isbn 2.0.4 → 2.0.5

data/src/jpeg-7/jdmaster.c

@@ -1,663 +0,0 @@
-/*
- * jdmaster.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 2002-2008 by Guido Vollbeding.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains master control logic for the JPEG decompressor.
- * These routines are concerned with selecting the modules to be executed
- * and with determining the number of passes and the work to be done in each
- * pass.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Private state */
-
-typedef struct {
-  struct jpeg_decomp_master pub; /* public fields */
-
-  int pass_number;		/* # of passes completed */
-
-  boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */
-
-  /* Saved references to initialized quantizer modules,
-   * in case we need to switch modes.
-   */
-  struct jpeg_color_quantizer * quantizer_1pass;
-  struct jpeg_color_quantizer * quantizer_2pass;
-} my_decomp_master;
-
-typedef my_decomp_master * my_master_ptr;
-
-
-/*
- * Determine whether merged upsample/color conversion should be used.
- * CRUCIAL: this must match the actual capabilities of jdmerge.c!
- */
-
-LOCAL(boolean)
-use_merged_upsample (j_decompress_ptr cinfo)
-{
-#ifdef UPSAMPLE_MERGING_SUPPORTED
-  /* Merging is the equivalent of plain box-filter upsampling */
-  if (cinfo->do_fancy_upsampling || cinfo->CCIR601_sampling)
-    return FALSE;
-  /* jdmerge.c only supports YCC=>RGB color conversion */
-  if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 ||
-      cinfo->out_color_space != JCS_RGB ||
-      cinfo->out_color_components != RGB_PIXELSIZE)
-    return FALSE;
-  /* and it only handles 2h1v or 2h2v sampling ratios */
-  if (cinfo->comp_info[0].h_samp_factor != 2 ||
-      cinfo->comp_info[1].h_samp_factor != 1 ||
-      cinfo->comp_info[2].h_samp_factor != 1 ||
-      cinfo->comp_info[0].v_samp_factor >  2 ||
-      cinfo->comp_info[1].v_samp_factor != 1 ||
-      cinfo->comp_info[2].v_samp_factor != 1)
-    return FALSE;
-  /* furthermore, it doesn't work if we've scaled the IDCTs differently */
-  if (cinfo->comp_info[0].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size ||
-      cinfo->comp_info[1].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size ||
-      cinfo->comp_info[2].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size ||
-      cinfo->comp_info[0].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size ||
-      cinfo->comp_info[1].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size ||
-      cinfo->comp_info[2].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size)
-    return FALSE;
-  /* ??? also need to test for upsample-time rescaling, when & if supported */
-  return TRUE;			/* by golly, it'll work... */
-#else
-  return FALSE;
-#endif
-}
-
-
-/*
- * Compute output image dimensions and related values.
- * NOTE: this is exported for possible use by application.
- * Hence it mustn't do anything that can't be done twice.
- * Also note that it may be called before the master module is initialized!
- */
-
-GLOBAL(void)
-jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
-/* Do computations that are needed before master selection phase */
-{
-#ifdef IDCT_SCALING_SUPPORTED
-  int ci;
-  jpeg_component_info *compptr;
-#endif
-
-  /* Prevent application from calling me at wrong times */
-  if (cinfo->global_state != DSTATE_READY)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
-#ifdef IDCT_SCALING_SUPPORTED
-
-  /* Compute actual output image dimensions and DCT scaling choices. */
-  if (cinfo->scale_num * 8 <= cinfo->scale_denom) {
-    /* Provide 1/8 scaling */
-    cinfo->output_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width, 8L);
-    cinfo->output_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height, 8L);
-    cinfo->min_DCT_h_scaled_size = 1;
-    cinfo->min_DCT_v_scaled_size = 1;
-  } else if (cinfo->scale_num * 4 <= cinfo->scale_denom) {
-    /* Provide 1/4 scaling */
-    cinfo->output_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width, 4L);
-    cinfo->output_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height, 4L);
-    cinfo->min_DCT_h_scaled_size = 2;
-    cinfo->min_DCT_v_scaled_size = 2;
-  } else if (cinfo->scale_num * 8 <= cinfo->scale_denom * 3) {
-    /* Provide 3/8 scaling */
-    cinfo->output_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * 3L, 8L);
-    cinfo->output_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * 3L, 8L);
-    cinfo->min_DCT_h_scaled_size = 3;
-    cinfo->min_DCT_v_scaled_size = 3;
-  } else if (cinfo->scale_num * 2 <= cinfo->scale_denom) {
-    /* Provide 1/2 scaling */
-    cinfo->output_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width, 2L);
-    cinfo->output_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height, 2L);
-    cinfo->min_DCT_h_scaled_size = 4;
-    cinfo->min_DCT_v_scaled_size = 4;
-  } else if (cinfo->scale_num * 8 <= cinfo->scale_denom * 5) {
-    /* Provide 5/8 scaling */
-    cinfo->output_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * 5L, 8L);
-    cinfo->output_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * 5L, 8L);
-    cinfo->min_DCT_h_scaled_size = 5;
-    cinfo->min_DCT_v_scaled_size = 5;
-  } else if (cinfo->scale_num * 4 <= cinfo->scale_denom * 3) {
-    /* Provide 3/4 scaling */
-    cinfo->output_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * 3L, 4L);
-    cinfo->output_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * 3L, 4L);
-    cinfo->min_DCT_h_scaled_size = 6;
-    cinfo->min_DCT_v_scaled_size = 6;
-  } else if (cinfo->scale_num * 8 <= cinfo->scale_denom * 7) {
-    /* Provide 7/8 scaling */
-    cinfo->output_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * 7L, 8L);
-    cinfo->output_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * 7L, 8L);
-    cinfo->min_DCT_h_scaled_size = 7;
-    cinfo->min_DCT_v_scaled_size = 7;
-  } else if (cinfo->scale_num <= cinfo->scale_denom) {
-    /* Provide 1/1 scaling */
-    cinfo->output_width = cinfo->image_width;
-    cinfo->output_height = cinfo->image_height;
-    cinfo->min_DCT_h_scaled_size = DCTSIZE;
-    cinfo->min_DCT_v_scaled_size = DCTSIZE;
-  } else if (cinfo->scale_num * 8 <= cinfo->scale_denom * 9) {
-    /* Provide 9/8 scaling */
-    cinfo->output_width = cinfo->image_width + (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width, 8L);
-    cinfo->output_height = cinfo->image_height + (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height, 8L);
-    cinfo->min_DCT_h_scaled_size = 9;
-    cinfo->min_DCT_v_scaled_size = 9;
-  } else if (cinfo->scale_num * 4 <= cinfo->scale_denom * 5) {
-    /* Provide 5/4 scaling */
-    cinfo->output_width = cinfo->image_width + (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width, 4L);
-    cinfo->output_height = cinfo->image_height + (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height, 4L);
-    cinfo->min_DCT_h_scaled_size = 10;
-    cinfo->min_DCT_v_scaled_size = 10;
-  } else if (cinfo->scale_num * 8 <= cinfo->scale_denom * 11) {
-    /* Provide 11/8 scaling */
-    cinfo->output_width = cinfo->image_width + (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * 3L, 8L);
-    cinfo->output_height = cinfo->image_height + (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * 3L, 8L);
-    cinfo->min_DCT_h_scaled_size = 11;
-    cinfo->min_DCT_v_scaled_size = 11;
-  } else if (cinfo->scale_num * 2 <= cinfo->scale_denom * 3) {
-    /* Provide 3/2 scaling */
-    cinfo->output_width = cinfo->image_width + (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width, 2L);
-    cinfo->output_height = cinfo->image_height + (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height, 2L);
-    cinfo->min_DCT_h_scaled_size = 12;
-    cinfo->min_DCT_v_scaled_size = 12;
-  } else if (cinfo->scale_num * 8 <= cinfo->scale_denom * 13) {
-    /* Provide 13/8 scaling */
-    cinfo->output_width = cinfo->image_width + (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * 5L, 8L);
-    cinfo->output_height = cinfo->image_height + (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * 5L, 8L);
-    cinfo->min_DCT_h_scaled_size = 13;
-    cinfo->min_DCT_v_scaled_size = 13;
-  } else if (cinfo->scale_num * 4 <= cinfo->scale_denom * 7) {
-    /* Provide 7/4 scaling */
-    cinfo->output_width = cinfo->image_width + (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * 3L, 4L);
-    cinfo->output_height = cinfo->image_height + (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * 3L, 4L);
-    cinfo->min_DCT_h_scaled_size = 14;
-    cinfo->min_DCT_v_scaled_size = 14;
-  } else if (cinfo->scale_num * 8 <= cinfo->scale_denom * 15) {
-    /* Provide 15/8 scaling */
-    cinfo->output_width = cinfo->image_width + (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * 7L, 8L);
-    cinfo->output_height = cinfo->image_height + (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * 7L, 8L);
-    cinfo->min_DCT_h_scaled_size = 15;
-    cinfo->min_DCT_v_scaled_size = 15;
-  } else {
-    /* Provide 2/1 scaling */
-    cinfo->output_width = cinfo->image_width << 1;
-    cinfo->output_height = cinfo->image_height << 1;
-    cinfo->min_DCT_h_scaled_size = 16;
-    cinfo->min_DCT_v_scaled_size = 16;
-  }
-  /* In selecting the actual DCT scaling for each component, we try to
-   * scale up the chroma components via IDCT scaling rather than upsampling.
-   * This saves time if the upsampler gets to use 1:1 scaling.
-   * Note this code adapts subsampling ratios which are powers of 2.
-   */
-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-       ci++, compptr++) {
-    int ssize = 1;
-    while (cinfo->min_DCT_h_scaled_size * ssize <=
-	   (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) &&
-	   (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == 0) {
-      ssize = ssize * 2;
-    }
-    compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize;
-    ssize = 1;
-    while (cinfo->min_DCT_v_scaled_size * ssize <=
-	   (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) &&
-	   (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == 0) {
-      ssize = ssize * 2;
-    }
-    compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize;
-
-    /* We don't support IDCT ratios larger than 2. */
-    if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2)
-	compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2;
-    else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2)
-	compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2;
-  }
-
-  /* Recompute downsampled dimensions of components;
-   * application needs to know these if using raw downsampled data.
-   */
-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-       ci++, compptr++) {
-    /* Size in samples, after IDCT scaling */
-    compptr->downsampled_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width *
-		    (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size),
-		    (long) (cinfo->max_h_samp_factor * DCTSIZE));
-    compptr->downsampled_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height *
-		    (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size),
-		    (long) (cinfo->max_v_samp_factor * DCTSIZE));
-  }
-
-#else /* !IDCT_SCALING_SUPPORTED */
-
-  /* Hardwire it to "no scaling" */
-  cinfo->output_width = cinfo->image_width;
-  cinfo->output_height = cinfo->image_height;
-  /* jdinput.c has already initialized DCT_scaled_size to DCTSIZE,
-   * and has computed unscaled downsampled_width and downsampled_height.
-   */
-
-#endif /* IDCT_SCALING_SUPPORTED */
-
-  /* Report number of components in selected colorspace. */
-  /* Probably this should be in the color conversion module... */
-  switch (cinfo->out_color_space) {
-  case JCS_GRAYSCALE:
-    cinfo->out_color_components = 1;
-    break;
-  case JCS_RGB:
-#if RGB_PIXELSIZE != 3
-    cinfo->out_color_components = RGB_PIXELSIZE;
-    break;
-#endif /* else share code with YCbCr */
-  case JCS_YCbCr:
-    cinfo->out_color_components = 3;
-    break;
-  case JCS_CMYK:
-  case JCS_YCCK:
-    cinfo->out_color_components = 4;
-    break;
-  default:			/* else must be same colorspace as in file */
-    cinfo->out_color_components = cinfo->num_components;
-    break;
-  }
-  cinfo->output_components = (cinfo->quantize_colors ? 1 :
-			      cinfo->out_color_components);
-
-  /* See if upsampler will want to emit more than one row at a time */
-  if (use_merged_upsample(cinfo))
-    cinfo->rec_outbuf_height = cinfo->max_v_samp_factor;
-  else
-    cinfo->rec_outbuf_height = 1;
-}
-
-
-/*
- * Several decompression processes need to range-limit values to the range
- * 0..MAXJSAMPLE; the input value may fall somewhat outside this range
- * due to noise introduced by quantization, roundoff error, etc.  These
- * processes are inner loops and need to be as fast as possible.  On most
- * machines, particularly CPUs with pipelines or instruction prefetch,
- * a (subscript-check-less) C table lookup
- *		x = sample_range_limit[x];
- * is faster than explicit tests
- *		if (x < 0)  x = 0;
- *		else if (x > MAXJSAMPLE)  x = MAXJSAMPLE;
- * These processes all use a common table prepared by the routine below.
- *
- * For most steps we can mathematically guarantee that the initial value
- * of x is within MAXJSAMPLE+1 of the legal range, so a table running from
- * -(MAXJSAMPLE+1) to 2*MAXJSAMPLE+1 is sufficient.  But for the initial
- * limiting step (just after the IDCT), a wildly out-of-range value is 
- * possible if the input data is corrupt.  To avoid any chance of indexing
- * off the end of memory and getting a bad-pointer trap, we perform the
- * post-IDCT limiting thus:
- *		x = range_limit[x & MASK];
- * where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit
- * samples.  Under normal circumstances this is more than enough range and
- * a correct output will be generated; with bogus input data the mask will
- * cause wraparound, and we will safely generate a bogus-but-in-range output.
- * For the post-IDCT step, we want to convert the data from signed to unsigned
- * representation by adding CENTERJSAMPLE at the same time that we limit it.
- * So the post-IDCT limiting table ends up looking like this:
- *   CENTERJSAMPLE,CENTERJSAMPLE+1,...,MAXJSAMPLE,
- *   MAXJSAMPLE (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times),
- *   0          (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times),
- *   0,1,...,CENTERJSAMPLE-1
- * Negative inputs select values from the upper half of the table after
- * masking.
- *
- * We can save some space by overlapping the start of the post-IDCT table
- * with the simpler range limiting table.  The post-IDCT table begins at
- * sample_range_limit + CENTERJSAMPLE.
- *
- * Note that the table is allocated in near data space on PCs; it's small
- * enough and used often enough to justify this.
- */
-
-LOCAL(void)
-prepare_range_limit_table (j_decompress_ptr cinfo)
-/* Allocate and fill in the sample_range_limit table */
-{
-  JSAMPLE * table;
-  int i;
-
-  table = (JSAMPLE *)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-		(5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE));
-  table += (MAXJSAMPLE+1);	/* allow negative subscripts of simple table */
-  cinfo->sample_range_limit = table;
-  /* First segment of "simple" table: limit[x] = 0 for x < 0 */
-  MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE));
-  /* Main part of "simple" table: limit[x] = x */
-  for (i = 0; i <= MAXJSAMPLE; i++)
-    table[i] = (JSAMPLE) i;
-  table += CENTERJSAMPLE;	/* Point to where post-IDCT table starts */
-  /* End of simple table, rest of first half of post-IDCT table */
-  for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++)
-    table[i] = MAXJSAMPLE;
-  /* Second half of post-IDCT table */
-  MEMZERO(table + (2 * (MAXJSAMPLE+1)),
-	  (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE));
-  MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE),
-	  cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE));
-}
-
-
-/*
- * Master selection of decompression modules.
- * This is done once at jpeg_start_decompress time.  We determine
- * which modules will be used and give them appropriate initialization calls.
- * We also initialize the decompressor input side to begin consuming data.
- *
- * Since jpeg_read_header has finished, we know what is in the SOF
- * and (first) SOS markers.  We also have all the application parameter
- * settings.
- */
-
-LOCAL(void)
-master_selection (j_decompress_ptr cinfo)
-{
-  my_master_ptr master = (my_master_ptr) cinfo->master;
-  boolean use_c_buffer;
-  long samplesperrow;
-  JDIMENSION jd_samplesperrow;
-
-  /* Initialize dimensions and other stuff */
-  jpeg_calc_output_dimensions(cinfo);
-  prepare_range_limit_table(cinfo);
-
-  /* Width of an output scanline must be representable as JDIMENSION. */
-  samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components;
-  jd_samplesperrow = (JDIMENSION) samplesperrow;
-  if ((long) jd_samplesperrow != samplesperrow)
-    ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
-
-  /* Initialize my private state */
-  master->pass_number = 0;
-  master->using_merged_upsample = use_merged_upsample(cinfo);
-
-  /* Color quantizer selection */
-  master->quantizer_1pass = NULL;
-  master->quantizer_2pass = NULL;
-  /* No mode changes if not using buffered-image mode. */
-  if (! cinfo->quantize_colors || ! cinfo->buffered_image) {
-    cinfo->enable_1pass_quant = FALSE;
-    cinfo->enable_external_quant = FALSE;
-    cinfo->enable_2pass_quant = FALSE;
-  }
-  if (cinfo->quantize_colors) {
-    if (cinfo->raw_data_out)
-      ERREXIT(cinfo, JERR_NOTIMPL);
-    /* 2-pass quantizer only works in 3-component color space. */
-    if (cinfo->out_color_components != 3) {
-      cinfo->enable_1pass_quant = TRUE;
-      cinfo->enable_external_quant = FALSE;
-      cinfo->enable_2pass_quant = FALSE;
-      cinfo->colormap = NULL;
-    } else if (cinfo->colormap != NULL) {
-      cinfo->enable_external_quant = TRUE;
-    } else if (cinfo->two_pass_quantize) {
-      cinfo->enable_2pass_quant = TRUE;
-    } else {
-      cinfo->enable_1pass_quant = TRUE;
-    }
-
-    if (cinfo->enable_1pass_quant) {
-#ifdef QUANT_1PASS_SUPPORTED
-      jinit_1pass_quantizer(cinfo);
-      master->quantizer_1pass = cinfo->cquantize;
-#else
-      ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
-    }
-
-    /* We use the 2-pass code to map to external colormaps. */
-    if (cinfo->enable_2pass_quant || cinfo->enable_external_quant) {
-#ifdef QUANT_2PASS_SUPPORTED
-      jinit_2pass_quantizer(cinfo);
-      master->quantizer_2pass = cinfo->cquantize;
-#else
-      ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
-    }
-    /* If both quantizers are initialized, the 2-pass one is left active;
-     * this is necessary for starting with quantization to an external map.
-     */
-  }
-
-  /* Post-processing: in particular, color conversion first */
-  if (! cinfo->raw_data_out) {
-    if (master->using_merged_upsample) {
-#ifdef UPSAMPLE_MERGING_SUPPORTED
-      jinit_merged_upsampler(cinfo); /* does color conversion too */
-#else
-      ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
-    } else {
-      jinit_color_deconverter(cinfo);
-      jinit_upsampler(cinfo);
-    }
-    jinit_d_post_controller(cinfo, cinfo->enable_2pass_quant);
-  }
-  /* Inverse DCT */
-  jinit_inverse_dct(cinfo);
-  /* Entropy decoding: either Huffman or arithmetic coding. */
-  if (cinfo->arith_code) {
-    jinit_arith_decoder(cinfo);
-  } else {
-    jinit_huff_decoder(cinfo);
-  }
-
-  /* Initialize principal buffer controllers. */
-  use_c_buffer = cinfo->inputctl->has_multiple_scans || cinfo->buffered_image;
-  jinit_d_coef_controller(cinfo, use_c_buffer);
-
-  if (! cinfo->raw_data_out)
-    jinit_d_main_controller(cinfo, FALSE /* never need full buffer here */);
-
-  /* We can now tell the memory manager to allocate virtual arrays. */
-  (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
-
-  /* Initialize input side of decompressor to consume first scan. */
-  (*cinfo->inputctl->start_input_pass) (cinfo);
-
-#ifdef D_MULTISCAN_FILES_SUPPORTED
-  /* If jpeg_start_decompress will read the whole file, initialize
-   * progress monitoring appropriately.  The input step is counted
-   * as one pass.
-   */
-  if (cinfo->progress != NULL && ! cinfo->buffered_image &&
-      cinfo->inputctl->has_multiple_scans) {
-    int nscans;
-    /* Estimate number of scans to set pass_limit. */
-    if (cinfo->progressive_mode) {
-      /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */
-      nscans = 2 + 3 * cinfo->num_components;
-    } else {
-      /* For a nonprogressive multiscan file, estimate 1 scan per component. */
-      nscans = cinfo->num_components;
-    }
-    cinfo->progress->pass_counter = 0L;
-    cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans;
-    cinfo->progress->completed_passes = 0;
-    cinfo->progress->total_passes = (cinfo->enable_2pass_quant ? 3 : 2);
-    /* Count the input pass as done */
-    master->pass_number++;
-  }
-#endif /* D_MULTISCAN_FILES_SUPPORTED */
-}
-
-
-/*
- * Per-pass setup.
- * This is called at the beginning of each output pass.  We determine which
- * modules will be active during this pass and give them appropriate
- * start_pass calls.  We also set is_dummy_pass to indicate whether this
- * is a "real" output pass or a dummy pass for color quantization.
- * (In the latter case, jdapistd.c will crank the pass to completion.)
- */
-
-METHODDEF(void)
-prepare_for_output_pass (j_decompress_ptr cinfo)
-{
-  my_master_ptr master = (my_master_ptr) cinfo->master;
-
-  if (master->pub.is_dummy_pass) {
-#ifdef QUANT_2PASS_SUPPORTED
-    /* Final pass of 2-pass quantization */
-    master->pub.is_dummy_pass = FALSE;
-    (*cinfo->cquantize->start_pass) (cinfo, FALSE);
-    (*cinfo->post->start_pass) (cinfo, JBUF_CRANK_DEST);
-    (*cinfo->main->start_pass) (cinfo, JBUF_CRANK_DEST);
-#else
-    ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif /* QUANT_2PASS_SUPPORTED */
-  } else {
-    if (cinfo->quantize_colors && cinfo->colormap == NULL) {
-      /* Select new quantization method */
-      if (cinfo->two_pass_quantize && cinfo->enable_2pass_quant) {
-	cinfo->cquantize = master->quantizer_2pass;
-	master->pub.is_dummy_pass = TRUE;
-      } else if (cinfo->enable_1pass_quant) {
-	cinfo->cquantize = master->quantizer_1pass;
-      } else {
-	ERREXIT(cinfo, JERR_MODE_CHANGE);
-      }
-    }
-    (*cinfo->idct->start_pass) (cinfo);
-    (*cinfo->coef->start_output_pass) (cinfo);
-    if (! cinfo->raw_data_out) {
-      if (! master->using_merged_upsample)
-	(*cinfo->cconvert->start_pass) (cinfo);
-      (*cinfo->upsample->start_pass) (cinfo);
-      if (cinfo->quantize_colors)
-	(*cinfo->cquantize->start_pass) (cinfo, master->pub.is_dummy_pass);
-      (*cinfo->post->start_pass) (cinfo,
-	    (master->pub.is_dummy_pass ? JBUF_SAVE_AND_PASS : JBUF_PASS_THRU));
-      (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU);
-    }
-  }
-
-  /* Set up progress monitor's pass info if present */
-  if (cinfo->progress != NULL) {
-    cinfo->progress->completed_passes = master->pass_number;
-    cinfo->progress->total_passes = master->pass_number +
-				    (master->pub.is_dummy_pass ? 2 : 1);
-    /* In buffered-image mode, we assume one more output pass if EOI not
-     * yet reached, but no more passes if EOI has been reached.
-     */
-    if (cinfo->buffered_image && ! cinfo->inputctl->eoi_reached) {
-      cinfo->progress->total_passes += (cinfo->enable_2pass_quant ? 2 : 1);
-    }
-  }
-}
-
-
-/*
- * Finish up at end of an output pass.
- */
-
-METHODDEF(void)
-finish_output_pass (j_decompress_ptr cinfo)
-{
-  my_master_ptr master = (my_master_ptr) cinfo->master;
-
-  if (cinfo->quantize_colors)
-    (*cinfo->cquantize->finish_pass) (cinfo);
-  master->pass_number++;
-}
-
-
-#ifdef D_MULTISCAN_FILES_SUPPORTED
-
-/*
- * Switch to a new external colormap between output passes.
- */
-
-GLOBAL(void)
-jpeg_new_colormap (j_decompress_ptr cinfo)
-{
-  my_master_ptr master = (my_master_ptr) cinfo->master;
-
-  /* Prevent application from calling me at wrong times */
-  if (cinfo->global_state != DSTATE_BUFIMAGE)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
-  if (cinfo->quantize_colors && cinfo->enable_external_quant &&
-      cinfo->colormap != NULL) {
-    /* Select 2-pass quantizer for external colormap use */
-    cinfo->cquantize = master->quantizer_2pass;
-    /* Notify quantizer of colormap change */
-    (*cinfo->cquantize->new_color_map) (cinfo);
-    master->pub.is_dummy_pass = FALSE; /* just in case */
-  } else
-    ERREXIT(cinfo, JERR_MODE_CHANGE);
-}
-
-#endif /* D_MULTISCAN_FILES_SUPPORTED */
-
-
-/*
- * Initialize master decompression control and select active modules.
- * This is performed at the start of jpeg_start_decompress.
- */
-
-GLOBAL(void)
-jinit_master_decompress (j_decompress_ptr cinfo)
-{
-  my_master_ptr master;
-
-  master = (my_master_ptr)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  SIZEOF(my_decomp_master));
-  cinfo->master = (struct jpeg_decomp_master *) master;
-  master->pub.prepare_for_output_pass = prepare_for_output_pass;
-  master->pub.finish_output_pass = finish_output_pass;
-
-  master->pub.is_dummy_pass = FALSE;
-
-  master_selection(cinfo);
-}