paddlex 2.0.0rc4__py3-none-any.whl → 3.0.0__py3-none-any.whl

paddlex/ppdet/modeling/bbox_utils.py

@@ -1,464 +0,0 @@
-#   Copyright (c) 2020 PaddlePaddle Authors. All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-import math
-import paddle
-import paddle.nn.functional as F
-import math
-import numpy as np
-
-
-def bbox2delta(src_boxes, tgt_boxes, weights):
-    src_w = src_boxes[:, 2] - src_boxes[:, 0]
-    src_h = src_boxes[:, 3] - src_boxes[:, 1]
-    src_ctr_x = src_boxes[:, 0] + 0.5 * src_w
-    src_ctr_y = src_boxes[:, 1] + 0.5 * src_h
-
-    tgt_w = tgt_boxes[:, 2] - tgt_boxes[:, 0]
-    tgt_h = tgt_boxes[:, 3] - tgt_boxes[:, 1]
-    tgt_ctr_x = tgt_boxes[:, 0] + 0.5 * tgt_w
-    tgt_ctr_y = tgt_boxes[:, 1] + 0.5 * tgt_h
-
-    wx, wy, ww, wh = weights
-    dx = wx * (tgt_ctr_x - src_ctr_x) / src_w
-    dy = wy * (tgt_ctr_y - src_ctr_y) / src_h
-    dw = ww * paddle.log(tgt_w / src_w)
-    dh = wh * paddle.log(tgt_h / src_h)
-
-    deltas = paddle.stack((dx, dy, dw, dh), axis=1)
-    return deltas
-
-
-def delta2bbox(deltas, boxes, weights):
-    clip_scale = math.log(1000.0 / 16)
-
-    widths = boxes[:, 2] - boxes[:, 0]
-    heights = boxes[:, 3] - boxes[:, 1]
-    ctr_x = boxes[:, 0] + 0.5 * widths
-    ctr_y = boxes[:, 1] + 0.5 * heights
-
-    wx, wy, ww, wh = weights
-    dx = deltas[:, 0::4] / wx
-    dy = deltas[:, 1::4] / wy
-    dw = deltas[:, 2::4] / ww
-    dh = deltas[:, 3::4] / wh
-    # Prevent sending too large values into paddle.exp()
-    dw = paddle.clip(dw, max=clip_scale)
-    dh = paddle.clip(dh, max=clip_scale)
-
-    pred_ctr_x = dx * widths.unsqueeze(1) + ctr_x.unsqueeze(1)
-    pred_ctr_y = dy * heights.unsqueeze(1) + ctr_y.unsqueeze(1)
-    pred_w = paddle.exp(dw) * widths.unsqueeze(1)
-    pred_h = paddle.exp(dh) * heights.unsqueeze(1)
-
-    pred_boxes = []
-    pred_boxes.append(pred_ctr_x - 0.5 * pred_w)
-    pred_boxes.append(pred_ctr_y - 0.5 * pred_h)
-    pred_boxes.append(pred_ctr_x + 0.5 * pred_w)
-    pred_boxes.append(pred_ctr_y + 0.5 * pred_h)
-    pred_boxes = paddle.stack(pred_boxes, axis=-1)
-
-    return pred_boxes
-
-
-def expand_bbox(bboxes, scale):
-    w_half = (bboxes[:, 2] - bboxes[:, 0]) * .5
-    h_half = (bboxes[:, 3] - bboxes[:, 1]) * .5
-    x_c = (bboxes[:, 2] + bboxes[:, 0]) * .5
-    y_c = (bboxes[:, 3] + bboxes[:, 1]) * .5
-
-    w_half *= scale
-    h_half *= scale
-
-    bboxes_exp = np.zeros(bboxes.shape, dtype=np.float32)
-    bboxes_exp[:, 0] = x_c - w_half
-    bboxes_exp[:, 2] = x_c + w_half
-    bboxes_exp[:, 1] = y_c - h_half
-    bboxes_exp[:, 3] = y_c + h_half
-
-    return bboxes_exp
-
-
-def clip_bbox(boxes, im_shape):
-    h, w = im_shape[0], im_shape[1]
-    x1 = boxes[:, 0].clip(0, w)
-    y1 = boxes[:, 1].clip(0, h)
-    x2 = boxes[:, 2].clip(0, w)
-    y2 = boxes[:, 3].clip(0, h)
-    return paddle.stack([x1, y1, x2, y2], axis=1)
-
-
-def nonempty_bbox(boxes, min_size=0, return_mask=False):
-    w = boxes[:, 2] - boxes[:, 0]
-    h = boxes[:, 3] - boxes[:, 1]
-    mask = paddle.logical_and(w > min_size, w > min_size)
-    if return_mask:
-        return mask
-    keep = paddle.nonzero(mask).flatten()
-    return keep
-
-
-def bbox_area(boxes):
-    return (boxes[:, 2] - boxes[:, 0]) * (boxes[:, 3] - boxes[:, 1])
-
-
-def bbox_overlaps(boxes1, boxes2):
-    """
-    Calculate overlaps between boxes1 and boxes2
-
-    Args:
-        boxes1 (Tensor): boxes with shape [M, 4]
-        boxes2 (Tensor): boxes with shape [N, 4]
-
-    Return:
-        overlaps (Tensor): overlaps between boxes1 and boxes2 with shape [M, N]
-    """
-    M = boxes1.shape[0]
-    N = boxes2.shape[0]
-    if M * N == 0:
-        return paddle.zeros([M, N], dtype='float32')
-    area1 = bbox_area(boxes1)
-    area2 = bbox_area(boxes2)
-
-    xy_max = paddle.minimum(
-        paddle.unsqueeze(boxes1, 1)[:, :, 2:], boxes2[:, 2:])
-    xy_min = paddle.maximum(
-        paddle.unsqueeze(boxes1, 1)[:, :, :2], boxes2[:, :2])
-    width_height = xy_max - xy_min
-    width_height = width_height.clip(min=0)
-    inter = width_height.prod(axis=2)
-
-    overlaps = paddle.where(inter > 0, inter /
-                            (paddle.unsqueeze(area1, 1) + area2 - inter),
-                            paddle.zeros_like(inter))
-    return overlaps
-
-
-def xywh2xyxy(box):
-    x, y, w, h = box
-    x1 = x - w * 0.5
-    y1 = y - h * 0.5
-    x2 = x + w * 0.5
-    y2 = y + h * 0.5
-    return [x1, y1, x2, y2]
-
-
-def make_grid(h, w, dtype):
-    yv, xv = paddle.meshgrid([paddle.arange(h), paddle.arange(w)])
-    return paddle.stack((xv, yv), 2).cast(dtype=dtype)
-
-
-def decode_yolo(box, anchor, downsample_ratio):
-    """decode yolo box
-
-    Args:
-        box (list): [x, y, w, h], all have the shape [b, na, h, w, 1]
-        anchor (list): anchor with the shape [na, 2]
-        downsample_ratio (int): downsample ratio, default 32
-        scale (float): scale, default 1.
-
-    Return:
-        box (list): decoded box, [x, y, w, h], all have the shape [b, na, h, w, 1]
-    """
-    x, y, w, h = box
-    na, grid_h, grid_w = x.shape[1:4]
-    grid = make_grid(grid_h, grid_w, x.dtype).reshape(
-        (1, 1, grid_h, grid_w, 2))
-    x1 = (x + grid[:, :, :, :, 0:1]) / grid_w
-    y1 = (y + grid[:, :, :, :, 1:2]) / grid_h
-
-    anchor = paddle.to_tensor(anchor)
-    anchor = paddle.cast(anchor, x.dtype)
-    anchor = anchor.reshape((1, na, 1, 1, 2))
-    w1 = paddle.exp(w) * anchor[:, :, :, :, 0:1] / (downsample_ratio * grid_w)
-    h1 = paddle.exp(h) * anchor[:, :, :, :, 1:2] / (downsample_ratio * grid_h)
-
-    return [x1, y1, w1, h1]
-
-
-def iou_similarity(box1, box2, eps=1e-9):
-    """Calculate iou of box1 and box2
-
-    Args:
-        box1 (Tensor): box with the shape [N, M1, 4]
-        box2 (Tensor): box with the shape [N, M2, 4]
-
-    Return:
-        iou (Tensor): iou between box1 and box2 with the shape [N, M1, M2]
-    """
-    box1 = box1.unsqueeze(2)  # [N, M1, 4] -> [N, M1, 1, 4]
-    box2 = box2.unsqueeze(1)  # [N, M2, 4] -> [N, 1, M2, 4]
-    px1y1, px2y2 = box1[:, :, :, 0:2], box1[:, :, :, 2:4]
-    gx1y1, gx2y2 = box2[:, :, :, 0:2], box2[:, :, :, 2:4]
-    x1y1 = paddle.maximum(px1y1, gx1y1)
-    x2y2 = paddle.minimum(px2y2, gx2y2)
-    overlap = (x2y2 - x1y1).clip(0).prod(-1)
-    area1 = (px2y2 - px1y1).clip(0).prod(-1)
-    area2 = (gx2y2 - gx1y1).clip(0).prod(-1)
-    union = area1 + area2 - overlap + eps
-    return overlap / union
-
-
-def bbox_iou(box1, box2, giou=False, diou=False, ciou=False, eps=1e-9):
-    """calculate the iou of box1 and box2
-
-    Args:
-        box1 (list): [x, y, w, h], all have the shape [b, na, h, w, 1]
-        box2 (list): [x, y, w, h], all have the shape [b, na, h, w, 1]
-        giou (bool): whether use giou or not, default False
-        diou (bool): whether use diou or not, default False
-        ciou (bool): whether use ciou or not, default False
-        eps (float): epsilon to avoid divide by zero
-
-    Return:
-        iou (Tensor): iou of box1 and box1, with the shape [b, na, h, w, 1]
-    """
-    px1, py1, px2, py2 = box1
-    gx1, gy1, gx2, gy2 = box2
-    x1 = paddle.maximum(px1, gx1)
-    y1 = paddle.maximum(py1, gy1)
-    x2 = paddle.minimum(px2, gx2)
-    y2 = paddle.minimum(py2, gy2)
-
-    overlap = ((x2 - x1).clip(0)) * ((y2 - y1).clip(0))
-
-    area1 = (px2 - px1) * (py2 - py1)
-    area1 = area1.clip(0)
-
-    area2 = (gx2 - gx1) * (gy2 - gy1)
-    area2 = area2.clip(0)
-
-    union = area1 + area2 - overlap + eps
-    iou = overlap / union
-
-    if giou or ciou or diou:
-        # convex w, h
-        cw = paddle.maximum(px2, gx2) - paddle.minimum(px1, gx1)
-        ch = paddle.maximum(py2, gy2) - paddle.minimum(py1, gy1)
-        if giou:
-            c_area = cw * ch + eps
-            return iou - (c_area - union) / c_area
-        else:
-            # convex diagonal squared
-            c2 = cw**2 + ch**2 + eps
-            # center distance
-            rho2 = (
-                (px1 + px2 - gx1 - gx2)**2 + (py1 + py2 - gy1 - gy2)**2) / 4
-            if diou:
-                return iou - rho2 / c2
-            else:
-                w1, h1 = px2 - px1, py2 - py1 + eps
-                w2, h2 = gx2 - gx1, gy2 - gy1 + eps
-                delta = paddle.atan(w1 / h1) - paddle.atan(w2 / h2)
-                v = (4 / math.pi**2) * paddle.pow(delta, 2)
-                alpha = v / (1 + eps - iou + v)
-                alpha.stop_gradient = True
-                return iou - (rho2 / c2 + v * alpha)
-    else:
-        return iou
-
-
-def poly2rbox(polys):
-    """
-    poly:[x0,y0,x1,y1,x2,y2,x3,y3]
-    to
-    rotated_boxes:[x_ctr,y_ctr,w,h,angle]
-    """
-    rotated_boxes = []
-    for poly in polys:
-        poly = np.array(poly[:8], dtype=np.float32)
-
-        pt1 = (poly[0], poly[1])
-        pt2 = (poly[2], poly[3])
-        pt3 = (poly[4], poly[5])
-        pt4 = (poly[6], poly[7])
-
-        edge1 = np.sqrt((pt1[0] - pt2[0]) * (pt1[0] - pt2[0]) + (pt1[1] - pt2[
-            1]) * (pt1[1] - pt2[1]))
-        edge2 = np.sqrt((pt2[0] - pt3[0]) * (pt2[0] - pt3[0]) + (pt2[1] - pt3[
-            1]) * (pt2[1] - pt3[1]))
-
-        width = max(edge1, edge2)
-        height = min(edge1, edge2)
-
-        rbox_angle = 0
-        if edge1 > edge2:
-            rbox_angle = np.arctan2(
-                np.float(pt2[1] - pt1[1]), np.float(pt2[0] - pt1[0]))
-        elif edge2 >= edge1:
-            rbox_angle = np.arctan2(
-                np.float(pt4[1] - pt1[1]), np.float(pt4[0] - pt1[0]))
-
-        def norm_angle(angle, range=[-np.pi / 4, np.pi]):
-            return (angle - range[0]) % range[1] + range[0]
-
-        rbox_angle = norm_angle(rbox_angle)
-
-        x_ctr = np.float(pt1[0] + pt3[0]) / 2
-        y_ctr = np.float(pt1[1] + pt3[1]) / 2
-        rotated_box = np.array([x_ctr, y_ctr, width, height, rbox_angle])
-        rotated_boxes.append(rotated_box)
-    ret_rotated_boxes = np.array(rotated_boxes)
-    assert ret_rotated_boxes.shape[1] == 5
-    return ret_rotated_boxes
-
-
-def cal_line_length(point1, point2):
-    import math
-    return math.sqrt(
-        math.pow(point1[0] - point2[0], 2) + math.pow(point1[1] - point2[1],
-                                                      2))
-
-
-def get_best_begin_point_single(coordinate):
-    x1, y1, x2, y2, x3, y3, x4, y4 = coordinate
-    xmin = min(x1, x2, x3, x4)
-    ymin = min(y1, y2, y3, y4)
-    xmax = max(x1, x2, x3, x4)
-    ymax = max(y1, y2, y3, y4)
-    combinate = [[[x1, y1], [x2, y2], [x3, y3], [x4, y4]],
-                 [[x4, y4], [x1, y1], [x2, y2], [x3, y3]],
-                 [[x3, y3], [x4, y4], [x1, y1], [x2, y2]],
-                 [[x2, y2], [x3, y3], [x4, y4], [x1, y1]]]
-    dst_coordinate = [[xmin, ymin], [xmax, ymin], [xmax, ymax], [xmin, ymax]]
-    force = 100000000.0
-    force_flag = 0
-    for i in range(4):
-        temp_force = cal_line_length(combinate[i][0], dst_coordinate[0]) \
-                     + cal_line_length(combinate[i][1], dst_coordinate[1]) \
-                     + cal_line_length(combinate[i][2], dst_coordinate[2]) \
-                     + cal_line_length(combinate[i][3], dst_coordinate[3])
-        if temp_force < force:
-            force = temp_force
-            force_flag = i
-    if force_flag != 0:
-        pass
-    return np.array(combinate[force_flag]).reshape(8)
-
-
-def rbox2poly_np(rrects):
-    """
-    rrect:[x_ctr,y_ctr,w,h,angle]
-    to
-    poly:[x0,y0,x1,y1,x2,y2,x3,y3]
-    """
-    polys = []
-    for i in range(rrects.shape[0]):
-        rrect = rrects[i]
-        # x_ctr, y_ctr, width, height, angle = rrect[:5]
-        x_ctr = rrect[0]
-        y_ctr = rrect[1]
-        width = rrect[2]
-        height = rrect[3]
-        angle = rrect[4]
-        tl_x, tl_y, br_x, br_y = -width / 2, -height / 2, width / 2, height / 2
-        rect = np.array([[tl_x, br_x, br_x, tl_x], [tl_y, tl_y, br_y, br_y]])
-        R = np.array([[np.cos(angle), -np.sin(angle)],
-                      [np.sin(angle), np.cos(angle)]])
-        poly = R.dot(rect)
-        x0, x1, x2, x3 = poly[0, :4] + x_ctr
-        y0, y1, y2, y3 = poly[1, :4] + y_ctr
-        poly = np.array([x0, y0, x1, y1, x2, y2, x3, y3], dtype=np.float32)
-        poly = get_best_begin_point_single(poly)
-        polys.append(poly)
-    polys = np.array(polys)
-    return polys
-
-
-def rbox2poly(rrects):
-    """
-    rrect:[x_ctr,y_ctr,w,h,angle]
-    to
-    poly:[x0,y0,x1,y1,x2,y2,x3,y3]
-    """
-    N = paddle.shape(rrects)[0]
-
-    x_ctr = rrects[:, 0]
-    y_ctr = rrects[:, 1]
-    width = rrects[:, 2]
-    height = rrects[:, 3]
-    angle = rrects[:, 4]
-
-    tl_x, tl_y, br_x, br_y = -width * 0.5, -height * 0.5, width * 0.5, height * 0.5
-
-    normal_rects = paddle.stack(
-        [tl_x, br_x, br_x, tl_x, tl_y, tl_y, br_y, br_y], axis=0)
-    normal_rects = paddle.reshape(normal_rects, [2, 4, N])
-    normal_rects = paddle.transpose(normal_rects, [2, 0, 1])
-
-    sin, cos = paddle.sin(angle), paddle.cos(angle)
-    # M.shape=[N,2,2]
-    M = paddle.stack([cos, -sin, sin, cos], axis=0)
-    M = paddle.reshape(M, [2, 2, N])
-    M = paddle.transpose(M, [2, 0, 1])
-
-    # polys:[N,8]
-    polys = paddle.matmul(M, normal_rects)
-    polys = paddle.transpose(polys, [2, 1, 0])
-    polys = paddle.reshape(polys, [-1, N])
-    polys = paddle.transpose(polys, [1, 0])
-
-    tmp = paddle.stack(
-        [x_ctr, y_ctr, x_ctr, y_ctr, x_ctr, y_ctr, x_ctr, y_ctr], axis=1)
-    polys = polys + tmp
-    return polys
-
-
-def bbox_iou_np_expand(box1, box2, x1y1x2y2=True, eps=1e-16):
-    """
-    Calculate the iou of box1 and box2 with numpy.
-
-    Args:
-        box1 (ndarray): [N, 4]
-        box2 (ndarray): [M, 4], usually N != M
-        x1y1x2y2 (bool): whether in x1y1x2y2 stype, default True
-        eps (float): epsilon to avoid divide by zero
-    Return:
-        iou (ndarray): iou of box1 and box2, [N, M]
-    """
-    N, M = len(box1), len(box2)  # usually N != M
-    if x1y1x2y2:
-        b1_x1, b1_y1 = box1[:, 0], box1[:, 1]
-        b1_x2, b1_y2 = box1[:, 2], box1[:, 3]
-        b2_x1, b2_y1 = box2[:, 0], box2[:, 1]
-        b2_x2, b2_y2 = box2[:, 2], box2[:, 3]
-    else:
-        # cxcywh style
-        # Transform from center and width to exact coordinates
-        b1_x1, b1_x2 = box1[:, 0] - box1[:, 2] / 2, box1[:, 0] + box1[:, 2] / 2
-        b1_y1, b1_y2 = box1[:, 1] - box1[:, 3] / 2, box1[:, 1] + box1[:, 3] / 2
-        b2_x1, b2_x2 = box2[:, 0] - box2[:, 2] / 2, box2[:, 0] + box2[:, 2] / 2
-        b2_y1, b2_y2 = box2[:, 1] - box2[:, 3] / 2, box2[:, 1] + box2[:, 3] / 2
-
-    # get the coordinates of the intersection rectangle
-    inter_rect_x1 = np.zeros((N, M), dtype=np.float32)
-    inter_rect_y1 = np.zeros((N, M), dtype=np.float32)
-    inter_rect_x2 = np.zeros((N, M), dtype=np.float32)
-    inter_rect_y2 = np.zeros((N, M), dtype=np.float32)
-    for i in range(len(box2)):
-        inter_rect_x1[:, i] = np.maximum(b1_x1, b2_x1[i])
-        inter_rect_y1[:, i] = np.maximum(b1_y1, b2_y1[i])
-        inter_rect_x2[:, i] = np.minimum(b1_x2, b2_x2[i])
-        inter_rect_y2[:, i] = np.minimum(b1_y2, b2_y2[i])
-    # Intersection area
-    inter_area = np.maximum(inter_rect_x2 - inter_rect_x1, 0) * np.maximum(
-        inter_rect_y2 - inter_rect_y1, 0)
-    # Union Area
-    b1_area = np.repeat(
-        ((b1_x2 - b1_x1) * (b1_y2 - b1_y1)).reshape(-1, 1), M, axis=-1)
-    b2_area = np.repeat(
-        ((b2_x2 - b2_x1) * (b2_y2 - b2_y1)).reshape(1, -1), N, axis=0)
-
-    ious = inter_area / (b1_area + b2_area - inter_area + eps)
-    return ious

paddlex/ppdet/modeling/heads/__init__.py

@@ -1,41 +0,0 @@
-# Copyright (c) 2020 PaddlePaddle Authors. All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-from . import bbox_head
-from . import mask_head
-from . import yolo_head
-from . import roi_extractor
-from . import ssd_head
-from . import fcos_head
-from . import solov2_head
-from . import ttf_head
-from . import cascade_head
-from . import face_head
-from . import s2anet_head
-from . import keypoint_hrhrnet_head
-from . import centernet_head
-
-from .bbox_head import *
-from .mask_head import *
-from .yolo_head import *
-from .roi_extractor import *
-from .ssd_head import *
-from .fcos_head import *
-from .solov2_head import *
-from .ttf_head import *
-from .cascade_head import *
-from .face_head import *
-from .s2anet_head import *
-from .keypoint_hrhrnet_head import *
-from .centernet_head import *