badline 0.12.1 → 0.13.0

data/lib/badline/vic/sprites.rb

@@ -1,282 +0,0 @@
-# frozen_string_literal: true
-
-require "badline/vic/collisions"
-require "badline/vic/register_log"
-require "badline/vic/sprite"
-require "badline/vic/sprites_state"
-
-module Badline
-  class VIC
-    class Sprites
-      include SavedState
-
-      # Pixels between the start of the cycle following a write and the
-      # point the new value shows. Each signal reaches the output on its own
-      # path: the colors feed the final mux, the sequencer inputs — X
-      # position, multicolor and expansion — sit furthest upstream, and the
-      # priority mux lands one pixel ahead of them.
-      COLOR_DELAY = 1
-      PRIORITY_DELAY = 6
-      SEQUENCER_DELAY = 7
-
-      # The beam position a CPU write in Bauer cycle 15 sees: the VIC has
-      # run column 13 and runs column 14, where MCBASE moves, next.
-      CRUNCH_X = 14 * 8
-
-      WRITE_DELAY = Array.new(2**6).tap do |delays|
-        (0x00..0x0e).step(2) { |reg| delays[reg] = SEQUENCER_DELAY }
-        [0x10, 0x1c, 0x1d].each { |reg| delays[reg] = SEQUENCER_DELAY }
-        delays[0x1b] = PRIORITY_DELAY
-        [0x25, 0x26, *0x27..0x2e].each { |reg| delays[reg] = COLOR_DELAY }
-      end.freeze
-
-      # The 8565's sprite sequencers take a multicolor change a pixel
-      # sooner than the 6569's.
-      WRITE_DELAY_8565 = WRITE_DELAY.dup.tap { |delays| delays[0x1c] = SEQUENCER_DELAY - 1 }.freeze
-
-      def initialize(registers, bank, width, model: :mos6569, region: Region::PAL)
-        @registers = registers
-        @write_delay = model == :mos8565 ? WRITE_DELAY_8565 : WRITE_DELAY
-        @bank = bank
-        @width = width
-        @bus = Sprite::InternalBus.new(bank, Sprite::Timing.new(region))
-        @sprites = Array.new(8) { |i| Sprite.new(i, registers, bank, @bus, model:) }
-        @collisions = Collisions.new(registers, width)
-        @hits = @collisions.hits
-        @win_color = Array.new(width, 0)
-        @win_priority = Array.new(width, false)
-        @palette = Array.new(4, 0)
-        @log = RegisterLog.new(registers)
-        @any_dma = false
-        @stopped_dma = false
-        @carry = Array.new(8) { [] }
-        @carry_next = Array.new(8) { [] }
-        @carried = false
-        @lo = width
-        @hi = 0
-        @sequenced = -1
-      end
-
-      def [](index) = @sprites[index]
-
-      # Pixels a sprite drew past the end of the last line land at the start
-      # of this one, which is when the beam reaches them.
-      def start_line
-        @bus.start_line(@registers[0x15].nonzero?)
-        @log.clear
-        @sprites.each(&:start_line)
-        @collisions.start_line
-        @sequenced = -1
-        @carry, @carry_next = @carry_next, @carry
-        @carry_next.each(&:clear)
-        @carried = @carry.any?(&:any?)
-      end
-
-      # Bauer cycle 16, two columns ahead like the compares: MCBASE takes
-      # MC for every sprite whose expansion flip-flop is set.
-      def advance_mcbase
-        @sprites.each(&:advance_mcbase) if @any_dma
-      end
-
-      # The end-of-sprite compare, a column after MCBASE moves. It is the
-      # only point a sprite's DMA stops, so the cached flag is settled here
-      # and set again by the compare that starts one.
-      def finish_mcbase
-        @stopped_dma = false
-        return unless @any_dma
-
-        running = @sprites.count(&:displaying?)
-        @sprites.each(&:finish_mcbase)
-        still = @sprites.count(&:displaying?)
-        @any_dma = still.positive?
-        @stopped_dma = still < running
-      end
-
-      # True when the last #finish_mcbase ended a DMA, so the BA columns
-      # have to be rebuilt without it.
-      def stopped_dma? = @stopped_dma
-
-      # Bauer cycle 56, after the second Y compare.
-      def toggle_expansion
-        @sprites.each(&:toggle_expansion) if @any_dma
-      end
-
-      # Run the Y/enable compare (Bauer cycles 55/56) for every sprite;
-      # returns true when any sprite turned its DMA on, so the BA columns
-      # can be rebuilt mid-line.
-      def check_dma(line, column)
-        return false if @registers[0x15].zero?
-
-        hit = @sprites.map { |sprite| sprite.check_dma(line, column) }.any?
-        @any_dma ||= hit
-        hit
-      end
-
-      # Not gated on the DMA flag, since this is where a display outlives its
-      # DMA. MC now points at the next row, which a sprite firing after its
-      # reload shows, so a line sequenced before this has to be redone.
-      def check_display(line)
-        @sprites.each { |sprite| sprite.check_display(line) }
-        @sequenced = -1
-      end
-
-      # A CPU access to a VIC register, in the cycle after the VIC's
-      # `column`.
-      def bus_data(column, value) = @bus.access(column, value)
-
-      # Not gated on the DMA flag: a row fetched at the start of the line
-      # still renders when cycle 16 ends the sprite.
-      def active? = @carried || @sprites.any?(&:rendering?)
-
-      # Record a mid-line write at the pixel where it becomes visible.
-      def log_change(reg, old, value, beam_x)
-        clear_y_expansion(old & ~value, beam_x) if reg == 0x17
-        delay = @write_delay[reg]
-        return unless delay && active?
-
-        @log.log(beam_x + delay, reg, old, value)
-      end
-
-      # Latch the collisions for every sprite pixel the beam has passed
-      # since the last fold.
-      def collide_upto(beam_x, mask)
-        upto = [beam_x, @width].min
-        return if upto <= @collisions.folded
-
-        sequence_line if active?
-        @collisions.fold(mask, upto, @lo, @hi)
-      end
-
-      def clear_collision(reg, beam_x) = @collisions.clear(reg, beam_x)
-
-      # End of line: fold in the pixels the beam reached since the last
-      # read, then paint the winners over the background. A line with no
-      # background to paint over — one in the vertical blank — still
-      # collides, so `colors` is nil there rather than absent.
-      def finish_line(colors, mask)
-        collide_upto(@width, mask)
-        colors ? apply(colors, mask) : clear_coverage
-      end
-
-      private
-
-      # A $d017 write that clears MxYE acts on the flip-flop at once, rather
-      # than from a column hook, and crunches in Bauer cycle 15.
-      def clear_y_expansion(cleared, beam_x)
-        crunch = beam_x == CRUNCH_X
-        @sprites.each do |sprite|
-          sprite.clear_y_expansion(crunch) if cleared.anybits?(1 << sprite.index)
-        end
-      end
-
-      # Replay the line for every sprite, filling the per-pixel coverage
-      # that both the fold and the composite read. A write logged later in
-      # the line can only move pixels past it, so re-running after the log
-      # grows leaves everything already folded where it was.
-      def sequence_line
-        return if @sequenced == @log.length
-
-        clear_coverage
-        @log.prepare
-        @sprites.each do |sprite|
-          sprite.sequence(@log)
-          merge(sprite)
-        end
-        @sequenced = @log.length
-      end
-
-      # Write one sprite's pixels into the coverage, picking up the color and
-      # priority registers as they stood at each pixel. The first sprite to
-      # claim a pixel wins (lowest index has priority); later ones only add
-      # their bit to it.
-      def merge(sprite)
-        bit = 1 << sprite.index
-        @carry_next[sprite.index].clear
-        @carry[sprite.index].each_slice(3) do |x, color, priority|
-          track(x, 1)
-          merge_pixel(x, color, bit, priority)
-        end
-        merge_run(sprite, sprite.leftmost, sprite.span, sprite.codes)
-        merge_run(sprite, sprite.reload_leftmost, sprite.reload_span, sprite.reload_codes)
-      end
-
-      def merge_run(sprite, leftmost, span, codes)
-        return if span.zero?
-
-        track(leftmost, span)
-        log = @log.empty? ? nil : @log
-        log&.rewind
-        merge_span(sprite, log, leftmost, span, codes)
-      end
-
-      def merge_span(sprite, log, leftmost, span, codes)
-        bit = 1 << sprite.index
-        palette = sprite.palette(log || @registers, @palette)
-        priority = (log || @registers)[0x1b].anybits?(bit)
-        pos = leftmost
-        boundary = log ? 0 : Float::INFINITY
-        index = 0
-        while index < span
-          if pos >= boundary
-            log.advance(pos)
-            sprite.palette(log, palette)
-            priority = log[0x1b].anybits?(bit)
-            boundary = log.next_x
-          end
-          code = codes[index]
-          place(pos, palette[code], bit, priority) unless code.zero?
-          index += 1
-          pos += 1
-        end
-      end
-
-      # A pixel past the end of the line belongs to the start of the next.
-      def place(pos, color, bit, priority)
-        if pos < @width
-          merge_pixel(pos, color, bit, priority)
-        else
-          @carry_next[bit.bit_length - 1].push(pos - @width, color, priority)
-        end
-      end
-
-      def track(left, span)
-        right = left + span
-        if right > @width
-          @lo = 0
-          @hi = @width
-        else
-          @lo = left if left < @lo
-          @hi = right if right > @hi
-        end
-      end
-
-      def merge_pixel(pos, color, bit, priority)
-        bits = @hits[pos]
-        if bits.zero?
-          @win_color[pos] = color
-          @win_priority[pos] = priority
-        end
-        @hits[pos] = bits | bit
-      end
-
-      def apply(colors, mask)
-        pos = @lo
-        while pos < @hi
-          unless @hits[pos].zero?
-            colors[pos] = @win_color[pos] unless @win_priority[pos] && mask[pos]
-            @hits[pos] = 0
-          end
-          pos += 1
-        end
-        @lo = @width
-        @hi = 0
-      end
-
-      def clear_coverage
-        @hits.fill(0, @lo, @hi - @lo) if @hi > @lo
-        @lo = @width
-        @hi = 0
-      end
-    end
-  end
-end

data/lib/badline/vic/sprites_state.rb

@@ -1,57 +0,0 @@
-# frozen_string_literal: true
-
-module Badline
-  class VIC
-    class Sprites
-      # The sprites' save_state and load_state.
-      module SavedState
-        # Whether any sprite's DMA runs, set after Sprite#restore_counters.
-        def update_any_dma
-          @any_dma = @sprites.any?(&:displaying?)
-        end
-
-        # The sprites, their shared bus, the collisions and the register log,
-        # then the line's coverage and the pixels carried into the next line,
-        # each as x, colour and priority.
-        def save_state(out)
-          out.boolean(@any_dma).boolean(@stopped_dma).boolean(@carried).int(@lo).int(@hi).int(@sequenced)
-          out.blob(@win_color).booleans(@win_priority).ints(@palette)
-          [@carry, @carry_next].each { |carry| carry.each { |pixels| save_carry(pixels, out) } }
-          @sprites.each { |sprite| sprite.save_state(out) }
-          @bus.save_state(out)
-          @collisions.save_state(out)
-          @log.save_state(out)
-        end
-
-        def load_state(input)
-          @any_dma = input.boolean?
-          @stopped_dma = input.boolean?
-          @carried = input.boolean?
-          @lo = input.int
-          @hi = input.int
-          @sequenced = input.int
-          input.blob_into(@win_color)
-          input.booleans_into(@win_priority)
-          input.ints_into(@palette)
-          [@carry, @carry_next].each { |carry| carry.each { |pixels| load_carry(pixels, input) } }
-          @sprites.each { |sprite| sprite.load_state(input) }
-          @bus.load_state(input)
-          @collisions.load_state(input)
-          @log.load_state(input)
-        end
-
-        private
-
-        def save_carry(pixels, out)
-          out.int(pixels.length / 3)
-          pixels.each_slice(3) { |x, color, priority| out.int(x).int(color).boolean(priority) }
-        end
-
-        def load_carry(pixels, input)
-          pixels.clear
-          input.int.times { pixels.push(input.int, input.int, input.boolean?) }
-        end
-      end
-    end
-  end
-end