isbn 2.0.4 → 2.0.5

data/src/jpeg-7/jdmarker.c

@@ -1,1360 +0,0 @@
-/*
- * jdmarker.c
- *
- * Copyright (C) 1991-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to decode JPEG datastream markers.
- * Most of the complexity arises from our desire to support input
- * suspension: if not all of the data for a marker is available,
- * we must exit back to the application.  On resumption, we reprocess
- * the marker.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-typedef enum {			/* JPEG marker codes */
-  M_SOF0  = 0xc0,
-  M_SOF1  = 0xc1,
-  M_SOF2  = 0xc2,
-  M_SOF3  = 0xc3,
-  
-  M_SOF5  = 0xc5,
-  M_SOF6  = 0xc6,
-  M_SOF7  = 0xc7,
-  
-  M_JPG   = 0xc8,
-  M_SOF9  = 0xc9,
-  M_SOF10 = 0xca,
-  M_SOF11 = 0xcb,
-  
-  M_SOF13 = 0xcd,
-  M_SOF14 = 0xce,
-  M_SOF15 = 0xcf,
-  
-  M_DHT   = 0xc4,
-  
-  M_DAC   = 0xcc,
-  
-  M_RST0  = 0xd0,
-  M_RST1  = 0xd1,
-  M_RST2  = 0xd2,
-  M_RST3  = 0xd3,
-  M_RST4  = 0xd4,
-  M_RST5  = 0xd5,
-  M_RST6  = 0xd6,
-  M_RST7  = 0xd7,
-  
-  M_SOI   = 0xd8,
-  M_EOI   = 0xd9,
-  M_SOS   = 0xda,
-  M_DQT   = 0xdb,
-  M_DNL   = 0xdc,
-  M_DRI   = 0xdd,
-  M_DHP   = 0xde,
-  M_EXP   = 0xdf,
-  
-  M_APP0  = 0xe0,
-  M_APP1  = 0xe1,
-  M_APP2  = 0xe2,
-  M_APP3  = 0xe3,
-  M_APP4  = 0xe4,
-  M_APP5  = 0xe5,
-  M_APP6  = 0xe6,
-  M_APP7  = 0xe7,
-  M_APP8  = 0xe8,
-  M_APP9  = 0xe9,
-  M_APP10 = 0xea,
-  M_APP11 = 0xeb,
-  M_APP12 = 0xec,
-  M_APP13 = 0xed,
-  M_APP14 = 0xee,
-  M_APP15 = 0xef,
-  
-  M_JPG0  = 0xf0,
-  M_JPG13 = 0xfd,
-  M_COM   = 0xfe,
-  
-  M_TEM   = 0x01,
-  
-  M_ERROR = 0x100
-} JPEG_MARKER;
-
-
-/* Private state */
-
-typedef struct {
-  struct jpeg_marker_reader pub; /* public fields */
-
-  /* Application-overridable marker processing methods */
-  jpeg_marker_parser_method process_COM;
-  jpeg_marker_parser_method process_APPn[16];
-
-  /* Limit on marker data length to save for each marker type */
-  unsigned int length_limit_COM;
-  unsigned int length_limit_APPn[16];
-
-  /* Status of COM/APPn marker saving */
-  jpeg_saved_marker_ptr cur_marker;	/* NULL if not processing a marker */
-  unsigned int bytes_read;		/* data bytes read so far in marker */
-  /* Note: cur_marker is not linked into marker_list until it's all read. */
-} my_marker_reader;
-
-typedef my_marker_reader * my_marker_ptr;
-
-
-/*
- * Macros for fetching data from the data source module.
- *
- * At all times, cinfo->src->next_input_byte and ->bytes_in_buffer reflect
- * the current restart point; we update them only when we have reached a
- * suitable place to restart if a suspension occurs.
- */
-
-/* Declare and initialize local copies of input pointer/count */
-#define INPUT_VARS(cinfo)  \
-	struct jpeg_source_mgr * datasrc = (cinfo)->src;  \
-	const JOCTET * next_input_byte = datasrc->next_input_byte;  \
-	size_t bytes_in_buffer = datasrc->bytes_in_buffer
-
-/* Unload the local copies --- do this only at a restart boundary */
-#define INPUT_SYNC(cinfo)  \
-	( datasrc->next_input_byte = next_input_byte,  \
-	  datasrc->bytes_in_buffer = bytes_in_buffer )
-
-/* Reload the local copies --- used only in MAKE_BYTE_AVAIL */
-#define INPUT_RELOAD(cinfo)  \
-	( next_input_byte = datasrc->next_input_byte,  \
-	  bytes_in_buffer = datasrc->bytes_in_buffer )
-
-/* Internal macro for INPUT_BYTE and INPUT_2BYTES: make a byte available.
- * Note we do *not* do INPUT_SYNC before calling fill_input_buffer,
- * but we must reload the local copies after a successful fill.
- */
-#define MAKE_BYTE_AVAIL(cinfo,action)  \
-	if (bytes_in_buffer == 0) {  \
-	  if (! (*datasrc->fill_input_buffer) (cinfo))  \
-	    { action; }  \
-	  INPUT_RELOAD(cinfo);  \
-	}
-
-/* Read a byte into variable V.
- * If must suspend, take the specified action (typically "return FALSE").
- */
-#define INPUT_BYTE(cinfo,V,action)  \
-	MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \
-		  bytes_in_buffer--; \
-		  V = GETJOCTET(*next_input_byte++); )
-
-/* As above, but read two bytes interpreted as an unsigned 16-bit integer.
- * V should be declared unsigned int or perhaps INT32.
- */
-#define INPUT_2BYTES(cinfo,V,action)  \
-	MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \
-		  bytes_in_buffer--; \
-		  V = ((unsigned int) GETJOCTET(*next_input_byte++)) << 8; \
-		  MAKE_BYTE_AVAIL(cinfo,action); \
-		  bytes_in_buffer--; \
-		  V += GETJOCTET(*next_input_byte++); )
-
-
-/*
- * Routines to process JPEG markers.
- *
- * Entry condition: JPEG marker itself has been read and its code saved
- *   in cinfo->unread_marker; input restart point is just after the marker.
- *
- * Exit: if return TRUE, have read and processed any parameters, and have
- *   updated the restart point to point after the parameters.
- *   If return FALSE, was forced to suspend before reaching end of
- *   marker parameters; restart point has not been moved.  Same routine
- *   will be called again after application supplies more input data.
- *
- * This approach to suspension assumes that all of a marker's parameters
- * can fit into a single input bufferload.  This should hold for "normal"
- * markers.  Some COM/APPn markers might have large parameter segments
- * that might not fit.  If we are simply dropping such a marker, we use
- * skip_input_data to get past it, and thereby put the problem on the
- * source manager's shoulders.  If we are saving the marker's contents
- * into memory, we use a slightly different convention: when forced to
- * suspend, the marker processor updates the restart point to the end of
- * what it's consumed (ie, the end of the buffer) before returning FALSE.
- * On resumption, cinfo->unread_marker still contains the marker code,
- * but the data source will point to the next chunk of marker data.
- * The marker processor must retain internal state to deal with this.
- *
- * Note that we don't bother to avoid duplicate trace messages if a
- * suspension occurs within marker parameters.  Other side effects
- * require more care.
- */
-
-
-LOCAL(boolean)
-get_soi (j_decompress_ptr cinfo)
-/* Process an SOI marker */
-{
-  int i;
-  
-  TRACEMS(cinfo, 1, JTRC_SOI);
-
-  if (cinfo->marker->saw_SOI)
-    ERREXIT(cinfo, JERR_SOI_DUPLICATE);
-
-  /* Reset all parameters that are defined to be reset by SOI */
-
-  for (i = 0; i < NUM_ARITH_TBLS; i++) {
-    cinfo->arith_dc_L[i] = 0;
-    cinfo->arith_dc_U[i] = 1;
-    cinfo->arith_ac_K[i] = 5;
-  }
-  cinfo->restart_interval = 0;
-
-  /* Set initial assumptions for colorspace etc */
-
-  cinfo->jpeg_color_space = JCS_UNKNOWN;
-  cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */
-
-  cinfo->saw_JFIF_marker = FALSE;
-  cinfo->JFIF_major_version = 1; /* set default JFIF APP0 values */
-  cinfo->JFIF_minor_version = 1;
-  cinfo->density_unit = 0;
-  cinfo->X_density = 1;
-  cinfo->Y_density = 1;
-  cinfo->saw_Adobe_marker = FALSE;
-  cinfo->Adobe_transform = 0;
-
-  cinfo->marker->saw_SOI = TRUE;
-
-  return TRUE;
-}
-
-
-LOCAL(boolean)
-get_sof (j_decompress_ptr cinfo, boolean is_prog, boolean is_arith)
-/* Process a SOFn marker */
-{
-  INT32 length;
-  int c, ci;
-  jpeg_component_info * compptr;
-  INPUT_VARS(cinfo);
-
-  cinfo->progressive_mode = is_prog;
-  cinfo->arith_code = is_arith;
-
-  INPUT_2BYTES(cinfo, length, return FALSE);
-
-  INPUT_BYTE(cinfo, cinfo->data_precision, return FALSE);
-  INPUT_2BYTES(cinfo, cinfo->image_height, return FALSE);
-  INPUT_2BYTES(cinfo, cinfo->image_width, return FALSE);
-  INPUT_BYTE(cinfo, cinfo->num_components, return FALSE);
-
-  length -= 8;
-
-  TRACEMS4(cinfo, 1, JTRC_SOF, cinfo->unread_marker,
-	   (int) cinfo->image_width, (int) cinfo->image_height,
-	   cinfo->num_components);
-
-  if (cinfo->marker->saw_SOF)
-    ERREXIT(cinfo, JERR_SOF_DUPLICATE);
-
-  /* We don't support files in which the image height is initially specified */
-  /* as 0 and is later redefined by DNL.  As long as we have to check that,  */
-  /* might as well have a general sanity check. */
-  if (cinfo->image_height <= 0 || cinfo->image_width <= 0
-      || cinfo->num_components <= 0)
-    ERREXIT(cinfo, JERR_EMPTY_IMAGE);
-
-  if (length != (cinfo->num_components * 3))
-    ERREXIT(cinfo, JERR_BAD_LENGTH);
-
-  if (cinfo->comp_info == NULL)	/* do only once, even if suspend */
-    cinfo->comp_info = (jpeg_component_info *) (*cinfo->mem->alloc_small)
-			((j_common_ptr) cinfo, JPOOL_IMAGE,
-			 cinfo->num_components * SIZEOF(jpeg_component_info));
-  
-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-       ci++, compptr++) {
-    compptr->component_index = ci;
-    INPUT_BYTE(cinfo, compptr->component_id, return FALSE);
-    INPUT_BYTE(cinfo, c, return FALSE);
-    compptr->h_samp_factor = (c >> 4) & 15;
-    compptr->v_samp_factor = (c     ) & 15;
-    INPUT_BYTE(cinfo, compptr->quant_tbl_no, return FALSE);
-
-    TRACEMS4(cinfo, 1, JTRC_SOF_COMPONENT,
-	     compptr->component_id, compptr->h_samp_factor,
-	     compptr->v_samp_factor, compptr->quant_tbl_no);
-  }
-
-  cinfo->marker->saw_SOF = TRUE;
-
-  INPUT_SYNC(cinfo);
-  return TRUE;
-}
-
-
-LOCAL(boolean)
-get_sos (j_decompress_ptr cinfo)
-/* Process a SOS marker */
-{
-  INT32 length;
-  int i, ci, n, c, cc;
-  jpeg_component_info * compptr;
-  INPUT_VARS(cinfo);
-
-  if (! cinfo->marker->saw_SOF)
-    ERREXIT(cinfo, JERR_SOS_NO_SOF);
-
-  INPUT_2BYTES(cinfo, length, return FALSE);
-
-  INPUT_BYTE(cinfo, n, return FALSE); /* Number of components */
-
-  TRACEMS1(cinfo, 1, JTRC_SOS, n);
-
-  if (length != (n * 2 + 6) || n < 1 || n > MAX_COMPS_IN_SCAN)
-    ERREXIT(cinfo, JERR_BAD_LENGTH);
-
-  cinfo->comps_in_scan = n;
-
-  /* Collect the component-spec parameters */
-
-  for (i = 0; i < n; i++) {
-    INPUT_BYTE(cinfo, cc, return FALSE);
-    INPUT_BYTE(cinfo, c, return FALSE);
-    
-    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-	 ci++, compptr++) {
-      if (cc == compptr->component_id)
-	goto id_found;
-    }
-
-    ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, cc);
-
-  id_found:
-
-    cinfo->cur_comp_info[i] = compptr;
-    compptr->dc_tbl_no = (c >> 4) & 15;
-    compptr->ac_tbl_no = (c     ) & 15;
-    
-    TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, cc,
-	     compptr->dc_tbl_no, compptr->ac_tbl_no);
-  }
-
-  /* Collect the additional scan parameters Ss, Se, Ah/Al. */
-  INPUT_BYTE(cinfo, c, return FALSE);
-  cinfo->Ss = c;
-  INPUT_BYTE(cinfo, c, return FALSE);
-  cinfo->Se = c;
-  INPUT_BYTE(cinfo, c, return FALSE);
-  cinfo->Ah = (c >> 4) & 15;
-  cinfo->Al = (c     ) & 15;
-
-  TRACEMS4(cinfo, 1, JTRC_SOS_PARAMS, cinfo->Ss, cinfo->Se,
-	   cinfo->Ah, cinfo->Al);
-
-  /* Prepare to scan data & restart markers */
-  cinfo->marker->next_restart_num = 0;
-
-  /* Count another SOS marker */
-  cinfo->input_scan_number++;
-
-  INPUT_SYNC(cinfo);
-  return TRUE;
-}
-
-
-#ifdef D_ARITH_CODING_SUPPORTED
-
-LOCAL(boolean)
-get_dac (j_decompress_ptr cinfo)
-/* Process a DAC marker */
-{
-  INT32 length;
-  int index, val;
-  INPUT_VARS(cinfo);
-
-  INPUT_2BYTES(cinfo, length, return FALSE);
-  length -= 2;
-  
-  while (length > 0) {
-    INPUT_BYTE(cinfo, index, return FALSE);
-    INPUT_BYTE(cinfo, val, return FALSE);
-
-    length -= 2;
-
-    TRACEMS2(cinfo, 1, JTRC_DAC, index, val);
-
-    if (index < 0 || index >= (2*NUM_ARITH_TBLS))
-      ERREXIT1(cinfo, JERR_DAC_INDEX, index);
-
-    if (index >= NUM_ARITH_TBLS) { /* define AC table */
-      cinfo->arith_ac_K[index-NUM_ARITH_TBLS] = (UINT8) val;
-    } else {			/* define DC table */
-      cinfo->arith_dc_L[index] = (UINT8) (val & 0x0F);
-      cinfo->arith_dc_U[index] = (UINT8) (val >> 4);
-      if (cinfo->arith_dc_L[index] > cinfo->arith_dc_U[index])
-	ERREXIT1(cinfo, JERR_DAC_VALUE, val);
-    }
-  }
-
-  if (length != 0)
-    ERREXIT(cinfo, JERR_BAD_LENGTH);
-
-  INPUT_SYNC(cinfo);
-  return TRUE;
-}
-
-#else /* ! D_ARITH_CODING_SUPPORTED */
-
-#define get_dac(cinfo)  skip_variable(cinfo)
-
-#endif /* D_ARITH_CODING_SUPPORTED */
-
-
-LOCAL(boolean)
-get_dht (j_decompress_ptr cinfo)
-/* Process a DHT marker */
-{
-  INT32 length;
-  UINT8 bits[17];
-  UINT8 huffval[256];
-  int i, index, count;
-  JHUFF_TBL **htblptr;
-  INPUT_VARS(cinfo);
-
-  INPUT_2BYTES(cinfo, length, return FALSE);
-  length -= 2;
-  
-  while (length > 16) {
-    INPUT_BYTE(cinfo, index, return FALSE);
-
-    TRACEMS1(cinfo, 1, JTRC_DHT, index);
-      
-    bits[0] = 0;
-    count = 0;
-    for (i = 1; i <= 16; i++) {
-      INPUT_BYTE(cinfo, bits[i], return FALSE);
-      count += bits[i];
-    }
-
-    length -= 1 + 16;
-
-    TRACEMS8(cinfo, 2, JTRC_HUFFBITS,
-	     bits[1], bits[2], bits[3], bits[4],
-	     bits[5], bits[6], bits[7], bits[8]);
-    TRACEMS8(cinfo, 2, JTRC_HUFFBITS,
-	     bits[9], bits[10], bits[11], bits[12],
-	     bits[13], bits[14], bits[15], bits[16]);
-
-    /* Here we just do minimal validation of the counts to avoid walking
-     * off the end of our table space.  jdhuff.c will check more carefully.
-     */
-    if (count > 256 || ((INT32) count) > length)
-      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
-
-    for (i = 0; i < count; i++)
-      INPUT_BYTE(cinfo, huffval[i], return FALSE);
-
-    length -= count;
-
-    if (index & 0x10) {		/* AC table definition */
-      index -= 0x10;
-      htblptr = &cinfo->ac_huff_tbl_ptrs[index];
-    } else {			/* DC table definition */
-      htblptr = &cinfo->dc_huff_tbl_ptrs[index];
-    }
-
-    if (index < 0 || index >= NUM_HUFF_TBLS)
-      ERREXIT1(cinfo, JERR_DHT_INDEX, index);
-
-    if (*htblptr == NULL)
-      *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
-  
-    MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits));
-    MEMCOPY((*htblptr)->huffval, huffval, SIZEOF((*htblptr)->huffval));
-  }
-
-  if (length != 0)
-    ERREXIT(cinfo, JERR_BAD_LENGTH);
-
-  INPUT_SYNC(cinfo);
-  return TRUE;
-}
-
-
-LOCAL(boolean)
-get_dqt (j_decompress_ptr cinfo)
-/* Process a DQT marker */
-{
-  INT32 length;
-  int n, i, prec;
-  unsigned int tmp;
-  JQUANT_TBL *quant_ptr;
-  INPUT_VARS(cinfo);
-
-  INPUT_2BYTES(cinfo, length, return FALSE);
-  length -= 2;
-
-  while (length > 0) {
-    INPUT_BYTE(cinfo, n, return FALSE);
-    prec = n >> 4;
-    n &= 0x0F;
-
-    TRACEMS2(cinfo, 1, JTRC_DQT, n, prec);
-
-    if (n >= NUM_QUANT_TBLS)
-      ERREXIT1(cinfo, JERR_DQT_INDEX, n);
-      
-    if (cinfo->quant_tbl_ptrs[n] == NULL)
-      cinfo->quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) cinfo);
-    quant_ptr = cinfo->quant_tbl_ptrs[n];
-
-    for (i = 0; i < DCTSIZE2; i++) {
-      if (prec)
-	INPUT_2BYTES(cinfo, tmp, return FALSE);
-      else
-	INPUT_BYTE(cinfo, tmp, return FALSE);
-      /* We convert the zigzag-order table to natural array order. */
-      quant_ptr->quantval[jpeg_natural_order[i]] = (UINT16) tmp;
-    }
-
-    if (cinfo->err->trace_level >= 2) {
-      for (i = 0; i < DCTSIZE2; i += 8) {
-	TRACEMS8(cinfo, 2, JTRC_QUANTVALS,
-		 quant_ptr->quantval[i],   quant_ptr->quantval[i+1],
-		 quant_ptr->quantval[i+2], quant_ptr->quantval[i+3],
-		 quant_ptr->quantval[i+4], quant_ptr->quantval[i+5],
-		 quant_ptr->quantval[i+6], quant_ptr->quantval[i+7]);
-      }
-    }
-
-    length -= DCTSIZE2+1;
-    if (prec) length -= DCTSIZE2;
-  }
-
-  if (length != 0)
-    ERREXIT(cinfo, JERR_BAD_LENGTH);
-
-  INPUT_SYNC(cinfo);
-  return TRUE;
-}
-
-
-LOCAL(boolean)
-get_dri (j_decompress_ptr cinfo)
-/* Process a DRI marker */
-{
-  INT32 length;
-  unsigned int tmp;
-  INPUT_VARS(cinfo);
-
-  INPUT_2BYTES(cinfo, length, return FALSE);
-  
-  if (length != 4)
-    ERREXIT(cinfo, JERR_BAD_LENGTH);
-
-  INPUT_2BYTES(cinfo, tmp, return FALSE);
-
-  TRACEMS1(cinfo, 1, JTRC_DRI, tmp);
-
-  cinfo->restart_interval = tmp;
-
-  INPUT_SYNC(cinfo);
-  return TRUE;
-}
-
-
-/*
- * Routines for processing APPn and COM markers.
- * These are either saved in memory or discarded, per application request.
- * APP0 and APP14 are specially checked to see if they are
- * JFIF and Adobe markers, respectively.
- */
-
-#define APP0_DATA_LEN	14	/* Length of interesting data in APP0 */
-#define APP14_DATA_LEN	12	/* Length of interesting data in APP14 */
-#define APPN_DATA_LEN	14	/* Must be the largest of the above!! */
-
-
-LOCAL(void)
-examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data,
-	      unsigned int datalen, INT32 remaining)
-/* Examine first few bytes from an APP0.
- * Take appropriate action if it is a JFIF marker.
- * datalen is # of bytes at data[], remaining is length of rest of marker data.
- */
-{
-  INT32 totallen = (INT32) datalen + remaining;
-
-  if (datalen >= APP0_DATA_LEN &&
-      GETJOCTET(data[0]) == 0x4A &&
-      GETJOCTET(data[1]) == 0x46 &&
-      GETJOCTET(data[2]) == 0x49 &&
-      GETJOCTET(data[3]) == 0x46 &&
-      GETJOCTET(data[4]) == 0) {
-    /* Found JFIF APP0 marker: save info */
-    cinfo->saw_JFIF_marker = TRUE;
-    cinfo->JFIF_major_version = GETJOCTET(data[5]);
-    cinfo->JFIF_minor_version = GETJOCTET(data[6]);
-    cinfo->density_unit = GETJOCTET(data[7]);
-    cinfo->X_density = (GETJOCTET(data[8]) << 8) + GETJOCTET(data[9]);
-    cinfo->Y_density = (GETJOCTET(data[10]) << 8) + GETJOCTET(data[11]);
-    /* Check version.
-     * Major version must be 1, anything else signals an incompatible change.
-     * (We used to treat this as an error, but now it's a nonfatal warning,
-     * because some bozo at Hijaak couldn't read the spec.)
-     * Minor version should be 0..2, but process anyway if newer.
-     */
-    if (cinfo->JFIF_major_version != 1)
-      WARNMS2(cinfo, JWRN_JFIF_MAJOR,
-	      cinfo->JFIF_major_version, cinfo->JFIF_minor_version);
-    /* Generate trace messages */
-    TRACEMS5(cinfo, 1, JTRC_JFIF,
-	     cinfo->JFIF_major_version, cinfo->JFIF_minor_version,
-	     cinfo->X_density, cinfo->Y_density, cinfo->density_unit);
-    /* Validate thumbnail dimensions and issue appropriate messages */
-    if (GETJOCTET(data[12]) | GETJOCTET(data[13]))
-      TRACEMS2(cinfo, 1, JTRC_JFIF_THUMBNAIL,
-	       GETJOCTET(data[12]), GETJOCTET(data[13]));
-    totallen -= APP0_DATA_LEN;
-    if (totallen !=
-	((INT32)GETJOCTET(data[12]) * (INT32)GETJOCTET(data[13]) * (INT32) 3))
-      TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) totallen);
-  } else if (datalen >= 6 &&
-      GETJOCTET(data[0]) == 0x4A &&
-      GETJOCTET(data[1]) == 0x46 &&
-      GETJOCTET(data[2]) == 0x58 &&
-      GETJOCTET(data[3]) == 0x58 &&
-      GETJOCTET(data[4]) == 0) {
-    /* Found JFIF "JFXX" extension APP0 marker */
-    /* The library doesn't actually do anything with these,
-     * but we try to produce a helpful trace message.
-     */
-    switch (GETJOCTET(data[5])) {
-    case 0x10:
-      TRACEMS1(cinfo, 1, JTRC_THUMB_JPEG, (int) totallen);
-      break;
-    case 0x11:
-      TRACEMS1(cinfo, 1, JTRC_THUMB_PALETTE, (int) totallen);
-      break;
-    case 0x13:
-      TRACEMS1(cinfo, 1, JTRC_THUMB_RGB, (int) totallen);
-      break;
-    default:
-      TRACEMS2(cinfo, 1, JTRC_JFIF_EXTENSION,
-	       GETJOCTET(data[5]), (int) totallen);
-      break;
-    }
-  } else {
-    /* Start of APP0 does not match "JFIF" or "JFXX", or too short */
-    TRACEMS1(cinfo, 1, JTRC_APP0, (int) totallen);
-  }
-}
-
-
-LOCAL(void)
-examine_app14 (j_decompress_ptr cinfo, JOCTET FAR * data,
-	       unsigned int datalen, INT32 remaining)
-/* Examine first few bytes from an APP14.
- * Take appropriate action if it is an Adobe marker.
- * datalen is # of bytes at data[], remaining is length of rest of marker data.
- */
-{
-  unsigned int version, flags0, flags1, transform;
-
-  if (datalen >= APP14_DATA_LEN &&
-      GETJOCTET(data[0]) == 0x41 &&
-      GETJOCTET(data[1]) == 0x64 &&
-      GETJOCTET(data[2]) == 0x6F &&
-      GETJOCTET(data[3]) == 0x62 &&
-      GETJOCTET(data[4]) == 0x65) {
-    /* Found Adobe APP14 marker */
-    version = (GETJOCTET(data[5]) << 8) + GETJOCTET(data[6]);
-    flags0 = (GETJOCTET(data[7]) << 8) + GETJOCTET(data[8]);
-    flags1 = (GETJOCTET(data[9]) << 8) + GETJOCTET(data[10]);
-    transform = GETJOCTET(data[11]);
-    TRACEMS4(cinfo, 1, JTRC_ADOBE, version, flags0, flags1, transform);
-    cinfo->saw_Adobe_marker = TRUE;
-    cinfo->Adobe_transform = (UINT8) transform;
-  } else {
-    /* Start of APP14 does not match "Adobe", or too short */
-    TRACEMS1(cinfo, 1, JTRC_APP14, (int) (datalen + remaining));
-  }
-}
-
-
-METHODDEF(boolean)
-get_interesting_appn (j_decompress_ptr cinfo)
-/* Process an APP0 or APP14 marker without saving it */
-{
-  INT32 length;
-  JOCTET b[APPN_DATA_LEN];
-  unsigned int i, numtoread;
-  INPUT_VARS(cinfo);
-
-  INPUT_2BYTES(cinfo, length, return FALSE);
-  length -= 2;
-
-  /* get the interesting part of the marker data */
-  if (length >= APPN_DATA_LEN)
-    numtoread = APPN_DATA_LEN;
-  else if (length > 0)
-    numtoread = (unsigned int) length;
-  else
-    numtoread = 0;
-  for (i = 0; i < numtoread; i++)
-    INPUT_BYTE(cinfo, b[i], return FALSE);
-  length -= numtoread;
-
-  /* process it */
-  switch (cinfo->unread_marker) {
-  case M_APP0:
-    examine_app0(cinfo, (JOCTET FAR *) b, numtoread, length);
-    break;
-  case M_APP14:
-    examine_app14(cinfo, (JOCTET FAR *) b, numtoread, length);
-    break;
-  default:
-    /* can't get here unless jpeg_save_markers chooses wrong processor */
-    ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker);
-    break;
-  }
-
-  /* skip any remaining data -- could be lots */
-  INPUT_SYNC(cinfo);
-  if (length > 0)
-    (*cinfo->src->skip_input_data) (cinfo, (long) length);
-
-  return TRUE;
-}
-
-
-#ifdef SAVE_MARKERS_SUPPORTED
-
-METHODDEF(boolean)
-save_marker (j_decompress_ptr cinfo)
-/* Save an APPn or COM marker into the marker list */
-{
-  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
-  jpeg_saved_marker_ptr cur_marker = marker->cur_marker;
-  unsigned int bytes_read, data_length;
-  JOCTET FAR * data;
-  INT32 length = 0;
-  INPUT_VARS(cinfo);
-
-  if (cur_marker == NULL) {
-    /* begin reading a marker */
-    INPUT_2BYTES(cinfo, length, return FALSE);
-    length -= 2;
-    if (length >= 0) {		/* watch out for bogus length word */
-      /* figure out how much we want to save */
-      unsigned int limit;
-      if (cinfo->unread_marker == (int) M_COM)
-	limit = marker->length_limit_COM;
-      else
-	limit = marker->length_limit_APPn[cinfo->unread_marker - (int) M_APP0];
-      if ((unsigned int) length < limit)
-	limit = (unsigned int) length;
-      /* allocate and initialize the marker item */
-      cur_marker = (jpeg_saved_marker_ptr)
-	(*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				    SIZEOF(struct jpeg_marker_struct) + limit);
-      cur_marker->next = NULL;
-      cur_marker->marker = (UINT8) cinfo->unread_marker;
-      cur_marker->original_length = (unsigned int) length;
-      cur_marker->data_length = limit;
-      /* data area is just beyond the jpeg_marker_struct */
-      data = cur_marker->data = (JOCTET FAR *) (cur_marker + 1);
-      marker->cur_marker = cur_marker;
-      marker->bytes_read = 0;
-      bytes_read = 0;
-      data_length = limit;
-    } else {
-      /* deal with bogus length word */
-      bytes_read = data_length = 0;
-      data = NULL;
-    }
-  } else {
-    /* resume reading a marker */
-    bytes_read = marker->bytes_read;
-    data_length = cur_marker->data_length;
-    data = cur_marker->data + bytes_read;
-  }
-
-  while (bytes_read < data_length) {
-    INPUT_SYNC(cinfo);		/* move the restart point to here */
-    marker->bytes_read = bytes_read;
-    /* If there's not at least one byte in buffer, suspend */
-    MAKE_BYTE_AVAIL(cinfo, return FALSE);
-    /* Copy bytes with reasonable rapidity */
-    while (bytes_read < data_length && bytes_in_buffer > 0) {
-      *data++ = *next_input_byte++;
-      bytes_in_buffer--;
-      bytes_read++;
-    }
-  }
-
-  /* Done reading what we want to read */
-  if (cur_marker != NULL) {	/* will be NULL if bogus length word */
-    /* Add new marker to end of list */
-    if (cinfo->marker_list == NULL) {
-      cinfo->marker_list = cur_marker;
-    } else {
-      jpeg_saved_marker_ptr prev = cinfo->marker_list;
-      while (prev->next != NULL)
-	prev = prev->next;
-      prev->next = cur_marker;
-    }
-    /* Reset pointer & calc remaining data length */
-    data = cur_marker->data;
-    length = cur_marker->original_length - data_length;
-  }
-  /* Reset to initial state for next marker */
-  marker->cur_marker = NULL;
-
-  /* Process the marker if interesting; else just make a generic trace msg */
-  switch (cinfo->unread_marker) {
-  case M_APP0:
-    examine_app0(cinfo, data, data_length, length);
-    break;
-  case M_APP14:
-    examine_app14(cinfo, data, data_length, length);
-    break;
-  default:
-    TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker,
-	     (int) (data_length + length));
-    break;
-  }
-
-  /* skip any remaining data -- could be lots */
-  INPUT_SYNC(cinfo);		/* do before skip_input_data */
-  if (length > 0)
-    (*cinfo->src->skip_input_data) (cinfo, (long) length);
-
-  return TRUE;
-}
-
-#endif /* SAVE_MARKERS_SUPPORTED */
-
-
-METHODDEF(boolean)
-skip_variable (j_decompress_ptr cinfo)
-/* Skip over an unknown or uninteresting variable-length marker */
-{
-  INT32 length;
-  INPUT_VARS(cinfo);
-
-  INPUT_2BYTES(cinfo, length, return FALSE);
-  length -= 2;
-  
-  TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, (int) length);
-
-  INPUT_SYNC(cinfo);		/* do before skip_input_data */
-  if (length > 0)
-    (*cinfo->src->skip_input_data) (cinfo, (long) length);
-
-  return TRUE;
-}
-
-
-/*
- * Find the next JPEG marker, save it in cinfo->unread_marker.
- * Returns FALSE if had to suspend before reaching a marker;
- * in that case cinfo->unread_marker is unchanged.
- *
- * Note that the result might not be a valid marker code,
- * but it will never be 0 or FF.
- */
-
-LOCAL(boolean)
-next_marker (j_decompress_ptr cinfo)
-{
-  int c;
-  INPUT_VARS(cinfo);
-
-  for (;;) {
-    INPUT_BYTE(cinfo, c, return FALSE);
-    /* Skip any non-FF bytes.
-     * This may look a bit inefficient, but it will not occur in a valid file.
-     * We sync after each discarded byte so that a suspending data source
-     * can discard the byte from its buffer.
-     */
-    while (c != 0xFF) {
-      cinfo->marker->discarded_bytes++;
-      INPUT_SYNC(cinfo);
-      INPUT_BYTE(cinfo, c, return FALSE);
-    }
-    /* This loop swallows any duplicate FF bytes.  Extra FFs are legal as
-     * pad bytes, so don't count them in discarded_bytes.  We assume there
-     * will not be so many consecutive FF bytes as to overflow a suspending
-     * data source's input buffer.
-     */
-    do {
-      INPUT_BYTE(cinfo, c, return FALSE);
-    } while (c == 0xFF);
-    if (c != 0)
-      break;			/* found a valid marker, exit loop */
-    /* Reach here if we found a stuffed-zero data sequence (FF/00).
-     * Discard it and loop back to try again.
-     */
-    cinfo->marker->discarded_bytes += 2;
-    INPUT_SYNC(cinfo);
-  }
-
-  if (cinfo->marker->discarded_bytes != 0) {
-    WARNMS2(cinfo, JWRN_EXTRANEOUS_DATA, cinfo->marker->discarded_bytes, c);
-    cinfo->marker->discarded_bytes = 0;
-  }
-
-  cinfo->unread_marker = c;
-
-  INPUT_SYNC(cinfo);
-  return TRUE;
-}
-
-
-LOCAL(boolean)
-first_marker (j_decompress_ptr cinfo)
-/* Like next_marker, but used to obtain the initial SOI marker. */
-/* For this marker, we do not allow preceding garbage or fill; otherwise,
- * we might well scan an entire input file before realizing it ain't JPEG.
- * If an application wants to process non-JFIF files, it must seek to the
- * SOI before calling the JPEG library.
- */
-{
-  int c, c2;
-  INPUT_VARS(cinfo);
-
-  INPUT_BYTE(cinfo, c, return FALSE);
-  INPUT_BYTE(cinfo, c2, return FALSE);
-  if (c != 0xFF || c2 != (int) M_SOI)
-    ERREXIT2(cinfo, JERR_NO_SOI, c, c2);
-
-  cinfo->unread_marker = c2;
-
-  INPUT_SYNC(cinfo);
-  return TRUE;
-}
-
-
-/*
- * Read markers until SOS or EOI.
- *
- * Returns same codes as are defined for jpeg_consume_input:
- * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI.
- */
-
-METHODDEF(int)
-read_markers (j_decompress_ptr cinfo)
-{
-  /* Outer loop repeats once for each marker. */
-  for (;;) {
-    /* Collect the marker proper, unless we already did. */
-    /* NB: first_marker() enforces the requirement that SOI appear first. */
-    if (cinfo->unread_marker == 0) {
-      if (! cinfo->marker->saw_SOI) {
-	if (! first_marker(cinfo))
-	  return JPEG_SUSPENDED;
-      } else {
-	if (! next_marker(cinfo))
-	  return JPEG_SUSPENDED;
-      }
-    }
-    /* At this point cinfo->unread_marker contains the marker code and the
-     * input point is just past the marker proper, but before any parameters.
-     * A suspension will cause us to return with this state still true.
-     */
-    switch (cinfo->unread_marker) {
-    case M_SOI:
-      if (! get_soi(cinfo))
-	return JPEG_SUSPENDED;
-      break;
-
-    case M_SOF0:		/* Baseline */
-    case M_SOF1:		/* Extended sequential, Huffman */
-      if (! get_sof(cinfo, FALSE, FALSE))
-	return JPEG_SUSPENDED;
-      break;
-
-    case M_SOF2:		/* Progressive, Huffman */
-      if (! get_sof(cinfo, TRUE, FALSE))
-	return JPEG_SUSPENDED;
-      break;
-
-    case M_SOF9:		/* Extended sequential, arithmetic */
-      if (! get_sof(cinfo, FALSE, TRUE))
-	return JPEG_SUSPENDED;
-      break;
-
-    case M_SOF10:		/* Progressive, arithmetic */
-      if (! get_sof(cinfo, TRUE, TRUE))
-	return JPEG_SUSPENDED;
-      break;
-
-    /* Currently unsupported SOFn types */
-    case M_SOF3:		/* Lossless, Huffman */
-    case M_SOF5:		/* Differential sequential, Huffman */
-    case M_SOF6:		/* Differential progressive, Huffman */
-    case M_SOF7:		/* Differential lossless, Huffman */
-    case M_JPG:			/* Reserved for JPEG extensions */
-    case M_SOF11:		/* Lossless, arithmetic */
-    case M_SOF13:		/* Differential sequential, arithmetic */
-    case M_SOF14:		/* Differential progressive, arithmetic */
-    case M_SOF15:		/* Differential lossless, arithmetic */
-      ERREXIT1(cinfo, JERR_SOF_UNSUPPORTED, cinfo->unread_marker);
-      break;
-
-    case M_SOS:
-      if (! get_sos(cinfo))
-	return JPEG_SUSPENDED;
-      cinfo->unread_marker = 0;	/* processed the marker */
-      return JPEG_REACHED_SOS;
-    
-    case M_EOI:
-      TRACEMS(cinfo, 1, JTRC_EOI);
-      cinfo->unread_marker = 0;	/* processed the marker */
-      return JPEG_REACHED_EOI;
-      
-    case M_DAC:
-      if (! get_dac(cinfo))
-	return JPEG_SUSPENDED;
-      break;
-      
-    case M_DHT:
-      if (! get_dht(cinfo))
-	return JPEG_SUSPENDED;
-      break;
-      
-    case M_DQT:
-      if (! get_dqt(cinfo))
-	return JPEG_SUSPENDED;
-      break;
-      
-    case M_DRI:
-      if (! get_dri(cinfo))
-	return JPEG_SUSPENDED;
-      break;
-      
-    case M_APP0:
-    case M_APP1:
-    case M_APP2:
-    case M_APP3:
-    case M_APP4:
-    case M_APP5:
-    case M_APP6:
-    case M_APP7:
-    case M_APP8:
-    case M_APP9:
-    case M_APP10:
-    case M_APP11:
-    case M_APP12:
-    case M_APP13:
-    case M_APP14:
-    case M_APP15:
-      if (! (*((my_marker_ptr) cinfo->marker)->process_APPn[
-		cinfo->unread_marker - (int) M_APP0]) (cinfo))
-	return JPEG_SUSPENDED;
-      break;
-      
-    case M_COM:
-      if (! (*((my_marker_ptr) cinfo->marker)->process_COM) (cinfo))
-	return JPEG_SUSPENDED;
-      break;
-
-    case M_RST0:		/* these are all parameterless */
-    case M_RST1:
-    case M_RST2:
-    case M_RST3:
-    case M_RST4:
-    case M_RST5:
-    case M_RST6:
-    case M_RST7:
-    case M_TEM:
-      TRACEMS1(cinfo, 1, JTRC_PARMLESS_MARKER, cinfo->unread_marker);
-      break;
-
-    case M_DNL:			/* Ignore DNL ... perhaps the wrong thing */
-      if (! skip_variable(cinfo))
-	return JPEG_SUSPENDED;
-      break;
-
-    default:			/* must be DHP, EXP, JPGn, or RESn */
-      /* For now, we treat the reserved markers as fatal errors since they are
-       * likely to be used to signal incompatible JPEG Part 3 extensions.
-       * Once the JPEG 3 version-number marker is well defined, this code
-       * ought to change!
-       */
-      ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker);
-      break;
-    }
-    /* Successfully processed marker, so reset state variable */
-    cinfo->unread_marker = 0;
-  } /* end loop */
-}
-
-
-/*
- * Read a restart marker, which is expected to appear next in the datastream;
- * if the marker is not there, take appropriate recovery action.
- * Returns FALSE if suspension is required.
- *
- * This is called by the entropy decoder after it has read an appropriate
- * number of MCUs.  cinfo->unread_marker may be nonzero if the entropy decoder
- * has already read a marker from the data source.  Under normal conditions
- * cinfo->unread_marker will be reset to 0 before returning; if not reset,
- * it holds a marker which the decoder will be unable to read past.
- */
-
-METHODDEF(boolean)
-read_restart_marker (j_decompress_ptr cinfo)
-{
-  /* Obtain a marker unless we already did. */
-  /* Note that next_marker will complain if it skips any data. */
-  if (cinfo->unread_marker == 0) {
-    if (! next_marker(cinfo))
-      return FALSE;
-  }
-
-  if (cinfo->unread_marker ==
-      ((int) M_RST0 + cinfo->marker->next_restart_num)) {
-    /* Normal case --- swallow the marker and let entropy decoder continue */
-    TRACEMS1(cinfo, 3, JTRC_RST, cinfo->marker->next_restart_num);
-    cinfo->unread_marker = 0;
-  } else {
-    /* Uh-oh, the restart markers have been messed up. */
-    /* Let the data source manager determine how to resync. */
-    if (! (*cinfo->src->resync_to_restart) (cinfo,
-					    cinfo->marker->next_restart_num))
-      return FALSE;
-  }
-
-  /* Update next-restart state */
-  cinfo->marker->next_restart_num = (cinfo->marker->next_restart_num + 1) & 7;
-
-  return TRUE;
-}
-
-
-/*
- * This is the default resync_to_restart method for data source managers
- * to use if they don't have any better approach.  Some data source managers
- * may be able to back up, or may have additional knowledge about the data
- * which permits a more intelligent recovery strategy; such managers would
- * presumably supply their own resync method.
- *
- * read_restart_marker calls resync_to_restart if it finds a marker other than
- * the restart marker it was expecting.  (This code is *not* used unless
- * a nonzero restart interval has been declared.)  cinfo->unread_marker is
- * the marker code actually found (might be anything, except 0 or FF).
- * The desired restart marker number (0..7) is passed as a parameter.
- * This routine is supposed to apply whatever error recovery strategy seems
- * appropriate in order to position the input stream to the next data segment.
- * Note that cinfo->unread_marker is treated as a marker appearing before
- * the current data-source input point; usually it should be reset to zero
- * before returning.
- * Returns FALSE if suspension is required.
- *
- * This implementation is substantially constrained by wanting to treat the
- * input as a data stream; this means we can't back up.  Therefore, we have
- * only the following actions to work with:
- *   1. Simply discard the marker and let the entropy decoder resume at next
- *      byte of file.
- *   2. Read forward until we find another marker, discarding intervening
- *      data.  (In theory we could look ahead within the current bufferload,
- *      without having to discard data if we don't find the desired marker.
- *      This idea is not implemented here, in part because it makes behavior
- *      dependent on buffer size and chance buffer-boundary positions.)
- *   3. Leave the marker unread (by failing to zero cinfo->unread_marker).
- *      This will cause the entropy decoder to process an empty data segment,
- *      inserting dummy zeroes, and then we will reprocess the marker.
- *
- * #2 is appropriate if we think the desired marker lies ahead, while #3 is
- * appropriate if the found marker is a future restart marker (indicating
- * that we have missed the desired restart marker, probably because it got
- * corrupted).
- * We apply #2 or #3 if the found marker is a restart marker no more than
- * two counts behind or ahead of the expected one.  We also apply #2 if the
- * found marker is not a legal JPEG marker code (it's certainly bogus data).
- * If the found marker is a restart marker more than 2 counts away, we do #1
- * (too much risk that the marker is erroneous; with luck we will be able to
- * resync at some future point).
- * For any valid non-restart JPEG marker, we apply #3.  This keeps us from
- * overrunning the end of a scan.  An implementation limited to single-scan
- * files might find it better to apply #2 for markers other than EOI, since
- * any other marker would have to be bogus data in that case.
- */
-
-GLOBAL(boolean)
-jpeg_resync_to_restart (j_decompress_ptr cinfo, int desired)
-{
-  int marker = cinfo->unread_marker;
-  int action = 1;
-  
-  /* Always put up a warning. */
-  WARNMS2(cinfo, JWRN_MUST_RESYNC, marker, desired);
-  
-  /* Outer loop handles repeated decision after scanning forward. */
-  for (;;) {
-    if (marker < (int) M_SOF0)
-      action = 2;		/* invalid marker */
-    else if (marker < (int) M_RST0 || marker > (int) M_RST7)
-      action = 3;		/* valid non-restart marker */
-    else {
-      if (marker == ((int) M_RST0 + ((desired+1) & 7)) ||
-	  marker == ((int) M_RST0 + ((desired+2) & 7)))
-	action = 3;		/* one of the next two expected restarts */
-      else if (marker == ((int) M_RST0 + ((desired-1) & 7)) ||
-	       marker == ((int) M_RST0 + ((desired-2) & 7)))
-	action = 2;		/* a prior restart, so advance */
-      else
-	action = 1;		/* desired restart or too far away */
-    }
-    TRACEMS2(cinfo, 4, JTRC_RECOVERY_ACTION, marker, action);
-    switch (action) {
-    case 1:
-      /* Discard marker and let entropy decoder resume processing. */
-      cinfo->unread_marker = 0;
-      return TRUE;
-    case 2:
-      /* Scan to the next marker, and repeat the decision loop. */
-      if (! next_marker(cinfo))
-	return FALSE;
-      marker = cinfo->unread_marker;
-      break;
-    case 3:
-      /* Return without advancing past this marker. */
-      /* Entropy decoder will be forced to process an empty segment. */
-      return TRUE;
-    }
-  } /* end loop */
-}
-
-
-/*
- * Reset marker processing state to begin a fresh datastream.
- */
-
-METHODDEF(void)
-reset_marker_reader (j_decompress_ptr cinfo)
-{
-  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
-
-  cinfo->comp_info = NULL;		/* until allocated by get_sof */
-  cinfo->input_scan_number = 0;		/* no SOS seen yet */
-  cinfo->unread_marker = 0;		/* no pending marker */
-  marker->pub.saw_SOI = FALSE;		/* set internal state too */
-  marker->pub.saw_SOF = FALSE;
-  marker->pub.discarded_bytes = 0;
-  marker->cur_marker = NULL;
-}
-
-
-/*
- * Initialize the marker reader module.
- * This is called only once, when the decompression object is created.
- */
-
-GLOBAL(void)
-jinit_marker_reader (j_decompress_ptr cinfo)
-{
-  my_marker_ptr marker;
-  int i;
-
-  /* Create subobject in permanent pool */
-  marker = (my_marker_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
-				SIZEOF(my_marker_reader));
-  cinfo->marker = (struct jpeg_marker_reader *) marker;
-  /* Initialize public method pointers */
-  marker->pub.reset_marker_reader = reset_marker_reader;
-  marker->pub.read_markers = read_markers;
-  marker->pub.read_restart_marker = read_restart_marker;
-  /* Initialize COM/APPn processing.
-   * By default, we examine and then discard APP0 and APP14,
-   * but simply discard COM and all other APPn.
-   */
-  marker->process_COM = skip_variable;
-  marker->length_limit_COM = 0;
-  for (i = 0; i < 16; i++) {
-    marker->process_APPn[i] = skip_variable;
-    marker->length_limit_APPn[i] = 0;
-  }
-  marker->process_APPn[0] = get_interesting_appn;
-  marker->process_APPn[14] = get_interesting_appn;
-  /* Reset marker processing state */
-  reset_marker_reader(cinfo);
-}
-
-
-/*
- * Control saving of COM and APPn markers into marker_list.
- */
-
-#ifdef SAVE_MARKERS_SUPPORTED
-
-GLOBAL(void)
-jpeg_save_markers (j_decompress_ptr cinfo, int marker_code,
-		   unsigned int length_limit)
-{
-  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
-  long maxlength;
-  jpeg_marker_parser_method processor;
-
-  /* Length limit mustn't be larger than what we can allocate
-   * (should only be a concern in a 16-bit environment).
-   */
-  maxlength = cinfo->mem->max_alloc_chunk - SIZEOF(struct jpeg_marker_struct);
-  if (((long) length_limit) > maxlength)
-    length_limit = (unsigned int) maxlength;
-
-  /* Choose processor routine to use.
-   * APP0/APP14 have special requirements.
-   */
-  if (length_limit) {
-    processor = save_marker;
-    /* If saving APP0/APP14, save at least enough for our internal use. */
-    if (marker_code == (int) M_APP0 && length_limit < APP0_DATA_LEN)
-      length_limit = APP0_DATA_LEN;
-    else if (marker_code == (int) M_APP14 && length_limit < APP14_DATA_LEN)
-      length_limit = APP14_DATA_LEN;
-  } else {
-    processor = skip_variable;
-    /* If discarding APP0/APP14, use our regular on-the-fly processor. */
-    if (marker_code == (int) M_APP0 || marker_code == (int) M_APP14)
-      processor = get_interesting_appn;
-  }
-
-  if (marker_code == (int) M_COM) {
-    marker->process_COM = processor;
-    marker->length_limit_COM = length_limit;
-  } else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) {
-    marker->process_APPn[marker_code - (int) M_APP0] = processor;
-    marker->length_limit_APPn[marker_code - (int) M_APP0] = length_limit;
-  } else
-    ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code);
-}
-
-#endif /* SAVE_MARKERS_SUPPORTED */
-
-
-/*
- * Install a special processing method for COM or APPn markers.
- */
-
-GLOBAL(void)
-jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code,
-			   jpeg_marker_parser_method routine)
-{
-  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
-
-  if (marker_code == (int) M_COM)
-    marker->process_COM = routine;
-  else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15)
-    marker->process_APPn[marker_code - (int) M_APP0] = routine;
-  else
-    ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code);
-}