epeg 1.0

data/epeg/vendor/libjpeg-turbo-2.0.4/jdcoefct.c

@@ -0,0 +1,692 @@
+/*
+ * jdcoefct.c
+ *
+ * This file was part of the Independent JPEG Group's software:
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * libjpeg-turbo Modifications:
+ * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
+ * Copyright (C) 2010, 2015-2016, D. R. Commander.
+ * Copyright (C) 2015, Google, Inc.
+ * For conditions of distribution and use, see the accompanying README.ijg
+ * file.
+ *
+ * This file contains the coefficient buffer controller for decompression.
+ * This controller is the top level of the JPEG decompressor proper.
+ * The coefficient buffer lies between entropy decoding and inverse-DCT steps.
+ *
+ * In buffered-image mode, this controller is the interface between
+ * input-oriented processing and output-oriented processing.
+ * Also, the input side (only) is used when reading a file for transcoding.
+ */
+
+#include "jinclude.h"
+#include "jdcoefct.h"
+#include "jpegcomp.h"
+
+
+/* Forward declarations */
+METHODDEF(int) decompress_onepass(j_decompress_ptr cinfo,
+                                  JSAMPIMAGE output_buf);
+#ifdef D_MULTISCAN_FILES_SUPPORTED
+METHODDEF(int) decompress_data(j_decompress_ptr cinfo, JSAMPIMAGE output_buf);
+#endif
+#ifdef BLOCK_SMOOTHING_SUPPORTED
+LOCAL(boolean) smoothing_ok(j_decompress_ptr cinfo);
+METHODDEF(int) decompress_smooth_data(j_decompress_ptr cinfo,
+                                      JSAMPIMAGE output_buf);
+#endif
+
+
+/*
+ * Initialize for an input processing pass.
+ */
+
+METHODDEF(void)
+start_input_pass(j_decompress_ptr cinfo)
+{
+  cinfo->input_iMCU_row = 0;
+  start_iMCU_row(cinfo);
+}
+
+
+/*
+ * Initialize for an output processing pass.
+ */
+
+METHODDEF(void)
+start_output_pass(j_decompress_ptr cinfo)
+{
+#ifdef BLOCK_SMOOTHING_SUPPORTED
+  my_coef_ptr coef = (my_coef_ptr)cinfo->coef;
+
+  /* If multipass, check to see whether to use block smoothing on this pass */
+  if (coef->pub.coef_arrays != NULL) {
+    if (cinfo->do_block_smoothing && smoothing_ok(cinfo))
+      coef->pub.decompress_data = decompress_smooth_data;
+    else
+      coef->pub.decompress_data = decompress_data;
+  }
+#endif
+  cinfo->output_iMCU_row = 0;
+}
+
+
+/*
+ * Decompress and return some data in the single-pass case.
+ * Always attempts to emit one fully interleaved MCU row ("iMCU" row).
+ * Input and output must run in lockstep since we have only a one-MCU buffer.
+ * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED.
+ *
+ * NB: output_buf contains a plane for each component in image,
+ * which we index according to the component's SOF position.
+ */
+
+METHODDEF(int)
+decompress_onepass(j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
+{
+  my_coef_ptr coef = (my_coef_ptr)cinfo->coef;
+  JDIMENSION MCU_col_num;       /* index of current MCU within row */
+  JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1;
+  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
+  int blkn, ci, xindex, yindex, yoffset, useful_width;
+  JSAMPARRAY output_ptr;
+  JDIMENSION start_col, output_col;
+  jpeg_component_info *compptr;
+  inverse_DCT_method_ptr inverse_DCT;
+
+  /* Loop to process as much as one whole iMCU row */
+  for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
+       yoffset++) {
+    for (MCU_col_num = coef->MCU_ctr; MCU_col_num <= last_MCU_col;
+         MCU_col_num++) {
+      /* Try to fetch an MCU.  Entropy decoder expects buffer to be zeroed. */
+      jzero_far((void *)coef->MCU_buffer[0],
+                (size_t)(cinfo->blocks_in_MCU * sizeof(JBLOCK)));
+      if (!(*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) {
+        /* Suspension forced; update state counters and exit */
+        coef->MCU_vert_offset = yoffset;
+        coef->MCU_ctr = MCU_col_num;
+        return JPEG_SUSPENDED;
+      }
+
+      /* Only perform the IDCT on blocks that are contained within the desired
+       * cropping region.
+       */
+      if (MCU_col_num >= cinfo->master->first_iMCU_col &&
+          MCU_col_num <= cinfo->master->last_iMCU_col) {
+        /* Determine where data should go in output_buf and do the IDCT thing.
+         * We skip dummy blocks at the right and bottom edges (but blkn gets
+         * incremented past them!).  Note the inner loop relies on having
+         * allocated the MCU_buffer[] blocks sequentially.
+         */
+        blkn = 0;               /* index of current DCT block within MCU */
+        for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+          compptr = cinfo->cur_comp_info[ci];
+          /* Don't bother to IDCT an uninteresting component. */
+          if (!compptr->component_needed) {
+            blkn += compptr->MCU_blocks;
+            continue;
+          }
+          inverse_DCT = cinfo->idct->inverse_DCT[compptr->component_index];
+          useful_width = (MCU_col_num < last_MCU_col) ?
+                         compptr->MCU_width : compptr->last_col_width;
+          output_ptr = output_buf[compptr->component_index] +
+                       yoffset * compptr->_DCT_scaled_size;
+          start_col = (MCU_col_num - cinfo->master->first_iMCU_col) *
+                      compptr->MCU_sample_width;
+          for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
+            if (cinfo->input_iMCU_row < last_iMCU_row ||
+                yoffset + yindex < compptr->last_row_height) {
+              output_col = start_col;
+              for (xindex = 0; xindex < useful_width; xindex++) {
+                (*inverse_DCT) (cinfo, compptr,
+                                (JCOEFPTR)coef->MCU_buffer[blkn + xindex],
+                                output_ptr, output_col);
+                output_col += compptr->_DCT_scaled_size;
+              }
+            }
+            blkn += compptr->MCU_width;
+            output_ptr += compptr->_DCT_scaled_size;
+          }
+        }
+      }
+    }
+    /* Completed an MCU row, but perhaps not an iMCU row */
+    coef->MCU_ctr = 0;
+  }
+  /* Completed the iMCU row, advance counters for next one */
+  cinfo->output_iMCU_row++;
+  if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) {
+    start_iMCU_row(cinfo);
+    return JPEG_ROW_COMPLETED;
+  }
+  /* Completed the scan */
+  (*cinfo->inputctl->finish_input_pass) (cinfo);
+  return JPEG_SCAN_COMPLETED;
+}
+
+
+/*
+ * Dummy consume-input routine for single-pass operation.
+ */
+
+METHODDEF(int)
+dummy_consume_data(j_decompress_ptr cinfo)
+{
+  return JPEG_SUSPENDED;        /* Always indicate nothing was done */
+}
+
+
+#ifdef D_MULTISCAN_FILES_SUPPORTED
+
+/*
+ * Consume input data and store it in the full-image coefficient buffer.
+ * We read as much as one fully interleaved MCU row ("iMCU" row) per call,
+ * ie, v_samp_factor block rows for each component in the scan.
+ * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED.
+ */
+
+METHODDEF(int)
+consume_data(j_decompress_ptr cinfo)
+{
+  my_coef_ptr coef = (my_coef_ptr)cinfo->coef;
+  JDIMENSION MCU_col_num;       /* index of current MCU within row */
+  int blkn, ci, xindex, yindex, yoffset;
+  JDIMENSION start_col;
+  JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN];
+  JBLOCKROW buffer_ptr;
+  jpeg_component_info *compptr;
+
+  /* Align the virtual buffers for the components used in this scan. */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    buffer[ci] = (*cinfo->mem->access_virt_barray)
+      ((j_common_ptr)cinfo, coef->whole_image[compptr->component_index],
+       cinfo->input_iMCU_row * compptr->v_samp_factor,
+       (JDIMENSION)compptr->v_samp_factor, TRUE);
+    /* Note: entropy decoder expects buffer to be zeroed,
+     * but this is handled automatically by the memory manager
+     * because we requested a pre-zeroed array.
+     */
+  }
+
+  /* Loop to process one whole iMCU row */
+  for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
+       yoffset++) {
+    for (MCU_col_num = coef->MCU_ctr; MCU_col_num < cinfo->MCUs_per_row;
+         MCU_col_num++) {
+      /* Construct list of pointers to DCT blocks belonging to this MCU */
+      blkn = 0;                 /* index of current DCT block within MCU */
+      for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+        compptr = cinfo->cur_comp_info[ci];
+        start_col = MCU_col_num * compptr->MCU_width;
+        for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
+          buffer_ptr = buffer[ci][yindex + yoffset] + start_col;
+          for (xindex = 0; xindex < compptr->MCU_width; xindex++) {
+            coef->MCU_buffer[blkn++] = buffer_ptr++;
+          }
+        }
+      }
+      /* Try to fetch the MCU. */
+      if (!(*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) {
+        /* Suspension forced; update state counters and exit */
+        coef->MCU_vert_offset = yoffset;
+        coef->MCU_ctr = MCU_col_num;
+        return JPEG_SUSPENDED;
+      }
+    }
+    /* Completed an MCU row, but perhaps not an iMCU row */
+    coef->MCU_ctr = 0;
+  }
+  /* Completed the iMCU row, advance counters for next one */
+  if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) {
+    start_iMCU_row(cinfo);
+    return JPEG_ROW_COMPLETED;
+  }
+  /* Completed the scan */
+  (*cinfo->inputctl->finish_input_pass) (cinfo);
+  return JPEG_SCAN_COMPLETED;
+}
+
+
+/*
+ * Decompress and return some data in the multi-pass case.
+ * Always attempts to emit one fully interleaved MCU row ("iMCU" row).
+ * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED.
+ *
+ * NB: output_buf contains a plane for each component in image.
+ */
+
+METHODDEF(int)
+decompress_data(j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
+{
+  my_coef_ptr coef = (my_coef_ptr)cinfo->coef;
+  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
+  JDIMENSION block_num;
+  int ci, block_row, block_rows;
+  JBLOCKARRAY buffer;
+  JBLOCKROW buffer_ptr;
+  JSAMPARRAY output_ptr;
+  JDIMENSION output_col;
+  jpeg_component_info *compptr;
+  inverse_DCT_method_ptr inverse_DCT;
+
+  /* Force some input to be done if we are getting ahead of the input. */
+  while (cinfo->input_scan_number < cinfo->output_scan_number ||
+         (cinfo->input_scan_number == cinfo->output_scan_number &&
+          cinfo->input_iMCU_row <= cinfo->output_iMCU_row)) {
+    if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED)
+      return JPEG_SUSPENDED;
+  }
+
+  /* OK, output from the virtual arrays. */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Don't bother to IDCT an uninteresting component. */
+    if (!compptr->component_needed)
+      continue;
+    /* Align the virtual buffer for this component. */
+    buffer = (*cinfo->mem->access_virt_barray)
+      ((j_common_ptr)cinfo, coef->whole_image[ci],
+       cinfo->output_iMCU_row * compptr->v_samp_factor,
+       (JDIMENSION)compptr->v_samp_factor, FALSE);
+    /* Count non-dummy DCT block rows in this iMCU row. */
+    if (cinfo->output_iMCU_row < last_iMCU_row)
+      block_rows = compptr->v_samp_factor;
+    else {
+      /* NB: can't use last_row_height here; it is input-side-dependent! */
+      block_rows = (int)(compptr->height_in_blocks % compptr->v_samp_factor);
+      if (block_rows == 0) block_rows = compptr->v_samp_factor;
+    }
+    inverse_DCT = cinfo->idct->inverse_DCT[ci];
+    output_ptr = output_buf[ci];
+    /* Loop over all DCT blocks to be processed. */
+    for (block_row = 0; block_row < block_rows; block_row++) {
+      buffer_ptr = buffer[block_row] + cinfo->master->first_MCU_col[ci];
+      output_col = 0;
+      for (block_num = cinfo->master->first_MCU_col[ci];
+           block_num <= cinfo->master->last_MCU_col[ci]; block_num++) {
+        (*inverse_DCT) (cinfo, compptr, (JCOEFPTR)buffer_ptr, output_ptr,
+                        output_col);
+        buffer_ptr++;
+        output_col += compptr->_DCT_scaled_size;
+      }
+      output_ptr += compptr->_DCT_scaled_size;
+    }
+  }
+
+  if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows)
+    return JPEG_ROW_COMPLETED;
+  return JPEG_SCAN_COMPLETED;
+}
+
+#endif /* D_MULTISCAN_FILES_SUPPORTED */
+
+
+#ifdef BLOCK_SMOOTHING_SUPPORTED
+
+/*
+ * This code applies interblock smoothing as described by section K.8
+ * of the JPEG standard: the first 5 AC coefficients are estimated from
+ * the DC values of a DCT block and its 8 neighboring blocks.
+ * We apply smoothing only for progressive JPEG decoding, and only if
+ * the coefficients it can estimate are not yet known to full precision.
+ */
+
+/* Natural-order array positions of the first 5 zigzag-order coefficients */
+#define Q01_POS  1
+#define Q10_POS  8
+#define Q20_POS  16
+#define Q11_POS  9
+#define Q02_POS  2
+
+/*
+ * Determine whether block smoothing is applicable and safe.
+ * We also latch the current states of the coef_bits[] entries for the
+ * AC coefficients; otherwise, if the input side of the decompressor
+ * advances into a new scan, we might think the coefficients are known
+ * more accurately than they really are.
+ */
+
+LOCAL(boolean)
+smoothing_ok(j_decompress_ptr cinfo)
+{
+  my_coef_ptr coef = (my_coef_ptr)cinfo->coef;
+  boolean smoothing_useful = FALSE;
+  int ci, coefi;
+  jpeg_component_info *compptr;
+  JQUANT_TBL *qtable;
+  int *coef_bits;
+  int *coef_bits_latch;
+
+  if (!cinfo->progressive_mode || cinfo->coef_bits == NULL)
+    return FALSE;
+
+  /* Allocate latch area if not already done */
+  if (coef->coef_bits_latch == NULL)
+    coef->coef_bits_latch = (int *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                  cinfo->num_components *
+                                  (SAVED_COEFS * sizeof(int)));
+  coef_bits_latch = coef->coef_bits_latch;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* All components' quantization values must already be latched. */
+    if ((qtable = compptr->quant_table) == NULL)
+      return FALSE;
+    /* Verify DC & first 5 AC quantizers are nonzero to avoid zero-divide. */
+    if (qtable->quantval[0] == 0 ||
+        qtable->quantval[Q01_POS] == 0 ||
+        qtable->quantval[Q10_POS] == 0 ||
+        qtable->quantval[Q20_POS] == 0 ||
+        qtable->quantval[Q11_POS] == 0 ||
+        qtable->quantval[Q02_POS] == 0)
+      return FALSE;
+    /* DC values must be at least partly known for all components. */
+    coef_bits = cinfo->coef_bits[ci];
+    if (coef_bits[0] < 0)
+      return FALSE;
+    /* Block smoothing is helpful if some AC coefficients remain inaccurate. */
+    for (coefi = 1; coefi <= 5; coefi++) {
+      coef_bits_latch[coefi] = coef_bits[coefi];
+      if (coef_bits[coefi] != 0)
+        smoothing_useful = TRUE;
+    }
+    coef_bits_latch += SAVED_COEFS;
+  }
+
+  return smoothing_useful;
+}
+
+
+/*
+ * Variant of decompress_data for use when doing block smoothing.
+ */
+
+METHODDEF(int)
+decompress_smooth_data(j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
+{
+  my_coef_ptr coef = (my_coef_ptr)cinfo->coef;
+  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
+  JDIMENSION block_num, last_block_column;
+  int ci, block_row, block_rows, access_rows;
+  JBLOCKARRAY buffer;
+  JBLOCKROW buffer_ptr, prev_block_row, next_block_row;
+  JSAMPARRAY output_ptr;
+  JDIMENSION output_col;
+  jpeg_component_info *compptr;
+  inverse_DCT_method_ptr inverse_DCT;
+  boolean first_row, last_row;
+  JCOEF *workspace;
+  int *coef_bits;
+  JQUANT_TBL *quanttbl;
+  JLONG Q00, Q01, Q02, Q10, Q11, Q20, num;
+  int DC1, DC2, DC3, DC4, DC5, DC6, DC7, DC8, DC9;
+  int Al, pred;
+
+  /* Keep a local variable to avoid looking it up more than once */
+  workspace = coef->workspace;
+
+  /* Force some input to be done if we are getting ahead of the input. */
+  while (cinfo->input_scan_number <= cinfo->output_scan_number &&
+         !cinfo->inputctl->eoi_reached) {
+    if (cinfo->input_scan_number == cinfo->output_scan_number) {
+      /* If input is working on current scan, we ordinarily want it to
+       * have completed the current row.  But if input scan is DC,
+       * we want it to keep one row ahead so that next block row's DC
+       * values are up to date.
+       */
+      JDIMENSION delta = (cinfo->Ss == 0) ? 1 : 0;
+      if (cinfo->input_iMCU_row > cinfo->output_iMCU_row + delta)
+        break;
+    }
+    if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED)
+      return JPEG_SUSPENDED;
+  }
+
+  /* OK, output from the virtual arrays. */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Don't bother to IDCT an uninteresting component. */
+    if (!compptr->component_needed)
+      continue;
+    /* Count non-dummy DCT block rows in this iMCU row. */
+    if (cinfo->output_iMCU_row < last_iMCU_row) {
+      block_rows = compptr->v_samp_factor;
+      access_rows = block_rows * 2; /* this and next iMCU row */
+      last_row = FALSE;
+    } else {
+      /* NB: can't use last_row_height here; it is input-side-dependent! */
+      block_rows = (int)(compptr->height_in_blocks % compptr->v_samp_factor);
+      if (block_rows == 0) block_rows = compptr->v_samp_factor;
+      access_rows = block_rows; /* this iMCU row only */
+      last_row = TRUE;
+    }
+    /* Align the virtual buffer for this component. */
+    if (cinfo->output_iMCU_row > 0) {
+      access_rows += compptr->v_samp_factor; /* prior iMCU row too */
+      buffer = (*cinfo->mem->access_virt_barray)
+        ((j_common_ptr)cinfo, coef->whole_image[ci],
+         (cinfo->output_iMCU_row - 1) * compptr->v_samp_factor,
+         (JDIMENSION)access_rows, FALSE);
+      buffer += compptr->v_samp_factor; /* point to current iMCU row */
+      first_row = FALSE;
+    } else {
+      buffer = (*cinfo->mem->access_virt_barray)
+        ((j_common_ptr)cinfo, coef->whole_image[ci],
+         (JDIMENSION)0, (JDIMENSION)access_rows, FALSE);
+      first_row = TRUE;
+    }
+    /* Fetch component-dependent info */
+    coef_bits = coef->coef_bits_latch + (ci * SAVED_COEFS);
+    quanttbl = compptr->quant_table;
+    Q00 = quanttbl->quantval[0];
+    Q01 = quanttbl->quantval[Q01_POS];
+    Q10 = quanttbl->quantval[Q10_POS];
+    Q20 = quanttbl->quantval[Q20_POS];
+    Q11 = quanttbl->quantval[Q11_POS];
+    Q02 = quanttbl->quantval[Q02_POS];
+    inverse_DCT = cinfo->idct->inverse_DCT[ci];
+    output_ptr = output_buf[ci];
+    /* Loop over all DCT blocks to be processed. */
+    for (block_row = 0; block_row < block_rows; block_row++) {
+      buffer_ptr = buffer[block_row] + cinfo->master->first_MCU_col[ci];
+      if (first_row && block_row == 0)
+        prev_block_row = buffer_ptr;
+      else
+        prev_block_row = buffer[block_row - 1];
+      if (last_row && block_row == block_rows - 1)
+        next_block_row = buffer_ptr;
+      else
+        next_block_row = buffer[block_row + 1];
+      /* We fetch the surrounding DC values using a sliding-register approach.
+       * Initialize all nine here so as to do the right thing on narrow pics.
+       */
+      DC1 = DC2 = DC3 = (int)prev_block_row[0][0];
+      DC4 = DC5 = DC6 = (int)buffer_ptr[0][0];
+      DC7 = DC8 = DC9 = (int)next_block_row[0][0];
+      output_col = 0;
+      last_block_column = compptr->width_in_blocks - 1;
+      for (block_num = cinfo->master->first_MCU_col[ci];
+           block_num <= cinfo->master->last_MCU_col[ci]; block_num++) {
+        /* Fetch current DCT block into workspace so we can modify it. */
+        jcopy_block_row(buffer_ptr, (JBLOCKROW)workspace, (JDIMENSION)1);
+        /* Update DC values */
+        if (block_num < last_block_column) {
+          DC3 = (int)prev_block_row[1][0];
+          DC6 = (int)buffer_ptr[1][0];
+          DC9 = (int)next_block_row[1][0];
+        }
+        /* Compute coefficient estimates per K.8.
+         * An estimate is applied only if coefficient is still zero,
+         * and is not known to be fully accurate.
+         */
+        /* AC01 */
+        if ((Al = coef_bits[1]) != 0 && workspace[1] == 0) {
+          num = 36 * Q00 * (DC4 - DC6);
+          if (num >= 0) {
+            pred = (int)(((Q01 << 7) + num) / (Q01 << 8));
+            if (Al > 0 && pred >= (1 << Al))
+              pred = (1 << Al) - 1;
+          } else {
+            pred = (int)(((Q01 << 7) - num) / (Q01 << 8));
+            if (Al > 0 && pred >= (1 << Al))
+              pred = (1 << Al) - 1;
+            pred = -pred;
+          }
+          workspace[1] = (JCOEF)pred;
+        }
+        /* AC10 */
+        if ((Al = coef_bits[2]) != 0 && workspace[8] == 0) {
+          num = 36 * Q00 * (DC2 - DC8);
+          if (num >= 0) {
+            pred = (int)(((Q10 << 7) + num) / (Q10 << 8));
+            if (Al > 0 && pred >= (1 << Al))
+              pred = (1 << Al) - 1;
+          } else {
+            pred = (int)(((Q10 << 7) - num) / (Q10 << 8));
+            if (Al > 0 && pred >= (1 << Al))
+              pred = (1 << Al) - 1;
+            pred = -pred;
+          }
+          workspace[8] = (JCOEF)pred;
+        }
+        /* AC20 */
+        if ((Al = coef_bits[3]) != 0 && workspace[16] == 0) {
+          num = 9 * Q00 * (DC2 + DC8 - 2 * DC5);
+          if (num >= 0) {
+            pred = (int)(((Q20 << 7) + num) / (Q20 << 8));
+            if (Al > 0 && pred >= (1 << Al))
+              pred = (1 << Al) - 1;
+          } else {
+            pred = (int)(((Q20 << 7) - num) / (Q20 << 8));
+            if (Al > 0 && pred >= (1 << Al))
+              pred = (1 << Al) - 1;
+            pred = -pred;
+          }
+          workspace[16] = (JCOEF)pred;
+        }
+        /* AC11 */
+        if ((Al = coef_bits[4]) != 0 && workspace[9] == 0) {
+          num = 5 * Q00 * (DC1 - DC3 - DC7 + DC9);
+          if (num >= 0) {
+            pred = (int)(((Q11 << 7) + num) / (Q11 << 8));
+            if (Al > 0 && pred >= (1 << Al))
+              pred = (1 << Al) - 1;
+          } else {
+            pred = (int)(((Q11 << 7) - num) / (Q11 << 8));
+            if (Al > 0 && pred >= (1 << Al))
+              pred = (1 << Al) - 1;
+            pred = -pred;
+          }
+          workspace[9] = (JCOEF)pred;
+        }
+        /* AC02 */
+        if ((Al = coef_bits[5]) != 0 && workspace[2] == 0) {
+          num = 9 * Q00 * (DC4 + DC6 - 2 * DC5);
+          if (num >= 0) {
+            pred = (int)(((Q02 << 7) + num) / (Q02 << 8));
+            if (Al > 0 && pred >= (1 << Al))
+              pred = (1 << Al) - 1;
+          } else {
+            pred = (int)(((Q02 << 7) - num) / (Q02 << 8));
+            if (Al > 0 && pred >= (1 << Al))
+              pred = (1 << Al) - 1;
+            pred = -pred;
+          }
+          workspace[2] = (JCOEF)pred;
+        }
+        /* OK, do the IDCT */
+        (*inverse_DCT) (cinfo, compptr, (JCOEFPTR)workspace, output_ptr,
+                        output_col);
+        /* Advance for next column */
+        DC1 = DC2;  DC2 = DC3;
+        DC4 = DC5;  DC5 = DC6;
+        DC7 = DC8;  DC8 = DC9;
+        buffer_ptr++, prev_block_row++, next_block_row++;
+        output_col += compptr->_DCT_scaled_size;
+      }
+      output_ptr += compptr->_DCT_scaled_size;
+    }
+  }
+
+  if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows)
+    return JPEG_ROW_COMPLETED;
+  return JPEG_SCAN_COMPLETED;
+}
+
+#endif /* BLOCK_SMOOTHING_SUPPORTED */
+
+
+/*
+ * Initialize coefficient buffer controller.
+ */
+
+GLOBAL(void)
+jinit_d_coef_controller(j_decompress_ptr cinfo, boolean need_full_buffer)
+{
+  my_coef_ptr coef;
+
+  coef = (my_coef_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                sizeof(my_coef_controller));
+  cinfo->coef = (struct jpeg_d_coef_controller *)coef;
+  coef->pub.start_input_pass = start_input_pass;
+  coef->pub.start_output_pass = start_output_pass;
+#ifdef BLOCK_SMOOTHING_SUPPORTED
+  coef->coef_bits_latch = NULL;
+#endif
+
+  /* Create the coefficient buffer. */
+  if (need_full_buffer) {
+#ifdef D_MULTISCAN_FILES_SUPPORTED
+    /* Allocate a full-image virtual array for each component, */
+    /* padded to a multiple of samp_factor DCT blocks in each direction. */
+    /* Note we ask for a pre-zeroed array. */
+    int ci, access_rows;
+    jpeg_component_info *compptr;
+
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+         ci++, compptr++) {
+      access_rows = compptr->v_samp_factor;
+#ifdef BLOCK_SMOOTHING_SUPPORTED
+      /* If block smoothing could be used, need a bigger window */
+      if (cinfo->progressive_mode)
+        access_rows *= 3;
+#endif
+      coef->whole_image[ci] = (*cinfo->mem->request_virt_barray)
+        ((j_common_ptr)cinfo, JPOOL_IMAGE, TRUE,
+         (JDIMENSION)jround_up((long)compptr->width_in_blocks,
+                               (long)compptr->h_samp_factor),
+         (JDIMENSION)jround_up((long)compptr->height_in_blocks,
+                               (long)compptr->v_samp_factor),
+         (JDIMENSION)access_rows);
+    }
+    coef->pub.consume_data = consume_data;
+    coef->pub.decompress_data = decompress_data;
+    coef->pub.coef_arrays = coef->whole_image; /* link to virtual arrays */
+#else
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+  } else {
+    /* We only need a single-MCU buffer. */
+    JBLOCKROW buffer;
+    int i;
+
+    buffer = (JBLOCKROW)
+      (*cinfo->mem->alloc_large) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                  D_MAX_BLOCKS_IN_MCU * sizeof(JBLOCK));
+    for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) {
+      coef->MCU_buffer[i] = buffer + i;
+    }
+    coef->pub.consume_data = dummy_consume_data;
+    coef->pub.decompress_data = decompress_onepass;
+    coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */
+  }
+
+  /* Allocate the workspace buffer */
+  coef->workspace = (JCOEF *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                sizeof(JCOEF) * DCTSIZE2);
+}