homeassistant 2025.9.4__py3-none-any.whl → 2025.10.0b0__py3-none-any.whl

homeassistant/components/mqtt/const.py

@@ -38,8 +38,12 @@ CONF_CODE_FORMAT = "code_format"
 CONF_CODE_TRIGGER_REQUIRED = "code_trigger_required"
 CONF_COMMAND_TEMPLATE = "command_template"
 CONF_COMMAND_TOPIC = "command_topic"
+CONF_CONTENT_TYPE = "content_type"
+CONF_DEFAULT_ENTITY_ID = "default_entity_id"
 CONF_DISCOVERY_PREFIX = "discovery_prefix"
 CONF_ENCODING = "encoding"
+CONF_IMAGE_ENCODING = "image_encoding"
+CONF_IMAGE_TOPIC = "image_topic"
 CONF_JSON_ATTRS_TOPIC = "json_attributes_topic"
 CONF_JSON_ATTRS_TEMPLATE = "json_attributes_template"
 CONF_KEEPALIVE = "keepalive"
@@ -230,6 +234,8 @@ CONF_TILT_MIN = "tilt_min"
 CONF_TILT_OPEN_POSITION = "tilt_opened_value"
 CONF_TILT_STATE_OPTIMISTIC = "tilt_optimistic"
 CONF_TRANSITION = "transition"
+CONF_URL_TEMPLATE = "url_template"
+CONF_URL_TOPIC = "url_topic"
 CONF_XY_COMMAND_TEMPLATE = "xy_command_template"
 CONF_XY_COMMAND_TOPIC = "xy_command_topic"
 CONF_XY_STATE_TOPIC = "xy_state_topic"

homeassistant/components/mqtt/device_automation.py

@@ -25,7 +25,9 @@ DISCOVERY_SCHEMA = MQTT_BASE_SCHEMA.extend(
 )
 
 
-async def async_setup_entry(hass: HomeAssistant, config_entry: ConfigEntry) -> None:
+async def async_setup_mqtt_device_automation_entry(
+    hass: HomeAssistant, config_entry: ConfigEntry
+) -> None:
     """Set up MQTT device automation dynamically through MQTT discovery."""
 
     setup = functools.partial(_async_setup_automation, hass, config_entry=config_entry)

homeassistant/components/mqtt/entity.py

@@ -29,6 +29,7 @@ from homeassistant.const import (
     CONF_MODEL_ID,
     CONF_NAME,
     CONF_UNIQUE_ID,
+    CONF_URL,
     CONF_VALUE_TEMPLATE,
 )
 from homeassistant.core import Event, HassJobType, HomeAssistant, callback
@@ -74,6 +75,7 @@ from .const import (
     CONF_AVAILABILITY_TOPIC,
     CONF_CONFIGURATION_URL,
     CONF_CONNECTIONS,
+    CONF_DEFAULT_ENTITY_ID,
     CONF_ENABLED_BY_DEFAULT,
     CONF_ENCODING,
     CONF_ENTITY_PICTURE,
@@ -83,6 +85,7 @@ from .const import (
     CONF_JSON_ATTRS_TOPIC,
     CONF_MANUFACTURER,
     CONF_OBJECT_ID,
+    CONF_ORIGIN,
     CONF_PAYLOAD_AVAILABLE,
     CONF_PAYLOAD_NOT_AVAILABLE,
     CONF_QOS,
@@ -1406,12 +1409,62 @@ class MqttEntity(
         ensure_via_device_exists(self.hass, self.device_info, self._config_entry)
 
     def _init_entity_id(self) -> None:
-        """Set entity_id from object_id if defined in config."""
-        if CONF_OBJECT_ID not in self._config:
+        """Set entity_id from default_entity_id if defined in config."""
+        object_id: str
+        default_entity_id: str | None
+        # Setting the default entity_id through the CONF_OBJECT_ID is deprecated
+        # Support will be removed with HA Core 2026.4
+        if (
+            CONF_DEFAULT_ENTITY_ID not in self._config
+            and CONF_OBJECT_ID not in self._config
+        ):
             return
+        if (default_entity_id := self._config.get(CONF_DEFAULT_ENTITY_ID)) is None:
+            object_id = self._config[CONF_OBJECT_ID]
+        else:
+            _, _, object_id = default_entity_id.partition(".")
         self.entity_id = async_generate_entity_id(
-            self._entity_id_format, self._config[CONF_OBJECT_ID], None, self.hass
+            self._entity_id_format, object_id, None, self.hass
         )
+        if CONF_OBJECT_ID in self._config:
+            domain = self.entity_id.split(".")[0]
+            if not self._discovery:
+                async_create_issue(
+                    self.hass,
+                    DOMAIN,
+                    self.entity_id,
+                    issue_domain=DOMAIN,
+                    is_fixable=False,
+                    breaks_in_ha_version="2026.4",
+                    severity=IssueSeverity.WARNING,
+                    learn_more_url=f"{learn_more_url(domain)}#default_enity_id",
+                    translation_placeholders={
+                        "entity_id": self.entity_id,
+                        "object_id": self._config[CONF_OBJECT_ID],
+                        "domain": domain,
+                    },
+                    translation_key="deprecated_object_id",
+                )
+            elif CONF_DEFAULT_ENTITY_ID not in self._config:
+                if CONF_ORIGIN in self._config:
+                    origin_name = self._config[CONF_ORIGIN][CONF_NAME]
+                    url = self._config[CONF_ORIGIN].get(CONF_URL)
+                    origin = f"[{origin_name}]({url})" if url else origin_name
+                else:
+                    origin = "the integration"
+                _LOGGER.warning(
+                    "The configuration for entity %s uses the deprecated option "
+                    "`object_id` to set the default entity id. Replace the "
+                    '`"object_id": "%s"` option with `"default_entity_id": '
+                    '"%s"` in your published discovery configuration to fix this '
+                    "issue, or contact the maintainer of %s that published this config "
+                    "to fix this. This will stop working in Home Assistant Core 2026.4",
+                    self.entity_id,
+                    self._config[CONF_OBJECT_ID],
+                    f"{domain}.{self._config[CONF_OBJECT_ID]}",
+                    origin,
+                )
+
         if self.unique_id is None:
             return
         # Check for previous deleted entities

homeassistant/components/mqtt/image.py

@@ -25,6 +25,13 @@ from homeassistant.util import dt as dt_util
 
 from . import subscription
 from .config import MQTT_BASE_SCHEMA
+from .const import (
+    CONF_CONTENT_TYPE,
+    CONF_IMAGE_ENCODING,
+    CONF_IMAGE_TOPIC,
+    CONF_URL_TEMPLATE,
+    CONF_URL_TOPIC,
+)
 from .entity import MqttEntity, async_setup_entity_entry_helper
 from .models import (
     DATA_MQTT,
@@ -39,12 +46,6 @@ _LOGGER = logging.getLogger(__name__)
 
 PARALLEL_UPDATES = 0
 
-CONF_CONTENT_TYPE = "content_type"
-CONF_IMAGE_ENCODING = "image_encoding"
-CONF_IMAGE_TOPIC = "image_topic"
-CONF_URL_TEMPLATE = "url_template"
-CONF_URL_TOPIC = "url_topic"
-
 DEFAULT_NAME = "MQTT Image"
 
 GET_IMAGE_TIMEOUT = 10
@@ -67,7 +68,7 @@ PLATFORM_SCHEMA_BASE = MQTT_BASE_SCHEMA.extend(
         vol.Optional(CONF_NAME): vol.Any(cv.string, None),
         vol.Exclusive(CONF_URL_TOPIC, "image_topic"): valid_subscribe_topic,
         vol.Exclusive(CONF_IMAGE_TOPIC, "image_topic"): valid_subscribe_topic,
-        vol.Optional(CONF_IMAGE_ENCODING): "b64",
+        vol.Optional(CONF_IMAGE_ENCODING): vol.In({"b64", "raw"}),
         vol.Optional(CONF_URL_TEMPLATE): cv.template,
     }
 ).extend(MQTT_ENTITY_COMMON_SCHEMA.schema)
@@ -146,7 +147,7 @@ class MqttImage(MqttEntity, ImageEntity):
     def _image_data_received(self, msg: ReceiveMessage) -> None:
         """Handle new MQTT messages."""
         try:
-            if CONF_IMAGE_ENCODING in self._config:
+            if self._config.get(CONF_IMAGE_ENCODING) == "b64":
                 self._last_image = b64decode(msg.payload)
             else:
                 if TYPE_CHECKING:

homeassistant/components/mqtt/light/schema_json.py

@@ -91,8 +91,6 @@ from .schema_basic import (
 
 _LOGGER = logging.getLogger(__name__)
 
-DOMAIN = "mqtt_json"
-
 DEFAULT_NAME = "MQTT JSON Light"
 
 DEFAULT_FLASH = True

homeassistant/components/mqtt/manifest.json

@@ -6,6 +6,7 @@
   "config_flow": true,
   "dependencies": ["file_upload", "http"],
   "documentation": "https://www.home-assistant.io/integrations/mqtt",
+  "integration_type": "service",
   "iot_class": "local_push",
   "quality_scale": "platinum",
   "requirements": ["paho-mqtt==2.1.0"],

homeassistant/components/mqtt/schemas.py

@@ -32,6 +32,7 @@ from .const import (
     CONF_COMPONENTS,
     CONF_CONFIGURATION_URL,
     CONF_CONNECTIONS,
+    CONF_DEFAULT_ENTITY_ID,
     CONF_DEPRECATED_VIA_HUB,
     CONF_ENABLED_BY_DEFAULT,
     CONF_ENCODING,
@@ -180,6 +181,7 @@ MQTT_ENTITY_COMMON_SCHEMA = _MQTT_AVAILABILITY_SCHEMA.extend(
         vol.Optional(CONF_ICON): cv.icon,
         vol.Optional(CONF_JSON_ATTRS_TOPIC): valid_subscribe_topic,
         vol.Optional(CONF_JSON_ATTRS_TEMPLATE): cv.template,
+        vol.Optional(CONF_DEFAULT_ENTITY_ID): cv.string,
         vol.Optional(CONF_OBJECT_ID): cv.string,
         vol.Optional(CONF_UNIQUE_ID): cv.string,
     }

homeassistant/components/mqtt/strings.json

@@ -1,5 +1,9 @@
 {
   "issues": {
+    "deprecated_object_id": {
+      "title": "Deprecated option object_id used",
+      "description": "Entity {entity_id} uses the `object_id` option which is deprecated. To fix the issue, replace the `object_id: {object_id}` option with `default_entity_id: {domain}.{object_id}` in your \"configuration.yaml\", and restart Home Assistant."
+    },
     "deprecated_vacuum_battery_feature": {
       "title": "Deprecated battery feature used",
       "description": "Vacuum entity {entity_id} implements the battery feature which is deprecated. This will stop working in Home Assistant 2026.2. Implement a separate entity for the battery state instead. To fix the issue, remove the `battery` feature from the configured supported features, and restart Home Assistant."
@@ -260,6 +264,7 @@
             "fan_feature_preset_modes": "Preset modes support",
             "fan_feature_oscillation": "Oscillation support",
             "fan_feature_direction": "Direction support",
+            "image_processing_mode": "Image processing mode",
             "options": "Add option",
             "schema": "Schema",
             "state_class": "State class",
@@ -286,6 +291,7 @@
             "fan_feature_preset_modes": "The fan supports preset modes.",
             "fan_feature_oscillation": "The fan supports oscillation.",
             "fan_feature_direction": "The fan supports direction.",
+            "image_processing_mode": "Select how the image data is received.",
             "options": "Options for allowed sensor state values. The sensor’s Device class must be set to Enumeration. The 'Options' setting cannot be used together with State class or Unit of measurement.",
             "schema": "The schema to use. [Learn more.]({url}#comparison-of-light-mqtt-schemas)",
             "state_class": "The [State class](https://developers.home-assistant.io/docs/core/entity/sensor/#available-state-classes) of the sensor. [Learn more.]({url}#state_class)",
@@ -317,13 +323,16 @@
             "code_arm_required": "Code arm required",
             "code_disarm_required": "Code disarm required",
             "code_trigger_required": "Code trigger required",
+            "color_temp_template": "Color temperature template",
             "command_template": "Command template",
             "command_topic": "Command topic",
             "command_off_template": "Command \"off\" template",
             "command_on_template": "Command \"on\" template",
-            "color_temp_template": "Color temperature template",
+            "content_type": "Content type",
             "force_update": "Force update",
             "green_template": "Green template",
+            "image_encoding": "Image encoding",
+            "image_topic": "Image topic",
             "last_reset_value_template": "Last reset value template",
             "modes": "Supported operation modes",
             "mode_command_topic": "Operation mode command topic",
@@ -344,6 +353,8 @@
             "state_topic": "State topic",
             "state_value_template": "State value template",
             "supported_color_modes": "Supported color modes",
+            "url_template": "URL template",
+            "url_topic": "URL topic",
             "value_template": "Value template"
           },
           "data_description": {
@@ -354,13 +365,16 @@
             "code_arm_required": "If set, the code is required to arm the alarm. If not set, the code is not validated.",
             "code_disarm_required": "If set, the code is required to disarm the alarm. If not set, the code is not validated.",
             "code_trigger_required": "If set, the code is required to manually trigger the alarm. If not set, the code is not validated.",
+            "color_temp_template": "[Template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract color temperature in Kelvin from the state payload value. Expected result of the template is an integer.",
             "command_off_template": "The [template](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) for \"off\" state changes. Available variables are: `state` and `transition`.",
             "command_on_template": "The [template](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) for \"on\" state changes. Available variables: `state`, `brightness`, `color_temp`, `red`, `green`, `blue`, `hue`, `sat`, `flash`, `transition` and `effect`. Values `red`, `green`, `blue` and `brightness` are provided as integers from range 0-255. Value of `hue` is provided as float from range 0-360. Value of `sat` is provided as float from range 0-100. Value of `color_temp` is provided as integer representing Kelvin units.",
             "command_template": "A [template](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) to render the payload to be published at the command topic. [Learn more.]({url}#command_template)",
             "command_topic": "The publishing topic that will be used to control the {platform} entity. [Learn more.]({url}#command_topic)",
-            "color_temp_template": "[Template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract color temperature in Kelvin from the state payload value. Expected result of the template is an integer.",
+            "content_type": "The content type or the image data that is received at the image topic.",
             "force_update": "Sends update events even if the value hasn’t changed. Useful if you want to have meaningful value graphs in history. [Learn more.]({url}#force_update)",
             "green_template": "[Template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract green color from the state payload value. Expected result of the template is an integer from 0-255 range.",
+            "image_encoding": "Select the encoding of the received image data",
+            "image_topic": "The MQTT topic subscribed to receive messages containing the image data. [Learn more.]({url}#image_topic)",
             "last_reset_value_template": "Defines a [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract the last reset. When Last reset template is set, the State class option must be Total. [Learn more.]({url}#last_reset_value_template)",
             "modes": "A list of supported operation modes. [Learn more.]({url}#modes)",
             "mode_command_topic": "The MQTT topic to publish commands to change the climate operation mode. [Learn more.]({url}#mode_command_topic)",
@@ -380,6 +394,8 @@
             "state_template": "[Template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract state from the state payload value.",
             "state_topic": "The MQTT topic subscribed to receive {platform} state values. [Learn more.]({url}#state_topic)",
             "supported_color_modes": "A list of color modes supported by the light. Possible color modes are On/Off, Brightness, Color temperature, HS, XY, RGB, RGBW, RGBWW, White. Note that if On/Off or Brightness are used, that must be the only value in the list. [Learn more.]({url}#supported_color_modes)",
+            "url_template": "[Template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract an URL from the received URL topic payload value. [Learn more.]({url}#url_template)",
+            "url_topic": "The MQTT topic subscribed to receive messages containing the image URL. [Learn more.]({url}#url_topic)",
             "value_template": "Defines a [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract the {platform} entity value. [Learn more.]({url}#value_template)"
           },
           "sections": {
@@ -665,7 +681,7 @@
                 "direction_value_template": "Direction value template"
               },
               "data_description": {
-                "direction_command_topic": "The MQTT topic to publish commands to change the fan direction payload, either `forward` or `reverse`. Use the direction command template to customize the payload. [Learn more.]({url}#direction_command_topic)",
+                "direction_command_topic": "The MQTT topic to publish commands to change the fan direction. The payload will be either `forward` or `reverse` and can be customized using the direction command template. [Learn more.]({url}#direction_command_topic)",
                 "direction_command_template": "A [template](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) to compose the payload to be published at the direction command topic. The template variable `value` will be either `forward` or `reverse`.",
                 "direction_state_topic": "The MQTT topic subscribed to receive fan direction state. Accepted state payloads are `forward` or `reverse`. [Learn more.]({url}#direction_state_topic)",
                 "direction_value_template": "Defines a [template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) to extract fan direction state value. The template should return either `forward` or `reverse`. When the template returns an empty string, the direction will be ignored."
@@ -1257,6 +1273,18 @@
         "diagnostic": "Diagnostic"
       }
     },
+    "image_encoding": {
+      "options": {
+        "raw": "Raw data",
+        "b64": "Base64 encoding"
+      }
+    },
+    "image_processing_mode": {
+      "options": {
+        "image_data": "Image data is received",
+        "image_url": "Image URL is received"
+      }
+    },
     "light_schema": {
       "options": {
         "basic": "Default schema",
@@ -1279,6 +1307,7 @@
         "climate": "[%key:component::climate::title%]",
         "cover": "[%key:component::cover::title%]",
         "fan": "[%key:component::fan::title%]",
+        "image": "[%key:component::image::title%]",
         "light": "[%key:component::light::title%]",
         "lock": "[%key:component::lock::title%]",
         "notify": "[%key:component::notify::title%]",

homeassistant/components/mqtt/tag.py

@@ -53,7 +53,9 @@ DISCOVERY_SCHEMA = MQTT_BASE_SCHEMA.extend(
 )
 
 
-async def async_setup_entry(hass: HomeAssistant, config_entry: ConfigEntry) -> None:
+async def async_setup_mqtt_tag_entry(
+    hass: HomeAssistant, config_entry: ConfigEntry
+) -> None:
     """Set up MQTT tag scanner dynamically through MQTT discovery."""
 
     setup = functools.partial(_async_setup_tag, hass, config_entry=config_entry)

homeassistant/components/mqtt/translations/cs.json

@@ -237,6 +237,7 @@
                         "fan_feature_oscillation": "Podpora kmit\u00e1n\u00ed",
                         "fan_feature_preset_modes": "Podpora p\u0159edvoleb",
                         "fan_feature_speed": "Podpora rychlosti",
+                        "image_processing_mode": "Re\u017eim zpracov\u00e1n\u00ed obrazu",
                         "options": "P\u0159idat volbu",
                         "schema": "Sch\u00e9ma",
                         "state_class": "T\u0159\u00edda stavu",
@@ -263,6 +264,7 @@
                         "fan_feature_oscillation": "Ventil\u00e1tor podporuje kmit\u00e1n\u00ed.",
                         "fan_feature_preset_modes": "Ventil\u00e1tor podporuje p\u0159edvolby.",
                         "fan_feature_speed": "Ventil\u00e1tor podporuje v\u00edce rychlost\u00ed.",
+                        "image_processing_mode": "Vyberte, jak budou obrazov\u00e1 data p\u0159ij\u00edm\u00e1na.",
                         "options": "Volby pro povolen\u00e9 hodnoty stavu senzoru. T\u0159\u00edda za\u0159\u00edzen\u00ed senzoru mus\u00ed b\u00fdt nastavena na V\u00fd\u010det. Nastaven\u00ed \"Volby\" nelze pou\u017e\u00edt spole\u010dn\u011b s t\u0159\u00eddou stavu nebo m\u011brnou jednotkou.",
                         "schema": "Sch\u00e9ma, kter\u00e9 se m\u00e1 pou\u017e\u00edt. [V\u00edce informac\u00ed]({url}#comparison-of-light-mqtt-schemas)",
                         "state_class": "[T\u0159\u00edda stavu](https://developers.home-assistant.io/docs/core/entity/sensor/#available-state-classes) senzoru. [Dal\u0161\u00ed informace.]({url}#state_class)",
@@ -329,8 +331,11 @@
                         "command_on_template": "\u0160ablona p\u0159\u00edkazu \"zapnuto\"",
                         "command_template": "\u0160ablona p\u0159\u00edkazu",
                         "command_topic": "T\u00e9ma p\u0159\u00edkazu",
+                        "content_type": "Typ obsahu",
                         "force_update": "Vynutit aktualizaci",
                         "green_template": "Zelen\u00e1 \u0161ablona",
+                        "image_encoding": "K\u00f3dov\u00e1n\u00ed obrazu",
+                        "image_topic": "T\u00e9ma obr\u00e1zku",
                         "last_reset_value_template": "\u0160ablona posledn\u00ed resetovan\u00e9 hodnoty",
                         "mode_command_template": "\u0160ablona p\u0159\u00edkazu provozn\u00edho re\u017eimu",
                         "mode_command_topic": "T\u00e9ma p\u0159\u00edkazu provozn\u00edho re\u017eimu",
@@ -351,6 +356,8 @@
                         "state_topic": "T\u00e9ma stavu",
                         "state_value_template": "\u0160ablona hodnoty stavu",
                         "supported_color_modes": "Podporovan\u00e9 barevn\u00e9 re\u017eimy",
+                        "url_template": "URL adresa \u0161ablony",
+                        "url_topic": "URL adresa t\u00e9ma",
                         "value_template": "\u0160ablona hodnoty"
                     },
                     "data_description": {
@@ -366,8 +373,11 @@
                         "command_on_template": "[\u0160ablona](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) pro zm\u011bny stavu \"zapnuto\". Dostupn\u00e9 prom\u011bnn\u00e9: \"state\", \"brightness\", \"color_temp\", \"red\", \"green\", \"blue\", \"hue\", \"sat\", \"flash\", \"transition\" a \"effect\". Hodnoty \"red\", \"green\", \"blue\" a \"brightness\" jsou zad\u00e1ny jako cel\u00e1 \u010d\u00edsla v rozsahu 0-255. Hodnota \"hue\" je zad\u00e1na jako desetinn\u00e9 \u010d\u00edslo v rozsahu 0-360. Hodnota \"sat\" je zad\u00e1na jako desetinn\u00e9 \u010d\u00edslo v rozsahu 0-100. Hodnota \"color_temp\" je zad\u00e1na jako cel\u00e9 \u010d\u00edslo p\u0159edstavuj\u00edc\u00ed jednotky Kelvina.",
                         "command_template": "[\u0160ablona](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) pro vykreslen\u00ed u\u017eite\u010dn\u00e9ho obsahu, kter\u00fd m\u00e1 b\u00fdt publikov\u00e1n v t\u00e9matu p\u0159\u00edkazu. [V\u00edce informac\u00ed]({url}#command_template)",
                         "command_topic": "Publika\u010dn\u00ed t\u00e9ma, kter\u00e9 bude pou\u017eito k ovl\u00e1d\u00e1n\u00ed entity {platform}. [Dal\u0161\u00ed informace.]({url}#command_topic)",
+                        "content_type": "Typ obsahu nebo obrazov\u00e1 data p\u0159ijat\u00e1 v t\u00e9matu obr\u00e1zku.",
                         "force_update": "Odes\u00edl\u00e1 aktualiza\u010dn\u00ed ud\u00e1losti, i kdy\u017e se hodnota nezm\u011bnila. U\u017eite\u010dn\u00e9, pokud chcete m\u00edt v historii smyslupln\u00e9 grafy hodnot. [Dal\u0161\u00ed informace.]({url}#force_update)",
                         "green_template": "[\u0160ablona](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) pro extrakci zelen\u00e9 barvy z hodnoty datov\u00e9 \u010d\u00e1sti stavu. O\u010dek\u00e1van\u00fdm v\u00fdsledkem \u0161ablony je cel\u00e9 \u010d\u00edslo v rozsahu 0-255.",
+                        "image_encoding": "Vyberte k\u00f3dov\u00e1n\u00ed p\u0159ijat\u00fdch obrazov\u00fdch dat",
+                        "image_topic": "T\u00e9ma MQTT se p\u0159ihl\u00e1silo k odb\u011bru zpr\u00e1v obsahuj\u00edc\u00edch obrazov\u00e1 data. [V\u00edce informac\u00ed]({url}#image_topic)",
                         "last_reset_value_template": "Definuje [\u0161ablonu](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) pro extrahov\u00e1n\u00ed posledn\u00edho resetu. Kdy\u017e je nastavena \u0160ablona posledn\u00edho resetov\u00e1n\u00ed, mus\u00ed b\u00fdt mo\u017enost T\u0159\u00edda stavu nastavena na Celkem. [Dal\u0161\u00ed informace.]({url}#last_reset_value_template)",
                         "mode_command_template": "[\u0160ablona](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) pro definov\u00e1n\u00ed opera\u010dn\u00edho re\u017eimu, kter\u00fd se m\u00e1 odeslat do t\u00e9matu p\u0159\u00edkazu opera\u010dn\u00edho re\u017eimu. [V\u00edce informac\u00ed]({url}#mode_command_template)",
                         "mode_command_topic": "T\u00e9ma MQTT pro publikov\u00e1n\u00ed p\u0159\u00edkaz\u016f pro zm\u011bnu re\u017eimu provozu klimatizace. [V\u00edce informac\u00ed]({url}#mode_command_topic)",
@@ -387,6 +397,8 @@
                         "state_template": "[\u0160ablona](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) pro extrakci stavu z hodnoty datov\u00e9 \u010d\u00e1sti stavu.",
                         "state_topic": "T\u00e9ma MQTT se p\u0159ihl\u00e1silo k odb\u011bru hodnot stavu {platform}. [Dal\u0161\u00ed informace.]({url}#state_topic)",
                         "supported_color_modes": "Seznam barevn\u00fdch re\u017eim\u016f podporovan\u00fdch seznamem. Mo\u017en\u00e9 barevn\u00e9 re\u017eimy jsou Zapnuto/Vypnuto, Jas, Teplota barev, HS, XY, RGB, RGBW, RGBWW, B\u00cdL\u00c1. Pokud se pou\u017eije zapnuto/vypnuto nebo jas, mus\u00ed to b\u00fdt jedin\u00e1 hodnota v seznamu. [V\u00edce informac\u00ed]({url}#supported_color_modes)",
+                        "url_template": "[\u0160ablona](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) pro extrahov\u00e1n\u00ed URL z p\u0159ijat\u00e9 hodnoty datov\u00e9ho obsahu t\u00e9matu URL. [V\u00edce informac\u00ed]({url}#url_template)",
+                        "url_topic": "T\u00e9ma MQTT se p\u0159ihl\u00e1silo k odb\u011bru zpr\u00e1v obsahuj\u00edc\u00edch URL adresu obr\u00e1zku. [V\u00edce informac\u00ed]({url}#url_topic)",
                         "value_template": "Definuje [\u0161ablonu](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) pro extrakci hodnoty entity {platform}. [V\u00edce informac\u00ed]({url}#value_template)"
                     },
                     "description": "Nastavte konkr\u00e9tn\u00ed podrobnosti MQTT pro {platform} entitu \"{entity}\":",
@@ -1013,6 +1025,10 @@
         }
     },
     "issues": {
+        "deprecated_object_id": {
+            "description": "Entita {entity_id} pou\u017e\u00edv\u00e1 zastaralou volbu \"object_id\". Chcete-li probl\u00e9m vy\u0159e\u0161it, nahra\u010fte v souboru \"configuration.yaml\" volbu \"object_id: {object_id}\" volbou \"efault_entity_id: {domain}.{object_id}\" a restartujte Home Assistanta.",
+            "title": "Pou\u017eit\u00e1 zastaral\u00e1 volba \"object_id\""
+        },
         "deprecated_vacuum_battery_feature": {
             "description": "Entita vysava\u010de {entity_id} implementuje funkci baterie, kter\u00e1 je zastaral\u00e1. Tato funkce p\u0159estane fungovat v Home Assistantovi verze 2026.2. Implementujte m\u00edsto toho samostatnou entitu pro stav baterie. Chcete-li probl\u00e9m vy\u0159e\u0161it, odeberte funkci \"battery\" z nastaven\u00fdch podporovan\u00fdch funkc\u00ed a restartujte Home Assistanta.",
             "title": "Pou\u017e\u00edv\u00e1 se zastaral\u00e1 funkce \"battery\""
@@ -1289,6 +1305,18 @@
                 "diagnostic": "Diagnostika"
             }
         },
+        "image_encoding": {
+            "options": {
+                "b64": "K\u00f3dov\u00e1n\u00ed Base64",
+                "raw": "Nezpracovan\u00e1 data"
+            }
+        },
+        "image_processing_mode": {
+            "options": {
+                "image_data": "P\u0159ij\u00edmaj\u00ed se obrazov\u00e1 data",
+                "image_url": "P\u0159ij\u00edm\u00e1 se adresa URL obr\u00e1zku"
+            }
+        },
         "light_schema": {
             "options": {
                 "basic": "V\u00fdchoz\u00ed sch\u00e9ma",
@@ -1311,6 +1339,7 @@
                 "climate": "Klima",
                 "cover": "Roleta",
                 "fan": "Ventil\u00e1tor",
+                "image": "Obr\u00e1zek",
                 "light": "Sv\u011btlo",
                 "lock": "Z\u00e1mek",
                 "notify": "Ozn\u00e1men\u00ed",

homeassistant/components/mqtt/translations/de.json

@@ -237,6 +237,7 @@
                         "fan_feature_oscillation": "Unterst\u00fctzung der Oszillation",
                         "fan_feature_preset_modes": "Unterst\u00fctzung von Voreinstellungen",
                         "fan_feature_speed": "Drehzahl-Unterst\u00fctzung",
+                        "image_processing_mode": "Bildverarbeitungsmodus",
                         "options": "Option hinzuf\u00fcgen",
                         "schema": "Schema",
                         "state_class": "Zustandsklasse",
@@ -263,6 +264,7 @@
                         "fan_feature_oscillation": "Der Ventilator unterst\u00fctzt die Oszillation.",
                         "fan_feature_preset_modes": "Der Ventilator unterst\u00fctzt voreingestellte Betriebsarten.",
                         "fan_feature_speed": "Der Ventilator unterst\u00fctzt mehrere Drehzahlen.",
+                        "image_processing_mode": "W\u00e4hle aus, wie die Bilddaten empfangen werden.",
                         "options": "Optionen f\u00fcr zul\u00e4ssige Werte des Sensorzustands. Die Ger\u00e4teklasse des Sensors muss auf \u201eEnumeration\u201c eingestellt sein. Die Einstellung \u201eOptionen\u201c kann nicht zusammen mit \u201eZustandsklasse\u201c oder \u201eMa\u00dfeinheit\u201c verwendet werden.",
                         "schema": "Das zu verwendende Schema. [Weitere Informationen]({url}#comparison-of-light-mqtt-schemas)",
                         "state_class": "Die [Zustandsklasse](https://developers.home-assistant.io/docs/core/entity/sensor/#available-state-classes) des Sensors. [Weitere Informationen]({url}#state_class)",
@@ -329,8 +331,11 @@
                         "command_on_template": "Befehlstemplate \u201eEin\u201c",
                         "command_template": "Befehls-Template",
                         "command_topic": "Befehls-Topic",
+                        "content_type": "Inhaltstyp",
                         "force_update": "Aktualisierung erzwingen",
                         "green_template": "Gr\u00fcn-Template",
+                        "image_encoding": "Bildkodierung",
+                        "image_topic": "Bild-Topic",
                         "last_reset_value_template": "Template des letzten R\u00fccksetzwertes",
                         "mode_command_template": "Template f\u00fcr Betriebsart-Befehl",
                         "mode_command_topic": "Topic f\u00fcr Betriebsart-Befehl",
@@ -351,6 +356,8 @@
                         "state_topic": "Zustands-Topic",
                         "state_value_template": "Zustandswert-Template",
                         "supported_color_modes": "Unterst\u00fctzte Farbmodi",
+                        "url_template": "URL-Template",
+                        "url_topic": "URL-Topic",
                         "value_template": "Wert-Template"
                     },
                     "data_description": {
@@ -366,8 +373,11 @@
                         "command_on_template": "Das [Template](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) f\u00fcr Zustands\u00e4nderungen zu \u201eEin\u201c. Verf\u00fcgbare Variablen: `state`, `brightness`, `color_temp`, `red`, `green`, `blue`, `hue`, `sat`, `flash`, `transition` und `effect`. Die Werte `red`, `green`, `blue` und `brightness` werden als Ganzzahlen im Bereich 0-255 angegeben. Der Wert von `hue` wird als Flie\u00dfkommazahl im Bereich von 0-360 angegeben. Der Wert von `sat` wird als Flie\u00dfkommazahl im Bereich 0-100 angegeben. Der Wert von `color_temp` wird als Ganzzahl in Kelvin-Einheiten angegeben.",
                         "command_template": "Ein [Template](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) zum Rendern der Payload, die im Befehls-Topic ver\u00f6ffentlicht werden soll. [Weitere Informationen]({url}#command_template)",
                         "command_topic": "Das Ver\u00f6ffentlichungs-Topic, das zur Steuerung der {platform}-Entit\u00e4t verwendet wird. [Weitere Informationen]({url}#command_topic)",
+                        "content_type": "Der Inhaltstyp oder die Bilddaten, die im Bild-Topic empfangen werden.",
                         "force_update": "Sendet Aktualisierungsereignisse, auch wenn sich der Wert nicht ge\u00e4ndert hat. N\u00fctzlich, wenn du aussagekr\u00e4ftige Wertediagramme im Verlauf haben m\u00f6chtest. [Weitere Informationen]({url}#force_update)",
                         "green_template": "[Template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) zum Extrahieren der gr\u00fcnen Farbe aus dem Payloadwert f\u00fcr den Zustand. Das erwartete Ergebnis des Templates ist eine Ganzzahl im Bereich von 0 bis 255.",
+                        "image_encoding": "W\u00e4hle die Kodierung der empfangenen Bilddaten",
+                        "image_topic": "Das abonnierte MQTT-Topic zum Empfang der Nachrichten mit den enthaltenen Bilddaten. [Weitere Informationen]({url}#image_topic)",
                         "last_reset_value_template": "Definiert ein [Template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) zum Extrahieren der letzten R\u00fcckstellung. Wenn \u201eLast reset template\u201c gesetzt ist, muss die Zustandsklasse-Option \u201eGesamt\u201c sein. [Weitere Informationen]({url}#last_reset_value_template)",
                         "mode_command_template": "[Template](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) zur Definition der Betriebsart, die an das Topic f\u00fcr den Betriebsart-Befehl gesendet werden soll. [Weitere Informationen]({url}#mode_command_template)",
                         "mode_command_topic": "Das MQTT-Topic zum Ver\u00f6ffentlichen von Befehlen zum \u00c4ndern der Betriebsart des Klimager\u00e4ts. [Weitere Informationen]({url}#mode_command_topic)",
@@ -387,6 +397,8 @@
                         "state_template": "[Template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) zum Extrahieren des Zustands aus dem Payloadwert f\u00fcr den Zustand.",
                         "state_topic": "Das MQTT-Topic, das abonniert ist, um \u201e{platform}\u201c-Zustandswerte zu empfangen. [Weitere Informationen]({url}#state_topic)",
                         "supported_color_modes": "Eine Liste der von der Leuchte unterst\u00fctzten Farbmodi. M\u00f6gliche Farbmodi sind Ein/Aus, Helligkeit, Farbtemperatur, HS, XY, RGB, RGBW, RGBWW und Wei\u00df. Beachte, dass bei Verwendung von Ein/Aus oder Helligkeit dies der einzige Wert in der Liste sein muss. [Weitere Informationen]({url}#supported_color_modes)",
+                        "url_template": "[Template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) zum Extrahieren einer URL aus dem empfangenen Payloadwert f\u00fcr das URL-Topic. [Weitere Informationen]({url}#url_template)",
+                        "url_topic": "Das abonnierte MQTT-Topic zum Empfang der Nachrichten mit der enthaltenen Bild-URL. [Weitere Informationen]({url}#url_topic)",
                         "value_template": "Definiert ein [Template](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) zum Extrahieren des \u201e{platform}\u201c-Entit\u00e4tswerts. [Weitere Informationen]({url}#value_template)"
                     },
                     "description": "Bitte konfiguriere MQTT-spezifische Details f\u00fcr die {platform}-Entit\u00e4t \u201e{entity}\u201c:",
@@ -1013,6 +1025,10 @@
         }
     },
     "issues": {
+        "deprecated_object_id": {
+            "description": "Die Entit\u00e4t {entity_id} verwendet die veraltete Option `object_id`. Um das Problem zu beheben, ersetze in deiner \u201econfiguration.yaml\u201c-Datei die Option `object_id: {object_id}` durch `default_entity_id: {domain}.{object_id}` und starte Home Assistant neu.",
+            "title": "Veraltete Option object_id verwendet"
+        },
         "deprecated_vacuum_battery_feature": {
             "description": "Die Staubsauger-Entit\u00e4t {entity_id} implementiert die veraltete Batteriefunktion. Diese wird in Home Assistant 2026.2 nicht mehr funktionieren. Implementiere stattdessen eine separate Entit\u00e4t f\u00fcr den Batteriezustand. Um das Problem zu beheben, entferne die `battery`-Funktion aus den konfigurierten unterst\u00fctzten Funktionen und starte Home Assistant neu.",
             "title": "Veraltete Batteriefunktion verwendet"
@@ -1289,6 +1305,18 @@
                 "diagnostic": "Diagnose"
             }
         },
+        "image_encoding": {
+            "options": {
+                "b64": "Base64-Kodierung",
+                "raw": "Rohdaten"
+            }
+        },
+        "image_processing_mode": {
+            "options": {
+                "image_data": "Bilddaten werden empfangen",
+                "image_url": "Bild-URL wird empfangen"
+            }
+        },
         "light_schema": {
             "options": {
                 "basic": "Standardschema",
@@ -1311,6 +1339,7 @@
                 "climate": "Klima",
                 "cover": "Abdeckung",
                 "fan": "Ventilator",
+                "image": "Bild",
                 "light": "Leuchte",
                 "lock": "Schloss",
                 "notify": "Benachrichtigungen",

homeassistant/components/mqtt/translations/el.json

@@ -487,6 +487,10 @@
         }
     },
     "issues": {
+        "deprecated_object_id": {
+            "description": "\u0397 \u03bf\u03bd\u03c4\u03cc\u03c4\u03b7\u03c4\u03b1 {entity_id} \u03c7\u03c1\u03b7\u03c3\u03b9\u03bc\u03bf\u03c0\u03bf\u03b9\u03b5\u03af \u03c4\u03b7\u03bd \u03b5\u03c0\u03b9\u03bb\u03bf\u03b3\u03ae `object_id`, \u03b7 \u03bf\u03c0\u03bf\u03af\u03b1 \u03ad\u03c7\u03b5\u03b9 \u03ba\u03b1\u03c4\u03b1\u03c1\u03b3\u03b7\u03b8\u03b5\u03af. \u0393\u03b9\u03b1 \u03bd\u03b1 \u03b4\u03b9\u03bf\u03c1\u03b8\u03ce\u03c3\u03b5\u03c4\u03b5 \u03c4\u03bf \u03c0\u03c1\u03cc\u03b2\u03bb\u03b7\u03bc\u03b1, \u03b1\u03bd\u03c4\u03b9\u03ba\u03b1\u03c4\u03b1\u03c3\u03c4\u03ae\u03c3\u03c4\u03b5 \u03c4\u03b7\u03bd \u03b5\u03c0\u03b9\u03bb\u03bf\u03b3\u03ae `object_id: {object_id}` \u03bc\u03b5 \u03c4\u03b7\u03bd \u03b5\u03c0\u03b9\u03bb\u03bf\u03b3\u03ae `default_entity_id: {domain}.{object_id}` \u03c3\u03c4\u03bf \u03b1\u03c1\u03c7\u03b5\u03af\u03bf \"configuration.yaml\" \u03ba\u03b1\u03b9 \u03ba\u03ac\u03bd\u03c4\u03b5 \u03b5\u03c0\u03b1\u03bd\u03b5\u03ba\u03ba\u03af\u03bd\u03b7\u03c3\u03b7 \u03c4\u03bf\u03c5 Home Assistant.",
+            "title": "\u03a7\u03c1\u03b7\u03c3\u03b9\u03bc\u03bf\u03c0\u03bf\u03b9\u03b5\u03af\u03c4\u03b1\u03b9 \u03b7 \u03ba\u03b1\u03c4\u03b1\u03c1\u03b3\u03b7\u03bc\u03ad\u03bd\u03b7 \u03b5\u03c0\u03b9\u03bb\u03bf\u03b3\u03ae object_id"
+        },
         "deprecated_vacuum_battery_feature": {
             "description": "\u0397 \u03bf\u03bd\u03c4\u03cc\u03c4\u03b7\u03c4\u03b1 \u03c3\u03ba\u03bf\u03cd\u03c0\u03b1\u03c2 {entity_id} \u03c5\u03bb\u03bf\u03c0\u03bf\u03b9\u03b5\u03af \u03c4\u03b7 \u03bb\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b1 \u03bc\u03c0\u03b1\u03c4\u03b1\u03c1\u03af\u03b1\u03c2, \u03b7 \u03bf\u03c0\u03bf\u03af\u03b1 \u03ad\u03c7\u03b5\u03b9 \u03ba\u03b1\u03c4\u03b1\u03c1\u03b3\u03b7\u03b8\u03b5\u03af. \u0391\u03c5\u03c4\u03cc \u03b8\u03b1 \u03c3\u03c4\u03b1\u03bc\u03b1\u03c4\u03ae\u03c3\u03b5\u03b9 \u03bd\u03b1 \u03bb\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03b5\u03af \u03c3\u03c4\u03bf Home Assistant 2026.2. \u03a5\u03bb\u03bf\u03c0\u03bf\u03b9\u03ae\u03c3\u03c4\u03b5 \u03b1\u03bd\u03c4' \u03b1\u03c5\u03c4\u03bf\u03cd \u03bc\u03b9\u03b1 \u03be\u03b5\u03c7\u03c9\u03c1\u03b9\u03c3\u03c4\u03ae \u03bf\u03bd\u03c4\u03cc\u03c4\u03b7\u03c4\u03b1 \u03b3\u03b9\u03b1 \u03c4\u03b7\u03bd \u03ba\u03b1\u03c4\u03ac\u03c3\u03c4\u03b1\u03c3\u03b7 \u03c4\u03b7\u03c2 \u03bc\u03c0\u03b1\u03c4\u03b1\u03c1\u03af\u03b1\u03c2. \u0393\u03b9\u03b1 \u03bd\u03b1 \u03b4\u03b9\u03bf\u03c1\u03b8\u03ce\u03c3\u03b5\u03c4\u03b5 \u03c4\u03bf \u03c0\u03c1\u03cc\u03b2\u03bb\u03b7\u03bc\u03b1, \u03b1\u03c6\u03b1\u03b9\u03c1\u03ad\u03c3\u03c4\u03b5 \u03c4\u03bf \u03c7\u03b1\u03c1\u03b1\u03ba\u03c4\u03b7\u03c1\u03b9\u03c3\u03c4\u03b9\u03ba\u03cc `battery` \u03b1\u03c0\u03cc \u03c4\u03b1 \u03b4\u03b9\u03b1\u03bc\u03bf\u03c1\u03c6\u03c9\u03bc\u03ad\u03bd\u03b1 \u03c5\u03c0\u03bf\u03c3\u03c4\u03b7\u03c1\u03b9\u03b6\u03cc\u03bc\u03b5\u03bd\u03b1 \u03c7\u03b1\u03c1\u03b1\u03ba\u03c4\u03b7\u03c1\u03b9\u03c3\u03c4\u03b9\u03ba\u03ac \u03ba\u03b1\u03b9 \u03ba\u03ac\u03bd\u03c4\u03b5 \u03b5\u03c0\u03b1\u03bd\u03b5\u03ba\u03ba\u03af\u03bd\u03b7\u03c3\u03b7 \u03c4\u03bf\u03c5 Home Assistant.",
             "title": "\u03a7\u03c1\u03b7\u03c3\u03b9\u03bc\u03bf\u03c0\u03bf\u03b9\u03b5\u03af\u03c4\u03b1\u03b9 \u03ba\u03b1\u03c4\u03b1\u03c1\u03b3\u03b7\u03bc\u03ad\u03bd\u03b7 \u03bb\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b1 \u03c4\u03b7\u03c2 \u03bc\u03c0\u03b1\u03c4\u03b1\u03c1\u03af\u03b1\u03c2"