epeg 1.0

data/epeg/vendor/libjpeg-turbo-2.0.4/jdsample.c

@@ -0,0 +1,518 @@
+/*
+ * jdsample.c
+ *
+ * This file was part of the Independent JPEG Group's software:
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * libjpeg-turbo Modifications:
+ * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
+ * Copyright (C) 2010, 2015-2016, D. R. Commander.
+ * Copyright (C) 2014, MIPS Technologies, Inc., California.
+ * Copyright (C) 2015, Google, Inc.
+ * Copyright (C) 2019, Arm Limited.
+ * For conditions of distribution and use, see the accompanying README.ijg
+ * file.
+ *
+ * This file contains upsampling routines.
+ *
+ * Upsampling input data is counted in "row groups".  A row group
+ * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size)
+ * sample rows of each component.  Upsampling will normally produce
+ * max_v_samp_factor pixel rows from each row group (but this could vary
+ * if the upsampler is applying a scale factor of its own).
+ *
+ * An excellent reference for image resampling is
+ *   Digital Image Warping, George Wolberg, 1990.
+ *   Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7.
+ */
+
+#include "jinclude.h"
+#include "jdsample.h"
+#include "jsimd.h"
+#include "jpegcomp.h"
+
+
+
+/*
+ * Initialize for an upsampling pass.
+ */
+
+METHODDEF(void)
+start_pass_upsample(j_decompress_ptr cinfo)
+{
+  my_upsample_ptr upsample = (my_upsample_ptr)cinfo->upsample;
+
+  /* Mark the conversion buffer empty */
+  upsample->next_row_out = cinfo->max_v_samp_factor;
+  /* Initialize total-height counter for detecting bottom of image */
+  upsample->rows_to_go = cinfo->output_height;
+}
+
+
+/*
+ * Control routine to do upsampling (and color conversion).
+ *
+ * In this version we upsample each component independently.
+ * We upsample one row group into the conversion buffer, then apply
+ * color conversion a row at a time.
+ */
+
+METHODDEF(void)
+sep_upsample(j_decompress_ptr cinfo, JSAMPIMAGE input_buf,
+             JDIMENSION *in_row_group_ctr, JDIMENSION in_row_groups_avail,
+             JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+             JDIMENSION out_rows_avail)
+{
+  my_upsample_ptr upsample = (my_upsample_ptr)cinfo->upsample;
+  int ci;
+  jpeg_component_info *compptr;
+  JDIMENSION num_rows;
+
+  /* Fill the conversion buffer, if it's empty */
+  if (upsample->next_row_out >= cinfo->max_v_samp_factor) {
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+         ci++, compptr++) {
+      /* Invoke per-component upsample method.  Notice we pass a POINTER
+       * to color_buf[ci], so that fullsize_upsample can change it.
+       */
+      (*upsample->methods[ci]) (cinfo, compptr,
+        input_buf[ci] + (*in_row_group_ctr * upsample->rowgroup_height[ci]),
+        upsample->color_buf + ci);
+    }
+    upsample->next_row_out = 0;
+  }
+
+  /* Color-convert and emit rows */
+
+  /* How many we have in the buffer: */
+  num_rows = (JDIMENSION)(cinfo->max_v_samp_factor - upsample->next_row_out);
+  /* Not more than the distance to the end of the image.  Need this test
+   * in case the image height is not a multiple of max_v_samp_factor:
+   */
+  if (num_rows > upsample->rows_to_go)
+    num_rows = upsample->rows_to_go;
+  /* And not more than what the client can accept: */
+  out_rows_avail -= *out_row_ctr;
+  if (num_rows > out_rows_avail)
+    num_rows = out_rows_avail;
+
+  (*cinfo->cconvert->color_convert) (cinfo, upsample->color_buf,
+                                     (JDIMENSION)upsample->next_row_out,
+                                     output_buf + *out_row_ctr, (int)num_rows);
+
+  /* Adjust counts */
+  *out_row_ctr += num_rows;
+  upsample->rows_to_go -= num_rows;
+  upsample->next_row_out += num_rows;
+  /* When the buffer is emptied, declare this input row group consumed */
+  if (upsample->next_row_out >= cinfo->max_v_samp_factor)
+    (*in_row_group_ctr)++;
+}
+
+
+/*
+ * These are the routines invoked by sep_upsample to upsample pixel values
+ * of a single component.  One row group is processed per call.
+ */
+
+
+/*
+ * For full-size components, we just make color_buf[ci] point at the
+ * input buffer, and thus avoid copying any data.  Note that this is
+ * safe only because sep_upsample doesn't declare the input row group
+ * "consumed" until we are done color converting and emitting it.
+ */
+
+METHODDEF(void)
+fullsize_upsample(j_decompress_ptr cinfo, jpeg_component_info *compptr,
+                  JSAMPARRAY input_data, JSAMPARRAY *output_data_ptr)
+{
+  *output_data_ptr = input_data;
+}
+
+
+/*
+ * This is a no-op version used for "uninteresting" components.
+ * These components will not be referenced by color conversion.
+ */
+
+METHODDEF(void)
+noop_upsample(j_decompress_ptr cinfo, jpeg_component_info *compptr,
+              JSAMPARRAY input_data, JSAMPARRAY *output_data_ptr)
+{
+  *output_data_ptr = NULL;      /* safety check */
+}
+
+
+/*
+ * This version handles any integral sampling ratios.
+ * This is not used for typical JPEG files, so it need not be fast.
+ * Nor, for that matter, is it particularly accurate: the algorithm is
+ * simple replication of the input pixel onto the corresponding output
+ * pixels.  The hi-falutin sampling literature refers to this as a
+ * "box filter".  A box filter tends to introduce visible artifacts,
+ * so if you are actually going to use 3:1 or 4:1 sampling ratios
+ * you would be well advised to improve this code.
+ */
+
+METHODDEF(void)
+int_upsample(j_decompress_ptr cinfo, jpeg_component_info *compptr,
+             JSAMPARRAY input_data, JSAMPARRAY *output_data_ptr)
+{
+  my_upsample_ptr upsample = (my_upsample_ptr)cinfo->upsample;
+  JSAMPARRAY output_data = *output_data_ptr;
+  register JSAMPROW inptr, outptr;
+  register JSAMPLE invalue;
+  register int h;
+  JSAMPROW outend;
+  int h_expand, v_expand;
+  int inrow, outrow;
+
+  h_expand = upsample->h_expand[compptr->component_index];
+  v_expand = upsample->v_expand[compptr->component_index];
+
+  inrow = outrow = 0;
+  while (outrow < cinfo->max_v_samp_factor) {
+    /* Generate one output row with proper horizontal expansion */
+    inptr = input_data[inrow];
+    outptr = output_data[outrow];
+    outend = outptr + cinfo->output_width;
+    while (outptr < outend) {
+      invalue = *inptr++;       /* don't need GETJSAMPLE() here */
+      for (h = h_expand; h > 0; h--) {
+        *outptr++ = invalue;
+      }
+    }
+    /* Generate any additional output rows by duplicating the first one */
+    if (v_expand > 1) {
+      jcopy_sample_rows(output_data, outrow, output_data, outrow + 1,
+                        v_expand - 1, cinfo->output_width);
+    }
+    inrow++;
+    outrow += v_expand;
+  }
+}
+
+
+/*
+ * Fast processing for the common case of 2:1 horizontal and 1:1 vertical.
+ * It's still a box filter.
+ */
+
+METHODDEF(void)
+h2v1_upsample(j_decompress_ptr cinfo, jpeg_component_info *compptr,
+              JSAMPARRAY input_data, JSAMPARRAY *output_data_ptr)
+{
+  JSAMPARRAY output_data = *output_data_ptr;
+  register JSAMPROW inptr, outptr;
+  register JSAMPLE invalue;
+  JSAMPROW outend;
+  int inrow;
+
+  for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) {
+    inptr = input_data[inrow];
+    outptr = output_data[inrow];
+    outend = outptr + cinfo->output_width;
+    while (outptr < outend) {
+      invalue = *inptr++;       /* don't need GETJSAMPLE() here */
+      *outptr++ = invalue;
+      *outptr++ = invalue;
+    }
+  }
+}
+
+
+/*
+ * Fast processing for the common case of 2:1 horizontal and 2:1 vertical.
+ * It's still a box filter.
+ */
+
+METHODDEF(void)
+h2v2_upsample(j_decompress_ptr cinfo, jpeg_component_info *compptr,
+              JSAMPARRAY input_data, JSAMPARRAY *output_data_ptr)
+{
+  JSAMPARRAY output_data = *output_data_ptr;
+  register JSAMPROW inptr, outptr;
+  register JSAMPLE invalue;
+  JSAMPROW outend;
+  int inrow, outrow;
+
+  inrow = outrow = 0;
+  while (outrow < cinfo->max_v_samp_factor) {
+    inptr = input_data[inrow];
+    outptr = output_data[outrow];
+    outend = outptr + cinfo->output_width;
+    while (outptr < outend) {
+      invalue = *inptr++;       /* don't need GETJSAMPLE() here */
+      *outptr++ = invalue;
+      *outptr++ = invalue;
+    }
+    jcopy_sample_rows(output_data, outrow, output_data, outrow + 1, 1,
+                      cinfo->output_width);
+    inrow++;
+    outrow += 2;
+  }
+}
+
+
+/*
+ * Fancy processing for the common case of 2:1 horizontal and 1:1 vertical.
+ *
+ * The upsampling algorithm is linear interpolation between pixel centers,
+ * also known as a "triangle filter".  This is a good compromise between
+ * speed and visual quality.  The centers of the output pixels are 1/4 and 3/4
+ * of the way between input pixel centers.
+ *
+ * A note about the "bias" calculations: when rounding fractional values to
+ * integer, we do not want to always round 0.5 up to the next integer.
+ * If we did that, we'd introduce a noticeable bias towards larger values.
+ * Instead, this code is arranged so that 0.5 will be rounded up or down at
+ * alternate pixel locations (a simple ordered dither pattern).
+ */
+
+METHODDEF(void)
+h2v1_fancy_upsample(j_decompress_ptr cinfo, jpeg_component_info *compptr,
+                    JSAMPARRAY input_data, JSAMPARRAY *output_data_ptr)
+{
+  JSAMPARRAY output_data = *output_data_ptr;
+  register JSAMPROW inptr, outptr;
+  register int invalue;
+  register JDIMENSION colctr;
+  int inrow;
+
+  for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) {
+    inptr = input_data[inrow];
+    outptr = output_data[inrow];
+    /* Special case for first column */
+    invalue = GETJSAMPLE(*inptr++);
+    *outptr++ = (JSAMPLE)invalue;
+    *outptr++ = (JSAMPLE)((invalue * 3 + GETJSAMPLE(*inptr) + 2) >> 2);
+
+    for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) {
+      /* General case: 3/4 * nearer pixel + 1/4 * further pixel */
+      invalue = GETJSAMPLE(*inptr++) * 3;
+      *outptr++ = (JSAMPLE)((invalue + GETJSAMPLE(inptr[-2]) + 1) >> 2);
+      *outptr++ = (JSAMPLE)((invalue + GETJSAMPLE(*inptr) + 2) >> 2);
+    }
+
+    /* Special case for last column */
+    invalue = GETJSAMPLE(*inptr);
+    *outptr++ = (JSAMPLE)((invalue * 3 + GETJSAMPLE(inptr[-1]) + 1) >> 2);
+    *outptr++ = (JSAMPLE)invalue;
+  }
+}
+
+
+/*
+ * Fancy processing for 1:1 horizontal and 2:1 vertical (4:4:0 subsampling).
+ *
+ * This is a less common case, but it can be encountered when losslessly
+ * rotating/transposing a JPEG file that uses 4:2:2 chroma subsampling.
+ */
+
+METHODDEF(void)
+h1v2_fancy_upsample(j_decompress_ptr cinfo, jpeg_component_info *compptr,
+                    JSAMPARRAY input_data, JSAMPARRAY *output_data_ptr)
+{
+  JSAMPARRAY output_data = *output_data_ptr;
+  JSAMPROW inptr0, inptr1, outptr;
+#if BITS_IN_JSAMPLE == 8
+  int thiscolsum, bias;
+#else
+  JLONG thiscolsum, bias;
+#endif
+  JDIMENSION colctr;
+  int inrow, outrow, v;
+
+  inrow = outrow = 0;
+  while (outrow < cinfo->max_v_samp_factor) {
+    for (v = 0; v < 2; v++) {
+      /* inptr0 points to nearest input row, inptr1 points to next nearest */
+      inptr0 = input_data[inrow];
+      if (v == 0) {             /* next nearest is row above */
+        inptr1 = input_data[inrow - 1];
+        bias = 1;
+      } else {                  /* next nearest is row below */
+        inptr1 = input_data[inrow + 1];
+        bias = 2;
+      }
+      outptr = output_data[outrow++];
+
+      for (colctr = 0; colctr < compptr->downsampled_width; colctr++) {
+        thiscolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++);
+        *outptr++ = (JSAMPLE)((thiscolsum + bias) >> 2);
+      }
+    }
+    inrow++;
+  }
+}
+
+
+/*
+ * Fancy processing for the common case of 2:1 horizontal and 2:1 vertical.
+ * Again a triangle filter; see comments for h2v1 case, above.
+ *
+ * It is OK for us to reference the adjacent input rows because we demanded
+ * context from the main buffer controller (see initialization code).
+ */
+
+METHODDEF(void)
+h2v2_fancy_upsample(j_decompress_ptr cinfo, jpeg_component_info *compptr,
+                    JSAMPARRAY input_data, JSAMPARRAY *output_data_ptr)
+{
+  JSAMPARRAY output_data = *output_data_ptr;
+  register JSAMPROW inptr0, inptr1, outptr;
+#if BITS_IN_JSAMPLE == 8
+  register int thiscolsum, lastcolsum, nextcolsum;
+#else
+  register JLONG thiscolsum, lastcolsum, nextcolsum;
+#endif
+  register JDIMENSION colctr;
+  int inrow, outrow, v;
+
+  inrow = outrow = 0;
+  while (outrow < cinfo->max_v_samp_factor) {
+    for (v = 0; v < 2; v++) {
+      /* inptr0 points to nearest input row, inptr1 points to next nearest */
+      inptr0 = input_data[inrow];
+      if (v == 0)               /* next nearest is row above */
+        inptr1 = input_data[inrow - 1];
+      else                      /* next nearest is row below */
+        inptr1 = input_data[inrow + 1];
+      outptr = output_data[outrow++];
+
+      /* Special case for first column */
+      thiscolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++);
+      nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++);
+      *outptr++ = (JSAMPLE)((thiscolsum * 4 + 8) >> 4);
+      *outptr++ = (JSAMPLE)((thiscolsum * 3 + nextcolsum + 7) >> 4);
+      lastcolsum = thiscolsum;  thiscolsum = nextcolsum;
+
+      for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) {
+        /* General case: 3/4 * nearer pixel + 1/4 * further pixel in each */
+        /* dimension, thus 9/16, 3/16, 3/16, 1/16 overall */
+        nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++);
+        *outptr++ = (JSAMPLE)((thiscolsum * 3 + lastcolsum + 8) >> 4);
+        *outptr++ = (JSAMPLE)((thiscolsum * 3 + nextcolsum + 7) >> 4);
+        lastcolsum = thiscolsum;  thiscolsum = nextcolsum;
+      }
+
+      /* Special case for last column */
+      *outptr++ = (JSAMPLE)((thiscolsum * 3 + lastcolsum + 8) >> 4);
+      *outptr++ = (JSAMPLE)((thiscolsum * 4 + 7) >> 4);
+    }
+    inrow++;
+  }
+}
+
+
+/*
+ * Module initialization routine for upsampling.
+ */
+
+GLOBAL(void)
+jinit_upsampler(j_decompress_ptr cinfo)
+{
+  my_upsample_ptr upsample;
+  int ci;
+  jpeg_component_info *compptr;
+  boolean need_buffer, do_fancy;
+  int h_in_group, v_in_group, h_out_group, v_out_group;
+
+  if (!cinfo->master->jinit_upsampler_no_alloc) {
+    upsample = (my_upsample_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                  sizeof(my_upsampler));
+    cinfo->upsample = (struct jpeg_upsampler *)upsample;
+    upsample->pub.start_pass = start_pass_upsample;
+    upsample->pub.upsample = sep_upsample;
+    upsample->pub.need_context_rows = FALSE; /* until we find out differently */
+  } else
+    upsample = (my_upsample_ptr)cinfo->upsample;
+
+  if (cinfo->CCIR601_sampling)  /* this isn't supported */
+    ERREXIT(cinfo, JERR_CCIR601_NOTIMPL);
+
+  /* jdmainct.c doesn't support context rows when min_DCT_scaled_size = 1,
+   * so don't ask for it.
+   */
+  do_fancy = cinfo->do_fancy_upsampling && cinfo->_min_DCT_scaled_size > 1;
+
+  /* Verify we can handle the sampling factors, select per-component methods,
+   * and create storage as needed.
+   */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Compute size of an "input group" after IDCT scaling.  This many samples
+     * are to be converted to max_h_samp_factor * max_v_samp_factor pixels.
+     */
+    h_in_group = (compptr->h_samp_factor * compptr->_DCT_scaled_size) /
+                 cinfo->_min_DCT_scaled_size;
+    v_in_group = (compptr->v_samp_factor * compptr->_DCT_scaled_size) /
+                 cinfo->_min_DCT_scaled_size;
+    h_out_group = cinfo->max_h_samp_factor;
+    v_out_group = cinfo->max_v_samp_factor;
+    upsample->rowgroup_height[ci] = v_in_group; /* save for use later */
+    need_buffer = TRUE;
+    if (!compptr->component_needed) {
+      /* Don't bother to upsample an uninteresting component. */
+      upsample->methods[ci] = noop_upsample;
+      need_buffer = FALSE;
+    } else if (h_in_group == h_out_group && v_in_group == v_out_group) {
+      /* Fullsize components can be processed without any work. */
+      upsample->methods[ci] = fullsize_upsample;
+      need_buffer = FALSE;
+    } else if (h_in_group * 2 == h_out_group && v_in_group == v_out_group) {
+      /* Special cases for 2h1v upsampling */
+      if (do_fancy && compptr->downsampled_width > 2) {
+        if (jsimd_can_h2v1_fancy_upsample())
+          upsample->methods[ci] = jsimd_h2v1_fancy_upsample;
+        else
+          upsample->methods[ci] = h2v1_fancy_upsample;
+      } else {
+        if (jsimd_can_h2v1_upsample())
+          upsample->methods[ci] = jsimd_h2v1_upsample;
+        else
+          upsample->methods[ci] = h2v1_upsample;
+      }
+    } else if (h_in_group == h_out_group &&
+               v_in_group * 2 == v_out_group && do_fancy) {
+      /* Non-fancy upsampling is handled by the generic method */
+      upsample->methods[ci] = h1v2_fancy_upsample;
+      upsample->pub.need_context_rows = TRUE;
+    } else if (h_in_group * 2 == h_out_group &&
+               v_in_group * 2 == v_out_group) {
+      /* Special cases for 2h2v upsampling */
+      if (do_fancy && compptr->downsampled_width > 2) {
+        if (jsimd_can_h2v2_fancy_upsample())
+          upsample->methods[ci] = jsimd_h2v2_fancy_upsample;
+        else
+          upsample->methods[ci] = h2v2_fancy_upsample;
+        upsample->pub.need_context_rows = TRUE;
+      } else {
+        if (jsimd_can_h2v2_upsample())
+          upsample->methods[ci] = jsimd_h2v2_upsample;
+        else
+          upsample->methods[ci] = h2v2_upsample;
+      }
+    } else if ((h_out_group % h_in_group) == 0 &&
+               (v_out_group % v_in_group) == 0) {
+      /* Generic integral-factors upsampling method */
+#if defined(__mips__)
+      if (jsimd_can_int_upsample())
+        upsample->methods[ci] = jsimd_int_upsample;
+      else
+#endif
+        upsample->methods[ci] = int_upsample;
+      upsample->h_expand[ci] = (UINT8)(h_out_group / h_in_group);
+      upsample->v_expand[ci] = (UINT8)(v_out_group / v_in_group);
+    } else
+      ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL);
+    if (need_buffer && !cinfo->master->jinit_upsampler_no_alloc) {
+      upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray)
+        ((j_common_ptr)cinfo, JPOOL_IMAGE,
+         (JDIMENSION)jround_up((long)cinfo->output_width,
+                               (long)cinfo->max_h_samp_factor),
+         (JDIMENSION)cinfo->max_v_samp_factor);
+    }
+  }
+}

data/epeg/vendor/libjpeg-turbo-2.0.4/jdsample.h

@@ -0,0 +1,50 @@
+/*
+ * jdsample.h
+ *
+ * This file was part of the Independent JPEG Group's software:
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * For conditions of distribution and use, see the accompanying README.ijg
+ * file.
+ */
+
+#define JPEG_INTERNALS
+#include "jpeglib.h"
+
+
+/* Pointer to routine to upsample a single component */
+typedef void (*upsample1_ptr) (j_decompress_ptr cinfo,
+                               jpeg_component_info *compptr,
+                               JSAMPARRAY input_data,
+                               JSAMPARRAY *output_data_ptr);
+
+/* Private subobject */
+
+typedef struct {
+  struct jpeg_upsampler pub;    /* public fields */
+
+  /* Color conversion buffer.  When using separate upsampling and color
+   * conversion steps, this buffer holds one upsampled row group until it
+   * has been color converted and output.
+   * Note: we do not allocate any storage for component(s) which are full-size,
+   * ie do not need rescaling.  The corresponding entry of color_buf[] is
+   * simply set to point to the input data array, thereby avoiding copying.
+   */
+  JSAMPARRAY color_buf[MAX_COMPONENTS];
+
+  /* Per-component upsampling method pointers */
+  upsample1_ptr methods[MAX_COMPONENTS];
+
+  int next_row_out;             /* counts rows emitted from color_buf */
+  JDIMENSION rows_to_go;        /* counts rows remaining in image */
+
+  /* Height of an input row group for each component. */
+  int rowgroup_height[MAX_COMPONENTS];
+
+  /* These arrays save pixel expansion factors so that int_expand need not
+   * recompute them each time.  They are unused for other upsampling methods.
+   */
+  UINT8 h_expand[MAX_COMPONENTS];
+  UINT8 v_expand[MAX_COMPONENTS];
+} my_upsampler;
+
+typedef my_upsampler *my_upsample_ptr;