epeg 1.0

data/epeg/vendor/libjpeg-turbo-2.0.4/jdhuff.h

@@ -0,0 +1,238 @@
+/*
+ * jdhuff.h
+ *
+ * This file was part of the Independent JPEG Group's software:
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * libjpeg-turbo Modifications:
+ * Copyright (C) 2010-2011, 2015-2016, D. R. Commander.
+ * For conditions of distribution and use, see the accompanying README.ijg
+ * file.
+ *
+ * This file contains declarations for Huffman entropy decoding routines
+ * that are shared between the sequential decoder (jdhuff.c) and the
+ * progressive decoder (jdphuff.c).  No other modules need to see these.
+ */
+
+#include "jconfigint.h"
+
+
+/* Derived data constructed for each Huffman table */
+
+#define HUFF_LOOKAHEAD  8       /* # of bits of lookahead */
+
+typedef struct {
+  /* Basic tables: (element [0] of each array is unused) */
+  JLONG maxcode[18];            /* largest code of length k (-1 if none) */
+  /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */
+  JLONG valoffset[18];          /* huffval[] offset for codes of length k */
+  /* valoffset[k] = huffval[] index of 1st symbol of code length k, less
+   * the smallest code of length k; so given a code of length k, the
+   * corresponding symbol is huffval[code + valoffset[k]]
+   */
+
+  /* Link to public Huffman table (needed only in jpeg_huff_decode) */
+  JHUFF_TBL *pub;
+
+  /* Lookahead table: indexed by the next HUFF_LOOKAHEAD bits of
+   * the input data stream.  If the next Huffman code is no more
+   * than HUFF_LOOKAHEAD bits long, we can obtain its length and
+   * the corresponding symbol directly from this tables.
+   *
+   * The lower 8 bits of each table entry contain the number of
+   * bits in the corresponding Huffman code, or HUFF_LOOKAHEAD + 1
+   * if too long.  The next 8 bits of each entry contain the
+   * symbol.
+   */
+  int lookup[1 << HUFF_LOOKAHEAD];
+} d_derived_tbl;
+
+/* Expand a Huffman table definition into the derived format */
+EXTERN(void) jpeg_make_d_derived_tbl(j_decompress_ptr cinfo, boolean isDC,
+                                     int tblno, d_derived_tbl **pdtbl);
+
+
+/*
+ * Fetching the next N bits from the input stream is a time-critical operation
+ * for the Huffman decoders.  We implement it with a combination of inline
+ * macros and out-of-line subroutines.  Note that N (the number of bits
+ * demanded at one time) never exceeds 15 for JPEG use.
+ *
+ * We read source bytes into get_buffer and dole out bits as needed.
+ * If get_buffer already contains enough bits, they are fetched in-line
+ * by the macros CHECK_BIT_BUFFER and GET_BITS.  When there aren't enough
+ * bits, jpeg_fill_bit_buffer is called; it will attempt to fill get_buffer
+ * as full as possible (not just to the number of bits needed; this
+ * prefetching reduces the overhead cost of calling jpeg_fill_bit_buffer).
+ * Note that jpeg_fill_bit_buffer may return FALSE to indicate suspension.
+ * On TRUE return, jpeg_fill_bit_buffer guarantees that get_buffer contains
+ * at least the requested number of bits --- dummy zeroes are inserted if
+ * necessary.
+ */
+
+#if !defined(_WIN32) && !defined(SIZEOF_SIZE_T)
+#error Cannot determine word size
+#endif
+
+#if SIZEOF_SIZE_T == 8 || defined(_WIN64)
+
+typedef size_t bit_buf_type;            /* type of bit-extraction buffer */
+#define BIT_BUF_SIZE  64                /* size of buffer in bits */
+
+#else
+
+typedef unsigned long bit_buf_type;     /* type of bit-extraction buffer */
+#define BIT_BUF_SIZE  32                /* size of buffer in bits */
+
+#endif
+
+/* If long is > 32 bits on your machine, and shifting/masking longs is
+ * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE
+ * appropriately should be a win.  Unfortunately we can't define the size
+ * with something like  #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8)
+ * because not all machines measure sizeof in 8-bit bytes.
+ */
+
+typedef struct {                /* Bitreading state saved across MCUs */
+  bit_buf_type get_buffer;      /* current bit-extraction buffer */
+  int bits_left;                /* # of unused bits in it */
+} bitread_perm_state;
+
+typedef struct {                /* Bitreading working state within an MCU */
+  /* Current data source location */
+  /* We need a copy, rather than munging the original, in case of suspension */
+  const JOCTET *next_input_byte; /* => next byte to read from source */
+  size_t bytes_in_buffer;       /* # of bytes remaining in source buffer */
+  /* Bit input buffer --- note these values are kept in register variables,
+   * not in this struct, inside the inner loops.
+   */
+  bit_buf_type get_buffer;      /* current bit-extraction buffer */
+  int bits_left;                /* # of unused bits in it */
+  /* Pointer needed by jpeg_fill_bit_buffer. */
+  j_decompress_ptr cinfo;       /* back link to decompress master record */
+} bitread_working_state;
+
+/* Macros to declare and load/save bitread local variables. */
+#define BITREAD_STATE_VARS \
+  register bit_buf_type get_buffer; \
+  register int bits_left; \
+  bitread_working_state br_state
+
+#define BITREAD_LOAD_STATE(cinfop, permstate) \
+  br_state.cinfo = cinfop; \
+  br_state.next_input_byte = cinfop->src->next_input_byte; \
+  br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \
+  get_buffer = permstate.get_buffer; \
+  bits_left = permstate.bits_left;
+
+#define BITREAD_SAVE_STATE(cinfop, permstate) \
+  cinfop->src->next_input_byte = br_state.next_input_byte; \
+  cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \
+  permstate.get_buffer = get_buffer; \
+  permstate.bits_left = bits_left
+
+/*
+ * These macros provide the in-line portion of bit fetching.
+ * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer
+ * before using GET_BITS, PEEK_BITS, or DROP_BITS.
+ * The variables get_buffer and bits_left are assumed to be locals,
+ * but the state struct might not be (jpeg_huff_decode needs this).
+ *      CHECK_BIT_BUFFER(state, n, action);
+ *              Ensure there are N bits in get_buffer; if suspend, take action.
+ *      val = GET_BITS(n);
+ *              Fetch next N bits.
+ *      val = PEEK_BITS(n);
+ *              Fetch next N bits without removing them from the buffer.
+ *      DROP_BITS(n);
+ *              Discard next N bits.
+ * The value N should be a simple variable, not an expression, because it
+ * is evaluated multiple times.
+ */
+
+#define CHECK_BIT_BUFFER(state, nbits, action) { \
+  if (bits_left < (nbits)) { \
+    if (!jpeg_fill_bit_buffer(&(state), get_buffer, bits_left, nbits)) \
+      { action; } \
+    get_buffer = (state).get_buffer;  bits_left = (state).bits_left; \
+  } \
+}
+
+#define GET_BITS(nbits) \
+  (((int)(get_buffer >> (bits_left -= (nbits)))) & ((1 << (nbits)) - 1))
+
+#define PEEK_BITS(nbits) \
+  (((int)(get_buffer >> (bits_left -  (nbits)))) & ((1 << (nbits)) - 1))
+
+#define DROP_BITS(nbits) \
+  (bits_left -= (nbits))
+
+/* Load up the bit buffer to a depth of at least nbits */
+EXTERN(boolean) jpeg_fill_bit_buffer(bitread_working_state *state,
+                                     register bit_buf_type get_buffer,
+                                     register int bits_left, int nbits);
+
+
+/*
+ * Code for extracting next Huffman-coded symbol from input bit stream.
+ * Again, this is time-critical and we make the main paths be macros.
+ *
+ * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits
+ * without looping.  Usually, more than 95% of the Huffman codes will be 8
+ * or fewer bits long.  The few overlength codes are handled with a loop,
+ * which need not be inline code.
+ *
+ * Notes about the HUFF_DECODE macro:
+ * 1. Near the end of the data segment, we may fail to get enough bits
+ *    for a lookahead.  In that case, we do it the hard way.
+ * 2. If the lookahead table contains no entry, the next code must be
+ *    more than HUFF_LOOKAHEAD bits long.
+ * 3. jpeg_huff_decode returns -1 if forced to suspend.
+ */
+
+#define HUFF_DECODE(result, state, htbl, failaction, slowlabel) { \
+  register int nb, look; \
+  if (bits_left < HUFF_LOOKAHEAD) { \
+    if (!jpeg_fill_bit_buffer(&state, get_buffer, bits_left, 0)) \
+      { failaction; } \
+    get_buffer = state.get_buffer;  bits_left = state.bits_left; \
+    if (bits_left < HUFF_LOOKAHEAD) { \
+      nb = 1;  goto slowlabel; \
+    } \
+  } \
+  look = PEEK_BITS(HUFF_LOOKAHEAD); \
+  if ((nb = (htbl->lookup[look] >> HUFF_LOOKAHEAD)) <= HUFF_LOOKAHEAD) { \
+    DROP_BITS(nb); \
+    result = htbl->lookup[look] & ((1 << HUFF_LOOKAHEAD) - 1); \
+  } else { \
+slowlabel: \
+    if ((result = \
+         jpeg_huff_decode(&state, get_buffer, bits_left, htbl, nb)) < 0) \
+      { failaction; } \
+    get_buffer = state.get_buffer;  bits_left = state.bits_left; \
+  } \
+}
+
+#define HUFF_DECODE_FAST(s, nb, htbl) \
+  FILL_BIT_BUFFER_FAST; \
+  s = PEEK_BITS(HUFF_LOOKAHEAD); \
+  s = htbl->lookup[s]; \
+  nb = s >> HUFF_LOOKAHEAD; \
+  /* Pre-execute the common case of nb <= HUFF_LOOKAHEAD */ \
+  DROP_BITS(nb); \
+  s = s & ((1 << HUFF_LOOKAHEAD) - 1); \
+  if (nb > HUFF_LOOKAHEAD) { \
+    /* Equivalent of jpeg_huff_decode() */ \
+    /* Don't use GET_BITS() here because we don't want to modify bits_left */ \
+    s = (get_buffer >> bits_left) & ((1 << (nb)) - 1); \
+    while (s > htbl->maxcode[nb]) { \
+      s <<= 1; \
+      s |= GET_BITS(1); \
+      nb++; \
+    } \
+    s = htbl->pub->huffval[(int)(s + htbl->valoffset[nb]) & 0xFF]; \
+  }
+
+/* Out-of-line case for Huffman code fetching */
+EXTERN(int) jpeg_huff_decode(bitread_working_state *state,
+                             register bit_buf_type get_buffer,
+                             register int bits_left, d_derived_tbl *htbl,
+                             int min_bits);

data/epeg/vendor/libjpeg-turbo-2.0.4/jdicc.c

@@ -0,0 +1,171 @@
+/*
+ * jdicc.c
+ *
+ * Copyright (C) 1997-1998, Thomas G. Lane, Todd Newman.
+ * Copyright (C) 2017, D. R. Commander.
+ * For conditions of distribution and use, see the accompanying README.ijg
+ * file.
+ *
+ * This file provides code to read International Color Consortium (ICC) device
+ * profiles embedded in JFIF JPEG image files.  The ICC has defined a standard
+ * for including such data in JPEG "APP2" markers.  The code given here does
+ * not know anything about the internal structure of the ICC profile data; it
+ * just knows how to get the profile data from a JPEG file while reading it.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jerror.h"
+
+#ifndef HAVE_STDLIB_H           /* <stdlib.h> should declare malloc() */
+extern void *malloc(size_t size);
+#endif
+
+
+#define ICC_MARKER  (JPEG_APP0 + 2)     /* JPEG marker code for ICC */
+#define ICC_OVERHEAD_LEN  14            /* size of non-profile data in APP2 */
+
+
+/*
+ * Handy subroutine to test whether a saved marker is an ICC profile marker.
+ */
+
+LOCAL(boolean)
+marker_is_icc(jpeg_saved_marker_ptr marker)
+{
+  return
+    marker->marker == ICC_MARKER &&
+    marker->data_length >= ICC_OVERHEAD_LEN &&
+    /* verify the identifying string */
+    GETJOCTET(marker->data[0]) == 0x49 &&
+    GETJOCTET(marker->data[1]) == 0x43 &&
+    GETJOCTET(marker->data[2]) == 0x43 &&
+    GETJOCTET(marker->data[3]) == 0x5F &&
+    GETJOCTET(marker->data[4]) == 0x50 &&
+    GETJOCTET(marker->data[5]) == 0x52 &&
+    GETJOCTET(marker->data[6]) == 0x4F &&
+    GETJOCTET(marker->data[7]) == 0x46 &&
+    GETJOCTET(marker->data[8]) == 0x49 &&
+    GETJOCTET(marker->data[9]) == 0x4C &&
+    GETJOCTET(marker->data[10]) == 0x45 &&
+    GETJOCTET(marker->data[11]) == 0x0;
+}
+
+
+/*
+ * See if there was an ICC profile in the JPEG file being read; if so,
+ * reassemble and return the profile data.
+ *
+ * TRUE is returned if an ICC profile was found, FALSE if not.  If TRUE is
+ * returned, *icc_data_ptr is set to point to the returned data, and
+ * *icc_data_len is set to its length.
+ *
+ * IMPORTANT: the data at *icc_data_ptr is allocated with malloc() and must be
+ * freed by the caller with free() when the caller no longer needs it.
+ * (Alternatively, we could write this routine to use the IJG library's memory
+ * allocator, so that the data would be freed implicitly when
+ * jpeg_finish_decompress() is called.  But it seems likely that many
+ * applications will prefer to have the data stick around after decompression
+ * finishes.)
+ */
+
+GLOBAL(boolean)
+jpeg_read_icc_profile(j_decompress_ptr cinfo, JOCTET **icc_data_ptr,
+                      unsigned int *icc_data_len)
+{
+  jpeg_saved_marker_ptr marker;
+  int num_markers = 0;
+  int seq_no;
+  JOCTET *icc_data;
+  unsigned int total_length;
+#define MAX_SEQ_NO  255         /* sufficient since marker numbers are bytes */
+  char marker_present[MAX_SEQ_NO + 1];      /* 1 if marker found */
+  unsigned int data_length[MAX_SEQ_NO + 1]; /* size of profile data in marker */
+  unsigned int data_offset[MAX_SEQ_NO + 1]; /* offset for data in marker */
+
+  if (icc_data_ptr == NULL || icc_data_len == NULL)
+    ERREXIT(cinfo, JERR_BUFFER_SIZE);
+  if (cinfo->global_state < DSTATE_READY)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  *icc_data_ptr = NULL;         /* avoid confusion if FALSE return */
+  *icc_data_len = 0;
+
+  /* This first pass over the saved markers discovers whether there are
+   * any ICC markers and verifies the consistency of the marker numbering.
+   */
+
+  for (seq_no = 1; seq_no <= MAX_SEQ_NO; seq_no++)
+    marker_present[seq_no] = 0;
+
+  for (marker = cinfo->marker_list; marker != NULL; marker = marker->next) {
+    if (marker_is_icc(marker)) {
+      if (num_markers == 0)
+        num_markers = GETJOCTET(marker->data[13]);
+      else if (num_markers != GETJOCTET(marker->data[13])) {
+        WARNMS(cinfo, JWRN_BOGUS_ICC);  /* inconsistent num_markers fields */
+        return FALSE;
+      }
+      seq_no = GETJOCTET(marker->data[12]);
+      if (seq_no <= 0 || seq_no > num_markers) {
+        WARNMS(cinfo, JWRN_BOGUS_ICC);  /* bogus sequence number */
+        return FALSE;
+      }
+      if (marker_present[seq_no]) {
+        WARNMS(cinfo, JWRN_BOGUS_ICC);  /* duplicate sequence numbers */
+        return FALSE;
+      }
+      marker_present[seq_no] = 1;
+      data_length[seq_no] = marker->data_length - ICC_OVERHEAD_LEN;
+    }
+  }
+
+  if (num_markers == 0)
+    return FALSE;
+
+  /* Check for missing markers, count total space needed,
+   * compute offset of each marker's part of the data.
+   */
+
+  total_length = 0;
+  for (seq_no = 1; seq_no <= num_markers; seq_no++) {
+    if (marker_present[seq_no] == 0) {
+      WARNMS(cinfo, JWRN_BOGUS_ICC);  /* missing sequence number */
+      return FALSE;
+    }
+    data_offset[seq_no] = total_length;
+    total_length += data_length[seq_no];
+  }
+
+  if (total_length == 0) {
+    WARNMS(cinfo, JWRN_BOGUS_ICC);  /* found only empty markers? */
+    return FALSE;
+  }
+
+  /* Allocate space for assembled data */
+  icc_data = (JOCTET *)malloc(total_length * sizeof(JOCTET));
+  if (icc_data == NULL)
+    ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 11);  /* oops, out of memory */
+
+  /* and fill it in */
+  for (marker = cinfo->marker_list; marker != NULL; marker = marker->next) {
+    if (marker_is_icc(marker)) {
+      JOCTET FAR *src_ptr;
+      JOCTET *dst_ptr;
+      unsigned int length;
+      seq_no = GETJOCTET(marker->data[12]);
+      dst_ptr = icc_data + data_offset[seq_no];
+      src_ptr = marker->data + ICC_OVERHEAD_LEN;
+      length = data_length[seq_no];
+      while (length--) {
+        *dst_ptr++ = *src_ptr++;
+      }
+    }
+  }
+
+  *icc_data_ptr = icc_data;
+  *icc_data_len = total_length;
+
+  return TRUE;
+}