epeg 1.0

data/epeg/vendor/libjpeg-turbo-2.0.4/jdct.h

@@ -0,0 +1,208 @@
+/*
+ * jdct.h
+ *
+ * This file was part of the Independent JPEG Group's software:
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * libjpeg-turbo Modifications:
+ * Copyright (C) 2015, D. R. Commander.
+ * For conditions of distribution and use, see the accompanying README.ijg
+ * file.
+ *
+ * This include file contains common declarations for the forward and
+ * inverse DCT modules.  These declarations are private to the DCT managers
+ * (jcdctmgr.c, jddctmgr.c) and the individual DCT algorithms.
+ * The individual DCT algorithms are kept in separate files to ease
+ * machine-dependent tuning (e.g., assembly coding).
+ */
+
+
+/*
+ * A forward DCT routine is given a pointer to a work area of type DCTELEM[];
+ * the DCT is to be performed in-place in that buffer.  Type DCTELEM is int
+ * for 8-bit samples, JLONG for 12-bit samples.  (NOTE: Floating-point DCT
+ * implementations use an array of type FAST_FLOAT, instead.)
+ * The DCT inputs are expected to be signed (range +-CENTERJSAMPLE).
+ * The DCT outputs are returned scaled up by a factor of 8; they therefore
+ * have a range of +-8K for 8-bit data, +-128K for 12-bit data.  This
+ * convention improves accuracy in integer implementations and saves some
+ * work in floating-point ones.
+ * Quantization of the output coefficients is done by jcdctmgr.c. This
+ * step requires an unsigned type and also one with twice the bits.
+ */
+
+#if BITS_IN_JSAMPLE == 8
+#ifndef WITH_SIMD
+typedef int DCTELEM;            /* 16 or 32 bits is fine */
+typedef unsigned int UDCTELEM;
+typedef unsigned long long UDCTELEM2;
+#else
+typedef short DCTELEM;          /* prefer 16 bit with SIMD for parellelism */
+typedef unsigned short UDCTELEM;
+typedef unsigned int UDCTELEM2;
+#endif
+#else
+typedef JLONG DCTELEM;          /* must have 32 bits */
+typedef unsigned long long UDCTELEM2;
+#endif
+
+
+/*
+ * An inverse DCT routine is given a pointer to the input JBLOCK and a pointer
+ * to an output sample array.  The routine must dequantize the input data as
+ * well as perform the IDCT; for dequantization, it uses the multiplier table
+ * pointed to by compptr->dct_table.  The output data is to be placed into the
+ * sample array starting at a specified column.  (Any row offset needed will
+ * be applied to the array pointer before it is passed to the IDCT code.)
+ * Note that the number of samples emitted by the IDCT routine is
+ * DCT_scaled_size * DCT_scaled_size.
+ */
+
+/* typedef inverse_DCT_method_ptr is declared in jpegint.h */
+
+/*
+ * Each IDCT routine has its own ideas about the best dct_table element type.
+ */
+
+typedef MULTIPLIER ISLOW_MULT_TYPE;  /* short or int, whichever is faster */
+#if BITS_IN_JSAMPLE == 8
+typedef MULTIPLIER IFAST_MULT_TYPE;  /* 16 bits is OK, use short if faster */
+#define IFAST_SCALE_BITS  2          /* fractional bits in scale factors */
+#else
+typedef JLONG IFAST_MULT_TYPE;       /* need 32 bits for scaled quantizers */
+#define IFAST_SCALE_BITS  13         /* fractional bits in scale factors */
+#endif
+typedef FAST_FLOAT FLOAT_MULT_TYPE;  /* preferred floating type */
+
+
+/*
+ * Each IDCT routine is responsible for range-limiting its results and
+ * converting them to unsigned form (0..MAXJSAMPLE).  The raw outputs could
+ * be quite far out of range if the input data is corrupt, so a bulletproof
+ * range-limiting step is required.  We use a mask-and-table-lookup method
+ * to do the combined operations quickly.  See the comments with
+ * prepare_range_limit_table (in jdmaster.c) for more info.
+ */
+
+#define IDCT_range_limit(cinfo)  ((cinfo)->sample_range_limit + CENTERJSAMPLE)
+
+#define RANGE_MASK  (MAXJSAMPLE * 4 + 3) /* 2 bits wider than legal samples */
+
+
+/* Extern declarations for the forward and inverse DCT routines. */
+
+EXTERN(void) jpeg_fdct_islow(DCTELEM *data);
+EXTERN(void) jpeg_fdct_ifast(DCTELEM *data);
+EXTERN(void) jpeg_fdct_float(FAST_FLOAT *data);
+
+EXTERN(void) jpeg_idct_islow(j_decompress_ptr cinfo,
+                             jpeg_component_info *compptr, JCOEFPTR coef_block,
+                             JSAMPARRAY output_buf, JDIMENSION output_col);
+EXTERN(void) jpeg_idct_ifast(j_decompress_ptr cinfo,
+                             jpeg_component_info *compptr, JCOEFPTR coef_block,
+                             JSAMPARRAY output_buf, JDIMENSION output_col);
+EXTERN(void) jpeg_idct_float(j_decompress_ptr cinfo,
+                             jpeg_component_info *compptr, JCOEFPTR coef_block,
+                             JSAMPARRAY output_buf, JDIMENSION output_col);
+EXTERN(void) jpeg_idct_7x7(j_decompress_ptr cinfo,
+                           jpeg_component_info *compptr, JCOEFPTR coef_block,
+                           JSAMPARRAY output_buf, JDIMENSION output_col);
+EXTERN(void) jpeg_idct_6x6(j_decompress_ptr cinfo,
+                           jpeg_component_info *compptr, JCOEFPTR coef_block,
+                           JSAMPARRAY output_buf, JDIMENSION output_col);
+EXTERN(void) jpeg_idct_5x5(j_decompress_ptr cinfo,
+                           jpeg_component_info *compptr, JCOEFPTR coef_block,
+                           JSAMPARRAY output_buf, JDIMENSION output_col);
+EXTERN(void) jpeg_idct_4x4(j_decompress_ptr cinfo,
+                           jpeg_component_info *compptr, JCOEFPTR coef_block,
+                           JSAMPARRAY output_buf, JDIMENSION output_col);
+EXTERN(void) jpeg_idct_3x3(j_decompress_ptr cinfo,
+                           jpeg_component_info *compptr, JCOEFPTR coef_block,
+                           JSAMPARRAY output_buf, JDIMENSION output_col);
+EXTERN(void) jpeg_idct_2x2(j_decompress_ptr cinfo,
+                           jpeg_component_info *compptr, JCOEFPTR coef_block,
+                           JSAMPARRAY output_buf, JDIMENSION output_col);
+EXTERN(void) jpeg_idct_1x1(j_decompress_ptr cinfo,
+                           jpeg_component_info *compptr, JCOEFPTR coef_block,
+                           JSAMPARRAY output_buf, JDIMENSION output_col);
+EXTERN(void) jpeg_idct_9x9(j_decompress_ptr cinfo,
+                           jpeg_component_info *compptr, JCOEFPTR coef_block,
+                           JSAMPARRAY output_buf, JDIMENSION output_col);
+EXTERN(void) jpeg_idct_10x10(j_decompress_ptr cinfo,
+                             jpeg_component_info *compptr, JCOEFPTR coef_block,
+                             JSAMPARRAY output_buf, JDIMENSION output_col);
+EXTERN(void) jpeg_idct_11x11(j_decompress_ptr cinfo,
+                             jpeg_component_info *compptr, JCOEFPTR coef_block,
+                             JSAMPARRAY output_buf, JDIMENSION output_col);
+EXTERN(void) jpeg_idct_12x12(j_decompress_ptr cinfo,
+                             jpeg_component_info *compptr, JCOEFPTR coef_block,
+                             JSAMPARRAY output_buf, JDIMENSION output_col);
+EXTERN(void) jpeg_idct_13x13(j_decompress_ptr cinfo,
+                             jpeg_component_info *compptr, JCOEFPTR coef_block,
+                             JSAMPARRAY output_buf, JDIMENSION output_col);
+EXTERN(void) jpeg_idct_14x14(j_decompress_ptr cinfo,
+                             jpeg_component_info *compptr, JCOEFPTR coef_block,
+                             JSAMPARRAY output_buf, JDIMENSION output_col);
+EXTERN(void) jpeg_idct_15x15(j_decompress_ptr cinfo,
+                             jpeg_component_info *compptr, JCOEFPTR coef_block,
+                             JSAMPARRAY output_buf, JDIMENSION output_col);
+EXTERN(void) jpeg_idct_16x16(j_decompress_ptr cinfo,
+                             jpeg_component_info *compptr, JCOEFPTR coef_block,
+                             JSAMPARRAY output_buf, JDIMENSION output_col);
+
+
+/*
+ * Macros for handling fixed-point arithmetic; these are used by many
+ * but not all of the DCT/IDCT modules.
+ *
+ * All values are expected to be of type JLONG.
+ * Fractional constants are scaled left by CONST_BITS bits.
+ * CONST_BITS is defined within each module using these macros,
+ * and may differ from one module to the next.
+ */
+
+#define ONE          ((JLONG)1)
+#define CONST_SCALE  (ONE << CONST_BITS)
+
+/* Convert a positive real constant to an integer scaled by CONST_SCALE.
+ * Caution: some C compilers fail to reduce "FIX(constant)" at compile time,
+ * thus causing a lot of useless floating-point operations at run time.
+ */
+
+#define FIX(x)  ((JLONG)((x) * CONST_SCALE + 0.5))
+
+/* Descale and correctly round a JLONG value that's scaled by N bits.
+ * We assume RIGHT_SHIFT rounds towards minus infinity, so adding
+ * the fudge factor is correct for either sign of X.
+ */
+
+#define DESCALE(x, n)  RIGHT_SHIFT((x) + (ONE << ((n) - 1)), n)
+
+/* Multiply a JLONG variable by a JLONG constant to yield a JLONG result.
+ * This macro is used only when the two inputs will actually be no more than
+ * 16 bits wide, so that a 16x16->32 bit multiply can be used instead of a
+ * full 32x32 multiply.  This provides a useful speedup on many machines.
+ * Unfortunately there is no way to specify a 16x16->32 multiply portably
+ * in C, but some C compilers will do the right thing if you provide the
+ * correct combination of casts.
+ */
+
+#ifdef SHORTxSHORT_32           /* may work if 'int' is 32 bits */
+#define MULTIPLY16C16(var, const)  (((INT16)(var)) * ((INT16)(const)))
+#endif
+#ifdef SHORTxLCONST_32          /* known to work with Microsoft C 6.0 */
+#define MULTIPLY16C16(var, const)  (((INT16)(var)) * ((JLONG)(const)))
+#endif
+
+#ifndef MULTIPLY16C16           /* default definition */
+#define MULTIPLY16C16(var, const)  ((var) * (const))
+#endif
+
+/* Same except both inputs are variables. */
+
+#ifdef SHORTxSHORT_32           /* may work if 'int' is 32 bits */
+#define MULTIPLY16V16(var1, var2)  (((INT16)(var1)) * ((INT16)(var2)))
+#endif
+
+#ifndef MULTIPLY16V16           /* default definition */
+#define MULTIPLY16V16(var1, var2)  ((var1) * (var2))
+#endif

data/epeg/vendor/libjpeg-turbo-2.0.4/jddctmgr.c

@@ -0,0 +1,352 @@
+/*
+ * jddctmgr.c
+ *
+ * This file was part of the Independent JPEG Group's software:
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2002-2010 by Guido Vollbeding.
+ * libjpeg-turbo Modifications:
+ * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
+ * Copyright (C) 2010, 2015, D. R. Commander.
+ * Copyright (C) 2013, MIPS Technologies, Inc., California.
+ * For conditions of distribution and use, see the accompanying README.ijg
+ * file.
+ *
+ * This file contains the inverse-DCT management logic.
+ * This code selects a particular IDCT implementation to be used,
+ * and it performs related housekeeping chores.  No code in this file
+ * is executed per IDCT step, only during output pass setup.
+ *
+ * Note that the IDCT routines are responsible for performing coefficient
+ * dequantization as well as the IDCT proper.  This module sets up the
+ * dequantization multiplier table needed by the IDCT routine.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdct.h"               /* Private declarations for DCT subsystem */
+#include "jsimddct.h"
+#include "jpegcomp.h"
+
+
+/*
+ * The decompressor input side (jdinput.c) saves away the appropriate
+ * quantization table for each component at the start of the first scan
+ * involving that component.  (This is necessary in order to correctly
+ * decode files that reuse Q-table slots.)
+ * When we are ready to make an output pass, the saved Q-table is converted
+ * to a multiplier table that will actually be used by the IDCT routine.
+ * The multiplier table contents are IDCT-method-dependent.  To support
+ * application changes in IDCT method between scans, we can remake the
+ * multiplier tables if necessary.
+ * In buffered-image mode, the first output pass may occur before any data
+ * has been seen for some components, and thus before their Q-tables have
+ * been saved away.  To handle this case, multiplier tables are preset
+ * to zeroes; the result of the IDCT will be a neutral gray level.
+ */
+
+
+/* Private subobject for this module */
+
+typedef struct {
+  struct jpeg_inverse_dct pub;  /* public fields */
+
+  /* This array contains the IDCT method code that each multiplier table
+   * is currently set up for, or -1 if it's not yet set up.
+   * The actual multiplier tables are pointed to by dct_table in the
+   * per-component comp_info structures.
+   */
+  int cur_method[MAX_COMPONENTS];
+} my_idct_controller;
+
+typedef my_idct_controller *my_idct_ptr;
+
+
+/* Allocated multiplier tables: big enough for any supported variant */
+
+typedef union {
+  ISLOW_MULT_TYPE islow_array[DCTSIZE2];
+#ifdef DCT_IFAST_SUPPORTED
+  IFAST_MULT_TYPE ifast_array[DCTSIZE2];
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  FLOAT_MULT_TYPE float_array[DCTSIZE2];
+#endif
+} multiplier_table;
+
+
+/* The current scaled-IDCT routines require ISLOW-style multiplier tables,
+ * so be sure to compile that code if either ISLOW or SCALING is requested.
+ */
+#ifdef DCT_ISLOW_SUPPORTED
+#define PROVIDE_ISLOW_TABLES
+#else
+#ifdef IDCT_SCALING_SUPPORTED
+#define PROVIDE_ISLOW_TABLES
+#endif
+#endif
+
+
+/*
+ * Prepare for an output pass.
+ * Here we select the proper IDCT routine for each component and build
+ * a matching multiplier table.
+ */
+
+METHODDEF(void)
+start_pass(j_decompress_ptr cinfo)
+{
+  my_idct_ptr idct = (my_idct_ptr)cinfo->idct;
+  int ci, i;
+  jpeg_component_info *compptr;
+  int method = 0;
+  inverse_DCT_method_ptr method_ptr = NULL;
+  JQUANT_TBL *qtbl;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Select the proper IDCT routine for this component's scaling */
+    switch (compptr->_DCT_scaled_size) {
+#ifdef IDCT_SCALING_SUPPORTED
+    case 1:
+      method_ptr = jpeg_idct_1x1;
+      method = JDCT_ISLOW;      /* jidctred uses islow-style table */
+      break;
+    case 2:
+      if (jsimd_can_idct_2x2())
+        method_ptr = jsimd_idct_2x2;
+      else
+        method_ptr = jpeg_idct_2x2;
+      method = JDCT_ISLOW;      /* jidctred uses islow-style table */
+      break;
+    case 3:
+      method_ptr = jpeg_idct_3x3;
+      method = JDCT_ISLOW;      /* jidctint uses islow-style table */
+      break;
+    case 4:
+      if (jsimd_can_idct_4x4())
+        method_ptr = jsimd_idct_4x4;
+      else
+        method_ptr = jpeg_idct_4x4;
+      method = JDCT_ISLOW;      /* jidctred uses islow-style table */
+      break;
+    case 5:
+      method_ptr = jpeg_idct_5x5;
+      method = JDCT_ISLOW;      /* jidctint uses islow-style table */
+      break;
+    case 6:
+#if defined(__mips__)
+      if (jsimd_can_idct_6x6())
+        method_ptr = jsimd_idct_6x6;
+      else
+#endif
+      method_ptr = jpeg_idct_6x6;
+      method = JDCT_ISLOW;      /* jidctint uses islow-style table */
+      break;
+    case 7:
+      method_ptr = jpeg_idct_7x7;
+      method = JDCT_ISLOW;      /* jidctint uses islow-style table */
+      break;
+#endif
+    case DCTSIZE:
+      switch (cinfo->dct_method) {
+#ifdef DCT_ISLOW_SUPPORTED
+      case JDCT_ISLOW:
+        if (jsimd_can_idct_islow())
+          method_ptr = jsimd_idct_islow;
+        else
+          method_ptr = jpeg_idct_islow;
+        method = JDCT_ISLOW;
+        break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+      case JDCT_IFAST:
+        if (jsimd_can_idct_ifast())
+          method_ptr = jsimd_idct_ifast;
+        else
+          method_ptr = jpeg_idct_ifast;
+        method = JDCT_IFAST;
+        break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+      case JDCT_FLOAT:
+        if (jsimd_can_idct_float())
+          method_ptr = jsimd_idct_float;
+        else
+          method_ptr = jpeg_idct_float;
+        method = JDCT_FLOAT;
+        break;
+#endif
+      default:
+        ERREXIT(cinfo, JERR_NOT_COMPILED);
+        break;
+      }
+      break;
+#ifdef IDCT_SCALING_SUPPORTED
+    case 9:
+      method_ptr = jpeg_idct_9x9;
+      method = JDCT_ISLOW;      /* jidctint uses islow-style table */
+      break;
+    case 10:
+      method_ptr = jpeg_idct_10x10;
+      method = JDCT_ISLOW;      /* jidctint uses islow-style table */
+      break;
+    case 11:
+      method_ptr = jpeg_idct_11x11;
+      method = JDCT_ISLOW;      /* jidctint uses islow-style table */
+      break;
+    case 12:
+#if defined(__mips__)
+      if (jsimd_can_idct_12x12())
+        method_ptr = jsimd_idct_12x12;
+      else
+#endif
+      method_ptr = jpeg_idct_12x12;
+      method = JDCT_ISLOW;      /* jidctint uses islow-style table */
+      break;
+    case 13:
+      method_ptr = jpeg_idct_13x13;
+      method = JDCT_ISLOW;      /* jidctint uses islow-style table */
+      break;
+    case 14:
+      method_ptr = jpeg_idct_14x14;
+      method = JDCT_ISLOW;      /* jidctint uses islow-style table */
+      break;
+    case 15:
+      method_ptr = jpeg_idct_15x15;
+      method = JDCT_ISLOW;      /* jidctint uses islow-style table */
+      break;
+    case 16:
+      method_ptr = jpeg_idct_16x16;
+      method = JDCT_ISLOW;      /* jidctint uses islow-style table */
+      break;
+#endif
+    default:
+      ERREXIT1(cinfo, JERR_BAD_DCTSIZE, compptr->_DCT_scaled_size);
+      break;
+    }
+    idct->pub.inverse_DCT[ci] = method_ptr;
+    /* Create multiplier table from quant table.
+     * However, we can skip this if the component is uninteresting
+     * or if we already built the table.  Also, if no quant table
+     * has yet been saved for the component, we leave the
+     * multiplier table all-zero; we'll be reading zeroes from the
+     * coefficient controller's buffer anyway.
+     */
+    if (!compptr->component_needed || idct->cur_method[ci] == method)
+      continue;
+    qtbl = compptr->quant_table;
+    if (qtbl == NULL)           /* happens if no data yet for component */
+      continue;
+    idct->cur_method[ci] = method;
+    switch (method) {
+#ifdef PROVIDE_ISLOW_TABLES
+    case JDCT_ISLOW:
+      {
+        /* For LL&M IDCT method, multipliers are equal to raw quantization
+         * coefficients, but are stored as ints to ensure access efficiency.
+         */
+        ISLOW_MULT_TYPE *ismtbl = (ISLOW_MULT_TYPE *)compptr->dct_table;
+        for (i = 0; i < DCTSIZE2; i++) {
+          ismtbl[i] = (ISLOW_MULT_TYPE)qtbl->quantval[i];
+        }
+      }
+      break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+    case JDCT_IFAST:
+      {
+        /* For AA&N IDCT method, multipliers are equal to quantization
+         * coefficients scaled by scalefactor[row]*scalefactor[col], where
+         *   scalefactor[0] = 1
+         *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+         * For integer operation, the multiplier table is to be scaled by
+         * IFAST_SCALE_BITS.
+         */
+        IFAST_MULT_TYPE *ifmtbl = (IFAST_MULT_TYPE *)compptr->dct_table;
+#define CONST_BITS  14
+        static const INT16 aanscales[DCTSIZE2] = {
+          /* precomputed values scaled up by 14 bits */
+          16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+          22725, 31521, 29692, 26722, 22725, 17855, 12299,  6270,
+          21407, 29692, 27969, 25172, 21407, 16819, 11585,  5906,
+          19266, 26722, 25172, 22654, 19266, 15137, 10426,  5315,
+          16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+          12873, 17855, 16819, 15137, 12873, 10114,  6967,  3552,
+           8867, 12299, 11585, 10426,  8867,  6967,  4799,  2446,
+           4520,  6270,  5906,  5315,  4520,  3552,  2446,  1247
+        };
+        SHIFT_TEMPS
+
+        for (i = 0; i < DCTSIZE2; i++) {
+          ifmtbl[i] = (IFAST_MULT_TYPE)
+            DESCALE(MULTIPLY16V16((JLONG)qtbl->quantval[i],
+                                  (JLONG)aanscales[i]),
+                    CONST_BITS - IFAST_SCALE_BITS);
+        }
+      }
+      break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+    case JDCT_FLOAT:
+      {
+        /* For float AA&N IDCT method, multipliers are equal to quantization
+         * coefficients scaled by scalefactor[row]*scalefactor[col], where
+         *   scalefactor[0] = 1
+         *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+         */
+        FLOAT_MULT_TYPE *fmtbl = (FLOAT_MULT_TYPE *)compptr->dct_table;
+        int row, col;
+        static const double aanscalefactor[DCTSIZE] = {
+          1.0, 1.387039845, 1.306562965, 1.175875602,
+          1.0, 0.785694958, 0.541196100, 0.275899379
+        };
+
+        i = 0;
+        for (row = 0; row < DCTSIZE; row++) {
+          for (col = 0; col < DCTSIZE; col++) {
+            fmtbl[i] = (FLOAT_MULT_TYPE)
+              ((double)qtbl->quantval[i] *
+               aanscalefactor[row] * aanscalefactor[col]);
+            i++;
+          }
+        }
+      }
+      break;
+#endif
+    default:
+      ERREXIT(cinfo, JERR_NOT_COMPILED);
+      break;
+    }
+  }
+}
+
+
+/*
+ * Initialize IDCT manager.
+ */
+
+GLOBAL(void)
+jinit_inverse_dct(j_decompress_ptr cinfo)
+{
+  my_idct_ptr idct;
+  int ci;
+  jpeg_component_info *compptr;
+
+  idct = (my_idct_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                sizeof(my_idct_controller));
+  cinfo->idct = (struct jpeg_inverse_dct *)idct;
+  idct->pub.start_pass = start_pass;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Allocate and pre-zero a multiplier table for each component */
+    compptr->dct_table =
+      (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                  sizeof(multiplier_table));
+    MEMZERO(compptr->dct_table, sizeof(multiplier_table));
+    /* Mark multiplier table not yet set up for any method */
+    idct->cur_method[ci] = -1;
+  }
+}