isbn 2.0.4 → 2.0.5

data/src/jpeg-7/jmorecfg.h

@@ -1,369 +0,0 @@
-/*
- * jmorecfg.h
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 1997-2009 by Guido Vollbeding.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains additional configuration options that customize the
- * JPEG software for special applications or support machine-dependent
- * optimizations.  Most users will not need to touch this file.
- */
-
-
-/*
- * Define BITS_IN_JSAMPLE as either
- *   8   for 8-bit sample values (the usual setting)
- *   12  for 12-bit sample values
- * Only 8 and 12 are legal data precisions for lossy JPEG according to the
- * JPEG standard, and the IJG code does not support anything else!
- * We do not support run-time selection of data precision, sorry.
- */
-
-#define BITS_IN_JSAMPLE  8	/* use 8 or 12 */
-
-
-/*
- * Maximum number of components (color channels) allowed in JPEG image.
- * To meet the letter of the JPEG spec, set this to 255.  However, darn
- * few applications need more than 4 channels (maybe 5 for CMYK + alpha
- * mask).  We recommend 10 as a reasonable compromise; use 4 if you are
- * really short on memory.  (Each allowed component costs a hundred or so
- * bytes of storage, whether actually used in an image or not.)
- */
-
-#define MAX_COMPONENTS  10	/* maximum number of image components */
-
-
-/*
- * Basic data types.
- * You may need to change these if you have a machine with unusual data
- * type sizes; for example, "char" not 8 bits, "short" not 16 bits,
- * or "long" not 32 bits.  We don't care whether "int" is 16 or 32 bits,
- * but it had better be at least 16.
- */
-
-/* Representation of a single sample (pixel element value).
- * We frequently allocate large arrays of these, so it's important to keep
- * them small.  But if you have memory to burn and access to char or short
- * arrays is very slow on your hardware, you might want to change these.
- */
-
-#if BITS_IN_JSAMPLE == 8
-/* JSAMPLE should be the smallest type that will hold the values 0..255.
- * You can use a signed char by having GETJSAMPLE mask it with 0xFF.
- */
-
-#ifdef HAVE_UNSIGNED_CHAR
-
-typedef unsigned char JSAMPLE;
-#define GETJSAMPLE(value)  ((int) (value))
-
-#else /* not HAVE_UNSIGNED_CHAR */
-
-typedef char JSAMPLE;
-#ifdef CHAR_IS_UNSIGNED
-#define GETJSAMPLE(value)  ((int) (value))
-#else
-#define GETJSAMPLE(value)  ((int) (value) & 0xFF)
-#endif /* CHAR_IS_UNSIGNED */
-
-#endif /* HAVE_UNSIGNED_CHAR */
-
-#define MAXJSAMPLE	255
-#define CENTERJSAMPLE	128
-
-#endif /* BITS_IN_JSAMPLE == 8 */
-
-
-#if BITS_IN_JSAMPLE == 12
-/* JSAMPLE should be the smallest type that will hold the values 0..4095.
- * On nearly all machines "short" will do nicely.
- */
-
-typedef short JSAMPLE;
-#define GETJSAMPLE(value)  ((int) (value))
-
-#define MAXJSAMPLE	4095
-#define CENTERJSAMPLE	2048
-
-#endif /* BITS_IN_JSAMPLE == 12 */
-
-
-/* Representation of a DCT frequency coefficient.
- * This should be a signed value of at least 16 bits; "short" is usually OK.
- * Again, we allocate large arrays of these, but you can change to int
- * if you have memory to burn and "short" is really slow.
- */
-
-typedef short JCOEF;
-
-
-/* Compressed datastreams are represented as arrays of JOCTET.
- * These must be EXACTLY 8 bits wide, at least once they are written to
- * external storage.  Note that when using the stdio data source/destination
- * managers, this is also the data type passed to fread/fwrite.
- */
-
-#ifdef HAVE_UNSIGNED_CHAR
-
-typedef unsigned char JOCTET;
-#define GETJOCTET(value)  (value)
-
-#else /* not HAVE_UNSIGNED_CHAR */
-
-typedef char JOCTET;
-#ifdef CHAR_IS_UNSIGNED
-#define GETJOCTET(value)  (value)
-#else
-#define GETJOCTET(value)  ((value) & 0xFF)
-#endif /* CHAR_IS_UNSIGNED */
-
-#endif /* HAVE_UNSIGNED_CHAR */
-
-
-/* These typedefs are used for various table entries and so forth.
- * They must be at least as wide as specified; but making them too big
- * won't cost a huge amount of memory, so we don't provide special
- * extraction code like we did for JSAMPLE.  (In other words, these
- * typedefs live at a different point on the speed/space tradeoff curve.)
- */
-
-/* UINT8 must hold at least the values 0..255. */
-
-#ifdef HAVE_UNSIGNED_CHAR
-typedef unsigned char UINT8;
-#else /* not HAVE_UNSIGNED_CHAR */
-#ifdef CHAR_IS_UNSIGNED
-typedef char UINT8;
-#else /* not CHAR_IS_UNSIGNED */
-typedef short UINT8;
-#endif /* CHAR_IS_UNSIGNED */
-#endif /* HAVE_UNSIGNED_CHAR */
-
-/* UINT16 must hold at least the values 0..65535. */
-
-#ifdef HAVE_UNSIGNED_SHORT
-typedef unsigned short UINT16;
-#else /* not HAVE_UNSIGNED_SHORT */
-typedef unsigned int UINT16;
-#endif /* HAVE_UNSIGNED_SHORT */
-
-/* INT16 must hold at least the values -32768..32767. */
-
-#ifndef XMD_H			/* X11/xmd.h correctly defines INT16 */
-typedef short INT16;
-#endif
-
-/* INT32 must hold at least signed 32-bit values. */
-
-#ifndef XMD_H			/* X11/xmd.h correctly defines INT32 */
-#ifndef _BASETSD_H_		/* Microsoft defines it in basetsd.h */
-#ifndef QGLOBAL_H		/* Qt defines it in qglobal.h */
-typedef long INT32;
-#endif
-#endif
-#endif
-
-/* Datatype used for image dimensions.  The JPEG standard only supports
- * images up to 64K*64K due to 16-bit fields in SOF markers.  Therefore
- * "unsigned int" is sufficient on all machines.  However, if you need to
- * handle larger images and you don't mind deviating from the spec, you
- * can change this datatype.
- */
-
-typedef unsigned int JDIMENSION;
-
-#define JPEG_MAX_DIMENSION  65500L  /* a tad under 64K to prevent overflows */
-
-
-/* These macros are used in all function definitions and extern declarations.
- * You could modify them if you need to change function linkage conventions;
- * in particular, you'll need to do that to make the library a Windows DLL.
- * Another application is to make all functions global for use with debuggers
- * or code profilers that require it.
- */
-
-/* a function called through method pointers: */
-#define METHODDEF(type)		static type
-/* a function used only in its module: */
-#define LOCAL(type)		static type
-/* a function referenced thru EXTERNs: */
-#define GLOBAL(type)		type
-/* a reference to a GLOBAL function: */
-#define EXTERN(type)		extern type
-
-
-/* This macro is used to declare a "method", that is, a function pointer.
- * We want to supply prototype parameters if the compiler can cope.
- * Note that the arglist parameter must be parenthesized!
- * Again, you can customize this if you need special linkage keywords.
- */
-
-#ifdef HAVE_PROTOTYPES
-#define JMETHOD(type,methodname,arglist)  type (*methodname) arglist
-#else
-#define JMETHOD(type,methodname,arglist)  type (*methodname) ()
-#endif
-
-
-/* Here is the pseudo-keyword for declaring pointers that must be "far"
- * on 80x86 machines.  Most of the specialized coding for 80x86 is handled
- * by just saying "FAR *" where such a pointer is needed.  In a few places
- * explicit coding is needed; see uses of the NEED_FAR_POINTERS symbol.
- */
-
-#ifndef FAR
-#ifdef NEED_FAR_POINTERS
-#define FAR  far
-#else
-#define FAR
-#endif
-#endif
-
-
-/*
- * On a few systems, type boolean and/or its values FALSE, TRUE may appear
- * in standard header files.  Or you may have conflicts with application-
- * specific header files that you want to include together with these files.
- * Defining HAVE_BOOLEAN before including jpeglib.h should make it work.
- */
-
-#ifndef HAVE_BOOLEAN
-typedef int boolean;
-#endif
-#ifndef FALSE			/* in case these macros already exist */
-#define FALSE	0		/* values of boolean */
-#endif
-#ifndef TRUE
-#define TRUE	1
-#endif
-
-
-/*
- * The remaining options affect code selection within the JPEG library,
- * but they don't need to be visible to most applications using the library.
- * To minimize application namespace pollution, the symbols won't be
- * defined unless JPEG_INTERNALS or JPEG_INTERNAL_OPTIONS has been defined.
- */
-
-#ifdef JPEG_INTERNALS
-#define JPEG_INTERNAL_OPTIONS
-#endif
-
-#ifdef JPEG_INTERNAL_OPTIONS
-
-
-/*
- * These defines indicate whether to include various optional functions.
- * Undefining some of these symbols will produce a smaller but less capable
- * library.  Note that you can leave certain source files out of the
- * compilation/linking process if you've #undef'd the corresponding symbols.
- * (You may HAVE to do that if your compiler doesn't like null source files.)
- */
-
-/* Capability options common to encoder and decoder: */
-
-#define DCT_ISLOW_SUPPORTED	/* slow but accurate integer algorithm */
-#define DCT_IFAST_SUPPORTED	/* faster, less accurate integer method */
-#define DCT_FLOAT_SUPPORTED	/* floating-point: accurate, fast on fast HW */
-
-/* Encoder capability options: */
-
-#define C_ARITH_CODING_SUPPORTED    /* Arithmetic coding back end? */
-#define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
-#define C_PROGRESSIVE_SUPPORTED	    /* Progressive JPEG? (Requires MULTISCAN)*/
-#define DCT_SCALING_SUPPORTED	    /* Input rescaling via DCT? (Requires DCT_ISLOW)*/
-#define ENTROPY_OPT_SUPPORTED	    /* Optimization of entropy coding parms? */
-/* Note: if you selected 12-bit data precision, it is dangerous to turn off
- * ENTROPY_OPT_SUPPORTED.  The standard Huffman tables are only good for 8-bit
- * precision, so jchuff.c normally uses entropy optimization to compute
- * usable tables for higher precision.  If you don't want to do optimization,
- * you'll have to supply different default Huffman tables.
- * The exact same statements apply for progressive JPEG: the default tables
- * don't work for progressive mode.  (This may get fixed, however.)
- */
-#define INPUT_SMOOTHING_SUPPORTED   /* Input image smoothing option? */
-
-/* Decoder capability options: */
-
-#define D_ARITH_CODING_SUPPORTED    /* Arithmetic coding back end? */
-#define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
-#define D_PROGRESSIVE_SUPPORTED	    /* Progressive JPEG? (Requires MULTISCAN)*/
-#define IDCT_SCALING_SUPPORTED	    /* Output rescaling via IDCT? */
-#define SAVE_MARKERS_SUPPORTED	    /* jpeg_save_markers() needed? */
-#define BLOCK_SMOOTHING_SUPPORTED   /* Block smoothing? (Progressive only) */
-#undef  UPSAMPLE_SCALING_SUPPORTED  /* Output rescaling at upsample stage? */
-#define UPSAMPLE_MERGING_SUPPORTED  /* Fast path for sloppy upsampling? */
-#define QUANT_1PASS_SUPPORTED	    /* 1-pass color quantization? */
-#define QUANT_2PASS_SUPPORTED	    /* 2-pass color quantization? */
-
-/* more capability options later, no doubt */
-
-
-/*
- * Ordering of RGB data in scanlines passed to or from the application.
- * If your application wants to deal with data in the order B,G,R, just
- * change these macros.  You can also deal with formats such as R,G,B,X
- * (one extra byte per pixel) by changing RGB_PIXELSIZE.  Note that changing
- * the offsets will also change the order in which colormap data is organized.
- * RESTRICTIONS:
- * 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats.
- * 2. These macros only affect RGB<=>YCbCr color conversion, so they are not
- *    useful if you are using JPEG color spaces other than YCbCr or grayscale.
- * 3. The color quantizer modules will not behave desirably if RGB_PIXELSIZE
- *    is not 3 (they don't understand about dummy color components!).  So you
- *    can't use color quantization if you change that value.
- */
-
-#define RGB_RED		0	/* Offset of Red in an RGB scanline element */
-#define RGB_GREEN	1	/* Offset of Green */
-#define RGB_BLUE	2	/* Offset of Blue */
-#define RGB_PIXELSIZE	3	/* JSAMPLEs per RGB scanline element */
-
-
-/* Definitions for speed-related optimizations. */
-
-
-/* If your compiler supports inline functions, define INLINE
- * as the inline keyword; otherwise define it as empty.
- */
-
-#ifndef INLINE
-#ifdef __GNUC__			/* for instance, GNU C knows about inline */
-#define INLINE __inline__
-#endif
-#ifndef INLINE
-#define INLINE			/* default is to define it as empty */
-#endif
-#endif
-
-
-/* On some machines (notably 68000 series) "int" is 32 bits, but multiplying
- * two 16-bit shorts is faster than multiplying two ints.  Define MULTIPLIER
- * as short on such a machine.  MULTIPLIER must be at least 16 bits wide.
- */
-
-#ifndef MULTIPLIER
-#define MULTIPLIER  int		/* type for fastest integer multiply */
-#endif
-
-
-/* FAST_FLOAT should be either float or double, whichever is done faster
- * by your compiler.  (Note that this type is only used in the floating point
- * DCT routines, so it only matters if you've defined DCT_FLOAT_SUPPORTED.)
- * Typically, float is faster in ANSI C compilers, while double is faster in
- * pre-ANSI compilers (because they insist on converting to double anyway).
- * The code below therefore chooses float if we have ANSI-style prototypes.
- */
-
-#ifndef FAST_FLOAT
-#ifdef HAVE_PROTOTYPES
-#define FAST_FLOAT  float
-#else
-#define FAST_FLOAT  double
-#endif
-#endif
-
-#endif /* JPEG_INTERNAL_OPTIONS */

data/src/jpeg-7/jpegint.h

@@ -1,395 +0,0 @@
-/*
- * jpegint.h
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 1997-2009 by Guido Vollbeding.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file provides common declarations for the various JPEG modules.
- * These declarations are considered internal to the JPEG library; most
- * applications using the library shouldn't need to include this file.
- */
-
-
-/* Declarations for both compression & decompression */
-
-typedef enum {			/* Operating modes for buffer controllers */
-	JBUF_PASS_THRU,		/* Plain stripwise operation */
-	/* Remaining modes require a full-image buffer to have been created */
-	JBUF_SAVE_SOURCE,	/* Run source subobject only, save output */
-	JBUF_CRANK_DEST,	/* Run dest subobject only, using saved data */
-	JBUF_SAVE_AND_PASS	/* Run both subobjects, save output */
-} J_BUF_MODE;
-
-/* Values of global_state field (jdapi.c has some dependencies on ordering!) */
-#define CSTATE_START	100	/* after create_compress */
-#define CSTATE_SCANNING	101	/* start_compress done, write_scanlines OK */
-#define CSTATE_RAW_OK	102	/* start_compress done, write_raw_data OK */
-#define CSTATE_WRCOEFS	103	/* jpeg_write_coefficients done */
-#define DSTATE_START	200	/* after create_decompress */
-#define DSTATE_INHEADER	201	/* reading header markers, no SOS yet */
-#define DSTATE_READY	202	/* found SOS, ready for start_decompress */
-#define DSTATE_PRELOAD	203	/* reading multiscan file in start_decompress*/
-#define DSTATE_PRESCAN	204	/* performing dummy pass for 2-pass quant */
-#define DSTATE_SCANNING	205	/* start_decompress done, read_scanlines OK */
-#define DSTATE_RAW_OK	206	/* start_decompress done, read_raw_data OK */
-#define DSTATE_BUFIMAGE	207	/* expecting jpeg_start_output */
-#define DSTATE_BUFPOST	208	/* looking for SOS/EOI in jpeg_finish_output */
-#define DSTATE_RDCOEFS	209	/* reading file in jpeg_read_coefficients */
-#define DSTATE_STOPPING	210	/* looking for EOI in jpeg_finish_decompress */
-
-
-/* Declarations for compression modules */
-
-/* Master control module */
-struct jpeg_comp_master {
-  JMETHOD(void, prepare_for_pass, (j_compress_ptr cinfo));
-  JMETHOD(void, pass_startup, (j_compress_ptr cinfo));
-  JMETHOD(void, finish_pass, (j_compress_ptr cinfo));
-
-  /* State variables made visible to other modules */
-  boolean call_pass_startup;	/* True if pass_startup must be called */
-  boolean is_last_pass;		/* True during last pass */
-};
-
-/* Main buffer control (downsampled-data buffer) */
-struct jpeg_c_main_controller {
-  JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode));
-  JMETHOD(void, process_data, (j_compress_ptr cinfo,
-			       JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
-			       JDIMENSION in_rows_avail));
-};
-
-/* Compression preprocessing (downsampling input buffer control) */
-struct jpeg_c_prep_controller {
-  JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode));
-  JMETHOD(void, pre_process_data, (j_compress_ptr cinfo,
-				   JSAMPARRAY input_buf,
-				   JDIMENSION *in_row_ctr,
-				   JDIMENSION in_rows_avail,
-				   JSAMPIMAGE output_buf,
-				   JDIMENSION *out_row_group_ctr,
-				   JDIMENSION out_row_groups_avail));
-};
-
-/* Coefficient buffer control */
-struct jpeg_c_coef_controller {
-  JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode));
-  JMETHOD(boolean, compress_data, (j_compress_ptr cinfo,
-				   JSAMPIMAGE input_buf));
-};
-
-/* Colorspace conversion */
-struct jpeg_color_converter {
-  JMETHOD(void, start_pass, (j_compress_ptr cinfo));
-  JMETHOD(void, color_convert, (j_compress_ptr cinfo,
-				JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
-				JDIMENSION output_row, int num_rows));
-};
-
-/* Downsampling */
-struct jpeg_downsampler {
-  JMETHOD(void, start_pass, (j_compress_ptr cinfo));
-  JMETHOD(void, downsample, (j_compress_ptr cinfo,
-			     JSAMPIMAGE input_buf, JDIMENSION in_row_index,
-			     JSAMPIMAGE output_buf,
-			     JDIMENSION out_row_group_index));
-
-  boolean need_context_rows;	/* TRUE if need rows above & below */
-};
-
-/* Forward DCT (also controls coefficient quantization) */
-typedef JMETHOD(void, forward_DCT_ptr,
-		(j_compress_ptr cinfo, jpeg_component_info * compptr,
-		 JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
-		 JDIMENSION start_row, JDIMENSION start_col,
-		 JDIMENSION num_blocks));
-
-struct jpeg_forward_dct {
-  JMETHOD(void, start_pass, (j_compress_ptr cinfo));
-  /* It is useful to allow each component to have a separate FDCT method. */
-  forward_DCT_ptr forward_DCT[MAX_COMPONENTS];
-};
-
-/* Entropy encoding */
-struct jpeg_entropy_encoder {
-  JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics));
-  JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data));
-  JMETHOD(void, finish_pass, (j_compress_ptr cinfo));
-};
-
-/* Marker writing */
-struct jpeg_marker_writer {
-  JMETHOD(void, write_file_header, (j_compress_ptr cinfo));
-  JMETHOD(void, write_frame_header, (j_compress_ptr cinfo));
-  JMETHOD(void, write_scan_header, (j_compress_ptr cinfo));
-  JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo));
-  JMETHOD(void, write_tables_only, (j_compress_ptr cinfo));
-  /* These routines are exported to allow insertion of extra markers */
-  /* Probably only COM and APPn markers should be written this way */
-  JMETHOD(void, write_marker_header, (j_compress_ptr cinfo, int marker,
-				      unsigned int datalen));
-  JMETHOD(void, write_marker_byte, (j_compress_ptr cinfo, int val));
-};
-
-
-/* Declarations for decompression modules */
-
-/* Master control module */
-struct jpeg_decomp_master {
-  JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo));
-  JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo));
-
-  /* State variables made visible to other modules */
-  boolean is_dummy_pass;	/* True during 1st pass for 2-pass quant */
-};
-
-/* Input control module */
-struct jpeg_input_controller {
-  JMETHOD(int, consume_input, (j_decompress_ptr cinfo));
-  JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo));
-  JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo));
-  JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo));
-
-  /* State variables made visible to other modules */
-  boolean has_multiple_scans;	/* True if file has multiple scans */
-  boolean eoi_reached;		/* True when EOI has been consumed */
-};
-
-/* Main buffer control (downsampled-data buffer) */
-struct jpeg_d_main_controller {
-  JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode));
-  JMETHOD(void, process_data, (j_decompress_ptr cinfo,
-			       JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
-			       JDIMENSION out_rows_avail));
-};
-
-/* Coefficient buffer control */
-struct jpeg_d_coef_controller {
-  JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo));
-  JMETHOD(int, consume_data, (j_decompress_ptr cinfo));
-  JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo));
-  JMETHOD(int, decompress_data, (j_decompress_ptr cinfo,
-				 JSAMPIMAGE output_buf));
-  /* Pointer to array of coefficient virtual arrays, or NULL if none */
-  jvirt_barray_ptr *coef_arrays;
-};
-
-/* Decompression postprocessing (color quantization buffer control) */
-struct jpeg_d_post_controller {
-  JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode));
-  JMETHOD(void, post_process_data, (j_decompress_ptr cinfo,
-				    JSAMPIMAGE input_buf,
-				    JDIMENSION *in_row_group_ctr,
-				    JDIMENSION in_row_groups_avail,
-				    JSAMPARRAY output_buf,
-				    JDIMENSION *out_row_ctr,
-				    JDIMENSION out_rows_avail));
-};
-
-/* Marker reading & parsing */
-struct jpeg_marker_reader {
-  JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo));
-  /* Read markers until SOS or EOI.
-   * Returns same codes as are defined for jpeg_consume_input:
-   * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI.
-   */
-  JMETHOD(int, read_markers, (j_decompress_ptr cinfo));
-  /* Read a restart marker --- exported for use by entropy decoder only */
-  jpeg_marker_parser_method read_restart_marker;
-
-  /* State of marker reader --- nominally internal, but applications
-   * supplying COM or APPn handlers might like to know the state.
-   */
-  boolean saw_SOI;		/* found SOI? */
-  boolean saw_SOF;		/* found SOF? */
-  int next_restart_num;		/* next restart number expected (0-7) */
-  unsigned int discarded_bytes;	/* # of bytes skipped looking for a marker */
-};
-
-/* Entropy decoding */
-struct jpeg_entropy_decoder {
-  JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
-  JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo,
-				JBLOCKROW *MCU_data));
-
-  /* This is here to share code between baseline and progressive decoders; */
-  /* other modules probably should not use it */
-  boolean insufficient_data;	/* set TRUE after emitting warning */
-};
-
-/* Inverse DCT (also performs dequantization) */
-typedef JMETHOD(void, inverse_DCT_method_ptr,
-		(j_decompress_ptr cinfo, jpeg_component_info * compptr,
-		 JCOEFPTR coef_block,
-		 JSAMPARRAY output_buf, JDIMENSION output_col));
-
-struct jpeg_inverse_dct {
-  JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
-  /* It is useful to allow each component to have a separate IDCT method. */
-  inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS];
-};
-
-/* Upsampling (note that upsampler must also call color converter) */
-struct jpeg_upsampler {
-  JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
-  JMETHOD(void, upsample, (j_decompress_ptr cinfo,
-			   JSAMPIMAGE input_buf,
-			   JDIMENSION *in_row_group_ctr,
-			   JDIMENSION in_row_groups_avail,
-			   JSAMPARRAY output_buf,
-			   JDIMENSION *out_row_ctr,
-			   JDIMENSION out_rows_avail));
-
-  boolean need_context_rows;	/* TRUE if need rows above & below */
-};
-
-/* Colorspace conversion */
-struct jpeg_color_deconverter {
-  JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
-  JMETHOD(void, color_convert, (j_decompress_ptr cinfo,
-				JSAMPIMAGE input_buf, JDIMENSION input_row,
-				JSAMPARRAY output_buf, int num_rows));
-};
-
-/* Color quantization or color precision reduction */
-struct jpeg_color_quantizer {
-  JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan));
-  JMETHOD(void, color_quantize, (j_decompress_ptr cinfo,
-				 JSAMPARRAY input_buf, JSAMPARRAY output_buf,
-				 int num_rows));
-  JMETHOD(void, finish_pass, (j_decompress_ptr cinfo));
-  JMETHOD(void, new_color_map, (j_decompress_ptr cinfo));
-};
-
-
-/* Miscellaneous useful macros */
-
-#undef MAX
-#define MAX(a,b)	((a) > (b) ? (a) : (b))
-#undef MIN
-#define MIN(a,b)	((a) < (b) ? (a) : (b))
-
-
-/* We assume that right shift corresponds to signed division by 2 with
- * rounding towards minus infinity.  This is correct for typical "arithmetic
- * shift" instructions that shift in copies of the sign bit.  But some
- * C compilers implement >> with an unsigned shift.  For these machines you
- * must define RIGHT_SHIFT_IS_UNSIGNED.
- * RIGHT_SHIFT provides a proper signed right shift of an INT32 quantity.
- * It is only applied with constant shift counts.  SHIFT_TEMPS must be
- * included in the variables of any routine using RIGHT_SHIFT.
- */
-
-#ifdef RIGHT_SHIFT_IS_UNSIGNED
-#define SHIFT_TEMPS	INT32 shift_temp;
-#define RIGHT_SHIFT(x,shft)  \
-	((shift_temp = (x)) < 0 ? \
-	 (shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \
-	 (shift_temp >> (shft)))
-#else
-#define SHIFT_TEMPS
-#define RIGHT_SHIFT(x,shft)	((x) >> (shft))
-#endif
-
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jinit_compress_master	jICompress
-#define jinit_c_master_control	jICMaster
-#define jinit_c_main_controller	jICMainC
-#define jinit_c_prep_controller	jICPrepC
-#define jinit_c_coef_controller	jICCoefC
-#define jinit_color_converter	jICColor
-#define jinit_downsampler	jIDownsampler
-#define jinit_forward_dct	jIFDCT
-#define jinit_huff_encoder	jIHEncoder
-#define jinit_arith_encoder	jIAEncoder
-#define jinit_marker_writer	jIMWriter
-#define jinit_master_decompress	jIDMaster
-#define jinit_d_main_controller	jIDMainC
-#define jinit_d_coef_controller	jIDCoefC
-#define jinit_d_post_controller	jIDPostC
-#define jinit_input_controller	jIInCtlr
-#define jinit_marker_reader	jIMReader
-#define jinit_huff_decoder	jIHDecoder
-#define jinit_arith_decoder	jIADecoder
-#define jinit_inverse_dct	jIIDCT
-#define jinit_upsampler		jIUpsampler
-#define jinit_color_deconverter	jIDColor
-#define jinit_1pass_quantizer	jI1Quant
-#define jinit_2pass_quantizer	jI2Quant
-#define jinit_merged_upsampler	jIMUpsampler
-#define jinit_memory_mgr	jIMemMgr
-#define jdiv_round_up		jDivRound
-#define jround_up		jRound
-#define jcopy_sample_rows	jCopySamples
-#define jcopy_block_row		jCopyBlocks
-#define jzero_far		jZeroFar
-#define jpeg_zigzag_order	jZIGTable
-#define jpeg_natural_order	jZAGTable
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-
-/* Compression module initialization routines */
-EXTERN(void) jinit_compress_master JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_c_master_control JPP((j_compress_ptr cinfo,
-					 boolean transcode_only));
-EXTERN(void) jinit_c_main_controller JPP((j_compress_ptr cinfo,
-					  boolean need_full_buffer));
-EXTERN(void) jinit_c_prep_controller JPP((j_compress_ptr cinfo,
-					  boolean need_full_buffer));
-EXTERN(void) jinit_c_coef_controller JPP((j_compress_ptr cinfo,
-					  boolean need_full_buffer));
-EXTERN(void) jinit_color_converter JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_arith_encoder JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo));
-/* Decompression module initialization routines */
-EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_d_main_controller JPP((j_decompress_ptr cinfo,
-					  boolean need_full_buffer));
-EXTERN(void) jinit_d_coef_controller JPP((j_decompress_ptr cinfo,
-					  boolean need_full_buffer));
-EXTERN(void) jinit_d_post_controller JPP((j_decompress_ptr cinfo,
-					  boolean need_full_buffer));
-EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_arith_decoder JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_1pass_quantizer JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_2pass_quantizer JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_merged_upsampler JPP((j_decompress_ptr cinfo));
-/* Memory manager initialization */
-EXTERN(void) jinit_memory_mgr JPP((j_common_ptr cinfo));
-
-/* Utility routines in jutils.c */
-EXTERN(long) jdiv_round_up JPP((long a, long b));
-EXTERN(long) jround_up JPP((long a, long b));
-EXTERN(void) jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row,
-				    JSAMPARRAY output_array, int dest_row,
-				    int num_rows, JDIMENSION num_cols));
-EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row,
-				  JDIMENSION num_blocks));
-EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero));
-/* Constant tables in jutils.c */
-#if 0				/* This table is not actually needed in v6a */
-extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */
-#endif
-extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */
-
-/* Suppress undefined-structure complaints if necessary. */
-
-#ifdef INCOMPLETE_TYPES_BROKEN
-#ifndef AM_MEMORY_MANAGER	/* only jmemmgr.c defines these */
-struct jvirt_sarray_control { long dummy; };
-struct jvirt_barray_control { long dummy; };
-#endif
-#endif /* INCOMPLETE_TYPES_BROKEN */