grpc 0.12.0 → 0.13.0.pre1.1

data/third_party/boringssl/include/openssl/safestack.h

@@ -0,0 +1,16 @@
+/* Copyright (c) 2014, Google Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */
+
+/* This header is provided in order to make compiling against code that expects
+   OpenSSL easier. */

data/third_party/boringssl/include/openssl/sha.h

@@ -0,0 +1,256 @@
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.] */
+
+#ifndef OPENSSL_HEADER_SHA_H
+#define OPENSSL_HEADER_SHA_H
+
+#include <openssl/base.h>
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+
+/* The SHA family of hash functions (SHA-1 and SHA-2). */
+
+
+/* SHA_CBLOCK is the block size of SHA-1. */
+#define SHA_CBLOCK 64
+
+/* SHA_DIGEST_LENGTH is the length of a SHA-1 digest. */
+#define SHA_DIGEST_LENGTH 20
+
+/* TODO(fork): remove */
+#define SHA_LBLOCK 16
+#define SHA_LONG uint32_t
+
+/* SHA1_Init initialises |sha| and returns one. */
+OPENSSL_EXPORT int SHA1_Init(SHA_CTX *sha);
+
+/* SHA1_Update adds |len| bytes from |data| to |sha| and returns one. */
+OPENSSL_EXPORT int SHA1_Update(SHA_CTX *sha, const void *data, size_t len);
+
+/* SHA1_Final adds the final padding to |sha| and writes the resulting digest
+ * to |md|, which must have at least |SHA_DIGEST_LENGTH| bytes of space. It
+ * returns one. */
+OPENSSL_EXPORT int SHA1_Final(uint8_t *md, SHA_CTX *sha);
+
+/* SHA1 writes the digest of |len| bytes from |data| to |out| and returns
+ * |out|. There must be at least |SHA_DIGEST_LENGTH| bytes of space in
+ * |out|. */
+OPENSSL_EXPORT uint8_t *SHA1(const uint8_t *data, size_t len, uint8_t *out);
+
+/* SHA1_Transform is a low-level function that performs a single, SHA-1 block
+ * transformation using the state from |sha| and 64 bytes from |block|. */
+OPENSSL_EXPORT void SHA1_Transform(SHA_CTX *sha, const uint8_t *block);
+
+struct sha_state_st {
+#if defined(OPENSSL_WINDOWS)
+  uint32_t h[5];
+#else
+  /* wpa_supplicant accesses |h0|..|h4| so we must support those names
+   * for compatibility with it until it can be updated. */
+  union {
+    uint32_t h[5];
+    struct {
+      uint32_t h0;
+      uint32_t h1;
+      uint32_t h2;
+      uint32_t h3;
+      uint32_t h4;
+    };
+  };
+#endif
+  uint32_t Nl, Nh;
+  uint8_t data[SHA_CBLOCK];
+  unsigned num;
+};
+
+
+/* SHA-224. */
+
+/* SHA224_CBLOCK is the block size of SHA-224. */
+#define SHA224_CBLOCK 64
+
+/* SHA224_DIGEST_LENGTH is the length of a SHA-224 digest. */
+#define SHA224_DIGEST_LENGTH 28
+
+/* SHA224_Init initialises |sha| and returns 1. */
+OPENSSL_EXPORT int SHA224_Init(SHA256_CTX *sha);
+
+/* SHA224_Update adds |len| bytes from |data| to |sha| and returns 1. */
+OPENSSL_EXPORT int SHA224_Update(SHA256_CTX *sha, const void *data, size_t len);
+
+/* SHA224_Final adds the final padding to |sha| and writes the resulting digest
+ * to |md|, which must have at least |SHA224_DIGEST_LENGTH| bytes of space. It
+ * returns one on success and zero on programmer error. */
+OPENSSL_EXPORT int SHA224_Final(uint8_t *md, SHA256_CTX *sha);
+
+/* SHA224 writes the digest of |len| bytes from |data| to |out| and returns
+ * |out|. There must be at least |SHA224_DIGEST_LENGTH| bytes of space in
+ * |out|. */
+OPENSSL_EXPORT uint8_t *SHA224(const uint8_t *data, size_t len, uint8_t *out);
+
+
+/* SHA-256. */
+
+/* SHA256_CBLOCK is the block size of SHA-256. */
+#define SHA256_CBLOCK 64
+
+/* SHA256_DIGEST_LENGTH is the length of a SHA-256 digest. */
+#define SHA256_DIGEST_LENGTH 32
+
+/* SHA256_Init initialises |sha| and returns 1. */
+OPENSSL_EXPORT int SHA256_Init(SHA256_CTX *sha);
+
+/* SHA256_Update adds |len| bytes from |data| to |sha| and returns 1. */
+OPENSSL_EXPORT int SHA256_Update(SHA256_CTX *sha, const void *data, size_t len);
+
+/* SHA256_Final adds the final padding to |sha| and writes the resulting digest
+ * to |md|, which must have at least |SHA256_DIGEST_LENGTH| bytes of space. It
+ * returns one on success and zero on programmer error. */
+OPENSSL_EXPORT int SHA256_Final(uint8_t *md, SHA256_CTX *sha);
+
+/* SHA256 writes the digest of |len| bytes from |data| to |out| and returns
+ * |out|. There must be at least |SHA256_DIGEST_LENGTH| bytes of space in
+ * |out|. */
+OPENSSL_EXPORT uint8_t *SHA256(const uint8_t *data, size_t len, uint8_t *out);
+
+/* SHA256_Transform is a low-level function that performs a single, SHA-1 block
+ * transformation using the state from |sha| and 64 bytes from |block|. */
+OPENSSL_EXPORT void SHA256_Transform(SHA256_CTX *sha, const uint8_t *data);
+
+struct sha256_state_st {
+  uint32_t h[8];
+  uint32_t Nl, Nh;
+  uint8_t data[SHA256_CBLOCK];
+  unsigned num, md_len;
+};
+
+
+/* SHA-384. */
+
+/* SHA384_CBLOCK is the block size of SHA-384. */
+#define SHA384_CBLOCK 128
+
+/* SHA384_DIGEST_LENGTH is the length of a SHA-384 digest. */
+#define SHA384_DIGEST_LENGTH 48
+
+/* SHA384_Init initialises |sha| and returns 1. */
+OPENSSL_EXPORT int SHA384_Init(SHA512_CTX *sha);
+
+/* SHA384_Update adds |len| bytes from |data| to |sha| and returns 1. */
+OPENSSL_EXPORT int SHA384_Update(SHA512_CTX *sha, const void *data, size_t len);
+
+/* SHA384_Final adds the final padding to |sha| and writes the resulting digest
+ * to |md|, which must have at least |SHA384_DIGEST_LENGTH| bytes of space. It
+ * returns one on success and zero on programmer error. */
+OPENSSL_EXPORT int SHA384_Final(uint8_t *md, SHA512_CTX *sha);
+
+/* SHA384 writes the digest of |len| bytes from |data| to |out| and returns
+ * |out|. There must be at least |SHA384_DIGEST_LENGTH| bytes of space in
+ * |out|. */
+OPENSSL_EXPORT uint8_t *SHA384(const uint8_t *data, size_t len, uint8_t *out);
+
+/* SHA384_Transform is a low-level function that performs a single, SHA-1 block
+ * transformation using the state from |sha| and 64 bytes from |block|. */
+OPENSSL_EXPORT void SHA384_Transform(SHA512_CTX *sha, const uint8_t *data);
+
+
+/* SHA-512. */
+
+/* SHA512_CBLOCK is the block size of SHA-512. */
+#define SHA512_CBLOCK 128
+
+/* SHA512_DIGEST_LENGTH is the length of a SHA-512 digest. */
+#define SHA512_DIGEST_LENGTH 64
+
+/* SHA512_Init initialises |sha| and returns 1. */
+OPENSSL_EXPORT int SHA512_Init(SHA512_CTX *sha);
+
+/* SHA512_Update adds |len| bytes from |data| to |sha| and returns 1. */
+OPENSSL_EXPORT int SHA512_Update(SHA512_CTX *sha, const void *data, size_t len);
+
+/* SHA512_Final adds the final padding to |sha| and writes the resulting digest
+ * to |md|, which must have at least |SHA512_DIGEST_LENGTH| bytes of space. It
+ * returns one on success and zero on programmer error. */
+OPENSSL_EXPORT int SHA512_Final(uint8_t *md, SHA512_CTX *sha);
+
+/* SHA512 writes the digest of |len| bytes from |data| to |out| and returns
+ * |out|. There must be at least |SHA512_DIGEST_LENGTH| bytes of space in
+ * |out|. */
+OPENSSL_EXPORT uint8_t *SHA512(const uint8_t *data, size_t len, uint8_t *out);
+
+/* SHA512_Transform is a low-level function that performs a single, SHA-1 block
+ * transformation using the state from |sha| and 64 bytes from |block|. */
+OPENSSL_EXPORT void SHA512_Transform(SHA512_CTX *sha, const uint8_t *data);
+
+struct sha512_state_st {
+  uint64_t h[8];
+  uint64_t Nl, Nh;
+  union {
+    uint64_t d[16];
+    uint8_t p[128];
+  } u;
+  unsigned num, md_len;
+};
+
+
+#if defined(__cplusplus)
+}  /* extern C */
+#endif
+
+#endif  /* OPENSSL_HEADER_SHA_H */

data/third_party/boringssl/include/openssl/srtp.h

@@ -0,0 +1,18 @@
+/* Copyright (c) 2015, Google Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */
+
+/* This header is provided in order to make compiling against code that expects
+   OpenSSL easier. */
+
+#include "ssl.h"

data/third_party/boringssl/include/openssl/ssl.h

@@ -0,0 +1,4466 @@
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+/* ====================================================================
+ * Copyright (c) 1998-2007 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+/* ====================================================================
+ * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
+ * ECC cipher suite support in OpenSSL originally developed by
+ * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
+ */
+/* ====================================================================
+ * Copyright 2005 Nokia. All rights reserved.
+ *
+ * The portions of the attached software ("Contribution") is developed by
+ * Nokia Corporation and is licensed pursuant to the OpenSSL open source
+ * license.
+ *
+ * The Contribution, originally written by Mika Kousa and Pasi Eronen of
+ * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites
+ * support (see RFC 4279) to OpenSSL.
+ *
+ * No patent licenses or other rights except those expressly stated in
+ * the OpenSSL open source license shall be deemed granted or received
+ * expressly, by implication, estoppel, or otherwise.
+ *
+ * No assurances are provided by Nokia that the Contribution does not
+ * infringe the patent or other intellectual property rights of any third
+ * party or that the license provides you with all the necessary rights
+ * to make use of the Contribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN
+ * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA
+ * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY
+ * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR
+ * OTHERWISE.
+ */
+
+#ifndef OPENSSL_HEADER_SSL_H
+#define OPENSSL_HEADER_SSL_H
+
+#include <openssl/base.h>
+
+#include <openssl/bio.h>
+#include <openssl/buf.h>
+#include <openssl/hmac.h>
+#include <openssl/lhash.h>
+#include <openssl/pem.h>
+#include <openssl/ssl3.h>
+#include <openssl/thread.h>
+#include <openssl/tls1.h>
+#include <openssl/x509.h>
+
+#if !defined(OPENSSL_WINDOWS)
+#include <sys/time.h>
+#endif
+
+/* wpa_supplicant expects to get the version functions from ssl.h */
+#include <openssl/crypto.h>
+
+/* Forward-declare struct timeval. On Windows, it is defined in winsock2.h and
+ * Windows headers define too many macros to be included in public headers.
+ * However, only a forward declaration is needed. */
+struct timeval;
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+
+/* SSL implementation. */
+
+
+/* SSL contexts.
+ *
+ * |SSL_CTX| objects manage shared state and configuration between multiple TLS
+ * or DTLS connections. Whether the connections are TLS or DTLS is selected by
+ * an |SSL_METHOD| on creation.
+ *
+ * |SSL_CTX| are reference-counted and may be shared by connections across
+ * multiple threads. Once shared, functions which change the |SSL_CTX|'s
+ * configuration may not be used. */
+
+/* TLS_method is the |SSL_METHOD| used for TLS (and SSLv3) connections. */
+OPENSSL_EXPORT const SSL_METHOD *TLS_method(void);
+
+/* DTLS_method is the |SSL_METHOD| used for DTLS connections. */
+OPENSSL_EXPORT const SSL_METHOD *DTLS_method(void);
+
+/* SSL_CTX_new returns a newly-allocated |SSL_CTX| with default settings or NULL
+ * on error. */
+OPENSSL_EXPORT SSL_CTX *SSL_CTX_new(const SSL_METHOD *method);
+
+/* SSL_CTX_free releases memory associated with |ctx|. */
+OPENSSL_EXPORT void SSL_CTX_free(SSL_CTX *ctx);
+
+
+/* SSL connections.
+ *
+ * An |SSL| object represents a single TLS or DTLS connection. Although the
+ * shared |SSL_CTX| is thread-safe, an |SSL| is not thread-safe and may only be
+ * used on one thread at a time. */
+
+/* SSL_new returns a newly-allocated |SSL| using |ctx| or NULL on error. The new
+ * connection inherits settings from |ctx| at the time of creation. Settings may
+ * also be individually configured on the connection.
+ *
+ * On creation, an |SSL| is not configured to be either a client or server. Call
+ * |SSL_set_connect_state| or |SSL_set_accept_state| to set this. */
+OPENSSL_EXPORT SSL *SSL_new(SSL_CTX *ctx);
+
+/* SSL_free releases memory associated with |ssl|. */
+OPENSSL_EXPORT void SSL_free(SSL *ssl);
+
+/* SSL_get_SSL_CTX returns the |SSL_CTX| associated with |ssl|. If
+ * |SSL_set_SSL_CTX| is called, it returns the new |SSL_CTX|, not the initial
+ * one. */
+OPENSSL_EXPORT SSL_CTX *SSL_get_SSL_CTX(const SSL *ssl);
+
+/* SSL_set_connect_state configures |ssl| to be a client. */
+OPENSSL_EXPORT void SSL_set_connect_state(SSL *ssl);
+
+/* SSL_set_accept_state configures |ssl| to be a server. */
+OPENSSL_EXPORT void SSL_set_accept_state(SSL *ssl);
+
+/* SSL_is_server returns one if |ssl| is configured as a server and zero
+ * otherwise. */
+OPENSSL_EXPORT int SSL_is_server(SSL *ssl);
+
+/* SSL_set_bio configures |ssl| to read from |rbio| and write to |wbio|. |ssl|
+ * takes ownership of the two |BIO|s. If |rbio| and |wbio| are the same, |ssl|
+ * only takes ownership of one reference.
+ *
+ * In DTLS, if |rbio| is blocking, it must handle
+ * |BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT| control requests to set read timeouts.
+ *
+ * Calling this function on an already-configured |ssl| is deprecated. */
+OPENSSL_EXPORT void SSL_set_bio(SSL *ssl, BIO *rbio, BIO *wbio);
+
+/* SSL_get_rbio returns the |BIO| that |ssl| reads from. */
+OPENSSL_EXPORT BIO *SSL_get_rbio(const SSL *ssl);
+
+/* SSL_get_wbio returns the |BIO| that |ssl| writes to. */
+OPENSSL_EXPORT BIO *SSL_get_wbio(const SSL *ssl);
+
+/* SSL_get_fd calls |SSL_get_rfd|. */
+OPENSSL_EXPORT int SSL_get_fd(const SSL *ssl);
+
+/* SSL_get_rfd returns the file descriptor that |ssl| is configured to read
+ * from. If |ssl|'s read |BIO| is not configured or doesn't wrap a file
+ * descriptor then it returns -1. */
+OPENSSL_EXPORT int SSL_get_rfd(const SSL *ssl);
+
+/* SSL_get_wfd returns the file descriptor that |ssl| is configured to write
+ * to. If |ssl|'s write |BIO| is not configured or doesn't wrap a file
+ * descriptor then it returns -1. */
+OPENSSL_EXPORT int SSL_get_wfd(const SSL *ssl);
+
+/* SSL_set_fd configures |ssl| to read from and write to |fd|. It returns one
+ * on success and zero on allocation error. The caller retains ownership of
+ * |fd|. */
+OPENSSL_EXPORT int SSL_set_fd(SSL *ssl, int fd);
+
+/* SSL_set_rfd configures |ssl| to read from |fd|. It returns one on success and
+ * zero on allocation error. The caller retains ownership of |fd|. */
+OPENSSL_EXPORT int SSL_set_rfd(SSL *ssl, int fd);
+
+/* SSL_set_wfd configures |ssl| to write to |fd|. It returns one on success and
+ * zero on allocation error. The caller retains ownership of |fd|. */
+OPENSSL_EXPORT int SSL_set_wfd(SSL *ssl, int fd);
+
+/* SSL_do_handshake continues the current handshake. If there is none or the
+ * handshake has completed or False Started, it returns one. Otherwise, it
+ * returns <= 0. The caller should pass the value into |SSL_get_error| to
+ * determine how to proceed.
+ *
+ * In DTLS, if the read |BIO| is non-blocking, the caller must drive
+ * retransmissions. Whenever |SSL_get_error| signals |SSL_ERROR_WANT_READ|, use
+ * |DTLSv1_get_timeout| to determine the current timeout. If it expires before
+ * the next retry, call |DTLSv1_handle_timeout|. Note that DTLS handshake
+ * retransmissions use fresh sequence numbers, so it is not sufficient to replay
+ * packets at the transport.
+ *
+ * TODO(davidben): Ensure 0 is only returned on transport EOF.
+ * https://crbug.com/466303. */
+OPENSSL_EXPORT int SSL_do_handshake(SSL *ssl);
+
+/* SSL_connect configures |ssl| as a client, if unconfigured, and calls
+ * |SSL_do_handshake|. */
+OPENSSL_EXPORT int SSL_connect(SSL *ssl);
+
+/* SSL_accept configures |ssl| as a server, if unconfigured, and calls
+ * |SSL_do_handshake|. */
+OPENSSL_EXPORT int SSL_accept(SSL *ssl);
+
+/* SSL_read reads up to |num| bytes from |ssl| into |buf|. It implicitly runs
+ * any pending handshakes, including renegotiations when enabled. On success, it
+ * returns the number of bytes read. Otherwise, it returns <= 0. The caller
+ * should pass the value into |SSL_get_error| to determine how to proceed.
+ *
+ * TODO(davidben): Ensure 0 is only returned on transport EOF.
+ * https://crbug.com/466303. */
+OPENSSL_EXPORT int SSL_read(SSL *ssl, void *buf, int num);
+
+/* SSL_peek behaves like |SSL_read| but does not consume any bytes returned. */
+OPENSSL_EXPORT int SSL_peek(SSL *ssl, void *buf, int num);
+
+/* SSL_pending returns the number of bytes available in |ssl|. It does not read
+ * from the transport. */
+OPENSSL_EXPORT int SSL_pending(const SSL *ssl);
+
+/* SSL_write writes up to |num| bytes from |buf| into |ssl|. It implicitly runs
+ * any pending handshakes, including renegotiations when enabled. On success, it
+ * returns the number of bytes read. Otherwise, it returns <= 0. The caller
+ * should pass the value into |SSL_get_error| to determine how to proceed.
+ *
+ * In TLS, a non-blocking |SSL_write| differs from non-blocking |write| in that
+ * a failed |SSL_write| still commits to the data passed in. When retrying, the
+ * caller must supply the original write buffer (or a larger one containing the
+ * original as a prefix). By default, retries will fail if they also do not
+ * reuse the same |buf| pointer. This may be relaxed with
+ * |SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER|, but the buffer contents still must be
+ * unchanged.
+ *
+ * By default, in TLS, |SSL_write| will not return success until all |num| bytes
+ * are written. This may be relaxed with |SSL_MODE_ENABLE_PARTIAL_WRITE|. It
+ * allows |SSL_write| to complete with a partial result when only part of the
+ * input was written in a single record.
+ *
+ * In DTLS, neither |SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER| and
+ * |SSL_MODE_ENABLE_PARTIAL_WRITE| do anything. The caller may retry with a
+ * different buffer freely. A single call to |SSL_write| only ever writes a
+ * single record in a single packet, so |num| must be at most
+ * |SSL3_RT_MAX_PLAIN_LENGTH|.
+ *
+ * TODO(davidben): Ensure 0 is only returned on transport EOF.
+ * https://crbug.com/466303. */
+OPENSSL_EXPORT int SSL_write(SSL *ssl, const void *buf, int num);
+
+/* SSL_shutdown shuts down |ssl|. On success, it completes in two stages. First,
+ * it returns 0 if |ssl| completed uni-directional shutdown; close_notify has
+ * been sent, but the peer's close_notify has not been received. Most callers
+ * may stop at this point. For bi-directional shutdown, call |SSL_shutdown|
+ * again. It returns 1 if close_notify has been both sent and received.
+ *
+ * If the peer's close_notify arrived first, the first stage is skipped.
+ * |SSL_shutdown| will return 1 once close_notify is sent and skip 0. Callers
+ * only interested in uni-directional shutdown must therefore allow for the
+ * first stage returning either 0 or 1.
+ *
+ * |SSL_shutdown| returns -1 on failure. The caller should pass the return value
+ * into |SSL_get_error| to determine how to proceed. If the underlying |BIO| is
+ * non-blocking, both stages may require retry.
+ *
+ * |SSL_shutdown| must be called to retain |ssl|'s session in the session
+ * cache. Use |SSL_CTX_set_quiet_shutdown| to configure |SSL_shutdown| to
+ * neither send nor wait for close_notify but still retain the session.
+ *
+ * TODO(davidben): Is there any point in the session cache interaction? Remove
+ * it? */
+OPENSSL_EXPORT int SSL_shutdown(SSL *ssl);
+
+/* SSL_CTX_set_quiet_shutdown sets quiet shutdown on |ctx| to |mode|. If
+ * enabled, |SSL_shutdown| will not send a close_notify alert or wait for one
+ * from the peer. It will instead synchronously return one. */
+OPENSSL_EXPORT void SSL_CTX_set_quiet_shutdown(SSL_CTX *ctx, int mode);
+
+/* SSL_CTX_get_quiet_shutdown returns whether quiet shutdown is enabled for
+ * |ctx|. */
+OPENSSL_EXPORT int SSL_CTX_get_quiet_shutdown(const SSL_CTX *ctx);
+
+/* SSL_set_quiet_shutdown sets quiet shutdown on |ssl| to |mode|. If enabled,
+ * |SSL_shutdown| will not send a close_notify alert or wait for one from the
+ * peer. It will instead synchronously return one. */
+OPENSSL_EXPORT void SSL_set_quiet_shutdown(SSL *ssl, int mode);
+
+/* SSL_get_quiet_shutdown returns whether quiet shutdown is enabled for
+ * |ssl|. */
+OPENSSL_EXPORT int SSL_get_quiet_shutdown(const SSL *ssl);
+
+/* SSL_get_error returns a |SSL_ERROR_*| value for the most recent operation on
+ * |ssl|. It should be called after an operation failed to determine whether the
+ * error was fatal and, if not, when to retry. */
+OPENSSL_EXPORT int SSL_get_error(const SSL *ssl, int ret_code);
+
+/* SSL_ERROR_NONE indicates the operation succeeded. */
+#define SSL_ERROR_NONE 0
+
+/* SSL_ERROR_SSL indicates the operation failed within the library. The caller
+ * may inspect the error queue for more information. */
+#define SSL_ERROR_SSL 1
+
+/* SSL_ERROR_WANT_READ indicates the operation failed attempting to read from
+ * the transport. The caller may retry the operation when the transport is ready
+ * for reading.
+ *
+ * If signaled by a DTLS handshake, the caller must also call
+ * |DTLSv1_get_timeout| and |DTLSv1_handle_timeout| as appropriate. See
+ * |SSL_do_handshake|. */
+#define SSL_ERROR_WANT_READ 2
+
+/* SSL_ERROR_WANT_WRITE indicates the operation failed attempting to write to
+ * the transport. The caller may retry the operation when the transport is ready
+ * for writing. */
+#define SSL_ERROR_WANT_WRITE 3
+
+/* SSL_ERROR_WANT_X509_LOOKUP indicates the operation failed in calling the
+ * |cert_cb| or |client_cert_cb|. The caller may retry the operation when the
+ * callback is ready to return a certificate or one has been configured
+ * externally.
+ *
+ * See also |SSL_CTX_set_cert_cb| and |SSL_CTX_set_client_cert_cb|. */
+#define SSL_ERROR_WANT_X509_LOOKUP 4
+
+/* SSL_ERROR_WANT_SYSCALL indicates the operation failed externally to the
+ * library. The caller should consult the system-specific error mechanism. This
+ * is typically |errno| but may be something custom if using a custom |BIO|. It
+ * may also be signaled if the transport returned EOF, in which case the
+ * operation's return value will be zero. */
+#define SSL_ERROR_SYSCALL 5
+
+/* SSL_ERROR_ZERO_RETURN indicates the operation failed because the connection
+ * was cleanly shut down with a close_notify alert. */
+#define SSL_ERROR_ZERO_RETURN 6
+
+/* SSL_ERROR_WANT_CONNECT indicates the operation failed attempting to connect
+ * the transport (the |BIO| signaled |BIO_RR_CONNECT|). The caller may retry the
+ * operation when the transport is ready. */
+#define SSL_ERROR_WANT_CONNECT 7
+
+/* SSL_ERROR_WANT_ACCEPT indicates the operation failed attempting to accept a
+ * connection from the transport (the |BIO| signaled |BIO_RR_ACCEPT|). The
+ * caller may retry the operation when the transport is ready.
+ *
+ * TODO(davidben): Remove this. It's used by accept BIOs which are bizarre. */
+#define SSL_ERROR_WANT_ACCEPT 8
+
+/* SSL_ERROR_WANT_CHANNEL_ID_LOOKUP indicates the operation failed looking up
+ * the Channel ID key. The caller may retry the operation when |channel_id_cb|
+ * is ready to return a key or one has been configured with
+ * |SSL_set1_tls_channel_id|.
+ *
+ * See also |SSL_CTX_set_channel_id_cb|. */
+#define SSL_ERROR_WANT_CHANNEL_ID_LOOKUP 9
+
+/* SSL_ERROR_PENDING_SESSION indicates the operation failed because the session
+ * lookup callback indicated the session was unavailable. The caller may retry
+ * the operation when lookup has completed.
+ *
+ * See also |SSL_CTX_sess_set_get_cb| and |SSL_magic_pending_session_ptr|. */
+#define SSL_ERROR_PENDING_SESSION 11
+
+/* SSL_ERROR_PENDING_CERTIFICATE indicates the operation failed because the
+ * early callback indicated certificate lookup was incomplete. The caller may
+ * retry the operation when lookup has completed. Note: when the operation is
+ * retried, the early callback will not be called a second time.
+ *
+ * See also |SSL_CTX_set_select_certificate_cb|. */
+#define SSL_ERROR_PENDING_CERTIFICATE 12
+
+/* SSL_ERROR_WANT_PRIVATE_KEY_OPERATION indicates the operation failed because
+ * a private key operation was unfinished. The caller may retry the operation
+ * when the private key operation is complete.
+ *
+ * See also |SSL_set_private_key_method|. */
+#define SSL_ERROR_WANT_PRIVATE_KEY_OPERATION 13
+
+/* SSL_set_mtu sets the |ssl|'s MTU in DTLS to |mtu|. It returns one on success
+ * and zero on failure. */
+OPENSSL_EXPORT int SSL_set_mtu(SSL *ssl, unsigned mtu);
+
+/* DTLSv1_get_timeout queries the next DTLS handshake timeout. If there is a
+ * timeout in progress, it sets |*out| to the time remaining and returns one.
+ * Otherwise, it returns zero.
+ *
+ * When the timeout expires, call |DTLSv1_handle_timeout| to handle the
+ * retransmit behavior.
+ *
+ * NOTE: This function must be queried again whenever the handshake state
+ * machine changes, including when |DTLSv1_handle_timeout| is called. */
+OPENSSL_EXPORT int DTLSv1_get_timeout(const SSL *ssl, struct timeval *out);
+
+/* DTLSv1_handle_timeout is called when a DTLS handshake timeout expires. If no
+ * timeout had expired, it returns 0. Otherwise, it retransmits the previous
+ * flight of handshake messages and returns 1. If too many timeouts had expired
+ * without progress or an error occurs, it returns -1.
+ *
+ * The caller's external timer should be compatible with the one |ssl| queries
+ * within some fudge factor. Otherwise, the call will be a no-op, but
+ * |DTLSv1_get_timeout| will return an updated timeout.
+ *
+ * If the function returns -1, checking if |SSL_get_error| returns
+ * |SSL_ERROR_WANT_WRITE| may be used to determine if the retransmit failed due
+ * to a non-fatal error at the write |BIO|. However, the operation may not be
+ * retried until the next timeout fires.
+ *
+ * WARNING: This function breaks the usual return value convention.
+ *
+ * TODO(davidben): This |SSL_ERROR_WANT_WRITE| behavior is kind of bizarre. */
+OPENSSL_EXPORT int DTLSv1_handle_timeout(SSL *ssl);
+
+
+/* Protocol versions. */
+
+#define DTLS1_VERSION_MAJOR 0xfe
+#define SSL3_VERSION_MAJOR 0x03
+
+#define SSL3_VERSION 0x0300
+#define TLS1_VERSION 0x0301
+#define TLS1_1_VERSION 0x0302
+#define TLS1_2_VERSION 0x0303
+
+#define DTLS1_VERSION 0xfeff
+#define DTLS1_2_VERSION 0xfefd
+
+/* SSL_CTX_set_min_version sets the minimum protocol version for |ctx| to
+ * |version|. */
+OPENSSL_EXPORT void SSL_CTX_set_min_version(SSL_CTX *ctx, uint16_t version);
+
+/* SSL_CTX_set_max_version sets the maximum protocol version for |ctx| to
+ * |version|. */
+OPENSSL_EXPORT void SSL_CTX_set_max_version(SSL_CTX *ctx, uint16_t version);
+
+/* SSL_set_min_version sets the minimum protocol version for |ssl| to
+ * |version|. */
+OPENSSL_EXPORT void SSL_set_min_version(SSL *ssl, uint16_t version);
+
+/* SSL_set_max_version sets the maximum protocol version for |ssl| to
+ * |version|. */
+OPENSSL_EXPORT void SSL_set_max_version(SSL *ssl, uint16_t version);
+
+/* SSL_version returns the TLS or DTLS protocol version used by |ssl|, which is
+ * one of the |*_VERSION| values. (E.g. |TLS1_2_VERSION|.) Before the version
+ * is negotiated, the result is undefined. */
+OPENSSL_EXPORT int SSL_version(const SSL *ssl);
+
+
+/* Options.
+ *
+ * Options configure protocol behavior. */
+
+/* SSL_OP_NO_QUERY_MTU, in DTLS, disables querying the MTU from the underlying
+ * |BIO|. Instead, the MTU is configured with |SSL_set_mtu|. */
+#define SSL_OP_NO_QUERY_MTU 0x00001000L
+
+/* SSL_OP_NO_TICKET disables session ticket support (RFC 5077). */
+#define SSL_OP_NO_TICKET 0x00004000L
+
+/* SSL_OP_CIPHER_SERVER_PREFERENCE configures servers to select ciphers and
+ * ECDHE curves according to the server's preferences instead of the
+ * client's. */
+#define SSL_OP_CIPHER_SERVER_PREFERENCE 0x00400000L
+
+/* SSL_OP_DISABLE_NPN configures an individual |SSL| to not advertise NPN,
+ * despite |SSL_CTX_set_next_proto_select_cb| being configured on the
+ * |SSL_CTX|. */
+#define SSL_OP_DISABLE_NPN 0x00800000L
+
+/* SSL_CTX_set_options enables all options set in |options| (which should be one
+ * or more of the |SSL_OP_*| values, ORed together) in |ctx|. It returns a
+ * bitmask representing the resulting enabled options. */
+OPENSSL_EXPORT uint32_t SSL_CTX_set_options(SSL_CTX *ctx, uint32_t options);
+
+/* SSL_CTX_clear_options disables all options set in |options| (which should be
+ * one or more of the |SSL_OP_*| values, ORed together) in |ctx|. It returns a
+ * bitmask representing the resulting enabled options. */
+OPENSSL_EXPORT uint32_t SSL_CTX_clear_options(SSL_CTX *ctx, uint32_t options);
+
+/* SSL_CTX_get_options returns a bitmask of |SSL_OP_*| values that represent all
+ * the options enabled for |ctx|. */
+OPENSSL_EXPORT uint32_t SSL_CTX_get_options(const SSL_CTX *ctx);
+
+/* SSL_set_options enables all options set in |options| (which should be one or
+ * more of the |SSL_OP_*| values, ORed together) in |ssl|. It returns a bitmask
+ * representing the resulting enabled options. */
+OPENSSL_EXPORT uint32_t SSL_set_options(SSL *ssl, uint32_t options);
+
+/* SSL_clear_options disables all options set in |options| (which should be one
+ * or more of the |SSL_OP_*| values, ORed together) in |ssl|. It returns a
+ * bitmask representing the resulting enabled options. */
+OPENSSL_EXPORT uint32_t SSL_clear_options(SSL *ssl, uint32_t options);
+
+/* SSL_get_options returns a bitmask of |SSL_OP_*| values that represent all the
+ * options enabled for |ssl|. */
+OPENSSL_EXPORT uint32_t SSL_get_options(const SSL *ssl);
+
+
+/* Modes.
+ *
+ * Modes configure API behavior. */
+
+/* SSL_MODE_ENABLE_PARTIAL_WRITE, in TLS, allows |SSL_write| to complete with a
+ * partial result when the only part of the input was written in a single
+ * record. In DTLS, it does nothing. */
+#define SSL_MODE_ENABLE_PARTIAL_WRITE 0x00000001L
+
+/* SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER, in TLS, allows retrying an incomplete
+ * |SSL_write| with a different buffer. However, |SSL_write| still assumes the
+ * buffer contents are unchanged. This is not the default to avoid the
+ * misconception that non-blocking |SSL_write| behaves like non-blocking
+ * |write|. In DTLS, it does nothing. */
+#define SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER 0x00000002L
+
+/* SSL_MODE_NO_AUTO_CHAIN disables automatically building a certificate chain
+ * before sending certificates to the peer.
+ * TODO(davidben): Remove this behavior. https://crbug.com/486295. */
+#define SSL_MODE_NO_AUTO_CHAIN 0x00000008L
+
+/* SSL_MODE_ENABLE_FALSE_START allows clients to send application data before
+ * receipt of ChangeCipherSpec and Finished. This mode enables full-handshakes
+ * to 'complete' in one RTT. See draft-bmoeller-tls-falsestart-01.
+ *
+ * When False Start is enabled, |SSL_do_handshake| may succeed before the
+ * handshake has completely finished. |SSL_write| will function at this point,
+ * and |SSL_read| will transparently wait for the final handshake leg before
+ * returning application data. To determine if False Start occurred or when the
+ * handshake is completely finished, see |SSL_in_false_start|, |SSL_in_init|,
+ * and |SSL_CB_HANDSHAKE_DONE| from |SSL_CTX_set_info_callback|. */
+#define SSL_MODE_ENABLE_FALSE_START 0x00000080L
+
+/* SSL_MODE_CBC_RECORD_SPLITTING causes multi-byte CBC records in SSL 3.0 and
+ * TLS 1.0 to be split in two: the first record will contain a single byte and
+ * the second will contain the remainder. This effectively randomises the IV and
+ * prevents BEAST attacks. */
+#define SSL_MODE_CBC_RECORD_SPLITTING 0x00000100L
+
+/* SSL_MODE_NO_SESSION_CREATION will cause any attempts to create a session to
+ * fail with SSL_R_SESSION_MAY_NOT_BE_CREATED. This can be used to enforce that
+ * session resumption is used for a given SSL*. */
+#define SSL_MODE_NO_SESSION_CREATION 0x00000200L
+
+/* SSL_MODE_SEND_FALLBACK_SCSV sends TLS_FALLBACK_SCSV in the ClientHello.
+ * To be set only by applications that reconnect with a downgraded protocol
+ * version; see RFC 7507 for details.
+ *
+ * DO NOT ENABLE THIS if your application attempts a normal handshake. Only use
+ * this in explicit fallback retries, following the guidance in RFC 7507. */
+#define SSL_MODE_SEND_FALLBACK_SCSV 0x00000400L
+
+/* SSL_CTX_set_mode enables all modes set in |mode| (which should be one or more
+ * of the |SSL_MODE_*| values, ORed together) in |ctx|. It returns a bitmask
+ * representing the resulting enabled modes. */
+OPENSSL_EXPORT uint32_t SSL_CTX_set_mode(SSL_CTX *ctx, uint32_t mode);
+
+/* SSL_CTX_clear_mode disables all modes set in |mode| (which should be one or
+ * more of the |SSL_MODE_*| values, ORed together) in |ctx|. It returns a
+ * bitmask representing the resulting enabled modes. */
+OPENSSL_EXPORT uint32_t SSL_CTX_clear_mode(SSL_CTX *ctx, uint32_t mode);
+
+/* SSL_CTX_get_mode returns a bitmask of |SSL_MODE_*| values that represent all
+ * the modes enabled for |ssl|. */
+OPENSSL_EXPORT uint32_t SSL_CTX_get_mode(const SSL_CTX *ctx);
+
+/* SSL_set_mode enables all modes set in |mode| (which should be one or more of
+ * the |SSL_MODE_*| values, ORed together) in |ssl|. It returns a bitmask
+ * representing the resulting enabled modes. */
+OPENSSL_EXPORT uint32_t SSL_set_mode(SSL *ssl, uint32_t mode);
+
+/* SSL_clear_mode disables all modes set in |mode| (which should be one or more
+ * of the |SSL_MODE_*| values, ORed together) in |ssl|. It returns a bitmask
+ * representing the resulting enabled modes. */
+OPENSSL_EXPORT uint32_t SSL_clear_mode(SSL *ssl, uint32_t mode);
+
+/* SSL_get_mode returns a bitmask of |SSL_MODE_*| values that represent all the
+ * modes enabled for |ssl|. */
+OPENSSL_EXPORT uint32_t SSL_get_mode(const SSL *ssl);
+
+
+/* Configuring certificates and private keys.
+ *
+ * These functions configure the connection's leaf certificate, private key, and
+ * certificate chain. The certificate chain is ordered leaf to root (as sent on
+ * the wire) but does not include the leaf. Both client and server certificates
+ * use these functions.
+ *
+ * Certificates and keys may be configured before the handshake or dynamically
+ * in the early callback and certificate callback. */
+
+/* SSL_CTX_use_certificate sets |ctx|'s leaf certificate to |x509|. It returns
+ * one on success and zero on failure. */
+OPENSSL_EXPORT int SSL_CTX_use_certificate(SSL_CTX *ctx, X509 *x509);
+
+/* SSL_use_certificate sets |ssl|'s leaf certificate to |x509|. It returns one
+ * on success and zero on failure. */
+OPENSSL_EXPORT int SSL_use_certificate(SSL *ssl, X509 *x509);
+
+/* SSL_CTX_use_PrivateKey sets |ctx|'s private key to |pkey|. It returns one on
+ * success and zero on failure. */
+OPENSSL_EXPORT int SSL_CTX_use_PrivateKey(SSL_CTX *ctx, EVP_PKEY *pkey);
+
+/* SSL_use_PrivateKey sets |ssl|'s private key to |pkey|. It returns one on
+ * success and zero on failure. */
+OPENSSL_EXPORT int SSL_use_PrivateKey(SSL *ssl, EVP_PKEY *pkey);
+
+/* SSL_CTX_set0_chain sets |ctx|'s certificate chain, excluding the leaf, to
+ * |chain|. On success, it returns one and takes ownership of |chain|.
+ * Otherwise, it returns zero. */
+OPENSSL_EXPORT int SSL_CTX_set0_chain(SSL_CTX *ctx, STACK_OF(X509) *chain);
+
+/* SSL_CTX_set1_chain sets |ctx|'s certificate chain, excluding the leaf, to
+ * |chain|. It returns one on success and zero on failure. The caller retains
+ * ownership of |chain| and may release it freely. */
+OPENSSL_EXPORT int SSL_CTX_set1_chain(SSL_CTX *ctx, STACK_OF(X509) *chain);
+
+/* SSL_set0_chain sets |ssl|'s certificate chain, excluding the leaf, to
+ * |chain|. On success, it returns one and takes ownership of |chain|.
+ * Otherwise, it returns zero. */
+OPENSSL_EXPORT int SSL_set0_chain(SSL *ssl, STACK_OF(X509) *chain);
+
+/* SSL_set1_chain sets |ssl|'s certificate chain, excluding the leaf, to
+ * |chain|. It returns one on success and zero on failure. The caller retains
+ * ownership of |chain| and may release it freely. */
+OPENSSL_EXPORT int SSL_set1_chain(SSL *ssl, STACK_OF(X509) *chain);
+
+/* SSL_CTX_add0_chain_cert appends |x509| to |ctx|'s certificate chain. On
+ * success, it returns one and takes ownership of |x509|. Otherwise, it returns
+ * zero. */
+OPENSSL_EXPORT int SSL_CTX_add0_chain_cert(SSL_CTX *ctx, X509 *x509);
+
+/* SSL_CTX_add1_chain_cert appends |x509| to |ctx|'s certificate chain. It
+ * returns one on success and zero on failure. The caller retains ownership of
+ * |x509| and may release it freely. */
+OPENSSL_EXPORT int SSL_CTX_add1_chain_cert(SSL_CTX *ctx, X509 *x509);
+
+/* SSL_add0_chain_cert appends |x509| to |ctx|'s certificate chain. On success,
+ * it returns one and takes ownership of |x509|. Otherwise, it returns zero. */
+OPENSSL_EXPORT int SSL_add0_chain_cert(SSL *ssl, X509 *x509);
+
+/* SSL_CTX_add_extra_chain_cert calls |SSL_CTX_add0_chain_cert|. */
+OPENSSL_EXPORT int SSL_CTX_add_extra_chain_cert(SSL_CTX *ctx, X509 *x509);
+
+/* SSL_add1_chain_cert appends |x509| to |ctx|'s certificate chain. It returns
+ * one on success and zero on failure. The caller retains ownership of |x509|
+ * and may release it freely. */
+OPENSSL_EXPORT int SSL_add1_chain_cert(SSL *ssl, X509 *x509);
+
+/* SSL_CTX_clear_chain_certs clears |ctx|'s certificate chain and returns
+ * one. */
+OPENSSL_EXPORT int SSL_CTX_clear_chain_certs(SSL_CTX *ctx);
+
+/* SSL_CTX_clear_extra_chain_certs calls |SSL_CTX_clear_chain_certs|. */
+OPENSSL_EXPORT int SSL_CTX_clear_extra_chain_certs(SSL_CTX *ctx);
+
+/* SSL_clear_chain_certs clears |ssl|'s certificate chain and returns one. */
+OPENSSL_EXPORT int SSL_clear_chain_certs(SSL *ssl);
+
+/* SSL_CTX_set_cert_cb sets a callback that is called to select a certificate.
+ * The callback returns one on success, zero on internal error, and a negative
+ * number on failure or to pause the handshake. If the handshake is paused,
+ * |SSL_get_error| will return |SSL_ERROR_WANT_X509_LOOKUP|.
+ *
+ * On the client, the callback may call |SSL_get0_certificate_types| and
+ * |SSL_get_client_CA_list| for information on the server's certificate
+ * request. */
+OPENSSL_EXPORT void SSL_CTX_set_cert_cb(SSL_CTX *ctx,
+                                        int (*cb)(SSL *ssl, void *arg),
+                                        void *arg);
+
+/* SSL_set_cert_cb sets a callback that is called to select a certificate. The
+ * callback returns one on success, zero on internal error, and a negative
+ * number on failure or to pause the handshake. If the handshake is paused,
+ * |SSL_get_error| will return |SSL_ERROR_WANT_X509_LOOKUP|.
+ *
+ * On the client, the callback may call |SSL_get0_certificate_types| and
+ * |SSL_get_client_CA_list| for information on the server's certificate
+ * request. */
+OPENSSL_EXPORT void SSL_set_cert_cb(SSL *ssl, int (*cb)(SSL *ssl, void *arg),
+                                    void *arg);
+
+/* SSL_get0_certificate_types, for a client, sets |*out_types| to an array
+ * containing the client certificate types requested by a server. It returns the
+ * length of the array.
+ *
+ * The behavior of this function is undefined except during the callbacks set by
+ * by |SSL_CTX_set_cert_cb| and |SSL_CTX_set_client_cert_cb| or when the
+ * handshake is paused because of them. */
+OPENSSL_EXPORT size_t SSL_get0_certificate_types(SSL *ssl,
+                                                 const uint8_t **out_types);
+
+/* SSL_certs_clear resets the private key, leaf certificate, and certificate
+ * chain of |ssl|. */
+OPENSSL_EXPORT void SSL_certs_clear(SSL *ssl);
+
+/* SSL_CTX_check_private_key returns one if the certificate and private key
+ * configured in |ctx| are consistent and zero otherwise. */
+OPENSSL_EXPORT int SSL_CTX_check_private_key(const SSL_CTX *ctx);
+
+/* SSL_check_private_key returns one if the certificate and private key
+ * configured in |ssl| are consistent and zero otherwise. */
+OPENSSL_EXPORT int SSL_check_private_key(const SSL *ssl);
+
+/* SSL_CTX_get0_certificate returns |ctx|'s leaf certificate. */
+OPENSSL_EXPORT X509 *SSL_CTX_get0_certificate(const SSL_CTX *ctx);
+
+/* SSL_get_certificate returns |ssl|'s leaf certificate. */
+OPENSSL_EXPORT X509 *SSL_get_certificate(const SSL *ssl);
+
+/* SSL_CTX_get0_privatekey returns |ctx|'s private key. */
+OPENSSL_EXPORT EVP_PKEY *SSL_CTX_get0_privatekey(const SSL_CTX *ctx);
+
+/* SSL_get_privatekey returns |ssl|'s private key. */
+OPENSSL_EXPORT EVP_PKEY *SSL_get_privatekey(const SSL *ssl);
+
+/* SSL_CTX_get0_chain_certs sets |*out_chain| to |ctx|'s certificate chain and
+ * returns one. */
+OPENSSL_EXPORT int SSL_CTX_get0_chain_certs(const SSL_CTX *ctx,
+                                            STACK_OF(X509) **out_chain);
+
+/* SSL_CTX_get_extra_chain_certs calls |SSL_CTX_get0_chain_certs|. */
+OPENSSL_EXPORT int SSL_CTX_get_extra_chain_certs(const SSL_CTX *ctx,
+                                                 STACK_OF(X509) **out_chain);
+
+/* SSL_get0_chain_certs sets |*out_chain| to |ssl|'s certificate chain and
+ * returns one. */
+OPENSSL_EXPORT int SSL_get0_chain_certs(const SSL *ssl,
+                                        STACK_OF(X509) **out_chain);
+
+/* SSL_CTX_set_signed_cert_timestamp_list sets the list of signed certificate
+ * timestamps that is sent to clients that request it. The |list| argument must
+ * contain one or more SCT structures serialised as a SignedCertificateTimestamp
+ * List (see https://tools.ietf.org/html/rfc6962#section-3.3) – i.e. each SCT
+ * is prefixed by a big-endian, uint16 length and the concatenation of one or
+ * more such prefixed SCTs are themselves also prefixed by a uint16 length. It
+ * returns one on success and zero on error. The caller retains ownership of
+ * |list|. */
+OPENSSL_EXPORT int SSL_CTX_set_signed_cert_timestamp_list(SSL_CTX *ctx,
+                                                          const uint8_t *list,
+                                                          size_t list_len);
+
+/* SSL_CTX_set_ocsp_response sets the OCSP reponse that is sent to clients
+ * which request it. It returns one on success and zero on error. The caller
+ * retains ownership of |response|. */
+OPENSSL_EXPORT int SSL_CTX_set_ocsp_response(SSL_CTX *ctx,
+                                             const uint8_t *response,
+                                             size_t response_len);
+
+/* SSL_set_private_key_digest_prefs copies |num_digests| NIDs from |digest_nids|
+ * into |ssl|. These digests will be used, in decreasing order of preference,
+ * when signing with |ssl|'s private key. It returns one on success and zero on
+ * error. */
+OPENSSL_EXPORT int SSL_set_private_key_digest_prefs(SSL *ssl,
+                                                    const int *digest_nids,
+                                                    size_t num_digests);
+
+
+/* Certificate and private key convenience functions. */
+
+/* SSL_CTX_use_RSAPrivateKey sets |ctx|'s private key to |rsa|. It returns one
+ * on success and zero on failure. */
+OPENSSL_EXPORT int SSL_CTX_use_RSAPrivateKey(SSL_CTX *ctx, RSA *rsa);
+
+/* SSL_use_RSAPrivateKey sets |ctx|'s private key to |rsa|. It returns one on
+ * success and zero on failure. */
+OPENSSL_EXPORT int SSL_use_RSAPrivateKey(SSL *ssl, RSA *rsa);
+
+/* The following functions configure certificates or private keys but take as
+ * input DER-encoded structures. They return one on success and zero on
+ * failure. */
+
+OPENSSL_EXPORT int SSL_CTX_use_certificate_ASN1(SSL_CTX *ctx, size_t der_len,
+                                                const uint8_t *der);
+OPENSSL_EXPORT int SSL_use_certificate_ASN1(SSL *ssl, const uint8_t *der,
+                                            size_t der_len);
+
+OPENSSL_EXPORT int SSL_CTX_use_PrivateKey_ASN1(int pk, SSL_CTX *ctx,
+                                               const uint8_t *der,
+                                               size_t der_len);
+OPENSSL_EXPORT int SSL_use_PrivateKey_ASN1(int type, SSL *ssl,
+                                           const uint8_t *der, size_t der_len);
+
+OPENSSL_EXPORT int SSL_CTX_use_RSAPrivateKey_ASN1(SSL_CTX *ctx,
+                                                  const uint8_t *der,
+                                                  size_t der_len);
+OPENSSL_EXPORT int SSL_use_RSAPrivateKey_ASN1(SSL *ssl, const uint8_t *der,
+                                              size_t der_len);
+
+/* The following functions configure certificates or private keys but take as
+ * input files to read from. They return one on success and zero on failure. The
+ * |type| parameter is one of the |SSL_FILETYPE_*| values and determines whether
+ * the file's contents are read as PEM or DER. */
+
+#define SSL_FILETYPE_ASN1 X509_FILETYPE_ASN1
+#define SSL_FILETYPE_PEM X509_FILETYPE_PEM
+
+OPENSSL_EXPORT int SSL_CTX_use_RSAPrivateKey_file(SSL_CTX *ctx,
+                                                  const char *file,
+                                                  int type);
+OPENSSL_EXPORT int SSL_use_RSAPrivateKey_file(SSL *ssl, const char *file,
+                                              int type);
+
+OPENSSL_EXPORT int SSL_CTX_use_certificate_file(SSL_CTX *ctx, const char *file,
+                                                int type);
+OPENSSL_EXPORT int SSL_use_certificate_file(SSL *ssl, const char *file,
+                                            int type);
+
+OPENSSL_EXPORT int SSL_CTX_use_PrivateKey_file(SSL_CTX *ctx, const char *file,
+                                               int type);
+OPENSSL_EXPORT int SSL_use_PrivateKey_file(SSL *ssl, const char *file,
+                                           int type);
+
+/* SSL_CTX_use_certificate_chain_file configures certificates for |ctx|. It
+ * reads the contents of |file| as a PEM-encoded leaf certificate followed
+ * optionally by the certificate chain to send to the peer. It returns one on
+ * success and zero on failure. */
+OPENSSL_EXPORT int SSL_CTX_use_certificate_chain_file(SSL_CTX *ctx,
+                                                      const char *file);
+
+/* SSL_CTX_set_default_passwd_cb sets the password callback for PEM-based
+ * convenience functions called on |ctx|. */
+OPENSSL_EXPORT void SSL_CTX_set_default_passwd_cb(SSL_CTX *ctx,
+                                                  pem_password_cb *cb);
+
+/* SSL_CTX_set_default_passwd_cb_userdata sets the userdata parameter for
+ * |ctx|'s password callback. */
+OPENSSL_EXPORT void SSL_CTX_set_default_passwd_cb_userdata(SSL_CTX *ctx,
+                                                           void *data);
+
+
+/* Custom private keys. */
+
+enum ssl_private_key_result_t {
+  ssl_private_key_success,
+  ssl_private_key_retry,
+  ssl_private_key_failure,
+};
+
+/* SSL_PRIVATE_KEY_METHOD describes private key hooks. This is used to off-load
+ * signing operations to a custom, potentially asynchronous, backend. */
+typedef struct ssl_private_key_method_st {
+  /* type returns either |EVP_PKEY_RSA| or |EVP_PKEY_EC| to denote the type of
+   * key used by |ssl|. */
+  int (*type)(SSL *ssl);
+
+  /* max_signature_len returns the maximum length of a signature signed by the
+   * key used by |ssl|. This must be a constant value for a given |ssl|. */
+  size_t (*max_signature_len)(SSL *ssl);
+
+  /* sign signs |in_len| bytes of digest from |in|. |md| is the hash function
+   * used to calculate |in|. On success, it returns |ssl_private_key_success|
+   * and writes at most |max_out| bytes of signature data to |out|. On failure,
+   * it returns |ssl_private_key_failure|. If the operation has not completed,
+   * it returns |ssl_private_key_retry|. |sign| should arrange for the
+   * high-level operation on |ssl| to be retried when the operation is
+   * completed. This will result in a call to |sign_complete|.
+   *
+   * If the key is an RSA key, implementations must use PKCS#1 padding. |in| is
+   * the digest itself, so the DigestInfo prefix, if any, must be prepended by
+   * |sign|. If |md| is |EVP_md5_sha1|, there is no prefix.
+   *
+   * It is an error to call |sign| while another private key operation is in
+   * progress on |ssl|. */
+  enum ssl_private_key_result_t (*sign)(SSL *ssl, uint8_t *out, size_t *out_len,
+                                        size_t max_out, const EVP_MD *md,
+                                        const uint8_t *in, size_t in_len);
+
+  /* sign_complete completes a pending |sign| operation. If the operation has
+   * completed, it returns |ssl_private_key_success| and writes the result to
+   * |out| as in |sign|. Otherwise, it returns |ssl_private_key_failure| on
+   * failure and |ssl_private_key_retry| if the operation is still in progress.
+   *
+   * |sign_complete| may be called arbitrarily many times before completion, but
+   * it is an error to call |sign_complete| if there is no pending |sign|
+   * operation in progress on |ssl|. */
+  enum ssl_private_key_result_t (*sign_complete)(SSL *ssl, uint8_t *out,
+                                                 size_t *out_len,
+                                                 size_t max_out);
+
+  /* decrypt decrypts |in_len| bytes of encrypted data from |in|. On success it
+   * returns |ssl_private_key_success|, writes at most |max_out| bytes of
+   * decrypted data to |out| and sets |*out_len| to the actual number of bytes
+   * written. On failure it returns |ssl_private_key_failure|. If the operation
+   * has not completed, it returns |ssl_private_key_retry|. The caller should
+   * arrange for the high-level operation on |ssl| to be retried when the
+   * operation is completed, which will result in a call to |decrypt_complete|.
+   * This function only works with RSA keys and should perform a raw RSA
+   * decryption operation with no padding.
+   *
+   * It is an error to call |decrypt| while another private key operation is in
+   * progress on |ssl|. */
+  enum ssl_private_key_result_t (*decrypt)(SSL *ssl, uint8_t *out,
+                                           size_t *out_len, size_t max_out,
+                                           const uint8_t *in, size_t in_len);
+
+  /* decrypt_complete completes a pending |decrypt| operation. If the operation
+   * has completed, it returns |ssl_private_key_success| and writes the result
+   * to |out| as in |decrypt|. Otherwise, it returns |ssl_private_key_failure|
+   * on failure and |ssl_private_key_retry| if the operation is still in
+   * progress.
+   *
+   * |decrypt_complete| may be called arbitrarily many times before completion,
+   * but it is an error to call |decrypt_complete| if there is no pending
+   * |decrypt| operation in progress on |ssl|. */
+  enum ssl_private_key_result_t (*decrypt_complete)(SSL *ssl, uint8_t *out,
+                                                    size_t *out_len,
+                                                    size_t max_out);
+} SSL_PRIVATE_KEY_METHOD;
+
+/* SSL_set_private_key_method configures a custom private key on |ssl|.
+ * |key_method| must remain valid for the lifetime of |ssl|. */
+OPENSSL_EXPORT void SSL_set_private_key_method(
+    SSL *ssl, const SSL_PRIVATE_KEY_METHOD *key_method);
+
+
+/* Cipher suites.
+ *
+ * |SSL_CIPHER| objects represent cipher suites. */
+
+DECLARE_STACK_OF(SSL_CIPHER)
+
+/* SSL_get_cipher_by_value returns the structure representing a TLS cipher
+ * suite based on its assigned number, or NULL if unknown. See
+ * https://www.iana.org/assignments/tls-parameters/tls-parameters.xhtml#tls-parameters-4. */
+OPENSSL_EXPORT const SSL_CIPHER *SSL_get_cipher_by_value(uint16_t value);
+
+/* SSL_CIPHER_get_id returns |cipher|'s id. It may be cast to a |uint16_t| to
+ * get the cipher suite value. */
+OPENSSL_EXPORT uint32_t SSL_CIPHER_get_id(const SSL_CIPHER *cipher);
+
+/* SSL_CIPHER_is_AES returns one if |cipher| uses AES (either GCM or CBC
+ * mode). */
+OPENSSL_EXPORT int SSL_CIPHER_is_AES(const SSL_CIPHER *cipher);
+
+/* SSL_CIPHER_has_MD5_HMAC returns one if |cipher| uses HMAC-MD5. */
+OPENSSL_EXPORT int SSL_CIPHER_has_MD5_HMAC(const SSL_CIPHER *cipher);
+
+/* SSL_CIPHER_has_SHA1_HMAC returns one if |cipher| uses HMAC-SHA1. */
+OPENSSL_EXPORT int SSL_CIPHER_has_SHA1_HMAC(const SSL_CIPHER *cipher);
+
+/* SSL_CIPHER_is_AESGCM returns one if |cipher| uses AES-GCM. */
+OPENSSL_EXPORT int SSL_CIPHER_is_AESGCM(const SSL_CIPHER *cipher);
+
+/* SSL_CIPHER_is_AES128GCM returns one if |cipher| uses 128-bit AES-GCM. */
+OPENSSL_EXPORT int SSL_CIPHER_is_AES128GCM(const SSL_CIPHER *cipher);
+
+/* SSL_CIPHER_is_AES128CBC returns one if |cipher| uses 128-bit AES in CBC
+ * mode. */
+OPENSSL_EXPORT int SSL_CIPHER_is_AES128CBC(const SSL_CIPHER *cipher);
+
+/* SSL_CIPHER_is_AES256CBC returns one if |cipher| uses 256-bit AES in CBC
+ * mode. */
+OPENSSL_EXPORT int SSL_CIPHER_is_AES256CBC(const SSL_CIPHER *cipher);
+
+/* SSL_CIPHER_is_CHACHA20POLY1305 returns one if |cipher| uses
+ * CHACHA20_POLY1305. Note this includes both the
+ * draft-ietf-tls-chacha20-poly1305-04 and draft-agl-tls-chacha20poly1305-04
+ * versions. */
+OPENSSL_EXPORT int SSL_CIPHER_is_CHACHA20POLY1305(const SSL_CIPHER *cipher);
+
+/* SSL_CIPHER_is_NULL returns one if |cipher| does not encrypt. */
+OPENSSL_EXPORT int SSL_CIPHER_is_NULL(const SSL_CIPHER *cipher);
+
+/* SSL_CIPHER_is_RC4 returns one if |cipher| uses RC4. */
+OPENSSL_EXPORT int SSL_CIPHER_is_RC4(const SSL_CIPHER *cipher);
+
+/* SSL_CIPHER_is_block_cipher returns one if |cipher| is a block cipher. */
+OPENSSL_EXPORT int SSL_CIPHER_is_block_cipher(const SSL_CIPHER *cipher);
+
+/* SSL_CIPHER_is_ECDSA returns one if |cipher| uses ECDSA. */
+OPENSSL_EXPORT int SSL_CIPHER_is_ECDSA(const SSL_CIPHER *cipher);
+
+/* SSL_CIPHER_get_min_version returns the minimum protocol version required
+ * for |cipher|. */
+OPENSSL_EXPORT uint16_t SSL_CIPHER_get_min_version(const SSL_CIPHER *cipher);
+
+/* SSL_CIPHER_get_name returns the OpenSSL name of |cipher|. */
+OPENSSL_EXPORT const char *SSL_CIPHER_get_name(const SSL_CIPHER *cipher);
+
+/* SSL_CIPHER_get_kx_name returns a string that describes the key-exchange
+ * method used by |cipher|. For example, "ECDHE_ECDSA". */
+OPENSSL_EXPORT const char *SSL_CIPHER_get_kx_name(const SSL_CIPHER *cipher);
+
+/* SSL_CIPHER_get_rfc_name returns a newly-allocated string with the standard
+ * name for |cipher| or NULL on error. For example,
+ * "TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256". The caller is responsible for
+ * calling |OPENSSL_free| on the result. */
+OPENSSL_EXPORT char *SSL_CIPHER_get_rfc_name(const SSL_CIPHER *cipher);
+
+/* SSL_CIPHER_get_bits returns the strength, in bits, of |cipher|. If
+ * |out_alg_bits| is not NULL, it writes the number of bits consumed by the
+ * symmetric algorithm to |*out_alg_bits|. */
+OPENSSL_EXPORT int SSL_CIPHER_get_bits(const SSL_CIPHER *cipher,
+                                       int *out_alg_bits);
+
+
+/* Cipher suite configuration.
+ *
+ * OpenSSL uses a mini-language to configure cipher suites. The language
+ * maintains an ordered list of enabled ciphers, along with an ordered list of
+ * disabled but available ciphers. Initially, all ciphers are disabled with a
+ * default ordering. The cipher string is then interpreted as a sequence of
+ * directives, separated by colons, each of which modifies this state.
+ *
+ * Most directives consist of a one character or empty opcode followed by a
+ * selector which matches a subset of available ciphers.
+ *
+ * Available opcodes are:
+ *
+ *   The empty opcode enables and appends all matching disabled ciphers to the
+ *   end of the enabled list. The newly appended ciphers are ordered relative to
+ *   each other matching their order in the disabled list.
+ *
+ *   |-| disables all matching enabled ciphers and prepends them to the disabled
+ *   list, with relative order from the enabled list preserved. This means the
+ *   most recently disabled ciphers get highest preference relative to other
+ *   disabled ciphers if re-enabled.
+ *
+ *   |+| moves all matching enabled ciphers to the end of the enabled list, with
+ *   relative order preserved.
+ *
+ *   |!| deletes all matching ciphers, enabled or not, from either list. Deleted
+ *   ciphers will not matched by future operations.
+ *
+ * A selector may be a specific cipher (using the OpenSSL name for the cipher)
+ * or one or more rules separated by |+|. The final selector matches the
+ * intersection of each rule. For instance, |AESGCM+aECDSA| matches
+ * ECDSA-authenticated AES-GCM ciphers.
+ *
+ * Available cipher rules are:
+ *
+ *   |ALL| matches all ciphers.
+ *
+ *   |kRSA|, |kDHE|, |kECDHE|, and |kPSK| match ciphers using plain RSA, DHE,
+ *   ECDHE, and plain PSK key exchanges, respectively. Note that ECDHE_PSK is
+ *   matched by |kECDHE| and not |kPSK|.
+ *
+ *   |aRSA|, |aECDSA|, and |aPSK| match ciphers authenticated by RSA, ECDSA, and
+ *   a pre-shared key, respectively.
+ *
+ *   |RSA|, |DHE|, |ECDHE|, |PSK|, |ECDSA|, and |PSK| are aliases for the
+ *   corresponding |k*| or |a*| cipher rule. |RSA| is an alias for |kRSA|, not
+ *   |aRSA|.
+ *
+ *   |3DES|, |RC4|, |AES128|, |AES256|, |AES|, |AESGCM|, |CHACHA20| match
+ *   ciphers whose bulk cipher use the corresponding encryption scheme. Note
+ *   that |AES|, |AES128|, and |AES256| match both CBC and GCM ciphers.
+ *
+ *   |MD5|, |SHA1|, |SHA256|, and |SHA384| match legacy cipher suites using the
+ *   corresponding hash function in their MAC. AEADs are matched by none of
+ *   these.
+ *
+ *   |SHA| is an alias for |SHA1|.
+ *
+ * Although implemented, authentication-only ciphers match no rules and must be
+ * explicitly selected by name.
+ *
+ * Deprecated cipher rules:
+ *
+ *   |kEDH|, |EDH|, |kEECDH|, and |EECDH| are legacy aliases for |kDHE|, |DHE|,
+ *   |kECDHE|, and |ECDHE|, respectively.
+ *
+ *   |MEDIUM| and |HIGH| match RC4-based ciphers and all others, respectively.
+ *
+ *   |FIPS| is an alias for |HIGH|.
+ *
+ *   |SSLv3| and |TLSv1| match ciphers available in TLS 1.1 or earlier.
+ *   |TLSv1_2| matches ciphers new in TLS 1.2. This is confusing and should not
+ *   be used.
+ *
+ * Unknown rules silently match nothing.
+ *
+ * The special |@STRENGTH| directive will sort all enabled ciphers by strength.
+ *
+ * The |DEFAULT| directive, when appearing at the front of the string, expands
+ * to the default ordering of available ciphers.
+ *
+ * If configuring a server, one may also configure equal-preference groups to
+ * partially respect the client's preferences when
+ * |SSL_OP_CIPHER_SERVER_PREFERENCE| is enabled. Ciphers in an equal-preference
+ * group have equal priority and use the client order. This may be used to
+ * enforce that AEADs are preferred but select AES-GCM vs. ChaCha20-Poly1305
+ * based on client preferences. An equal-preference is specified with square
+ * brackets, combining multiple selectors separated by |. For example:
+ *
+ *   [ECDHE-ECDSA-CHACHA20-POLY1305|ECDHE-ECDSA-AES128-GCM-SHA256]
+ *
+ * Once an equal-preference group is used, future directives must be
+ * opcode-less. */
+
+/* SSL_DEFAULT_CIPHER_LIST is the default cipher suite configuration. It is
+ * substituted when a cipher string starts with 'DEFAULT'. */
+#define SSL_DEFAULT_CIPHER_LIST "ALL"
+
+/* SSL_CTX_set_cipher_list configures the cipher list for |ctx|, evaluating
+ * |str| as a cipher string. It returns one on success and zero on failure. */
+OPENSSL_EXPORT int SSL_CTX_set_cipher_list(SSL_CTX *ctx, const char *str);
+
+/* SSL_CTX_set_cipher_list_tls10 configures the TLS 1.0+ cipher list for |ctx|,
+ * evaluating |str| as a cipher string. It returns one on success and zero on
+ * failure. If set, servers will use this cipher suite list for TLS 1.0 or
+ * higher. */
+OPENSSL_EXPORT int SSL_CTX_set_cipher_list_tls10(SSL_CTX *ctx, const char *str);
+
+/* SSL_CTX_set_cipher_list_tls11 configures the TLS 1.1+ cipher list for |ctx|,
+ * evaluating |str| as a cipher string. It returns one on success and zero on
+ * failure. If set, servers will use this cipher suite list for TLS 1.1 or
+ * higher. */
+OPENSSL_EXPORT int SSL_CTX_set_cipher_list_tls11(SSL_CTX *ctx, const char *str);
+
+/* SSL_set_cipher_list configures the cipher list for |ssl|, evaluating |str| as
+ * a cipher string. It returns one on success and zero on failure. */
+OPENSSL_EXPORT int SSL_set_cipher_list(SSL *ssl, const char *str);
+
+/* SSL_get_ciphers returns the cipher list for |ssl|, in order of preference. If
+ * |SSL_CTX_set_cipher_list_tls10| or |SSL_CTX_set_cipher_list_tls11| has been
+ * used, the corresponding list for the current version is returned. */
+OPENSSL_EXPORT STACK_OF(SSL_CIPHER) *SSL_get_ciphers(const SSL *ssl);
+
+
+/* Connection information. */
+
+/* SSL_is_init_finished returns one if |ssl| has completed its initial handshake
+ * and has no pending handshake. It returns zero otherwise. */
+OPENSSL_EXPORT int SSL_is_init_finished(const SSL *ssl);
+
+/* SSL_in_init returns one if |ssl| has a pending handshake and zero
+ * otherwise. */
+OPENSSL_EXPORT int SSL_in_init(const SSL *ssl);
+
+/* SSL_in_false_start returns one if |ssl| has a pending handshake that is in
+ * False Start. |SSL_write| may be called at this point without waiting for the
+ * peer, but |SSL_read| will complete the handshake before accepting application
+ * data.
+ *
+ * See also |SSL_MODE_ENABLE_FALSE_START|. */
+OPENSSL_EXPORT int SSL_in_false_start(const SSL *ssl);
+
+/* SSL_get_peer_certificate returns the peer's leaf certificate or NULL if the
+ * peer did not use certificates. The caller must call |X509_free| on the
+ * result to release it. */
+OPENSSL_EXPORT X509 *SSL_get_peer_certificate(const SSL *ssl);
+
+/* SSL_get_peer_cert_chain returns the peer's certificate chain or NULL if
+ * unavailable or the peer did not use certificates. This is the unverified
+ * list of certificates as sent by the peer, not the final chain built during
+ * verification. For historical reasons, this value may not be available if
+ * resuming a serialized |SSL_SESSION|. The caller does not take ownership of
+ * the result.
+ *
+ * WARNING: This function behaves differently between client and server. If
+ * |ssl| is a server, the returned chain does not include the leaf certificate.
+ * If a client, it does. */
+OPENSSL_EXPORT STACK_OF(X509) *SSL_get_peer_cert_chain(const SSL *ssl);
+
+/* SSL_get0_signed_cert_timestamp_list sets |*out| and |*out_len| to point to
+ * |*out_len| bytes of SCT information from the server. This is only valid if
+ * |ssl| is a client. The SCT information is a SignedCertificateTimestampList
+ * (including the two leading length bytes).
+ * See https://tools.ietf.org/html/rfc6962#section-3.3
+ * If no SCT was received then |*out_len| will be zero on return.
+ *
+ * WARNING: the returned data is not guaranteed to be well formed. */
+OPENSSL_EXPORT void SSL_get0_signed_cert_timestamp_list(const SSL *ssl,
+                                                        const uint8_t **out,
+                                                        size_t *out_len);
+
+/* SSL_get0_ocsp_response sets |*out| and |*out_len| to point to |*out_len|
+ * bytes of an OCSP response from the server. This is the DER encoding of an
+ * OCSPResponse type as defined in RFC 2560.
+ *
+ * WARNING: the returned data is not guaranteed to be well formed. */
+OPENSSL_EXPORT void SSL_get0_ocsp_response(const SSL *ssl, const uint8_t **out,
+                                           size_t *out_len);
+
+/* SSL_get_tls_unique writes at most |max_out| bytes of the tls-unique value
+ * for |ssl| to |out| and sets |*out_len| to the number of bytes written. It
+ * returns one on success or zero on error. In general |max_out| should be at
+ * least 12.
+ *
+ * This function will always fail if the initial handshake has not completed.
+ * The tls-unique value will change after a renegotiation but, since
+ * renegotiations can be initiated by the server at any point, the higher-level
+ * protocol must either leave them disabled or define states in which the
+ * tls-unique value can be read.
+ *
+ * The tls-unique value is defined by
+ * https://tools.ietf.org/html/rfc5929#section-3.1. Due to a weakness in the
+ * TLS protocol, tls-unique is broken for resumed connections unless the
+ * Extended Master Secret extension is negotiated. Thus this function will
+ * return zero if |ssl| performed session resumption unless EMS was used when
+ * negotiating the original session. */
+OPENSSL_EXPORT int SSL_get_tls_unique(const SSL *ssl, uint8_t *out,
+                                      size_t *out_len, size_t max_out);
+
+/* SSL_get_extms_support returns one if the Extended Master Secret
+ * extension was negotiated. Otherwise, it returns zero. */
+OPENSSL_EXPORT int SSL_get_extms_support(const SSL *ssl);
+
+/* SSL_get_current_cipher returns the cipher used in the current outgoing
+ * connection state, or NULL if the null cipher is active. */
+OPENSSL_EXPORT const SSL_CIPHER *SSL_get_current_cipher(const SSL *ssl);
+
+/* SSL_session_reused returns one if |ssl| performed an abbreviated handshake
+ * and zero otherwise.
+ *
+ * TODO(davidben): Hammer down the semantics of this API while a handshake,
+ * initial or renego, is in progress. */
+OPENSSL_EXPORT int SSL_session_reused(const SSL *ssl);
+
+/* SSL_get_secure_renegotiation_support returns one if the peer supports secure
+ * renegotiation (RFC 5746) and zero otherwise. */
+OPENSSL_EXPORT int SSL_get_secure_renegotiation_support(const SSL *ssl);
+
+/* SSL_export_keying_material exports a value derived from the master secret, as
+ * specified in RFC 5705. It writes |out_len| bytes to |out| given a label and
+ * optional context. (Since a zero length context is allowed, the |use_context|
+ * flag controls whether a context is included.)
+ *
+ * It returns one on success and zero otherwise. */
+OPENSSL_EXPORT int SSL_export_keying_material(
+    SSL *ssl, uint8_t *out, size_t out_len, const char *label, size_t label_len,
+    const uint8_t *context, size_t context_len, int use_context);
+
+
+/* Custom extensions.
+ *
+ * The custom extension functions allow TLS extensions to be added to
+ * ClientHello and ServerHello messages. */
+
+/* SSL_custom_ext_add_cb is a callback function that is called when the
+ * ClientHello (for clients) or ServerHello (for servers) is constructed. In
+ * the case of a server, this callback will only be called for a given
+ * extension if the ClientHello contained that extension – it's not possible to
+ * inject extensions into a ServerHello that the client didn't request.
+ *
+ * When called, |extension_value| will contain the extension number that is
+ * being considered for addition (so that a single callback can handle multiple
+ * extensions). If the callback wishes to include the extension, it must set
+ * |*out| to point to |*out_len| bytes of extension contents and return one. In
+ * this case, the corresponding |SSL_custom_ext_free_cb| callback will later be
+ * called with the value of |*out| once that data has been copied.
+ *
+ * If the callback does not wish to add an extension it must return zero.
+ *
+ * Alternatively, the callback can abort the connection by setting
+ * |*out_alert_value| to a TLS alert number and returning -1. */
+typedef int (*SSL_custom_ext_add_cb)(SSL *ssl, unsigned extension_value,
+                                     const uint8_t **out, size_t *out_len,
+                                     int *out_alert_value, void *add_arg);
+
+/* SSL_custom_ext_free_cb is a callback function that is called by OpenSSL iff
+ * an |SSL_custom_ext_add_cb| callback previously returned one. In that case,
+ * this callback is called and passed the |out| pointer that was returned by
+ * the add callback. This is to free any dynamically allocated data created by
+ * the add callback. */
+typedef void (*SSL_custom_ext_free_cb)(SSL *ssl, unsigned extension_value,
+                                       const uint8_t *out, void *add_arg);
+
+/* SSL_custom_ext_parse_cb is a callback function that is called by OpenSSL to
+ * parse an extension from the peer: that is from the ServerHello for a client
+ * and from the ClientHello for a server.
+ *
+ * When called, |extension_value| will contain the extension number and the
+ * contents of the extension are |contents_len| bytes at |contents|.
+ *
+ * The callback must return one to continue the handshake. Otherwise, if it
+ * returns zero, a fatal alert with value |*out_alert_value| is sent and the
+ * handshake is aborted. */
+typedef int (*SSL_custom_ext_parse_cb)(SSL *ssl, unsigned extension_value,
+                                       const uint8_t *contents,
+                                       size_t contents_len,
+                                       int *out_alert_value, void *parse_arg);
+
+/* SSL_extension_supported returns one iff OpenSSL internally handles
+ * extensions of type |extension_value|. This can be used to avoid registering
+ * custom extension handlers for extensions that a future version of OpenSSL
+ * may handle internally. */
+OPENSSL_EXPORT int SSL_extension_supported(unsigned extension_value);
+
+/* SSL_CTX_add_client_custom_ext registers callback functions for handling
+ * custom TLS extensions for client connections.
+ *
+ * If |add_cb| is NULL then an empty extension will be added in each
+ * ClientHello. Otherwise, see the comment for |SSL_custom_ext_add_cb| about
+ * this callback.
+ *
+ * The |free_cb| may be NULL if |add_cb| doesn't dynamically allocate data that
+ * needs to be freed.
+ *
+ * It returns one on success or zero on error. It's always an error to register
+ * callbacks for the same extension twice, or to register callbacks for an
+ * extension that OpenSSL handles internally. See |SSL_extension_supported| to
+ * discover, at runtime, which extensions OpenSSL handles internally. */
+OPENSSL_EXPORT int SSL_CTX_add_client_custom_ext(
+    SSL_CTX *ctx, unsigned extension_value, SSL_custom_ext_add_cb add_cb,
+    SSL_custom_ext_free_cb free_cb, void *add_arg,
+    SSL_custom_ext_parse_cb parse_cb, void *parse_arg);
+
+/* SSL_CTX_add_server_custom_ext is the same as
+ * |SSL_CTX_add_client_custom_ext|, but for server connections.
+ *
+ * Unlike on the client side, if |add_cb| is NULL no extension will be added.
+ * The |add_cb|, if any, will only be called if the ClientHello contained a
+ * matching extension. */
+OPENSSL_EXPORT int SSL_CTX_add_server_custom_ext(
+    SSL_CTX *ctx, unsigned extension_value, SSL_custom_ext_add_cb add_cb,
+    SSL_custom_ext_free_cb free_cb, void *add_arg,
+    SSL_custom_ext_parse_cb parse_cb, void *parse_arg);
+
+
+/* Sessions.
+ *
+ * An |SSL_SESSION| represents an SSL session that may be resumed in an
+ * abbreviated handshake. It is reference-counted and immutable. Once
+ * established, an |SSL_SESSION| may be shared by multiple |SSL| objects on
+ * different threads and must not be modified. */
+
+DECLARE_LHASH_OF(SSL_SESSION)
+DECLARE_PEM_rw(SSL_SESSION, SSL_SESSION)
+
+/* SSL_SESSION_new returns a newly-allocated blank |SSL_SESSION| or NULL on
+ * error. This may be useful in writing tests but otherwise should not be
+ * used outside the library. */
+OPENSSL_EXPORT SSL_SESSION *SSL_SESSION_new(void);
+
+/* SSL_SESSION_up_ref, if |session| is not NULL, increments the reference count
+ * of |session|. It then returns |session|. */
+OPENSSL_EXPORT SSL_SESSION *SSL_SESSION_up_ref(SSL_SESSION *session);
+
+/* SSL_SESSION_free decrements the reference count of |session|. If it reaches
+ * zero, all data referenced by |session| and |session| itself are released. */
+OPENSSL_EXPORT void SSL_SESSION_free(SSL_SESSION *session);
+
+/* SSL_SESSION_to_bytes serializes |in| into a newly allocated buffer and sets
+ * |*out_data| to that buffer and |*out_len| to its length. The caller takes
+ * ownership of the buffer and must call |OPENSSL_free| when done. It returns
+ * one on success and zero on error. */
+OPENSSL_EXPORT int SSL_SESSION_to_bytes(const SSL_SESSION *in,
+                                        uint8_t **out_data, size_t *out_len);
+
+/* SSL_SESSION_to_bytes_for_ticket serializes |in|, but excludes the session
+ * identification information, namely the session ID and ticket. */
+OPENSSL_EXPORT int SSL_SESSION_to_bytes_for_ticket(const SSL_SESSION *in,
+                                                   uint8_t **out_data,
+                                                   size_t *out_len);
+
+/* SSL_SESSION_from_bytes parses |in_len| bytes from |in| as an SSL_SESSION. It
+ * returns a newly-allocated |SSL_SESSION| on success or NULL on error. */
+OPENSSL_EXPORT SSL_SESSION *SSL_SESSION_from_bytes(const uint8_t *in,
+                                                   size_t in_len);
+
+/* SSL_SESSION_get_version returns a string describing the TLS version |session|
+ * was established at. For example, "TLSv1.2" or "SSLv3". */
+OPENSSL_EXPORT const char *SSL_SESSION_get_version(const SSL_SESSION *session);
+
+/* SSL_SESSION_get_id returns a pointer to a buffer containg |session|'s session
+ * ID and sets |*out_len| to its length. */
+OPENSSL_EXPORT const uint8_t *SSL_SESSION_get_id(const SSL_SESSION *session,
+                                                 unsigned *out_len);
+
+/* SSL_SESSION_get_time returns the time at which |session| was established in
+ * seconds since the UNIX epoch. */
+OPENSSL_EXPORT long SSL_SESSION_get_time(const SSL_SESSION *session);
+
+/* SSL_SESSION_get_timeout returns the lifetime of |session| in seconds. */
+OPENSSL_EXPORT long SSL_SESSION_get_timeout(const SSL_SESSION *session);
+
+/* SSL_SESSION_get_key_exchange_info returns a value that describes the
+ * strength of the asymmetric operation that provides confidentiality to
+ * |session|. Its interpretation depends on the operation used. See the
+ * documentation for this value in the |SSL_SESSION| structure. */
+OPENSSL_EXPORT uint32_t SSL_SESSION_get_key_exchange_info(
+    const SSL_SESSION *session);
+
+/* SSL_SESSION_get0_peer return's the peer leaf certificate stored in
+ * |session|.
+ *
+ * TODO(davidben): This should return a const X509 *. */
+OPENSSL_EXPORT X509 *SSL_SESSION_get0_peer(const SSL_SESSION *session);
+
+/* SSL_SESSION_set_time sets |session|'s creation time to |time| and returns
+ * |time|. This function may be useful in writing tests but otherwise should not
+ * be used. */
+OPENSSL_EXPORT long SSL_SESSION_set_time(SSL_SESSION *session, long time);
+
+/* SSL_SESSION_set_timeout sets |session|'s timeout to |timeout| and returns
+ * one. This function may be useful in writing tests but otherwise should not
+ * be used. */
+OPENSSL_EXPORT long SSL_SESSION_set_timeout(SSL_SESSION *session, long timeout);
+
+/* SSL_SESSION_set1_id_context sets |session|'s session ID context (see
+ * |SSL_CTX_set_session_id_context|) to |sid_ctx|. It returns one on success and
+ * zero on error. This function may be useful in writing tests but otherwise
+ * should not be used. */
+OPENSSL_EXPORT int SSL_SESSION_set1_id_context(SSL_SESSION *session,
+                                               const uint8_t *sid_ctx,
+                                               unsigned sid_ctx_len);
+
+
+/* Session caching.
+ *
+ * Session caching allows clients to reconnect to a server based on saved
+ * parameters from a previous connection.
+ *
+ * For a server, the library implements a built-in internal session cache as an
+ * in-memory hash table. One may also register callbacks to implement a custom
+ * external session cache. An external cache may be used in addition to or
+ * instead of the internal one. Use |SSL_CTX_set_session_cache_mode| to toggle
+ * the internal cache.
+ *
+ * For a client, the only option is an external session cache. Prior to
+ * handshaking, the consumer should look up a session externally (keyed, for
+ * instance, by hostname) and use |SSL_set_session| to configure which session
+ * to offer. The callbacks may be used to determine when new sessions are
+ * available.
+ *
+ * Note that offering or accepting a session short-circuits most parameter
+ * negotiation. Resuming sessions across different configurations may result in
+ * surprising behavor. So, for instance, a client implementing a version
+ * fallback should shard its session cache by maximum protocol version. */
+
+/* SSL_SESS_CACHE_OFF disables all session caching. */
+#define SSL_SESS_CACHE_OFF 0x0000
+
+/* SSL_SESS_CACHE_CLIENT enables session caching for a client. The internal
+ * cache is never used on a client, so this only enables the callbacks. */
+#define SSL_SESS_CACHE_CLIENT 0x0001
+
+/* SSL_SESS_CACHE_SERVER enables session caching for a server. */
+#define SSL_SESS_CACHE_SERVER 0x0002
+
+/* SSL_SESS_CACHE_SERVER enables session caching for both client and server. */
+#define SSL_SESS_CACHE_BOTH (SSL_SESS_CACHE_CLIENT | SSL_SESS_CACHE_SERVER)
+
+/* SSL_SESS_CACHE_NO_AUTO_CLEAR disables automatically calling
+ * |SSL_CTX_flush_sessions| every 255 connections. */
+#define SSL_SESS_CACHE_NO_AUTO_CLEAR 0x0080
+
+/* SSL_SESS_CACHE_NO_INTERNAL_LOOKUP, on a server, disables looking up a session
+ * from the internal session cache. */
+#define SSL_SESS_CACHE_NO_INTERNAL_LOOKUP 0x0100
+
+/* SSL_SESS_CACHE_NO_INTERNAL_STORE, on a server, disables storing sessions in
+ * the internal session cache. */
+#define SSL_SESS_CACHE_NO_INTERNAL_STORE 0x0200
+
+/* SSL_SESS_CACHE_NO_INTERNAL, on a server, disables the internal session
+ * cache. */
+#define SSL_SESS_CACHE_NO_INTERNAL \
+    (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP | SSL_SESS_CACHE_NO_INTERNAL_STORE)
+
+/* SSL_CTX_set_session_cache_mode sets the session cache mode bits for |ctx| to
+ * |mode|. It returns the previous value. */
+OPENSSL_EXPORT int SSL_CTX_set_session_cache_mode(SSL_CTX *ctx, int mode);
+
+/* SSL_CTX_get_session_cache_mode returns the session cache mode bits for
+ * |ctx| */
+OPENSSL_EXPORT int SSL_CTX_get_session_cache_mode(const SSL_CTX *ctx);
+
+/* SSL_set_session, for a client, configures |ssl| to offer to resume |session|
+ * in the initial handshake and returns one. The caller retains ownership of
+ * |session|. */
+OPENSSL_EXPORT int SSL_set_session(SSL *ssl, SSL_SESSION *session);
+
+/* SSL_get_session returns a non-owning pointer to |ssl|'s session. Prior to the
+ * initial handshake beginning, this is the session to be offered, set by
+ * |SSL_set_session|. After a handshake has finished, this is the currently
+ * active session. Its behavior is undefined while a handshake is progress. */
+OPENSSL_EXPORT SSL_SESSION *SSL_get_session(const SSL *ssl);
+
+/* SSL_get0_session is an alias for |SSL_get_session|. */
+#define SSL_get0_session SSL_get_session
+
+/* SSL_get1_session acts like |SSL_get_session| but returns a new reference to
+ * the session. */
+OPENSSL_EXPORT SSL_SESSION *SSL_get1_session(SSL *ssl);
+
+/* SSL_DEFAULT_SESSION_TIMEOUT is the default lifetime, in seconds, of a
+ * session. */
+#define SSL_DEFAULT_SESSION_TIMEOUT (2 * 60 * 60)
+
+/* SSL_CTX_set_timeout sets the lifetime, in seconds, of sessions created in
+ * |ctx| to |timeout|. */
+OPENSSL_EXPORT long SSL_CTX_set_timeout(SSL_CTX *ctx, long timeout);
+
+/* SSL_CTX_get_timeout returns the lifetime, in seconds, of sessions created in
+ * |ctx|. */
+OPENSSL_EXPORT long SSL_CTX_get_timeout(const SSL_CTX *ctx);
+
+/* SSL_CTX_set_session_id_context sets |ctx|'s session ID context to |sid_ctx|.
+ * It returns one on success and zero on error. The session ID context is an
+ * application-defined opaque byte string. A session will not be used in a
+ * connection without a matching session ID context.
+ *
+ * For a server, if |SSL_VERIFY_PEER| is enabled, it is an error to not set a
+ * session ID context.
+ *
+ * TODO(davidben): Is that check needed? That seems a special case of taking
+ * care not to cross-resume across configuration changes, and this is only
+ * relevant if a server requires client auth. */
+OPENSSL_EXPORT int SSL_CTX_set_session_id_context(SSL_CTX *ctx,
+                                                  const uint8_t *sid_ctx,
+                                                  unsigned sid_ctx_len);
+
+/* SSL_set_session_id_context sets |ssl|'s session ID context to |sid_ctx|. It
+ * returns one on success and zero on error. See also
+ * |SSL_CTX_set_session_id_context|. */
+OPENSSL_EXPORT int SSL_set_session_id_context(SSL *ssl, const uint8_t *sid_ctx,
+                                              unsigned sid_ctx_len);
+
+/* SSL_SESSION_CACHE_MAX_SIZE_DEFAULT is the default maximum size of a session
+ * cache. */
+#define SSL_SESSION_CACHE_MAX_SIZE_DEFAULT (1024 * 20)
+
+/* SSL_CTX_sess_set_cache_size sets the maximum size of |ctx|'s internal session
+ * cache to |size|. It returns the previous value. */
+OPENSSL_EXPORT unsigned long SSL_CTX_sess_set_cache_size(SSL_CTX *ctx,
+                                                         unsigned long size);
+
+/* SSL_CTX_sess_get_cache_size returns the maximum size of |ctx|'s internal
+ * session cache. */
+OPENSSL_EXPORT unsigned long SSL_CTX_sess_get_cache_size(const SSL_CTX *ctx);
+
+/* SSL_CTX_sessions returns |ctx|'s internal session cache. */
+OPENSSL_EXPORT LHASH_OF(SSL_SESSION) *SSL_CTX_sessions(SSL_CTX *ctx);
+
+/* SSL_CTX_sess_number returns the number of sessions in |ctx|'s internal
+ * session cache. */
+OPENSSL_EXPORT size_t SSL_CTX_sess_number(const SSL_CTX *ctx);
+
+/* SSL_CTX_add_session inserts |session| into |ctx|'s internal session cache. It
+ * returns one on success and zero on error or if |session| is already in the
+ * cache. The caller retains its reference to |session|. */
+OPENSSL_EXPORT int SSL_CTX_add_session(SSL_CTX *ctx, SSL_SESSION *session);
+
+/* SSL_CTX_remove_session removes |session| from |ctx|'s internal session cache.
+ * It returns one on success and zero if |session| was not in the cache. */
+OPENSSL_EXPORT int SSL_CTX_remove_session(SSL_CTX *ctx, SSL_SESSION *session);
+
+/* SSL_CTX_flush_sessions removes all sessions from |ctx| which have expired as
+ * of time |time|. If |time| is zero, all sessions are removed. */
+OPENSSL_EXPORT void SSL_CTX_flush_sessions(SSL_CTX *ctx, long time);
+
+/* SSL_CTX_sess_set_new_cb sets the callback to be called when a new session is
+ * established and ready to be cached. If the session cache is disabled (the
+ * appropriate one of |SSL_SESS_CACHE_CLIENT| or |SSL_SESS_CACHE_SERVER| is
+ * unset), the callback is not called.
+ *
+ * The callback is passed a reference to |session|. It returns one if it takes
+ * ownership and zero otherwise.
+ *
+ * Note: For a client, the callback may be called on abbreviated handshakes if a
+ * ticket is renewed. Further, it may not be called until some time after
+ * |SSL_do_handshake| or |SSL_connect| completes if False Start is enabled. Thus
+ * it's recommended to use this callback over checking |SSL_session_reused| on
+ * handshake completion.
+ *
+ * TODO(davidben): Conditioning callbacks on |SSL_SESS_CACHE_CLIENT| or
+ * |SSL_SESS_CACHE_SERVER| doesn't make any sense when one could just as easily
+ * not supply the callbacks. Removing that condition and the client internal
+ * cache would simplify things. */
+OPENSSL_EXPORT void SSL_CTX_sess_set_new_cb(
+    SSL_CTX *ctx, int (*new_session_cb)(SSL *ssl, SSL_SESSION *session));
+
+/* SSL_CTX_sess_get_new_cb returns the callback set by
+ * |SSL_CTX_sess_set_new_cb|. */
+OPENSSL_EXPORT int (*SSL_CTX_sess_get_new_cb(SSL_CTX *ctx))(
+    SSL *ssl, SSL_SESSION *session);
+
+/* SSL_CTX_sess_set_remove_cb sets a callback which is called when a session is
+ * removed from the internal session cache.
+ *
+ * TODO(davidben): What is the point of this callback? It seems useless since it
+ * only fires on sessions in the internal cache. */
+OPENSSL_EXPORT void SSL_CTX_sess_set_remove_cb(
+    SSL_CTX *ctx,
+    void (*remove_session_cb)(SSL_CTX *ctx, SSL_SESSION *session));
+
+/* SSL_CTX_sess_get_remove_cb returns the callback set by
+ * |SSL_CTX_sess_set_remove_cb|. */
+OPENSSL_EXPORT void (*SSL_CTX_sess_get_remove_cb(SSL_CTX *ctx))(
+    SSL_CTX *ctx, SSL_SESSION *session);
+
+/* SSL_CTX_sess_set_get_cb sets a callback to look up a session by ID for a
+ * server. The callback is passed the session ID and should return a matching
+ * |SSL_SESSION| or NULL if not found. It should set |*out_copy| to zero and
+ * return a new reference to the session. This callback is not used for a
+ * client.
+ *
+ * For historical reasons, if |*out_copy| is set to one (default), the SSL
+ * library will take a new reference to the returned |SSL_SESSION|, expecting
+ * the callback to return a non-owning pointer. This is not recommended. If
+ * |ctx| and thus the callback is used on multiple threads, the session may be
+ * removed and invalidated before the SSL library calls |SSL_SESSION_up_ref|,
+ * whereas the callback may synchronize internally.
+ *
+ * To look up a session asynchronously, the callback may return
+ * |SSL_magic_pending_session_ptr|. See the documentation for that function and
+ * |SSL_ERROR_PENDING_SESSION|.
+ *
+ * If the internal session cache is enabled, the callback is only consulted if
+ * the internal cache does not return a match.
+ *
+ * The callback's |id| parameter is not const for historical reasons, but the
+ * contents may not be modified. */
+OPENSSL_EXPORT void SSL_CTX_sess_set_get_cb(
+    SSL_CTX *ctx,
+    SSL_SESSION *(*get_session_cb)(SSL *ssl, uint8_t *id, int id_len,
+                                   int *out_copy));
+
+/* SSL_CTX_sess_get_get_cb returns the callback set by
+ * |SSL_CTX_sess_set_get_cb|. */
+OPENSSL_EXPORT SSL_SESSION *(*SSL_CTX_sess_get_get_cb(SSL_CTX *ctx))(
+    SSL *ssl, uint8_t *id, int id_len, int *out_copy);
+
+/* SSL_magic_pending_session_ptr returns a magic |SSL_SESSION|* which indicates
+ * that the session isn't currently unavailable. |SSL_get_error| will then
+ * return |SSL_ERROR_PENDING_SESSION| and the handshake can be retried later
+ * when the lookup has completed. */
+OPENSSL_EXPORT SSL_SESSION *SSL_magic_pending_session_ptr(void);
+
+
+/* Session tickets.
+ *
+ * Session tickets, from RFC 5077, allow session resumption without server-side
+ * state. Session tickets are supported in by default but may be disabled with
+ * |SSL_OP_NO_TICKET|.
+ *
+ * On the client, ticket-based sessions use the same APIs as ID-based tickets.
+ * Callers do not need to handle them differently.
+ *
+ * On the server, tickets are encrypted and authenticated with a secret key. By
+ * default, an |SSL_CTX| generates a key on creation. Tickets are minted and
+ * processed transparently. The following functions may be used to configure a
+ * persistent key or implement more custom behavior. */
+
+/* SSL_CTX_get_tlsext_ticket_keys writes |ctx|'s session ticket key material to
+ * |len| bytes of |out|. It returns one on success and zero if |len| is not
+ * 48. If |out| is NULL, it returns 48 instead. */
+OPENSSL_EXPORT int SSL_CTX_get_tlsext_ticket_keys(SSL_CTX *ctx, void *out,
+                                                  size_t len);
+
+/* SSL_CTX_set_tlsext_ticket_keys sets |ctx|'s session ticket key material to
+ * |len| bytes of |in|. It returns one on success and zero if |len| is not
+ * 48. If |in| is NULL, it returns 48 instead. */
+OPENSSL_EXPORT int SSL_CTX_set_tlsext_ticket_keys(SSL_CTX *ctx, const void *in,
+                                                  size_t len);
+
+/* SSL_TICKET_KEY_NAME_LEN is the length of the key name prefix of a session
+ * ticket. */
+#define SSL_TICKET_KEY_NAME_LEN 16
+
+/* SSL_CTX_set_tlsext_ticket_key_cb sets the ticket callback to |callback| and
+ * returns one. |callback| will be called when encrypting a new ticket and when
+ * decrypting a ticket from the client.
+ *
+ * In both modes, |ctx| and |hmac_ctx| will already have been initialized with
+ * |EVP_CIPHER_CTX_init| and |HMAC_CTX_init|, respectively. |callback|
+ * configures |hmac_ctx| with an HMAC digest and key, and configures |ctx|
+ * for encryption or decryption, based on the mode.
+ *
+ * When encrypting a new ticket, |encrypt| will be one. It writes a public
+ * 16-byte key name to |key_name| and a fresh IV to |iv|. The output IV length
+ * must match |EVP_CIPHER_CTX_iv_length| of the cipher selected. In this mode,
+ * |callback| returns 1 on success and -1 on error.
+ *
+ * When decrypting a ticket, |encrypt| will be zero. |key_name| will point to a
+ * 16-byte key name and |iv| points to an IV. The length of the IV consumed must
+ * match |EVP_CIPHER_CTX_iv_length| of the cipher selected. In this mode,
+ * |callback| returns -1 to abort the handshake, 0 if decrypting the ticket
+ * failed, and 1 or 2 on success. If it returns 2, the ticket will be renewed.
+ * This may be used to re-key the ticket.
+ *
+ * WARNING: |callback| wildly breaks the usual return value convention and is
+ * called in two different modes. */
+OPENSSL_EXPORT int SSL_CTX_set_tlsext_ticket_key_cb(
+    SSL_CTX *ctx, int (*callback)(SSL *ssl, uint8_t *key_name, uint8_t *iv,
+                                  EVP_CIPHER_CTX *ctx, HMAC_CTX *hmac_ctx,
+                                  int encrypt));
+
+
+/* Elliptic curve Diffie-Hellman.
+ *
+ * Cipher suites using an ECDHE key exchange perform Diffie-Hellman over an
+ * elliptic curve negotiated by both endpoints. See RFC 4492. Only named curves
+ * are supported. ECDHE is always enabled, but the curve preferences may be
+ * configured with these functions.
+ *
+ * A client may use |SSL_SESSION_get_key_exchange_info| to determine the curve
+ * selected. */
+
+/* SSL_CTX_set1_curves sets the preferred curves for |ctx| to be |curves|. Each
+ * element of |curves| should be a curve nid. It returns one on success and
+ * zero on failure. */
+OPENSSL_EXPORT int SSL_CTX_set1_curves(SSL_CTX *ctx, const int *curves,
+                                       size_t curves_len);
+
+/* SSL_set1_curves sets the preferred curves for |ssl| to be |curves|. Each
+ * element of |curves| should be a curve nid. It returns one on success and
+ * zero on failure. */
+OPENSSL_EXPORT int SSL_set1_curves(SSL *ssl, const int *curves,
+                                   size_t curves_len);
+
+/* SSL_get_curve_name returns a human-readable name for the elliptic curve
+ * specified by the given TLS curve id, or NULL if the curve if unknown. */
+OPENSSL_EXPORT const char *SSL_get_curve_name(uint16_t curve_id);
+
+
+/* Multiplicative Diffie-Hellman.
+ *
+ * Cipher suites using a DHE key exchange perform Diffie-Hellman over a
+ * multiplicative group selected by the server. These ciphers are disabled for a
+ * server unless a group is chosen with one of these functions.
+ *
+ * A client may use |SSL_SESSION_get_key_exchange_info| to determine the size of
+ * the selected group's prime, but note that servers may select degenerate
+ * groups. */
+
+/* SSL_CTX_set_tmp_dh configures |ctx| to use the group from |dh| as the group
+ * for DHE. Only the group is used, so |dh| needn't have a keypair. It returns
+ * one on success and zero on error. */
+OPENSSL_EXPORT int SSL_CTX_set_tmp_dh(SSL_CTX *ctx, const DH *dh);
+
+/* SSL_set_tmp_dh configures |ssl| to use the group from |dh| as the group for
+ * DHE. Only the group is used, so |dh| needn't have a keypair. It returns one
+ * on success and zero on error. */
+OPENSSL_EXPORT int SSL_set_tmp_dh(SSL *ssl, const DH *dh);
+
+/* SSL_CTX_set_tmp_dh_callback configures |ctx| to use |callback| to determine
+ * the group for DHE ciphers. |callback| should ignore |is_export| and
+ * |keylength| and return a |DH| of the selected group or NULL on error. Only
+ * the parameters are used, so the |DH| needn't have a generated keypair.
+ *
+ * WARNING: The caller does not take ownership of the resulting |DH|, so
+ * |callback| must save and release the object elsewhere. */
+OPENSSL_EXPORT void SSL_CTX_set_tmp_dh_callback(
+    SSL_CTX *ctx, DH *(*callback)(SSL *ssl, int is_export, int keylength));
+
+/* SSL_set_tmp_dh_callback configures |ssl| to use |callback| to determine the
+ * group for DHE ciphers. |callback| should ignore |is_export| and |keylength|
+ * and return a |DH| of the selected group or NULL on error. Only the
+ * parameters are used, so the |DH| needn't have a generated keypair.
+ *
+ * WARNING: The caller does not take ownership of the resulting |DH|, so
+ * |callback| must save and release the object elsewhere. */
+OPENSSL_EXPORT void SSL_set_tmp_dh_callback(SSL *ssl,
+                                            DH *(*dh)(SSL *ssl, int is_export,
+                                                      int keylength));
+
+
+/* Certificate verification.
+ *
+ * SSL may authenticate either endpoint with an X.509 certificate. Typically
+ * this is used to authenticate the server to the client. These functions
+ * configure certificate verification.
+ *
+ * WARNING: By default, certificate verification errors on a client are not
+ * fatal. See |SSL_VERIFY_NONE| This may be configured with
+ * |SSL_CTX_set_verify|.
+ *
+ * By default clients are anonymous but a server may request a certificate from
+ * the client by setting |SSL_VERIFY_PEER|.
+ *
+ * Many of these functions use OpenSSL's legacy X.509 stack which is
+ * underdocumented and deprecated, but the replacement isn't ready yet. For
+ * now, consumers may use the existing stack or bypass it by performing
+ * certificate verification externally. This may be done with
+ * |SSL_CTX_set_cert_verify_callback| or by extracting the chain with
+ * |SSL_get_peer_cert_chain| after the handshake. In the future, functions will
+ * be added to use the SSL stack without dependency on any part of the legacy
+ * X.509 and ASN.1 stack.
+ *
+ * To augment certificate verification, a client may also enable OCSP stapling
+ * (RFC 6066) and Certificate Transparency (RFC 6962) extensions. */
+
+/* SSL_VERIFY_NONE, on a client, verifies the server certificate but does not
+ * make errors fatal. The result may be checked with |SSL_get_verify_result|. On
+ * a server it does not request a client certificate. This is the default. */
+#define SSL_VERIFY_NONE 0x00
+
+/* SSL_VERIFY_PEER, on a client, makes server certificate errors fatal. On a
+ * server it requests a client certificate and makes errors fatal. However,
+ * anonymous clients are still allowed. See
+ * |SSL_VERIFY_FAIL_IF_NO_PEER_CERT|. */
+#define SSL_VERIFY_PEER 0x01
+
+/* SSL_VERIFY_FAIL_IF_NO_PEER_CERT configures a server to reject connections if
+ * the client declines to send a certificate. Otherwise |SSL_VERIFY_PEER| still
+ * allows anonymous clients. */
+#define SSL_VERIFY_FAIL_IF_NO_PEER_CERT 0x02
+
+/* SSL_VERIFY_PEER_IF_NO_OBC configures a server to request a client certificate
+ * if and only if Channel ID is not negotiated. */
+#define SSL_VERIFY_PEER_IF_NO_OBC 0x04
+
+/* SSL_CTX_set_verify configures certificate verification behavior. |mode| is
+ * one of the |SSL_VERIFY_*| values defined above. |callback|, if not NULL, is
+ * used to customize certificate verification. See the behavior of
+ * |X509_STORE_CTX_set_verify_cb|.
+ *
+ * The callback may use |SSL_get_ex_data_X509_STORE_CTX_idx| with
+ * |X509_STORE_CTX_get_ex_data| to look up the |SSL| from |store_ctx|. */
+OPENSSL_EXPORT void SSL_CTX_set_verify(
+    SSL_CTX *ctx, int mode, int (*callback)(int ok, X509_STORE_CTX *store_ctx));
+
+/* SSL_set_verify configures certificate verification behavior. |mode| is one of
+ * the |SSL_VERIFY_*| values defined above. |callback|, if not NULL, is used to
+ * customize certificate verification. See the behavior of
+ * |X509_STORE_CTX_set_verify_cb|.
+ *
+ * The callback may use |SSL_get_ex_data_X509_STORE_CTX_idx| with
+ * |X509_STORE_CTX_get_ex_data| to look up the |SSL| from |store_ctx|. */
+OPENSSL_EXPORT void SSL_set_verify(SSL *ssl, int mode,
+                                   int (*callback)(int ok,
+                                                   X509_STORE_CTX *store_ctx));
+
+/* SSL_CTX_get_verify_mode returns |ctx|'s verify mode, set by
+ * |SSL_CTX_set_verify|. */
+OPENSSL_EXPORT int SSL_CTX_get_verify_mode(const SSL_CTX *ctx);
+
+/* SSL_get_verify_mode returns |ssl|'s verify mode, set by |SSL_CTX_set_verify|
+ * or |SSL_set_verify|. */
+OPENSSL_EXPORT int SSL_get_verify_mode(const SSL *ssl);
+
+/* SSL_CTX_get_verify_callback returns the callback set by
+ * |SSL_CTX_set_verify|. */
+OPENSSL_EXPORT int (*SSL_CTX_get_verify_callback(const SSL_CTX *ctx))(
+    int ok, X509_STORE_CTX *store_ctx);
+
+/* SSL_get_verify_callback returns the callback set by |SSL_CTX_set_verify| or
+ * |SSL_set_verify|. */
+OPENSSL_EXPORT int (*SSL_get_verify_callback(const SSL *ssl))(
+    int ok, X509_STORE_CTX *store_ctx);
+
+/* SSL_CTX_set_verify_depth sets the maximum depth of a certificate chain
+ * accepted in verification. This number does not include the leaf, so a depth
+ * of 1 allows the leaf and one CA certificate. */
+OPENSSL_EXPORT void SSL_CTX_set_verify_depth(SSL_CTX *ctx, int depth);
+
+/* SSL_set_verify_depth sets the maximum depth of a certificate chain accepted
+ * in verification. This number does not include the leaf, so a depth of 1
+ * allows the leaf and one CA certificate. */
+OPENSSL_EXPORT void SSL_set_verify_depth(SSL *ssl, int depth);
+
+/* SSL_CTX_get_verify_depth returns the maximum depth of a certificate accepted
+ * in verification. */
+OPENSSL_EXPORT int SSL_CTX_get_verify_depth(const SSL_CTX *ctx);
+
+/* SSL_get_verify_depth returns the maximum depth of a certificate accepted in
+ * verification. */
+OPENSSL_EXPORT int SSL_get_verify_depth(const SSL *ssl);
+
+/* SSL_CTX_set1_param sets verification parameters from |param|. It returns one
+ * on success and zero on failure. The caller retains ownership of |param|. */
+OPENSSL_EXPORT int SSL_CTX_set1_param(SSL_CTX *ctx,
+                                      const X509_VERIFY_PARAM *param);
+
+/* SSL_set1_param sets verification parameters from |param|. It returns one on
+ * success and zero on failure. The caller retains ownership of |param|. */
+OPENSSL_EXPORT int SSL_set1_param(SSL *ssl,
+                                  const X509_VERIFY_PARAM *param);
+
+/* SSL_CTX_get0_param returns |ctx|'s |X509_VERIFY_PARAM| for certificate
+ * verification. The caller must not release the returned pointer but may call
+ * functions on it to configure it. */
+OPENSSL_EXPORT X509_VERIFY_PARAM *SSL_CTX_get0_param(SSL_CTX *ctx);
+
+/* SSL_get0_param returns |ssl|'s |X509_VERIFY_PARAM| for certificate
+ * verification. The caller must not release the returned pointer but may call
+ * functions on it to configure it. */
+OPENSSL_EXPORT X509_VERIFY_PARAM *SSL_get0_param(SSL *ssl);
+
+/* SSL_CTX_set_purpose sets |ctx|'s |X509_VERIFY_PARAM|'s 'purpose' parameter to
+ * |purpose|. It returns one on success and zero on error. */
+OPENSSL_EXPORT int SSL_CTX_set_purpose(SSL_CTX *ctx, int purpose);
+
+/* SSL_set_purpose sets |ssl|'s |X509_VERIFY_PARAM|'s 'purpose' parameter to
+ * |purpose|. It returns one on success and zero on error. */
+OPENSSL_EXPORT int SSL_set_purpose(SSL *ssl, int purpose);
+
+/* SSL_CTX_set_trust sets |ctx|'s |X509_VERIFY_PARAM|'s 'trust' parameter to
+ * |trust|. It returns one on success and zero on error. */
+OPENSSL_EXPORT int SSL_CTX_set_trust(SSL_CTX *ctx, int trust);
+
+/* SSL_set_trust sets |ssl|'s |X509_VERIFY_PARAM|'s 'trust' parameter to
+ * |trust|. It returns one on success and zero on error. */
+OPENSSL_EXPORT int SSL_set_trust(SSL *ssl, int trust);
+
+/* SSL_CTX_set_cert_store sets |ctx|'s certificate store to |store|. It takes
+ * ownership of |store|. The store is used for certificate verification.
+ *
+ * The store is also used for the auto-chaining feature, but this is deprecated.
+ * See also |SSL_MODE_NO_AUTO_CHAIN|. */
+OPENSSL_EXPORT void SSL_CTX_set_cert_store(SSL_CTX *ctx, X509_STORE *store);
+
+/* SSL_CTX_get_cert_store returns |ctx|'s certificate store. */
+OPENSSL_EXPORT X509_STORE *SSL_CTX_get_cert_store(const SSL_CTX *ctx);
+
+/* SSL_CTX_set_default_verify_paths loads the OpenSSL system-default trust
+ * anchors into |ctx|'s store. It returns one on success and zero on failure. */
+OPENSSL_EXPORT int SSL_CTX_set_default_verify_paths(SSL_CTX *ctx);
+
+/* SSL_CTX_load_verify_locations loads trust anchors into |ctx|'s store from
+ * |ca_file| and |ca_dir|, either of which may be NULL. If |ca_file| is passed,
+ * it is opened and PEM-encoded CA certificates are read. If |ca_dir| is passed,
+ * it is treated as a directory in OpenSSL's hashed directory format. It returns
+ * one on success and zero on failure.
+ *
+ * See
+ * https://www.openssl.org/docs/manmaster/ssl/SSL_CTX_load_verify_locations.html
+ * for documentation on the directory format. */
+OPENSSL_EXPORT int SSL_CTX_load_verify_locations(SSL_CTX *ctx,
+                                                 const char *ca_file,
+                                                 const char *ca_dir);
+
+/* SSL_get_verify_result returns the result of certificate verification. It is
+ * either |X509_V_OK| or a |X509_V_ERR_*| value. */
+OPENSSL_EXPORT long SSL_get_verify_result(const SSL *ssl);
+
+/* SSL_set_verify_result overrides the result of certificate verification. */
+OPENSSL_EXPORT void SSL_set_verify_result(SSL *ssl, long result);
+
+/* SSL_get_ex_data_X509_STORE_CTX_idx returns the ex_data index used to look up
+ * the |SSL| associated with an |X509_STORE_CTX| in the verify callback. */
+OPENSSL_EXPORT int SSL_get_ex_data_X509_STORE_CTX_idx(void);
+
+/* SSL_CTX_set_cert_verify_callback sets a custom callback to be called on
+ * certificate verification rather than |X509_verify_cert|. |store_ctx| contains
+ * the verification parameters. The callback should return one on success and
+ * zero on fatal error. It may use |X509_STORE_CTX_set_error| to set a
+ * verification result.
+ *
+ * The callback may use either the |arg| parameter or
+ * |SSL_get_ex_data_X509_STORE_CTX_idx| to recover the associated |SSL|
+ * object. */
+OPENSSL_EXPORT void SSL_CTX_set_cert_verify_callback(
+    SSL_CTX *ctx, int (*callback)(X509_STORE_CTX *store_ctx, void *arg),
+    void *arg);
+
+/* SSL_enable_signed_cert_timestamps causes |ssl| (which must be the client end
+ * of a connection) to request SCTs from the server. See
+ * https://tools.ietf.org/html/rfc6962. It returns one.
+ *
+ * Call |SSL_get0_signed_cert_timestamp_list| to recover the SCT after the
+ * handshake. */
+OPENSSL_EXPORT int SSL_enable_signed_cert_timestamps(SSL *ssl);
+
+/* SSL_CTX_enable_signed_cert_timestamps enables SCT requests on all client SSL
+ * objects created from |ctx|.
+ *
+ * Call |SSL_get0_signed_cert_timestamp_list| to recover the SCT after the
+ * handshake. */
+OPENSSL_EXPORT void SSL_CTX_enable_signed_cert_timestamps(SSL_CTX *ctx);
+
+/* SSL_enable_ocsp_stapling causes |ssl| (which must be the client end of a
+ * connection) to request a stapled OCSP response from the server. It returns
+ * one.
+ *
+ * Call |SSL_get0_ocsp_response| to recover the OCSP response after the
+ * handshake. */
+OPENSSL_EXPORT int SSL_enable_ocsp_stapling(SSL *ssl);
+
+/* SSL_CTX_enable_ocsp_stapling enables OCSP stapling on all client SSL objects
+ * created from |ctx|.
+ *
+ * Call |SSL_get0_ocsp_response| to recover the OCSP response after the
+ * handshake. */
+OPENSSL_EXPORT void SSL_CTX_enable_ocsp_stapling(SSL_CTX *ctx);
+
+
+/* Client certificate CA list.
+ *
+ * When requesting a client certificate, a server may advertise a list of
+ * certificate authorities which are accepted. These functions may be used to
+ * configure this list. */
+
+/* SSL_set_client_CA_list sets |ssl|'s client certificate CA list to
+ * |name_list|. It takes ownership of |name_list|. */
+OPENSSL_EXPORT void SSL_set_client_CA_list(SSL *ssl,
+                                           STACK_OF(X509_NAME) *name_list);
+
+/* SSL_CTX_set_client_CA_list sets |ctx|'s client certificate CA list to
+ * |name_list|. It takes ownership of |name_list|. */
+OPENSSL_EXPORT void SSL_CTX_set_client_CA_list(SSL_CTX *ctx,
+                                               STACK_OF(X509_NAME) *name_list);
+
+/* SSL_get_client_CA_list returns |ssl|'s client certificate CA list. If |ssl|
+ * has not been configured as a client, this is the list configured by
+ * |SSL_CTX_set_client_CA_list|.
+ *
+ * If configured as a client, it returns the client certificate CA list sent by
+ * the server. In this mode, the behavior is undefined except during the
+ * callbacks set by |SSL_CTX_set_cert_cb| and |SSL_CTX_set_client_cert_cb| or
+ * when the handshake is paused because of them. */
+OPENSSL_EXPORT STACK_OF(X509_NAME) *SSL_get_client_CA_list(const SSL *ssl);
+
+/* SSL_CTX_get_client_CA_list returns |ctx|'s client certificate CA list. */
+OPENSSL_EXPORT STACK_OF(X509_NAME) *
+    SSL_CTX_get_client_CA_list(const SSL_CTX *ctx);
+
+/* SSL_add_client_CA appends |x509|'s subject to the client certificate CA list.
+ * It returns one on success or zero on error. The caller retains ownership of
+ * |x509|. */
+OPENSSL_EXPORT int SSL_add_client_CA(SSL *ssl, X509 *x509);
+
+/* SSL_CTX_add_client_CA appends |x509|'s subject to the client certificate CA
+ * list. It returns one on success or zero on error. The caller retains
+ * ownership of |x509|. */
+OPENSSL_EXPORT int SSL_CTX_add_client_CA(SSL_CTX *ctx, X509 *x509);
+
+/* SSL_load_client_CA_file opens |file| and reads PEM-encoded certificates from
+ * it. It returns a newly-allocated stack of the certificate subjects or NULL
+ * on error. */
+OPENSSL_EXPORT STACK_OF(X509_NAME) *SSL_load_client_CA_file(const char *file);
+
+/* SSL_dup_CA_list makes a deep copy of |list|. It returns the new list on
+ * success or NULL on allocation error. */
+OPENSSL_EXPORT STACK_OF(X509_NAME) *SSL_dup_CA_list(STACK_OF(X509_NAME) *list);
+
+/* SSL_add_file_cert_subjects_to_stack behaves like |SSL_load_client_CA_file|
+ * but appends the result to |out|. It returns one on success or zero on
+ * error. */
+OPENSSL_EXPORT int SSL_add_file_cert_subjects_to_stack(STACK_OF(X509_NAME) *out,
+                                                       const char *file);
+
+/* SSL_add_dir_cert_subjects_to_stack lists files in directory |dir|. It calls
+ * |SSL_add_file_cert_subjects_to_stack| on each file and returns one on success
+ * or zero on error. */
+OPENSSL_EXPORT int SSL_add_dir_cert_subjects_to_stack(STACK_OF(X509_NAME) *out,
+                                                      const char *dir);
+
+
+/* Server name indication.
+ *
+ * The server_name extension (RFC 3546) allows the client to advertise the name
+ * of the server it is connecting to. This is used in virtual hosting
+ * deployments to select one of a several certificates on a single IP. Only the
+ * host_name name type is supported. */
+
+#define TLSEXT_NAMETYPE_host_name 0
+
+/* SSL_set_tlsext_host_name, for a client, configures |ssl| to advertise |name|
+ * in the server_name extension. It returns one on success and zero on error. */
+OPENSSL_EXPORT int SSL_set_tlsext_host_name(SSL *ssl, const char *name);
+
+/* SSL_get_servername, for a server, returns the hostname supplied by the
+ * client or NULL if there was none. The |type| argument must be
+ * |TLSEXT_NAMETYPE_host_name|. */
+OPENSSL_EXPORT const char *SSL_get_servername(const SSL *ssl, const int type);
+
+/* SSL_get_servername_type, for a server, returns |TLSEXT_NAMETYPE_host_name|
+ * if the client sent a hostname and -1 otherwise. */
+OPENSSL_EXPORT int SSL_get_servername_type(const SSL *ssl);
+
+/* SSL_CTX_set_tlsext_servername_callback configures |callback| to be called on
+ * the server after ClientHello extensions have been parsed and returns one.
+ * The callback may use |SSL_get_servername| to examine the server_name extension
+ * and returns a |SSL_TLSEXT_ERR_*| value. The value of |arg| may be set by
+ * calling |SSL_CTX_set_tlsext_servername_arg|.
+ *
+ * If the callback returns |SSL_TLSEXT_ERR_NOACK|, the server_name extension is
+ * not acknowledged in the ServerHello. If the return value is
+ * |SSL_TLSEXT_ERR_ALERT_FATAL| or |SSL_TLSEXT_ERR_ALERT_WARNING| then
+ * |*out_alert| must be set to the alert value to send. */
+OPENSSL_EXPORT int SSL_CTX_set_tlsext_servername_callback(
+    SSL_CTX *ctx, int (*callback)(SSL *ssl, int *out_alert, void *arg));
+
+/* SSL_CTX_set_tlsext_servername_arg sets the argument to the servername
+ * callback and returns one. See |SSL_CTX_set_tlsext_servername_callback|. */
+OPENSSL_EXPORT int SSL_CTX_set_tlsext_servername_arg(SSL_CTX *ctx, void *arg);
+
+/* SSL_TLSEXT_ERR_* are values returned by some extension-related callbacks. */
+#define SSL_TLSEXT_ERR_OK 0
+#define SSL_TLSEXT_ERR_ALERT_WARNING 1
+#define SSL_TLSEXT_ERR_ALERT_FATAL 2
+#define SSL_TLSEXT_ERR_NOACK 3
+
+
+/* Application-layer protocol negotation.
+ *
+ * The ALPN extension (RFC 7301) allows negotiating different application-layer
+ * protocols over a single port. This is used, for example, to negotiate
+ * HTTP/2. */
+
+/* SSL_CTX_set_alpn_protos sets the client ALPN protocol list on |ctx| to
+ * |protos|. |protos| must be in wire-format (i.e. a series of non-empty, 8-bit
+ * length-prefixed strings). It returns zero on success and one on failure.
+ * Configuring this list enables ALPN on a client.
+ *
+ * WARNING: this function is dangerous because it breaks the usual return value
+ * convention. */
+OPENSSL_EXPORT int SSL_CTX_set_alpn_protos(SSL_CTX *ctx, const uint8_t *protos,
+                                           unsigned protos_len);
+
+/* SSL_set_alpn_protos sets the client ALPN protocol list on |ssl| to |protos|.
+ * |protos| must be in wire-format (i.e. a series of non-empty, 8-bit
+ * length-prefixed strings). It returns zero on success and one on failure.
+ * Configuring this list enables ALPN on a client.
+ *
+ * WARNING: this function is dangerous because it breaks the usual return value
+ * convention. */
+OPENSSL_EXPORT int SSL_set_alpn_protos(SSL *ssl, const uint8_t *protos,
+                                       unsigned protos_len);
+
+/* SSL_CTX_set_alpn_select_cb sets a callback function on |ctx| that is called
+ * during ClientHello processing in order to select an ALPN protocol from the
+ * client's list of offered protocols. Configuring this callback enables ALPN on
+ * a server.
+ *
+ * The callback is passed a wire-format (i.e. a series of non-empty, 8-bit
+ * length-prefixed strings) ALPN protocol list in |in|. It should set |*out| and
+ * |*out_len| to the selected protocol and return |SSL_TLSEXT_ERR_OK| on
+ * success. It does not pass ownership of the buffer. Otherwise, it should
+ * return |SSL_TLSEXT_ERR_NOACK|. Other |SSL_TLSEXT_ERR_*| values are
+ * unimplemented and will be treated as |SSL_TLSEXT_ERR_NOACK|. */
+OPENSSL_EXPORT void SSL_CTX_set_alpn_select_cb(
+    SSL_CTX *ctx, int (*cb)(SSL *ssl, const uint8_t **out, uint8_t *out_len,
+                            const uint8_t *in, unsigned in_len, void *arg),
+    void *arg);
+
+/* SSL_get0_alpn_selected gets the selected ALPN protocol (if any) from |ssl|.
+ * On return it sets |*out_data| to point to |*out_len| bytes of protocol name
+ * (not including the leading length-prefix byte). If the server didn't respond
+ * with a negotiated protocol then |*out_len| will be zero. */
+OPENSSL_EXPORT void SSL_get0_alpn_selected(const SSL *ssl,
+                                           const uint8_t **out_data,
+                                           unsigned *out_len);
+
+
+/* Next protocol negotiation.
+ *
+ * The NPN extension (draft-agl-tls-nextprotoneg-03) is the predecessor to ALPN
+ * and deprecated in favor of it. */
+
+/* SSL_CTX_set_next_protos_advertised_cb sets a callback that is called when a
+ * TLS server needs a list of supported protocols for Next Protocol
+ * Negotiation. The returned list must be in wire format. The list is returned
+ * by setting |*out| to point to it and |*out_len| to its length. This memory
+ * will not be modified, but one should assume that |ssl| keeps a reference to
+ * it.
+ *
+ * The callback should return |SSL_TLSEXT_ERR_OK| if it wishes to advertise.
+ * Otherwise, no such extension will be included in the ServerHello. */
+OPENSSL_EXPORT void SSL_CTX_set_next_protos_advertised_cb(
+    SSL_CTX *ctx,
+    int (*cb)(SSL *ssl, const uint8_t **out, unsigned *out_len, void *arg),
+    void *arg);
+
+/* SSL_CTX_set_next_proto_select_cb sets a callback that is called when a client
+ * needs to select a protocol from the server's provided list. |*out| must be
+ * set to point to the selected protocol (which may be within |in|). The length
+ * of the protocol name must be written into |*out_len|. The server's advertised
+ * protocols are provided in |in| and |in_len|. The callback can assume that
+ * |in| is syntactically valid.
+ *
+ * The client must select a protocol. It is fatal to the connection if this
+ * callback returns a value other than |SSL_TLSEXT_ERR_OK|.
+ *
+ * Configuring this callback enables NPN on a client. */
+OPENSSL_EXPORT void SSL_CTX_set_next_proto_select_cb(
+    SSL_CTX *ctx, int (*cb)(SSL *ssl, uint8_t **out, uint8_t *out_len,
+                            const uint8_t *in, unsigned in_len, void *arg),
+    void *arg);
+
+/* SSL_get0_next_proto_negotiated sets |*out_data| and |*out_len| to point to
+ * the client's requested protocol for this connection. If the client didn't
+ * request any protocol, then |*out_data| is set to NULL.
+ *
+ * Note that the client can request any protocol it chooses. The value returned
+ * from this function need not be a member of the list of supported protocols
+ * provided by the server. */
+OPENSSL_EXPORT void SSL_get0_next_proto_negotiated(const SSL *ssl,
+                                                   const uint8_t **out_data,
+                                                   unsigned *out_len);
+
+/* SSL_select_next_proto implements the standard protocol selection. It is
+ * expected that this function is called from the callback set by
+ * |SSL_CTX_set_next_proto_select_cb|.
+ *
+ * The protocol data is assumed to be a vector of 8-bit, length prefixed byte
+ * strings. The length byte itself is not included in the length. A byte
+ * string of length 0 is invalid. No byte string may be truncated.
+ *
+ * The current, but experimental algorithm for selecting the protocol is:
+ *
+ * 1) If the server doesn't support NPN then this is indicated to the
+ * callback. In this case, the client application has to abort the connection
+ * or have a default application level protocol.
+ *
+ * 2) If the server supports NPN, but advertises an empty list then the
+ * client selects the first protcol in its list, but indicates via the
+ * API that this fallback case was enacted.
+ *
+ * 3) Otherwise, the client finds the first protocol in the server's list
+ * that it supports and selects this protocol. This is because it's
+ * assumed that the server has better information about which protocol
+ * a client should use.
+ *
+ * 4) If the client doesn't support any of the server's advertised
+ * protocols, then this is treated the same as case 2.
+ *
+ * It returns either |OPENSSL_NPN_NEGOTIATED| if a common protocol was found, or
+ * |OPENSSL_NPN_NO_OVERLAP| if the fallback case was reached. */
+OPENSSL_EXPORT int SSL_select_next_proto(uint8_t **out, uint8_t *out_len,
+                                         const uint8_t *server,
+                                         unsigned server_len,
+                                         const uint8_t *client,
+                                         unsigned client_len);
+
+#define OPENSSL_NPN_UNSUPPORTED 0
+#define OPENSSL_NPN_NEGOTIATED 1
+#define OPENSSL_NPN_NO_OVERLAP 2
+
+
+/* Channel ID.
+ *
+ * See draft-balfanz-tls-channelid-01. */
+
+/* SSL_CTX_enable_tls_channel_id either configures a TLS server to accept TLS
+ * Channel IDs from clients, or configures a client to send TLS Channel IDs to
+ * a server. It returns one. */
+OPENSSL_EXPORT int SSL_CTX_enable_tls_channel_id(SSL_CTX *ctx);
+
+/* SSL_enable_tls_channel_id either configures a TLS server to accept TLS
+ * Channel IDs from clients, or configures a client to send TLS Channel IDs to
+ * server. It returns one. */
+OPENSSL_EXPORT int SSL_enable_tls_channel_id(SSL *ssl);
+
+/* SSL_CTX_set1_tls_channel_id configures a TLS client to send a TLS Channel ID
+ * to compatible servers. |private_key| must be a P-256 EC key. It returns one
+ * on success and zero on error. */
+OPENSSL_EXPORT int SSL_CTX_set1_tls_channel_id(SSL_CTX *ctx,
+                                               EVP_PKEY *private_key);
+
+/* SSL_set1_tls_channel_id configures a TLS client to send a TLS Channel ID to
+ * compatible servers. |private_key| must be a P-256 EC key. It returns one on
+ * success and zero on error. */
+OPENSSL_EXPORT int SSL_set1_tls_channel_id(SSL *ssl, EVP_PKEY *private_key);
+
+/* SSL_get_tls_channel_id gets the client's TLS Channel ID from a server |SSL*|
+ * and copies up to the first |max_out| bytes into |out|. The Channel ID
+ * consists of the client's P-256 public key as an (x,y) pair where each is a
+ * 32-byte, big-endian field element. It returns 0 if the client didn't offer a
+ * Channel ID and the length of the complete Channel ID otherwise. */
+OPENSSL_EXPORT size_t SSL_get_tls_channel_id(SSL *ssl, uint8_t *out,
+                                             size_t max_out);
+
+/* SSL_CTX_set_channel_id_cb sets a callback to be called when a TLS Channel ID
+ * is requested. The callback may set |*out_pkey| to a key, passing a reference
+ * to the caller. If none is returned, the handshake will pause and
+ * |SSL_get_error| will return |SSL_ERROR_WANT_CHANNEL_ID_LOOKUP|.
+ *
+ * See also |SSL_ERROR_WANT_CHANNEL_ID_LOOKUP|. */
+OPENSSL_EXPORT void SSL_CTX_set_channel_id_cb(
+    SSL_CTX *ctx, void (*channel_id_cb)(SSL *ssl, EVP_PKEY **out_pkey));
+
+/* SSL_CTX_get_channel_id_cb returns the callback set by
+ * |SSL_CTX_set_channel_id_cb|. */
+OPENSSL_EXPORT void (*SSL_CTX_get_channel_id_cb(SSL_CTX *ctx))(
+    SSL *ssl, EVP_PKEY **out_pkey);
+
+
+/* DTLS-SRTP.
+ *
+ * See RFC 5764. */
+
+/* An SRTP_PROTECTION_PROFILE is an SRTP profile for use with the use_srtp
+ * extension. */
+struct srtp_protection_profile_st {
+  const char *name;
+  unsigned long id;
+} /* SRTP_PROTECTION_PROFILE */;
+
+DECLARE_STACK_OF(SRTP_PROTECTION_PROFILE)
+
+/* SRTP_* define constants for SRTP profiles. */
+#define SRTP_AES128_CM_SHA1_80 0x0001
+#define SRTP_AES128_CM_SHA1_32 0x0002
+#define SRTP_AES128_F8_SHA1_80 0x0003
+#define SRTP_AES128_F8_SHA1_32 0x0004
+#define SRTP_NULL_SHA1_80      0x0005
+#define SRTP_NULL_SHA1_32      0x0006
+#define SRTP_AEAD_AES_128_GCM  0x0007
+#define SRTP_AEAD_AES_256_GCM  0x0008
+
+/* SSL_CTX_set_srtp_profiles enables SRTP for all SSL objects created from
+ * |ctx|. |profile| contains a colon-separated list of profile names. It returns
+ * one on success and zero on failure. */
+OPENSSL_EXPORT int SSL_CTX_set_srtp_profiles(SSL_CTX *ctx,
+                                             const char *profiles);
+
+/* SSL_set_srtp_profiles enables SRTP for |ssl|.  |profile| contains a
+ * colon-separated list of profile names. It returns one on success and zero on
+ * failure. */
+OPENSSL_EXPORT int SSL_set_srtp_profiles(SSL *ssl, const char *profiles);
+
+/* SSL_get_srtp_profiles returns the SRTP profiles supported by |ssl|. */
+OPENSSL_EXPORT STACK_OF(SRTP_PROTECTION_PROFILE) *SSL_get_srtp_profiles(
+    SSL *ssl);
+
+/* SSL_get_selected_srtp_profile returns the selected SRTP profile, or NULL if
+ * SRTP was not negotiated. */
+OPENSSL_EXPORT const SRTP_PROTECTION_PROFILE *SSL_get_selected_srtp_profile(
+    SSL *ssl);
+
+
+/* Pre-shared keys.
+ *
+ * Connections may be configured with PSK (Pre-Shared Key) cipher suites. These
+ * authenticate using out-of-band pre-shared keys rather than certificates. See
+ * RFC 4279.
+ *
+ * This implementation uses NUL-terminated C strings for identities and identity
+ * hints, so values with a NUL character are not supported. (RFC 4279 does not
+ * specify the format of an identity.) */
+
+/* PSK_MAX_IDENTITY_LEN is the maximum supported length of a PSK identity,
+ * excluding the NUL terminator. */
+#define PSK_MAX_IDENTITY_LEN 128
+
+/* PSK_MAX_PSK_LEN is the maximum supported length of a pre-shared key. */
+#define PSK_MAX_PSK_LEN 256
+
+/* SSL_CTX_set_psk_client_callback sets the callback to be called when PSK is
+ * negotiated on the client. This callback must be set to enable PSK cipher
+ * suites on the client.
+ *
+ * The callback is passed the identity hint in |hint| or NULL if none was
+ * provided. It should select a PSK identity and write the identity and the
+ * corresponding PSK to |identity| and |psk|, respectively. The identity is
+ * written as a NUL-terminated C string of length (excluding the NUL terminator)
+ * at most |max_identity_len|. The PSK's length must be at most |max_psk_len|.
+ * The callback returns the length of the PSK or 0 if no suitable identity was
+ * found. */
+OPENSSL_EXPORT void SSL_CTX_set_psk_client_callback(
+    SSL_CTX *ctx,
+    unsigned (*psk_client_callback)(
+        SSL *ssl, const char *hint, char *identity,
+        unsigned max_identity_len, uint8_t *psk, unsigned max_psk_len));
+
+/* SSL_set_psk_client_callback sets the callback to be called when PSK is
+ * negotiated on the client. This callback must be set to enable PSK cipher
+ * suites on the client. See also |SSL_CTX_set_psk_client_callback|. */
+OPENSSL_EXPORT void SSL_set_psk_client_callback(
+    SSL *ssl, unsigned (*psk_client_callback)(SSL *ssl, const char *hint,
+                                              char *identity,
+                                              unsigned max_identity_len,
+                                              uint8_t *psk,
+                                              unsigned max_psk_len));
+
+/* SSL_CTX_set_psk_server_callback sets the callback to be called when PSK is
+ * negotiated on the server. This callback must be set to enable PSK cipher
+ * suites on the server.
+ *
+ * The callback is passed the identity in |identity|. It should write a PSK of
+ * length at most |max_psk_len| to |psk| and return the number of bytes written
+ * or zero if the PSK identity is unknown. */
+OPENSSL_EXPORT void SSL_CTX_set_psk_server_callback(
+    SSL_CTX *ctx,
+    unsigned (*psk_server_callback)(SSL *ssl, const char *identity,
+                                    uint8_t *psk,
+                                    unsigned max_psk_len));
+
+/* SSL_set_psk_server_callback sets the callback to be called when PSK is
+ * negotiated on the server. This callback must be set to enable PSK cipher
+ * suites on the server. See also |SSL_CTX_set_psk_server_callback|. */
+OPENSSL_EXPORT void SSL_set_psk_server_callback(
+    SSL *ssl,
+    unsigned (*psk_server_callback)(SSL *ssl, const char *identity,
+                                    uint8_t *psk,
+                                    unsigned max_psk_len));
+
+/* SSL_CTX_use_psk_identity_hint configures server connections to advertise an
+ * identity hint of |identity_hint|. It returns one on success and zero on
+ * error. */
+OPENSSL_EXPORT int SSL_CTX_use_psk_identity_hint(SSL_CTX *ctx,
+                                                 const char *identity_hint);
+
+/* SSL_use_psk_identity_hint configures server connections to advertise an
+ * identity hint of |identity_hint|. It returns one on success and zero on
+ * error. */
+OPENSSL_EXPORT int SSL_use_psk_identity_hint(SSL *ssl,
+                                             const char *identity_hint);
+
+/* SSL_get_psk_identity_hint returns the PSK identity hint advertised for |ssl|
+ * or NULL if there is none. */
+OPENSSL_EXPORT const char *SSL_get_psk_identity_hint(const SSL *ssl);
+
+/* SSL_get_psk_identity, after the handshake completes, returns the PSK identity
+ * that was negotiated by |ssl| or NULL if PSK was not used. */
+OPENSSL_EXPORT const char *SSL_get_psk_identity(const SSL *ssl);
+
+
+/* Alerts.
+ *
+ * TLS and SSL 3.0 use alerts to signal error conditions. Alerts have a type
+ * (warning or fatal) and description. OpenSSL internally handles fatal alerts
+ * with dedicated error codes (see |SSL_AD_REASON_OFFSET|). Except for
+ * close_notify, warning alerts are silently ignored and may only be surfaced
+ * with |SSL_CTX_set_info_callback|. */
+
+/* SSL_AD_REASON_OFFSET is the offset between error reasons and |SSL_AD_*|
+ * values. Any error code under |ERR_LIB_SSL| with an error reason above this
+ * value corresponds to an alert description. Consumers may add or subtract
+ * |SSL_AD_REASON_OFFSET| to convert between them.
+ *
+ * make_errors.go reserves error codes above 1000 for manually-assigned errors.
+ * This value must be kept in sync with reservedReasonCode in make_errors.h */
+#define SSL_AD_REASON_OFFSET 1000
+
+/* SSL_AD_* are alert descriptions for SSL 3.0 and TLS. */
+#define SSL_AD_CLOSE_NOTIFY SSL3_AD_CLOSE_NOTIFY
+#define SSL_AD_UNEXPECTED_MESSAGE SSL3_AD_UNEXPECTED_MESSAGE
+#define SSL_AD_BAD_RECORD_MAC SSL3_AD_BAD_RECORD_MAC
+#define SSL_AD_DECRYPTION_FAILED TLS1_AD_DECRYPTION_FAILED
+#define SSL_AD_RECORD_OVERFLOW TLS1_AD_RECORD_OVERFLOW
+#define SSL_AD_DECOMPRESSION_FAILURE SSL3_AD_DECOMPRESSION_FAILURE
+#define SSL_AD_HANDSHAKE_FAILURE SSL3_AD_HANDSHAKE_FAILURE
+#define SSL_AD_NO_CERTIFICATE SSL3_AD_NO_CERTIFICATE /* Not used in TLS */
+#define SSL_AD_BAD_CERTIFICATE SSL3_AD_BAD_CERTIFICATE
+#define SSL_AD_UNSUPPORTED_CERTIFICATE SSL3_AD_UNSUPPORTED_CERTIFICATE
+#define SSL_AD_CERTIFICATE_REVOKED SSL3_AD_CERTIFICATE_REVOKED
+#define SSL_AD_CERTIFICATE_EXPIRED SSL3_AD_CERTIFICATE_EXPIRED
+#define SSL_AD_CERTIFICATE_UNKNOWN SSL3_AD_CERTIFICATE_UNKNOWN
+#define SSL_AD_ILLEGAL_PARAMETER SSL3_AD_ILLEGAL_PARAMETER
+#define SSL_AD_UNKNOWN_CA TLS1_AD_UNKNOWN_CA
+#define SSL_AD_ACCESS_DENIED TLS1_AD_ACCESS_DENIED
+#define SSL_AD_DECODE_ERROR TLS1_AD_DECODE_ERROR
+#define SSL_AD_DECRYPT_ERROR TLS1_AD_DECRYPT_ERROR
+#define SSL_AD_EXPORT_RESTRICTION TLS1_AD_EXPORT_RESTRICTION
+#define SSL_AD_PROTOCOL_VERSION TLS1_AD_PROTOCOL_VERSION
+#define SSL_AD_INSUFFICIENT_SECURITY TLS1_AD_INSUFFICIENT_SECURITY
+#define SSL_AD_INTERNAL_ERROR TLS1_AD_INTERNAL_ERROR
+#define SSL_AD_USER_CANCELLED TLS1_AD_USER_CANCELLED
+#define SSL_AD_NO_RENEGOTIATION TLS1_AD_NO_RENEGOTIATION
+#define SSL_AD_UNSUPPORTED_EXTENSION TLS1_AD_UNSUPPORTED_EXTENSION
+#define SSL_AD_CERTIFICATE_UNOBTAINABLE TLS1_AD_CERTIFICATE_UNOBTAINABLE
+#define SSL_AD_UNRECOGNIZED_NAME TLS1_AD_UNRECOGNIZED_NAME
+#define SSL_AD_BAD_CERTIFICATE_STATUS_RESPONSE \
+  TLS1_AD_BAD_CERTIFICATE_STATUS_RESPONSE
+#define SSL_AD_BAD_CERTIFICATE_HASH_VALUE TLS1_AD_BAD_CERTIFICATE_HASH_VALUE
+#define SSL_AD_UNKNOWN_PSK_IDENTITY TLS1_AD_UNKNOWN_PSK_IDENTITY
+#define SSL_AD_INAPPROPRIATE_FALLBACK SSL3_AD_INAPPROPRIATE_FALLBACK
+
+/* SSL_alert_type_string_long returns a string description of |value| as an
+ * alert type (warning or fatal). */
+OPENSSL_EXPORT const char *SSL_alert_type_string_long(int value);
+
+/* SSL_alert_desc_string_long returns a string description of |value| as an
+ * alert description or "unknown" if unknown. */
+OPENSSL_EXPORT const char *SSL_alert_desc_string_long(int value);
+
+
+/* ex_data functions.
+ *
+ * See |ex_data.h| for details. */
+
+OPENSSL_EXPORT int SSL_set_ex_data(SSL *ssl, int idx, void *data);
+OPENSSL_EXPORT void *SSL_get_ex_data(const SSL *ssl, int idx);
+OPENSSL_EXPORT int SSL_get_ex_new_index(long argl, void *argp,
+                                        CRYPTO_EX_unused *unused,
+                                        CRYPTO_EX_dup *dup_func,
+                                        CRYPTO_EX_free *free_func);
+
+OPENSSL_EXPORT int SSL_SESSION_set_ex_data(SSL_SESSION *session, int idx,
+                                           void *data);
+OPENSSL_EXPORT void *SSL_SESSION_get_ex_data(const SSL_SESSION *session,
+                                             int idx);
+OPENSSL_EXPORT int SSL_SESSION_get_ex_new_index(long argl, void *argp,
+                                                CRYPTO_EX_unused *unused,
+                                                CRYPTO_EX_dup *dup_func,
+                                                CRYPTO_EX_free *free_func);
+
+OPENSSL_EXPORT int SSL_CTX_set_ex_data(SSL_CTX *ctx, int idx, void *data);
+OPENSSL_EXPORT void *SSL_CTX_get_ex_data(const SSL_CTX *ctx, int idx);
+OPENSSL_EXPORT int SSL_CTX_get_ex_new_index(long argl, void *argp,
+                                            CRYPTO_EX_unused *unused,
+                                            CRYPTO_EX_dup *dup_func,
+                                            CRYPTO_EX_free *free_func);
+
+
+/* Obscure functions. */
+
+/* SSL_get_rc4_state sets |*read_key| and |*write_key| to the RC4 states for
+ * the read and write directions. It returns one on success or zero if |ssl|
+ * isn't using an RC4-based cipher suite. */
+OPENSSL_EXPORT int SSL_get_rc4_state(const SSL *ssl, const RC4_KEY **read_key,
+                                     const RC4_KEY **write_key);
+
+/* SSL_get_ivs sets |*out_iv_len| to the length of the IVs for the ciphers
+ * underlying |ssl| and sets |*out_read_iv| and |*out_write_iv| to point to the
+ * current IVs for the read and write directions. This is only meaningful for
+ * connections with implicit IVs (i.e. CBC mode with SSLv3 or TLS 1.0).
+ *
+ * It returns one on success or zero on error. */
+OPENSSL_EXPORT int SSL_get_ivs(const SSL *ssl, const uint8_t **out_read_iv,
+                               const uint8_t **out_write_iv,
+                               size_t *out_iv_len);
+
+/* SSL_get_structure_sizes returns the sizes of the SSL, SSL_CTX and
+ * SSL_SESSION structures so that a test can ensure that outside code agrees on
+ * these values. */
+OPENSSL_EXPORT void SSL_get_structure_sizes(size_t *ssl_size,
+                                            size_t *ssl_ctx_size,
+                                            size_t *ssl_session_size);
+
+/* SSL_CTX_set_msg_callback installs |cb| as the message callback for |ctx|.
+ * This callback will be called when sending or receiving low-level record
+ * headers, complete handshake messages, ChangeCipherSpec, and alerts.
+ * |write_p| is one for outgoing messages and zero for incoming messages.
+ *
+ * For each record header, |cb| is called with |version| = 0 and |content_type|
+ * = |SSL3_RT_HEADER|. The |len| bytes from |buf| contain the header. Note that
+ * this does not include the record body. If the record is sealed, the length
+ * in the header is the length of the ciphertext.
+ *
+ * For each handshake message, ChangeCipherSpec, and alert, |version| is the
+ * protocol version and |content_type| is the corresponding record type. The
+ * |len| bytes from |buf| contain the handshake message, one-byte
+ * ChangeCipherSpec body, and two-byte alert, respectively. */
+OPENSSL_EXPORT void SSL_CTX_set_msg_callback(
+    SSL_CTX *ctx, void (*cb)(int write_p, int version, int content_type,
+                             const void *buf, size_t len, SSL *ssl, void *arg));
+
+/* SSL_CTX_set_msg_callback_arg sets the |arg| parameter of the message
+ * callback. */
+OPENSSL_EXPORT void SSL_CTX_set_msg_callback_arg(SSL_CTX *ctx, void *arg);
+
+/* SSL_set_msg_callback installs |cb| as the message callback of |ssl|. See
+ * |SSL_CTX_set_msg_callback| for when this callback is called. */
+OPENSSL_EXPORT void SSL_set_msg_callback(
+    SSL *ssl, void (*cb)(int write_p, int version, int content_type,
+                         const void *buf, size_t len, SSL *ssl, void *arg));
+
+/* SSL_set_msg_callback_arg sets the |arg| parameter of the message callback. */
+OPENSSL_EXPORT void SSL_set_msg_callback_arg(SSL *ssl, void *arg);
+
+/* SSL_CTX_set_keylog_callback configures a callback to log key material. This
+ * is intended for debugging use with tools like Wireshark. The |cb| function
+ * should log |line| followed by a newline, synchronizing with any concurrent
+ * access to the log.
+ *
+ * The format is described in
+ * https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/Key_Log_Format. */
+OPENSSL_EXPORT void SSL_CTX_set_keylog_callback(
+    SSL_CTX *ctx, void (*cb)(const SSL *ssl, const char *line));
+
+enum ssl_renegotiate_mode_t {
+  ssl_renegotiate_never = 0,
+  ssl_renegotiate_once,
+  ssl_renegotiate_freely,
+  ssl_renegotiate_ignore,
+};
+
+/* SSL_set_renegotiate_mode configures how |ssl|, a client, reacts to
+ * renegotiation attempts by a server. If |ssl| is a server, peer-initiated
+ * renegotiations are *always* rejected and this function does nothing.
+ *
+ * The renegotiation mode defaults to |ssl_renegotiate_never|, but may be set
+ * at any point in a connection's lifetime. Set it to |ssl_renegotiate_once| to
+ * allow one renegotiation, |ssl_renegotiate_freely| to allow all
+ * renegotiations or |ssl_renegotiate_ignore| to ignore HelloRequest messages.
+ * Note that ignoring HelloRequest messages may cause the connection to stall
+ * if the server waits for the renegotiation to complete.
+ *
+ * There is no support in BoringSSL for initiating renegotiations as a client
+ * or server. */
+OPENSSL_EXPORT void SSL_set_renegotiate_mode(SSL *ssl,
+                                             enum ssl_renegotiate_mode_t mode);
+
+/* SSL_renegotiate_pending returns one if |ssl| is in the middle of a
+ * renegotiation. */
+OPENSSL_EXPORT int SSL_renegotiate_pending(SSL *ssl);
+
+/* SSL_total_renegotiations returns the total number of renegotiation handshakes
+ * peformed by |ssl|. This includes the pending renegotiation, if any. */
+OPENSSL_EXPORT int SSL_total_renegotiations(const SSL *ssl);
+
+/* SSL_MAX_CERT_LIST_DEFAULT is the default maximum length, in bytes, of a peer
+ * certificate chain. */
+#define SSL_MAX_CERT_LIST_DEFAULT 1024 * 100
+
+/* SSL_CTX_get_max_cert_list returns the maximum length, in bytes, of a peer
+ * certificate chain accepted by |ctx|. */
+OPENSSL_EXPORT size_t SSL_CTX_get_max_cert_list(const SSL_CTX *ctx);
+
+/* SSL_CTX_set_max_cert_list sets the maximum length, in bytes, of a peer
+ * certificate chain to |max_cert_list|. This affects how much memory may be
+ * consumed during the handshake. */
+OPENSSL_EXPORT void SSL_CTX_set_max_cert_list(SSL_CTX *ctx,
+                                              size_t max_cert_list);
+
+/* SSL_get_max_cert_list returns the maximum length, in bytes, of a peer
+ * certificate chain accepted by |ssl|. */
+OPENSSL_EXPORT size_t SSL_get_max_cert_list(const SSL *ssl);
+
+/* SSL_set_max_cert_list sets the maximum length, in bytes, of a peer
+ * certificate chain to |max_cert_list|. This affects how much memory may be
+ * consumed during the handshake. */
+OPENSSL_EXPORT void SSL_set_max_cert_list(SSL *ssl, size_t max_cert_list);
+
+/* SSL_CTX_set_max_send_fragment sets the maximum length, in bytes, of records
+ * sent by |ctx|. Beyond this length, handshake messages and application data
+ * will be split into multiple records. */
+OPENSSL_EXPORT void SSL_CTX_set_max_send_fragment(SSL_CTX *ctx,
+                                                  size_t max_send_fragment);
+
+/* SSL_set_max_send_fragment sets the maximum length, in bytes, of records
+ * sent by |ssl|. Beyond this length, handshake messages and application data
+ * will be split into multiple records. */
+OPENSSL_EXPORT void SSL_set_max_send_fragment(SSL *ssl,
+                                              size_t max_send_fragment);
+
+/* ssl_early_callback_ctx is passed to certain callbacks that are called very
+ * early on during the server handshake. At this point, much of the SSL* hasn't
+ * been filled out and only the ClientHello can be depended on. */
+struct ssl_early_callback_ctx {
+  SSL *ssl;
+  const uint8_t *client_hello;
+  size_t client_hello_len;
+  const uint8_t *session_id;
+  size_t session_id_len;
+  const uint8_t *cipher_suites;
+  size_t cipher_suites_len;
+  const uint8_t *compression_methods;
+  size_t compression_methods_len;
+  const uint8_t *extensions;
+  size_t extensions_len;
+};
+
+/* SSL_early_callback_ctx_extension_get searches the extensions in |ctx| for an
+ * extension of the given type. If not found, it returns zero. Otherwise it
+ * sets |out_data| to point to the extension contents (not including the type
+ * and length bytes), sets |out_len| to the length of the extension contents
+ * and returns one. */
+OPENSSL_EXPORT int SSL_early_callback_ctx_extension_get(
+    const struct ssl_early_callback_ctx *ctx, uint16_t extension_type,
+    const uint8_t **out_data, size_t *out_len);
+
+/* SSL_CTX_set_select_certificate_cb sets a callback that is called before most
+ * ClientHello processing and before the decision whether to resume a session
+ * is made. The callback may inspect the ClientHello and configure the
+ * connection. It may then return one to continue the handshake or zero to
+ * pause the handshake to perform an asynchronous operation. If paused,
+ * |SSL_get_error| will return |SSL_ERROR_PENDING_CERTIFICATE|.
+ *
+ * Note: The |ssl_early_callback_ctx| is only valid for the duration of the
+ * callback and is not valid while the handshake is paused. Further, unlike with
+ * most callbacks, when the handshake loop is resumed, it will not call the
+ * callback a second time. The caller must finish reconfiguring the connection
+ * before resuming the handshake. */
+OPENSSL_EXPORT void SSL_CTX_set_select_certificate_cb(
+    SSL_CTX *ctx, int (*cb)(const struct ssl_early_callback_ctx *));
+
+/* SSL_CTX_set_dos_protection_cb sets a callback that is called once the
+ * resumption decision for a ClientHello has been made. It can return one to
+ * allow the handshake to continue or zero to cause the handshake to abort. */
+OPENSSL_EXPORT void SSL_CTX_set_dos_protection_cb(
+    SSL_CTX *ctx, int (*cb)(const struct ssl_early_callback_ctx *));
+
+/* SSL_ST_* are possible values for |SSL_state| and the bitmasks that make them
+ * up. */
+#define SSL_ST_CONNECT 0x1000
+#define SSL_ST_ACCEPT 0x2000
+#define SSL_ST_MASK 0x0FFF
+#define SSL_ST_INIT (SSL_ST_CONNECT | SSL_ST_ACCEPT)
+#define SSL_ST_OK 0x03
+#define SSL_ST_RENEGOTIATE (0x04 | SSL_ST_INIT)
+
+/* SSL_CB_* are possible values for the |type| parameter in the info
+ * callback and the bitmasks that make them up. */
+#define SSL_CB_LOOP 0x01
+#define SSL_CB_EXIT 0x02
+#define SSL_CB_READ 0x04
+#define SSL_CB_WRITE 0x08
+#define SSL_CB_ALERT 0x4000
+#define SSL_CB_READ_ALERT (SSL_CB_ALERT | SSL_CB_READ)
+#define SSL_CB_WRITE_ALERT (SSL_CB_ALERT | SSL_CB_WRITE)
+#define SSL_CB_ACCEPT_LOOP (SSL_ST_ACCEPT | SSL_CB_LOOP)
+#define SSL_CB_ACCEPT_EXIT (SSL_ST_ACCEPT | SSL_CB_EXIT)
+#define SSL_CB_CONNECT_LOOP (SSL_ST_CONNECT | SSL_CB_LOOP)
+#define SSL_CB_CONNECT_EXIT (SSL_ST_CONNECT | SSL_CB_EXIT)
+#define SSL_CB_HANDSHAKE_START 0x10
+#define SSL_CB_HANDSHAKE_DONE 0x20
+
+/* SSL_CTX_set_info_callback configures a callback to be run when various
+ * events occur during a connection's lifetime. The |type| argumentj determines
+ * the type of event and the meaning of the |value| argument. Callbacks must
+ * ignore unexpected |type| values.
+ *
+ * |SSL_CB_READ_ALERT| is signaled for each alert received, warning or fatal.
+ * The |value| argument is a 16-bit value where the alert level (either
+ * |SSL3_AL_WARNING| or |SSL3_AL_FATAL|) is in the most-significant eight bits and
+ * the alert type (one of |SSL_AD_*|) is in the least-significant eight.
+ *
+ * |SSL_CB_WRITE_ALERT| is signaled for each alert sent. The |value| argument
+ * is constructed as with |SSL_CB_READ_ALERT|.
+ *
+ * |SSL_CB_HANDSHAKE_START| is signaled when a handshake begins. The |value|
+ * argument is always one.
+ *
+ * |SSL_CB_HANDSHAKE_DONE| is signaled when a handshake completes successfully.
+ * The |value| argument is always one. If a handshake False Starts, this event
+ * may be used to determine when the Finished message is received.
+ *
+ * The following event types expose implementation details of the handshake
+ * state machine. Consuming them is deprecated.
+ *
+ * |SSL_CB_ACCEPT_LOOP| (respectively, |SSL_CB_CONNECT_LOOP|) is signaled when
+ * a server (respectively, client) handshake progresses. The |value| argument
+ * is always one. For the duration of the callback, |SSL_state| will return the
+ * previous state.
+ *
+ * |SSL_CB_ACCEPT_EXIT| (respectively, |SSL_CB_CONNECT_EXIT|) is signaled when
+ * a server (respectively, client) handshake completes, fails, or is paused.
+ * The |value| argument is one if the handshake succeeded and <= 0
+ * otherwise. */
+OPENSSL_EXPORT void SSL_CTX_set_info_callback(
+    SSL_CTX *ctx, void (*cb)(const SSL *ssl, int type, int value));
+
+/* SSL_CTX_get_info_callback returns the callback set by
+ * |SSL_CTX_set_info_callback|. */
+OPENSSL_EXPORT void (*SSL_CTX_get_info_callback(SSL_CTX *ctx))(const SSL *ssl,
+                                                               int type,
+                                                               int value);
+
+/* SSL_set_info_callback configures a callback to be run at various events
+ * during a connection's lifetime. See |SSL_CTX_set_info_callback|. */
+OPENSSL_EXPORT void SSL_set_info_callback(
+    SSL *ssl, void (*cb)(const SSL *ssl, int type, int value));
+
+/* SSL_get_info_callback returns the callback set by |SSL_set_info_callback|. */
+OPENSSL_EXPORT void (*SSL_get_info_callback(const SSL *ssl))(const SSL *ssl,
+                                                             int type,
+                                                             int value);
+
+/* SSL_state_string_long returns the current state of the handshake state
+ * machine as a string. This may be useful for debugging and logging. */
+OPENSSL_EXPORT const char *SSL_state_string_long(const SSL *ssl);
+
+/* SSL_set_SSL_CTX partially changes |ssl|'s |SSL_CTX|. |ssl| will use the
+ * certificate and session_id_context from |ctx|, and |SSL_get_SSL_CTX| will
+ * report |ctx|. However most settings and the session cache itself will
+ * continue to use the initial |SSL_CTX|. It is often used as part of SNI.
+ *
+ * TODO(davidben): Make a better story here and get rid of this API. Also
+ * determine if there's anything else affected by |SSL_set_SSL_CTX| that
+ * matters. Not as many values are affected as one might initially think. The
+ * session cache explicitly selects the initial |SSL_CTX|. Most settings are
+ * copied at |SSL_new| so |ctx|'s versions don't apply. This, notably, has some
+ * consequences for any plans to make |SSL| copy-on-write most of its
+ * configuration. */
+OPENSSL_EXPORT SSL_CTX *SSL_set_SSL_CTX(SSL *ssl, SSL_CTX *ctx);
+
+#define SSL_SENT_SHUTDOWN 1
+#define SSL_RECEIVED_SHUTDOWN 2
+
+/* SSL_get_shutdown returns a bitmask with a subset of |SSL_SENT_SHUTDOWN| and
+ * |SSL_RECEIVED_SHUTDOWN| to query whether close_notify was sent or received,
+ * respectively. */
+OPENSSL_EXPORT int SSL_get_shutdown(const SSL *ssl);
+
+/* SSL_get_server_key_exchange_hash, on a client, returns the hash the server
+ * used to sign the ServerKeyExchange in TLS 1.2. If not applicable, it returns
+ * |TLSEXT_hash_none|. */
+OPENSSL_EXPORT uint8_t SSL_get_server_key_exchange_hash(const SSL *ssl);
+
+
+/* Deprecated functions. */
+
+/* SSL_library_init calls |CRYPTO_library_init| and returns one. */
+OPENSSL_EXPORT int SSL_library_init(void);
+
+/* SSL_set_reject_peer_renegotiations calls |SSL_set_renegotiate_mode| with
+ * |ssl_never_renegotiate| if |reject| is one and |ssl_renegotiate_freely| if
+ * zero. */
+OPENSSL_EXPORT void SSL_set_reject_peer_renegotiations(SSL *ssl, int reject);
+
+/* SSL_CIPHER_description writes a description of |cipher| into |buf| and
+ * returns |buf|. If |buf| is NULL, it returns a newly allocated string, to be
+ * freed with |OPENSSL_free|, or NULL on error.
+ *
+ * The description includes a trailing newline and has the form:
+ * AES128-SHA              Kx=RSA      Au=RSA  Enc=AES(128)  Mac=SHA1
+ *
+ * Consider |SSL_CIPHER_get_name| or |SSL_CIPHER_get_rfc_name| instead. */
+OPENSSL_EXPORT const char *SSL_CIPHER_description(const SSL_CIPHER *cipher,
+                                                  char *buf, int len);
+
+/* SSL_CIPHER_get_version returns the string "TLSv1/SSLv3". */
+OPENSSL_EXPORT const char *SSL_CIPHER_get_version(const SSL_CIPHER *cipher);
+
+typedef void COMP_METHOD;
+
+/* SSL_COMP_get_compression_methods returns NULL. */
+OPENSSL_EXPORT COMP_METHOD *SSL_COMP_get_compression_methods(void);
+
+/* SSL_COMP_add_compression_method returns one. */
+OPENSSL_EXPORT int SSL_COMP_add_compression_method(int id, COMP_METHOD *cm);
+
+/* SSL_COMP_get_name returns NULL. */
+OPENSSL_EXPORT const char *SSL_COMP_get_name(const COMP_METHOD *comp);
+
+/* SSLv23_method calls |TLS_method|. */
+OPENSSL_EXPORT const SSL_METHOD *SSLv23_method(void);
+
+/* These version-specific methods behave exactly like |TLS_method| and
+ * |DTLS_method| except they also call |SSL_CTX_set_min_version| and
+ * |SSL_CTX_set_max_version| to lock connections to that protocol version. */
+OPENSSL_EXPORT const SSL_METHOD *SSLv3_method(void);
+OPENSSL_EXPORT const SSL_METHOD *TLSv1_method(void);
+OPENSSL_EXPORT const SSL_METHOD *TLSv1_1_method(void);
+OPENSSL_EXPORT const SSL_METHOD *TLSv1_2_method(void);
+OPENSSL_EXPORT const SSL_METHOD *DTLSv1_method(void);
+OPENSSL_EXPORT const SSL_METHOD *DTLSv1_2_method(void);
+
+/* These client- and server-specific methods call their corresponding generic
+ * methods. */
+OPENSSL_EXPORT const SSL_METHOD *SSLv23_server_method(void);
+OPENSSL_EXPORT const SSL_METHOD *SSLv23_client_method(void);
+OPENSSL_EXPORT const SSL_METHOD *SSLv3_server_method(void);
+OPENSSL_EXPORT const SSL_METHOD *SSLv3_client_method(void);
+OPENSSL_EXPORT const SSL_METHOD *TLSv1_server_method(void);
+OPENSSL_EXPORT const SSL_METHOD *TLSv1_client_method(void);
+OPENSSL_EXPORT const SSL_METHOD *TLSv1_1_server_method(void);
+OPENSSL_EXPORT const SSL_METHOD *TLSv1_1_client_method(void);
+OPENSSL_EXPORT const SSL_METHOD *TLSv1_2_server_method(void);
+OPENSSL_EXPORT const SSL_METHOD *TLSv1_2_client_method(void);
+OPENSSL_EXPORT const SSL_METHOD *DTLS_server_method(void);
+OPENSSL_EXPORT const SSL_METHOD *DTLS_client_method(void);
+OPENSSL_EXPORT const SSL_METHOD *DTLSv1_server_method(void);
+OPENSSL_EXPORT const SSL_METHOD *DTLSv1_client_method(void);
+OPENSSL_EXPORT const SSL_METHOD *DTLSv1_2_server_method(void);
+OPENSSL_EXPORT const SSL_METHOD *DTLSv1_2_client_method(void);
+
+/* SSL_clear resets |ssl| to allow another connection and returns one on success
+ * or zero on failure. It returns most configuration state but releases memory
+ * associated with the current connection.
+ *
+ * Free |ssl| and create a new one instead. */
+OPENSSL_EXPORT int SSL_clear(SSL *ssl);
+
+/* SSL_CTX_set_tmp_rsa_callback does nothing. */
+OPENSSL_EXPORT void SSL_CTX_set_tmp_rsa_callback(
+    SSL_CTX *ctx, RSA *(*cb)(SSL *ssl, int is_export, int keylength));
+
+/* SSL_set_tmp_rsa_callback does nothing. */
+OPENSSL_EXPORT void SSL_set_tmp_rsa_callback(SSL *ssl,
+                                             RSA *(*cb)(SSL *ssl, int is_export,
+                                                        int keylength));
+
+/* SSL_CTX_sess_connect returns zero. */
+OPENSSL_EXPORT int SSL_CTX_sess_connect(const SSL_CTX *ctx);
+
+/* SSL_CTX_sess_connect_good returns zero. */
+OPENSSL_EXPORT int SSL_CTX_sess_connect_good(const SSL_CTX *ctx);
+
+/* SSL_CTX_sess_connect_renegotiate returns zero. */
+OPENSSL_EXPORT int SSL_CTX_sess_connect_renegotiate(const SSL_CTX *ctx);
+
+/* SSL_CTX_sess_accept returns zero. */
+OPENSSL_EXPORT int SSL_CTX_sess_accept(const SSL_CTX *ctx);
+
+/* SSL_CTX_sess_accept_renegotiate returns zero. */
+OPENSSL_EXPORT int SSL_CTX_sess_accept_renegotiate(const SSL_CTX *ctx);
+
+/* SSL_CTX_sess_accept_good returns zero. */
+OPENSSL_EXPORT int SSL_CTX_sess_accept_good(const SSL_CTX *ctx);
+
+/* SSL_CTX_sess_hits returns zero. */
+OPENSSL_EXPORT int SSL_CTX_sess_hits(const SSL_CTX *ctx);
+
+/* SSL_CTX_sess_cb_hits returns zero. */
+OPENSSL_EXPORT int SSL_CTX_sess_cb_hits(const SSL_CTX *ctx);
+
+/* SSL_CTX_sess_misses returns zero. */
+OPENSSL_EXPORT int SSL_CTX_sess_misses(const SSL_CTX *ctx);
+
+/* SSL_CTX_sess_timeouts returns zero. */
+OPENSSL_EXPORT int SSL_CTX_sess_timeouts(const SSL_CTX *ctx);
+
+/* SSL_CTX_sess_cache_full returns zero. */
+OPENSSL_EXPORT int SSL_CTX_sess_cache_full(const SSL_CTX *ctx);
+
+/* SSL_cutthrough_complete calls |SSL_in_false_start|. */
+OPENSSL_EXPORT int SSL_cutthrough_complete(const SSL *s);
+
+/* SSL_num_renegotiations calls |SSL_total_renegotiations|. */
+OPENSSL_EXPORT int SSL_num_renegotiations(const SSL *ssl);
+
+/* SSL_CTX_need_tmp_RSA returns zero. */
+OPENSSL_EXPORT int SSL_CTX_need_tmp_RSA(const SSL_CTX *ctx);
+
+/* SSL_need_tmp_RSA returns zero. */
+OPENSSL_EXPORT int SSL_need_tmp_RSA(const SSL *ssl);
+
+/* SSL_CTX_set_tmp_rsa returns one. */
+OPENSSL_EXPORT int SSL_CTX_set_tmp_rsa(SSL_CTX *ctx, const RSA *rsa);
+
+/* SSL_set_tmp_rsa returns one. */
+OPENSSL_EXPORT int SSL_set_tmp_rsa(SSL *ssl, const RSA *rsa);
+
+/* SSL_CTX_get_read_ahead returns zero. */
+OPENSSL_EXPORT int SSL_CTX_get_read_ahead(const SSL_CTX *ctx);
+
+/* SSL_CTX_set_read_ahead does nothing. */
+OPENSSL_EXPORT void SSL_CTX_set_read_ahead(SSL_CTX *ctx, int yes);
+
+/* SSL_get_read_ahead returns zero. */
+OPENSSL_EXPORT int SSL_get_read_ahead(const SSL *s);
+
+/* SSL_set_read_ahead does nothing. */
+OPENSSL_EXPORT void SSL_set_read_ahead(SSL *s, int yes);
+
+/* SSL_renegotiate put an error on the error queue and returns zero. */
+OPENSSL_EXPORT int SSL_renegotiate(SSL *ssl);
+
+/* SSL_set_state does nothing. */
+OPENSSL_EXPORT void SSL_set_state(SSL *ssl, int state);
+
+/* SSL_MODE_HANDSHAKE_CUTTHROUGH is the same as SSL_MODE_ENABLE_FALSE_START. */
+#define SSL_MODE_HANDSHAKE_CUTTHROUGH SSL_MODE_ENABLE_FALSE_START
+
+/* i2d_SSL_SESSION serializes |in| to the bytes pointed to by |*pp|. On success,
+ * it returns the number of bytes written and advances |*pp| by that many bytes.
+ * On failure, it returns -1. If |pp| is NULL, no bytes are written and only the
+ * length is returned.
+ *
+ * Use |SSL_SESSION_to_bytes| instead. */
+OPENSSL_EXPORT int i2d_SSL_SESSION(SSL_SESSION *in, uint8_t **pp);
+
+/* d2i_SSL_SESSION parses a serialized session from the |length| bytes pointed
+ * to by |*pp|. It returns the new |SSL_SESSION| and advances |*pp| by the
+ * number of bytes consumed on success and NULL on failure. The caller takes
+ * ownership of the new session and must call |SSL_SESSION_free| when done.
+ *
+ * If |a| is non-NULL, |*a| is released and set the new |SSL_SESSION|.
+ *
+ * Use |SSL_SESSION_from_bytes| instead. */
+OPENSSL_EXPORT SSL_SESSION *d2i_SSL_SESSION(SSL_SESSION **a, const uint8_t **pp,
+                                            long length);
+
+/* i2d_SSL_SESSION_bio serializes |session| and writes the result to |bio|. It
+ * returns the number of bytes written on success and <= 0 on error. */
+OPENSSL_EXPORT int i2d_SSL_SESSION_bio(BIO *bio, const SSL_SESSION *session);
+
+/* d2i_SSL_SESSION_bio reads a serialized |SSL_SESSION| from |bio| and returns a
+ * newly-allocated |SSL_SESSION| or NULL on error. If |out| is not NULL, it also
+ * frees |*out| and sets |*out| to the new |SSL_SESSION|.  */
+OPENSSL_EXPORT SSL_SESSION *d2i_SSL_SESSION_bio(BIO *bio, SSL_SESSION **out);
+
+/* ERR_load_SSL_strings does nothing. */
+OPENSSL_EXPORT void ERR_load_SSL_strings(void);
+
+/* SSL_load_error_strings does nothing. */
+OPENSSL_EXPORT void SSL_load_error_strings(void);
+
+/* SSL_CTX_set_tlsext_use_srtp calls |SSL_CTX_set_srtp_profiles|. It returns
+ * zero on success and one on failure.
+ *
+ * WARNING: this function is dangerous because it breaks the usual return value
+ * convention. Use |SSL_CTX_set_srtp_profiles| instead. */
+OPENSSL_EXPORT int SSL_CTX_set_tlsext_use_srtp(SSL_CTX *ctx,
+                                               const char *profiles);
+
+/* SSL_set_tlsext_use_srtp calls |SSL_set_srtp_profiles|. It returns zero on
+ * success and one on failure.
+ *
+ * WARNING: this function is dangerous because it breaks the usual return value
+ * convention. Use |SSL_set_srtp_profiles| instead. */
+OPENSSL_EXPORT int SSL_set_tlsext_use_srtp(SSL *ssl, const char *profiles);
+
+/* SSL_get_current_compression returns NULL. */
+OPENSSL_EXPORT const COMP_METHOD *SSL_get_current_compression(SSL *s);
+
+/* SSL_get_current_expansion returns NULL. */
+OPENSSL_EXPORT const COMP_METHOD *SSL_get_current_expansion(SSL *s);
+
+#define SSL_set_app_data(s, arg) (SSL_set_ex_data(s, 0, (char *)arg))
+#define SSL_get_app_data(s) (SSL_get_ex_data(s, 0))
+#define SSL_SESSION_set_app_data(s, a) \
+  (SSL_SESSION_set_ex_data(s, 0, (char *)a))
+#define SSL_SESSION_get_app_data(s) (SSL_SESSION_get_ex_data(s, 0))
+#define SSL_CTX_get_app_data(ctx) (SSL_CTX_get_ex_data(ctx, 0))
+#define SSL_CTX_set_app_data(ctx, arg) \
+  (SSL_CTX_set_ex_data(ctx, 0, (char *)arg))
+
+#define OpenSSL_add_ssl_algorithms() SSL_library_init()
+#define SSLeay_add_ssl_algorithms() SSL_library_init()
+
+#define SSL_get_cipher(ssl) SSL_CIPHER_get_name(SSL_get_current_cipher(ssl))
+#define SSL_get_cipher_bits(ssl, out_alg_bits) \
+	  SSL_CIPHER_get_bits(SSL_get_current_cipher(ssl), out_alg_bits)
+#define SSL_get_cipher_version(ssl) \
+	  SSL_CIPHER_get_version(SSL_get_current_cipher(ssl))
+#define SSL_get_cipher_name(ssl) \
+	  SSL_CIPHER_get_name(SSL_get_current_cipher(ssl))
+#define SSL_get_time(session) SSL_SESSION_get_time(session)
+#define SSL_set_time(session, time) SSL_SESSION_set_time((session), (time))
+#define SSL_get_timeout(session) SSL_SESSION_get_timeout(session)
+#define SSL_set_timeout(session, timeout) \
+		SSL_SESSION_set_timeout((session), (timeout))
+
+typedef struct ssl_comp_st SSL_COMP;
+
+struct ssl_comp_st {
+  int id;
+  const char *name;
+  char *method;
+};
+
+DECLARE_STACK_OF(SSL_COMP)
+
+/* The following flags toggle individual protocol versions. This is deprecated.
+ * Use |SSL_CTX_set_min_version| and |SSL_CTX_set_max_version| instead. */
+#define SSL_OP_NO_SSLv3 0x02000000L
+#define SSL_OP_NO_TLSv1 0x04000000L
+#define SSL_OP_NO_TLSv1_2 0x08000000L
+#define SSL_OP_NO_TLSv1_1 0x10000000L
+#define SSL_OP_NO_DTLSv1 SSL_OP_NO_TLSv1
+#define SSL_OP_NO_DTLSv1_2 SSL_OP_NO_TLSv1_2
+
+/* The following flags do nothing and are included only to make it easier to
+ * compile code with BoringSSL. */
+#define SSL_MODE_AUTO_RETRY 0
+#define SSL_MODE_RELEASE_BUFFERS 0
+#define SSL_MODE_SEND_CLIENTHELLO_TIME 0
+#define SSL_MODE_SEND_SERVERHELLO_TIME 0
+#define SSL_OP_ALL 0
+#define SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION 0
+#define SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS 0
+#define SSL_OP_EPHEMERAL_RSA 0
+#define SSL_OP_LEGACY_SERVER_CONNECT 0
+#define SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER 0
+#define SSL_OP_MICROSOFT_SESS_ID_BUG 0
+#define SSL_OP_MSIE_SSLV2_RSA_PADDING 0
+#define SSL_OP_NETSCAPE_CA_DN_BUG 0
+#define SSL_OP_NETSCAPE_CHALLENGE_BUG 0
+#define SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG 0
+#define SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG 0
+#define SSL_OP_NO_COMPRESSION 0
+#define SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION 0
+#define SSL_OP_NO_SSLv2 0
+#define SSL_OP_PKCS1_CHECK_1 0
+#define SSL_OP_PKCS1_CHECK_2 0
+#define SSL_OP_SINGLE_DH_USE 0
+#define SSL_OP_SINGLE_ECDH_USE 0
+#define SSL_OP_SSLEAY_080_CLIENT_DH_BUG 0
+#define SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG 0
+#define SSL_OP_TLS_BLOCK_PADDING_BUG 0
+#define SSL_OP_TLS_D5_BUG 0
+#define SSL_OP_TLS_ROLLBACK_BUG 0
+#define SSL_VERIFY_CLIENT_ONCE 0
+
+/* SSL_cache_hit calls |SSL_session_resumed|. */
+OPENSSL_EXPORT int SSL_cache_hit(SSL *ssl);
+
+/* SSL_get_default_timeout returns |SSL_DEFAULT_SESSION_TIMEOUT|. */
+OPENSSL_EXPORT long SSL_get_default_timeout(const SSL *ssl);
+
+/* SSL_get_version returns a string describing the TLS version used by |ssl|.
+ * For example, "TLSv1.2" or "SSLv3". */
+OPENSSL_EXPORT const char *SSL_get_version(const SSL *ssl);
+
+/* SSL_get_cipher_list returns the name of the |n|th cipher in the output of
+ * |SSL_get_ciphers| or NULL if out of range. Use |SSL_get_ciphers| insteads. */
+OPENSSL_EXPORT const char *SSL_get_cipher_list(const SSL *ssl, int n);
+
+/* SSL_CTX_set_client_cert_cb sets a callback which is called on the client if
+ * the server requests a client certificate and none is configured. On success,
+ * the callback should return one and set |*out_x509| to |*out_pkey| to a leaf
+ * certificate and private key, respectively, passing ownership. It should
+ * return zero to send no certificate and -1 to fail or pause the handshake. If
+ * the handshake is paused, |SSL_get_error| will return
+ * |SSL_ERROR_WANT_X509_LOOKUP|.
+ *
+ * The callback may call |SSL_get0_certificate_types| and
+ * |SSL_get_client_CA_list| for information on the server's certificate request.
+ *
+ * Use |SSL_CTX_set_cert_cb| instead. Configuring intermediate certificates with
+ * this function is confusing. */
+OPENSSL_EXPORT void SSL_CTX_set_client_cert_cb(
+    SSL_CTX *ctx,
+    int (*client_cert_cb)(SSL *ssl, X509 **out_x509, EVP_PKEY **out_pkey));
+
+/* SSL_CTX_get_client_cert_cb returns the callback set by
+ * |SSL_CTX_set_client_cert_cb|. */
+OPENSSL_EXPORT int (*SSL_CTX_get_client_cert_cb(SSL_CTX *ctx))(
+      SSL *ssl, X509 **out_x509, EVP_PKEY **out_pkey);
+
+#define SSL_NOTHING 1
+#define SSL_WRITING 2
+#define SSL_READING 3
+#define SSL_X509_LOOKUP 4
+#define SSL_CHANNEL_ID_LOOKUP 5
+#define SSL_PENDING_SESSION 7
+#define SSL_CERTIFICATE_SELECTION_PENDING 8
+#define SSL_PRIVATE_KEY_OPERATION 9
+
+/* SSL_want returns one of the above values to determine what the most recent
+ * operation on |ssl| was blocked on. Use |SSL_get_error| instead. */
+OPENSSL_EXPORT int SSL_want(const SSL *ssl);
+
+#define SSL_want_nothing(ssl) (SSL_want(ssl) == SSL_NOTHING)
+#define SSL_want_read(ssl) (SSL_want(ssl) == SSL_READING)
+#define SSL_want_write(ssl) (SSL_want(ssl) == SSL_WRITING)
+#define SSL_want_x509_lookup(ssl) (SSL_want(ssl) == SSL_X509_LOOKUP)
+#define SSL_want_channel_id_lookup(ssl) (SSL_want(ssl) == SSL_CHANNEL_ID_LOOKUP)
+#define SSL_want_session(ssl) (SSL_want(ssl) == SSL_PENDING_SESSION)
+#define SSL_want_certificate(ssl) \
+  (SSL_want(ssl) == SSL_CERTIFICATE_SELECTION_PENDING)
+#define SSL_want_private_key_operation(ssl) \
+  (SSL_want(ssl) == SSL_PRIVATE_KEY_OPERATION)
+
+ /* SSL_get_finished writes up to |count| bytes of the Finished message sent by
+  * |ssl| to |buf|. It returns the total untruncated length or zero if none has
+  * been sent yet.
+  *
+  * Use |SSL_get_tls_unique| instead. */
+OPENSSL_EXPORT size_t SSL_get_finished(const SSL *ssl, void *buf, size_t count);
+
+ /* SSL_get_peer_finished writes up to |count| bytes of the Finished message
+  * received from |ssl|'s peer to |buf|. It returns the total untruncated length
+  * or zero if none has been received yet.
+  *
+  * Use |SSL_get_tls_unique| instead. */
+OPENSSL_EXPORT size_t SSL_get_peer_finished(const SSL *ssl, void *buf,
+                                            size_t count);
+
+/* SSL_alert_type_string returns "!". Use |SSL_alert_type_string_long|
+ * instead. */
+OPENSSL_EXPORT const char *SSL_alert_type_string(int value);
+
+/* SSL_alert_desc_string returns "!!". Use |SSL_alert_desc_string_long|
+ * instead. */
+OPENSSL_EXPORT const char *SSL_alert_desc_string(int value);
+
+/* SSL_TXT_* expand to strings. */
+#define SSL_TXT_MEDIUM "MEDIUM"
+#define SSL_TXT_HIGH "HIGH"
+#define SSL_TXT_FIPS "FIPS"
+#define SSL_TXT_kRSA "kRSA"
+#define SSL_TXT_kDHE "kDHE"
+#define SSL_TXT_kEDH "kEDH"
+#define SSL_TXT_kECDHE "kECDHE"
+#define SSL_TXT_kEECDH "kEECDH"
+#define SSL_TXT_kPSK "kPSK"
+#define SSL_TXT_aRSA "aRSA"
+#define SSL_TXT_aECDSA "aECDSA"
+#define SSL_TXT_aPSK "aPSK"
+#define SSL_TXT_DH "DH"
+#define SSL_TXT_DHE "DHE"
+#define SSL_TXT_EDH "EDH"
+#define SSL_TXT_RSA "RSA"
+#define SSL_TXT_ECDH "ECDH"
+#define SSL_TXT_ECDHE "ECDHE"
+#define SSL_TXT_EECDH "EECDH"
+#define SSL_TXT_ECDSA "ECDSA"
+#define SSL_TXT_PSK "PSK"
+#define SSL_TXT_3DES "3DES"
+#define SSL_TXT_RC4 "RC4"
+#define SSL_TXT_AES128 "AES128"
+#define SSL_TXT_AES256 "AES256"
+#define SSL_TXT_AES "AES"
+#define SSL_TXT_AES_GCM "AESGCM"
+#define SSL_TXT_CHACHA20 "CHACHA20"
+#define SSL_TXT_MD5 "MD5"
+#define SSL_TXT_SHA1 "SHA1"
+#define SSL_TXT_SHA "SHA"
+#define SSL_TXT_SHA256 "SHA256"
+#define SSL_TXT_SHA384 "SHA384"
+#define SSL_TXT_SSLV3 "SSLv3"
+#define SSL_TXT_TLSV1 "TLSv1"
+#define SSL_TXT_TLSV1_1 "TLSv1.1"
+#define SSL_TXT_TLSV1_2 "TLSv1.2"
+#define SSL_TXT_ALL "ALL"
+#define SSL_TXT_CMPDEF "COMPLEMENTOFDEFAULT"
+
+typedef struct ssl_conf_ctx_st SSL_CONF_CTX;
+
+/* SSL_state returns the current state of the handshake state machine. */
+OPENSSL_EXPORT int SSL_state(const SSL *ssl);
+
+#define SSL_get_state(ssl) SSL_state(ssl)
+
+/* SSL_state_string returns the current state of the handshake state machine as
+ * a six-letter string. Use |SSL_state_string_long| for a more intelligible
+ * string. */
+OPENSSL_EXPORT const char *SSL_state_string(const SSL *ssl);
+
+/* SSL_set_shutdown causes |ssl| to behave as if the shutdown bitmask (see
+ * |SSL_get_shutdown|) were |mode|. This may be used to skip sending or
+ * receiving close_notify in |SSL_shutdown| by causing the implementation to
+ * believe the events already happened.
+ *
+ * It is an error to use |SSL_set_shutdown| to unset a bit that has already been
+ * set. Doing so will trigger an |assert| in debug builds and otherwise be
+ * ignored.
+ *
+ * Use |SSL_CTX_set_quiet_shutdown| instead. */
+OPENSSL_EXPORT void SSL_set_shutdown(SSL *ssl, int mode);
+
+/* SSL_CTX_set_tmp_ecdh calls |SSL_CTX_set1_curves| with a one-element list
+ * containing |ec_key|'s curve. */
+OPENSSL_EXPORT int SSL_CTX_set_tmp_ecdh(SSL_CTX *ctx, const EC_KEY *ec_key);
+
+/* SSL_set_tmp_ecdh calls |SSL_set1_curves| with a one-element list containing
+ * |ec_key|'s curve. */
+OPENSSL_EXPORT int SSL_set_tmp_ecdh(SSL *ssl, const EC_KEY *ec_key);
+
+
+/* Private structures.
+ *
+ * This structures are exposed for historical reasons, but access to them is
+ * deprecated. */
+
+typedef struct ssl_protocol_method_st SSL_PROTOCOL_METHOD;
+typedef struct ssl3_enc_method SSL3_ENC_METHOD;
+typedef struct ssl_aead_ctx_st SSL_AEAD_CTX;
+
+struct ssl_cipher_st {
+  /* name is the OpenSSL name for the cipher. */
+  const char *name;
+  /* id is the cipher suite value bitwise OR-d with 0x03000000. */
+  uint32_t id;
+
+  /* algorithm_* are internal fields. See ssl/internal.h for their values. */
+  uint32_t algorithm_mkey;
+  uint32_t algorithm_auth;
+  uint32_t algorithm_enc;
+  uint32_t algorithm_mac;
+  uint32_t algorithm_prf;
+};
+
+#define SSL_MAX_SSL_SESSION_ID_LENGTH 32
+#define SSL_MAX_SID_CTX_LENGTH 32
+#define SSL_MAX_MASTER_KEY_LENGTH 48
+
+struct ssl_session_st {
+  CRYPTO_refcount_t references;
+  int ssl_version; /* what ssl version session info is being kept in here? */
+
+  /* key_exchange_info contains an indication of the size of the asymmetric
+   * primitive used in the handshake that created this session. In the event
+   * that two asymmetric operations are used, this value applies to the one
+   * that controls the confidentiality of the connection. Its interpretation
+   * depends on the primitive that was used; as specified by the cipher suite:
+   *   DHE: the size, in bits, of the multiplicative group.
+   *   RSA: the size, in bits, of the modulus.
+   *   ECDHE: the TLS id for the curve.
+   *
+   * A zero indicates that the value is unknown. */
+  uint32_t key_exchange_info;
+
+  int master_key_length;
+  uint8_t master_key[SSL_MAX_MASTER_KEY_LENGTH];
+
+  /* session_id - valid? */
+  unsigned int session_id_length;
+  uint8_t session_id[SSL_MAX_SSL_SESSION_ID_LENGTH];
+  /* this is used to determine whether the session is being reused in
+   * the appropriate context. It is up to the application to set this,
+   * via SSL_new */
+  unsigned int sid_ctx_length;
+  uint8_t sid_ctx[SSL_MAX_SID_CTX_LENGTH];
+
+  char *psk_identity;
+  /* peer is the peer's certificate. */
+  X509 *peer;
+
+  /* cert_chain is the certificate chain sent by the peer. NOTE: for historical
+   * reasons, when a client (so the peer is a server), the chain includes
+   * |peer|, but when a server it does not. */
+  STACK_OF(X509) *cert_chain;
+
+  /* when app_verify_callback accepts a session where the peer's certificate is
+   * not ok, we must remember the error for session reuse: */
+  long verify_result; /* only for servers */
+
+  long timeout;
+  long time;
+
+  const SSL_CIPHER *cipher;
+
+  CRYPTO_EX_DATA ex_data; /* application specific data */
+
+  /* These are used to make removal of session-ids more efficient and to
+   * implement a maximum cache size. */
+  SSL_SESSION *prev, *next;
+  char *tlsext_hostname;
+
+  /* RFC4507 info */
+  uint8_t *tlsext_tick;               /* Session ticket */
+  size_t tlsext_ticklen;              /* Session ticket length */
+
+  size_t tlsext_signed_cert_timestamp_list_length;
+  uint8_t *tlsext_signed_cert_timestamp_list; /* Server's list. */
+
+  /* The OCSP response that came with the session. */
+  size_t ocsp_response_length;
+  uint8_t *ocsp_response;
+
+  /* peer_sha256 contains the SHA-256 hash of the peer's certificate if
+   * |peer_sha256_valid| is true. */
+  uint8_t peer_sha256[SHA256_DIGEST_LENGTH];
+
+  /* original_handshake_hash contains the handshake hash (either SHA-1+MD5 or
+   * SHA-2, depending on TLS version) for the original, full handshake that
+   * created a session. This is used by Channel IDs during resumption. */
+  uint8_t original_handshake_hash[EVP_MAX_MD_SIZE];
+  unsigned original_handshake_hash_len;
+
+  uint32_t tlsext_tick_lifetime_hint; /* Session lifetime hint in seconds */
+
+  /* extended_master_secret is true if the master secret in this session was
+   * generated using EMS and thus isn't vulnerable to the Triple Handshake
+   * attack. */
+  unsigned extended_master_secret:1;
+
+  /* peer_sha256_valid is non-zero if |peer_sha256| is valid. */
+  unsigned peer_sha256_valid:1; /* Non-zero if peer_sha256 is valid */
+
+  /* not_resumable is used to indicate that session resumption is not allowed.
+   * Applications can also set this bit for a new session via
+   * not_resumable_session_cb to disable session caching and tickets. */
+  unsigned not_resumable:1;
+};
+
+/* ssl_cipher_preference_list_st contains a list of SSL_CIPHERs with
+ * equal-preference groups. For TLS clients, the groups are moot because the
+ * server picks the cipher and groups cannot be expressed on the wire. However,
+ * for servers, the equal-preference groups allow the client's preferences to
+ * be partially respected. (This only has an effect with
+ * SSL_OP_CIPHER_SERVER_PREFERENCE).
+ *
+ * The equal-preference groups are expressed by grouping SSL_CIPHERs together.
+ * All elements of a group have the same priority: no ordering is expressed
+ * within a group.
+ *
+ * The values in |ciphers| are in one-to-one correspondence with
+ * |in_group_flags|. (That is, sk_SSL_CIPHER_num(ciphers) is the number of
+ * bytes in |in_group_flags|.) The bytes in |in_group_flags| are either 1, to
+ * indicate that the corresponding SSL_CIPHER is not the last element of a
+ * group, or 0 to indicate that it is.
+ *
+ * For example, if |in_group_flags| contains all zeros then that indicates a
+ * traditional, fully-ordered preference. Every SSL_CIPHER is the last element
+ * of the group (i.e. they are all in a one-element group).
+ *
+ * For a more complex example, consider:
+ *   ciphers:        A  B  C  D  E  F
+ *   in_group_flags: 1  1  0  0  1  0
+ *
+ * That would express the following, order:
+ *
+ *    A         E
+ *    B -> D -> F
+ *    C
+ */
+struct ssl_cipher_preference_list_st {
+  STACK_OF(SSL_CIPHER) *ciphers;
+  uint8_t *in_group_flags;
+};
+
+struct ssl_ctx_st {
+  const SSL_PROTOCOL_METHOD *method;
+
+  /* lock is used to protect various operations on this object. */
+  CRYPTO_MUTEX lock;
+
+  /* max_version is the maximum acceptable protocol version. If zero, the
+   * maximum supported version, currently (D)TLS 1.2, is used. */
+  uint16_t max_version;
+
+  /* min_version is the minimum acceptable protocl version. If zero, the
+   * minimum supported version, currently SSL 3.0 and DTLS 1.0, is used */
+  uint16_t min_version;
+
+  struct ssl_cipher_preference_list_st *cipher_list;
+  /* same as above but sorted for lookup */
+  STACK_OF(SSL_CIPHER) *cipher_list_by_id;
+
+  /* cipher_list_tls10 is the list of ciphers when TLS 1.0 or greater is in
+   * use. This only applies to server connections as, for clients, the version
+   * number is known at connect time and so the cipher list can be set then. If
+   * |cipher_list_tls11| is non-NULL then this applies only to TLS 1.0
+   * connections.
+   *
+   * TODO(agl): this exists to assist in the death of SSLv3. It can hopefully
+   * be removed after that. */
+  struct ssl_cipher_preference_list_st *cipher_list_tls10;
+
+  /* cipher_list_tls11 is the list of ciphers when TLS 1.1 or greater is in
+   * use. This only applies to server connections as, for clients, the version
+   * number is known at connect time and so the cipher list can be set then. */
+  struct ssl_cipher_preference_list_st *cipher_list_tls11;
+
+  X509_STORE *cert_store;
+  LHASH_OF(SSL_SESSION) *sessions;
+  /* Most session-ids that will be cached, default is
+   * SSL_SESSION_CACHE_MAX_SIZE_DEFAULT. 0 is unlimited. */
+  unsigned long session_cache_size;
+  SSL_SESSION *session_cache_head;
+  SSL_SESSION *session_cache_tail;
+
+  /* handshakes_since_cache_flush is the number of successful handshakes since
+   * the last cache flush. */
+  int handshakes_since_cache_flush;
+
+  /* This can have one of 2 values, ored together,
+   * SSL_SESS_CACHE_CLIENT,
+   * SSL_SESS_CACHE_SERVER,
+   * Default is SSL_SESSION_CACHE_SERVER, which means only
+   * SSL_accept which cache SSL_SESSIONS. */
+  int session_cache_mode;
+
+  /* If timeout is not 0, it is the default timeout value set when SSL_new() is
+   * called.  This has been put in to make life easier to set things up */
+  long session_timeout;
+
+  /* If this callback is not null, it will be called each time a session id is
+   * added to the cache.  If this function returns 1, it means that the
+   * callback will do a SSL_SESSION_free() when it has finished using it.
+   * Otherwise, on 0, it means the callback has finished with it. If
+   * remove_session_cb is not null, it will be called when a session-id is
+   * removed from the cache.  After the call, OpenSSL will SSL_SESSION_free()
+   * it. */
+  int (*new_session_cb)(SSL *ssl, SSL_SESSION *sess);
+  void (*remove_session_cb)(SSL_CTX *ctx, SSL_SESSION *sess);
+  SSL_SESSION *(*get_session_cb)(SSL *ssl, uint8_t *data, int len,
+                                 int *copy);
+
+  CRYPTO_refcount_t references;
+
+  /* if defined, these override the X509_verify_cert() calls */
+  int (*app_verify_callback)(X509_STORE_CTX *store_ctx, void *arg);
+  void *app_verify_arg;
+
+  /* Default password callback. */
+  pem_password_cb *default_passwd_callback;
+
+  /* Default password callback user data. */
+  void *default_passwd_callback_userdata;
+
+  /* get client cert callback */
+  int (*client_cert_cb)(SSL *ssl, X509 **out_x509, EVP_PKEY **out_pkey);
+
+  /* get channel id callback */
+  void (*channel_id_cb)(SSL *ssl, EVP_PKEY **out_pkey);
+
+  CRYPTO_EX_DATA ex_data;
+
+  /* custom_*_extensions stores any callback sets for custom extensions. Note
+   * that these pointers will be NULL if the stack would otherwise be empty. */
+  STACK_OF(SSL_CUSTOM_EXTENSION) *client_custom_extensions;
+  STACK_OF(SSL_CUSTOM_EXTENSION) *server_custom_extensions;
+
+  /* Default values used when no per-SSL value is defined follow */
+
+  void (*info_callback)(const SSL *ssl, int type, int value);
+
+  /* what we put in client cert requests */
+  STACK_OF(X509_NAME) *client_CA;
+
+
+  /* Default values to use in SSL structures follow (these are copied by
+   * SSL_new) */
+
+  uint32_t options;
+  uint32_t mode;
+  uint32_t max_cert_list;
+
+  struct cert_st /* CERT */ *cert;
+
+  /* callback that allows applications to peek at protocol messages */
+  void (*msg_callback)(int write_p, int version, int content_type,
+                       const void *buf, size_t len, SSL *ssl, void *arg);
+  void *msg_callback_arg;
+
+  int verify_mode;
+  unsigned int sid_ctx_length;
+  uint8_t sid_ctx[SSL_MAX_SID_CTX_LENGTH];
+  int (*default_verify_callback)(
+      int ok, X509_STORE_CTX *ctx); /* called 'verify_callback' in the SSL */
+
+  X509_VERIFY_PARAM *param;
+
+  /* select_certificate_cb is called before most ClientHello processing and
+   * before the decision whether to resume a session is made. It may return one
+   * to continue the handshake or zero to cause the handshake loop to return
+   * with an error and cause SSL_get_error to return
+   * SSL_ERROR_PENDING_CERTIFICATE. Note: when the handshake loop is resumed, it
+   * will not call the callback a second time. */
+  int (*select_certificate_cb)(const struct ssl_early_callback_ctx *);
+
+  /* dos_protection_cb is called once the resumption decision for a ClientHello
+   * has been made. It returns one to continue the handshake or zero to
+   * abort. */
+  int (*dos_protection_cb) (const struct ssl_early_callback_ctx *);
+
+  /* Maximum amount of data to send in one fragment. actual record size can be
+   * more than this due to padding and MAC overheads. */
+  uint16_t max_send_fragment;
+
+  /* TLS extensions servername callback */
+  int (*tlsext_servername_callback)(SSL *, int *, void *);
+  void *tlsext_servername_arg;
+  /* RFC 4507 session ticket keys */
+  uint8_t tlsext_tick_key_name[SSL_TICKET_KEY_NAME_LEN];
+  uint8_t tlsext_tick_hmac_key[16];
+  uint8_t tlsext_tick_aes_key[16];
+  /* Callback to support customisation of ticket key setting */
+  int (*tlsext_ticket_key_cb)(SSL *ssl, uint8_t *name, uint8_t *iv,
+                              EVP_CIPHER_CTX *ectx, HMAC_CTX *hctx, int enc);
+
+  /* Server-only: psk_identity_hint is the default identity hint to send in
+   * PSK-based key exchanges. */
+  char *psk_identity_hint;
+
+  unsigned int (*psk_client_callback)(SSL *ssl, const char *hint,
+                                      char *identity,
+                                      unsigned int max_identity_len,
+                                      uint8_t *psk, unsigned int max_psk_len);
+  unsigned int (*psk_server_callback)(SSL *ssl, const char *identity,
+                                      uint8_t *psk, unsigned int max_psk_len);
+
+
+  /* retain_only_sha256_of_client_certs is true if we should compute the SHA256
+   * hash of the peer's certifiate and then discard it to save memory and
+   * session space. Only effective on the server side. */
+  char retain_only_sha256_of_client_certs;
+
+  /* Next protocol negotiation information */
+  /* (for experimental NPN extension). */
+
+  /* For a server, this contains a callback function by which the set of
+   * advertised protocols can be provided. */
+  int (*next_protos_advertised_cb)(SSL *ssl, const uint8_t **out,
+                                   unsigned *out_len, void *arg);
+  void *next_protos_advertised_cb_arg;
+  /* For a client, this contains a callback function that selects the
+   * next protocol from the list provided by the server. */
+  int (*next_proto_select_cb)(SSL *ssl, uint8_t **out, uint8_t *out_len,
+                              const uint8_t *in, unsigned in_len, void *arg);
+  void *next_proto_select_cb_arg;
+
+  /* ALPN information
+   * (we are in the process of transitioning from NPN to ALPN.) */
+
+  /* For a server, this contains a callback function that allows the
+   * server to select the protocol for the connection.
+   *   out: on successful return, this must point to the raw protocol
+   *        name (without the length prefix).
+   *   outlen: on successful return, this contains the length of |*out|.
+   *   in: points to the client's list of supported protocols in
+   *       wire-format.
+   *   inlen: the length of |in|. */
+  int (*alpn_select_cb)(SSL *s, const uint8_t **out, uint8_t *out_len,
+                        const uint8_t *in, unsigned in_len, void *arg);
+  void *alpn_select_cb_arg;
+
+  /* For a client, this contains the list of supported protocols in wire
+   * format. */
+  uint8_t *alpn_client_proto_list;
+  unsigned alpn_client_proto_list_len;
+
+  /* SRTP profiles we are willing to do from RFC 5764 */
+  STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles;
+
+  /* EC extension values inherited by SSL structure */
+  size_t tlsext_ellipticcurvelist_length;
+  uint16_t *tlsext_ellipticcurvelist;
+
+  /* The client's Channel ID private key. */
+  EVP_PKEY *tlsext_channel_id_private;
+
+  /* Signed certificate timestamp list to be sent to the client, if requested */
+  uint8_t *signed_cert_timestamp_list;
+  size_t signed_cert_timestamp_list_length;
+
+  /* OCSP response to be sent to the client, if requested. */
+  uint8_t *ocsp_response;
+  size_t ocsp_response_length;
+
+  /* keylog_callback, if not NULL, is the key logging callback. See
+   * |SSL_CTX_set_keylog_callback|. */
+  void (*keylog_callback)(const SSL *ssl, const char *line);
+
+  /* current_time_cb, if not NULL, is the function to use to get the current
+   * time. It sets |*out_clock| to the current time. */
+  void (*current_time_cb)(const SSL *ssl, struct timeval *out_clock);
+
+  /* quiet_shutdown is true if the connection should not send a close_notify on
+   * shutdown. */
+  unsigned quiet_shutdown:1;
+
+  /* ocsp_stapling_enabled is only used by client connections and indicates
+   * whether OCSP stapling will be requested. */
+  unsigned ocsp_stapling_enabled:1;
+
+  /* If true, a client will request certificate timestamps. */
+  unsigned signed_cert_timestamps_enabled:1;
+
+  /* tlsext_channel_id_enabled is copied from the |SSL_CTX|. For a server,
+   * means that we'll accept Channel IDs from clients. For a client, means that
+   * we'll advertise support. */
+  unsigned tlsext_channel_id_enabled:1;
+};
+
+struct ssl_st {
+  /* version is the protocol version. */
+  int version;
+
+  /* max_version is the maximum acceptable protocol version. If zero, the
+   * maximum supported version, currently (D)TLS 1.2, is used. */
+  uint16_t max_version;
+
+  /* min_version is the minimum acceptable protocl version. If zero, the
+   * minimum supported version, currently SSL 3.0 and DTLS 1.0, is used */
+  uint16_t min_version;
+
+  /* method is the method table corresponding to the current protocol (DTLS or
+   * TLS). */
+  const SSL_PROTOCOL_METHOD *method;
+
+  /* enc_method is the method table corresponding to the current protocol
+   * version. */
+  const SSL3_ENC_METHOD *enc_method;
+
+  /* There are 2 BIO's even though they are normally both the same. This is so
+   * data can be read and written to different handlers */
+
+  BIO *rbio; /* used by SSL_read */
+  BIO *wbio; /* used by SSL_write */
+
+  /* bbio, if non-NULL, is a buffer placed in front of |wbio| to pack handshake
+   * messages within one flight into a single |BIO_write|.
+   *
+   * TODO(davidben): This does not work right for DTLS. It assumes the MTU is
+   * smaller than the buffer size so that the buffer's internal flushing never
+   * kicks in. It also doesn't kick in for DTLS retransmission. Replace this
+   * with a better mechanism. */
+  BIO *bbio;
+
+  int (*handshake_func)(SSL *);
+
+  /* Imagine that here's a boolean member "init" that is switched as soon as
+   * SSL_set_{accept/connect}_state is called for the first time, so that
+   * "state" and "handshake_func" are properly initialized.  But as
+   * handshake_func is == 0 until then, we use this test instead of an "init"
+   * member. */
+
+  int shutdown; /* we have shut things down, 0x01 sent, 0x02
+                 * for received */
+  int state;    /* where we are */
+
+  BUF_MEM *init_buf; /* buffer used during init */
+  uint8_t *init_msg; /* pointer to handshake message body, set by
+                        ssl3_get_message() */
+  int init_num;      /* amount read/written */
+  int init_off;      /* amount read/written */
+
+  struct ssl3_state_st *s3;  /* SSLv3 variables */
+  struct dtls1_state_st *d1; /* DTLSv1 variables */
+
+  /* callback that allows applications to peek at protocol messages */
+  void (*msg_callback)(int write_p, int version, int content_type,
+                       const void *buf, size_t len, SSL *ssl, void *arg);
+  void *msg_callback_arg;
+
+  X509_VERIFY_PARAM *param;
+
+  /* crypto */
+  struct ssl_cipher_preference_list_st *cipher_list;
+  STACK_OF(SSL_CIPHER) *cipher_list_by_id;
+
+  SSL_AEAD_CTX *aead_read_ctx;
+  SSL_AEAD_CTX *aead_write_ctx;
+
+  /* session info */
+
+  /* client cert? */
+  /* This is used to hold the server certificate used */
+  struct cert_st /* CERT */ *cert;
+
+  /* This holds a variable that indicates what we were doing when a 0 or -1 is
+   * returned.  This is needed for non-blocking IO so we know what request
+   * needs re-doing when in SSL_accept or SSL_connect */
+  int rwstate;
+
+  /* the session_id_context is used to ensure sessions are only reused
+   * in the appropriate context */
+  unsigned int sid_ctx_length;
+  uint8_t sid_ctx[SSL_MAX_SID_CTX_LENGTH];
+
+  /* This can also be in the session once a session is established */
+  SSL_SESSION *session;
+
+  int (*verify_callback)(int ok,
+                         X509_STORE_CTX *ctx); /* fail if callback returns 0 */
+
+  void (*info_callback)(const SSL *ssl, int type, int value);
+
+  /* Server-only: psk_identity_hint is the identity hint to send in
+   * PSK-based key exchanges. */
+  char *psk_identity_hint;
+
+  unsigned int (*psk_client_callback)(SSL *ssl, const char *hint,
+                                      char *identity,
+                                      unsigned int max_identity_len,
+                                      uint8_t *psk, unsigned int max_psk_len);
+  unsigned int (*psk_server_callback)(SSL *ssl, const char *identity,
+                                      uint8_t *psk, unsigned int max_psk_len);
+
+  SSL_CTX *ctx;
+
+  /* extra application data */
+  long verify_result;
+  CRYPTO_EX_DATA ex_data;
+
+  /* for server side, keep the list of CA_dn we can use */
+  STACK_OF(X509_NAME) *client_CA;
+
+  uint32_t options; /* protocol behaviour */
+  uint32_t mode;    /* API behaviour */
+  uint32_t max_cert_list;
+  int client_version; /* what was passed, used for
+                       * SSLv3/TLS rollback check */
+  uint16_t max_send_fragment;
+  char *tlsext_hostname;
+  /* RFC4507 session ticket expected to be received or sent */
+  int tlsext_ticket_expected;
+  size_t tlsext_ellipticcurvelist_length;
+  uint16_t *tlsext_ellipticcurvelist; /* our list */
+
+  SSL_CTX *initial_ctx; /* initial ctx, used to store sessions */
+
+  /* Next protocol negotiation. For the client, this is the protocol that we
+   * sent in NextProtocol and is set when handling ServerHello extensions.
+   *
+   * For a server, this is the client's selected_protocol from NextProtocol and
+   * is set when handling the NextProtocol message, before the Finished
+   * message. */
+  uint8_t *next_proto_negotiated;
+  size_t next_proto_negotiated_len;
+
+  /* srtp_profiles is the list of configured SRTP protection profiles for
+   * DTLS-SRTP. */
+  STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles;
+
+  /* srtp_profile is the selected SRTP protection profile for
+   * DTLS-SRTP. */
+  const SRTP_PROTECTION_PROFILE *srtp_profile;
+
+  /* The client's Channel ID private key. */
+  EVP_PKEY *tlsext_channel_id_private;
+
+  /* For a client, this contains the list of supported protocols in wire
+   * format. */
+  uint8_t *alpn_client_proto_list;
+  unsigned alpn_client_proto_list_len;
+
+  /* renegotiate_mode controls how peer renegotiation attempts are handled. */
+  enum ssl_renegotiate_mode_t renegotiate_mode;
+
+  /* These fields are always NULL and exist only to keep wpa_supplicant happy
+   * about the change to EVP_AEAD. They are only needed for EAP-FAST, which we
+   * don't support. */
+  EVP_CIPHER_CTX *enc_read_ctx;
+  EVP_MD_CTX *read_hash;
+
+  /* in_handshake is non-zero when we are actually in SSL_accept() or
+   * SSL_connect() */
+  int in_handshake;
+
+  /* verify_mode is a bitmask of |SSL_VERIFY_*| values. */
+  uint8_t verify_mode;
+
+  /* hit is true if this connection is resuming a previous session. */
+  unsigned hit:1;
+
+  /* server is true iff the this SSL* is the server half. Note: before the SSL*
+   * is initialized by either SSL_set_accept_state or SSL_set_connect_state,
+   * the side is not determined. In this state, server is always false. */
+  unsigned server:1;
+
+  /* quiet_shutdown is true if the connection should not send a close_notify on
+   * shutdown. */
+  unsigned quiet_shutdown:1;
+
+  /* Enable signed certificate time stamps. Currently client only. */
+  unsigned signed_cert_timestamps_enabled:1;
+
+  /* ocsp_stapling_enabled is only used by client connections and indicates
+   * whether OCSP stapling will be requested. */
+  unsigned ocsp_stapling_enabled:1;
+
+  /* tlsext_channel_id_enabled is copied from the |SSL_CTX|. For a server,
+   * means that we'll accept Channel IDs from clients. For a client, means that
+   * we'll advertise support. */
+  unsigned tlsext_channel_id_enabled:1;
+};
+
+typedef struct ssl3_record_st {
+  /* type is the record type. */
+  uint8_t type;
+  /* length is the number of unconsumed bytes in the record. */
+  uint16_t length;
+  /* data is a non-owning pointer to the first unconsumed byte of the record. */
+  uint8_t *data;
+} SSL3_RECORD;
+
+typedef struct ssl3_buffer_st {
+  /* buf is the memory allocated for this buffer. */
+  uint8_t *buf;
+  /* offset is the offset into |buf| which the buffer contents start at. */
+  uint16_t offset;
+  /* len is the length of the buffer contents from |buf| + |offset|. */
+  uint16_t len;
+  /* cap is how much memory beyond |buf| + |offset| is available. */
+  uint16_t cap;
+} SSL3_BUFFER;
+
+typedef struct ssl3_state_st {
+  uint8_t read_sequence[8];
+  uint8_t write_sequence[8];
+
+  uint8_t server_random[SSL3_RANDOM_SIZE];
+  uint8_t client_random[SSL3_RANDOM_SIZE];
+
+  /* have_version is true if the connection's final version is known. Otherwise
+   * the version has not been negotiated yet. */
+  char have_version;
+
+  /* initial_handshake_complete is true if the initial handshake has
+   * completed. */
+  char initial_handshake_complete;
+
+  /* read_buffer holds data from the transport to be processed. */
+  SSL3_BUFFER read_buffer;
+  /* write_buffer holds data to be written to the transport. */
+  SSL3_BUFFER write_buffer;
+
+  SSL3_RECORD rrec; /* each decoded record goes in here */
+
+  /* hello_request_len is the number of bytes of HelloRequest received, possibly
+   * split over multiple records. */
+  uint8_t hello_request_len;
+
+  /* partial write - check the numbers match */
+  unsigned int wnum; /* number of bytes sent so far */
+  int wpend_tot;     /* number bytes written */
+  int wpend_type;
+  int wpend_ret; /* number of bytes submitted */
+  const uint8_t *wpend_buf;
+
+  /* handshake_buffer, if non-NULL, contains the handshake transcript. */
+  BUF_MEM *handshake_buffer;
+  /* handshake_hash, if initialized with an |EVP_MD|, maintains the handshake
+   * hash. For TLS 1.1 and below, it is the SHA-1 half. */
+  EVP_MD_CTX handshake_hash;
+  /* handshake_md5, if initialized with an |EVP_MD|, maintains the MD5 half of
+   * the handshake hash for TLS 1.1 and below. */
+  EVP_MD_CTX handshake_md5;
+
+  int warn_alert;
+  int fatal_alert;
+  /* we allow one fatal and one warning alert to be outstanding, send close
+   * alert via the warning alert */
+  int alert_dispatch;
+  uint8_t send_alert[2];
+
+  int total_renegotiations;
+
+  /* empty_record_count is the number of consecutive empty records received. */
+  uint8_t empty_record_count;
+
+  /* warning_alert_count is the number of consecutive warning alerts
+   * received. */
+  uint8_t warning_alert_count;
+
+  /* State pertaining to the pending handshake.
+   *
+   * TODO(davidben): State is current spread all over the place. Move
+   * pending handshake state here so it can be managed separately from
+   * established connection state in case of renegotiations. */
+  struct {
+    /* actually only need to be 16+20 for SSLv3 and 12 for TLS */
+    uint8_t finish_md[EVP_MAX_MD_SIZE * 2];
+    int finish_md_len;
+    uint8_t peer_finish_md[EVP_MAX_MD_SIZE * 2];
+    int peer_finish_md_len;
+
+    unsigned long message_size;
+    int message_type;
+
+    /* used to hold the new cipher we are going to use */
+    const SSL_CIPHER *new_cipher;
+    DH *dh;
+
+    EC_KEY *ecdh; /* holds short lived ECDH key */
+
+    /* used when SSL_ST_FLUSH_DATA is entered */
+    int next_state;
+
+    int reuse_message;
+
+    union {
+      /* sent is a bitset where the bits correspond to elements of kExtensions
+       * in t1_lib.c. Each bit is set if that extension was sent in a
+       * ClientHello. It's not used by servers. */
+      uint32_t sent;
+      /* received is a bitset, like |sent|, but is used by servers to record
+       * which extensions were received from a client. */
+      uint32_t received;
+    } extensions;
+
+    union {
+      /* sent is a bitset where the bits correspond to elements of
+       * |client_custom_extensions| in the |SSL_CTX|. Each bit is set if that
+       * extension was sent in a ClientHello. It's not used by servers. */
+      uint16_t sent;
+      /* received is a bitset, like |sent|, but is used by servers to record
+       * which custom extensions were received from a client. The bits here
+       * correspond to |server_custom_extensions|. */
+      uint16_t received;
+    } custom_extensions;
+
+    /* SNI extension */
+
+    /* should_ack_sni is used by a server and indicates that the SNI extension
+     * should be echoed in the ServerHello. */
+    unsigned should_ack_sni:1;
+
+
+    /* Client-only: cert_req determines if a client certificate is to be sent.
+     * This is 0 if no client Certificate message is to be sent, 1 if there is
+     * a client certificate, and 2 to send an empty client Certificate
+     * message. */
+    int cert_req;
+
+    /* Client-only: ca_names contains the list of CAs received in a
+     * CertificateRequest message. */
+    STACK_OF(X509_NAME) *ca_names;
+
+    /* Client-only: certificate_types contains the set of certificate types
+     * received in a CertificateRequest message. */
+    uint8_t *certificate_types;
+    size_t num_certificate_types;
+
+    int key_block_length;
+    uint8_t *key_block;
+
+    const EVP_AEAD *new_aead;
+    uint8_t new_mac_secret_len;
+    uint8_t new_fixed_iv_len;
+    uint8_t new_variable_iv_len;
+
+    /* Server-only: cert_request is true if a client certificate was
+     * requested. */
+    int cert_request;
+
+    /* certificate_status_expected is true if OCSP stapling was negotiated and
+     * the server is expected to send a CertificateStatus message. (This is
+     * used on both the client and server sides.) */
+    unsigned certificate_status_expected:1;
+
+    /* ocsp_stapling_requested is true if a client requested OCSP stapling. */
+    unsigned ocsp_stapling_requested:1;
+
+    /* Server-only: peer_ellipticcurvelist contains the EC curve IDs advertised
+     * by the peer. This is only set on the server's end. The server does not
+     * advertise this extension to the client. */
+    uint16_t *peer_ellipticcurvelist;
+    size_t peer_ellipticcurvelist_length;
+
+    /* extended_master_secret indicates whether the extended master secret
+     * computation is used in this handshake. Note that this is different from
+     * whether it was used for the current session. If this is a resumption
+     * handshake then EMS might be negotiated in the client and server hello
+     * messages, but it doesn't matter if the session that's being resumed
+     * didn't use it to create the master secret initially. */
+    char extended_master_secret;
+
+    /* Client-only: peer_psk_identity_hint is the psk_identity_hint sent by the
+     * server when using a PSK key exchange. */
+    char *peer_psk_identity_hint;
+
+    /* new_mac_secret_size is unused and exists only until wpa_supplicant can
+     * be updated. It is only needed for EAP-FAST, which we don't support. */
+    uint8_t new_mac_secret_size;
+
+    /* Client-only: in_false_start is one if there is a pending handshake in
+     * False Start. The client may write data at this point. */
+    char in_false_start;
+
+    /* server_key_exchange_hash, on a client, is the hash the server used to
+     * sign the ServerKeyExchange in TLS 1.2. If not applicable, it is
+     * |TLSEXT_hash_none|. */
+    uint8_t server_key_exchange_hash;
+
+    /* peer_dh_tmp, on a client, is the server's DHE public key. */
+    DH *peer_dh_tmp;
+
+    /* peer_ecdh_tmp, on a client, is the server's ECDHE public key. */
+    EC_KEY *peer_ecdh_tmp;
+  } tmp;
+
+  /* Connection binding to prevent renegotiation attacks */
+  uint8_t previous_client_finished[EVP_MAX_MD_SIZE];
+  uint8_t previous_client_finished_len;
+  uint8_t previous_server_finished[EVP_MAX_MD_SIZE];
+  uint8_t previous_server_finished_len;
+  int send_connection_binding; /* TODOEKR */
+
+  /* Set if we saw the Next Protocol Negotiation extension from our peer. */
+  int next_proto_neg_seen;
+
+  /* ALPN information
+   * (we are in the process of transitioning from NPN to ALPN.) */
+
+  /* In a server these point to the selected ALPN protocol after the
+   * ClientHello has been processed. In a client these contain the protocol
+   * that the server selected once the ServerHello has been processed. */
+  uint8_t *alpn_selected;
+  size_t alpn_selected_len;
+
+  /* In a client, this means that the server supported Channel ID and that a
+   * Channel ID was sent. In a server it means that we echoed support for
+   * Channel IDs and that tlsext_channel_id will be valid after the
+   * handshake. */
+  char tlsext_channel_id_valid;
+  /* For a server:
+   *     If |tlsext_channel_id_valid| is true, then this contains the
+   *     verified Channel ID from the client: a P256 point, (x,y), where
+   *     each are big-endian values. */
+  uint8_t tlsext_channel_id[64];
+} SSL3_STATE;
+
+
+/* Android compatibility section (hidden).
+ *
+ * These functions are declared, temporarily, for Android because
+ * wpa_supplicant will take a little time to sync with upstream. Outside of
+ * Android they'll have no definition. */
+
+#define SSL_F_SSL_SET_SESSION_TICKET_EXT doesnt_exist
+
+OPENSSL_EXPORT int SSL_set_session_ticket_ext(SSL *s, void *ext_data,
+                                              int ext_len);
+OPENSSL_EXPORT int SSL_set_session_secret_cb(SSL *s, void *cb, void *arg);
+OPENSSL_EXPORT int SSL_set_session_ticket_ext_cb(SSL *s, void *cb, void *arg);
+OPENSSL_EXPORT int SSL_set_ssl_method(SSL *s, const SSL_METHOD *method);
+
+
+/* Preprocessor compatibility section (hidden).
+ *
+ * Historically, a number of APIs were implemented in OpenSSL as macros and
+ * constants to 'ctrl' functions. To avoid breaking #ifdefs in consumers, this
+ * section defines a number of legacy macros.
+ *
+ * Although using either the CTRL values or their wrapper macros in #ifdefs is
+ * still supported, the CTRL values may not be passed to |SSL_ctrl| and
+ * |SSL_CTX_ctrl|. Call the functions (previously wrapper macros) instead. */
+
+#define DTLS_CTRL_GET_TIMEOUT doesnt_exist
+#define DTLS_CTRL_HANDLE_TIMEOUT doesnt_exist
+#define SSL_CTRL_CHAIN doesnt_exist
+#define SSL_CTRL_CHAIN_CERT doesnt_exist
+#define SSL_CTRL_CHANNEL_ID doesnt_exist
+#define SSL_CTRL_CLEAR_EXTRA_CHAIN_CERTS doesnt_exist
+#define SSL_CTRL_CLEAR_MODE doesnt_exist
+#define SSL_CTRL_CLEAR_OPTIONS doesnt_exist
+#define SSL_CTRL_EXTRA_CHAIN_CERT doesnt_exist
+#define SSL_CTRL_GET_CHAIN_CERTS doesnt_exist
+#define SSL_CTRL_GET_CHANNEL_ID doesnt_exist
+#define SSL_CTRL_GET_CLIENT_CERT_TYPES doesnt_exist
+#define SSL_CTRL_GET_EXTRA_CHAIN_CERTS doesnt_exist
+#define SSL_CTRL_GET_MAX_CERT_LIST doesnt_exist
+#define SSL_CTRL_GET_NUM_RENEGOTIATIONS doesnt_exist
+#define SSL_CTRL_GET_READ_AHEAD doesnt_exist
+#define SSL_CTRL_GET_RI_SUPPORT doesnt_exist
+#define SSL_CTRL_GET_SESSION_REUSED doesnt_exist
+#define SSL_CTRL_GET_SESS_CACHE_MODE doesnt_exist
+#define SSL_CTRL_GET_SESS_CACHE_SIZE doesnt_exist
+#define SSL_CTRL_GET_TLSEXT_TICKET_KEYS doesnt_exist
+#define SSL_CTRL_GET_TOTAL_RENEGOTIATIONS doesnt_exist
+#define SSL_CTRL_MODE doesnt_exist
+#define SSL_CTRL_NEED_TMP_RSA doesnt_exist
+#define SSL_CTRL_OPTIONS doesnt_exist
+#define SSL_CTRL_SESS_NUMBER doesnt_exist
+#define SSL_CTRL_SET_CHANNEL_ID doesnt_exist
+#define SSL_CTRL_SET_CURVES doesnt_exist
+#define SSL_CTRL_SET_MAX_CERT_LIST doesnt_exist
+#define SSL_CTRL_SET_MAX_SEND_FRAGMENT doesnt_exist
+#define SSL_CTRL_SET_MSG_CALLBACK doesnt_exist
+#define SSL_CTRL_SET_MSG_CALLBACK_ARG doesnt_exist
+#define SSL_CTRL_SET_MTU doesnt_exist
+#define SSL_CTRL_SET_READ_AHEAD doesnt_exist
+#define SSL_CTRL_SET_SESS_CACHE_MODE doesnt_exist
+#define SSL_CTRL_SET_SESS_CACHE_SIZE doesnt_exist
+#define SSL_CTRL_SET_TLSEXT_HOSTNAME doesnt_exist
+#define SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG doesnt_exist
+#define SSL_CTRL_SET_TLSEXT_SERVERNAME_CB doesnt_exist
+#define SSL_CTRL_SET_TLSEXT_TICKET_KEYS doesnt_exist
+#define SSL_CTRL_SET_TLSEXT_TICKET_KEY_CB doesnt_exist
+#define SSL_CTRL_SET_TMP_DH doesnt_exist
+#define SSL_CTRL_SET_TMP_DH_CB doesnt_exist
+#define SSL_CTRL_SET_TMP_ECDH doesnt_exist
+#define SSL_CTRL_SET_TMP_ECDH_CB doesnt_exist
+#define SSL_CTRL_SET_TMP_RSA doesnt_exist
+#define SSL_CTRL_SET_TMP_RSA_CB doesnt_exist
+
+#define DTLSv1_get_timeout DTLSv1_get_timeout
+#define DTLSv1_handle_timeout DTLSv1_handle_timeout
+#define SSL_CTX_add0_chain_cert SSL_CTX_add0_chain_cert
+#define SSL_CTX_add1_chain_cert SSL_CTX_add1_chain_cert
+#define SSL_CTX_add_extra_chain_cert SSL_CTX_add_extra_chain_cert
+#define SSL_CTX_clear_extra_chain_certs SSL_CTX_clear_extra_chain_certs
+#define SSL_CTX_clear_chain_certs SSL_CTX_clear_chain_certs
+#define SSL_CTX_clear_mode SSL_CTX_clear_mode
+#define SSL_CTX_clear_options SSL_CTX_clear_options
+#define SSL_CTX_enable_tls_channel_id SSL_CTX_enable_tls_channel_id
+#define SSL_CTX_get0_chain_certs SSL_CTX_get0_chain_certs
+#define SSL_CTX_get_extra_chain_certs SSL_CTX_get_extra_chain_certs
+#define SSL_CTX_get_max_cert_list SSL_CTX_get_max_cert_list
+#define SSL_CTX_get_mode SSL_CTX_get_mode
+#define SSL_CTX_get_options SSL_CTX_get_options
+#define SSL_CTX_get_read_ahead SSL_CTX_get_read_ahead
+#define SSL_CTX_get_session_cache_mode SSL_CTX_get_session_cache_mode
+#define SSL_CTX_get_tlsext_ticket_keys SSL_CTX_get_tlsext_ticket_keys
+#define SSL_CTX_need_tmp_RSA SSL_CTX_need_tmp_RSA
+#define SSL_CTX_sess_get_cache_size SSL_CTX_sess_get_cache_size
+#define SSL_CTX_sess_number SSL_CTX_sess_number
+#define SSL_CTX_sess_set_cache_size SSL_CTX_sess_set_cache_size
+#define SSL_CTX_set0_chain SSL_CTX_set0_chain
+#define SSL_CTX_set1_chain SSL_CTX_set1_chain
+#define SSL_CTX_set1_curves SSL_CTX_set1_curves
+#define SSL_CTX_set1_tls_channel_id SSL_CTX_set1_tls_channel_id
+#define SSL_CTX_set_max_cert_list SSL_CTX_set_max_cert_list
+#define SSL_CTX_set_max_send_fragment SSL_CTX_set_max_send_fragment
+#define SSL_CTX_set_mode SSL_CTX_set_mode
+#define SSL_CTX_set_msg_callback_arg SSL_CTX_set_msg_callback_arg
+#define SSL_CTX_set_options SSL_CTX_set_options
+#define SSL_CTX_set_read_ahead SSL_CTX_set_read_ahead
+#define SSL_CTX_set_session_cache_mode SSL_CTX_set_session_cache_mode
+#define SSL_CTX_set_tlsext_servername_arg SSL_CTX_set_tlsext_servername_arg
+#define SSL_CTX_set_tlsext_servername_callback \
+    SSL_CTX_set_tlsext_servername_callback
+#define SSL_CTX_set_tlsext_ticket_key_cb SSL_CTX_set_tlsext_ticket_key_cb
+#define SSL_CTX_set_tlsext_ticket_keys SSL_CTX_set_tlsext_ticket_keys
+#define SSL_CTX_set_tmp_dh SSL_CTX_set_tmp_dh
+#define SSL_CTX_set_tmp_ecdh SSL_CTX_set_tmp_ecdh
+#define SSL_CTX_set_tmp_rsa SSL_CTX_set_tmp_rsa
+#define SSL_add0_chain_cert SSL_add0_chain_cert
+#define SSL_add1_chain_cert SSL_add1_chain_cert
+#define SSL_clear_chain_certs SSL_clear_chain_certs
+#define SSL_clear_mode SSL_clear_mode
+#define SSL_clear_options SSL_clear_options
+#define SSL_enable_tls_channel_id SSL_enable_tls_channel_id
+#define SSL_get0_certificate_types SSL_get0_certificate_types
+#define SSL_get0_chain_certs SSL_get0_chain_certs
+#define SSL_get_max_cert_list SSL_get_max_cert_list
+#define SSL_get_mode SSL_get_mode
+#define SSL_get_options SSL_get_options
+#define SSL_get_secure_renegotiation_support \
+    SSL_get_secure_renegotiation_support
+#define SSL_get_tls_channel_id SSL_get_tls_channel_id
+#define SSL_need_tmp_RSA SSL_need_tmp_RSA
+#define SSL_num_renegotiations SSL_num_renegotiations
+#define SSL_session_reused SSL_session_reused
+#define SSL_set0_chain SSL_set0_chain
+#define SSL_set1_chain SSL_set1_chain
+#define SSL_set1_curves SSL_set1_curves
+#define SSL_set1_tls_channel_id SSL_set1_tls_channel_id
+#define SSL_set_max_cert_list SSL_set_max_cert_list
+#define SSL_set_max_send_fragment SSL_set_max_send_fragment
+#define SSL_set_mode SSL_set_mode
+#define SSL_set_msg_callback_arg SSL_set_msg_callback_arg
+#define SSL_set_mtu SSL_set_mtu
+#define SSL_set_options SSL_set_options
+#define SSL_set_tlsext_host_name SSL_set_tlsext_host_name
+#define SSL_set_tmp_dh SSL_set_tmp_dh
+#define SSL_set_tmp_ecdh SSL_set_tmp_ecdh
+#define SSL_set_tmp_rsa SSL_set_tmp_rsa
+#define SSL_total_renegotiations SSL_total_renegotiations
+
+
+#if defined(__cplusplus)
+} /* extern C */
+#endif
+
+#define SSL_R_APP_DATA_IN_HANDSHAKE 100
+#define SSL_R_ATTEMPT_TO_REUSE_SESSION_IN_DIFFERENT_CONTEXT 101
+#define SSL_R_BAD_ALERT 102
+#define SSL_R_BAD_CHANGE_CIPHER_SPEC 103
+#define SSL_R_BAD_DATA_RETURNED_BY_CALLBACK 104
+#define SSL_R_BAD_DH_P_LENGTH 105
+#define SSL_R_BAD_DIGEST_LENGTH 106
+#define SSL_R_BAD_ECC_CERT 107
+#define SSL_R_BAD_ECPOINT 108
+#define SSL_R_BAD_HANDSHAKE_RECORD 109
+#define SSL_R_BAD_HELLO_REQUEST 110
+#define SSL_R_BAD_LENGTH 111
+#define SSL_R_BAD_PACKET_LENGTH 112
+#define SSL_R_BAD_RSA_ENCRYPT 113
+#define SSL_R_BAD_SIGNATURE 114
+#define SSL_R_BAD_SRTP_MKI_VALUE 115
+#define SSL_R_BAD_SRTP_PROTECTION_PROFILE_LIST 116
+#define SSL_R_BAD_SSL_FILETYPE 117
+#define SSL_R_BAD_WRITE_RETRY 118
+#define SSL_R_BIO_NOT_SET 119
+#define SSL_R_BN_LIB 120
+#define SSL_R_BUFFER_TOO_SMALL 121
+#define SSL_R_CA_DN_LENGTH_MISMATCH 122
+#define SSL_R_CA_DN_TOO_LONG 123
+#define SSL_R_CCS_RECEIVED_EARLY 124
+#define SSL_R_CERTIFICATE_VERIFY_FAILED 125
+#define SSL_R_CERT_CB_ERROR 126
+#define SSL_R_CERT_LENGTH_MISMATCH 127
+#define SSL_R_CHANNEL_ID_NOT_P256 128
+#define SSL_R_CHANNEL_ID_SIGNATURE_INVALID 129
+#define SSL_R_CIPHER_OR_HASH_UNAVAILABLE 130
+#define SSL_R_CLIENTHELLO_PARSE_FAILED 131
+#define SSL_R_CLIENTHELLO_TLSEXT 132
+#define SSL_R_CONNECTION_REJECTED 133
+#define SSL_R_CONNECTION_TYPE_NOT_SET 134
+#define SSL_R_CUSTOM_EXTENSION_ERROR 135
+#define SSL_R_DATA_LENGTH_TOO_LONG 136
+#define SSL_R_DECODE_ERROR 137
+#define SSL_R_DECRYPTION_FAILED 138
+#define SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC 139
+#define SSL_R_DH_PUBLIC_VALUE_LENGTH_IS_WRONG 140
+#define SSL_R_DH_P_TOO_LONG 141
+#define SSL_R_DIGEST_CHECK_FAILED 142
+#define SSL_R_DTLS_MESSAGE_TOO_BIG 143
+#define SSL_R_ECC_CERT_NOT_FOR_SIGNING 144
+#define SSL_R_EMS_STATE_INCONSISTENT 145
+#define SSL_R_ENCRYPTED_LENGTH_TOO_LONG 146
+#define SSL_R_ERROR_ADDING_EXTENSION 147
+#define SSL_R_ERROR_IN_RECEIVED_CIPHER_LIST 148
+#define SSL_R_ERROR_PARSING_EXTENSION 149
+#define SSL_R_EXCESSIVE_MESSAGE_SIZE 150
+#define SSL_R_EXTRA_DATA_IN_MESSAGE 151
+#define SSL_R_FRAGMENT_MISMATCH 152
+#define SSL_R_GOT_NEXT_PROTO_WITHOUT_EXTENSION 153
+#define SSL_R_HANDSHAKE_FAILURE_ON_CLIENT_HELLO 154
+#define SSL_R_HTTPS_PROXY_REQUEST 155
+#define SSL_R_HTTP_REQUEST 156
+#define SSL_R_INAPPROPRIATE_FALLBACK 157
+#define SSL_R_INVALID_COMMAND 158
+#define SSL_R_INVALID_MESSAGE 159
+#define SSL_R_INVALID_SSL_SESSION 160
+#define SSL_R_INVALID_TICKET_KEYS_LENGTH 161
+#define SSL_R_LENGTH_MISMATCH 162
+#define SSL_R_LIBRARY_HAS_NO_CIPHERS 163
+#define SSL_R_MISSING_EXTENSION 164
+#define SSL_R_MISSING_RSA_CERTIFICATE 165
+#define SSL_R_MISSING_TMP_DH_KEY 166
+#define SSL_R_MISSING_TMP_ECDH_KEY 167
+#define SSL_R_MIXED_SPECIAL_OPERATOR_WITH_GROUPS 168
+#define SSL_R_MTU_TOO_SMALL 169
+#define SSL_R_NEGOTIATED_BOTH_NPN_AND_ALPN 170
+#define SSL_R_NESTED_GROUP 171
+#define SSL_R_NO_CERTIFICATES_RETURNED 172
+#define SSL_R_NO_CERTIFICATE_ASSIGNED 173
+#define SSL_R_NO_CERTIFICATE_SET 174
+#define SSL_R_NO_CIPHERS_AVAILABLE 175
+#define SSL_R_NO_CIPHERS_PASSED 176
+#define SSL_R_NO_CIPHER_MATCH 177
+#define SSL_R_NO_COMPRESSION_SPECIFIED 178
+#define SSL_R_NO_METHOD_SPECIFIED 179
+#define SSL_R_NO_P256_SUPPORT 180
+#define SSL_R_NO_PRIVATE_KEY_ASSIGNED 181
+#define SSL_R_NO_RENEGOTIATION 182
+#define SSL_R_NO_REQUIRED_DIGEST 183
+#define SSL_R_NO_SHARED_CIPHER 184
+#define SSL_R_NULL_SSL_CTX 185
+#define SSL_R_NULL_SSL_METHOD_PASSED 186
+#define SSL_R_OLD_SESSION_CIPHER_NOT_RETURNED 187
+#define SSL_R_OLD_SESSION_VERSION_NOT_RETURNED 188
+#define SSL_R_OUTPUT_ALIASES_INPUT 189
+#define SSL_R_PARSE_TLSEXT 190
+#define SSL_R_PATH_TOO_LONG 191
+#define SSL_R_PEER_DID_NOT_RETURN_A_CERTIFICATE 192
+#define SSL_R_PEER_ERROR_UNSUPPORTED_CERTIFICATE_TYPE 193
+#define SSL_R_PROTOCOL_IS_SHUTDOWN 194
+#define SSL_R_PSK_IDENTITY_NOT_FOUND 195
+#define SSL_R_PSK_NO_CLIENT_CB 196
+#define SSL_R_PSK_NO_SERVER_CB 197
+#define SSL_R_READ_TIMEOUT_EXPIRED 198
+#define SSL_R_RECORD_LENGTH_MISMATCH 199
+#define SSL_R_RECORD_TOO_LARGE 200
+#define SSL_R_RENEGOTIATION_ENCODING_ERR 201
+#define SSL_R_RENEGOTIATION_MISMATCH 202
+#define SSL_R_REQUIRED_CIPHER_MISSING 203
+#define SSL_R_RESUMED_EMS_SESSION_WITHOUT_EMS_EXTENSION 204
+#define SSL_R_RESUMED_NON_EMS_SESSION_WITH_EMS_EXTENSION 205
+#define SSL_R_SCSV_RECEIVED_WHEN_RENEGOTIATING 206
+#define SSL_R_SERVERHELLO_TLSEXT 207
+#define SSL_R_SESSION_ID_CONTEXT_UNINITIALIZED 208
+#define SSL_R_SESSION_MAY_NOT_BE_CREATED 209
+#define SSL_R_SIGNATURE_ALGORITHMS_EXTENSION_SENT_BY_SERVER 210
+#define SSL_R_SRTP_COULD_NOT_ALLOCATE_PROFILES 211
+#define SSL_R_SRTP_UNKNOWN_PROTECTION_PROFILE 212
+#define SSL_R_SSL3_EXT_INVALID_SERVERNAME 213
+#define SSL_R_SSL_CTX_HAS_NO_DEFAULT_SSL_VERSION 214
+#define SSL_R_SSL_HANDSHAKE_FAILURE 215
+#define SSL_R_SSL_SESSION_ID_CONTEXT_TOO_LONG 216
+#define SSL_R_TLS_PEER_DID_NOT_RESPOND_WITH_CERTIFICATE_LIST 217
+#define SSL_R_TLS_RSA_ENCRYPTED_VALUE_LENGTH_IS_WRONG 218
+#define SSL_R_TOO_MANY_EMPTY_FRAGMENTS 219
+#define SSL_R_TOO_MANY_WARNING_ALERTS 220
+#define SSL_R_UNABLE_TO_FIND_ECDH_PARAMETERS 221
+#define SSL_R_UNEXPECTED_EXTENSION 222
+#define SSL_R_UNEXPECTED_MESSAGE 223
+#define SSL_R_UNEXPECTED_OPERATOR_IN_GROUP 224
+#define SSL_R_UNEXPECTED_RECORD 225
+#define SSL_R_UNINITIALIZED 226
+#define SSL_R_UNKNOWN_ALERT_TYPE 227
+#define SSL_R_UNKNOWN_CERTIFICATE_TYPE 228
+#define SSL_R_UNKNOWN_CIPHER_RETURNED 229
+#define SSL_R_UNKNOWN_CIPHER_TYPE 230
+#define SSL_R_UNKNOWN_DIGEST 231
+#define SSL_R_UNKNOWN_KEY_EXCHANGE_TYPE 232
+#define SSL_R_UNKNOWN_PROTOCOL 233
+#define SSL_R_UNKNOWN_SSL_VERSION 234
+#define SSL_R_UNKNOWN_STATE 235
+#define SSL_R_UNSAFE_LEGACY_RENEGOTIATION_DISABLED 236
+#define SSL_R_UNSUPPORTED_CIPHER 237
+#define SSL_R_UNSUPPORTED_COMPRESSION_ALGORITHM 238
+#define SSL_R_UNSUPPORTED_ELLIPTIC_CURVE 239
+#define SSL_R_UNSUPPORTED_PROTOCOL 240
+#define SSL_R_WRONG_CERTIFICATE_TYPE 241
+#define SSL_R_WRONG_CIPHER_RETURNED 242
+#define SSL_R_WRONG_CURVE 243
+#define SSL_R_WRONG_MESSAGE_TYPE 244
+#define SSL_R_WRONG_SIGNATURE_TYPE 245
+#define SSL_R_WRONG_SSL_VERSION 246
+#define SSL_R_WRONG_VERSION_NUMBER 247
+#define SSL_R_X509_LIB 248
+#define SSL_R_X509_VERIFICATION_SETUP_PROBLEMS 249
+#define SSL_R_SSLV3_ALERT_CLOSE_NOTIFY 1000
+#define SSL_R_SSLV3_ALERT_UNEXPECTED_MESSAGE 1010
+#define SSL_R_SSLV3_ALERT_BAD_RECORD_MAC 1020
+#define SSL_R_TLSV1_ALERT_DECRYPTION_FAILED 1021
+#define SSL_R_TLSV1_ALERT_RECORD_OVERFLOW 1022
+#define SSL_R_SSLV3_ALERT_DECOMPRESSION_FAILURE 1030
+#define SSL_R_SSLV3_ALERT_HANDSHAKE_FAILURE 1040
+#define SSL_R_SSLV3_ALERT_NO_CERTIFICATE 1041
+#define SSL_R_SSLV3_ALERT_BAD_CERTIFICATE 1042
+#define SSL_R_SSLV3_ALERT_UNSUPPORTED_CERTIFICATE 1043
+#define SSL_R_SSLV3_ALERT_CERTIFICATE_REVOKED 1044
+#define SSL_R_SSLV3_ALERT_CERTIFICATE_EXPIRED 1045
+#define SSL_R_SSLV3_ALERT_CERTIFICATE_UNKNOWN 1046
+#define SSL_R_SSLV3_ALERT_ILLEGAL_PARAMETER 1047
+#define SSL_R_TLSV1_ALERT_UNKNOWN_CA 1048
+#define SSL_R_TLSV1_ALERT_ACCESS_DENIED 1049
+#define SSL_R_TLSV1_ALERT_DECODE_ERROR 1050
+#define SSL_R_TLSV1_ALERT_DECRYPT_ERROR 1051
+#define SSL_R_TLSV1_ALERT_EXPORT_RESTRICTION 1060
+#define SSL_R_TLSV1_ALERT_PROTOCOL_VERSION 1070
+#define SSL_R_TLSV1_ALERT_INSUFFICIENT_SECURITY 1071
+#define SSL_R_TLSV1_ALERT_INTERNAL_ERROR 1080
+#define SSL_R_TLSV1_ALERT_INAPPROPRIATE_FALLBACK 1086
+#define SSL_R_TLSV1_ALERT_USER_CANCELLED 1090
+#define SSL_R_TLSV1_ALERT_NO_RENEGOTIATION 1100
+#define SSL_R_TLSV1_UNSUPPORTED_EXTENSION 1110
+#define SSL_R_TLSV1_CERTIFICATE_UNOBTAINABLE 1111
+#define SSL_R_TLSV1_UNRECOGNIZED_NAME 1112
+#define SSL_R_TLSV1_BAD_CERTIFICATE_STATUS_RESPONSE 1113
+#define SSL_R_TLSV1_BAD_CERTIFICATE_HASH_VALUE 1114
+
+#endif /* OPENSSL_HEADER_SSL_H */