esphome 2025.3.3__py3-none-any.whl → 2025.4.0__py3-none-any.whl

esphome/components/xiaomi_mjyd02yla/binary_sensor.py

@@ -1,23 +1,23 @@
 import esphome.codegen as cg
+from esphome.components import binary_sensor, esp32_ble_tracker, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, binary_sensor, esp32_ble_tracker
 from esphome.const import (
-    CONF_MAC_ADDRESS,
+    CONF_BATTERY_LEVEL,
     CONF_BINDKEY,
+    CONF_IDLE_TIME,
+    CONF_ILLUMINANCE,
     CONF_LIGHT,
-    CONF_BATTERY_LEVEL,
+    CONF_MAC_ADDRESS,
     DEVICE_CLASS_BATTERY,
     DEVICE_CLASS_ILLUMINANCE,
     DEVICE_CLASS_LIGHT,
     DEVICE_CLASS_MOTION,
     ENTITY_CATEGORY_DIAGNOSTIC,
+    ICON_TIMELAPSE,
     STATE_CLASS_MEASUREMENT,
-    UNIT_PERCENT,
-    CONF_IDLE_TIME,
-    CONF_ILLUMINANCE,
-    UNIT_MINUTE,
     UNIT_LUX,
-    ICON_TIMELAPSE,
+    UNIT_MINUTE,
+    UNIT_PERCENT,
 )
 
 DEPENDENCIES = ["esp32_ble_tracker"]

esphome/components/xiaomi_mue4094rt/binary_sensor.py

@@ -1,12 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import binary_sensor, esp32_ble_tracker
-from esphome.const import (
-    CONF_MAC_ADDRESS,
-    CONF_TIMEOUT,
-    DEVICE_CLASS_MOTION,
-)
-
+import esphome.config_validation as cv
+from esphome.const import CONF_MAC_ADDRESS, CONF_TIMEOUT, DEVICE_CLASS_MOTION
 
 DEPENDENCIES = ["esp32_ble_tracker"]
 AUTO_LOAD = ["xiaomi_ble"]

esphome/components/xiaomi_rtcgq02lm/__init__.py

@@ -1,8 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import esp32_ble_tracker
-from esphome.const import CONF_MAC_ADDRESS, CONF_ID, CONF_BINDKEY
-
+import esphome.config_validation as cv
+from esphome.const import CONF_BINDKEY, CONF_ID, CONF_MAC_ADDRESS
 
 AUTO_LOAD = ["xiaomi_ble"]
 CODEOWNERS = ["@jesserockz"]

esphome/components/xiaomi_rtcgq02lm/binary_sensor.py

@@ -1,14 +1,14 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import binary_sensor
+import esphome.config_validation as cv
 from esphome.const import (
+    CONF_BUTTON,
+    CONF_ID,
     CONF_LIGHT,
     CONF_MOTION,
     CONF_TIMEOUT,
     DEVICE_CLASS_LIGHT,
     DEVICE_CLASS_MOTION,
-    CONF_ID,
-    CONF_BUTTON,
 )
 from esphome.core import TimePeriod
 

esphome/components/xiaomi_rtcgq02lm/sensor.py

@@ -1,13 +1,13 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_BATTERY_LEVEL,
+    CONF_ID,
+    DEVICE_CLASS_BATTERY,
     ENTITY_CATEGORY_DIAGNOSTIC,
     STATE_CLASS_MEASUREMENT,
     UNIT_PERCENT,
-    CONF_ID,
-    DEVICE_CLASS_BATTERY,
 )
 
 from . import XiaomiRTCGQ02LM

esphome/components/xiaomi_wx08zm/binary_sensor.py

@@ -1,18 +1,17 @@
 import esphome.codegen as cg
+from esphome.components import binary_sensor, esp32_ble_tracker, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, binary_sensor, esp32_ble_tracker
 from esphome.const import (
     CONF_BATTERY_LEVEL,
     CONF_MAC_ADDRESS,
     CONF_TABLET,
     DEVICE_CLASS_BATTERY,
     ENTITY_CATEGORY_DIAGNOSTIC,
+    ICON_BUG,
     STATE_CLASS_MEASUREMENT,
     UNIT_PERCENT,
-    ICON_BUG,
 )
 
-
 DEPENDENCIES = ["esp32_ble_tracker"]
 AUTO_LOAD = ["xiaomi_ble", "sensor"]
 

esphome/components/xl9535/__init__.py

@@ -1,6 +1,7 @@
+from esphome import pins
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     CONF_INPUT,
@@ -9,7 +10,6 @@ from esphome.const import (
     CONF_NUMBER,
     CONF_OUTPUT,
 )
-from esphome import pins
 
 CONF_XL9535 = "xl9535"
 

esphome/components/yashima/climate.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import climate, remote_transmitter, sensor
 from esphome.components.remote_base import CONF_TRANSMITTER_ID
+import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_SENSOR, CONF_SUPPORTS_COOL, CONF_SUPPORTS_HEAT
 
 AUTO_LOAD = ["sensor"]

esphome/components/zhlt01/climate.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import climate_ir
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 AUTO_LOAD = ["climate_ir"]

esphome/components/zio_ultrasonic/sensor.py

@@ -1,10 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
-from esphome.const import (
-    DEVICE_CLASS_DISTANCE,
-    STATE_CLASS_MEASUREMENT,
-)
+import esphome.config_validation as cv
+from esphome.const import DEVICE_CLASS_DISTANCE, STATE_CLASS_MEASUREMENT
 
 DEPENDENCIES = ["i2c"]
 CODEOWNERS = ["@kahrendt"]

esphome/components/zyaura/sensor.py

@@ -1,22 +1,22 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
-    CONF_ID,
     CONF_CLOCK_PIN,
-    CONF_DATA_PIN,
     CONF_CO2,
-    CONF_TEMPERATURE,
+    CONF_DATA_PIN,
     CONF_HUMIDITY,
+    CONF_ID,
+    CONF_TEMPERATURE,
     DEVICE_CLASS_CARBON_DIOXIDE,
     DEVICE_CLASS_HUMIDITY,
     DEVICE_CLASS_TEMPERATURE,
+    ICON_MOLECULE_CO2,
     STATE_CLASS_MEASUREMENT,
-    UNIT_PARTS_PER_MILLION,
     UNIT_CELSIUS,
+    UNIT_PARTS_PER_MILLION,
     UNIT_PERCENT,
-    ICON_MOLECULE_CO2,
 )
 from esphome.cpp_helpers import gpio_pin_expression
 

esphome/config_validation.py

@@ -1499,30 +1499,9 @@ def dimensions(value):
 
 
 def directory(value):
-    import json
-
     value = string(value)
     path = CORE.relative_config_path(value)
 
-    if CORE.vscode and (
-        not CORE.ace or os.path.abspath(path) == os.path.abspath(CORE.config_path)
-    ):
-        print(
-            json.dumps(
-                {
-                    "type": "check_directory_exists",
-                    "path": path,
-                }
-            )
-        )
-        data = json.loads(input())
-        assert data["type"] == "directory_exists_response"
-        if data["content"]:
-            return value
-        raise Invalid(
-            f"Could not find directory '{path}'. Please make sure it exists (full path: {os.path.abspath(path)})."
-        )
-
     if not os.path.exists(path):
         raise Invalid(
             f"Could not find directory '{path}'. Please make sure it exists (full path: {os.path.abspath(path)})."
@@ -1535,30 +1514,9 @@ def directory(value):
 
 
 def file_(value):
-    import json
-
     value = string(value)
     path = CORE.relative_config_path(value)
 
-    if CORE.vscode and (
-        not CORE.ace or os.path.abspath(path) == os.path.abspath(CORE.config_path)
-    ):
-        print(
-            json.dumps(
-                {
-                    "type": "check_file_exists",
-                    "path": path,
-                }
-            )
-        )
-        data = json.loads(input())
-        assert data["type"] == "file_exists_response"
-        if data["content"]:
-            return value
-        raise Invalid(
-            f"Could not find file '{path}'. Please make sure it exists (full path: {os.path.abspath(path)})."
-        )
-
     if not os.path.exists(path):
         raise Invalid(
             f"Could not find file '{path}'. Please make sure it exists (full path: {os.path.abspath(path)})."

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "2025.3.3"
+__version__ = "2025.4.0"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 VALID_SUBSTITUTIONS_CHARACTERS = (
@@ -196,8 +196,10 @@ CONF_DC_PIN = "dc_pin"
 CONF_DEASSERT_RTS_DTR = "deassert_rts_dtr"
 CONF_DEBOUNCE = "debounce"
 CONF_DEBUG = "debug"
+CONF_DEBUG_SCHEDULER = "debug_scheduler"
 CONF_DECAY_MODE = "decay_mode"
 CONF_DECELERATION = "deceleration"
+CONF_DEFAULT = "default"
 CONF_DEFAULT_MODE = "default_mode"
 CONF_DEFAULT_TARGET_TEMPERATURE_HIGH = "default_target_temperature_high"
 CONF_DEFAULT_TARGET_TEMPERATURE_LOW = "default_target_temperature_low"

esphome/core/__init__.py

@@ -475,7 +475,6 @@ class EsphomeCore:
         self.dashboard = False
         # True if command is run from vscode api
         self.vscode = False
-        self.ace = False
         # The name of the node
         self.name: Optional[str] = None
         # The friendly name of the node

esphome/core/component.cpp

@@ -79,7 +79,7 @@ void Component::call_setup() { this->setup(); }
 void Component::call_dump_config() {
   this->dump_config();
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "  Component %s is marked FAILED", this->get_component_source());
+    ESP_LOGE(TAG, "  Component %s is marked FAILED: %s", this->get_component_source(), this->error_message_.c_str());
   }
 }
 
@@ -162,6 +162,8 @@ void Component::status_set_error(const char *message) {
   this->component_state_ |= STATUS_LED_ERROR;
   App.app_state_ |= STATUS_LED_ERROR;
   ESP_LOGE(TAG, "Component %s set Error flag: %s", this->get_component_source(), message);
+  if (strcmp(message, "unspecified") != 0)
+    this->error_message_ = message;
 }
 void Component::status_clear_warning() {
   if ((this->component_state_ & STATUS_LED_WARNING) == 0)

esphome/core/component.h

@@ -118,6 +118,11 @@ class Component {
    */
   virtual void mark_failed();
 
+  void mark_failed(const char *message) {
+    this->status_set_error(message);
+    this->mark_failed();
+  }
+
   bool is_failed() const;
 
   bool is_ready() const;
@@ -165,10 +170,17 @@ class Component {
    * This will call f every interval ms. Can be cancelled via CancelInterval().
    * Similar to javascript's setInterval().
    *
-   * IMPORTANT: Do not rely on this having correct timing. This is only called from
-   * loop() and therefore can be significantly delay. If you need exact timing please
+   * IMPORTANT NOTE:
+   * The only guarantee offered by this call is that the callback will be called no *earlier* than
+   * the specified interval after the previous call. Any given interval may be longer due to
+   * other components blocking the loop() call.
+   *
+   * So do not rely on this having correct timing. If you need exact timing please
    * use hardware timers.
    *
+   * Note also that the first call to f will not happen immediately, but after a random delay. This is
+   * intended to prevent many interval functions from being called at the same time.
+   *
    * @param name The identifier for this interval function.
    * @param interval The interval in ms.
    * @param f The function (or lambda) that should be called
@@ -272,6 +284,7 @@ class Component {
   uint32_t component_state_{0x0000};  ///< State of this component.
   float setup_priority_override_{NAN};
   const char *component_source_{nullptr};
+  std::string error_message_{};
 };
 
 /** This class simplifies creating components that periodically check a state.

esphome/core/config.py

@@ -10,6 +10,7 @@ from esphome.const import (
     CONF_BUILD_PATH,
     CONF_COMMENT,
     CONF_COMPILE_PROCESS_LIMIT,
+    CONF_DEBUG_SCHEDULER,
     CONF_ESPHOME,
     CONF_FRIENDLY_NAME,
     CONF_INCLUDES,
@@ -144,6 +145,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_INCLUDES, default=[]): cv.ensure_list(valid_include),
             cv.Optional(CONF_LIBRARIES, default=[]): cv.ensure_list(cv.string_strict),
             cv.Optional(CONF_NAME_ADD_MAC_SUFFIX, default=False): cv.boolean,
+            cv.Optional(CONF_DEBUG_SCHEDULER, default=False): cv.boolean,
             cv.Optional(CONF_PROJECT): cv.Schema(
                 {
                     cv.Required(CONF_NAME): cv.All(
@@ -369,6 +371,8 @@ async def to_code(config):
     cg.add_build_flag("-Wno-unused-variable")
     cg.add_build_flag("-Wno-unused-but-set-variable")
     cg.add_build_flag("-Wno-sign-compare")
+    if config[CONF_DEBUG_SCHEDULER]:
+        cg.add_define("ESPHOME_DEBUG_SCHEDULER")
 
     if CORE.using_arduino and not CORE.is_bk72xx:
         CORE.add_job(add_arduino_global_workaround)

esphome/core/defines.h

@@ -13,6 +13,7 @@
 #define ESPHOME_PROJECT_VERSION "v2"
 #define ESPHOME_PROJECT_VERSION_30 "v2"
 #define ESPHOME_VARIANT "ESP32"
+#define ESPHOME_DEBUG_SCHEDULER
 
 // logger
 #define ESPHOME_LOG_LEVEL ESPHOME_LOG_LEVEL_VERY_VERBOSE
@@ -47,16 +48,36 @@
 #define USE_LOGGER
 #define USE_LVGL
 #define USE_LVGL_ANIMIMG
+#define USE_LVGL_ARC
 #define USE_LVGL_BINARY_SENSOR
+#define USE_LVGL_BUTTON
 #define USE_LVGL_BUTTONMATRIX
+#define USE_LVGL_CANVAS
+#define USE_LVGL_CHART
+#define USE_LVGL_CHECKBOX
 #define USE_LVGL_DROPDOWN
 #define USE_LVGL_FONT
 #define USE_LVGL_IMAGE
+#define USE_LVGL_IMAGEBUTTON
 #define USE_LVGL_KEY_LISTENER
 #define USE_LVGL_KEYBOARD
+#define USE_LVGL_LABEL
+#define USE_LVGL_LINE
+#define USE_LVGL_LIST
+#define USE_LVGL_MENU
 #define USE_LVGL_METER
+#define USE_LVGL_MSGBOX
 #define USE_LVGL_ROLLER
 #define USE_LVGL_ROTARY_ENCODER
+#define USE_LVGL_SLIDER
+#define USE_LVGL_SPAN
+#define USE_LVGL_SPINBOX
+#define USE_LVGL_SPINNER
+#define USE_LVGL_SWITCH
+#define USE_LVGL_TABLE
+#define USE_LVGL_TABVIEW
+#define USE_LVGL_TEXTAREA
+#define USE_LVGL_TILEVIEW
 #define USE_LVGL_TOUCHSCREEN
 #define USE_MD5
 #define USE_MDNS

esphome/core/helpers.cpp

@@ -44,10 +44,7 @@
 #include <random>
 #endif
 #ifdef USE_ESP32
-#include "esp32/rom/crc.h"
-#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 3, 2)
-#include "esp_mac.h"
-#endif
+#include "rom/crc.h"
 #include "esp_efuse.h"
 #include "esp_efuse_table.h"
 #endif
@@ -70,7 +67,9 @@ static const uint16_t CRC16_8408_LE_LUT_L[] = {0x0000, 0x1189, 0x2312, 0x329b, 0
                                                0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7};
 static const uint16_t CRC16_8408_LE_LUT_H[] = {0x0000, 0x1081, 0x2102, 0x3183, 0x4204, 0x5285, 0x6306, 0x7387,
                                                0x8408, 0x9489, 0xa50a, 0xb58b, 0xc60c, 0xd68d, 0xe70e, 0xf78f};
+#endif
 
+#if !defined(USE_ESP32) || defined(USE_ESP32_VARIANT_ESP32S2)
 static const uint16_t CRC16_1021_BE_LUT_L[] = {0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
                                                0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef};
 static const uint16_t CRC16_1021_BE_LUT_H[] = {0x0000, 0x1231, 0x2462, 0x3653, 0x48c4, 0x5af5, 0x6ca6, 0x7e97,
@@ -151,7 +150,7 @@ uint16_t crc16(const uint8_t *data, uint16_t len, uint16_t crc, uint16_t reverse
 }
 
 uint16_t crc16be(const uint8_t *data, uint16_t len, uint16_t crc, uint16_t poly, bool refin, bool refout) {
-#ifdef USE_ESP32
+#if defined(USE_ESP32) && !defined(USE_ESP32_VARIANT_ESP32S2)
   if (poly == 0x1021) {
     crc = crc16_be(refin ? crc : (crc ^ 0xffff), data, len);
     return refout ? crc : (crc ^ 0xffff);
@@ -160,7 +159,7 @@ uint16_t crc16be(const uint8_t *data, uint16_t len, uint16_t crc, uint16_t poly,
   if (refin) {
     crc ^= 0xffff;
   }
-#ifndef USE_ESP32
+#if !defined(USE_ESP32) || defined(USE_ESP32_VARIANT_ESP32S2)
   if (poly == 0x1021) {
     while (len--) {
       uint8_t combo = (crc >> 8) ^ *data++;
@@ -178,7 +177,7 @@ uint16_t crc16be(const uint8_t *data, uint16_t len, uint16_t crc, uint16_t poly,
         }
       }
     }
-#ifndef USE_ESP32
+#if !defined(USE_ESP32) || defined(USE_ESP32_VARIANT_ESP32S2)
   }
 #endif
   return refout ? (crc ^ 0xffff) : crc;