paddlex 2.0.0rc4__py3-none-any.whl → 3.0.0__py3-none-any.whl

paddlex/ops/iou3d_nms/iou3d_nms_kernel.cu

@@ -0,0 +1,484 @@
+// Copyright (c) 2024 PaddlePaddle Authors. All Rights Reserved.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+/*
+3D IoU Calculation and Rotated NMS(modified from 2D NMS written by others)
+Written by Shaoshuai Shi
+All Rights Reserved 2019-2020.
+*/
+
+#include <stdio.h>
+#define THREADS_PER_BLOCK 16
+#define DIVUP(m, n) ((m) / (n) + ((m) % (n) > 0))
+
+// #define DEBUG
+const int THREADS_PER_BLOCK_NMS = sizeof(int64_t) * 8;
+const float EPS = 1e-8;
+struct Point {
+  float x, y;
+  __device__ Point() {}
+  __device__ Point(double _x, double _y) { x = _x, y = _y; }
+
+  __device__ void set(float _x, float _y) {
+    x = _x;
+    y = _y;
+  }
+
+  __device__ Point operator+(const Point &b) const {
+    return Point(x + b.x, y + b.y);
+  }
+
+  __device__ Point operator-(const Point &b) const {
+    return Point(x - b.x, y - b.y);
+  }
+};
+
+__device__ inline float cross(const Point &a, const Point &b) {
+  return a.x * b.y - a.y * b.x;
+}
+
+__device__ inline float cross(const Point &p1, const Point &p2,
+                              const Point &p0) {
+  return (p1.x - p0.x) * (p2.y - p0.y) - (p2.x - p0.x) * (p1.y - p0.y);
+}
+
+__device__ int check_rect_cross(const Point &p1, const Point &p2,
+                                const Point &q1, const Point &q2) {
+  int ret = min(p1.x, p2.x) <= max(q1.x, q2.x) &&
+            min(q1.x, q2.x) <= max(p1.x, p2.x) &&
+            min(p1.y, p2.y) <= max(q1.y, q2.y) &&
+            min(q1.y, q2.y) <= max(p1.y, p2.y);
+  return ret;
+}
+
+__device__ inline int check_in_box2d(const float *box, const Point &p) {
+  // params: (7) [x, y, z, dx, dy, dz, heading]
+  const float MARGIN = 1e-2;
+
+  float center_x = box[0], center_y = box[1];
+  float angle_cos = cos(-box[6]),
+        angle_sin =
+            sin(-box[6]); // rotate the point in the opposite direction of box
+  float rot_x = (p.x - center_x) * angle_cos + (p.y - center_y) * (-angle_sin);
+  float rot_y = (p.x - center_x) * angle_sin + (p.y - center_y) * angle_cos;
+
+  return (fabs(rot_x) < box[3] / 2 + MARGIN &&
+          fabs(rot_y) < box[4] / 2 + MARGIN);
+}
+
+__device__ inline int intersection(const Point &p1, const Point &p0,
+                                   const Point &q1, const Point &q0,
+                                   Point &ans) {
+  // fast exclusion
+  if (check_rect_cross(p0, p1, q0, q1) == 0)
+    return 0;
+
+  // check cross standing
+  float s1 = cross(q0, p1, p0);
+  float s2 = cross(p1, q1, p0);
+  float s3 = cross(p0, q1, q0);
+  float s4 = cross(q1, p1, q0);
+
+  if (!(s1 * s2 > 0 && s3 * s4 > 0))
+    return 0;
+
+  // calculate intersection of two lines
+  float s5 = cross(q1, p1, p0);
+  if (fabs(s5 - s1) > EPS) {
+    ans.x = (s5 * q0.x - s1 * q1.x) / (s5 - s1);
+    ans.y = (s5 * q0.y - s1 * q1.y) / (s5 - s1);
+
+  } else {
+    float a0 = p0.y - p1.y, b0 = p1.x - p0.x, c0 = p0.x * p1.y - p1.x * p0.y;
+    float a1 = q0.y - q1.y, b1 = q1.x - q0.x, c1 = q0.x * q1.y - q1.x * q0.y;
+    float D = a0 * b1 - a1 * b0;
+
+    ans.x = (b0 * c1 - b1 * c0) / D;
+    ans.y = (a1 * c0 - a0 * c1) / D;
+  }
+
+  return 1;
+}
+
+__device__ inline void rotate_around_center(const Point &center,
+                                            const float angle_cos,
+                                            const float angle_sin, Point &p) {
+  float new_x =
+      (p.x - center.x) * angle_cos + (p.y - center.y) * (-angle_sin) + center.x;
+  float new_y =
+      (p.x - center.x) * angle_sin + (p.y - center.y) * angle_cos + center.y;
+  p.set(new_x, new_y);
+}
+
+__device__ inline int point_cmp(const Point &a, const Point &b,
+                                const Point &center) {
+  return atan2(a.y - center.y, a.x - center.x) >
+         atan2(b.y - center.y, b.x - center.x);
+}
+
+__device__ inline float box_overlap(const float *box_a, const float *box_b) {
+  // params box_a: [x, y, z, dx, dy, dz, heading]
+  // params box_b: [x, y, z, dx, dy, dz, heading]
+
+  float a_angle = box_a[6], b_angle = box_b[6];
+  float a_dx_half = box_a[3] / 2, b_dx_half = box_b[3] / 2,
+        a_dy_half = box_a[4] / 2, b_dy_half = box_b[4] / 2;
+  float a_x1 = box_a[0] - a_dx_half, a_y1 = box_a[1] - a_dy_half;
+  float a_x2 = box_a[0] + a_dx_half, a_y2 = box_a[1] + a_dy_half;
+  float b_x1 = box_b[0] - b_dx_half, b_y1 = box_b[1] - b_dy_half;
+  float b_x2 = box_b[0] + b_dx_half, b_y2 = box_b[1] + b_dy_half;
+
+  Point center_a(box_a[0], box_a[1]);
+  Point center_b(box_b[0], box_b[1]);
+
+#ifdef DEBUG
+  printf(
+      "a: (%.3f, %.3f, %.3f, %.3f, %.3f), b: (%.3f, %.3f, %.3f, %.3f, %.3f)\n",
+      a_x1, a_y1, a_x2, a_y2, a_angle, b_x1, b_y1, b_x2, b_y2, b_angle);
+  printf("center a: (%.3f, %.3f), b: (%.3f, %.3f)\n", center_a.x, center_a.y,
+         center_b.x, center_b.y);
+#endif
+
+  Point box_a_corners[5];
+  box_a_corners[0].set(a_x1, a_y1);
+  box_a_corners[1].set(a_x2, a_y1);
+  box_a_corners[2].set(a_x2, a_y2);
+  box_a_corners[3].set(a_x1, a_y2);
+
+  Point box_b_corners[5];
+  box_b_corners[0].set(b_x1, b_y1);
+  box_b_corners[1].set(b_x2, b_y1);
+  box_b_corners[2].set(b_x2, b_y2);
+  box_b_corners[3].set(b_x1, b_y2);
+
+  // get oriented corners
+  float a_angle_cos = cos(a_angle), a_angle_sin = sin(a_angle);
+  float b_angle_cos = cos(b_angle), b_angle_sin = sin(b_angle);
+
+  for (int k = 0; k < 4; k++) {
+#ifdef DEBUG
+    printf("before corner %d: a(%.3f, %.3f), b(%.3f, %.3f) \n", k,
+           box_a_corners[k].x, box_a_corners[k].y, box_b_corners[k].x,
+           box_b_corners[k].y);
+#endif
+    rotate_around_center(center_a, a_angle_cos, a_angle_sin, box_a_corners[k]);
+    rotate_around_center(center_b, b_angle_cos, b_angle_sin, box_b_corners[k]);
+#ifdef DEBUG
+    printf("corner %d: a(%.3f, %.3f), b(%.3f, %.3f) \n", k, box_a_corners[k].x,
+           box_a_corners[k].y, box_b_corners[k].x, box_b_corners[k].y);
+#endif
+  }
+
+  box_a_corners[4] = box_a_corners[0];
+  box_b_corners[4] = box_b_corners[0];
+
+  // get intersection of lines
+  Point cross_points[16];
+  Point poly_center;
+  int cnt = 0, flag = 0;
+
+  poly_center.set(0, 0);
+  for (int i = 0; i < 4; i++) {
+    for (int j = 0; j < 4; j++) {
+      flag = intersection(box_a_corners[i + 1], box_a_corners[i],
+                          box_b_corners[j + 1], box_b_corners[j],
+                          cross_points[cnt]);
+      if (flag) {
+        poly_center = poly_center + cross_points[cnt];
+        cnt++;
+#ifdef DEBUG
+        printf(
+            "Cross points (%.3f, %.3f): a(%.3f, %.3f)->(%.3f, %.3f), b(%.3f, "
+            "%.3f)->(%.3f, %.3f) \n",
+            cross_points[cnt - 1].x, cross_points[cnt - 1].y,
+            box_a_corners[i].x, box_a_corners[i].y, box_a_corners[i + 1].x,
+            box_a_corners[i + 1].y, box_b_corners[i].x, box_b_corners[i].y,
+            box_b_corners[i + 1].x, box_b_corners[i + 1].y);
+#endif
+      }
+    }
+  }
+
+  // check corners
+  for (int k = 0; k < 4; k++) {
+    if (check_in_box2d(box_a, box_b_corners[k])) {
+      poly_center = poly_center + box_b_corners[k];
+      cross_points[cnt] = box_b_corners[k];
+      cnt++;
+#ifdef DEBUG
+      printf("b corners in a: corner_b(%.3f, %.3f)", cross_points[cnt - 1].x,
+             cross_points[cnt - 1].y);
+#endif
+    }
+    if (check_in_box2d(box_b, box_a_corners[k])) {
+      poly_center = poly_center + box_a_corners[k];
+      cross_points[cnt] = box_a_corners[k];
+      cnt++;
+#ifdef DEBUG
+      printf("a corners in b: corner_a(%.3f, %.3f)", cross_points[cnt - 1].x,
+             cross_points[cnt - 1].y);
+#endif
+    }
+  }
+
+  poly_center.x /= cnt;
+  poly_center.y /= cnt;
+
+  // sort the points of polygon
+  Point temp;
+  for (int j = 0; j < cnt - 1; j++) {
+    for (int i = 0; i < cnt - j - 1; i++) {
+      if (point_cmp(cross_points[i], cross_points[i + 1], poly_center)) {
+        temp = cross_points[i];
+        cross_points[i] = cross_points[i + 1];
+        cross_points[i + 1] = temp;
+      }
+    }
+  }
+
+#ifdef DEBUG
+  printf("cnt=%d\n", cnt);
+  for (int i = 0; i < cnt; i++) {
+    printf("All cross point %d: (%.3f, %.3f)\n", i, cross_points[i].x,
+           cross_points[i].y);
+  }
+#endif
+
+  // get the overlap areas
+  float area = 0;
+  for (int k = 0; k < cnt - 1; k++) {
+    area += cross(cross_points[k] - cross_points[0],
+                  cross_points[k + 1] - cross_points[0]);
+  }
+
+  return fabs(area) / 2.0;
+}
+
+__device__ inline float iou_bev(const float *box_a, const float *box_b) {
+  // params box_a: [x, y, z, dx, dy, dz, heading]
+  // params box_b: [x, y, z, dx, dy, dz, heading]
+  float sa = box_a[3] * box_a[4];
+  float sb = box_b[3] * box_b[4];
+  float s_overlap = box_overlap(box_a, box_b);
+  return s_overlap / fmaxf(sa + sb - s_overlap, EPS);
+}
+
+__global__ void boxes_overlap_kernel(const int num_a, const float *boxes_a,
+                                     const int num_b, const float *boxes_b,
+                                     float *ans_overlap) {
+  // params boxes_a: (N, 7) [x, y, z, dx, dy, dz, heading]
+  // params boxes_b: (M, 7) [x, y, z, dx, dy, dz, heading]
+  const int a_idx = blockIdx.y * THREADS_PER_BLOCK + threadIdx.y;
+  const int b_idx = blockIdx.x * THREADS_PER_BLOCK + threadIdx.x;
+
+  if (a_idx >= num_a || b_idx >= num_b) {
+    return;
+  }
+  const float *cur_box_a = boxes_a + a_idx * 7;
+  const float *cur_box_b = boxes_b + b_idx * 7;
+  float s_overlap = box_overlap(cur_box_a, cur_box_b);
+  ans_overlap[a_idx * num_b + b_idx] = s_overlap;
+}
+
+__global__ void boxes_iou_bev_kernel(const int num_a, const float *boxes_a,
+                                     const int num_b, const float *boxes_b,
+                                     float *ans_iou) {
+  // params boxes_a: (N, 7) [x, y, z, dx, dy, dz, heading]
+  // params boxes_b: (M, 7) [x, y, z, dx, dy, dz, heading]
+  const int a_idx = blockIdx.y * THREADS_PER_BLOCK + threadIdx.y;
+  const int b_idx = blockIdx.x * THREADS_PER_BLOCK + threadIdx.x;
+
+  if (a_idx >= num_a || b_idx >= num_b) {
+    return;
+  }
+
+  const float *cur_box_a = boxes_a + a_idx * 7;
+  const float *cur_box_b = boxes_b + b_idx * 7;
+  float cur_iou_bev = iou_bev(cur_box_a, cur_box_b);
+  ans_iou[a_idx * num_b + b_idx] = cur_iou_bev;
+}
+
+__global__ void nms_kernel(const int boxes_num, const float nms_overlap_thresh,
+                           const float *boxes, int64_t *mask) {
+  // params: boxes (N, 7) [x, y, z, dx, dy, dz, heading]
+  // params: mask (N, N/THREADS_PER_BLOCK_NMS)
+
+  const int row_start = blockIdx.y;
+  const int col_start = blockIdx.x;
+
+  // if (row_start > col_start) return;
+
+  const int row_size = fminf(boxes_num - row_start * THREADS_PER_BLOCK_NMS,
+                             THREADS_PER_BLOCK_NMS);
+  const int col_size = fminf(boxes_num - col_start * THREADS_PER_BLOCK_NMS,
+                             THREADS_PER_BLOCK_NMS);
+
+  __shared__ float block_boxes[THREADS_PER_BLOCK_NMS * 7];
+
+  if (threadIdx.x < col_size) {
+    block_boxes[threadIdx.x * 7 + 0] =
+        boxes[(THREADS_PER_BLOCK_NMS * col_start + threadIdx.x) * 7 + 0];
+    block_boxes[threadIdx.x * 7 + 1] =
+        boxes[(THREADS_PER_BLOCK_NMS * col_start + threadIdx.x) * 7 + 1];
+    block_boxes[threadIdx.x * 7 + 2] =
+        boxes[(THREADS_PER_BLOCK_NMS * col_start + threadIdx.x) * 7 + 2];
+    block_boxes[threadIdx.x * 7 + 3] =
+        boxes[(THREADS_PER_BLOCK_NMS * col_start + threadIdx.x) * 7 + 3];
+    block_boxes[threadIdx.x * 7 + 4] =
+        boxes[(THREADS_PER_BLOCK_NMS * col_start + threadIdx.x) * 7 + 4];
+    block_boxes[threadIdx.x * 7 + 5] =
+        boxes[(THREADS_PER_BLOCK_NMS * col_start + threadIdx.x) * 7 + 5];
+    block_boxes[threadIdx.x * 7 + 6] =
+        boxes[(THREADS_PER_BLOCK_NMS * col_start + threadIdx.x) * 7 + 6];
+  }
+  __syncthreads();
+
+  if (threadIdx.x < row_size) {
+    const int cur_box_idx = THREADS_PER_BLOCK_NMS * row_start + threadIdx.x;
+    const float *cur_box = boxes + cur_box_idx * 7;
+
+    int i = 0;
+    int64_t t = 0;
+    int start = 0;
+    if (row_start == col_start) {
+      start = threadIdx.x + 1;
+    }
+    for (i = start; i < col_size; i++) {
+      if (iou_bev(cur_box, block_boxes + i * 7) > nms_overlap_thresh) {
+        t |= 1ULL << i;
+      }
+    }
+    const int col_blocks = DIVUP(boxes_num, THREADS_PER_BLOCK_NMS);
+    mask[cur_box_idx * col_blocks + col_start] = t;
+  }
+}
+
+__device__ inline float iou_normal(float const *const a, float const *const b) {
+  // params: a: [x, y, z, dx, dy, dz, heading]
+  // params: b: [x, y, z, dx, dy, dz, heading]
+
+  float left = fmaxf(a[0] - a[3] / 2, b[0] - b[3] / 2),
+        right = fminf(a[0] + a[3] / 2, b[0] + b[3] / 2);
+  float top = fmaxf(a[1] - a[4] / 2, b[1] - b[4] / 2),
+        bottom = fminf(a[1] + a[4] / 2, b[1] + b[4] / 2);
+  float width = fmaxf(right - left, 0.f), height = fmaxf(bottom - top, 0.f);
+  float interS = width * height;
+  float Sa = a[3] * a[4];
+  float Sb = b[3] * b[4];
+  return interS / fmaxf(Sa + Sb - interS, EPS);
+}
+
+__global__ void nms_normal_kernel(const int boxes_num,
+                                  const float nms_overlap_thresh,
+                                  const float *boxes, int64_t *mask) {
+  // params: boxes (N, 7) [x, y, z, dx, dy, dz, heading]
+  // params: mask (N, N/THREADS_PER_BLOCK_NMS)
+
+  const int row_start = blockIdx.y;
+  const int col_start = blockIdx.x;
+
+  // if (row_start > col_start) return;
+
+  const int row_size = fminf(boxes_num - row_start * THREADS_PER_BLOCK_NMS,
+                             THREADS_PER_BLOCK_NMS);
+  const int col_size = fminf(boxes_num - col_start * THREADS_PER_BLOCK_NMS,
+                             THREADS_PER_BLOCK_NMS);
+
+  __shared__ float block_boxes[THREADS_PER_BLOCK_NMS * 7];
+
+  if (threadIdx.x < col_size) {
+    block_boxes[threadIdx.x * 7 + 0] =
+        boxes[(THREADS_PER_BLOCK_NMS * col_start + threadIdx.x) * 7 + 0];
+    block_boxes[threadIdx.x * 7 + 1] =
+        boxes[(THREADS_PER_BLOCK_NMS * col_start + threadIdx.x) * 7 + 1];
+    block_boxes[threadIdx.x * 7 + 2] =
+        boxes[(THREADS_PER_BLOCK_NMS * col_start + threadIdx.x) * 7 + 2];
+    block_boxes[threadIdx.x * 7 + 3] =
+        boxes[(THREADS_PER_BLOCK_NMS * col_start + threadIdx.x) * 7 + 3];
+    block_boxes[threadIdx.x * 7 + 4] =
+        boxes[(THREADS_PER_BLOCK_NMS * col_start + threadIdx.x) * 7 + 4];
+    block_boxes[threadIdx.x * 7 + 5] =
+        boxes[(THREADS_PER_BLOCK_NMS * col_start + threadIdx.x) * 7 + 5];
+    block_boxes[threadIdx.x * 7 + 6] =
+        boxes[(THREADS_PER_BLOCK_NMS * col_start + threadIdx.x) * 7 + 6];
+  }
+  __syncthreads();
+
+  if (threadIdx.x < row_size) {
+    const int cur_box_idx = THREADS_PER_BLOCK_NMS * row_start + threadIdx.x;
+    const float *cur_box = boxes + cur_box_idx * 7;
+
+    int i = 0;
+    int64_t t = 0;
+    int start = 0;
+    if (row_start == col_start) {
+      start = threadIdx.x + 1;
+    }
+    for (i = start; i < col_size; i++) {
+      if (iou_normal(cur_box, block_boxes + i * 7) > nms_overlap_thresh) {
+        t |= 1ULL << i;
+      }
+    }
+    const int col_blocks = DIVUP(boxes_num, THREADS_PER_BLOCK_NMS);
+    mask[cur_box_idx * col_blocks + col_start] = t;
+  }
+}
+
+void BoxesOverlapLauncher(const cudaStream_t &stream, const int num_a,
+                          const float *boxes_a, const int num_b,
+                          const float *boxes_b, float *ans_overlap) {
+  dim3 blocks(
+      DIVUP(num_b, THREADS_PER_BLOCK),
+      DIVUP(num_a, THREADS_PER_BLOCK)); // blockIdx.x(col), blockIdx.y(row)
+  dim3 threads(THREADS_PER_BLOCK, THREADS_PER_BLOCK);
+
+  boxes_overlap_kernel<<<blocks, threads, 0, stream>>>(num_a, boxes_a, num_b,
+                                                       boxes_b, ans_overlap);
+#ifdef DEBUG
+  cudaDeviceSynchronize(); // for using printf in kernel function
+#endif
+}
+
+void BoxesIouBevLauncher(const cudaStream_t &stream, const int num_a,
+                         const float *boxes_a, const int num_b,
+                         const float *boxes_b, float *ans_iou) {
+  dim3 blocks(
+      DIVUP(num_b, THREADS_PER_BLOCK),
+      DIVUP(num_a, THREADS_PER_BLOCK)); // blockIdx.x(col), blockIdx.y(row)
+  dim3 threads(THREADS_PER_BLOCK, THREADS_PER_BLOCK);
+
+  boxes_iou_bev_kernel<<<blocks, threads, 0, stream>>>(num_a, boxes_a, num_b,
+                                                       boxes_b, ans_iou);
+#ifdef DEBUG
+  cudaDeviceSynchronize(); // for using printf in kernel function
+#endif
+}
+
+void NmsLauncher(const cudaStream_t &stream, const float *boxes, int64_t *mask,
+                 int boxes_num, float nms_overlap_thresh) {
+  dim3 blocks(DIVUP(boxes_num, THREADS_PER_BLOCK_NMS),
+              DIVUP(boxes_num, THREADS_PER_BLOCK_NMS));
+  dim3 threads(THREADS_PER_BLOCK_NMS);
+  nms_kernel<<<blocks, threads, 0, stream>>>(boxes_num, nms_overlap_thresh,
+                                             boxes, mask);
+}
+
+void NmsNormalLauncher(const cudaStream_t &stream, const float *boxes,
+                       int64_t *mask, int boxes_num, float nms_overlap_thresh) {
+  dim3 blocks(DIVUP(boxes_num, THREADS_PER_BLOCK_NMS),
+              DIVUP(boxes_num, THREADS_PER_BLOCK_NMS));
+  dim3 threads(THREADS_PER_BLOCK_NMS);
+  nms_normal_kernel<<<blocks, threads, 0, stream>>>(
+      boxes_num, nms_overlap_thresh, boxes, mask);
+}

paddlex/ops/setup.py

@@ -0,0 +1,37 @@
+# Copyright (c) 2024 PaddlePaddle Authors. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import paddle
+from paddle.utils.cpp_extension import CppExtension, CUDAExtension, setup
+
+from paddlex.ops import custom_ops
+
+for op_name, op_dict in custom_ops.items():
+    sources = op_dict.pop("sources", [])
+    flags = None
+
+    if paddle.device.is_compiled_with_cuda():
+        extension = CUDAExtension
+        flags = {"cxx": ["-DPADDLE_WITH_CUDA"]}
+        if "extra_cuda_cflags" in op_dict:
+            flags["nvcc"] = op_dict.pop("extra_cuda_cflags")
+    else:
+        sources = filter(lambda x: x.endswith("cu"), sources)
+        extension = CppExtension
+
+    if len(sources) == 0:
+        continue
+
+    extension = extension(sources=sources, extra_compile_args=flags)
+    setup(name=op_name, ext_modules=extension)