esphome 2025.3.3__py3-none-any.whl → 2025.4.0__py3-none-any.whl

esphome/components/mcp4461/mcp4461.cpp

@@ -0,0 +1,618 @@
+#include "mcp4461.h"
+
+#include "esphome/core/helpers.h"
+#include "esphome/core/hal.h"
+
+namespace esphome {
+namespace mcp4461 {
+
+static const char *const TAG = "mcp4461";
+constexpr uint8_t EEPROM_WRITE_TIMEOUT_MS = 10;
+
+void Mcp4461Component::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up mcp4461 using address (0x%02X)...", this->address_);
+  auto err = this->write(nullptr, 0);
+  if (err != i2c::ERROR_OK) {
+    this->error_code_ = MCP4461_STATUS_I2C_ERROR;
+    this->mark_failed();
+    return;
+  }
+  // save WP/WL status
+  this->update_write_protection_status_();
+  for (uint8_t i = 0; i < 8; i++) {
+    if (this->reg_[i].initial_value.has_value()) {
+      uint16_t initial_state = static_cast<uint16_t>(*this->reg_[i].initial_value * 256.0f);
+      this->write_wiper_level_(i, initial_state);
+    }
+    if (this->reg_[i].enabled) {
+      this->reg_[i].state = this->read_wiper_level_(i);
+    } else {
+      // only volatile wipers can be set disabled on hw level
+      if (i < 4) {
+        this->reg_[i].state = 0;
+        Mcp4461WiperIdx wiper_idx = static_cast<Mcp4461WiperIdx>(i);
+        this->disable_wiper_(wiper_idx);
+      }
+    }
+  }
+}
+
+void Mcp4461Component::set_initial_value(Mcp4461WiperIdx wiper, float initial_value) {
+  uint8_t wiper_idx = static_cast<uint8_t>(wiper);
+  this->reg_[wiper_idx].initial_value = initial_value;
+}
+
+void Mcp4461Component::initialize_terminal_disabled(Mcp4461WiperIdx wiper, char terminal) {
+  uint8_t wiper_idx = static_cast<uint8_t>(wiper);
+  switch (terminal) {
+    case 'a':
+      this->reg_[wiper_idx].terminal_a = false;
+      break;
+    case 'b':
+      this->reg_[wiper_idx].terminal_b = false;
+      break;
+    case 'w':
+      this->reg_[wiper_idx].terminal_w = false;
+      break;
+  }
+}
+
+void Mcp4461Component::update_write_protection_status_() {
+  uint8_t status_register_value = this->get_status_register_();
+  this->write_protected_ = static_cast<bool>((status_register_value >> 0) & 0x01);
+  this->reg_[0].wiper_lock_active = static_cast<bool>((status_register_value >> 2) & 0x01);
+  this->reg_[1].wiper_lock_active = static_cast<bool>((status_register_value >> 3) & 0x01);
+  this->reg_[2].wiper_lock_active = static_cast<bool>((status_register_value >> 5) & 0x01);
+  this->reg_[3].wiper_lock_active = static_cast<bool>((status_register_value >> 6) & 0x01);
+}
+
+void Mcp4461Component::dump_config() {
+  ESP_LOGCONFIG(TAG, "mcp4461:");
+  LOG_I2C_DEVICE(this);
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "%s", LOG_STR_ARG(this->get_message_string(this->error_code_)));
+  }
+  // log wiper status
+  for (uint8_t i = 0; i < 8; ++i) {
+    // terminals only valid for volatile wipers 0-3 - enable/disable is terminal hw
+    // so also invalid for nonvolatile. For these, only print current level.
+    // reworked to be a one-line intentionally, as output would not be in order
+    if (i < 4) {
+      ESP_LOGCONFIG(TAG, "  ├── Volatile wiper [%u] level: %u, Status: %s, HW: %s, A: %s, B: %s, W: %s", i,
+                    this->reg_[i].state, ONOFF(this->reg_[i].terminal_hw), ONOFF(this->reg_[i].terminal_a),
+                    ONOFF(this->reg_[i].terminal_b), ONOFF(this->reg_[i].terminal_w), ONOFF(this->reg_[i].enabled));
+    } else {
+      ESP_LOGCONFIG(TAG, "  ├── Nonvolatile wiper [%u] level: %u", i, this->reg_[i].state);
+    }
+  }
+}
+
+void Mcp4461Component::loop() {
+  if (this->status_has_warning()) {
+    this->get_status_register_();
+  }
+  for (uint8_t i = 0; i < 8; i++) {
+    if (this->reg_[i].update_level) {
+      // set wiper i state if changed
+      if (this->reg_[i].state != this->read_wiper_level_(i)) {
+        this->write_wiper_level_(i, this->reg_[i].state);
+      }
+    }
+    this->reg_[i].update_level = false;
+    // can be true only for wipers 0-3
+    // setting changes for terminals of nonvolatile wipers
+    // is prohibited in public methods
+    if (this->reg_[i].update_terminal) {
+      // set terminal register changes
+      Mcp4461TerminalIdx terminal_connector =
+          i < 2 ? Mcp4461TerminalIdx::MCP4461_TERMINAL_0 : Mcp4461TerminalIdx::MCP4461_TERMINAL_1;
+      uint8_t new_terminal_value = this->calc_terminal_connector_byte_(terminal_connector);
+      ESP_LOGV(TAG, "updating terminal %u to new value %u", static_cast<uint8_t>(terminal_connector),
+               new_terminal_value);
+      this->set_terminal_register_(terminal_connector, new_terminal_value);
+    }
+    this->reg_[i].update_terminal = false;
+  }
+}
+
+uint8_t Mcp4461Component::get_status_register_() {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "%s", LOG_STR_ARG(this->get_message_string(this->error_code_)));
+    return 0;
+  }
+  uint8_t addr = static_cast<uint8_t>(Mcp4461Addresses::MCP4461_STATUS);
+  uint8_t reg = addr | static_cast<uint8_t>(Mcp4461Commands::READ);
+  uint16_t buf;
+  if (!this->read_byte_16(reg, &buf)) {
+    this->error_code_ = MCP4461_STATUS_REGISTER_ERROR;
+    this->mark_failed();
+    return 0;
+  }
+  uint8_t msb = buf >> 8;
+  uint8_t lsb = static_cast<uint8_t>(buf & 0x00ff);
+  if (msb != 1 || ((lsb >> 7) & 0x01) != 1 || ((lsb >> 1) & 0x01) != 1) {
+    // D8, D7 and R1 bits are hardlocked to 1 -> a status msb bit 0 (bit 9 of status register) of 0 or lsb bit 1/7 = 0
+    // indicate device/communication issues, therefore mark component failed
+    this->error_code_ = MCP4461_STATUS_REGISTER_INVALID;
+    this->mark_failed();
+    return 0;
+  }
+  this->status_clear_warning();
+  return lsb;
+}
+
+void Mcp4461Component::read_status_register_to_log() {
+  uint8_t status_register_value = this->get_status_register_();
+  ESP_LOGI(TAG, "D7:  %u, WL3: %u, WL2: %u, EEWA: %u, WL1: %u, WL0: %u, R1: %u, WP: %u",
+           ((status_register_value >> 7) & 0x01), ((status_register_value >> 6) & 0x01),
+           ((status_register_value >> 5) & 0x01), ((status_register_value >> 4) & 0x01),
+           ((status_register_value >> 3) & 0x01), ((status_register_value >> 2) & 0x01),
+           ((status_register_value >> 1) & 0x01), ((status_register_value >> 0) & 0x01));
+}
+
+uint8_t Mcp4461Component::get_wiper_address_(uint8_t wiper) {
+  uint8_t addr;
+  bool nonvolatile = false;
+  if (wiper > 3) {
+    nonvolatile = true;
+    wiper = wiper - 4;
+  }
+  switch (wiper) {
+    case 0:
+      addr = static_cast<uint8_t>(Mcp4461Addresses::MCP4461_VW0);
+      break;
+    case 1:
+      addr = static_cast<uint8_t>(Mcp4461Addresses::MCP4461_VW1);
+      break;
+    case 2:
+      addr = static_cast<uint8_t>(Mcp4461Addresses::MCP4461_VW2);
+      break;
+    case 3:
+      addr = static_cast<uint8_t>(Mcp4461Addresses::MCP4461_VW3);
+      break;
+    default:
+      ESP_LOGW(TAG, "unknown wiper specified");
+      return 0;
+  }
+  if (nonvolatile) {
+    addr = addr + 0x20;
+  }
+  return addr;
+}
+
+uint16_t Mcp4461Component::get_wiper_level_(Mcp4461WiperIdx wiper) {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "%s", LOG_STR_ARG(this->get_message_string(this->error_code_)));
+    return 0;
+  }
+  uint8_t wiper_idx = static_cast<uint8_t>(wiper);
+  if (!(this->reg_[wiper_idx].enabled)) {
+    ESP_LOGW(TAG, "%s", LOG_STR_ARG(this->get_message_string(MCP4461_WIPER_DISABLED)));
+    return 0;
+  }
+  if (!(this->reg_[wiper_idx].enabled)) {
+    ESP_LOGW(TAG, "reading from disabled volatile wiper %u, returning 0", wiper_idx);
+    return 0;
+  }
+  return this->read_wiper_level_(wiper_idx);
+}
+
+uint16_t Mcp4461Component::read_wiper_level_(uint8_t wiper_idx) {
+  uint8_t addr = this->get_wiper_address_(wiper_idx);
+  uint8_t reg = addr | static_cast<uint8_t>(Mcp4461Commands::INCREMENT);
+  if (wiper_idx > 3) {
+    if (!this->is_eeprom_ready_for_writing_(true)) {
+      return 0;
+    }
+  }
+  uint16_t buf = 0;
+  if (!(this->read_byte_16(reg, &buf))) {
+    this->error_code_ = MCP4461_STATUS_I2C_ERROR;
+    this->status_set_warning();
+    ESP_LOGW(TAG, "Error fetching %swiper %u value", (wiper_idx > 3) ? "nonvolatile " : "", wiper_idx);
+    return 0;
+  }
+  return buf;
+}
+
+bool Mcp4461Component::update_wiper_level_(Mcp4461WiperIdx wiper) {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "%s", LOG_STR_ARG(this->get_message_string(this->error_code_)));
+    return false;
+  }
+  uint8_t wiper_idx = static_cast<uint8_t>(wiper);
+  if (!(this->reg_[wiper_idx].enabled)) {
+    ESP_LOGW(TAG, "%s", LOG_STR_ARG(this->get_message_string(MCP4461_WIPER_DISABLED)));
+    return false;
+  }
+  uint16_t data = this->get_wiper_level_(wiper);
+  ESP_LOGV(TAG, "Got value %u from wiper %u", data, wiper_idx);
+  this->reg_[wiper_idx].state = data;
+  return true;
+}
+
+bool Mcp4461Component::set_wiper_level_(Mcp4461WiperIdx wiper, uint16_t value) {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "%s", LOG_STR_ARG(this->get_message_string(this->error_code_)));
+    return false;
+  }
+  uint8_t wiper_idx = static_cast<uint8_t>(wiper);
+  if (value > 0x100) {
+    ESP_LOGW(TAG, "%s", LOG_STR_ARG(this->get_message_string(MCP4461_VALUE_INVALID)));
+    return false;
+  }
+  if (!(this->reg_[wiper_idx].enabled)) {
+    ESP_LOGW(TAG, "%s", LOG_STR_ARG(this->get_message_string(MCP4461_WIPER_DISABLED)));
+    return false;
+  }
+  if (this->reg_[wiper_idx].wiper_lock_active) {
+    ESP_LOGW(TAG, "%s", LOG_STR_ARG(this->get_message_string(MCP4461_WIPER_LOCKED)));
+    return false;
+  }
+  ESP_LOGV(TAG, "Setting MCP4461 wiper %u to %u", wiper_idx, value);
+  this->reg_[wiper_idx].state = value;
+  this->reg_[wiper_idx].update_level = true;
+  return true;
+}
+
+void Mcp4461Component::write_wiper_level_(uint8_t wiper, uint16_t value) {
+  bool nonvolatile = wiper > 3;
+  if (!(this->mcp4461_write_(this->get_wiper_address_(wiper), value, nonvolatile))) {
+    this->error_code_ = MCP4461_STATUS_I2C_ERROR;
+    this->status_set_warning();
+    ESP_LOGW(TAG, "Error writing %swiper %u level %u", (wiper > 3) ? "nonvolatile " : "", wiper, value);
+  }
+}
+
+void Mcp4461Component::enable_wiper_(Mcp4461WiperIdx wiper) {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "%s", LOG_STR_ARG(this->get_message_string(this->error_code_)));
+    return;
+  }
+  uint8_t wiper_idx = static_cast<uint8_t>(wiper);
+  if ((this->reg_[wiper_idx].enabled)) {
+    ESP_LOGW(TAG, "%s", LOG_STR_ARG(this->get_message_string(MCP4461_WIPER_ENABLED)));
+    return;
+  }
+  if (this->reg_[wiper_idx].wiper_lock_active) {
+    ESP_LOGW(TAG, "%s", LOG_STR_ARG(this->get_message_string(MCP4461_WIPER_LOCKED)));
+    return;
+  }
+  ESP_LOGV(TAG, "Enabling wiper %u", wiper_idx);
+  this->reg_[wiper_idx].enabled = true;
+  if (wiper_idx < 4) {
+    this->reg_[wiper_idx].terminal_hw = true;
+    this->reg_[wiper_idx].update_terminal = true;
+  }
+}
+
+void Mcp4461Component::disable_wiper_(Mcp4461WiperIdx wiper) {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "%s", LOG_STR_ARG(this->get_message_string(this->error_code_)));
+    return;
+  }
+  uint8_t wiper_idx = static_cast<uint8_t>(wiper);
+  if (!(this->reg_[wiper_idx].enabled)) {
+    ESP_LOGW(TAG, "%s", LOG_STR_ARG(this->get_message_string(MCP4461_WIPER_DISABLED)));
+    return;
+  }
+  if (this->reg_[wiper_idx].wiper_lock_active) {
+    ESP_LOGW(TAG, "%s", LOG_STR_ARG(this->get_message_string(MCP4461_WIPER_LOCKED)));
+    return;
+  }
+  ESP_LOGV(TAG, "Disabling wiper %u", wiper_idx);
+  this->reg_[wiper_idx].enabled = true;
+  if (wiper_idx < 4) {
+    this->reg_[wiper_idx].terminal_hw = true;
+    this->reg_[wiper_idx].update_terminal = true;
+  }
+}
+
+bool Mcp4461Component::increase_wiper_(Mcp4461WiperIdx wiper) {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "%s", LOG_STR_ARG(this->get_message_string(this->error_code_)));
+    return false;
+  }
+  uint8_t wiper_idx = static_cast<uint8_t>(wiper);
+  if (!(this->reg_[wiper_idx].enabled)) {
+    ESP_LOGW(TAG, "%s", LOG_STR_ARG(this->get_message_string(MCP4461_WIPER_DISABLED)));
+    return false;
+  }
+  if (this->reg_[wiper_idx].wiper_lock_active) {
+    ESP_LOGW(TAG, "%s", LOG_STR_ARG(this->get_message_string(MCP4461_WIPER_LOCKED)));
+    return false;
+  }
+  if (this->reg_[wiper_idx].state == 256) {
+    ESP_LOGV(TAG, "Maximum wiper level reached, further increase of wiper %u prohibited", wiper_idx);
+    return false;
+  }
+  ESP_LOGV(TAG, "Increasing wiper %u", wiper_idx);
+  uint8_t addr = this->get_wiper_address_(wiper_idx);
+  uint8_t reg = addr | static_cast<uint8_t>(Mcp4461Commands::INCREMENT);
+  auto err = this->write(&this->address_, reg, sizeof(reg));
+  if (err != i2c::ERROR_OK) {
+    this->error_code_ = MCP4461_STATUS_I2C_ERROR;
+    this->status_set_warning();
+    return false;
+  }
+  this->reg_[wiper_idx].state++;
+  return true;
+}
+
+bool Mcp4461Component::decrease_wiper_(Mcp4461WiperIdx wiper) {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "%s", LOG_STR_ARG(this->get_message_string(this->error_code_)));
+    return false;
+  }
+  uint8_t wiper_idx = static_cast<uint8_t>(wiper);
+  if (!(this->reg_[wiper_idx].enabled)) {
+    ESP_LOGW(TAG, "%s", LOG_STR_ARG(this->get_message_string(MCP4461_WIPER_DISABLED)));
+    return false;
+  }
+  if (this->reg_[wiper_idx].wiper_lock_active) {
+    ESP_LOGW(TAG, "%s", LOG_STR_ARG(this->get_message_string(MCP4461_WIPER_LOCKED)));
+    return false;
+  }
+  if (this->reg_[wiper_idx].state == 0) {
+    ESP_LOGV(TAG, "Minimum wiper level reached, further decrease of wiper %u prohibited", wiper_idx);
+    return false;
+  }
+  ESP_LOGV(TAG, "Decreasing wiper %u", wiper_idx);
+  uint8_t addr = this->get_wiper_address_(wiper_idx);
+  uint8_t reg = addr | static_cast<uint8_t>(Mcp4461Commands::DECREMENT);
+  auto err = this->write(&this->address_, reg, sizeof(reg));
+  if (err != i2c::ERROR_OK) {
+    this->error_code_ = MCP4461_STATUS_I2C_ERROR;
+    this->status_set_warning();
+    return false;
+  }
+  this->reg_[wiper_idx].state--;
+  return true;
+}
+
+uint8_t Mcp4461Component::calc_terminal_connector_byte_(Mcp4461TerminalIdx terminal_connector) {
+  uint8_t i = static_cast<uint8_t>(terminal_connector) <= 1 ? 0 : 2;
+  uint8_t new_value_byte = 0;
+  new_value_byte += static_cast<uint8_t>(this->reg_[i].terminal_b);
+  new_value_byte += static_cast<uint8_t>(this->reg_[i].terminal_w) << 1;
+  new_value_byte += static_cast<uint8_t>(this->reg_[i].terminal_a) << 2;
+  new_value_byte += static_cast<uint8_t>(this->reg_[i].terminal_hw) << 3;
+  new_value_byte += static_cast<uint8_t>(this->reg_[(i + 1)].terminal_b) << 4;
+  new_value_byte += static_cast<uint8_t>(this->reg_[(i + 1)].terminal_w) << 5;
+  new_value_byte += static_cast<uint8_t>(this->reg_[(i + 1)].terminal_a) << 6;
+  new_value_byte += static_cast<uint8_t>(this->reg_[(i + 1)].terminal_hw) << 7;
+  return new_value_byte;
+}
+
+uint8_t Mcp4461Component::get_terminal_register_(Mcp4461TerminalIdx terminal_connector) {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "%s", LOG_STR_ARG(this->get_message_string(this->error_code_)));
+    return 0;
+  }
+  uint8_t reg = static_cast<uint8_t>(terminal_connector) == 0 ? static_cast<uint8_t>(Mcp4461Addresses::MCP4461_TCON0)
+                                                              : static_cast<uint8_t>(Mcp4461Addresses::MCP4461_TCON1);
+  reg |= static_cast<uint8_t>(Mcp4461Commands::READ);
+  uint16_t buf;
+  if (this->read_byte_16(reg, &buf)) {
+    return static_cast<uint8_t>(buf & 0x00ff);
+  } else {
+    this->error_code_ = MCP4461_STATUS_I2C_ERROR;
+    this->status_set_warning();
+    ESP_LOGW(TAG, "Error fetching terminal register value");
+    return 0;
+  }
+}
+
+void Mcp4461Component::update_terminal_register_(Mcp4461TerminalIdx terminal_connector) {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "%s", LOG_STR_ARG(this->get_message_string(this->error_code_)));
+    return;
+  }
+  if ((static_cast<uint8_t>(terminal_connector) != 0 && static_cast<uint8_t>(terminal_connector) != 1)) {
+    return;
+  }
+  uint8_t terminal_data = this->get_terminal_register_(terminal_connector);
+  if (terminal_data == 0) {
+    return;
+  }
+  ESP_LOGV(TAG, "Got terminal register %u data 0x%02X", static_cast<uint8_t>(terminal_connector), terminal_data);
+  uint8_t wiper_index = 0;
+  if (static_cast<uint8_t>(terminal_connector) == 1) {
+    wiper_index = 2;
+  }
+  this->reg_[wiper_index].terminal_b = ((terminal_data >> 0) & 0x01);
+  this->reg_[wiper_index].terminal_w = ((terminal_data >> 1) & 0x01);
+  this->reg_[wiper_index].terminal_a = ((terminal_data >> 2) & 0x01);
+  this->reg_[wiper_index].terminal_hw = ((terminal_data >> 3) & 0x01);
+  this->reg_[(wiper_index + 1)].terminal_b = ((terminal_data >> 4) & 0x01);
+  this->reg_[(wiper_index + 1)].terminal_w = ((terminal_data >> 5) & 0x01);
+  this->reg_[(wiper_index + 1)].terminal_a = ((terminal_data >> 6) & 0x01);
+  this->reg_[(wiper_index + 1)].terminal_hw = ((terminal_data >> 7) & 0x01);
+}
+
+bool Mcp4461Component::set_terminal_register_(Mcp4461TerminalIdx terminal_connector, uint8_t data) {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "%s", LOG_STR_ARG(this->get_message_string(this->error_code_)));
+    return false;
+  }
+  uint8_t addr;
+  if (static_cast<uint8_t>(terminal_connector) == 0) {
+    addr = static_cast<uint8_t>(Mcp4461Addresses::MCP4461_TCON0);
+  } else if (static_cast<uint8_t>(terminal_connector) == 1) {
+    addr = static_cast<uint8_t>(Mcp4461Addresses::MCP4461_TCON1);
+  } else {
+    ESP_LOGW(TAG, "Invalid terminal connector id %u specified", static_cast<uint8_t>(terminal_connector));
+    return false;
+  }
+  if (!(this->mcp4461_write_(addr, data))) {
+    this->error_code_ = MCP4461_STATUS_I2C_ERROR;
+    this->status_set_warning();
+    return false;
+  }
+  return true;
+}
+
+void Mcp4461Component::enable_terminal_(Mcp4461WiperIdx wiper, char terminal) {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "%s", LOG_STR_ARG(this->get_message_string(this->error_code_)));
+    return;
+  }
+  uint8_t wiper_idx = static_cast<uint8_t>(wiper);
+  ESP_LOGV(TAG, "Enabling terminal %c of wiper %u", terminal, wiper_idx);
+  switch (terminal) {
+    case 'h':
+      this->reg_[wiper_idx].terminal_hw = true;
+      break;
+    case 'a':
+      this->reg_[wiper_idx].terminal_a = true;
+      break;
+    case 'b':
+      this->reg_[wiper_idx].terminal_b = true;
+      break;
+    case 'w':
+      this->reg_[wiper_idx].terminal_w = true;
+      break;
+    default:
+      ESP_LOGW(TAG, "Unknown terminal %c specified", terminal);
+      return;
+  }
+  this->reg_[wiper_idx].update_terminal = false;
+}
+
+void Mcp4461Component::disable_terminal_(Mcp4461WiperIdx wiper, char terminal) {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "%s", LOG_STR_ARG(this->get_message_string(this->error_code_)));
+    return;
+  }
+  uint8_t wiper_idx = static_cast<uint8_t>(wiper);
+  ESP_LOGV(TAG, "Disabling terminal %c of wiper %u", terminal, wiper_idx);
+  switch (terminal) {
+    case 'h':
+      this->reg_[wiper_idx].terminal_hw = false;
+      break;
+    case 'a':
+      this->reg_[wiper_idx].terminal_a = false;
+      break;
+    case 'b':
+      this->reg_[wiper_idx].terminal_b = false;
+      break;
+    case 'w':
+      this->reg_[wiper_idx].terminal_w = false;
+      break;
+    default:
+      ESP_LOGW(TAG, "Unknown terminal %c specified", terminal);
+      return;
+  }
+  this->reg_[wiper_idx].update_terminal = false;
+}
+
+uint16_t Mcp4461Component::get_eeprom_value(Mcp4461EepromLocation location) {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "%s", LOG_STR_ARG(this->get_message_string(this->error_code_)));
+    return 0;
+  }
+  uint8_t reg = 0;
+  reg |= static_cast<uint8_t>(Mcp4461EepromLocation::MCP4461_EEPROM_1) + (static_cast<uint8_t>(location) * 0x10);
+  reg |= static_cast<uint8_t>(Mcp4461Commands::READ);
+  uint16_t buf;
+  if (!this->is_eeprom_ready_for_writing_(true)) {
+    return 0;
+  }
+  if (!this->read_byte_16(reg, &buf)) {
+    this->error_code_ = MCP4461_STATUS_I2C_ERROR;
+    this->status_set_warning();
+    ESP_LOGW(TAG, "Error fetching EEPROM location value");
+    return 0;
+  }
+  return buf;
+}
+
+bool Mcp4461Component::set_eeprom_value(Mcp4461EepromLocation location, uint16_t value) {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "%s", LOG_STR_ARG(this->get_message_string(this->error_code_)));
+    return false;
+  }
+  uint8_t addr = 0;
+  if (value > 511) {
+    return false;
+  }
+  if (value > 256) {
+    addr = 1;
+  }
+  addr |= static_cast<uint8_t>(Mcp4461EepromLocation::MCP4461_EEPROM_1) + (static_cast<uint8_t>(location) * 0x10);
+  if (!(this->mcp4461_write_(addr, value, true))) {
+    this->error_code_ = MCP4461_STATUS_I2C_ERROR;
+    this->status_set_warning();
+    ESP_LOGW(TAG, "Error writing EEPROM value");
+    return false;
+  }
+  return true;
+}
+
+bool Mcp4461Component::is_writing_() {
+  /* Read the EEPROM write-active status from the status register */
+  bool writing = static_cast<bool>((this->get_status_register_() >> 4) & 0x01);
+
+  /* If EEPROM is no longer writing, reset the timeout flag */
+  if (!writing) {
+    /* This is protected boolean flag in Mcp4461Component class */
+    this->last_eeprom_write_timed_out_ = false;
+  }
+
+  return writing;
+}
+
+bool Mcp4461Component::is_eeprom_ready_for_writing_(bool wait_if_not_ready) {
+  /* Check initial write status */
+  bool ready_for_write = !this->is_writing_();
+
+  /* Return early if no waiting is required or EEPROM is already ready */
+  if (ready_for_write || !wait_if_not_ready || this->last_eeprom_write_timed_out_) {
+    return ready_for_write;
+  }
+
+  /* Timestamp before starting the loop */
+  const uint32_t start_millis = millis();
+
+  ESP_LOGV(TAG, "Waiting until EEPROM is ready for write, start_millis = %" PRIu32, start_millis);
+
+  /* Loop until EEPROM is ready or timeout is reached */
+  while (!ready_for_write && ((millis() - start_millis) < EEPROM_WRITE_TIMEOUT_MS)) {
+    ready_for_write = !this->is_writing_();
+
+    /* If ready, exit early */
+    if (ready_for_write) {
+      ESP_LOGV(TAG, "EEPROM is ready for new write, elapsed_millis = %" PRIu32, millis() - start_millis);
+      return true;
+    }
+
+    /* Not ready yet, yield before checking again */
+    yield();
+  }
+
+  /* If still not ready after timeout, log error and mark the timeout */
+  ESP_LOGE(TAG, "EEPROM write timeout exceeded (%u ms)", EEPROM_WRITE_TIMEOUT_MS);
+  this->last_eeprom_write_timed_out_ = true;
+
+  return false;
+}
+
+bool Mcp4461Component::mcp4461_write_(uint8_t addr, uint16_t data, bool nonvolatile) {
+  uint8_t reg = data > 0xff ? 1 : 0;
+  uint8_t value_byte = static_cast<uint8_t>(data & 0x00ff);
+  ESP_LOGV(TAG, "Writing value %u to address %u", data, addr);
+  reg |= addr;
+  reg |= static_cast<uint8_t>(Mcp4461Commands::WRITE);
+  if (nonvolatile) {
+    if (this->write_protected_) {
+      ESP_LOGW(TAG, "%s", LOG_STR_ARG(this->get_message_string(MCP4461_WRITE_PROTECTED)));
+      return false;
+    }
+    if (!this->is_eeprom_ready_for_writing_(true)) {
+      return false;
+    }
+  }
+  return this->write_byte(reg, value_byte);
+}
+}  // namespace mcp4461
+}  // namespace esphome