isbn 2.0.4 → 2.0.5

data/src/jpeg-7/jctrans.c

@@ -1,381 +0,0 @@
-/*
- * jctrans.c
- *
- * Copyright (C) 1995-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains library routines for transcoding compression,
- * that is, writing raw DCT coefficient arrays to an output JPEG file.
- * The routines in jcapimin.c will also be needed by a transcoder.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Forward declarations */
-LOCAL(void) transencode_master_selection
-	JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays));
-LOCAL(void) transencode_coef_controller
-	JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays));
-
-
-/*
- * Compression initialization for writing raw-coefficient data.
- * Before calling this, all parameters and a data destination must be set up.
- * Call jpeg_finish_compress() to actually write the data.
- *
- * The number of passed virtual arrays must match cinfo->num_components.
- * Note that the virtual arrays need not be filled or even realized at
- * the time write_coefficients is called; indeed, if the virtual arrays
- * were requested from this compression object's memory manager, they
- * typically will be realized during this routine and filled afterwards.
- */
-
-GLOBAL(void)
-jpeg_write_coefficients (j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)
-{
-  if (cinfo->global_state != CSTATE_START)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-  /* Mark all tables to be written */
-  jpeg_suppress_tables(cinfo, FALSE);
-  /* (Re)initialize error mgr and destination modules */
-  (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
-  (*cinfo->dest->init_destination) (cinfo);
-  /* Perform master selection of active modules */
-  transencode_master_selection(cinfo, coef_arrays);
-  /* Wait for jpeg_finish_compress() call */
-  cinfo->next_scanline = 0;	/* so jpeg_write_marker works */
-  cinfo->global_state = CSTATE_WRCOEFS;
-}
-
-
-/*
- * Initialize the compression object with default parameters,
- * then copy from the source object all parameters needed for lossless
- * transcoding.  Parameters that can be varied without loss (such as
- * scan script and Huffman optimization) are left in their default states.
- */
-
-GLOBAL(void)
-jpeg_copy_critical_parameters (j_decompress_ptr srcinfo,
-			       j_compress_ptr dstinfo)
-{
-  JQUANT_TBL ** qtblptr;
-  jpeg_component_info *incomp, *outcomp;
-  JQUANT_TBL *c_quant, *slot_quant;
-  int tblno, ci, coefi;
-
-  /* Safety check to ensure start_compress not called yet. */
-  if (dstinfo->global_state != CSTATE_START)
-    ERREXIT1(dstinfo, JERR_BAD_STATE, dstinfo->global_state);
-  /* Copy fundamental image dimensions */
-  dstinfo->image_width = srcinfo->image_width;
-  dstinfo->image_height = srcinfo->image_height;
-  dstinfo->input_components = srcinfo->num_components;
-  dstinfo->in_color_space = srcinfo->jpeg_color_space;
-  /* Initialize all parameters to default values */
-  jpeg_set_defaults(dstinfo);
-  /* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB.
-   * Fix it to get the right header markers for the image colorspace.
-   */
-  jpeg_set_colorspace(dstinfo, srcinfo->jpeg_color_space);
-  dstinfo->data_precision = srcinfo->data_precision;
-  dstinfo->CCIR601_sampling = srcinfo->CCIR601_sampling;
-  /* Copy the source's quantization tables. */
-  for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) {
-    if (srcinfo->quant_tbl_ptrs[tblno] != NULL) {
-      qtblptr = & dstinfo->quant_tbl_ptrs[tblno];
-      if (*qtblptr == NULL)
-	*qtblptr = jpeg_alloc_quant_table((j_common_ptr) dstinfo);
-      MEMCOPY((*qtblptr)->quantval,
-	      srcinfo->quant_tbl_ptrs[tblno]->quantval,
-	      SIZEOF((*qtblptr)->quantval));
-      (*qtblptr)->sent_table = FALSE;
-    }
-  }
-  /* Copy the source's per-component info.
-   * Note we assume jpeg_set_defaults has allocated the dest comp_info array.
-   */
-  dstinfo->num_components = srcinfo->num_components;
-  if (dstinfo->num_components < 1 || dstinfo->num_components > MAX_COMPONENTS)
-    ERREXIT2(dstinfo, JERR_COMPONENT_COUNT, dstinfo->num_components,
-	     MAX_COMPONENTS);
-  for (ci = 0, incomp = srcinfo->comp_info, outcomp = dstinfo->comp_info;
-       ci < dstinfo->num_components; ci++, incomp++, outcomp++) {
-    outcomp->component_id = incomp->component_id;
-    outcomp->h_samp_factor = incomp->h_samp_factor;
-    outcomp->v_samp_factor = incomp->v_samp_factor;
-    outcomp->quant_tbl_no = incomp->quant_tbl_no;
-    /* Make sure saved quantization table for component matches the qtable
-     * slot.  If not, the input file re-used this qtable slot.
-     * IJG encoder currently cannot duplicate this.
-     */
-    tblno = outcomp->quant_tbl_no;
-    if (tblno < 0 || tblno >= NUM_QUANT_TBLS ||
-	srcinfo->quant_tbl_ptrs[tblno] == NULL)
-      ERREXIT1(dstinfo, JERR_NO_QUANT_TABLE, tblno);
-    slot_quant = srcinfo->quant_tbl_ptrs[tblno];
-    c_quant = incomp->quant_table;
-    if (c_quant != NULL) {
-      for (coefi = 0; coefi < DCTSIZE2; coefi++) {
-	if (c_quant->quantval[coefi] != slot_quant->quantval[coefi])
-	  ERREXIT1(dstinfo, JERR_MISMATCHED_QUANT_TABLE, tblno);
-      }
-    }
-    /* Note: we do not copy the source's Huffman table assignments;
-     * instead we rely on jpeg_set_colorspace to have made a suitable choice.
-     */
-  }
-  /* Also copy JFIF version and resolution information, if available.
-   * Strictly speaking this isn't "critical" info, but it's nearly
-   * always appropriate to copy it if available.  In particular,
-   * if the application chooses to copy JFIF 1.02 extension markers from
-   * the source file, we need to copy the version to make sure we don't
-   * emit a file that has 1.02 extensions but a claimed version of 1.01.
-   * We will *not*, however, copy version info from mislabeled "2.01" files.
-   */
-  if (srcinfo->saw_JFIF_marker) {
-    if (srcinfo->JFIF_major_version == 1) {
-      dstinfo->JFIF_major_version = srcinfo->JFIF_major_version;
-      dstinfo->JFIF_minor_version = srcinfo->JFIF_minor_version;
-    }
-    dstinfo->density_unit = srcinfo->density_unit;
-    dstinfo->X_density = srcinfo->X_density;
-    dstinfo->Y_density = srcinfo->Y_density;
-  }
-}
-
-
-/*
- * Master selection of compression modules for transcoding.
- * This substitutes for jcinit.c's initialization of the full compressor.
- */
-
-LOCAL(void)
-transencode_master_selection (j_compress_ptr cinfo,
-			      jvirt_barray_ptr * coef_arrays)
-{
-  /* Although we don't actually use input_components for transcoding,
-   * jcmaster.c's initial_setup will complain if input_components is 0.
-   */
-  cinfo->input_components = 1;
-  /* Initialize master control (includes parameter checking/processing) */
-  jinit_c_master_control(cinfo, TRUE /* transcode only */);
-
-  /* Entropy encoding: either Huffman or arithmetic coding. */
-  if (cinfo->arith_code) {
-    jinit_arith_encoder(cinfo);
-  } else {
-    jinit_huff_encoder(cinfo);
-  }
-
-  /* We need a special coefficient buffer controller. */
-  transencode_coef_controller(cinfo, coef_arrays);
-
-  jinit_marker_writer(cinfo);
-
-  /* We can now tell the memory manager to allocate virtual arrays. */
-  (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
-
-  /* Write the datastream header (SOI, JFIF) immediately.
-   * Frame and scan headers are postponed till later.
-   * This lets application insert special markers after the SOI.
-   */
-  (*cinfo->marker->write_file_header) (cinfo);
-}
-
-
-/*
- * The rest of this file is a special implementation of the coefficient
- * buffer controller.  This is similar to jccoefct.c, but it handles only
- * output from presupplied virtual arrays.  Furthermore, we generate any
- * dummy padding blocks on-the-fly rather than expecting them to be present
- * in the arrays.
- */
-
-/* Private buffer controller object */
-
-typedef struct {
-  struct jpeg_c_coef_controller pub; /* public fields */
-
-  JDIMENSION iMCU_row_num;	/* iMCU row # within image */
-  JDIMENSION mcu_ctr;		/* counts MCUs processed in current row */
-  int MCU_vert_offset;		/* counts MCU rows within iMCU row */
-  int MCU_rows_per_iMCU_row;	/* number of such rows needed */
-
-  /* Virtual block array for each component. */
-  jvirt_barray_ptr * whole_image;
-
-  /* Workspace for constructing dummy blocks at right/bottom edges. */
-  JBLOCKROW dummy_buffer[C_MAX_BLOCKS_IN_MCU];
-} my_coef_controller;
-
-typedef my_coef_controller * my_coef_ptr;
-
-
-LOCAL(void)
-start_iMCU_row (j_compress_ptr cinfo)
-/* Reset within-iMCU-row counters for a new row */
-{
-  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-
-  /* In an interleaved scan, an MCU row is the same as an iMCU row.
-   * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows.
-   * But at the bottom of the image, process only what's left.
-   */
-  if (cinfo->comps_in_scan > 1) {
-    coef->MCU_rows_per_iMCU_row = 1;
-  } else {
-    if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1))
-      coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor;
-    else
-      coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height;
-  }
-
-  coef->mcu_ctr = 0;
-  coef->MCU_vert_offset = 0;
-}
-
-
-/*
- * Initialize for a processing pass.
- */
-
-METHODDEF(void)
-start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
-{
-  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-
-  if (pass_mode != JBUF_CRANK_DEST)
-    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-
-  coef->iMCU_row_num = 0;
-  start_iMCU_row(cinfo);
-}
-
-
-/*
- * Process some data.
- * We process the equivalent of one fully interleaved MCU row ("iMCU" row)
- * per call, ie, v_samp_factor block rows for each component in the scan.
- * The data is obtained from the virtual arrays and fed to the entropy coder.
- * Returns TRUE if the iMCU row is completed, FALSE if suspended.
- *
- * NB: input_buf is ignored; it is likely to be a NULL pointer.
- */
-
-METHODDEF(boolean)
-compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
-{
-  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-  JDIMENSION MCU_col_num;	/* index of current MCU within row */
-  JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1;
-  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
-  int blkn, ci, xindex, yindex, yoffset, blockcnt;
-  JDIMENSION start_col;
-  JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN];
-  JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU];
-  JBLOCKROW buffer_ptr;
-  jpeg_component_info *compptr;
-
-  /* Align the virtual buffers for the components used in this scan. */
-  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-    compptr = cinfo->cur_comp_info[ci];
-    buffer[ci] = (*cinfo->mem->access_virt_barray)
-      ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index],
-       coef->iMCU_row_num * compptr->v_samp_factor,
-       (JDIMENSION) compptr->v_samp_factor, FALSE);
-  }
-
-  /* Loop to process one whole iMCU row */
-  for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
-       yoffset++) {
-    for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row;
-	 MCU_col_num++) {
-      /* Construct list of pointers to DCT blocks belonging to this MCU */
-      blkn = 0;			/* index of current DCT block within MCU */
-      for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-	compptr = cinfo->cur_comp_info[ci];
-	start_col = MCU_col_num * compptr->MCU_width;
-	blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
-						: compptr->last_col_width;
-	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
-	  if (coef->iMCU_row_num < last_iMCU_row ||
-	      yindex+yoffset < compptr->last_row_height) {
-	    /* Fill in pointers to real blocks in this row */
-	    buffer_ptr = buffer[ci][yindex+yoffset] + start_col;
-	    for (xindex = 0; xindex < blockcnt; xindex++)
-	      MCU_buffer[blkn++] = buffer_ptr++;
-	  } else {
-	    /* At bottom of image, need a whole row of dummy blocks */
-	    xindex = 0;
-	  }
-	  /* Fill in any dummy blocks needed in this row.
-	   * Dummy blocks are filled in the same way as in jccoefct.c:
-	   * all zeroes in the AC entries, DC entries equal to previous
-	   * block's DC value.  The init routine has already zeroed the
-	   * AC entries, so we need only set the DC entries correctly.
-	   */
-	  for (; xindex < compptr->MCU_width; xindex++) {
-	    MCU_buffer[blkn] = coef->dummy_buffer[blkn];
-	    MCU_buffer[blkn][0][0] = MCU_buffer[blkn-1][0][0];
-	    blkn++;
-	  }
-	}
-      }
-      /* Try to write the MCU. */
-      if (! (*cinfo->entropy->encode_mcu) (cinfo, MCU_buffer)) {
-	/* Suspension forced; update state counters and exit */
-	coef->MCU_vert_offset = yoffset;
-	coef->mcu_ctr = MCU_col_num;
-	return FALSE;
-      }
-    }
-    /* Completed an MCU row, but perhaps not an iMCU row */
-    coef->mcu_ctr = 0;
-  }
-  /* Completed the iMCU row, advance counters for next one */
-  coef->iMCU_row_num++;
-  start_iMCU_row(cinfo);
-  return TRUE;
-}
-
-
-/*
- * Initialize coefficient buffer controller.
- *
- * Each passed coefficient array must be the right size for that
- * coefficient: width_in_blocks wide and height_in_blocks high,
- * with unitheight at least v_samp_factor.
- */
-
-LOCAL(void)
-transencode_coef_controller (j_compress_ptr cinfo,
-			     jvirt_barray_ptr * coef_arrays)
-{
-  my_coef_ptr coef;
-  JBLOCKROW buffer;
-  int i;
-
-  coef = (my_coef_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(my_coef_controller));
-  cinfo->coef = (struct jpeg_c_coef_controller *) coef;
-  coef->pub.start_pass = start_pass_coef;
-  coef->pub.compress_data = compress_output;
-
-  /* Save pointer to virtual arrays */
-  coef->whole_image = coef_arrays;
-
-  /* Allocate and pre-zero space for dummy DCT blocks. */
-  buffer = (JBLOCKROW)
-    (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
-  jzero_far((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
-  for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) {
-    coef->dummy_buffer[i] = buffer + i;
-  }
-}

data/src/jpeg-7/jdapimin.c

@@ -1,396 +0,0 @@
-/*
- * jdapimin.c
- *
- * Copyright (C) 1994-1998, Thomas G. Lane.
- * Modified 2009 by Guido Vollbeding.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains application interface code for the decompression half
- * of the JPEG library.  These are the "minimum" API routines that may be
- * needed in either the normal full-decompression case or the
- * transcoding-only case.
- *
- * Most of the routines intended to be called directly by an application
- * are in this file or in jdapistd.c.  But also see jcomapi.c for routines
- * shared by compression and decompression, and jdtrans.c for the transcoding
- * case.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/*
- * Initialization of a JPEG decompression object.
- * The error manager must already be set up (in case memory manager fails).
- */
-
-GLOBAL(void)
-jpeg_CreateDecompress (j_decompress_ptr cinfo, int version, size_t structsize)
-{
-  int i;
-
-  /* Guard against version mismatches between library and caller. */
-  cinfo->mem = NULL;		/* so jpeg_destroy knows mem mgr not called */
-  if (version != JPEG_LIB_VERSION)
-    ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version);
-  if (structsize != SIZEOF(struct jpeg_decompress_struct))
-    ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, 
-	     (int) SIZEOF(struct jpeg_decompress_struct), (int) structsize);
-
-  /* For debugging purposes, we zero the whole master structure.
-   * But the application has already set the err pointer, and may have set
-   * client_data, so we have to save and restore those fields.
-   * Note: if application hasn't set client_data, tools like Purify may
-   * complain here.
-   */
-  {
-    struct jpeg_error_mgr * err = cinfo->err;
-    void * client_data = cinfo->client_data; /* ignore Purify complaint here */
-    MEMZERO(cinfo, SIZEOF(struct jpeg_decompress_struct));
-    cinfo->err = err;
-    cinfo->client_data = client_data;
-  }
-  cinfo->is_decompressor = TRUE;
-
-  /* Initialize a memory manager instance for this object */
-  jinit_memory_mgr((j_common_ptr) cinfo);
-
-  /* Zero out pointers to permanent structures. */
-  cinfo->progress = NULL;
-  cinfo->src = NULL;
-
-  for (i = 0; i < NUM_QUANT_TBLS; i++)
-    cinfo->quant_tbl_ptrs[i] = NULL;
-
-  for (i = 0; i < NUM_HUFF_TBLS; i++) {
-    cinfo->dc_huff_tbl_ptrs[i] = NULL;
-    cinfo->ac_huff_tbl_ptrs[i] = NULL;
-  }
-
-  /* Initialize marker processor so application can override methods
-   * for COM, APPn markers before calling jpeg_read_header.
-   */
-  cinfo->marker_list = NULL;
-  jinit_marker_reader(cinfo);
-
-  /* And initialize the overall input controller. */
-  jinit_input_controller(cinfo);
-
-  /* OK, I'm ready */
-  cinfo->global_state = DSTATE_START;
-}
-
-
-/*
- * Destruction of a JPEG decompression object
- */
-
-GLOBAL(void)
-jpeg_destroy_decompress (j_decompress_ptr cinfo)
-{
-  jpeg_destroy((j_common_ptr) cinfo); /* use common routine */
-}
-
-
-/*
- * Abort processing of a JPEG decompression operation,
- * but don't destroy the object itself.
- */
-
-GLOBAL(void)
-jpeg_abort_decompress (j_decompress_ptr cinfo)
-{
-  jpeg_abort((j_common_ptr) cinfo); /* use common routine */
-}
-
-
-/*
- * Set default decompression parameters.
- */
-
-LOCAL(void)
-default_decompress_parms (j_decompress_ptr cinfo)
-{
-  /* Guess the input colorspace, and set output colorspace accordingly. */
-  /* (Wish JPEG committee had provided a real way to specify this...) */
-  /* Note application may override our guesses. */
-  switch (cinfo->num_components) {
-  case 1:
-    cinfo->jpeg_color_space = JCS_GRAYSCALE;
-    cinfo->out_color_space = JCS_GRAYSCALE;
-    break;
-    
-  case 3:
-    if (cinfo->saw_JFIF_marker) {
-      cinfo->jpeg_color_space = JCS_YCbCr; /* JFIF implies YCbCr */
-    } else if (cinfo->saw_Adobe_marker) {
-      switch (cinfo->Adobe_transform) {
-      case 0:
-	cinfo->jpeg_color_space = JCS_RGB;
-	break;
-      case 1:
-	cinfo->jpeg_color_space = JCS_YCbCr;
-	break;
-      default:
-	WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform);
-	cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */
-	break;
-      }
-    } else {
-      /* Saw no special markers, try to guess from the component IDs */
-      int cid0 = cinfo->comp_info[0].component_id;
-      int cid1 = cinfo->comp_info[1].component_id;
-      int cid2 = cinfo->comp_info[2].component_id;
-
-      if (cid0 == 1 && cid1 == 2 && cid2 == 3)
-	cinfo->jpeg_color_space = JCS_YCbCr; /* assume JFIF w/out marker */
-      else if (cid0 == 82 && cid1 == 71 && cid2 == 66)
-	cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */
-      else {
-	TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2);
-	cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */
-      }
-    }
-    /* Always guess RGB is proper output colorspace. */
-    cinfo->out_color_space = JCS_RGB;
-    break;
-    
-  case 4:
-    if (cinfo->saw_Adobe_marker) {
-      switch (cinfo->Adobe_transform) {
-      case 0:
-	cinfo->jpeg_color_space = JCS_CMYK;
-	break;
-      case 2:
-	cinfo->jpeg_color_space = JCS_YCCK;
-	break;
-      default:
-	WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform);
-	cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */
-	break;
-      }
-    } else {
-      /* No special markers, assume straight CMYK. */
-      cinfo->jpeg_color_space = JCS_CMYK;
-    }
-    cinfo->out_color_space = JCS_CMYK;
-    break;
-    
-  default:
-    cinfo->jpeg_color_space = JCS_UNKNOWN;
-    cinfo->out_color_space = JCS_UNKNOWN;
-    break;
-  }
-
-  /* Set defaults for other decompression parameters. */
-  cinfo->scale_num = DCTSIZE;		/* 1:1 scaling */
-  cinfo->scale_denom = DCTSIZE;
-  cinfo->output_gamma = 1.0;
-  cinfo->buffered_image = FALSE;
-  cinfo->raw_data_out = FALSE;
-  cinfo->dct_method = JDCT_DEFAULT;
-  cinfo->do_fancy_upsampling = TRUE;
-  cinfo->do_block_smoothing = TRUE;
-  cinfo->quantize_colors = FALSE;
-  /* We set these in case application only sets quantize_colors. */
-  cinfo->dither_mode = JDITHER_FS;
-#ifdef QUANT_2PASS_SUPPORTED
-  cinfo->two_pass_quantize = TRUE;
-#else
-  cinfo->two_pass_quantize = FALSE;
-#endif
-  cinfo->desired_number_of_colors = 256;
-  cinfo->colormap = NULL;
-  /* Initialize for no mode change in buffered-image mode. */
-  cinfo->enable_1pass_quant = FALSE;
-  cinfo->enable_external_quant = FALSE;
-  cinfo->enable_2pass_quant = FALSE;
-}
-
-
-/*
- * Decompression startup: read start of JPEG datastream to see what's there.
- * Need only initialize JPEG object and supply a data source before calling.
- *
- * This routine will read as far as the first SOS marker (ie, actual start of
- * compressed data), and will save all tables and parameters in the JPEG
- * object.  It will also initialize the decompression parameters to default
- * values, and finally return JPEG_HEADER_OK.  On return, the application may
- * adjust the decompression parameters and then call jpeg_start_decompress.
- * (Or, if the application only wanted to determine the image parameters,
- * the data need not be decompressed.  In that case, call jpeg_abort or
- * jpeg_destroy to release any temporary space.)
- * If an abbreviated (tables only) datastream is presented, the routine will
- * return JPEG_HEADER_TABLES_ONLY upon reaching EOI.  The application may then
- * re-use the JPEG object to read the abbreviated image datastream(s).
- * It is unnecessary (but OK) to call jpeg_abort in this case.
- * The JPEG_SUSPENDED return code only occurs if the data source module
- * requests suspension of the decompressor.  In this case the application
- * should load more source data and then re-call jpeg_read_header to resume
- * processing.
- * If a non-suspending data source is used and require_image is TRUE, then the
- * return code need not be inspected since only JPEG_HEADER_OK is possible.
- *
- * This routine is now just a front end to jpeg_consume_input, with some
- * extra error checking.
- */
-
-GLOBAL(int)
-jpeg_read_header (j_decompress_ptr cinfo, boolean require_image)
-{
-  int retcode;
-
-  if (cinfo->global_state != DSTATE_START &&
-      cinfo->global_state != DSTATE_INHEADER)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
-  retcode = jpeg_consume_input(cinfo);
-
-  switch (retcode) {
-  case JPEG_REACHED_SOS:
-    retcode = JPEG_HEADER_OK;
-    break;
-  case JPEG_REACHED_EOI:
-    if (require_image)		/* Complain if application wanted an image */
-      ERREXIT(cinfo, JERR_NO_IMAGE);
-    /* Reset to start state; it would be safer to require the application to
-     * call jpeg_abort, but we can't change it now for compatibility reasons.
-     * A side effect is to free any temporary memory (there shouldn't be any).
-     */
-    jpeg_abort((j_common_ptr) cinfo); /* sets state = DSTATE_START */
-    retcode = JPEG_HEADER_TABLES_ONLY;
-    break;
-  case JPEG_SUSPENDED:
-    /* no work */
-    break;
-  }
-
-  return retcode;
-}
-
-
-/*
- * Consume data in advance of what the decompressor requires.
- * This can be called at any time once the decompressor object has
- * been created and a data source has been set up.
- *
- * This routine is essentially a state machine that handles a couple
- * of critical state-transition actions, namely initial setup and
- * transition from header scanning to ready-for-start_decompress.
- * All the actual input is done via the input controller's consume_input
- * method.
- */
-
-GLOBAL(int)
-jpeg_consume_input (j_decompress_ptr cinfo)
-{
-  int retcode = JPEG_SUSPENDED;
-
-  /* NB: every possible DSTATE value should be listed in this switch */
-  switch (cinfo->global_state) {
-  case DSTATE_START:
-    /* Start-of-datastream actions: reset appropriate modules */
-    (*cinfo->inputctl->reset_input_controller) (cinfo);
-    /* Initialize application's data source module */
-    (*cinfo->src->init_source) (cinfo);
-    cinfo->global_state = DSTATE_INHEADER;
-    /*FALLTHROUGH*/
-  case DSTATE_INHEADER:
-    retcode = (*cinfo->inputctl->consume_input) (cinfo);
-    if (retcode == JPEG_REACHED_SOS) { /* Found SOS, prepare to decompress */
-      /* Set up default parameters based on header data */
-      default_decompress_parms(cinfo);
-      /* Set global state: ready for start_decompress */
-      cinfo->global_state = DSTATE_READY;
-    }
-    break;
-  case DSTATE_READY:
-    /* Can't advance past first SOS until start_decompress is called */
-    retcode = JPEG_REACHED_SOS;
-    break;
-  case DSTATE_PRELOAD:
-  case DSTATE_PRESCAN:
-  case DSTATE_SCANNING:
-  case DSTATE_RAW_OK:
-  case DSTATE_BUFIMAGE:
-  case DSTATE_BUFPOST:
-  case DSTATE_STOPPING:
-    retcode = (*cinfo->inputctl->consume_input) (cinfo);
-    break;
-  default:
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-  }
-  return retcode;
-}
-
-
-/*
- * Have we finished reading the input file?
- */
-
-GLOBAL(boolean)
-jpeg_input_complete (j_decompress_ptr cinfo)
-{
-  /* Check for valid jpeg object */
-  if (cinfo->global_state < DSTATE_START ||
-      cinfo->global_state > DSTATE_STOPPING)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-  return cinfo->inputctl->eoi_reached;
-}
-
-
-/*
- * Is there more than one scan?
- */
-
-GLOBAL(boolean)
-jpeg_has_multiple_scans (j_decompress_ptr cinfo)
-{
-  /* Only valid after jpeg_read_header completes */
-  if (cinfo->global_state < DSTATE_READY ||
-      cinfo->global_state > DSTATE_STOPPING)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-  return cinfo->inputctl->has_multiple_scans;
-}
-
-
-/*
- * Finish JPEG decompression.
- *
- * This will normally just verify the file trailer and release temp storage.
- *
- * Returns FALSE if suspended.  The return value need be inspected only if
- * a suspending data source is used.
- */
-
-GLOBAL(boolean)
-jpeg_finish_decompress (j_decompress_ptr cinfo)
-{
-  if ((cinfo->global_state == DSTATE_SCANNING ||
-       cinfo->global_state == DSTATE_RAW_OK) && ! cinfo->buffered_image) {
-    /* Terminate final pass of non-buffered mode */
-    if (cinfo->output_scanline < cinfo->output_height)
-      ERREXIT(cinfo, JERR_TOO_LITTLE_DATA);
-    (*cinfo->master->finish_output_pass) (cinfo);
-    cinfo->global_state = DSTATE_STOPPING;
-  } else if (cinfo->global_state == DSTATE_BUFIMAGE) {
-    /* Finishing after a buffered-image operation */
-    cinfo->global_state = DSTATE_STOPPING;
-  } else if (cinfo->global_state != DSTATE_STOPPING) {
-    /* STOPPING = repeat call after a suspension, anything else is error */
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-  }
-  /* Read until EOI */
-  while (! cinfo->inputctl->eoi_reached) {
-    if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED)
-      return FALSE;		/* Suspend, come back later */
-  }
-  /* Do final cleanup */
-  (*cinfo->src->term_source) (cinfo);
-  /* We can use jpeg_abort to release memory and reset global_state */
-  jpeg_abort((j_common_ptr) cinfo);
-  return TRUE;
-}