homeassistant 2025.8.0b5__py3-none-any.whl → 2025.8.2__py3-none-any.whl

homeassistant/components/miele/translations/it.json

@@ -238,8 +238,8 @@
                     "plate_step_7": "4",
                     "plate_step_8": "4\u2022",
                     "plate_step_9": "5",
-                    "plate_step_boost": "Boost",
-                    "plate_step_warm": "Tenere in caldo"
+                    "plate_step_boost": "Potenziamento",
+                    "plate_step_warm": "Mantenimento in caldo"
                 }
             },
             "program_id": {
@@ -385,6 +385,8 @@
                     "codfish_piece": "Merluzzo bianco, trancio",
                     "coffee": "Caff\u00e8",
                     "coffee_pot": "Caffettiera",
+                    "comfort_wash": "Lavaggio comfort",
+                    "comfort_wash_plus": "Lavaggio comfort plus",
                     "common_beans": "Fagiolini finissimi",
                     "common_sole_fillet_1_cm": "Sogliola, filetto (1cm)",
                     "common_sole_fillet_2_cm": "Sogliola, filetto (2cm)",
@@ -731,7 +733,7 @@
                     "rice_pudding_steam_cooking": "Riso al latte (cottura a vapore)",
                     "rinse": "Solo risciacquo",
                     "rinse_out_lint": "Autopulizia cesto",
-                    "rinse_salt": "Risciacquo sale",
+                    "rinse_salt": "Sale per risciacquo",
                     "risotto": "Risotto",
                     "ristretto": "Ristretto",
                     "roast_beef_low_temperature_cooking": "Roast beef (cottura a bassa temperatura)",
@@ -1004,8 +1006,8 @@
                     "idle": "Inattivo",
                     "in_use": "In funzione",
                     "not_connected": "Non connesso",
-                    "off": "Off",
-                    "on": "On",
+                    "off": "Spento",
+                    "on": "Acceso",
                     "pause": "Pausa",
                     "program_ended": "Fine",
                     "program_interrupted": "Programma interrotto",

homeassistant/components/miele/translations/lt.json

@@ -219,12 +219,27 @@
             "plate": {
                 "name": "Plok\u0161t\u0117 {plate_no}",
                 "state": {
+                    "plate_step_0": "0",
+                    "plate_step_1": "1",
+                    "plate_step_10": "5\u2022",
+                    "plate_step_11": "6",
+                    "plate_step_12": "6\u2022",
+                    "plate_step_13": "7",
+                    "plate_step_14": "7\u2022",
+                    "plate_step_15": "8",
+                    "plate_step_16": "8\u2022",
+                    "plate_step_17": "9",
+                    "plate_step_18": "9\u2022",
+                    "plate_step_2": "1\u2022",
+                    "plate_step_3": "2",
+                    "plate_step_4": "2\u2022",
                     "plate_step_5": "3",
                     "plate_step_6": "3\u2022",
                     "plate_step_7": "4",
                     "plate_step_8": "4\u2022",
                     "plate_step_9": "5",
                     "plate_step_boost": "Padidinti",
+                    "plate_step_boost_2": "Boost 2",
                     "plate_step_warm": "\u0160ildymas"
                 }
             },
@@ -1045,8 +1060,44 @@
         "config_entry_not_ready": {
             "message": "\u012ekeliant integracij\u0105 \u012fvyko klaida."
         },
+        "get_programs_error": {
+            "message": "'Gauti programas' veiksmas nepavyko: {status} / {message}"
+        },
+        "invalid_target": {
+            "message": "Neteisingas tikslinis \u012frenginys."
+        },
+        "set_program_error": {
+            "message": "Veiksmas 'Nustatyti program\u0105' nepavyko: {status} / {message}"
+        },
+        "set_program_oven_error": {
+            "message": "Veiksmas 'Nustatyti program\u0105 orkait\u0117je' nepavyko: {status} / {message}"
+        },
         "set_state_error": {
             "message": "Nepavyko nustatyti b\u016bsenos {entity}."
         }
+    },
+    "services": {
+        "get_programs": {
+            "description": "Gr\u0105\u017eina galim\u0173 program\u0173 s\u0105ra\u0161\u0105.",
+            "name": "Gaukite programas"
+        },
+        "set_program": {
+            "description": "Nustato ir paleid\u017eia prietaiso program\u0105.",
+            "name": "Nustatyti program\u0105"
+        },
+        "set_program_oven": {
+            "description": "Nustato ir paleid\u017eia prietaiso program\u0105.",
+            "fields": {
+                "duration": {
+                    "description": "Orkait\u0117s programos trukm\u0117.",
+                    "name": "Trukm\u0117"
+                },
+                "temperature": {
+                    "description": "Orkait\u0117s programos tikslin\u0117 temperat\u016bra.",
+                    "name": "Temperat\u016bra"
+                }
+            },
+            "name": "Nustatykite program\u0105 orkait\u0117je"
+        }
     }
 }

homeassistant/components/miele/translations/nl.json

@@ -128,6 +128,7 @@
             },
             "plate": {
                 "state": {
+                    "plate_step_0": "0",
                     "plate_step_1": "1",
                     "plate_step_10": "5\u2022",
                     "plate_step_11": "6",

homeassistant/components/miele/translations/pt.json

@@ -217,7 +217,30 @@
                 "name": "Previs\u00e3o de energia"
             },
             "plate": {
-                "name": "Prato {plate_no}"
+                "name": "Prato {plate_no}",
+                "state": {
+                    "plate_step_0": "0",
+                    "plate_step_1": "1",
+                    "plate_step_10": "5\u2022",
+                    "plate_step_11": "6",
+                    "plate_step_12": "6\u2022",
+                    "plate_step_13": "7",
+                    "plate_step_14": "7\u2022",
+                    "plate_step_15": "8",
+                    "plate_step_16": "8\u2022",
+                    "plate_step_17": "9",
+                    "plate_step_18": "9*",
+                    "plate_step_2": "1*",
+                    "plate_step_3": "2",
+                    "plate_step_4": "2*",
+                    "plate_step_5": "3",
+                    "plate_step_6": "3*",
+                    "plate_step_7": "4",
+                    "plate_step_8": "4*",
+                    "plate_step_9": "5",
+                    "plate_step_boost": "Turbo",
+                    "plate_step_warm": "A aquecer"
+                }
             },
             "program_id": {
                 "name": "Programa",
@@ -348,6 +371,8 @@
                     "chicken_tikka_masala_with_rice": "Frango Tikka Masala com arroz",
                     "chicken_whole": "Galinha",
                     "chinese_cabbage_cut": "Couve chinesa (cortada)",
+                    "chocolate_hazlenut_cake_one_large": "Bolo de chocolate com avel\u00e3s (um grande)",
+                    "chocolate_hazlenut_cake_several_small": "Bolo de chocolate com avel\u00e3s (v\u00e1rios pequenos)",
                     "chongming_rapid_steam_cooking": "Chongming (cozedura r\u00e1pida a vapor)",
                     "chongming_steam_cooking": "Chongming (cozedura a vapor)",
                     "choux_buns": "P\u00e3ezinhos de choux",
@@ -362,6 +387,8 @@
                     "codfish_piece": "Bacalhau (pe\u00e7a)",
                     "coffee": "Caf\u00e9",
                     "coffee_pot": "Cafeteira",
+                    "comfort_wash": "Lavagem de conforto",
+                    "comfort_wash_plus": "Lavagem de conforto plus",
                     "common_beans": "Feij\u00e3o-comum",
                     "common_sole_fillet_1_cm": "Linguado leg\u00edtimo (filete, 1 cm)",
                     "common_sole_fillet_2_cm": "Linguado leg\u00edtimo (filete, 2 cm)",
@@ -580,6 +607,7 @@
                     "parsnip_cut_into_batons": "Pastinaga (cortada em palitos)",
                     "parsnip_diced": "Pastinaca (cortada em cubos)",
                     "parsnip_sliced": "Pastinaca (cortada)",
+                    "pasta_paela": "Massa/Paella",
                     "pears_halved": "Peras (cortadas ao meio)",
                     "pears_quartered": "Peras para cozer (grandes, inteiras)",
                     "pears_to_cook_large_halved": "Peras para cozer (grandes, cortadas ao meio)",
@@ -708,6 +736,7 @@
                     "rice_pudding_steam_cooking": "Arroz-doce (cozedura a vapor)",
                     "rinse": "Enxaguar",
                     "rinse_out_lint": "Eliminar o cot\u00e3o",
+                    "rinse_salt": "Sal de enxaguamento",
                     "risotto": "Risoto",
                     "ristretto": "Ristretto",
                     "roast_beef_low_temperature_cooking": "Rosbife (cozedura a baixa temperatura)",
@@ -1033,8 +1062,68 @@
         "config_entry_not_ready": {
             "message": "Erro ao carregar a integra\u00e7\u00e3o."
         },
+        "get_programs_error": {
+            "message": "A a\u00e7\u00e3o 'Obter programas' falhou: {status} / {message}"
+        },
+        "invalid_target": {
+            "message": "Dispositivo inv\u00e1lido visado."
+        },
+        "set_program_error": {
+            "message": "A a\u00e7\u00e3o 'Definir programa' falhou: {status} / {message}"
+        },
+        "set_program_oven_error": {
+            "message": "A a\u00e7\u00e3o 'Definir programa no forno' falhou: {status} / {message}"
+        },
         "set_state_error": {
             "message": "Erro ao definir o estado de {entity}."
         }
+    },
+    "services": {
+        "get_programs": {
+            "description": "Devolve uma lista de programas dispon\u00edveis.",
+            "fields": {
+                "device_id": {
+                    "description": "O dispositivo de destino para esta a\u00e7\u00e3o.",
+                    "name": "Dispositivo"
+                }
+            },
+            "name": "Obter programas"
+        },
+        "set_program": {
+            "description": "Define e inicia um programa no aparelho.",
+            "fields": {
+                "device_id": {
+                    "description": "O dispositivo de destino para esta a\u00e7\u00e3o.",
+                    "name": "Dispositivo"
+                },
+                "program_id": {
+                    "description": "O ID do programa a definir.",
+                    "name": "ID do programa"
+                }
+            },
+            "name": "Definir programa"
+        },
+        "set_program_oven": {
+            "description": "Define e inicia um programa no aparelho.",
+            "fields": {
+                "device_id": {
+                    "description": "O dispositivo de destino para esta a\u00e7\u00e3o.",
+                    "name": "Dispositivo"
+                },
+                "duration": {
+                    "description": "A dura\u00e7\u00e3o do programa do forno.",
+                    "name": "Dura\u00e7\u00e3o"
+                },
+                "program_id": {
+                    "description": "O ID do programa a definir.",
+                    "name": "ID do programa"
+                },
+                "temperature": {
+                    "description": "A temperatura alvo para o programa do forno.",
+                    "name": "Temperatura"
+                }
+            },
+            "name": "Definir programa no forno"
+        }
     }
 }

homeassistant/components/miele/translations/sk.json

@@ -239,6 +239,7 @@
                     "plate_step_8": "4\u2022",
                     "plate_step_9": "5",
                     "plate_step_boost": "Zosilnenie",
+                    "plate_step_boost_2": "Posilnenie 2",
                     "plate_step_warm": "Otep\u013eovanie"
                 }
             },

homeassistant/components/miele/translations/sv.json

@@ -237,7 +237,9 @@
                     "plate_step_6": "3\u2022",
                     "plate_step_7": "4",
                     "plate_step_8": "4\u2022",
-                    "plate_step_9": "5"
+                    "plate_step_9": "5",
+                    "plate_step_boost": "Boost",
+                    "plate_step_warm": "Varmh\u00e5llning"
                 }
             },
             "program_id": {
@@ -383,6 +385,8 @@
                     "codfish_piece": "Torsk (bit)",
                     "coffee": "Kaffe",
                     "coffee_pot": "Kaffekanna",
+                    "comfort_wash": "Komforttv\u00e4tt",
+                    "comfort_wash_plus": "Komforttv\u00e4tt plus",
                     "common_beans": "Vanliga b\u00f6nor",
                     "common_sole_fillet_1_cm": "R\u00f6dtunga (fil\u00e9, 1 cm)",
                     "common_sole_fillet_2_cm": "R\u00f6dtunga (fil\u00e9, 2 cm)",
@@ -1055,20 +1059,68 @@
         "config_entry_not_ready": {
             "message": "Fel n\u00e4r integrationen laddades"
         },
+        "get_programs_error": {
+            "message": "\u00c5tg\u00e4rden 'H\u00e4mta program' misslyckades: {status} / {message}"
+        },
+        "invalid_target": {
+            "message": "Ogiltig m\u00e5lenhet"
+        },
+        "set_program_error": {
+            "message": "\u00c5tg\u00e4rden 'St\u00e4ll in program' misslyckades: {status} / {message}"
+        },
+        "set_program_oven_error": {
+            "message": "\u00c5tg\u00e4rden \"St\u00e4ll in program p\u00e5 ugnen\" misslyckades: {status} / {message}"
+        },
         "set_state_error": {
             "message": "Det gick inte att ange tillst\u00e5nd f\u00f6r {entity}."
         }
     },
     "services": {
+        "get_programs": {
+            "description": "Returnerar en lista \u00f6ver tillg\u00e4ngliga program.",
+            "fields": {
+                "device_id": {
+                    "description": "M\u00e5lenheten f\u00f6r den h\u00e4r \u00e5tg\u00e4rden.",
+                    "name": "Enhet"
+                }
+            },
+            "name": "H\u00e4mta program"
+        },
+        "set_program": {
+            "description": "St\u00e4ller in och startar ett program p\u00e5 apparaten.",
+            "fields": {
+                "device_id": {
+                    "description": "M\u00e5lenheten f\u00f6r den h\u00e4r \u00e5tg\u00e4rden.",
+                    "name": "Enhet"
+                },
+                "program_id": {
+                    "description": "ID f\u00f6r det program som ska st\u00e4llas in.",
+                    "name": "Program-ID"
+                }
+            },
+            "name": "St\u00e4ll in program"
+        },
         "set_program_oven": {
+            "description": "St\u00e4ller in och startar ett program p\u00e5 apparaten.",
             "fields": {
+                "device_id": {
+                    "description": "M\u00e5lenheten f\u00f6r den h\u00e4r \u00e5tg\u00e4rden.",
+                    "name": "Enhet"
+                },
                 "duration": {
+                    "description": "Ugnsprogrammets varaktighet.",
                     "name": "Varaktighet"
                 },
+                "program_id": {
+                    "description": "ID f\u00f6r det program som ska st\u00e4llas in.",
+                    "name": "Program-ID"
+                },
                 "temperature": {
+                    "description": "M\u00e5ltemperaturen f\u00f6r ugnsprogrammet.",
                     "name": "Temperatur"
                 }
-            }
+            },
+            "name": "St\u00e4ll in program p\u00e5 ugnen"
         }
     }
 }

homeassistant/components/miele/translations/zh-Hans.json

@@ -239,6 +239,7 @@
                     "plate_step_8": "4\u2022",
                     "plate_step_9": "5",
                     "plate_step_boost": "\u5f3a\u52b2",
+                    "plate_step_boost_2": "\u5f3a\u52b2 2",
                     "plate_step_warm": "\u52a0\u70ed\u4e2d"
                 }
             },

homeassistant/components/miele/translations/zh-Hant.json

@@ -239,6 +239,7 @@
                     "plate_step_8": "4\u2022",
                     "plate_step_9": "5",
                     "plate_step_boost": "\u5168\u901f",
+                    "plate_step_boost_2": "\u5168\u901f 2",
                     "plate_step_warm": "\u52a0\u6eab\u4e2d"
                 }
             },

homeassistant/components/mill/translations/ga.json

@@ -0,0 +1,27 @@
+{
+    "entity": {
+        "sensor": {
+            "control_signal": {
+                "name": "Comhartha rialaithe"
+            },
+            "current_power": {
+                "name": "Cumhacht reatha"
+            },
+            "day_consumption": {
+                "name": "Tomhaltas lae"
+            },
+            "estimated_co2": {
+                "name": "CO2 measta"
+            },
+            "tvoc": {
+                "name": "TVOC"
+            },
+            "uncalibrated_temperature": {
+                "name": "Teocht neamhchalabraithe"
+            },
+            "year_consumption": {
+                "name": "Tomhaltas bliant\u00fail"
+            }
+        }
+    }
+}

homeassistant/components/minecraft_server/translations/ga.json

@@ -13,6 +13,9 @@
     },
     "entity": {
         "sensor": {
+            "edition": {
+                "name": "Eagr\u00e1n"
+            },
             "game_mode": {
                 "name": "M\u00f3d cluiche"
             },

homeassistant/components/mjpeg/translations/pt.json

@@ -13,6 +13,7 @@
                     "mjpeg_url": "URL do MJPEG",
                     "name": "Nome",
                     "password": "Palavra-passe",
+                    "still_image_url": "URL da imagem fixa",
                     "username": "Nome de Utilizador",
                     "verify_ssl": "Verificar o certificado SSL"
                 }

homeassistant/components/modbus/translations/ga.json

@@ -23,6 +23,10 @@
         "no_entities": {
             "description": "Cuir eintiteas amh\u00e1in ar a laghad le Modbus {sub_1} i do chomhad configuration.yaml agus atos\u00fa Home Assistant chun an fhadhb seo a r\u00e9iteach.",
             "title": "N\u00edl aon eintitis i Modbus {sub_1}, n\u00edor l\u00f3d\u00e1ileadh an iontr\u00e1il."
+        },
+        "removed_lazy_error_count": {
+            "description": "Bain an eochair `{config_key}` as an iontr\u00e1il {integration} i do chomhad configuration.yaml agus atos\u00fa Home Assistant chun an fhadhb seo a r\u00e9iteach. Tuairisceofar gach earr\u00e1id, toisc go nglactar le lazy_error_count ach go nd\u00e9antar neamhaird de.",
+            "title": "T\u00e1 eochair chumra\u00edochta {config_key} \u00e1 baint"
         }
     }
 }

homeassistant/components/modbus/translations/pt.json

@@ -35,6 +35,7 @@
             "name": "Recarregar"
         },
         "restart": {
+            "description": "Reinicia um hub Modbus (se estiver a funcionar, p\u00e1ra e depois come\u00e7a).",
             "fields": {
                 "hub": {
                     "description": "Nome do hub Modbus.",
@@ -44,6 +45,7 @@
             "name": "Reiniciar"
         },
         "stop": {
+            "description": "Para o hub Modbus.",
             "fields": {
                 "hub": {
                     "description": "Nome do hub Modbus.",

homeassistant/components/modern_forms/translations/ga.json

@@ -0,0 +1,37 @@
+{
+    "config": {
+        "step": {
+            "user": {
+                "data_description": {
+                    "host": "Ainm \u00f3stach n\u00f3 seoladh IP do lucht lean\u00fana Modern Forms."
+                }
+            }
+        }
+    },
+    "entity": {
+        "binary_sensor": {
+            "fan_sleep_timer_active": {
+                "name": "Amad\u00f3ir codlata lucht lean\u00fana gn\u00edomhach"
+            },
+            "light_sleep_timer_active": {
+                "name": "Uainead\u00f3ir codlata solais gn\u00edomhach"
+            }
+        },
+        "sensor": {
+            "fan_timer_remaining_time": {
+                "name": "Am codlata lucht lean\u00fana"
+            },
+            "light_timer_remaining_time": {
+                "name": "Am codlata \u00e9adrom"
+            }
+        },
+        "switch": {
+            "adaptive_learning": {
+                "name": "Foghlaim oiri\u00fanaitheach"
+            },
+            "away_mode": {
+                "name": "M\u00f3d as baile"
+            }
+        }
+    }
+}

homeassistant/components/moehlenhoff_alpha2/translations/ga.json

@@ -0,0 +1,11 @@
+{
+    "config": {
+        "step": {
+            "user": {
+                "data_description": {
+                    "host": "Ainm \u00f3stach n\u00f3 seoladh IP do ch\u00f3rais M\u00f6hlenhoff Alpha2."
+                }
+            }
+        }
+    }
+}

homeassistant/components/moon/translations/ga.json

@@ -0,0 +1,9 @@
+{
+    "entity": {
+        "sensor": {
+            "phase": {
+                "name": "C\u00e9im"
+            }
+        }
+    }
+}

homeassistant/components/motion_blinds/translations/ga.json

@@ -7,6 +7,25 @@
             "set_favorite": {
                 "name": "Socraigh an su\u00edomh reatha mar is fearr leat"
             }
+        },
+        "cover": {
+            "bottom": {
+                "name": "Bun"
+            },
+            "combined": {
+                "name": "Comhcheangailte"
+            },
+            "top": {
+                "name": "Barr"
+            }
+        },
+        "sensor": {
+            "bottom_battery": {
+                "name": "Ceallra\u00ed bun"
+            },
+            "top_battery": {
+                "name": "Ceallra\u00ed barr"
+            }
         }
     }
 }

homeassistant/components/motionblinds_ble/translations/ca.json

@@ -30,7 +30,12 @@
         },
         "select": {
             "speed": {
-                "name": "Velocitat"
+                "name": "Velocitat",
+                "state": {
+                    "1": "Baix/a",
+                    "2": "Mitj\u00e0/na",
+                    "3": "Alt/a"
+                }
             }
         },
         "sensor": {
@@ -45,7 +50,9 @@
             "connection": {
                 "name": "Estat de connexi\u00f3",
                 "state": {
+                    "connected": "Connectat",
                     "connecting": "Connectant",
+                    "disconnected": "Desconnectat",
                     "disconnecting": "Desconnectant"
                 }
             }

homeassistant/components/motioneye/translations/ga.json

@@ -0,0 +1,29 @@
+{
+    "entity": {
+        "sensor": {
+            "actions": {
+                "name": "Gn\u00edomhartha"
+            }
+        },
+        "switch": {
+            "motion_detection": {
+                "name": "Brath gluaisne"
+            },
+            "movies": {
+                "name": "Scann\u00e1in"
+            },
+            "still_images": {
+                "name": "\u00cdomh\u00e1nna neamhghluaiste"
+            },
+            "text_overlay": {
+                "name": "Forleagan t\u00e9acs"
+            },
+            "upload_enabled": {
+                "name": "Uasl\u00f3d\u00e1il cumasaithe"
+            },
+            "video_streaming": {
+                "name": "Sruth\u00fa f\u00edse"
+            }
+        }
+    }
+}

homeassistant/components/motionmount/translations/ga.json

@@ -3,9 +3,14 @@
         "incorrect_pin": "N\u00edl an UAP ceart"
     },
     "config": {
+        "abort": {
+            "invalid_response": "Theip ar an nascadh mar gheall ar fhreagra neamhbhail\u00ed \u00f3n MotionMount.",
+            "not_connected": "Theip ar an nascadh."
+        },
         "error": {
             "pin": "N\u00edl an UAP ceart"
         },
+        "flow_title": "{name}",
         "progress": {
             "progress_action": "An iomarca iarrachta\u00ed UAP m\u00edchearta. Fan le do thoil {timeout} s..."
         },
@@ -25,7 +30,13 @@
                 "data_description": {
                     "host": "Ainm \u00f3stach n\u00f3 seoladh IP an MotionMount.",
                     "port": "Calafort an MotionMount."
-                }
+                },
+                "description": "Socraigh do MotionMount chun comhth\u00e1th\u00fa le Home Assistant.",
+                "title": "Ceangail do MotionMount"
+            },
+            "zeroconf_confirm": {
+                "description": "Ar mhaith leat {name} a chur ar bun?",
+                "title": "Fuarthas MotionMount"
             }
         }
     },
@@ -35,9 +46,17 @@
                 "name": "Ag Bogadh"
             }
         },
+        "number": {
+            "motionmount_extension": {
+                "name": "S\u00edneadh"
+            }
+        },
         "select": {
             "motionmount_preset": {
-                "name": "R\u00e9amhshocr\u00fa"
+                "name": "R\u00e9amhshocr\u00fa",
+                "state": {
+                    "0_wall": "0: Balla"
+                }
             }
         },
         "sensor": {