epeg 1.0

data/epeg/vendor/libjpeg-turbo-2.0.4/cmakescripts/BuildPackages.cmake

@@ -0,0 +1,182 @@
+# This file is included from the top-level CMakeLists.txt.  We just store it
+# here to avoid cluttering up that file.
+
+set(PKGNAME ${CMAKE_PROJECT_NAME} CACHE STRING
+  "Distribution package name (default: ${CMAKE_PROJECT_NAME})")
+set(PKGVENDOR "The ${CMAKE_PROJECT_NAME} Project" CACHE STRING
+  "Vendor name to be included in distribution package descriptions (default: The ${CMAKE_PROJECT_NAME} Project)")
+set(PKGURL "http://www.${CMAKE_PROJECT_NAME}.org" CACHE STRING
+  "URL of project web site to be included in distribution package descriptions (default: http://www.${CMAKE_PROJECT_NAME}.org)")
+set(PKGEMAIL "information@${CMAKE_PROJECT_NAME}.org" CACHE STRING
+  "E-mail of project maintainer to be included in distribution package descriptions (default: information@${CMAKE_PROJECT_NAME}.org")
+set(PKGID "com.${CMAKE_PROJECT_NAME}.${PKGNAME}" CACHE STRING
+  "Globally unique package identifier (reverse DNS notation) (default: com.${CMAKE_PROJECT_NAME}.${PKGNAME})")
+
+
+###############################################################################
+# Linux RPM and DEB
+###############################################################################
+
+if(CMAKE_SYSTEM_NAME STREQUAL "Linux")
+
+set(RPMARCH ${CMAKE_SYSTEM_PROCESSOR})
+if(CPU_TYPE STREQUAL "x86_64")
+  set(DEBARCH amd64)
+elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "armv7*")
+  set(DEBARCH armhf)
+elseif(CPU_TYPE STREQUAL "arm64")
+  set(DEBARCH ${CPU_TYPE})
+elseif(CPU_TYPE STREQUAL "arm")
+  set(DEBARCH armel)
+elseif(CMAKE_SYSTEM_PROCESSOR_LC STREQUAL "ppc64le")
+  set(DEBARCH ppc64el)
+elseif(CPU_TYPE STREQUAL "powerpc" AND BITS EQUAL 32)
+  set(RPMARCH ppc)
+  set(DEBARCH ppc)
+else()
+  set(DEBARCH ${CMAKE_SYSTEM_PROCESSOR})
+endif()
+message(STATUS "RPM architecture = ${RPMARCH}, DEB architecture = ${DEBARCH}")
+
+# Re-set CMAKE_POSITION_INDEPENDENT_CODE so that the RPM spec file works
+# properly
+boolean_number(CMAKE_POSITION_INDEPENDENT_CODE)
+
+configure_file(release/makerpm.in pkgscripts/makerpm)
+configure_file(release/rpm.spec.in pkgscripts/rpm.spec @ONLY)
+
+add_custom_target(rpm sh pkgscripts/makerpm
+  SOURCES pkgscripts/makerpm)
+
+configure_file(release/makesrpm.in pkgscripts/makesrpm)
+
+add_custom_target(srpm sh pkgscripts/makesrpm
+  SOURCES pkgscripts/makesrpm
+  DEPENDS dist)
+
+configure_file(release/makedpkg.in pkgscripts/makedpkg)
+configure_file(release/deb-control.in pkgscripts/deb-control)
+
+add_custom_target(deb sh pkgscripts/makedpkg
+  SOURCES pkgscripts/makedpkg)
+
+endif() # Linux
+
+
+###############################################################################
+# Windows installer (NullSoft Installer)
+###############################################################################
+
+if(WIN32)
+
+if(MSVC)
+  set(INST_PLATFORM "Visual C++")
+  set(INST_NAME ${CMAKE_PROJECT_NAME}-${VERSION}-vc)
+  set(INST_REG_NAME ${CMAKE_PROJECT_NAME})
+elseif(MINGW)
+  set(INST_PLATFORM GCC)
+  set(INST_NAME ${CMAKE_PROJECT_NAME}-${VERSION}-gcc)
+  set(INST_REG_NAME ${CMAKE_PROJECT_NAME}-gcc)
+  set(INST_DEFS -DGCC)
+endif()
+
+if(BITS EQUAL 64)
+  set(INST_PLATFORM "${INST_PLATFORM} 64-bit")
+  set(INST_NAME ${INST_NAME}64)
+  set(INST_REG_NAME ${INST_REG_NAME}64)
+  set(INST_DEFS ${INST_DEFS} -DWIN64)
+endif()
+
+if(WITH_JAVA)
+  set(INST_DEFS ${INST_DEFS} -DJAVA)
+endif()
+
+if(MSVC_IDE)
+  set(INST_DEFS ${INST_DEFS} "-DBUILDDIR=${CMAKE_CFG_INTDIR}\\")
+else()
+  set(INST_DEFS ${INST_DEFS} "-DBUILDDIR=")
+endif()
+
+string(REGEX REPLACE "/" "\\\\" INST_DIR ${CMAKE_INSTALL_PREFIX})
+
+configure_file(release/installer.nsi.in installer.nsi @ONLY)
+
+if(WITH_JAVA)
+  set(JAVA_DEPEND turbojpeg-java)
+endif()
+add_custom_target(installer
+  makensis -nocd ${INST_DEFS} installer.nsi
+  DEPENDS jpeg jpeg-static turbojpeg turbojpeg-static rdjpgcom wrjpgcom
+    cjpeg djpeg jpegtran tjbench ${JAVA_DEPEND}
+  SOURCES installer.nsi)
+
+endif() # WIN32
+
+
+###############################################################################
+# Cygwin Package
+###############################################################################
+
+if(CYGWIN)
+
+configure_file(release/makecygwinpkg.in pkgscripts/makecygwinpkg)
+
+add_custom_target(cygwinpkg sh pkgscripts/makecygwinpkg)
+
+endif() # CYGWIN
+
+
+###############################################################################
+# Mac DMG
+###############################################################################
+
+if(APPLE)
+
+set(DEFAULT_OSX_32BIT_BUILD ${CMAKE_SOURCE_DIR}/osxx86)
+set(OSX_32BIT_BUILD ${DEFAULT_OSX_32BIT_BUILD} CACHE PATH
+  "Directory containing 32-bit (i386) Mac build to include in universal binaries (default: ${DEFAULT_OSX_32BIT_BUILD})")
+set(DEFAULT_IOS_ARMV7_BUILD ${CMAKE_SOURCE_DIR}/iosarmv7)
+set(IOS_ARMV7_BUILD ${DEFAULT_IOS_ARMV7_BUILD} CACHE PATH
+  "Directory containing ARMv7 iOS build to include in universal binaries (default: ${DEFAULT_IOS_ARMV7_BUILD})")
+set(DEFAULT_IOS_ARMV7S_BUILD ${CMAKE_SOURCE_DIR}/iosarmv7s)
+set(IOS_ARMV7S_BUILD ${DEFAULT_IOS_ARMV7S_BUILD} CACHE PATH
+  "Directory containing ARMv7s iOS build to include in universal binaries (default: ${DEFAULT_IOS_ARMV7S_BUILD})")
+set(DEFAULT_IOS_ARMV8_BUILD ${CMAKE_SOURCE_DIR}/iosarmv8)
+set(IOS_ARMV8_BUILD ${DEFAULT_IOS_ARMV8_BUILD} CACHE PATH
+  "Directory containing ARMv8 iOS build to include in universal binaries (default: ${DEFAULT_IOS_ARMV8_BUILD})")
+
+set(OSX_APP_CERT_NAME "" CACHE STRING
+  "Name of the Developer ID Application certificate (in the macOS keychain) that should be used to sign the libjpeg-turbo DMG.  Leave this blank to generate an unsigned DMG.")
+set(OSX_INST_CERT_NAME "" CACHE STRING
+  "Name of the Developer ID Installer certificate (in the macOS keychain) that should be used to sign the libjpeg-turbo installer package.  Leave this blank to generate an unsigned package.")
+
+configure_file(release/makemacpkg.in pkgscripts/makemacpkg)
+configure_file(release/Distribution.xml.in pkgscripts/Distribution.xml)
+configure_file(release/uninstall.in pkgscripts/uninstall)
+
+add_custom_target(dmg sh pkgscripts/makemacpkg
+  SOURCES pkgscripts/makemacpkg)
+
+add_custom_target(udmg sh pkgscripts/makemacpkg universal
+  SOURCES pkgscripts/makemacpkg)
+
+endif() # APPLE
+
+
+###############################################################################
+# Generic
+###############################################################################
+
+add_custom_target(dist
+  COMMAND git archive --prefix=${CMAKE_PROJECT_NAME}-${VERSION}/ HEAD |
+    gzip > ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_PROJECT_NAME}-${VERSION}.tar.gz
+    WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR})
+
+configure_file(release/maketarball.in pkgscripts/maketarball)
+
+add_custom_target(tarball sh pkgscripts/maketarball
+  SOURCES pkgscripts/maketarball)
+
+configure_file(release/libjpeg.pc.in pkgscripts/libjpeg.pc @ONLY)
+
+configure_file(release/libturbojpeg.pc.in pkgscripts/libturbojpeg.pc @ONLY)

data/epeg/vendor/libjpeg-turbo-2.0.4/cmakescripts/GNUInstallDirs.cmake

@@ -0,0 +1,416 @@
+#.rst:
+# GNUInstallDirs
+# --------------
+#
+# Define GNU standard installation directories
+#
+# Provides install directory variables as defined by the
+# `GNU Coding Standards`_.
+#
+# .. _`GNU Coding Standards`: https://www.gnu.org/prep/standards/html_node/Directory-Variables.html
+#
+# Result Variables
+# ^^^^^^^^^^^^^^^^
+#
+# Inclusion of this module defines the following variables:
+#
+# ``CMAKE_INSTALL_<dir>``
+#
+#   Destination for files of a given type.  This value may be passed to
+#   the ``DESTINATION`` options of :command:`install` commands for the
+#   corresponding file type.
+#
+# ``CMAKE_INSTALL_FULL_<dir>``
+#
+#   The absolute path generated from the corresponding ``CMAKE_INSTALL_<dir>``
+#   value.  If the value is not already an absolute path, an absolute path
+#   is constructed typically by prepending the value of the
+#   :variable:`CMAKE_INSTALL_PREFIX` variable.  However, there are some
+#   `special cases`_ as documented below.
+#
+# where ``<dir>`` is one of:
+#
+# ``BINDIR``
+#   user executables (``bin``)
+# ``SBINDIR``
+#   system admin executables (``sbin``)
+# ``LIBEXECDIR``
+#   program executables (``libexec``)
+# ``SYSCONFDIR``
+#   read-only single-machine data (``etc``)
+# ``SHAREDSTATEDIR``
+#   modifiable architecture-independent data (``com``)
+# ``LOCALSTATEDIR``
+#   modifiable single-machine data (``var``)
+# ``LIBDIR``
+#   object code libraries (``lib`` or ``lib64``
+#   or ``lib/<multiarch-tuple>`` on Debian)
+# ``INCLUDEDIR``
+#   C header files (``include``)
+# ``OLDINCLUDEDIR``
+#   C header files for non-gcc (``/usr/include``)
+# ``DATAROOTDIR``
+#   read-only architecture-independent data root (``share``)
+# ``DATADIR``
+#   read-only architecture-independent data (``DATAROOTDIR``)
+# ``INFODIR``
+#   info documentation (``DATAROOTDIR/info``)
+# ``LOCALEDIR``
+#   locale-dependent data (``DATAROOTDIR/locale``)
+# ``MANDIR``
+#   man documentation (``DATAROOTDIR/man``)
+# ``DOCDIR``
+#   documentation root (``DATAROOTDIR/doc/PROJECT_NAME``)
+#
+# If the includer does not define a value the above-shown default will be
+# used and the value will appear in the cache for editing by the user.
+#
+# Special Cases
+# ^^^^^^^^^^^^^
+#
+# The following values of :variable:`CMAKE_INSTALL_PREFIX` are special:
+#
+# ``/``
+#
+#   For ``<dir>`` other than the ``SYSCONFDIR`` and ``LOCALSTATEDIR``,
+#   the value of ``CMAKE_INSTALL_<dir>`` is prefixed with ``usr/`` if
+#   it is not user-specified as an absolute path.  For example, the
+#   ``INCLUDEDIR`` value ``include`` becomes ``usr/include``.
+#   This is required by the `GNU Coding Standards`_, which state:
+#
+#     When building the complete GNU system, the prefix will be empty
+#     and ``/usr`` will be a symbolic link to ``/``.
+#
+# ``/usr``
+#
+#   For ``<dir>`` equal to ``SYSCONFDIR`` or ``LOCALSTATEDIR``, the
+#   ``CMAKE_INSTALL_FULL_<dir>`` is computed by prepending just ``/``
+#   to the value of ``CMAKE_INSTALL_<dir>`` if it is not user-specified
+#   as an absolute path.  For example, the ``SYSCONFDIR`` value ``etc``
+#   becomes ``/etc``.  This is required by the `GNU Coding Standards`_.
+#
+# ``/opt/...``
+#
+#   For ``<dir>`` equal to ``SYSCONFDIR`` or ``LOCALSTATEDIR``, the
+#   ``CMAKE_INSTALL_FULL_<dir>`` is computed by *appending* the prefix
+#   to the value of ``CMAKE_INSTALL_<dir>`` if it is not user-specified
+#   as an absolute path.  For example, the ``SYSCONFDIR`` value ``etc``
+#   becomes ``/etc/opt/...``.  This is defined by the
+#   `Filesystem Hierarchy Standard`_.
+#
+# .. _`Filesystem Hierarchy Standard`: https://refspecs.linuxfoundation.org/FHS_3.0/fhs/index.html
+#
+# Macros
+# ^^^^^^
+#
+# .. command:: GNUInstallDirs_get_absolute_install_dir
+#
+#   ::
+#
+#     GNUInstallDirs_get_absolute_install_dir(absvar var)
+#
+#   Set the given variable ``absvar`` to the absolute path contained
+#   within the variable ``var``.  This is to allow the computation of an
+#   absolute path, accounting for all the special cases documented
+#   above.  While this macro is used to compute the various
+#   ``CMAKE_INSTALL_FULL_<dir>`` variables, it is exposed publicly to
+#   allow users who create additional path variables to also compute
+#   absolute paths where necessary, using the same logic.
+
+#=============================================================================
+# Copyright 2016, 2019 D. R. Commander
+# Copyright 2016 Dmitry Marakasov
+# Copyright 2016 Roger Leigh
+# Copyright 2015 Alex Turbov
+# Copyright 2014 Rolf Eike Beer
+# Copyright 2014 Daniele E. Domenichelli
+# Copyright 2013 Dimitri John Ledkov
+# Copyright 2011 Alex Neundorf
+# Copyright 2011 Eric NOULARD
+# Copyright 2011, 2013-2015 Kitware, Inc.
+# Copyright 2011 Nikita Krupen'ko
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+#   notice, this list of conditions and the following disclaimer.
+#
+# * Redistributions in binary form must reproduce the above copyright
+#   notice, this list of conditions and the following disclaimer in the
+#   documentation and/or other materials provided with the distribution.
+#
+# * Neither the names of Kitware, Inc., the Insight Software Consortium,
+#   nor the names of their contributors may be used to endorse or promote
+#   products derived from this software without specific prior written
+#   permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#=============================================================================
+
+# Installation directories
+#
+
+macro(GNUInstallDirs_set_install_dir var docstring)
+  # If CMAKE_INSTALL_PREFIX changes and CMAKE_INSTALL_*DIR is still set to the
+  # default value, then modify it accordingly.  This presumes that the default
+  # value may change based on the prefix.
+
+  set(_GNUInstallDirs_CMAKE_INSTALL_FORCE_${var} "")
+  if(NOT DEFINED CMAKE_INSTALL_${var})
+    set(_GNUInstallDirs_CMAKE_INSTALL_DEFAULT_${var} 1 CACHE INTERNAL
+      "CMAKE_INSTALL_${var} has default value")
+  elseif(DEFINED _GNUInstallDirs_CMAKE_INSTALL_LAST_DEFAULT_${var} AND
+    NOT "${_GNUInstallDirs_CMAKE_INSTALL_LAST_DEFAULT_${var}}" STREQUAL
+      "${CMAKE_INSTALL_DEFAULT_${var}}" AND
+    _GNUInstallDirs_CMAKE_INSTALL_DEFAULT_${var} AND
+    "${_GNUInstallDirs_CMAKE_INSTALL_LAST_${var}}" STREQUAL
+      "${CMAKE_INSTALL_${var}}")
+    set(_GNUInstallDirs_CMAKE_INSTALL_FORCE_${var} "FORCE")
+  endif()
+
+  set(CMAKE_INSTALL_${var} "${CMAKE_INSTALL_DEFAULT_${var}}" CACHE PATH
+    "${docstring} (Default: ${CMAKE_INSTALL_DEFAULT_${var}})"
+    ${_GNUInstallDirs_CMAKE_INSTALL_FORCE_${var}})
+
+  if(NOT CMAKE_INSTALL_${var} STREQUAL CMAKE_INSTALL_DEFAULT_${var})
+    unset(_GNUInstallDirs_CMAKE_INSTALL_DEFAULT_${var} CACHE)
+  endif()
+
+  # Save for next run
+  set(_GNUInstallDirs_CMAKE_INSTALL_LAST_${var} "${CMAKE_INSTALL_${var}}"
+    CACHE INTERNAL "CMAKE_INSTALL_${var} during last run")
+  set(_GNUInstallDirs_CMAKE_INSTALL_LAST_DEFAULT_${var}
+    "${CMAKE_INSTALL_DEFAULT_${var}}" CACHE INTERNAL
+    "CMAKE_INSTALL_DEFAULT_${var} during last run")
+endmacro()
+
+if(NOT DEFINED CMAKE_INSTALL_DEFAULT_BINDIR)
+  set(CMAKE_INSTALL_DEFAULT_BINDIR "bin")
+endif()
+GNUInstallDirs_set_install_dir(BINDIR
+  "Directory into which user executables should be installed")
+
+if(NOT DEFINED CMAKE_INSTALL_DEFAULT_SBINDIR)
+  set(CMAKE_INSTALL_DEFAULT_SBINDIR "sbin")
+endif()
+GNUInstallDirs_set_install_dir(SBINDIR
+  "Directory into which system admin executables should be installed")
+
+if(NOT DEFINED CMAKE_INSTALL_DEFAULT_LIBEXECDIR)
+  set(CMAKE_INSTALL_DEFAULT_LIBEXECDIR "libexec")
+endif()
+GNUInstallDirs_set_install_dir(LIBEXECDIR
+  "Directory under which executables run by other programs should be installed")
+
+if(NOT DEFINED CMAKE_INSTALL_DEFAULT_SYSCONFDIR)
+  set(CMAKE_INSTALL_DEFAULT_SYSCONFDIR "etc")
+endif()
+GNUInstallDirs_set_install_dir(SYSCONFDIR
+  "Directory into which machine-specific read-only ASCII data and configuration files should be installed")
+
+if(NOT DEFINED CMAKE_INSTALL_DEFAULT_SHAREDSTATEDIR)
+  set(CMAKE_INSTALL_DEFAULT_SHAREDSTATEDIR "com")
+endif()
+GNUInstallDirs_set_install_dir(SHAREDSTATEDIR
+  "Directory into which architecture-independent run-time-modifiable data files should be installed")
+
+if(NOT DEFINED CMAKE_INSTALL_DEFAULT_LOCALSTATEDIR)
+  set(CMAKE_INSTALL_DEFAULT_LOCALSTATEDIR "var")
+endif()
+GNUInstallDirs_set_install_dir(LOCALSTATEDIR
+  "Directory into which machine-specific run-time-modifiable data files should be installed")
+
+if(NOT DEFINED CMAKE_INSTALL_DEFAULT_LIBDIR)
+  set(CMAKE_INSTALL_DEFAULT_LIBDIR "lib")
+  # Override this default 'lib' with 'lib64' iff:
+  #  - we are on Linux system but NOT cross-compiling
+  #  - we are NOT on debian
+  #  - we are on a 64 bits system
+  # reason is: amd64 ABI: http://www.x86-64.org/documentation/abi.pdf
+  # For Debian with multiarch, use 'lib/${CMAKE_LIBRARY_ARCHITECTURE}' if
+  # CMAKE_LIBRARY_ARCHITECTURE is set (which contains e.g. "i386-linux-gnu"
+  # and CMAKE_INSTALL_PREFIX is "/usr"
+  # See http://wiki.debian.org/Multiarch
+  if(CMAKE_SYSTEM_NAME MATCHES "^(Linux|kFreeBSD|GNU)$"
+      AND NOT CMAKE_CROSSCOMPILING)
+    if (EXISTS "/etc/debian_version") # is this a debian system ?
+      if(CMAKE_LIBRARY_ARCHITECTURE)
+        if("${CMAKE_INSTALL_PREFIX}" MATCHES "^/usr/?$")
+          set(CMAKE_INSTALL_DEFAULT_LIBDIR "lib/${CMAKE_LIBRARY_ARCHITECTURE}")
+        endif()
+      endif()
+    else() # not debian, rely on CMAKE_SIZEOF_VOID_P:
+      if(NOT DEFINED CMAKE_SIZEOF_VOID_P)
+        message(AUTHOR_WARNING
+          "Unable to determine default CMAKE_INSTALL_LIBDIR directory because no target architecture is known. "
+          "Please enable at least one language before including GNUInstallDirs.")
+      else()
+        if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
+          set(CMAKE_INSTALL_DEFAULT_LIBDIR "lib64")
+        endif()
+      endif()
+    endif()
+  endif()
+endif()
+GNUInstallDirs_set_install_dir(LIBDIR
+  "Directory into which object files and object code libraries should be installed")
+
+if(NOT DEFINED CMAKE_INSTALL_DEFAULT_INCLUDEDIR)
+  set(CMAKE_INSTALL_DEFAULT_INCLUDEDIR "include")
+endif()
+GNUInstallDirs_set_install_dir(INCLUDEDIR
+  "Directory into which C header files should be installed")
+
+if(NOT DEFINED CMAKE_INSTALL_DEFAULT_OLDINCLUDEDIR)
+  set(CMAKE_INSTALL_DEFAULT_OLDINCLUDEDIR "/usr/include")
+endif()
+GNUInstallDirs_set_install_dir(OLDINCLUDEDIR
+  PATH "Directory into which C header files for non-GCC compilers should be installed")
+
+if(NOT DEFINED CMAKE_INSTALL_DEFAULT_DATAROOTDIR)
+  set(CMAKE_INSTALL_DEFAULT_DATAROOTDIR "share")
+endif()
+GNUInstallDirs_set_install_dir(DATAROOTDIR
+  "The root of the directory tree for read-only architecture-independent data files")
+
+#-----------------------------------------------------------------------------
+# Values whose defaults are relative to DATAROOTDIR.  Store empty values in
+# the cache and store the defaults in local variables if the cache values are
+# not set explicitly.  This auto-updates the defaults as DATAROOTDIR changes.
+
+if(NOT DEFINED CMAKE_INSTALL_DEFAULT_DATADIR)
+  set(CMAKE_INSTALL_DEFAULT_DATADIR "<CMAKE_INSTALL_DATAROOTDIR>")
+endif()
+GNUInstallDirs_set_install_dir(DATADIR
+  "The directory under which read-only architecture-independent data files should be installed")
+
+if(NOT DEFINED CMAKE_INSTALL_DEFAULT_INFODIR)
+  if(CMAKE_SYSTEM_NAME MATCHES "^(.*BSD|DragonFly)$")
+    set(CMAKE_INSTALL_DEFAULT_INFODIR "info")
+  else()
+    set(CMAKE_INSTALL_DEFAULT_INFODIR "<CMAKE_INSTALL_DATAROOTDIR>/info")
+  endif()
+endif()
+GNUInstallDirs_set_install_dir(INFODIR
+  "The directory into which info documentation files should be installed")
+
+if(NOT DEFINED CMAKE_INSTALL_DEFAULT_MANDIR)
+  if(CMAKE_SYSTEM_NAME MATCHES "^(.*BSD|DragonFly)$")
+    set(CMAKE_INSTALL_DEFAULT_MANDIR "man")
+  else()
+    set(CMAKE_INSTALL_DEFAULT_MANDIR "<CMAKE_INSTALL_DATAROOTDIR>/man")
+  endif()
+endif()
+GNUInstallDirs_set_install_dir(MANDIR
+  "The directory under which man pages should be installed")
+
+if(NOT DEFINED CMAKE_INSTALL_DEFAULT_LOCALEDIR)
+  set(CMAKE_INSTALL_DEFAULT_LOCALEDIR "<CMAKE_INSTALL_DATAROOTDIR>/locale")
+endif()
+GNUInstallDirs_set_install_dir(LOCALEDIR
+  "The directory under which locale-specific message catalogs should be installed")
+
+if(NOT DEFINED CMAKE_INSTALL_DEFAULT_DOCDIR)
+  set(CMAKE_INSTALL_DEFAULT_DOCDIR "<CMAKE_INSTALL_DATAROOTDIR>/doc/${PROJECT_NAME}")
+endif()
+GNUInstallDirs_set_install_dir(DOCDIR
+  "The directory into which documentation files (other than info files) should be installed")
+
+#-----------------------------------------------------------------------------
+
+mark_as_advanced(
+  CMAKE_INSTALL_BINDIR
+  CMAKE_INSTALL_SBINDIR
+  CMAKE_INSTALL_LIBEXECDIR
+  CMAKE_INSTALL_SYSCONFDIR
+  CMAKE_INSTALL_SHAREDSTATEDIR
+  CMAKE_INSTALL_LOCALSTATEDIR
+  CMAKE_INSTALL_LIBDIR
+  CMAKE_INSTALL_INCLUDEDIR
+  CMAKE_INSTALL_OLDINCLUDEDIR
+  CMAKE_INSTALL_DATAROOTDIR
+  CMAKE_INSTALL_DATADIR
+  CMAKE_INSTALL_INFODIR
+  CMAKE_INSTALL_LOCALEDIR
+  CMAKE_INSTALL_MANDIR
+  CMAKE_INSTALL_DOCDIR
+  )
+
+macro(GNUInstallDirs_get_absolute_install_dir absvar var)
+  string(REGEX REPLACE "[<>]" "@" ${var} "${${var}}")
+  # Handle the specific case of an empty CMAKE_INSTALL_DATAROOTDIR
+  if(NOT CMAKE_INSTALL_DATAROOTDIR AND
+    ${var} MATCHES "\@CMAKE_INSTALL_DATAROOTDIR\@/")
+    string(CONFIGURE "${${var}}" ${var} @ONLY)
+    string(REGEX REPLACE "^/" "" ${var} "${${var}}")
+  else()
+    string(CONFIGURE "${${var}}" ${var} @ONLY)
+  endif()
+  if(NOT IS_ABSOLUTE "${${var}}")
+    # Handle special cases:
+    # - CMAKE_INSTALL_PREFIX == /
+    # - CMAKE_INSTALL_PREFIX == /usr
+    # - CMAKE_INSTALL_PREFIX == /opt/...
+    if("${CMAKE_INSTALL_PREFIX}" STREQUAL "/")
+      if("${dir}" STREQUAL "SYSCONFDIR" OR "${dir}" STREQUAL "LOCALSTATEDIR")
+        set(${absvar} "/${${var}}")
+      else()
+        if (NOT "${${var}}" MATCHES "^usr/")
+          set(${var} "usr/${${var}}")
+        endif()
+        set(${absvar} "/${${var}}")
+      endif()
+    elseif("${CMAKE_INSTALL_PREFIX}" MATCHES "^/usr/?$")
+      if("${dir}" STREQUAL "SYSCONFDIR" OR "${dir}" STREQUAL "LOCALSTATEDIR")
+        set(${absvar} "/${${var}}")
+      else()
+        set(${absvar} "${CMAKE_INSTALL_PREFIX}/${${var}}")
+      endif()
+    elseif("${CMAKE_INSTALL_PREFIX}" MATCHES "^/opt/.*")
+      if("${dir}" STREQUAL "SYSCONFDIR" OR "${dir}" STREQUAL "LOCALSTATEDIR")
+        set(${absvar} "/${${var}}${CMAKE_INSTALL_PREFIX}")
+      else()
+        set(${absvar} "${CMAKE_INSTALL_PREFIX}/${${var}}")
+      endif()
+    else()
+      set(${absvar} "${CMAKE_INSTALL_PREFIX}/${${var}}")
+    endif()
+  else()
+    set(${absvar} "${${var}}")
+  endif()
+  string(REGEX REPLACE "/$" "" ${absvar} "${${absvar}}")
+endmacro()
+
+# Result directories
+#
+foreach(dir
+    BINDIR
+    SBINDIR
+    LIBEXECDIR
+    SYSCONFDIR
+    SHAREDSTATEDIR
+    LOCALSTATEDIR
+    LIBDIR
+    INCLUDEDIR
+    OLDINCLUDEDIR
+    DATAROOTDIR
+    DATADIR
+    INFODIR
+    LOCALEDIR
+    MANDIR
+    DOCDIR
+    )
+  GNUInstallDirs_get_absolute_install_dir(CMAKE_INSTALL_FULL_${dir} CMAKE_INSTALL_${dir})
+endforeach()

data/epeg/vendor/libjpeg-turbo-2.0.4/cmakescripts/cmake_uninstall.cmake.in

@@ -0,0 +1,24 @@
+# This code is from the CMake FAQ
+
+if (NOT EXISTS "@CMAKE_BINARY_DIR@/install_manifest.txt")
+  message(FATAL_ERROR "Cannot find install manifest: \"@CMAKE_BINARY_DIR@/install_manifest.txt\"")
+endif(NOT EXISTS "@CMAKE_BINARY_DIR@/install_manifest.txt")
+
+file(READ "@CMAKE_BINARY_DIR@/install_manifest.txt" files)
+string(REGEX REPLACE "\n" ";" files "${files}")
+list(REVERSE files)
+foreach (file ${files})
+  message(STATUS "Uninstalling \"$ENV{DESTDIR}${file}\"")
+    if (EXISTS "$ENV{DESTDIR}${file}")
+      execute_process(
+        COMMAND "@CMAKE_COMMAND@" -E remove "$ENV{DESTDIR}${file}"
+        OUTPUT_VARIABLE rm_out
+        RESULT_VARIABLE rm_retval
+      )
+    if(NOT ${rm_retval} EQUAL 0)
+      message(FATAL_ERROR "Problem when removing \"$ENV{DESTDIR}${file}\"")
+    endif (NOT ${rm_retval} EQUAL 0)
+  else (EXISTS "$ENV{DESTDIR}${file}")
+    message(STATUS "File \"$ENV{DESTDIR}${file}\" does not exist.")
+  endif (EXISTS "$ENV{DESTDIR}${file}")
+endforeach(file)

data/epeg/vendor/libjpeg-turbo-2.0.4/cmakescripts/testclean.cmake

@@ -0,0 +1,41 @@
+file(GLOB FILES
+  testout*
+  *_GRAY_*.bmp
+  *_GRAY_*.png
+  *_GRAY_*.ppm
+  *_GRAY_*.jpg
+  *_GRAY.yuv
+  *_420_*.bmp
+  *_420_*.png
+  *_420_*.ppm
+  *_420_*.jpg
+  *_420.yuv
+  *_422_*.bmp
+  *_422_*.png
+  *_422_*.ppm
+  *_422_*.jpg
+  *_422.yuv
+  *_444_*.bmp
+  *_444_*.png
+  *_444_*.ppm
+  *_444_*.jpg
+  *_444.yuv
+  *_440_*.bmp
+  *_440_*.png
+  *_440_*.ppm
+  *_440_*.jpg
+  *_440.yuv
+  *_411_*.bmp
+  *_411_*.png
+  *_411_*.ppm
+  *_411_*.jpg
+  *_411.yuv
+  tjbenchtest*.log
+  tjexampletest*.log)
+
+if(NOT FILES STREQUAL "")
+  message(STATUS "Removing test files")
+  file(REMOVE ${FILES})
+else()
+  message(STATUS "No files to remove")
+endif()