent output frames, it can be computed from the previous one's
+  // top address and the current frame's size.
+  uint32_t top_address;
+  if (is_bottommost) {
+    // 2 = context and function in the frame.
+    top_address =
+        input_->GetRegister(fp.code()) - (2 * kPointerSize) - height_in_bytes;
+  } else {
+    top_address = output_[frame_index - 1]->GetTop() - output_frame_size;
+  }
+  output_frame->SetTop(top_address);
+
+  // Compute the incoming parameter translation.
+  int parameter_count = function->shared()->formal_parameter_count() + 1;
+  unsigned output_offset = output_frame_size;
+  unsigned input_offset = input_frame_size;
+  for (int i = 0; i < parameter_count; ++i) {
+    output_offset -= kPointerSize;
+    DoTranslateCommand(iterator, frame_index, output_offset);
+  }
+  input_offset -= (parameter_count * kPointerSize);
+
+  // There are no translation commands for the caller's pc and fp, the
+  // context, and the function.  Synthesize their values and set them up
+  // explicitly.
+  //
+  // The caller's pc for the bottommost output frame is the same as in the
+  // input frame.  For all subsequent output frames, it can be read from the
+  // previous one.  This frame's pc can be computed from the non-optimized
+  // function code and AST id of the bailout.
+  output_offset -= kPointerSize;
+  input_offset -= kPointerSize;
+  intptr_t value;
+  if (is_bottommost) {
+    value = input_->GetFrameSlot(input_offset);
+  } else {
+    value = output_[frame_index - 1]->GetPc();
+  }
+  output_frame->SetFrameSlot(output_offset, value);
+  if (FLAG_trace_deopt) {
+    PrintF("    0x%08x: [top + %d] <- 0x%08x ; caller's pc\n",
+           top_address + output_offset, output_offset, value);
+  }
+
+  // The caller's frame pointer for the bottommost output frame is the same
+  // as in the input frame.  For all subsequent output frames, it can be
+  // read from the previous one.  Also compute and set this frame's frame
+  // pointer.
+  output_offset -= kPointerSize;
+  input_offset -= kPointerSize;
+  if (is_bottommost) {
+    value = input_->GetFrameSlot(input_offset);
+  } else {
+    value = output_[frame_index - 1]->GetFp();
+  }
+  output_frame->SetFrameSlot(output_offset, value);
+  intptr_t fp_value = top_address + output_offset;
+  ASSERT(!is_bottommost || input_->GetRegister(fp.code()) == fp_value);
+  output_frame->SetFp(fp_value);
+  if (is_topmost) {
+    output_frame->SetRegister(fp.code(), fp_value);
+  }
+  if (FLAG_trace_deopt) {
+    PrintF("    0x%08x: [top + %d] <- 0x%08x ; caller's fp\n",
+           fp_value, output_offset, value);
+  }
+
+  // For the bottommost output frame the context can be gotten from the input
+  // frame. For all subsequent output frames it can be gotten from the function
+  // so long as we don't inline functions that need local contexts.
+  output_offset -= kPointerSize;
+  input_offset -= kPointerSize;
+  if (is_bottommost) {
+    value = input_->GetFrameSlot(input_offset);
+  } else {
+    value = reinterpret_cast<intptr_t>(function->context());
+  }
+  output_frame->SetFrameSlot(output_offset, value);
+  if (is_topmost) {
+    output_frame->SetRegister(cp.code(), value);
+  }
+  if (FLAG_trace_deopt) {
+    PrintF("    0x%08x: [top + %d] <- 0x%08x ; context\n",
+           top_address + output_offset, output_offset, value);
+  }
+
+  // The function was mentioned explicitly in the BEGIN_FRAME.
+  output_offset -= kPointerSize;
+  input_offset -= kPointerSize;
+  value = reinterpret_cast<uint32_t>(function);
+  // The function for the bottommost output frame should also agree with the
+  // input frame.
+  ASSERT(!is_bottommost || input_->GetFrameSlot(input_offset) == value);
+  output_frame->SetFrameSlot(output_offset, value);
+  if (FLAG_trace_deopt) {
+    PrintF("    0x%08x: [top + %d] <- 0x%08x ; function\n",
+           top_address + output_offset, output_offset, value);
+  }
+
+  // Translate the rest of the frame.
+  for (unsigned i = 0; i < height; ++i) {
+    output_offset -= kPointerSize;
+    DoTranslateCommand(iterator, frame_index, output_offset);
+  }
+  ASSERT(0 == output_offset);
+
+  // Compute this frame's PC, state, and continuation.
+  Code* non_optimized_code = function->shared()->code();
+  FixedArray* raw_data = non_optimized_code->deoptimization_data();
+  DeoptimizationOutputData* data = DeoptimizationOutputData::cast(raw_data);
+  Address start = non_optimized_code->instruction_start();
+  unsigned pc_and_state = GetOutputInfo(data, node_id, function->shared());
+  unsigned pc_offset = FullCodeGenerator::PcField::decode(pc_and_state);
+  uint32_t pc_value = reinterpret_cast<uint32_t>(start + pc_offset);
+  output_frame->SetPc(pc_value);
+  if (is_topmost) {
+    output_frame->SetRegister(pc.code(), pc_value);
+  }
+
+  FullCodeGenerator::State state =
+      FullCodeGenerator::StateField::decode(pc_and_state);
+  output_frame->SetState(Smi::FromInt(state));
+
+
+  // Set the continuation for the topmost frame.
+  if (is_topmost) {
+    Builtins* builtins = isolate_->builtins();
+    Code* continuation = (bailout_type_ == EAGER)
+        ? builtins->builtin(Builtins::kNotifyDeoptimized)
+        : builtins->builtin(Builtins::kNotifyLazyDeoptimized);
+    output_frame->SetContinuation(
+        reinterpret_cast<uint32_t>(continuation->entry()));
+  }
+
+  if (output_count_ - 1 == frame_index) iterator->Done();
+}
+
+
+#define __ masm()->
+
+
+// This code tries to be close to ia32 code so that any changes can be
+// easily ported.
+void Deoptimizer::EntryGenerator::Generate() {
+  GeneratePrologue();
+
+  Isolate* isolate = masm()->isolate();
+
+  CpuFeatures::Scope scope(VFP3);
+  // Save all general purpose registers before messing with them.
+  const int kNumberOfRegisters = Register::kNumRegisters;
+
+  // Everything but pc, lr and ip which will be saved but not restored.
+  RegList restored_regs = kJSCallerSaved | kCalleeSaved | ip.bit();
+
+  const int kDoubleRegsSize =
+      kDoubleSize * DwVfpRegister::kNumAllocatableRegisters;
+
+  // Save all VFP registers before messing with them.
+  DwVfpRegister first = DwVfpRegister::FromAllocationIndex(0);
+  DwVfpRegister last =
+      DwVfpRegister::FromAllocationIndex(
+          DwVfpRegister::kNumAllocatableRegisters - 1);
+  ASSERT(last.code() > first.code());
+  ASSERT((last.code() - first.code()) ==
+      (DwVfpRegister::kNumAllocatableRegisters - 1));
+#ifdef DEBUG
+  for (int i = 0; i <= (DwVfpRegister::kNumAllocatableRegisters - 1); i++) {
+    ASSERT((DwVfpRegister::FromAllocationIndex(i).code() <= last.code()) &&
+           (DwVfpRegister::FromAllocationIndex(i).code() >= first.code()));
+  }
+#endif
+  __ vstm(db_w, sp, first, last);
+
+  // Push all 16 registers (needed to populate FrameDescription::registers_).
+  __ stm(db_w, sp, restored_regs  | sp.bit() | lr.bit() | pc.bit());
+
+  const int kSavedRegistersAreaSize =
+      (kNumberOfRegisters * kPointerSize) + kDoubleRegsSize;
+
+  // Get the bailout id from the stack.
+  __ ldr(r2, MemOperand(sp, kSavedRegistersAreaSize));
+
+  // Get the address of the location in the code object if possible (r3) (return
+  // address for lazy deoptimization) and compute the fp-to-sp delta in
+  // register r4.
+  if (type() == EAGER) {
+    __ mov(r3, Operand(0));
+    // Correct one word for bailout id.
+    __ add(r4, sp, Operand(kSavedRegistersAreaSize + (1 * kPointerSize)));
+  } else if (type() == OSR) {
+    __ mov(r3, lr);
+    // Correct one word for bailout id.
+    __ add(r4, sp, Operand(kSavedRegistersAreaSize + (1 * kPointerSize)));
+  } else {
+    __ mov(r3, lr);
+    // Correct two words for bailout id and return address.
+    __ add(r4, sp, Operand(kSavedRegistersAreaSize + (2 * kPointerSize)));
+  }
+  __ sub(r4, fp, r4);
+
+  // Allocate a new deoptimizer object.
+  // Pass four arguments in r0 to r3 and fifth argument on stack.
+  __ PrepareCallCFunction(6, r5);
+  __ ldr(r0, MemOperand(fp, JavaScriptFrameConstants::kFunctionOffset));
+  __ mov(r1, Operand(type()));  // bailout type,
+  // r2: bailout id already loaded.
+  // r3: code address or 0 already loaded.
+  __ str(r4, MemOperand(sp, 0 * kPointerSize));  // Fp-to-sp delta.
+  __ mov(r5, Operand(ExternalReference::isolate_address()));
+  __ str(r5, MemOperand(sp, 1 * kPointerSize));  // Isolate.
+  // Call Deoptimizer::New().
+  __ CallCFunction(ExternalReference::new_deoptimizer_function(isolate), 6);
+
+  // Preserve "deoptimizer" object in register r0 and get the input
+  // frame descriptor pointer to r1 (deoptimizer->input_);
+  __ ldr(r1, MemOperand(r0, Deoptimizer::input_offset()));
+
+  // Copy core registers into FrameDescription::registers_[kNumRegisters].
+  ASSERT(Register::kNumRegisters == kNumberOfRegisters);
+  ASSERT(kNumberOfRegisters % 2 == 0);
+
+  Label arm_loop;
+  __ add(r6, r1, Operand(FrameDescription::registers_offset()));
+  __ mov(r5, Operand(sp));
+  __ mov(r4, Operand(kNumberOfRegisters / 2));
+
+  __ bind(&arm_loop);
+  __ Ldrd(r2, r3, MemOperand(r5, kPointerSize * 2, PostIndex));
+  __ sub(r4, r4, Operand(1), SetCC);
+  __ Strd(r2, r3, MemOperand(r6, kPointerSize * 2, PostIndex));
+  __ b(gt, &arm_loop);
+
+  // Copy VFP registers to
+  // double_registers_[DoubleRegister::kNumAllocatableRegisters]
+  Label vfp_loop;
+  __ add(r6, r1, Operand(FrameDescription::double_registers_offset()));
+  __ mov(r4, Operand(DwVfpRegister::kNumAllocatableRegisters));
+
+  __ bind(&vfp_loop);
+  __ Ldrd(r2, r3, MemOperand(r5, kDoubleSize, PostIndex));
+  __ sub(r4, r4, Operand(1), SetCC);
+  __ Strd(r2, r3, MemOperand(r6, kDoubleSize, PostIndex));
+  __ b(gt, &vfp_loop);
+
+  // Remove the bailout id, eventually return address, and the saved registers
+  // from the stack.
+  if (type() == EAGER || type() == OSR) {
+    __ add(sp, sp, Operand(kSavedRegistersAreaSize + (1 * kPointerSize)));
+  } else {
+    __ add(sp, sp, Operand(kSavedRegistersAreaSize + (2 * kPointerSize)));
+  }
+
+  // Compute a pointer to the unwinding limit in register r2; that is
+  // the first stack slot not part of the input frame.
+  __ ldr(r2, MemOperand(r1, FrameDescription::frame_size_offset()));
+  __ add(r2, r2, sp);
+
+  // Unwind the stack down to - but not including - the unwinding
+  // limit and copy the contents of the activation frame to the input
+  // frame description.
+  __ add(r3,  r1, Operand(FrameDescription::frame_content_offset()));
+  Label pop_loop;
+  __ bind(&pop_loop);
+  __ pop(r4);
+  __ str(r4, MemOperand(r3, 0));
+  __ add(r3, r3, Operand(sizeof(uint32_t)));
+  __ cmp(r2, sp);
+  __ b(ne, &pop_loop);
+
+  // Compute the output frame in the deoptimizer.
+  __ push(r0);  // Preserve deoptimizer object across call.
+  // r0: deoptimizer object; r1: scratch.
+  __ PrepareCallCFunction(1, r1);
+  // Call Deoptimizer::ComputeOutputFrames().
+  __ CallCFunction(
+      ExternalReference::compute_output_frames_function(isolate), 1);
+  __ pop(r0);  // Restore deoptimizer object (class Deoptimizer).
+
+  // Replace the current (input) frame with the output frames.
+  Label outer_push_loop, inner_push_loop;
+  // Outer loop state: r0 = current "FrameDescription** output_",
+  // r1 = one past the last FrameDescription**.
+  __ ldr(r1, MemOperand(r0, Deoptimizer::output_count_offset()));
+  __ ldr(r0, MemOperand(r0, Deoptimizer::output_offset()));  // r0 is output_.
+  __ add(r1, r0, Operand(r1, LSL, 2));
+  __ bind(&outer_push_loop);
+  // Inner loop state: r2 = current FrameDescription*, r3 = loop index.
+  __ ldr(r2, MemOperand(r0, 0));  // output_[ix]
+  __ ldr(r3, MemOperand(r2, FrameDescription::frame_size_offset()));
+  __ bind(&inner_push_loop);
+  __ sub(r3, r3, Operand(sizeof(uint32_t)));
+  // __ add(r6, r2, Operand(r3, LSL, 1));
+  __ add(r6, r2, Operand(r3));
+  __ ldr(r7, MemOperand(r6, FrameDescription::frame_content_offset()));
+  __ push(r7);
+  __ cmp(r3, Operand(0));
+  __ b(ne, &inner_push_loop);  // test for gt?
+  __ add(r0, r0, Operand(kPointerSize));
+  __ cmp(r0, r1);
+  __ b(lt, &outer_push_loop);
+
+  // Push state, pc, and continuation from the last output frame.
+  if (type() != OSR) {
+    __ ldr(r6, MemOperand(r2, FrameDescription::state_offset()));
+    __ push(r6);
+  }
+
+  __ ldr(r6, MemOperand(r2, FrameDescription::pc_offset()));
+  __ push(r6);
+  __ ldr(r6, MemOperand(r2, FrameDescription::continuation_offset()));
+  __ push(r6);
+
+  // Push the registers from the last output frame.
+  for (int i = kNumberOfRegisters - 1; i >= 0; i--) {
+    int offset = (i * kPointerSize) + FrameDescription::registers_offset();
+    __ ldr(r6, MemOperand(r2, offset));
+    __ push(r6);
+  }
+
+  // Restore the registers from the stack.
+  __ ldm(ia_w, sp, restored_regs);  // all but pc registers.
+  __ pop(ip);  // remove sp
+  __ pop(ip);  // remove lr
+
+  // Set up the roots register.
+  ExternalReference roots_address = ExternalReference::roots_address(isolate);
+  __ mov(r10, Operand(roots_address));
+
+  __ pop(ip);  // remove pc
+  __ pop(r7);  // get continuation, leave pc on stack
+  __ pop(lr);
+  __ Jump(r7);
+  __ stop("Unreachable.");
+}
+
+
+void Deoptimizer::TableEntryGenerator::GeneratePrologue() {
+  // Create a sequence of deoptimization entries. Note that any
+  // registers may be still live.
+  Label done;
+  for (int i = 0; i < count(); i++) {
+    int start = masm()->pc_offset();
+    USE(start);
+    if (type() == EAGER) {
+      __ nop();
+    } else {
+      // Emulate ia32 like call by pushing return address to stack.
+      __ push(lr);
+    }
+    __ mov(ip, Operand(i));
+    __ push(ip);
+    __ b(&done);
+    ASSERT(masm()->pc_offset() - start == table_entry_size_);
+  }
+  __ bind(&done);
+}
+
+#undef __
+
+} }  // namespace v8::internal