isbn 2.0.4 → 2.0.5

data/src/jpeg-7/jdmerge.c

@@ -1,400 +0,0 @@
-/*
- * jdmerge.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains code for merged upsampling/color conversion.
- *
- * This file combines functions from jdsample.c and jdcolor.c;
- * read those files first to understand what's going on.
- *
- * When the chroma components are to be upsampled by simple replication
- * (ie, box filtering), we can save some work in color conversion by
- * calculating all the output pixels corresponding to a pair of chroma
- * samples at one time.  In the conversion equations
- *	R = Y           + K1 * Cr
- *	G = Y + K2 * Cb + K3 * Cr
- *	B = Y + K4 * Cb
- * only the Y term varies among the group of pixels corresponding to a pair
- * of chroma samples, so the rest of the terms can be calculated just once.
- * At typical sampling ratios, this eliminates half or three-quarters of the
- * multiplications needed for color conversion.
- *
- * This file currently provides implementations for the following cases:
- *	YCbCr => RGB color conversion only.
- *	Sampling ratios of 2h1v or 2h2v.
- *	No scaling needed at upsample time.
- *	Corner-aligned (non-CCIR601) sampling alignment.
- * Other special cases could be added, but in most applications these are
- * the only common cases.  (For uncommon cases we fall back on the more
- * general code in jdsample.c and jdcolor.c.)
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-#ifdef UPSAMPLE_MERGING_SUPPORTED
-
-
-/* Private subobject */
-
-typedef struct {
-  struct jpeg_upsampler pub;	/* public fields */
-
-  /* Pointer to routine to do actual upsampling/conversion of one row group */
-  JMETHOD(void, upmethod, (j_decompress_ptr cinfo,
-			   JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
-			   JSAMPARRAY output_buf));
-
-  /* Private state for YCC->RGB conversion */
-  int * Cr_r_tab;		/* => table for Cr to R conversion */
-  int * Cb_b_tab;		/* => table for Cb to B conversion */
-  INT32 * Cr_g_tab;		/* => table for Cr to G conversion */
-  INT32 * Cb_g_tab;		/* => table for Cb to G conversion */
-
-  /* For 2:1 vertical sampling, we produce two output rows at a time.
-   * We need a "spare" row buffer to hold the second output row if the
-   * application provides just a one-row buffer; we also use the spare
-   * to discard the dummy last row if the image height is odd.
-   */
-  JSAMPROW spare_row;
-  boolean spare_full;		/* T if spare buffer is occupied */
-
-  JDIMENSION out_row_width;	/* samples per output row */
-  JDIMENSION rows_to_go;	/* counts rows remaining in image */
-} my_upsampler;
-
-typedef my_upsampler * my_upsample_ptr;
-
-#define SCALEBITS	16	/* speediest right-shift on some machines */
-#define ONE_HALF	((INT32) 1 << (SCALEBITS-1))
-#define FIX(x)		((INT32) ((x) * (1L<<SCALEBITS) + 0.5))
-
-
-/*
- * Initialize tables for YCC->RGB colorspace conversion.
- * This is taken directly from jdcolor.c; see that file for more info.
- */
-
-LOCAL(void)
-build_ycc_rgb_table (j_decompress_ptr cinfo)
-{
-  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
-  int i;
-  INT32 x;
-  SHIFT_TEMPS
-
-  upsample->Cr_r_tab = (int *)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				(MAXJSAMPLE+1) * SIZEOF(int));
-  upsample->Cb_b_tab = (int *)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				(MAXJSAMPLE+1) * SIZEOF(int));
-  upsample->Cr_g_tab = (INT32 *)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				(MAXJSAMPLE+1) * SIZEOF(INT32));
-  upsample->Cb_g_tab = (INT32 *)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				(MAXJSAMPLE+1) * SIZEOF(INT32));
-
-  for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
-    /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
-    /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
-    /* Cr=>R value is nearest int to 1.40200 * x */
-    upsample->Cr_r_tab[i] = (int)
-		    RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
-    /* Cb=>B value is nearest int to 1.77200 * x */
-    upsample->Cb_b_tab[i] = (int)
-		    RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
-    /* Cr=>G value is scaled-up -0.71414 * x */
-    upsample->Cr_g_tab[i] = (- FIX(0.71414)) * x;
-    /* Cb=>G value is scaled-up -0.34414 * x */
-    /* We also add in ONE_HALF so that need not do it in inner loop */
-    upsample->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF;
-  }
-}
-
-
-/*
- * Initialize for an upsampling pass.
- */
-
-METHODDEF(void)
-start_pass_merged_upsample (j_decompress_ptr cinfo)
-{
-  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
-
-  /* Mark the spare buffer empty */
-  upsample->spare_full = FALSE;
-  /* Initialize total-height counter for detecting bottom of image */
-  upsample->rows_to_go = cinfo->output_height;
-}
-
-
-/*
- * Control routine to do upsampling (and color conversion).
- *
- * The control routine just handles the row buffering considerations.
- */
-
-METHODDEF(void)
-merged_2v_upsample (j_decompress_ptr cinfo,
-		    JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
-		    JDIMENSION in_row_groups_avail,
-		    JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
-		    JDIMENSION out_rows_avail)
-/* 2:1 vertical sampling case: may need a spare row. */
-{
-  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
-  JSAMPROW work_ptrs[2];
-  JDIMENSION num_rows;		/* number of rows returned to caller */
-
-  if (upsample->spare_full) {
-    /* If we have a spare row saved from a previous cycle, just return it. */
-    jcopy_sample_rows(& upsample->spare_row, 0, output_buf + *out_row_ctr, 0,
-		      1, upsample->out_row_width);
-    num_rows = 1;
-    upsample->spare_full = FALSE;
-  } else {
-    /* Figure number of rows to return to caller. */
-    num_rows = 2;
-    /* Not more than the distance to the end of the image. */
-    if (num_rows > upsample->rows_to_go)
-      num_rows = upsample->rows_to_go;
-    /* And not more than what the client can accept: */
-    out_rows_avail -= *out_row_ctr;
-    if (num_rows > out_rows_avail)
-      num_rows = out_rows_avail;
-    /* Create output pointer array for upsampler. */
-    work_ptrs[0] = output_buf[*out_row_ctr];
-    if (num_rows > 1) {
-      work_ptrs[1] = output_buf[*out_row_ctr + 1];
-    } else {
-      work_ptrs[1] = upsample->spare_row;
-      upsample->spare_full = TRUE;
-    }
-    /* Now do the upsampling. */
-    (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, work_ptrs);
-  }
-
-  /* Adjust counts */
-  *out_row_ctr += num_rows;
-  upsample->rows_to_go -= num_rows;
-  /* When the buffer is emptied, declare this input row group consumed */
-  if (! upsample->spare_full)
-    (*in_row_group_ctr)++;
-}
-
-
-METHODDEF(void)
-merged_1v_upsample (j_decompress_ptr cinfo,
-		    JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
-		    JDIMENSION in_row_groups_avail,
-		    JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
-		    JDIMENSION out_rows_avail)
-/* 1:1 vertical sampling case: much easier, never need a spare row. */
-{
-  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
-
-  /* Just do the upsampling. */
-  (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr,
-			 output_buf + *out_row_ctr);
-  /* Adjust counts */
-  (*out_row_ctr)++;
-  (*in_row_group_ctr)++;
-}
-
-
-/*
- * These are the routines invoked by the control routines to do
- * the actual upsampling/conversion.  One row group is processed per call.
- *
- * Note: since we may be writing directly into application-supplied buffers,
- * we have to be honest about the output width; we can't assume the buffer
- * has been rounded up to an even width.
- */
-
-
-/*
- * Upsample and color convert for the case of 2:1 horizontal and 1:1 vertical.
- */
-
-METHODDEF(void)
-h2v1_merged_upsample (j_decompress_ptr cinfo,
-		      JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
-		      JSAMPARRAY output_buf)
-{
-  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
-  register int y, cred, cgreen, cblue;
-  int cb, cr;
-  register JSAMPROW outptr;
-  JSAMPROW inptr0, inptr1, inptr2;
-  JDIMENSION col;
-  /* copy these pointers into registers if possible */
-  register JSAMPLE * range_limit = cinfo->sample_range_limit;
-  int * Crrtab = upsample->Cr_r_tab;
-  int * Cbbtab = upsample->Cb_b_tab;
-  INT32 * Crgtab = upsample->Cr_g_tab;
-  INT32 * Cbgtab = upsample->Cb_g_tab;
-  SHIFT_TEMPS
-
-  inptr0 = input_buf[0][in_row_group_ctr];
-  inptr1 = input_buf[1][in_row_group_ctr];
-  inptr2 = input_buf[2][in_row_group_ctr];
-  outptr = output_buf[0];
-  /* Loop for each pair of output pixels */
-  for (col = cinfo->output_width >> 1; col > 0; col--) {
-    /* Do the chroma part of the calculation */
-    cb = GETJSAMPLE(*inptr1++);
-    cr = GETJSAMPLE(*inptr2++);
-    cred = Crrtab[cr];
-    cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
-    cblue = Cbbtab[cb];
-    /* Fetch 2 Y values and emit 2 pixels */
-    y  = GETJSAMPLE(*inptr0++);
-    outptr[RGB_RED] =   range_limit[y + cred];
-    outptr[RGB_GREEN] = range_limit[y + cgreen];
-    outptr[RGB_BLUE] =  range_limit[y + cblue];
-    outptr += RGB_PIXELSIZE;
-    y  = GETJSAMPLE(*inptr0++);
-    outptr[RGB_RED] =   range_limit[y + cred];
-    outptr[RGB_GREEN] = range_limit[y + cgreen];
-    outptr[RGB_BLUE] =  range_limit[y + cblue];
-    outptr += RGB_PIXELSIZE;
-  }
-  /* If image width is odd, do the last output column separately */
-  if (cinfo->output_width & 1) {
-    cb = GETJSAMPLE(*inptr1);
-    cr = GETJSAMPLE(*inptr2);
-    cred = Crrtab[cr];
-    cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
-    cblue = Cbbtab[cb];
-    y  = GETJSAMPLE(*inptr0);
-    outptr[RGB_RED] =   range_limit[y + cred];
-    outptr[RGB_GREEN] = range_limit[y + cgreen];
-    outptr[RGB_BLUE] =  range_limit[y + cblue];
-  }
-}
-
-
-/*
- * Upsample and color convert for the case of 2:1 horizontal and 2:1 vertical.
- */
-
-METHODDEF(void)
-h2v2_merged_upsample (j_decompress_ptr cinfo,
-		      JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
-		      JSAMPARRAY output_buf)
-{
-  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
-  register int y, cred, cgreen, cblue;
-  int cb, cr;
-  register JSAMPROW outptr0, outptr1;
-  JSAMPROW inptr00, inptr01, inptr1, inptr2;
-  JDIMENSION col;
-  /* copy these pointers into registers if possible */
-  register JSAMPLE * range_limit = cinfo->sample_range_limit;
-  int * Crrtab = upsample->Cr_r_tab;
-  int * Cbbtab = upsample->Cb_b_tab;
-  INT32 * Crgtab = upsample->Cr_g_tab;
-  INT32 * Cbgtab = upsample->Cb_g_tab;
-  SHIFT_TEMPS
-
-  inptr00 = input_buf[0][in_row_group_ctr*2];
-  inptr01 = input_buf[0][in_row_group_ctr*2 + 1];
-  inptr1 = input_buf[1][in_row_group_ctr];
-  inptr2 = input_buf[2][in_row_group_ctr];
-  outptr0 = output_buf[0];
-  outptr1 = output_buf[1];
-  /* Loop for each group of output pixels */
-  for (col = cinfo->output_width >> 1; col > 0; col--) {
-    /* Do the chroma part of the calculation */
-    cb = GETJSAMPLE(*inptr1++);
-    cr = GETJSAMPLE(*inptr2++);
-    cred = Crrtab[cr];
-    cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
-    cblue = Cbbtab[cb];
-    /* Fetch 4 Y values and emit 4 pixels */
-    y  = GETJSAMPLE(*inptr00++);
-    outptr0[RGB_RED] =   range_limit[y + cred];
-    outptr0[RGB_GREEN] = range_limit[y + cgreen];
-    outptr0[RGB_BLUE] =  range_limit[y + cblue];
-    outptr0 += RGB_PIXELSIZE;
-    y  = GETJSAMPLE(*inptr00++);
-    outptr0[RGB_RED] =   range_limit[y + cred];
-    outptr0[RGB_GREEN] = range_limit[y + cgreen];
-    outptr0[RGB_BLUE] =  range_limit[y + cblue];
-    outptr0 += RGB_PIXELSIZE;
-    y  = GETJSAMPLE(*inptr01++);
-    outptr1[RGB_RED] =   range_limit[y + cred];
-    outptr1[RGB_GREEN] = range_limit[y + cgreen];
-    outptr1[RGB_BLUE] =  range_limit[y + cblue];
-    outptr1 += RGB_PIXELSIZE;
-    y  = GETJSAMPLE(*inptr01++);
-    outptr1[RGB_RED] =   range_limit[y + cred];
-    outptr1[RGB_GREEN] = range_limit[y + cgreen];
-    outptr1[RGB_BLUE] =  range_limit[y + cblue];
-    outptr1 += RGB_PIXELSIZE;
-  }
-  /* If image width is odd, do the last output column separately */
-  if (cinfo->output_width & 1) {
-    cb = GETJSAMPLE(*inptr1);
-    cr = GETJSAMPLE(*inptr2);
-    cred = Crrtab[cr];
-    cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
-    cblue = Cbbtab[cb];
-    y  = GETJSAMPLE(*inptr00);
-    outptr0[RGB_RED] =   range_limit[y + cred];
-    outptr0[RGB_GREEN] = range_limit[y + cgreen];
-    outptr0[RGB_BLUE] =  range_limit[y + cblue];
-    y  = GETJSAMPLE(*inptr01);
-    outptr1[RGB_RED] =   range_limit[y + cred];
-    outptr1[RGB_GREEN] = range_limit[y + cgreen];
-    outptr1[RGB_BLUE] =  range_limit[y + cblue];
-  }
-}
-
-
-/*
- * Module initialization routine for merged upsampling/color conversion.
- *
- * NB: this is called under the conditions determined by use_merged_upsample()
- * in jdmaster.c.  That routine MUST correspond to the actual capabilities
- * of this module; no safety checks are made here.
- */
-
-GLOBAL(void)
-jinit_merged_upsampler (j_decompress_ptr cinfo)
-{
-  my_upsample_ptr upsample;
-
-  upsample = (my_upsample_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(my_upsampler));
-  cinfo->upsample = (struct jpeg_upsampler *) upsample;
-  upsample->pub.start_pass = start_pass_merged_upsample;
-  upsample->pub.need_context_rows = FALSE;
-
-  upsample->out_row_width = cinfo->output_width * cinfo->out_color_components;
-
-  if (cinfo->max_v_samp_factor == 2) {
-    upsample->pub.upsample = merged_2v_upsample;
-    upsample->upmethod = h2v2_merged_upsample;
-    /* Allocate a spare row buffer */
-    upsample->spare_row = (JSAMPROW)
-      (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-		(size_t) (upsample->out_row_width * SIZEOF(JSAMPLE)));
-  } else {
-    upsample->pub.upsample = merged_1v_upsample;
-    upsample->upmethod = h2v1_merged_upsample;
-    /* No spare row needed */
-    upsample->spare_row = NULL;
-  }
-
-  build_ycc_rgb_table(cinfo);
-}
-
-#endif /* UPSAMPLE_MERGING_SUPPORTED */

data/src/jpeg-7/jdpostct.c

@@ -1,290 +0,0 @@
-/*
- * jdpostct.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains the decompression postprocessing controller.
- * This controller manages the upsampling, color conversion, and color
- * quantization/reduction steps; specifically, it controls the buffering
- * between upsample/color conversion and color quantization/reduction.
- *
- * If no color quantization/reduction is required, then this module has no
- * work to do, and it just hands off to the upsample/color conversion code.
- * An integrated upsample/convert/quantize process would replace this module
- * entirely.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Private buffer controller object */
-
-typedef struct {
-  struct jpeg_d_post_controller pub; /* public fields */
-
-  /* Color quantization source buffer: this holds output data from
-   * the upsample/color conversion step to be passed to the quantizer.
-   * For two-pass color quantization, we need a full-image buffer;
-   * for one-pass operation, a strip buffer is sufficient.
-   */
-  jvirt_sarray_ptr whole_image;	/* virtual array, or NULL if one-pass */
-  JSAMPARRAY buffer;		/* strip buffer, or current strip of virtual */
-  JDIMENSION strip_height;	/* buffer size in rows */
-  /* for two-pass mode only: */
-  JDIMENSION starting_row;	/* row # of first row in current strip */
-  JDIMENSION next_row;		/* index of next row to fill/empty in strip */
-} my_post_controller;
-
-typedef my_post_controller * my_post_ptr;
-
-
-/* Forward declarations */
-METHODDEF(void) post_process_1pass
-	JPP((j_decompress_ptr cinfo,
-	     JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
-	     JDIMENSION in_row_groups_avail,
-	     JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
-	     JDIMENSION out_rows_avail));
-#ifdef QUANT_2PASS_SUPPORTED
-METHODDEF(void) post_process_prepass
-	JPP((j_decompress_ptr cinfo,
-	     JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
-	     JDIMENSION in_row_groups_avail,
-	     JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
-	     JDIMENSION out_rows_avail));
-METHODDEF(void) post_process_2pass
-	JPP((j_decompress_ptr cinfo,
-	     JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
-	     JDIMENSION in_row_groups_avail,
-	     JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
-	     JDIMENSION out_rows_avail));
-#endif
-
-
-/*
- * Initialize for a processing pass.
- */
-
-METHODDEF(void)
-start_pass_dpost (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)
-{
-  my_post_ptr post = (my_post_ptr) cinfo->post;
-
-  switch (pass_mode) {
-  case JBUF_PASS_THRU:
-    if (cinfo->quantize_colors) {
-      /* Single-pass processing with color quantization. */
-      post->pub.post_process_data = post_process_1pass;
-      /* We could be doing buffered-image output before starting a 2-pass
-       * color quantization; in that case, jinit_d_post_controller did not
-       * allocate a strip buffer.  Use the virtual-array buffer as workspace.
-       */
-      if (post->buffer == NULL) {
-	post->buffer = (*cinfo->mem->access_virt_sarray)
-	  ((j_common_ptr) cinfo, post->whole_image,
-	   (JDIMENSION) 0, post->strip_height, TRUE);
-      }
-    } else {
-      /* For single-pass processing without color quantization,
-       * I have no work to do; just call the upsampler directly.
-       */
-      post->pub.post_process_data = cinfo->upsample->upsample;
-    }
-    break;
-#ifdef QUANT_2PASS_SUPPORTED
-  case JBUF_SAVE_AND_PASS:
-    /* First pass of 2-pass quantization */
-    if (post->whole_image == NULL)
-      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-    post->pub.post_process_data = post_process_prepass;
-    break;
-  case JBUF_CRANK_DEST:
-    /* Second pass of 2-pass quantization */
-    if (post->whole_image == NULL)
-      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-    post->pub.post_process_data = post_process_2pass;
-    break;
-#endif /* QUANT_2PASS_SUPPORTED */
-  default:
-    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-    break;
-  }
-  post->starting_row = post->next_row = 0;
-}
-
-
-/*
- * Process some data in the one-pass (strip buffer) case.
- * This is used for color precision reduction as well as one-pass quantization.
- */
-
-METHODDEF(void)
-post_process_1pass (j_decompress_ptr cinfo,
-		    JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
-		    JDIMENSION in_row_groups_avail,
-		    JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
-		    JDIMENSION out_rows_avail)
-{
-  my_post_ptr post = (my_post_ptr) cinfo->post;
-  JDIMENSION num_rows, max_rows;
-
-  /* Fill the buffer, but not more than what we can dump out in one go. */
-  /* Note we rely on the upsampler to detect bottom of image. */
-  max_rows = out_rows_avail - *out_row_ctr;
-  if (max_rows > post->strip_height)
-    max_rows = post->strip_height;
-  num_rows = 0;
-  (*cinfo->upsample->upsample) (cinfo,
-		input_buf, in_row_group_ctr, in_row_groups_avail,
-		post->buffer, &num_rows, max_rows);
-  /* Quantize and emit data. */
-  (*cinfo->cquantize->color_quantize) (cinfo,
-		post->buffer, output_buf + *out_row_ctr, (int) num_rows);
-  *out_row_ctr += num_rows;
-}
-
-
-#ifdef QUANT_2PASS_SUPPORTED
-
-/*
- * Process some data in the first pass of 2-pass quantization.
- */
-
-METHODDEF(void)
-post_process_prepass (j_decompress_ptr cinfo,
-		      JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
-		      JDIMENSION in_row_groups_avail,
-		      JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
-		      JDIMENSION out_rows_avail)
-{
-  my_post_ptr post = (my_post_ptr) cinfo->post;
-  JDIMENSION old_next_row, num_rows;
-
-  /* Reposition virtual buffer if at start of strip. */
-  if (post->next_row == 0) {
-    post->buffer = (*cinfo->mem->access_virt_sarray)
-	((j_common_ptr) cinfo, post->whole_image,
-	 post->starting_row, post->strip_height, TRUE);
-  }
-
-  /* Upsample some data (up to a strip height's worth). */
-  old_next_row = post->next_row;
-  (*cinfo->upsample->upsample) (cinfo,
-		input_buf, in_row_group_ctr, in_row_groups_avail,
-		post->buffer, &post->next_row, post->strip_height);
-
-  /* Allow quantizer to scan new data.  No data is emitted, */
-  /* but we advance out_row_ctr so outer loop can tell when we're done. */
-  if (post->next_row > old_next_row) {
-    num_rows = post->next_row - old_next_row;
-    (*cinfo->cquantize->color_quantize) (cinfo, post->buffer + old_next_row,
-					 (JSAMPARRAY) NULL, (int) num_rows);
-    *out_row_ctr += num_rows;
-  }
-
-  /* Advance if we filled the strip. */
-  if (post->next_row >= post->strip_height) {
-    post->starting_row += post->strip_height;
-    post->next_row = 0;
-  }
-}
-
-
-/*
- * Process some data in the second pass of 2-pass quantization.
- */
-
-METHODDEF(void)
-post_process_2pass (j_decompress_ptr cinfo,
-		    JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
-		    JDIMENSION in_row_groups_avail,
-		    JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
-		    JDIMENSION out_rows_avail)
-{
-  my_post_ptr post = (my_post_ptr) cinfo->post;
-  JDIMENSION num_rows, max_rows;
-
-  /* Reposition virtual buffer if at start of strip. */
-  if (post->next_row == 0) {
-    post->buffer = (*cinfo->mem->access_virt_sarray)
-	((j_common_ptr) cinfo, post->whole_image,
-	 post->starting_row, post->strip_height, FALSE);
-  }
-
-  /* Determine number of rows to emit. */
-  num_rows = post->strip_height - post->next_row; /* available in strip */
-  max_rows = out_rows_avail - *out_row_ctr; /* available in output area */
-  if (num_rows > max_rows)
-    num_rows = max_rows;
-  /* We have to check bottom of image here, can't depend on upsampler. */
-  max_rows = cinfo->output_height - post->starting_row;
-  if (num_rows > max_rows)
-    num_rows = max_rows;
-
-  /* Quantize and emit data. */
-  (*cinfo->cquantize->color_quantize) (cinfo,
-		post->buffer + post->next_row, output_buf + *out_row_ctr,
-		(int) num_rows);
-  *out_row_ctr += num_rows;
-
-  /* Advance if we filled the strip. */
-  post->next_row += num_rows;
-  if (post->next_row >= post->strip_height) {
-    post->starting_row += post->strip_height;
-    post->next_row = 0;
-  }
-}
-
-#endif /* QUANT_2PASS_SUPPORTED */
-
-
-/*
- * Initialize postprocessing controller.
- */
-
-GLOBAL(void)
-jinit_d_post_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
-{
-  my_post_ptr post;
-
-  post = (my_post_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(my_post_controller));
-  cinfo->post = (struct jpeg_d_post_controller *) post;
-  post->pub.start_pass = start_pass_dpost;
-  post->whole_image = NULL;	/* flag for no virtual arrays */
-  post->buffer = NULL;		/* flag for no strip buffer */
-
-  /* Create the quantization buffer, if needed */
-  if (cinfo->quantize_colors) {
-    /* The buffer strip height is max_v_samp_factor, which is typically
-     * an efficient number of rows for upsampling to return.
-     * (In the presence of output rescaling, we might want to be smarter?)
-     */
-    post->strip_height = (JDIMENSION) cinfo->max_v_samp_factor;
-    if (need_full_buffer) {
-      /* Two-pass color quantization: need full-image storage. */
-      /* We round up the number of rows to a multiple of the strip height. */
-#ifdef QUANT_2PASS_SUPPORTED
-      post->whole_image = (*cinfo->mem->request_virt_sarray)
-	((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
-	 cinfo->output_width * cinfo->out_color_components,
-	 (JDIMENSION) jround_up((long) cinfo->output_height,
-				(long) post->strip_height),
-	 post->strip_height);
-#else
-      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-#endif /* QUANT_2PASS_SUPPORTED */
-    } else {
-      /* One-pass color quantization: just make a strip buffer. */
-      post->buffer = (*cinfo->mem->alloc_sarray)
-	((j_common_ptr) cinfo, JPOOL_IMAGE,
-	 cinfo->output_width * cinfo->out_color_components,
-	 post->strip_height);
-    }
-  }
-}