epeg 1.0

data/epeg/vendor/libjpeg-turbo-2.0.4/release/makesrpm.in

@@ -0,0 +1,48 @@
+#!/bin/sh
+
+set -u
+set -e
+trap onexit INT
+trap onexit TERM
+trap onexit EXIT
+
+TMPDIR=
+
+onexit()
+{
+	if [ ! "$TMPDIR" = "" ]; then
+		rm -rf $TMPDIR
+	fi
+}
+
+PKGNAME=@PKGNAME@
+PROJECT=@CMAKE_PROJECT_NAME@
+VERSION=@VERSION@
+BUILD=@BUILD@
+
+if [ -f $PKGNAME-$VERSION.src.rpm ]; then
+	rm -f $PKGNAME-$VERSION.src.rpm
+fi
+
+umask 022
+TMPDIR=`mktemp -d /tmp/$PKGNAME-build.XXXXXX`
+
+mkdir -p $TMPDIR/RPMS
+mkdir -p $TMPDIR/SRPMS
+mkdir -p $TMPDIR/BUILD
+mkdir -p $TMPDIR/SOURCES
+mkdir -p $TMPDIR/SPECS
+
+if [ ! -f $PROJECT-$VERSION.tar.gz ]; then
+	echo "ERROR: $PROJECT-$VERSION.tar.gz does not exist."
+fi
+
+cp $PROJECT-$VERSION.tar.gz $TMPDIR/SOURCES/$PROJECT-$VERSION.tar.gz
+
+cat pkgscripts/rpm.spec | sed s/%{_blddir}/%{_tmppath}/g \
+	| sed s/#--\>//g > $TMPDIR/SPECS/$PKGNAME.spec
+
+rpmbuild -bs --define "_topdir $TMPDIR" $TMPDIR/SPECS/$PKGNAME.spec
+mv $TMPDIR/SRPMS/$PKGNAME-$VERSION-$BUILD.src.rpm $PKGNAME-$VERSION.src.rpm
+
+exit

data/epeg/vendor/libjpeg-turbo-2.0.4/release/maketarball.in

@@ -0,0 +1,51 @@
+#!/bin/sh
+
+set -u
+set -e
+trap onexit INT
+trap onexit TERM
+trap onexit EXIT
+
+TMPDIR=
+SUDO=
+
+onexit()
+{
+	if [ ! "$TMPDIR" = "" ]; then
+		rm -rf $TMPDIR
+	fi
+}
+
+uid()
+{
+	id | cut -f2 -d = | cut -f1 -d \(;
+}
+
+PKGNAME=@PKGNAME@
+VERSION=@VERSION@
+ARCH=@CPU_TYPE@
+OS=@CMAKE_SYSTEM_NAME@
+PREFIX=@CMAKE_INSTALL_PREFIX@
+
+umask 022
+rm -f $PKGNAME-$VERSION-$OS-$ARCH.tar.bz2
+TMPDIR=`mktemp -d /tmp/$PKGNAME-build.XXXXXX`
+mkdir -p $TMPDIR/install
+
+make install DESTDIR=$TMPDIR/install
+echo tartest >$TMPDIR/tartest
+GNUTAR=0
+BSDTAR=0
+tar cf $TMPDIR/tartest.tar --owner=root --group=root -C $TMPDIR tartest >/dev/null 2>&1 && GNUTAR=1
+if [ "$GNUTAR" = "1" ]; then
+	tar cf - --owner=root --group=root -C $TMPDIR/install .$PREFIX | bzip2 -c >$PKGNAME-$VERSION-$OS-$ARCH.tar.bz2
+else
+	tar cf $TMPDIR/tartest.tar --uid 0 --gid 0 -C $TMPDIR tartest >/dev/null 2>&1 && BSDTAR=1
+	if [ "$BSDTAR" = "1" ]; then
+		tar cf - --uid=0 --gid=0 -C $TMPDIR/install .$PREFIX | bzip2 -c >$PKGNAME-$VERSION-$OS-$ARCH.tar.bz2
+	else
+		tar cf - -C $TMPDIR/install .$PREFIX | bzip2 -c >$PKGNAME-$VERSION-$OS-$ARCH.tar.bz2
+	fi
+fi
+
+exit

data/epeg/vendor/libjpeg-turbo-2.0.4/release/rpm.spec.in

@@ -0,0 +1,221 @@
+%global _docdir %{_defaultdocdir}/%{name}-%{version}
+%define _prefix @CMAKE_INSTALL_PREFIX@
+%define _bindir @CMAKE_INSTALL_FULL_BINDIR@
+%define _datarootdir @CMAKE_INSTALL_FULL_DATAROOTDIR@
+%define _includedir @CMAKE_INSTALL_FULL_INCLUDEDIR@
+%define _javadir @CMAKE_INSTALL_FULL_JAVADIR@
+%define _mandir @CMAKE_INSTALL_FULL_MANDIR@
+%define _enable_static @ENABLE_STATIC@
+%define _enable_shared @ENABLE_SHARED@
+%define _with_turbojpeg @WITH_TURBOJPEG@
+%define _with_java @WITH_JAVA@
+
+%if "%{?__isa_bits:1}" == "1"
+%define _bits %{__isa_bits}
+%else
+# RPM < 4.6
+%if "%{_lib}" == "lib64"
+%define _bits 64
+%else
+%define _bits 32
+%endif
+%endif
+
+#-->%if 1
+%if "%{_bits}" == "64"
+%define _libdir %{_exec_prefix}/lib64
+%else
+%if "%{_prefix}" == "/opt/libjpeg-turbo"
+%define _libdir %{_exec_prefix}/lib32
+%endif
+%endif
+#-->%else
+%define _libdir @CMAKE_INSTALL_FULL_LIBDIR@
+#-->%endif
+
+Summary: A SIMD-accelerated JPEG codec that provides both the libjpeg and TurboJPEG APIs
+Name: @PKGNAME@
+Version: @VERSION@
+Vendor: @PKGVENDOR@
+URL: @PKGURL@
+Group: System Environment/Libraries
+#-->Source0: http://prdownloads.sourceforge.net/@CMAKE_PROJECT_NAME@/@CMAKE_PROJECT_NAME@-%{version}.tar.gz
+Release: @BUILD@
+License: BSD-style
+BuildRoot: %{_blddir}/%{name}-buildroot-%{version}-%{release}
+Requires: /sbin/ldconfig
+%if "%{_bits}" == "64"
+Provides: %{name} = %{version}-%{release}, @CMAKE_PROJECT_NAME@ = %{version}-%{release}, libturbojpeg.so()(64bit)
+%else
+Provides: %{name} = %{version}-%{release}, @CMAKE_PROJECT_NAME@ = %{version}-%{release}, libturbojpeg.so
+%endif
+
+%description
+libjpeg-turbo is a JPEG image codec that uses SIMD instructions to accelerate
+baseline JPEG compression and decompression on x86, x86-64, ARM, PowerPC, and
+MIPS systems, as well as progressive JPEG compression on x86 and x86-64
+systems.  On such systems, libjpeg-turbo is generally 2-6x as fast as libjpeg,
+all else being equal.  On other types of systems, libjpeg-turbo can still
+outperform libjpeg by a significant amount, by virtue of its highly-optimized
+Huffman coding routines.  In many cases, the performance of libjpeg-turbo
+rivals that of proprietary high-speed JPEG codecs.
+
+libjpeg-turbo implements both the traditional libjpeg API as well as the less
+powerful but more straightforward TurboJPEG API.  libjpeg-turbo also features
+colorspace extensions that allow it to compress from/decompress to 32-bit and
+big-endian pixel buffers (RGBX, XBGR, etc.), as well as a full-featured Java
+interface.
+
+libjpeg-turbo was originally based on libjpeg/SIMD, an MMX-accelerated
+derivative of libjpeg v6b developed by Miyasaka Masaru.  The TigerVNC and
+VirtualGL projects made numerous enhancements to the codec in 2009, and in
+early 2010, libjpeg-turbo spun off into an independent project, with the goal
+of making high-speed JPEG compression/decompression technology available to a
+broader range of users and developers.
+
+#-->%prep
+#-->%setup -q -n @CMAKE_PROJECT_NAME@-%{version}
+
+#-->%build
+#-->cmake -G"Unix Makefiles" -DCMAKE_BUILD_TYPE=@CMAKE_BUILD_TYPE@ \
+#-->  -DBUILD=%{release} \
+#-->  -DCMAKE_INSTALL_BINDIR=%{_bindir} \
+#-->  -DCMAKE_INSTALL_DATAROOTDIR=%{_datarootdir} \
+#-->  -DCMAKE_INSTALL_DOCDIR=%{_docdir} \
+#-->  -DCMAKE_INSTALL_INCLUDEDIR=%{_includedir} \
+#-->  -DCMAKE_INSTALL_JAVADIR=%{_javadir} \
+#-->  -DCMAKE_INSTALL_LIBDIR=%{_libdir} \
+#-->  -DCMAKE_INSTALL_MANDIR=%{_mandir} \
+#-->  -DCMAKE_INSTALL_PREFIX=%{_prefix} \
+#-->  -DCMAKE_POSITION_INDEPENDENT_CODE=@CMAKE_POSITION_INDEPENDENT_CODE@ \
+#-->  -DENABLE_SHARED=@ENABLE_SHARED@ -DENABLE_STATIC=@ENABLE_STATIC@ \
+#-->  -DSO_MAJOR_VERSION=@SO_MAJOR_VERSION@ \
+#-->  -DSO_MINOR_VERSION=@SO_MINOR_VERSION@ \
+#-->  -DJPEG_LIB_VERSION=@JPEG_LIB_VERSION@ \
+#-->  -DREQUIRE_SIMD=@REQUIRE_SIMD@ \
+#-->  -DWITH_12BIT=@WITH_12BIT@ -DWITH_ARITH_DEC=@WITH_ARITH_DEC@ \
+#-->  -DWITH_ARITH_ENC=@WITH_ARITH_ENC@ -DWITH_JAVA=@WITH_JAVA@ \
+#-->  -DWITH_JPEG7=@WITH_JPEG7@ -DWITH_JPEG8=@WITH_JPEG8@ \
+#-->  -DWITH_MEM_SRCDST=@WITH_MEM_SRCDST@ -DWITH_SIMD=@WITH_SIMD@ \
+#-->  -DWITH_TURBOJPEG=@WITH_TURBOJPEG@ .
+#-->make DESTDIR=$RPM_BUILD_ROOT
+
+%install
+
+rm -rf $RPM_BUILD_ROOT
+make install DESTDIR=$RPM_BUILD_ROOT
+/sbin/ldconfig -n $RPM_BUILD_ROOT%{_libdir}
+
+#-->%if 0
+
+# This is only needed to support in-tree RPM generation via 'make rpm'.  When
+# building from a SRPM, we control where things are installed via CMake
+# variables.
+
+safedirmove ()
+{
+	if [ "$1" = "$2" ]; then
+		return 0
+	fi
+	if [ "$1" = "" -o ! -d "$1" ]; then
+		echo safedirmove: source dir $1 is not valid
+		return 1
+	fi
+	if [ "$2" = "" -o -e "$2" ]; then
+		echo safedirmove: dest dir $2 is not valid
+		return 1
+	fi
+	if [ "$3" = "" -o -e "$3" ]; then
+		echo safedirmove: tmp dir $3 is not valid
+		return 1
+	fi
+	mkdir -p $3
+	mv $1/* $3/
+	rmdir $1
+	mkdir -p $2
+	mv $3/* $2/
+	rmdir $3
+	return 0
+}
+
+LJT_DOCDIR=@CMAKE_INSTALL_FULL_DOCDIR@
+if [ ! "$LJT_DOCDIR" = "%{_docdir}" ]; then
+	safedirmove $RPM_BUILD_ROOT/$LJT_DOCDIR $RPM_BUILD_ROOT/%{_docdir} $RPM_BUILD_ROOT/__tmpdoc
+fi
+
+#-->%endif
+
+LJT_DOCDIR=@CMAKE_INSTALL_FULL_DOCDIR@
+if [ "%{_prefix}" = "@CMAKE_INSTALL_DEFAULT_PREFIX@" -a "$LJT_DOCDIR" = "@CMAKE_INSTALL_DEFAULT_PREFIX@/doc" ]; then
+	ln -fs %{_docdir} $RPM_BUILD_ROOT/$LJT_DOCDIR
+fi
+
+%post -p /sbin/ldconfig
+
+%postun -p /sbin/ldconfig
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%dir %{_docdir}
+%doc %{_docdir}/*
+%dir %{_prefix}
+%if "%{_prefix}" == "@CMAKE_INSTALL_DEFAULT_PREFIX@" && "%{_docdir}" != "%{_prefix}/doc"
+ %{_prefix}/doc
+%endif
+%dir %{_bindir}
+%{_bindir}/cjpeg
+%{_bindir}/djpeg
+%{_bindir}/jpegtran
+%if "%{_with_turbojpeg}" == "1"
+ %{_bindir}/tjbench
+%endif
+%{_bindir}/rdjpgcom
+%{_bindir}/wrjpgcom
+%dir %{_libdir}
+%if "%{_enable_shared}" == "1"
+ %{_libdir}/libjpeg.so.@SO_MAJOR_VERSION@.@SO_AGE@.@SO_MINOR_VERSION@
+ %{_libdir}/libjpeg.so.@SO_MAJOR_VERSION@
+ %{_libdir}/libjpeg.so
+%endif
+%if "%{_enable_static}" == "1"
+ %{_libdir}/libjpeg.a
+%endif
+%dir %{_libdir}/pkgconfig
+%{_libdir}/pkgconfig/libjpeg.pc
+%if "%{_with_turbojpeg}" == "1"
+ %if "%{_enable_shared}" == "1" || "%{_with_java}" == "1"
+  %{_libdir}/libturbojpeg.so.@TURBOJPEG_SO_VERSION@
+  %{_libdir}/libturbojpeg.so.@TURBOJPEG_SO_MAJOR_VERSION@
+  %{_libdir}/libturbojpeg.so
+ %endif
+ %if "%{_enable_static}" == "1"
+  %{_libdir}/libturbojpeg.a
+ %endif
+ %{_libdir}/pkgconfig/libturbojpeg.pc
+%endif
+%dir %{_includedir}
+%{_includedir}/jconfig.h
+%{_includedir}/jerror.h
+%{_includedir}/jmorecfg.h
+%{_includedir}/jpeglib.h
+%if "%{_with_turbojpeg}" == "1"
+ %{_includedir}/turbojpeg.h
+%endif
+%dir %{_mandir}
+%dir %{_mandir}/man1
+%{_mandir}/man1/cjpeg.1*
+%{_mandir}/man1/djpeg.1*
+%{_mandir}/man1/jpegtran.1*
+%{_mandir}/man1/rdjpgcom.1*
+%{_mandir}/man1/wrjpgcom.1*
+%if "%{_prefix}" != "%{_datarootdir}"
+ %dir %{_datarootdir}
+%endif
+%if "%{_with_java}" == "1"
+ %dir %{_javadir}
+ %{_javadir}/turbojpeg.jar
+%endif
+%changelog

data/epeg/vendor/libjpeg-turbo-2.0.4/release/uninstall.in

@@ -0,0 +1,113 @@
+# Copyright (C)2009-2011, 2013, 2016 D. R. Commander.  All Rights Reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# - Redistributions of source code must retain the above copyright notice,
+#   this list of conditions and the following disclaimer.
+# - Redistributions in binary form must reproduce the above copyright notice,
+#   this list of conditions and the following disclaimer in the documentation
+#   and/or other materials provided with the distribution.
+# - Neither the name of the libjpeg-turbo Project nor the names of its
+#   contributors may be used to endorse or promote products derived from this
+#   software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS",
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+#!/bin/sh
+
+if [ ! "`id -u`" = "0" ]; then
+	echo "ERROR: This script must be executed as root"
+	exit -1
+fi
+
+PKGNAME=@PKGNAME@
+PKGID=@PKGID@
+RECEIPT=/Library/Receipts/$PKGNAME.pkg
+
+LSBOM=
+if [ -d $RECEIPT ]; then
+	LSBOM='lsbom -s -f -l '$RECEIPT'/Contents/Archive.bom'
+else
+	LSBOM='pkgutil --files '$PKGID
+fi
+
+mylsbom()
+{
+	$LSBOM || (echo "ERROR: Could not list package contents"; exit -1)
+}
+
+echo Removing package files ...
+EXITSTATUS=0
+pushd /
+mylsbom | while read file; do
+	if [ ! -d "$file" ]; then rm "$file" 2>&1 || EXITSTATUS=-1; fi
+done
+popd
+
+echo Removing package directories ...
+PREFIX=@CMAKE_INSTALL_PREFIX@
+BINDIR=@CMAKE_INSTALL_FULL_BINDIR@
+DATAROOTDIR=@CMAKE_INSTALL_FULL_DATAROOTDIR@
+INCLUDEDIR=@CMAKE_INSTALL_FULL_INCLUDEDIR@
+JAVADIR=@CMAKE_INSTALL_FULL_JAVADIR@
+LIBDIR=@CMAKE_INSTALL_FULL_LIBDIR@
+MANDIR=@CMAKE_INSTALL_FULL_MANDIR@
+
+if [ -d $BINDIR ]; then
+	rmdir $BINDIR 2>&1 || EXITSTATUS=-1
+fi
+if [ -d $LIBDIR/pkgconfig ]; then
+	rmdir $LIBDIR/pkgconfig 2>&1 || EXITSTATUS=-1
+fi
+if [ -d $LIBDIR ]; then
+	rmdir $LIBDIR 2>&1 || EXITSTATUS=-1
+fi
+if [ -d $INCLUDEDIR ]; then
+	rmdir $INCLUDEDIR 2>&1 || EXITSTATUS=-1
+fi
+if [ "$PREFIX" = "@CMAKE_INSTALL_DEFAULT_PREFIX@" -a "$LIBDIR" = "@CMAKE_INSTALL_DEFAULT_PREFIX@/lib" ]; then
+	if [ -h $LIBDIR\32 ]; then
+		rm $LIBDIR\32 2>&1 || EXITSTATUS=-1
+	fi
+	if [ -h $LIBDIR\64 ]; then
+		rm $LIBDIR\64 2>&1 || EXITSTATUS=-1
+	fi
+fi
+if [ -d $MANDIR/man1 ]; then
+	rmdir $MANDIR/man1 2>&1 || EXITSTATUS=-1
+fi
+if [ -d $MANDIR ]; then
+	rmdir $MANDIR 2>&1 || EXITSTATUS=-1
+fi
+if [ -d $JAVADIR ]; then
+	rmdir $JAVADIR 2>&1 || EXITSTATUS=-1
+fi
+if [ -d $DATAROOTDIR -a "$DATAROOTDIR" != "$PREFIX" ]; then
+	rmdir $DATAROOTDIR 2>&1 || EXITSTATUS=-1
+fi
+if [ "$PREFIX" = "@CMAKE_INSTALL_DEFAULT_PREFIX@" -a -h "$PREFIX/doc" ]; then
+	rm $PREFIX/doc 2>&1 || EXITSTATUS=-1
+fi
+rmdir $PREFIX 2>&1 || EXITSTATUS=-1
+rmdir /Library/Documentation/$PKGNAME 2>&1 || EXITSTATUS=-1
+
+if [ -d $RECEIPT ]; then
+	echo Removing package receipt ...
+	rm -r $RECEIPT 2>&1 || EXITSTATUS=-1
+else
+	echo Forgetting package $PKGID ...
+	pkgutil --forget $PKGID
+fi
+
+exit $EXITSTATUS

data/epeg/vendor/libjpeg-turbo-2.0.4/sharedlib/CMakeLists.txt

@@ -0,0 +1,99 @@
+# Anything that must be linked against the shared C library on Windows must
+# be built in this subdirectory, because CMake doesn't allow us to override
+# the compiler flags for each build type except at directory scope.  Note
+# to CMake developers:  Add a COMPILE_FLAGS_<CONFIG> target property, or
+# better yet, provide a friendly way of configuring a Windows target to use the
+# static C library.
+
+set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/..)
+set(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/..)
+set(CMAKE_ARCHIVE_OUTPUT_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/..)
+
+if(MSVC)
+  # Build all configurations against shared C library
+  foreach(var CMAKE_C_FLAGS CMAKE_C_FLAGS_DEBUG CMAKE_C_FLAGS_RELEASE
+    CMAKE_C_FLAGS_MINSIZEREL CMAKE_C_FLAGS_RELWITHDEBINFO)
+    if(${var} MATCHES "/MT")
+      string(REGEX REPLACE "/MT" "/MD" ${var} "${${var}}")
+    endif()
+  endforeach()
+endif()
+
+foreach(src ${JPEG_SOURCES})
+  set(JPEG_SRCS ${JPEG_SRCS} ../${src})
+endforeach()
+
+if(WITH_SIMD AND (MSVC_IDE OR XCODE))
+  # This tells CMake that the "source" files haven't been generated yet
+  set_source_files_properties(${SIMD_OBJS} PROPERTIES GENERATED 1)
+endif()
+
+if(WIN32)
+  if(WITH_MEM_SRCDST)
+    set(DEFFILE ../win/jpeg${SO_MAJOR_VERSION}-memsrcdst.def)
+  else()
+    set(DEFFILE ../win/jpeg${SO_MAJOR_VERSION}.def)
+  endif()
+endif()
+add_library(jpeg SHARED ${JPEG_SRCS} ${DEFFILE} $<TARGET_OBJECTS:simd>
+  ${SIMD_OBJS})
+
+set_target_properties(jpeg PROPERTIES SOVERSION ${SO_MAJOR_VERSION}
+  VERSION ${SO_MAJOR_VERSION}.${SO_AGE}.${SO_MINOR_VERSION})
+if(APPLE AND (NOT CMAKE_OSX_DEPLOYMENT_TARGET OR
+              CMAKE_OSX_DEPLOYMENT_TARGET VERSION_GREATER 10.4))
+  if(NOT CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG)
+    set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "-Wl,-rpath,")
+  endif()
+  set_target_properties(jpeg PROPERTIES MACOSX_RPATH 1)
+endif()
+if(MAPFLAG)
+  set_target_properties(jpeg PROPERTIES
+    LINK_FLAGS "${MAPFLAG}${CMAKE_CURRENT_BINARY_DIR}/../libjpeg.map")
+endif()
+if(MSVC)
+  set_target_properties(jpeg PROPERTIES
+    RUNTIME_OUTPUT_NAME jpeg${SO_MAJOR_VERSION})
+  # The jsimd_*.c file is built using /MT, so this prevents a linker warning.
+  set_target_properties(jpeg PROPERTIES LINK_FLAGS "/NODEFAULTLIB:LIBCMT /NODEFAULTLIB:LIBCMTD")
+elseif(MINGW)
+  set_target_properties(jpeg PROPERTIES SUFFIX -${SO_MAJOR_VERSION}.dll)
+endif()
+
+if(WIN32)
+  set(USE_SETMODE "-DUSE_SETMODE")
+endif()
+if(WITH_12BIT)
+  set(COMPILE_FLAGS "-DGIF_SUPPORTED -DPPM_SUPPORTED ${USE_SETMODE}")
+else()
+  set(COMPILE_FLAGS "-DBMP_SUPPORTED -DGIF_SUPPORTED -DPPM_SUPPORTED -DTARGA_SUPPORTED ${USE_SETMODE}")
+  set(CJPEG_BMP_SOURCES ../rdbmp.c ../rdtarga.c)
+  set(DJPEG_BMP_SOURCES ../wrbmp.c ../wrtarga.c)
+endif()
+
+add_executable(cjpeg ../cjpeg.c ../cdjpeg.c ../rdgif.c ../rdppm.c
+  ../rdswitch.c ${CJPEG_BMP_SOURCES})
+set_property(TARGET cjpeg PROPERTY COMPILE_FLAGS ${COMPILE_FLAGS})
+target_link_libraries(cjpeg jpeg)
+
+add_executable(djpeg ../djpeg.c ../cdjpeg.c ../rdcolmap.c ../rdswitch.c
+  ../wrgif.c ../wrppm.c ${DJPEG_BMP_SOURCES})
+set_property(TARGET djpeg PROPERTY COMPILE_FLAGS ${COMPILE_FLAGS})
+target_link_libraries(djpeg jpeg)
+
+add_executable(jpegtran ../jpegtran.c ../cdjpeg.c ../rdswitch.c ../transupp.c)
+target_link_libraries(jpegtran jpeg)
+set_property(TARGET jpegtran PROPERTY COMPILE_FLAGS "${USE_SETMODE}")
+
+add_executable(jcstest ../jcstest.c)
+target_link_libraries(jcstest jpeg)
+
+install(TARGETS jpeg cjpeg djpeg jpegtran
+  ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR}
+  LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR}
+  RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR})
+if(NOT CMAKE_VERSION VERSION_LESS "3.1" AND MSVC AND
+  CMAKE_C_LINKER_SUPPORTS_PDB)
+  install(FILES "$<TARGET_PDB_FILE:jpeg>"
+    DESTINATION ${CMAKE_INSTALL_BINDIR} OPTIONAL)
+endif()